Efficient Water Transport and Solar Steam Generation via Radially, Hierarchically Structured Aerogels

Efficient solar-driven crude oil cleanup via graphene/cellulose aerogel with radial and centrosymmetric design

Frequent oil spills pose significant threats to ecosystems; therefore, strict requirements are needed for prompt remediation and reclamation of spilled oil. Influenced by the structure of coniferous trees and their water transport, this experiment used cellulose nanofiber (CNF), polyvinyl alcohol (PVA), and methyltrimethoxysilane (MTMS) to prepare radially centrosymmetric aerogels. By utilizing the in-situ polycondensation reaction of MTMS, CNF, and PVA were connected, and the hydrophobicity and mechanical properties of the aerogel were greatly enhanced. Furthermore, the introduction of graphene oxide (GO), enshrouded within the cross-linked network, engenders heightened photo-thermal effects. The resultant composite aerogel exhibits expeditious oil absorption under solar irradiation and radial layered channel architecture, significantly curtailing the crude oil absorption timeframe (achieving a maximum absorption capacity of 51.7 g/g). Moreover, it demonstrates superior performance in rapidly and repeatedly adsorbing highly viscous crude oil, surpassing existing literature. Notably, continuous absorption of high-viscosity crude oil is achieved by integrating the composite aerogel with a peristaltic pump. This study offers a novel approach to the absorption and retrieval of high-viscosity crude oil, broadening the potential application horizons of CNF-based aerogels within environmental remediation.

Renewable biomass-based aerogels: from structural design to functional regulation

Global population growth and industrialization have exacerbated the nonrenewable energy crises and environmental issues, thereby stimulating an enormous demand for producing environmentally friendly materials. Typically, biomass-based aerogels (BAs), which are mainly composed of biomass materials, show great application prospects in various fields because of their exceptional properties such as biocompatibility, degradability, and renewability. To improve the performance of BAs to meet the usage requirements of different scenarios, a large number of innovative works in the past few decades have emphasized the importance of micro-structural design in regulating macroscopic functions. Inspired by the ubiquitous random or regularly arranged structures of materials in nature ranging from micro to meso and macro scales, constructing different microstructures often corresponds to completely different functions even with similar biomolecular compositions. This review focuses on the preparation process, design concepts, regulation methods, and the synergistic combination of chemical compositions and microstructures of BAs with different porous structures from the perspective of gel skeleton and pore structure. It not only comprehensively introduces the effect of various microstructures on the physical properties of BAs, but also analyzes their potential applications in the corresponding fields of thermal management, water treatment, atmospheric water harvesting, CO2 absorption, energy storage and conversion, electromagnetic interference (EMI) shielding, biological applications, etc. Finally, we provide our perspectives regarding the challenges and future opportunities of BAs. Overall, our goal is to provide researchers with a thorough understanding of the relationship between the microstructures and properties of BAs, supported by a comprehensive analysis of the available data.

Grooved Microneedle Patch Augments Adoptive T Cell Therapy Against Solid Tumors via Diverting Regulatory T Cells

The efficacy of adoptive T cell therapy (ACT) for the treatment of solid tumors remains challenging. In addition to the poor infiltration of effector T (Teff) cells limited by the physical barrier surrounding the solid tumor, another major obstacle is the extensive infiltration of regulatory T (Treg) cells, a major immunosuppressive immune cell subset, in the tumor microenvironment. Here, this work develops a grooved microneedle patch for augmenting ACT, aiming to simultaneously overcome physical and immunosuppressive barriers. The microneedles are engineered through an ice-templated method to generate the grooved structure for sufficient T-cell loading. In addition, with the surface modification of chemokine CCL22, the MNs could not only directly deliver tumor-specific T cells into solid tumors through physical penetration, but also specifically divert Treg cells from the tumor microenvironment to the surface of the microneedles via a cytokine concentration gradient, leading to an increase in the ratio of Teff cells/Treg cells in a mouse melanoma model. Consequently, this local delivery strategy of both T cell receptor T cells and chimeric antigen receptor T cells via the CCL22-modified grooved microneedles as a local niche could significantly enhance the antitumor efficacy and reduce the on-target off-tumor toxicity of ACT.

Tree-Inspired Structurally Graded Aerogel with Synergistic Water, Salt, and Thermal Transport for High-Salinity Solar-Powered Evaporation

Solar-powered interfacial evaporation is an energy-efficient solution for water scarcity. It requires solar absorbers to facilitate upward water transport and limit the heat to the surface for efficient evaporation. Furthermore, downward salt ion transport is also desired to prevent salt accumulation. However, achieving simultaneously fast water uptake, downward salt transport, and heat localization is challenging due to highly coupled water, mass, and thermal transport. Here, we develop a structurally graded aerogel inspired by tree transport systems to collectively optimize water, salt, and thermal transport. The arched aerogel features root-like, fan-shaped microchannels for rapid water uptake and downward salt diffusion, and horizontally aligned pores near the surface for heat localization through maximizing solar absorption and minimizing conductive heat loss. These structural characteristics gave rise to consistent evaporation rates of 2.09 kg m-2 h-1 under one-sun illumination in a 3.5 wt% NaCl solution for 7 days without degradation. Even in a high-salinity solution of 20 wt% NaCl, the evaporation rates maintained stable at 1.94 kg m-2 h-1 for 8 h without salt crystal formation. This work offers a novel microstructural design to address the complex interplay of water, salt, and thermal transport.

