Solvent- and Wavelength-Dependent Photoluminescence Relaxation Dynamics of Carbon Nanotube sp3 Defect States

Easy Access to Bright Oxygen Defects in Biocompatible Single-Walled Carbon Nanotubes via a Fenton-like Reaction

The covalent functionalization of single-walled carbon nanotubes (SWNTs) with luminescent oxygen defects increases their brightness and enables their application as optical biosensors or fluorescent probes for in vivo imaging in the second-biological window (NIR-II). However, obtaining luminescent defects with high brightness is challenging with the current functionalization methods due to a restricted window of reaction conditions or the necessity for controlled irradiation with ultraviolet light. Here, we report a method for introducing luminescent oxygen defects via a Fenton-like reaction that uses benign and inexpensive chemicals without light irradiation. (6,5) SWNTs in aqueous dispersion functionalized with this method show bright E11* emission (1105 nm) with 3.2 times higher peak intensities than the pristine E11 emission and a reproducible photoluminescence quantum yield of 3%. The functionalization can be performed within a wide range of reaction parameters and even with unsorted nanotube raw material at high concentrations (100 mg L-1), giving access to large amounts of brightly luminescent SWNTs. We further find that the introduced oxygen defects rearrange under light irradiation, which gives additional insights into the structure and dynamics of oxygen defects. Finally, the functionalization of ultrashort SWNTs with oxygen defects also enables high photoluminescence quantum yields. Their excellent emission properties are retained after surfactant exchange with biocompatible pegylated phospholipids or single-stranded DNA to make them suitable for in vivo NIR-II imaging and dopamine sensing.

Correlation Measurements for Carbon Nanotubes with Quantum Defects

Single-photon sources are essential building blocks for the development of photonic quantum technology. Regarding potential practical application, an on-demand electrically driven quantum-light emitter on a chip is notably crucial for photonic integrated circuits. Here, we propose functionalized single-walled carbon nanotube field-effect transistors as a promising solid-state quantum-light source by demonstrating photon antibunching behavior via electrical excitation. The sp3 quantum defects were formed on the surface of (7, 5) carbon nanotubes by 3,5-dichlorophenyl functionalization, and individual carbon nanotubes were wired to graphene electrode pairs. Filtered electroluminescent defect-state emission at 77 K was coupled into a Hanbury Brown and Twiss experiment setup, and single-photon emission was observed by performing second-order correlation function measurements. We discuss the dependence of the intensity correlation measurement on electrical power and emission wavelength, highlighting the challenges of performing such measurements while simultaneously analyzing acquired data. Our results indicate a route toward room-temperature electrically triggered single-photon emission.

Photo-Activated, Solid-State Introduction of Luminescent Oxygen Defects into Semiconducting Single-Walled Carbon Nanotubes

Oxygen defects in semiconducting single-walled carbon nanotubes (SWCNTs) are localized disruptions in the carbon lattice caused by the formation of epoxy or ether groups, commonly through wet-chemical reactions. The associated modifications of the electronic structure can result in luminescent states with emission energies below those of pristine SWCNTs in the near-infrared range, which makes them promising candidates for applications in biosensing and as single-photon emitters. Here, we demonstrate the controlled introduction of luminescent oxygen defects into networks of monochiral (6,5) SWCNTs using a solid-state photocatalytic approach. UV irradiation of SWCNTs on the photoreactive surfaces of the transition metal oxides TiOx and ZnOx in the presence of trace amounts of water and oxygen results in the creation of reactive oxygen species that initiate radical reactions with the carbon lattice and the formation of oxygen defects. The created ether-d and epoxide-l defect configurations give rise to two distinct red-shifted emissive features. The chemical and dielectric properties of the photoactive oxides influence the final defect emission properties, with oxygen-functionalized SWCNTs on TiOx substrates being brighter than those on ZnOx or pristine SWCNTs on glass. The photoinduced functionalization of nanotubes is further employed to create lateral patterns of oxygen defects in (6,5) SWCNT networks with micrometer resolution and thus spatially controlled defect emission.

Ratiometric fluorescent sensing of pyrophosphate with sp³-functionalized single-walled carbon nanotubes

Inorganic pyrophosphate is a key molecule in many biological processes from DNA synthesis to cell metabolism. Here we introduce sp3-functionalized (6,5) single-walled carbon nanotubes (SWNTs) with red-shifted defect emission as near-infrared luminescent probes for the optical detection and quantification of inorganic pyrophosphate. The sensing scheme is based on the immobilization of Cu2+ ions on the SWNT surface promoted by coordination to covalently attached aryl alkyne groups and a triazole complex. The presence of Cu2+ ions on the SWNT surface causes fluorescence quenching via photoinduced electron transfer, which is reversed by copper-complexing analytes such as pyrophosphate. The differences in the fluorescence response of sp3-defect to pristine nanotube emission enables reproducible ratiometric measurements in a wide concentration window. Biocompatible, phospholipid-polyethylene glycol-coated SWNTs with such sp3 defects are employed for the detection of pyrophosphate in cell lysate and for monitoring the progress of DNA synthesis in a polymerase chain reaction. This robust ratiometric and near-infrared luminescent probe for pyrophosphate may serve as a starting point for the rational design of nanotube-based biosensors.

Tuning Electroluminescence from Functionalized SWCNT Networks Further into the Near-Infrared

Near-infrared electroluminescence from carbon-based emitters, especially in the second biological window (NIR-II) or at telecommunication wavelengths, is difficult to achieve. Single-walled carbon nanotubes (SWCNTs) have been proposed as a possible solution due to their tunable and narrowband emission in the near-infrared region and high charge carrier mobilities. Furthermore, the covalent functionalization of SWCNTs with a controlled number of luminescent sp3 defects leads to even more red-shifted photoluminescence with enhanced quantum yields. Here, we demonstrate that by tailoring the binding configuration of the introduced sp3 defects and hence tuning their optical trap depth, we can generate emission from polymer-sorted (6,5) and (7,5) nanotubes that is mainly located in the telecommunication O-band (1260-1360 nm). Networks of these functionalized nanotubes are integrated in ambipolar, light-emitting field-effect transistors to yield the corresponding narrowband near-infrared electroluminescence. Further investigation of the current- and carrier density-dependent electro- and photoluminescence spectra enables insights into the impact of different sp3 defects on charge transport in networks of functionalized SWCNTs.

On-the-Fly Nonadiabatic Dynamics Simulations of Single-Walled Carbon Nanotubes with Covalent Defects

Single-walled carbon nanotubes (SWCNTs) with covalent surface defects have been explored recently due to their promise for use in single-photon telecommunication emission and in spintronic applications. The all-atom dynamic evolution of electrostatically bound excitons (the primary electronic excitations) in these systems has only been loosely explored from a theoretical perspective due to the size limitations of these large systems (>500 atoms). In this work, we present computational modeling of nonradiative relaxation in a variety of SWCNT chiralities with single-defect functionalizations. Our excited-state dynamics modeling uses a trajectory surface hopping algorithm accounting for excitonic effects with a configuration interaction approach. We find a strong chirality and defect-composition dependence on the population relaxation (varying over 50-500 fs) between the primary nanotube band gap excitation E₁₁ and the defect-associated, single-photon-emitting E₁₁* state. These simulations give direct insight into the relaxation between the band-edge states and the localized excitonic state, in competition with dynamic trapping/detrapping processes observed in experiment. Engineering fast population decay into the quasi-two-level subsystem with weak coupling to higher-energy states increases the effectiveness and controllability of these quantum light emitters.

Azide modification forming luminescent sp2 defects on single-walled carbon nanotubes for near-infrared defect photoluminescence

Azide functionalization produced luminescent sp²-type defects on single-walled carbon nanotubes, by which defect photoluminescence appeared in near infrared regions (1116 nm). Changes in exciton properties were induced by localization effects at the defect sites, creating exciton-engineered nanomaterials based on the defect structure design.