Antigravity Autonomous Superwettable Pumps for Spontaneous Separation of Oil-Water Emulsions

Oil-water separation based on superwettable materials offers a promising way for the treatment of oil-water mixtures and emulsions. Nevertheless, such separation techniques often require complex devices and external energy input. Therefore, it remains a great challenge to separate oil-water mixtures and emulsions through an energy-efficient, economical, and sustainable way. Here, a novel approach demonstrating the successful separation of oil-water emulsions using antigravity-driven autonomous superwettable pumps is presented. By transitioning from traditional gravity-driven to antigravity-driven separation, the study showcases the unprecedented success in purifying oil/water from emulsions by capillary/siphon-driven superwettable autonomous pumps. These pumps, composed of self-organized interconnected channels formed by the packing of superhydrophobic and superhydrophilic sand particles, exhibit outstanding separation flux, efficiency, and recyclability. The findings of this study not only open up a new avenue for oil-water emulsion separation but also hold promise for profound impacts in the field.

KOH Activated Carbon Coated 3D Wood Solar Evaporator with Highest Water Transport Height and Evaporation Rate for Clean Water Production

The water evaporation rate of 3D solar evaporator heavily relies on the water transport height of the evaporator. In this work, a 3D solar evaporator featuring a soil capillary-like structure is designed by surface coating native balsa wood using potassium hydroxide activated carbon (KAC). This KAC-coated wood evaporator can transport water up to 32 cm, surpassing that of native wood by ≈8 times. Moreover, under 1 kW m-2 solar radiation without wind, the KAC-coated wood evaporator exhibits a remarkable water evaporation rate of 25.3 kg m-2 h-1, ranking among the highest compared with other reported evaporators. The exceptional water transport capabilities of the KAC-coated wood should be attributed to the black and hydrophilic KAC film, which creates a porous network resembling a soil capillary structure to facilitate efficient water transport. In the porous network of coated KAC film, the small internal pores play a pivotal role in achieving rapid capillary condensation, while the larger interstitial channels store condensed water, further promoting water transport up more and micropore capillary condensation. Moreover, this innovative design demonstrates efficacy in retarding phenol from wastewater through absorption onto the coated KAC film, thus presenting a new avenue for high-efficiency clean water production.

Reed-root-based solar-driven evaporator with a faster capillary water transfer rate for effective steam generation

Solar-driven steam evaporation technology, known for its low energy consumption and environmental friendliness, has emerged as a promising approach for seawater desalination, wastewater purification, etc. However, creating a low-cost solar evaporation system that simultaneously achieves rapid water transport, efficient light absorption, and salt tolerance remains challenging. Here, a dual-layer evaporator based on reed roots has been developed after a simple H2O2 delignification treatment and flame treatment, which exhibited enhanced water transport performance and photothermal properties. As excepted, delignification treatment enhanced the capillary water transport ability of reed roots, which is conducive to promoting the dilution of salt in the evaporator and preventing salt deposition. The evaporator demonstrates an impressive steam generation efficiency of 83.5 % and a remarkable water evaporation rate of 1.407 kg m-2 h-1 under 1 sun, thanks to its well-designed structure and optimized performance. Moreover, the evaporator exhibited excellent practical performance for outdoor applications and demonstrates a remarkable capacity for sewage purification, effectively treating heavy metal ion wastewater as well as dye wastewater. As a result, the objective of our research is to explore opportunities for the implementation of deployable, cost-effective, low-carbon-footprint solar water purification systems, particularly for some impoverished regions, to ensure the provision of high-quality water.

Developing Salt-Rejecting Evaporators for Solar Desalination: A Critical Review

Solar desalination, a green, low-cost, and sustainable technology, offers a promising way to get clean water from seawater without relying on electricity and complex infrastructures. However, the main challenge faced in solar desalination is salt accumulation, either on the surface of or inside the solar evaporator, which can impair solar-to-vapor efficiency and even lead to the failure of the evaporator itself. While many ideas have been tried to address this ″salt accumulation″, scientists have not had a clear system for understanding what works best for the enhancement of salt-rejecting ability. Therein, for the first time, we classified the state-of-the-art salt-rejecting designs into isolation strategy (isolating the solar evaporator from brine), dilution strategy (diluting the concentrated brine), and crystallization strategy (regulating the crystallization site into a tiny area). Through the specific equations presented, we have identified key parameters for each strategy and highlighted the corresponding improvements in the solar desalination performance. This Review provides a semiquantitative perspective on salt-rejecting designs and critical parameters for enhancing the salt-rejecting ability of dilution-based, isolation-based, and crystallization-based solar evaporators. Ultimately, this knowledge can help us create reliable solar desalination solutions to provide clean water from even the saltiest sources.