Formation of organic color centers in air-suspended carbon nanotubes using vapor-phase reaction

Organic color centers in single-walled carbon nanotubes have demonstrated exceptional ability to generate single photons at room temperature in the telecom range. Combining the color centers with pristine air-suspended nanotubes would be desirable for improved performance, but all current synthetic methods occur in solution which makes them incompatible. Here we demonstrate the formation of color centers in air-suspended nanotubes using a vapor-phase reaction. Functionalization is directly verified by photoluminescence spectroscopy, with unambiguous statistics from more than a few thousand individual nanotubes. The color centers show strong diameter-dependent emission, which can be explained with a model for chemical reactivity considering strain along the tube curvature. We also estimate the defect density by comparing the experiments with simulations based on a one-dimensional exciton diffusion equation. Our results highlight the influence of the nanotube structure on vapor-phase reactivity and emission properties, providing guidelines for the development of high-performance near-infrared quantum light sources.

Organic color centers in single-walled carbon nanotubes can act as single-photon sources in the telecom range. Here the authors report the functionalization of air-suspended nanotubes through a vapor-phase photochemical reaction, demonstrating a further tailoring of quantum emitter materials.

Biosensing with Fluorescent Carbon Nanotubes

Biosensors are powerful tools for modern basic research and biomedical diagnostics. Their development requires substantial input from the chemical sciences. Sensors or probes with an optical readout, such as fluorescence, offer rapid, minimally invasive sensing of analytes with high spatial and temporal resolution. The near-infrared (NIR) region is beneficial because of the reduced background and scattering of biological samples (tissue transparency window) in this range. In this context, single-walled carbon nanotubes (SWCNTs) have emerged as versatile NIR fluorescent building blocks for biosensors. Here, we provide an overview of advances in SWCNT-based NIR fluorescent molecular sensors. We focus on chemical design strategies for diverse analytes and summarize insights into the photophysics and molecular recognition. Furthermore, different application areas are discussed-from chemical imaging of cellular systems and diagnostics to in vivo applications and perspectives for the future.

Stable Near-Infrared Photoluminescence of Single-Walled Carbon Nanotubes Dispersed Using a Coconut-Based Natural Detergent

We prepared single-walled carbon nanotube (SWNT) suspensions in phosphate buffer solutions containing 1% of a coconut-based natural detergent (COCO) or 1% of sodium dodecyl sulfate (SDS). The suspensions exhibited strong photoluminescence (PL) in the near-infrared region, suggesting that the SWNTs, such as those with (9, 4) and (7, 6) chiralities, were monodispersed. Upon diluting the suspensions with a detergent-free phosphate buffer solution, the PL intensity of the SDS-containing SWNT suspension was significantly lower than that of the COCO-containing SWNT suspension. The COCO-containing SWNT suspension was more stable than the SDS-containing SWNT suspension. The SWNT concentration of the suspensions prepared via bath-type sonication was lower than that of the suspensions prepared via probe-type sonication. However, near-infrared (NIR) PL intensity of the SWNT suspensions prepared via bath-type sonication was much higher than that of the SWNT suspensions prepared via probe-type sonication regardless of the detergent. This suggested that the fraction of monodispersed SWNTs of the suspensions prepared via bath-type sonication was larger than that of the suspensions prepared via probe-type sonication, although the SWNT concentration was low. Our results indicated that COCO favored the fabrication of SWNT suspensions with stable and strong NIR PL, which are useful for various biological applications.

Coupling between Emissive Defects on Carbon Nanotubes: Modeling Insights

Covalent functionalization of single-walled carbon nanotubes (SWCNTs) with organic molecules results in red-shifted emissive states associated with sp³-defects in the tube lattice, which facilitate their improved optical functionality, including single-photon emission. The energy of the defect-based electronic excitations (excitons) depends on the molecular adducts, the configuration of the defect, and concentration of defects. Here we model the interactions between two sp³-defects placed at various distances in the (6,5) SWCNT using time-dependent density functional theory. Calculations reveal that these interactions conform to the effective model of J-aggregates for well-spaced defects (>2 nm), leading to a red-shifted and optically allowed (bright) lowest energy exciton. H-aggregate behavior is not observed for any defect orientations, which is beneficial for emission. The splitting between the lowest energy bright and optically forbidden (dark) excitons and the pristine excitonic band are controlled by the single-defect configurations and their axial separation. These findings enable a synthetic design strategy for SWCNTs with tunable near-infrared emission.