Multifunctional Super-Hydrophilic MXene/Biomass Composite Aerogel Evaporator for Efficient Solar-Driven Desalination and Wastewater Treatment

Solar-driven interfacial evaporation is recognized as a sustainable and effective strategy for desalination to mitigate the freshwater scarcity issue. Nevertheless, the challenges of oil contamination, salt accumulation, and poor long-term stability of the solar desalination process limit its applications. Herein, a 3D biomass-based multifunctional solar aerogel evaporator is developed for water production with fabricated chitosan/lignin (CSL) aerogel as the skeleton, encapsulated with carbonized lignin (CL) particles and Ti3C2TiX (MXene) nanosheets as light-absorbing materials. Benefitting from its super-hydrophilic wettability, interconnected macropore structure, and high broadband light absorption (ca. 95.50%), the prepared CSL-C@MXene-20 mg evaporator exhibited a high and stable water evaporation flux of 2.351 kg m-2 h-1 with an energy conversion efficiency of 88.22% under 1 Sun (1 kW m-2) illumination. The CSL-C@MXene-20 mg evaporator performed excellent salt tolerance and long-term solar vapor generation in a 3.5 wt.% NaCl solution. Also, its super-hydrophilicity and oleophobicity resulted in superior salt resistance and anti-fouling performance in high salinity brine (20 wt.% NaCl) and oily wastewater. This work offers new insight into the manufacture of porous and eco-friendly biomass-based photothermal aerogels for advanced solar-powered seawater desalination and wastewater purification.

Title High Solar-Thermal Conversion Aerogel for Efficient Atmospheric Water Harvesting

The shortage of freshwater is a global problem, however, the gel that can be used for atmospheric water harvesting (AWH) in recent years studying, suffer from salt leakage, agglomeration, and slow water evaporation efficiency. Herein, a solar-driven atmospheric water harvesting (SAWH) aerogel is prepared by UV polymerization and freeze-drying technique, using poly(N-isopropylacrylamide) (PNIPAm), hydroxypropyl cellulose (HPC), ethanolamine-decorate LiCl (E-LiCl) and polyaniline (PANI) as raw materials. The PNIPAm and HPC formed aerogel networks makes the E-LiCl stably and efficiently loaded, improving the water adsorption-desorption kinetics, and PANI achieves rapid water vapor evaporation. The aerogel has low density ≈0.12-0.15 g cm-3, but can sustain a weight of 1000 times of its own weight. The synergist of elements and structure gives the aerogel has 0.46-2.95 g g-1 water uptake capability at 30-90% relative humidity, and evaporation rate reaches 1.98 kg m-2 h-1 under 1 sun illumination. In outdoor experiments, 88% of the water is harvesting under natural light irradiation, and an average water harvesting rate of 0.80 gwater gsorbent -1 day-1. Therefore, the aerogel can be used in arid and semi-arid areas to collect water for plants and animals.

Interfacial Solar Evaporation: From Fundamental Research to Applications

In the last decade, interfacial solar steam generation (ISSG), powered by natural sunlight garnered significant attention due to its great potential for low-cost and environmentally friendly clean water production in alignment with the global decarbonization efforts. This review aims to share the knowledge and engage with a broader readership about the current progress of ISSG technology and the facing challenges to promote further advancements toward practical applications. The first part of this review assesses the current strategies for enhancing the energy efficiency of ISSG systems, including optimizing light absorption, reducing energy losses, harvesting additional energy, and lowering evaporation enthalpy. Subsequently, the current challenges faced by ISSG technologies, notably salt accumulation and bio-fouling issues in practical applications, are elucidated and contemporary methods are discussed to overcome these challenges. In the end, potential applications of ISSG, ranging from initial seawater desalination and industrial wastewater purification to power generation, sterilization, soil remediation, and innovative concept of solar sea farm, are introduced, highlighting the promising potential of ISSG technology in contributing to sustainable and environmentally conscious practices. Based on the review and in-depth understanding of these aspects, the future research focuses are proposed to address potential issues in both fundamental research and practical applications.

Highly Aligned Graphene Aerogels for Multifunctional Composites

Stemming from the unique in-plane honeycomb lattice structure and the sp2 hybridized carbon atoms bonded by exceptionally strong carbon-carbon bonds, graphene exhibits remarkable anisotropic electrical, mechanical, and thermal properties. To maximize the utilization of graphene's in-plane properties, pre-constructed and aligned structures, such as oriented aerogels, films, and fibers, have been designed. The unique combination of aligned structure, high surface area, excellent electrical conductivity, mechanical stability, thermal conductivity, and porous nature of highly aligned graphene aerogels allows for tailored and enhanced performance in specific directions, enabling advancements in diverse fields. This review provides a comprehensive overview of recent advances in highly aligned graphene aerogels and their composites. It highlights the fabrication methods of aligned graphene aerogels and the optimization of alignment which can be estimated both qualitatively and quantitatively. The oriented scaffolds endow graphene aerogels and their composites with anisotropic properties, showing enhanced electrical, mechanical, and thermal properties along the alignment at the sacrifice of the perpendicular direction. This review showcases remarkable properties and applications of aligned graphene aerogels and their composites, such as their suitability for electronics, environmental applications, thermal management, and energy storage. Challenges and potential opportunities are proposed to offer new insights into prospects of this material.

Boosting the Viable Water Harvesting in Solar Vapor Generation: From Interfacial Engineering to Devices Design

Continuously increasing demand for the life-critical water resource induces severe global water shortages. It is imperative to advance effective, economic, and environmentally sustainable strategies to augment clean water supply. The present work reviews recent reports on the interfacial engineering to devices design of solar vapor generation (SVG) system for boosting the viability of drinkable water harvesting. Particular emphasis is placed on the basic principles associated with the interfacial engineering of solar evaporators capable of efficient solar-to-thermal conversion and resulting freshwater vapor via eliminating pollutants from quality-impaired water sources. The critical configurations manufacturing of the devices for fast condensation is then highlighted to harvest potable liquid water. Fundamental and practical challenges, along with prospects for the targeted materials architecture and devices modifications of SVG system are also outlined, aiming to provide future directions and inspiring critical research efforts in this emerging and exciting field.

Carbonaceous Materials-Based Photothermal Process in Water Treatment: From Originals to Frontier Applications

The photothermal process has attracted considerable attention in water treatment due to its advantages of low energy consumption and high efficiency. In this respect, photothermal materials play a crucial role in the photothermal process. Particularly, carbonaceous materials have emerged as promising candidates for this process because of exceptional photothermal performance. While previous research on carbonaceous materials has primarily focused on photothermal evaporation and sterilization, there is now a growing interest in exploring the potential of photothermal effect-assisted advanced oxidation processes (AOPs). However, the underlying mechanism of the photothermal effect assisted by carbonaceous materials remains unclear. This review aims to provide a comprehensive review of the photothermal process of carbonaceous materials in water treatment. It begins by introducing the photothermal properties of carbonaceous materials, followed by a discussion on strategies for enhancing these properties. Then, the application of carbonaceous materials-based photothermal process for water treatment is summarized. This includes both direct photothermal processes such as photothermal evaporation and sterilization, as well as indirect photothermal processes that assisted AOPs. Meanwhile, various mechanisms assisted by the photothermal effect are summarized. Finally, the challenges and opportunities of using carbonaceous materials-based photothermal processes for water treatment are proposed.

Highly efficient MoS2/MXene aerogel for interfacial solar steam generation and wastewater treatment

Interfacial solar steam generation using aerogels holds great promise for seawater desalination and wastewater treatment. However, to achieve aerogels with both durable, high-efficiency evaporation performance and excellent salt resistance remains challenging. Here, a molybdenum disulphide (MoS2) and MXene composite aerogel with vertical pore channels is reported, which has outstanding advantages in mechanical properties, water transportation, photothermal conversion, and recycling stability. Benefiting from the plasmon resonance effect of MXene and the excellent photothermal conversion performance of MoS2, the aerogel exhibits excellent light absorption (96.58 %). The aerogel is resistant to deformation and able to rebound after water absorption, because of the support of an ordered vertical structure. Moreover, combined with the low water evaporation enthalpy, low thermal conductivity, and super hydrophilicity, the aerogel achieves an efficient and stable evaporation rate of about 2.75 kg m-2h-1 under one sun and exhibits excellent self-cleaning ability. Notably, the evaporator achieves removal rates of 99.9 % for heavy metal ions and 100 % for organic dyes, which has great potential in applications including seawater desalination and wastewater purification.

One-step fabrication of all-in-one three-dimensional porous polypyrrole/polydopamine structure for efficient solar vapor generation

High-quality solar evaporators with all-in-one design are highly desirable for vapor generation, but relevant research is scarce. In this study, a three-dimensional (3D) porous polypyrrole/polydopamine (PPY/PDA) structure was fabricated via a simple heating-assisted rapid oxidative polymerization method. The obtained evaporator has multiple features, and can simultaneously provide rapid water transport channels (average pore sizes ∼ 18.37 nm), low thermal conductivity (0.071 W m-1 K-1), high solar absorbance (97.08%), and good mechanical properties. When it is employed as an evaporator, the calculated water evaporation rate is approximately 2.12 kg m-2h-1, which is comparable to other reported 3D evaporators. Additionally, the evaporator displays great potential for purification toward various nonpotable water, as well as reliable pure water yields in an outdoor application (from 8:00 am to 5:00 pm, the evaporator can produce at least 13.95 L of drinkable water for a 1 m2 sample). We believe that the proposed strategy to fabricate all-in-one evaporators has great significance for scientific research and practical applications.