Quantum Light Emission from Coupled Defect States in DNA-Functionalized Carbon Nanotubes

Solid-state single-photon sources are essential building blocks for quantum photonics and quantum information technologies. This study demonstrates promising single-photon emission from quantum defects generated in single-wall carbon nanotubes (SWCNTs) by covalent reaction with guanine nucleotides in their single-stranded DNA coatings. Low-temperature photoluminescence spectroscopy and photon-correlation measurements on individual guanine-functionalized SWCNTs (GF-SWCNTs) indicate that multiple, closely spaced guanine defect sites within a single ssDNA strand collectively form an exciton trapping potential that supports a localized quantum state capable of room-temperature single-photon emission. In addition, exciton traps from adjacent ssDNA strands are weakly coupled to give cross-correlations between their separate photon emissions. Theoretical modeling identifies coupling mechanism as a capture of band-edge excitons. Because the spatial pattern of nanotube functionalization sites can be readily controlled by selecting ssDNA base sequences, GF-SWCNTs should become a versatile family of quantum light emitters with engineered properties.

Charge Transport in and Electroluminescence from sp3-Functionalized Carbon Nanotube Networks

The controlled covalent functionalization of semiconducting single-walled carbon nanotubes (SWCNTs) with luminescent sp³ defects leads to additional narrow and tunable photoluminescence features in the near-infrared and even enables single-photon emission at room temperature, thus strongly expanding their application potential. However, the successful integration of sp³-functionalized SWCNTs in optoelectronic devices with efficient defect state electroluminescence not only requires control over their emission properties but also a detailed understanding of the impact of functionalization on their electrical performance, especially in dense networks. Here, we demonstrate ambipolar, light-emitting field-effect transistors based on networks of pristine and functionalized polymer-sorted (6,5) SWCNTs. We investigate the influence of sp³ defects on charge transport by employing electroluminescence and (charge-modulated) photoluminescence spectroscopy combined with temperature-dependent current-voltage measurements. We find that sp³-functionalized SWCNTs actively participate in charge transport within the network as mobile carriers efficiently sample the sp³ defects, which act as shallow trap states. While both hole and electron mobilities decrease with increasing degree of functionalization, the transistors remain fully operational, showing electroluminescence from the defect states that can be tuned by the defect density.

Photoluminescence quenching of thermally treated waste-derived carbon dots for selective metal ion sensing

In the present study, carbon-dots (CDs) were derived from the thermal oxidation of an agricultural waste, bitter tea residue, to obtain different sp²/sp³ ratios and electronic structures for metal sensing. The CDs obtained from calcination at 700 °C exhibited the highest photoluminescence (PL) quantum yield (QY) of 11.8% among all the samples treated at different temperatures. These CDs had a high degree of graphitization, which resulted in a strong π-π* electron transition, and hence in a high QY. The strong photoluminescence of the CDs could be used to sense the metal ions Ag⁺, Sr²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, and Sn²⁺ by monitoring their PL intensity at an excitation wavelength of 320 nm. The metals inhibited the PL intensity in the order Ag⁺ > Fe²⁺, Fe³⁺, Ni²⁺ > Sr²⁺, Co²⁺, Cu²⁺, Sn²⁺, which demonstrated that the CDs exhibited high metal ion detection capability and selectivity. The detection of Fe³⁺ using CDs was performed in the range of 10-100 ppm with a LOD (limit of detection) value of 0.380 ppm. Theoretical calculations demonstrated that Ag⁺, Sr²⁺, and Sn²⁺ induced charge transfer excitation and that Fe²⁺ and Ni²⁺ induced d-d transitions via complexation with the sp² clusters. The charge transfer excitation and d-d transitions hindered the π-π* transition of the sp² clusters, leading to a quenching effect. On the other hand, Li⁺, Na⁺, and K⁺ ions did not alter the π-π* transition of the sp² clusters, resulting in a negligible quenching effect. In summary, the oxidation level and electronic structure of CDs derived from bitter tea residue could be tailored, and the CDs were shown to be a facile, sustainable, and eco-friendly material for metal sensing.