Pickering Emulsion Templated 3D Cylindrical Open Porous Aerogel for Highly Efficient Solar Steam Generation

Porous-structured evaporators have been fabricated for achieving a high clean water throughput due to their maximized surface area. However, most of the evaporation surfaces in the porous structure are not active because of the trapped vapor in pores. Herein, a three-dimensional (3D) cylindrical aerogel-based photothermal evaporator with a disordered interconnected hierarchical porous structure is developed via a Pickering emulsion-involved polymerization method. The obtained cotton cellulose/aramid nanofibers/polypyrrole (CAP) aerogel-based evaporator achieved all-cold evaporation under 1.0 sun irradiation, which not only completely eliminated energy loss via radiation, convection, and conduction, but also harvested massive extra energy from the surrounding environment and bulk water, thus significantly increasing the total energy input for vapor generation to deliver an extremely high evaporation rate of 5.368 kg m-2 h-1 . In addition, with the external convective flow, solar steam generation over the evaporator can be dramatically enhanced due to fast vapor diffusion out of its unique opened porous structure, realizing an ultrahigh evaporation rate of 18.539 kg m-2 h-1 under 1.0 sun and 4.0 m s-1 . Moreover, this evaporator can continuously operate with concentrated salt solution (20 wt.% NaCl). This work advances rational design and construction of solar evaporator to promote the application of solar evaporation technology in freshwater production.

Creating Biomimetic Central-Radial Skeletons with Efficient Mass Adsorption and Transport

Porous skeletons play a crucial role in various applications. Their fundamental significance stems from their remarkable surface area and capacity to enhance mass adsorption and transport. Freeze-casting is a commonly utilized methodology for the production of porous skeletons featuring vertically aligned channels. Nevertheless, the resultant single-oriented skeleton displays anisotropic mass transfer characteristics and suboptimal mechanical properties. Our investigation was motivated by the intricate microstructures observed in botanical organisms, leading us to devise an advanced freeze-casting methodology. A novel central-radial skeleton with significantly enhanced capabilities has been successfully engineered. The central-radial architecture demonstrates superior refinement and uniformity in its pore structure, featuring an axial mass transfer axis and meticulously arranged radial channels. This microstructure endows the porous skeleton with a higher compression resilience, superior adsorption rate, and structural maintenance capacity. Through a rigorous examination of the thermal conductivity of skeleton-filled composites coupled with comprehensive COMSOL simulations, the exceptional characteristics of this unique structural arrangement have been definitively ascertained. Furthermore, the efficacy of implementing this skeleton in chip cooling and photothermal conversion has been convincingly substantiated. Our pioneering method of microstructure preparation, employing freeze-casting, holds immense potential in expanding its applicability and inspiring innovative concepts for the advancement of novel structures.

Lamellar Wood Sponge with Vertically Aligned Channels for Highly Efficient and Salt-Resistant Solar Desalination

Solar-assisted interfacial evaporation is a promising approach for purifying and desalinating water. As a sustainable biomass material, wood has attracted increasing interest as an innovative substrate for solar desalination, owing to its intrinsic porous structure, high hydrophilicity, and low thermal conductivity. However, developing wood-based solar evaporators with high evaporation rates and excellent salt resistance still remains a significant challenge, owing to the absence of large pores with high interconnectivity in natural wood. Herein, by converting the honeycombed structure of natural wood into a lamellar architecture via structural engineering, we develop a flexible wood sponge with vertically aligned channels for efficient and salt-resistant solar desalination after surface coating with carbon nanotubes (CNTs). The special lamellar structure with an interlayer distance of 50-300 μm provides the wood sponge with faster water transport, lower thermal conductivity, and water evaporation enthalpy, thus achieving higher evaporation performances in comparison with the cellular structure of natural wood. Noteworthy, the vertically aligned channels of the wood sponge facilitate sufficient fluid convection and diffusion and enable efficient salt exchanges between the heating interface and the underlying bulk water, thus preventing salt accumulation on the surface. Benefiting from the distinctive lamellar structure, the developed wood-sponge evaporator exhibits exceptional salt resistance even in a hypersaline brine (20 wt %) during continuous 7-day desalination under 1 sun irradiation, with a high evaporation rate (1.38-1.43 kg m-2 h-1), outperforming most previously reported wood-based evaporators. The lamellar wood sponge may provide a promising strategy for desalinating high-salinity brines in an efficient manner.

Scalable, Green, and Cost-Effective Carbonized Sand for Efficient Solar Desalination

Nowadays, sweet and drinkable water shortage is a global issue which has attracted widespread attention. Desalination of seawater as the greatest source of water on our planet using solar energy as the most abundant and green energy source for producing fresh water can help us address this issue. Interfacial solar desalination is a state-of-the-art, sustainable, green, and energy-efficient method that has been studied lately. One of the key parameters for researching this method with reasonable efficiency is a photothermal material. Herein, carbon-coated sand was synthesized using abundant, green, and low-cost materials (sand and sugar), and its performance as a photothermal material is investigated and reported. In this work, a three-dimensional (3D) system is introduced to develop the performance and efficiency of the system under real sun irradiation and natural circumstances. The salt rejection ability of the system is another important thing we should notice due to the high salinity of seawater that we want to desalinate. The superhydrophilic carbonized sand demonstrated a good evaporation rate of 1.53 kg/m²h and 82% efficiency under 1 sun irradiation and upright salt rejection ability, which exhibited its capability to be used in green solar-driven water vaporization technology for sweet water production. The effects of important parameters, including light intensity, wind speed, and environment temperature, on the evaporation rate using carbonized sand as a solar collector in a solar desalination system were studied in both laboratory and real systems.