Synthetic control over the binding configuration of luminescent sp3-defects in single-walled carbon nanotubes

The controlled functionalization of single-walled carbon nanotubes with luminescent sp³-defects has created the potential to employ them as quantum-light sources in the near-infrared. For that, it is crucial to control their spectral diversity. The emission wavelength is determined by the binding configuration of the defects rather than the molecular structure of the attached groups. However, current functionalization methods produce a variety of binding configurations and thus emission wavelengths. We introduce a simple reaction protocol for the creation of only one type of luminescent defect in polymer-sorted (6,5) nanotubes, which is more red-shifted and exhibits longer photoluminescence lifetimes than the commonly obtained binding configurations. We demonstrate single-photon emission at room temperature and expand this functionalization to other polymer-wrapped nanotubes with emission further in the near-infrared. As the selectivity of the reaction with various aniline derivatives depends on the presence of an organic base we propose nucleophilic addition as the reaction mechanism.

Covalent functionalization of single-walled carbon nanotubes with luminescent sp³-defects generally produces a variety of binding configurations and emission wavelengths. The authors propose a base-mediated nucleophilic functionalization approach to selectively achieve configurations for E₁₁* and E₁₁*^- or purely E₁₁*^- defect emission.

Interaction of Luminescent Defects in Carbon Nanotubes with Covalently Attached Stable Organic Radicals

The functionalization of single-walled carbon nanotubes (SWCNTs) with luminescent sp³ defects has greatly improved their performance in applications such as quantum light sources and bioimaging. Here, we report the covalent functionalization of purified semiconducting SWCNTs with stable organic radicals (perchlorotriphenylmethyl, PTM) carrying a net spin. This model system allows us to use the near-infrared photoluminescence arising from the defect-localized exciton as a highly sensitive probe for the short-range interaction between the PTM radical and the SWCNT. Our results point toward an increased triplet exciton population due to radical-enhanced intersystem crossing, which could provide access to the elusive triplet manifold in SWCNTs. Furthermore, this simple synthetic route to spin-labeled defects could enable magnetic resonance studies complementary to in vivo fluorescence imaging with functionalized SWCNTs and facilitate the scalable fabrication of spintronic devices with magnetically switchable charge transport.

Photoluminescence Dynamics Defined by Exciton Trapping Potential of Coupled Defect States in DNA-Functionalized Carbon Nanotubes

Chemical reactions between semiconducting single-wall carbon nanotubes (SWCNTs) and single-stranded DNA (ssDNA) achieve spatially patterned covalent functionalization sites and create coupled fluorescent quantum defects on the nanotube surface, tailoring SWCNT photophysics for applications such as single-photon emitters in quantum information technologies. The evaluation of relaxation dynamics of photoluminescence (PL) from those coupled quantum defects is essential for understanding the nanotube electronic structure and beneficial to the design of quantum light emitters. Here, we measured the PL decay for ssDNA-functionalized SWCNTs as a function of the guanine content of the ssDNA oligo that dictates the red-shifting of their PL emission peaks relative to the band-edge exciton. We then correlate the observed dependence of PL decay dynamics on energy red-shifts to the exciton potential energy landscape, which is modeled using first-principles approaches based upon the morphology of ssDNA-altered SWCNTs obtained by atomic force microscopy (AFM) imaging. Our simulations illustrate that the multiple guanine defects introduced within a single ssDNA strand strongly interact to create a deep exciton trapping well, acting as a single hybrid trap. The emission decay from the distinctive trapping potential landscape is found to be biexponential for ssDNA-modified SWCNTs. We attributed the fast time component of the biexponential PL decay to the redistribution of exciton population among the lowest energy bright states and a manifold of dark states emerging from the coupling of multiple guanine defects. The long lifetime component in the biexponential decay, on the other hand, is attributed to the redistribution of exciton population among different exciton trapping sites that arise from the binding of multiple ssDNA strands along the nanotube axis. AFM measurements indicate that those trapping sites are separated on average by ∼8 nm along the nanotube axis.