Bioinspired Self-Standing, Self-Floating 3D Solar Evaporators Breaking the Trade-Off between Salt Cycle and Heat Localization for Continuous Seawater Desalination

Facing the global water shortage challenge, solar-driven desalination is considered a sustainable technology to obtain freshwater from seawater. However, the trade-off between the salt cycle and heat localization of existing solar evaporators (SE) hinders its further practical applications. Here, inspired by water hyacinth, a self-standing and self-floating 3D SE with adiabatic foam particles and aligned water channels is built through a continuous directional freeze-casting technique. With the help of the heat insulation effect of foam particles and the efficient water transport of aligned water channels, this new SE can cut off the heat transfer from the top photothermal area to the bulk water without affecting the water supply, breaking the long-standing trade-off between salt cycle and heat localization of traditional SEs. Additionally, its self-standing and self-floating features can reduce human maintenance. Its large exposure height can increase evaporation area and collect environmental energy, breaking the long-standing limitation of solar-to-vapor efficiency of conventional SEs. With the novel structure employed, an evaporation flux of 2.25 kg m^-2 h^-1 , and apparent solar-to-vapor efficiency of 136.7% are achieved under 1 sun illumination. This work demonstrates a new evaporator structure, and also provides a key insight into the structural design of next-generation salt-tolerant and high-efficiency SEs.

Eco-friendly photothermal hydrogel evaporator for efficient solar-driven water purification

The field of solar vapor generation has developed rapidly in recent years, but achieving the goals of a high evaporation rate, eco-friendliness and rapid preparation with low-cost raw materials is still a challenge. In this work, a type of photothermal hydrogel evaporator was prepared by blending eco-friendly poly(vinyl alcohol), agarose, Fe³⁺ and tannic acid (TA) together, in which the tannic acid-ferric ion (TA*Fe³⁺) complexes served as photothermal materials and effective gelators. The results indicate that the TA*Fe³⁺ complex exhibits excellent gelatinization ability and light-absorption performance, which leads to a compressive stress of 0.98 MPa at 80% strain and up to 85% light absorption ratio in the photothermal hydrogel. For interfacial evaporation, a high rate of 1.897 ± 0.11 kg·m^-2·h^-1 corresponding to an energy efficiency of 89.7 ± 2.73% under 1 sun irradiation is achieved. Moreover, the hydrogel evaporator exhibits high stability in a 12-hour test and a 20-cycle test without a decline in evaporation performance. The outdoor testing results show that the hydrogel evaporator can achieve an evaporation rate of > 0.70 kg/m² and effectively purify wastewater treatment and seawater desalination.

Designing a solar interfacial evaporator based on tree structures for great coordination of water transport and salt rejection

Solar interfacial evaporation has been receiving increasing attention but it is still a huge challenge to achieve excellent coordination between efficient water transport and salt rejection. Here, unlike the common wood-inspired evaporators with equal-diameter directional pores, we have constructed an integrated structure with highly connected gradient pores that mimic the xylem vessels and phloem sieve tubes found in trees. The bio-inspired structure can reduce the resistance of water transport and salt rejection in the same channel. The average transport speed of the 6.5 cm high (2 cm in diameter) porous structure reached 1.504 g s^-1, and water was transported 16 cm after 100 seconds. Using multilayer graphene oxide as the photothermal conversion material, the evaporators with different heights can work for more than 9 hours under the condition of 1 sun illumination and 23 wt% brine without any salt crystallization, and the evaporation rates range from 3.28 to 4.51 kg m^-2 h^-1, with the highest energy utilization efficiency of about 80%. When used in heavy metal treatment, the rejection was greater than 99.99%. This research provides a simple but innovative design idea for evaporators and is expected to further expand the application of solar interfacial evaporation.

Locking Patterned Carbon Nanotube Cages by Nanofibrous Mats to Construct Cucurbituril[n]-Based Ultrapermselective Dye/Salt Separation Membranes

Surface patterning is a promising strategy to overcome the trade-off effect of separation membranes. Herein, a bottom-up patterning strategy of locking micron-sized carbon nanotube cages (CNCs) onto a nanofibrous substrate is developed. The strongly enhanced capillary force triggered by the abundant narrow channels in CNCs endows the precisely patterned substrate with excellent wettability and antigravity water transport. Both are crucial for the preloading of cucurbit[n]uril (CB6)-embeded amine solution to form an ultrathin (∼20 nm) polyamide selective layer clinging to CNCs-patterned substrate. The CNCs-patterning and CB6 modification result in a 40.2% increased transmission area, a reduced thickness, and a lowered cross-linking degree of selective layer, leading to a high water permeability of 124.9 L·m^-2 h^-1 bar^-1 and a rejection of 99.9% for Janus Green B (511.07 Da), an order of magnitude higher than that of commercial membranes. The new patterning strategy provides technical and theoretical guidance for designing next-generation dye/salt separation membranes.

A Magneto-Heated Silk Fibroin Scaffold for Anti-Biofouling Solar Steam Generation

Macroscopic 3D porous materials are ideal solar evaporators for water purification. However, the limited sunlight intensity and penetrating depth during solar-driven evaporation cannot prevent the biofouling formation by photothermal effect, thus leading to the deterioration of evaporation rate. Herein, a magnetic heating strategy is reported for anti-biofouling solar steam generation based on a magnetic silk fibroin (SF) scaffold with bi-heating property. Under one sun, the solar-heated top surface of magnetic SF scaffolds accelerates water evaporation at 2.03 kg m^-2 h^-1 , while the unheated inner channels suffer from the formation of biofilm. When exposed to alternating magnetic field (AMF), the magnetic SF scaffold can be integrally heated, leading to an efficient inner temperature to prevent biofouling in channels for water transportation. Accordingly, magneto-heated scaffolds show steady water evaporation rates after exposure to S. aureus and E. coli, which maintained 93.6-94.6% of original performance. In contrast, the evaporation rates of the scaffolds without AMF treatment are reduced to 1.31 (S. aureus) and 1.32 (E. coli) kg m^-2 h^-1 , decreased by 35.5% and 35.0%, respectively. In addition, the magneto-heated scaffold inhibits biofouling formation in natural lake water, maintaining 99.5% original performance.

Moisture wicking textiles with hydrophilic oriented polyacrylonitrile layer: Enabling ultrafast directional water transport

Functional textiles with high-performance directional water transport for regulating human sweat are in high demand because of growing concerns about the role of comfort in the performance of wearer. However, the fabrication of such materials remains a critical job. Here, we report a facile strategy to develop hydrophilic oriented polyacrylonitrile (HOPAN)/hydrophilic polylactic acid @polyvinylidene fluoride (HPLA@PVDF) composite membrane with surface energy gradient for enhanced directional water transport. Three step fabrication strategy involves electrospinning of oriented polyacrylonitrile (OPAN fibers) on polylactic acid (PLA) nonwoven surface followed by dip-coating in hydrophilic agent, and single-side electrospray of PVDF dilute solution on HOPAN/HPLA. Combination of highly oriented fiber structure, differential pore size and asymmetric wettability between two layers enabled instant water transport. The resultant fabricated composite membranes offer superior properties with one-way transport capacity (R) of 1117%, overall moisture management capacity (OMMC) of 0.91, and excellent water vapor transmission rate of 11.6 kg m^-2 d^-1. The successful preparation of these fascinating directional water transport materials offers new insight into the role of fiber alignment along with differential apertures and asymmetric chemical structure for realizing membranes for quick-drying applications.

Engineering Structural Janus MXene-nanofibrils Aerogels for Season-Adaptive Radiative Thermal Regulation

Aerogels have provided a significant platform for passive radiation-enabled thermal regulation, arousing extensive interest due to their capabilities of radiative cooling or heating. However, there still remains challenge of developing functionally integrated aerogels for sustainable thermal regulation in both hot and cold environment. Here, Janus structured MXene-nanofibrils aerogel (JMNA) is rationally designed via a facile and efficient way. The achieved aerogel presents the characteristic of high porosity (≈98.2%), good mechanical strength (tensile stress of ≈2 MPa, compressive stress of ≈115 kPa), and macroscopic shaping property. Based on the asymmetric structure, the JMNA with switchable functional layers can alternatively enable passive radiative heating and cooling in winter and summer, respectively. As a proof of concept, JMNA can function as a switchable thermal-regulated roof to effectively enable the inner house model to maintain >25 °C in winter and <30 °C in hot summer. This design of Janus structured aerogels with compatible and expandable capabilities is promising to widely benefit the low-energy thermal regulation in changeable climate.

Efficient Fabrication of Micro/Nanostructured Polyethylene/Carbon Nanotubes Foam with Robust Superhydrophobicity, Excellent Photothermality, and Sufficient Adaptability for All-Weather Freshwater Harvesting

The integration of fog collection and solar-driven evaporation has great significance in addressing the challenge of the global freshwater crisis. Herein, a micro/nanostructured polyethylene/carbon nanotubes foam with interconnected open-cell structure (MN-PCG) is fabricated using an industrialized micro extrusion compression molding technology. The 3D surface micro/nanostructure provides sufficient nucleation points for tiny water droplets to harvest moisture from humid air and a fog harvesting efficiency of 1451 mg cm^-2 h^-1 is achieved at night. The homogeneously dispersed carbon nanotubes and the graphite oxide@carbon nanotubes coating endow the MN-PCG foam with excellent photothermal properties. Benefitting from the excellent photothermal property and sufficient steam escape channels, the MN-PCG foam attains a superior evaporation rate of 2.42 kg m^-2 h^-1 under 1 Sun illumination. Consequently, a daily yield of ≈35 kg m^-2 is realized by the integration of fog collection and solar-driven evaporation. Moreover, the robust superhydrophobicity, acid/alkali tolerance, thermal resistance, and passive/active de-icing properties provide a guarantee for the long-term work of the MN-PCG foam during practical outdoor applications. The large-scale fabrication method for an all-weather freshwater harvester offers an excellent solution to address the global water scarcity.