Population of Exciton-Polaritons via Luminescent sp3 Defects in Single-Walled Carbon Nanotubes

Semiconducting single-walled carbon nanotubes (SWCNTs) are an interesting material for strong-light matter coupling due to their stable excitons, narrow emission in the near-infrared region, and high charge carrier mobilities. Furthermore, they have emerged as quantum light sources as a result of the controlled introduction of luminescent quantum defects (sp³ defects) with red-shifted transitions that enable single-photon emission. The complex photophysics of SWCNTs and the overall goal of polariton condensation pose the question of how exciton-polaritons are populated and how the process might be optimized. The contributions of possible relaxation processes, i.e., scattering with acoustic phonons, vibrationally assisted scattering, and radiative pumping, are investigated using angle-resolved reflectivity and time-resolved photoluminescence measurements on microcavities with a wide range of detunings. We show that the predominant population mechanism for SWCNT exciton-polaritons in planar microcavities is radiative pumping. Consequently, the limitation of polariton population due to the low photoluminescence quantum yield of nanotubes can be overcome by luminescent sp³ defects. Without changing the polariton branch structure, radiative pumping through these emissive defects leads to an up to 10-fold increase of the polariton population for detunings with a large photon fraction. Thus, the controlled and tunable functionalization of SWCNTs with sp³ defects presents a viable route toward bright and efficient polariton devices.

Structural rigidity accelerates quantum decoherence and extends carrier lifetime in porphyrin nanoballs: a time domain atomistic simulation

Nonradiative electron-hole (e-h) recombination is the primary source of energy loss in photovoltaic cells and inevitably, it competes with the charge transfer process, leading to poor device performance. Therefore, much attention has to be paid for delaying such processes; increasing the excitonic lifetime may be a solution for this. Using the real-time, density functional tight-binding theory (DFTB) combined with nonadiabatic molecular dynamics (NAMD) simulations, we demonstrate the exciton relaxation phenomena of different metal-centered porphyrin nanoballs, which are supposed to be very important for the light-harvesting process. It has been revealed that the carrier recombination rate gradually decreases with the increase in the molecular stiffness by introducing metal-coordinating templating agents into the nanoball. Our simulation demonstrates that the lower atomic fluctuations lead to poorer electron-phonon nonadiabatic coupling in association with weak phonon modes and these as a whole are responsible for shorter quantum coherence and hence delayed recombination events. Our analysis is in good agreement with the recent experimental observation. By replacing the Zn metal center with a heavier Cd atom, a similar trend is observed; however, the rate slows down abruptly. The present simulation study provides the fundamental mechanism in detail behind the undesired energy loss during exciton recombination and suggests a rational design of impressive nanosystems for future device fabrication.

Exciton relaxation in carbon nanotubes via electronic-to-vibrational energy transfer

Covalent functionalization of semiconducting single-wall carbon nanotubes (CNTs) introduces new photoluminescent emitting states. These states are spatially localized around functionalization sites and strongly red-shifted relative to the emission commonly observed from the CNT band-edge exciton state. A particularly important feature of these localized exciton states is that because the exciton is no longer free to diffusively sample photoluminescent quenching sites along the CNT length, its lifetime is significantly extended. We have recently demonstrated that an important relaxation channel of such localized excitons is the electronic-to-vibrational energy transfer (EVET). This process is analogous to the Förster resonance energy transfer except the final state of this process is not electronically, but vibrationally excited molecules of the surrounding medium (e.g., solvent). In this work, we develop a theory of EVET for a nanostructure of arbitrary shape and apply it to the specific case of EVET-mediated relaxation of defect-localized excitons in a covalently functionalized CNT. The resulting EVET relaxation times are in good agreement with experimental data.

Brightening of Long, Polymer-Wrapped Carbon Nanotubes by sp3 Functionalization in Organic Solvents

The functionalization of semiconducting single-walled carbon nanotubes (SWNTs) with sp3 defects that act as luminescent exciton traps is a powerful means to enhance their photoluminescence quantum yield (PLQY) and to add optical properties. However, the synthetic methods employed to introduce these defects are currently limited to aqueous dispersions of surfactant-coated SWNTs, often with short tube lengths, residual metallic nanotubes, and poor film-formation properties. In contrast to that, dispersions of polymer-wrapped SWNTs in organic solvents feature unrivaled purity, higher PLQY, and are easily processed into thin films for device applications. Here, we introduce a simple and scalable phase-transfer method to solubilize diazonium salts in organic nonhalogenated solvents for the controlled reaction with polymer-wrapped SWNTs to create luminescent aryl defects. Absolute PLQY measurements are applied to reliably quantify the defect-induced brightening. The optimization of defect density and trap depth results in PLQYs of up to 4% with 90% of photons emitted through the defect channel. We further reveal the strong impact of initial SWNT quality and length on the relative brightening by sp3 defects. The efficient and simple production of large quantities of defect-tailored polymer-sorted SWNTs enables aerosol-jet printing and spin-coating of thin films with bright and nearly reabsorption-free defect emission, which are desired for carbon nanotube-based near-infrared light-emitting devices.

Intrinsic limits of defect-state photoluminescence dynamics in functionalized carbon nanotubes

Defect states introduced to single wall carbon nanotubes (SWCNTs) by covalent functionalization give rise to novel photophysics and are showing promise as sources of room-temperature quantum emission of interest for quantum information technologies. Evaluation of their ultimate potential for such needs requires a knowledge of intrinsic dynamic and coherence behaviors. Here we probe population relaxation and dephasing time (T1 and T2, respectively) of defect states following deposition of functionalized SWCNTs on polystyrene substrates that are subjected to an isopropanol rinse to remove surfactant. Low-temperature (4 K) photo-luminescence linewidths (∼100 μeV) following surfactant removal are a factor of ten narrower than those for unrinsed SWCNTs. Measured recombination lifetimes, on the order of 1.5 ns, compare well with those estimated from DFT calculations, indicating that the intrinsic radiatively-limited lifetime is approached following this sample treatment. Dephasing times evaluated directly through an interferometric approach compare closely to those established by photoluminescence linewidths. Dephasing times as high as 12 ps are found; a factor of up to 6 times greater than those evaluated for band-edge exciton states. Such enhancement of dephasing and photoluminescence lifetime behavior is a direct consequence of exciton localization at the SWCNT defect sites.

Photoluminescence Intensity Fluctuations and Temperature-Dependent Decay Dynamics of Individual Carbon Nanotube sp3 Defects

Recent demonstration of room temperature, telecommunication wavelength single photon generation by sp³ defects of single wall carbon nanotubes established these defects as a new class of quantum materials. However, their practical utilization in development of quantum light sources calls for a significant improvement in their imperfect quantum yield (QY∼10-30%). PL intensity fluctuations observed with some defects also need to be eliminated. Aiming toward attaining fundamental understanding necessary for addressing these critical issues, we investigate PL intensity fluctuation and PL decay dynamics of aryl sp³ defects of (6,5), (7,5), and (10,3) single wall carbon nanotubes (SWCNTs) at temperatures ranging from 300 to 4 K. By correlating defect-state PL intensity fluctuations with change (or lack of change) in PL decay dynamics, we identified random variations in the trapping efficiency of E₁₁ band-edge excitons (likely resulting from the existence of a fluctuating potential barrier in the vicinity of the defect) as the mechanism mainly responsible for the defect PL intensity fluctuations. Furthermore, by analyzing the temperature dependence of PL intensity and decay dynamics of individual defects based on a kinetic model involving the trapping and detrapping of excitons by optically allowed and forbidden (bright and dark) defect states, we estimate the height of the potential barrier to be in the 3-22 meV range. Our analysis also provides further confirmation of recent DFT simulation results that the emissive sp³ defect state is accompanied by an energetically higher-lying optically forbidden (dark) exciton state.

Solvatochromism of near infrared photoluminescence from doped sites of locally functionalized single-walled carbon nanotubes

The doped sites of locally functionalized single-walled carbon nanotubes emit red-shifted and bright near-infrared photoluminescence compared to non-doped nanotubes. Here, we observe unique photoluminescent solvatochromism. Organic solvent environments induce photoluminescent energy shifts that linearly correlate with a solvent polarity function. A high responsiveness at the doped sites is found.