Euryale ferox stem-inspired anisotropic quaternized cellulose/xanthan-based antibacterial sponge with high absorbency and compressibility for noncompressible hemorrhage

Uncontrollable hemorrhage from deep noncompressible wounds remains an intractable challenge. Herein, inspired by the euryale ferox stem which is capable of transporting water and nutrient substances efficiently along longitudinally aligned channels, an anisotropic sponge with rapidly liquid absorption capacity, excellent mechanical compressibility and antibacterial property based on quaternized cellulose (QC), xanthan gum (XG) and reduced graphene oxide (rGO), was constructed. The euryale ferox stem-like structure and multiple interactions, involving hydrogen bonding, electrostatic interaction and chemical crosslinking, endowed the sponge with excellent fatigue resistance, elasticity and efficient liquid absorption capacity. In vivo rat liver injury, tail amputation and liver noncompressible hemorrhage model experiments confirmed that the sponge exhibited superior hemostatic performance than commercial gelatin sponge, attributing to the positive charge, efficient absorption capacity and rough surface of the sponge, which synergistically promoting the aggregation and activation of red blood cells and platelets as well as formation of fibrin network, leading to accelerated blood coagulation process. Besides, the sponge showed favorable cytocompatibility, hemocompatibility and antibacterial property. Overall, the bioinspired sponge had fantastic potential for controlling deep noncompressible hemorrhage and providing a new idea for designing hemostatic materials.

Fibrous Aerogels with Tunable Superwettability for High-Performance Solar-Driven Interfacial Evaporation

Solar-driven interfacial evaporation is an emerging technology for water desalination. Generally, double-layered structure with separate surface wettability properties is usually employed for evaporator construction. However, creating materials with tunable properties is a great challenge because the wettability of existing materials is usually monotonous. Herein, we report vinyltrimethoxysilane as a single molecular unit to hybrid with bacterial cellulose (BC) fibrous network, which can be built into robust aerogel with entirely distinct wettability through controlling assembly pathways. Siloxane groups or carbon atoms are exposed on the surface of BC nanofibers, resulting in either superhydrophilic or superhydrophobic aerogels. With this special property, single component-modified aerogels could be integrated into a double-layered evaporator for water desalination. Under 1 sun, our evaporator achieves high water evaporation rates of 1.91 and 4.20 kg m-2 h-1 under laboratory and outdoor solar conditions, respectively. Moreover, this aerogel evaporator shows unprecedented lightweight, structural robustness, long-term stability under extreme conditions, and excellent salt-resistance, highlighting the advantages in synthesis of aerogel materials from the single molecular unit.

Radial Sponges Facilitate Wound Healing by Promoting Cell Migration and Angiogenesis

The topographic cues of wound dressings play important roles in regulating cellular behaviors, such as cellular migration and morphology, and are capable of providing a prolonged stimulus for promoting wound healing. However, 3D porous dressings that can guide wound healing from the periphery to the center are poorly studied. Herein, radial sponges with adjustable lamellar spacing and microridge spacing by ice templating are developed to facilitate wound healing. With denser lamellae and microridges, fibroblasts achieve a more orderly arrangement, a larger elongation, and a greater migration rate. Meanwhile, the elongated state enables human umbilical vein endothelial cells to vascularization. The faster healing rate and a higher degree of vascularization based on radial sponges are further demonstrated in full-thickness skin defects in rats. Taken together, radial sponges with the densest lamellae and microridges perform the best in guiding the wound from the periphery to the center of the repair environment. It is believed that the proposed structure here can be combined with various biochemical factors to provide dressings with functions.

Microgels based on 0D-3D carbon materials: Synthetic techniques, properties, applications, and challenges

Microgels are three-dimensional (3D) colloidal hydrogel particles with outstanding features such as biocompatibility, good mechanical properties, tunable sizes from submicrometer to tens of nanometers, and large surface areas. Because of these unique qualities, microgels have been widely used in various applications. Carbon-based materials (CMs) with various dimensions (0-3D) have recently been investigated as promising candidates for the design and fabrication of microgels because of their large surface area, excellent conductivity, unique chemical stability, and low cost. Here, we provide a critical review of the specific characteristics of CMs that are being incorporated into microgels, as well as the state-of-the art applications of CM-microgels in pollutant adsorption and photodegradation, H₂ evoluation, CO₂ capture, soil conditioners, water retention, drug delivery, cell encapsulation, and tissue engineering. Advanced preparation techniques for CM-microgel systems are also summarized and discussed. Finally, challenges related to the low colloidal stability of CM-microgels and development strategies are examined. This review shows that CM-microgels have the potential to be widely used in various practical applications.

Bilayer Designed Paper-Based Solar Evaporator for Efficient Seawater Desalination

Solar desalination devices utilizing sustainable solar energy and the abundant resource of seawater has great potential as a response to global freshwater scarcity. Herein, a bilayered solar evaporator was designed and fabricated utilizing a facile paper sheet forming technology, which was composed of cellulose fibers decorated with Fe₃O₄ nanoparticles as the top absorbent layer and the original cellulose fibers as the bottom supporting substrate. The characterization of the cellulose fibers decorated with Fe₃O₄ nanoparticles revealed that the in situ formed Fe₃O₄ nanoparticles were successfully loaded on the fiber surface and presented a unique rough surface, endowing the absorber layer with highly efficient light absorption and photothermal conversion. Moreover, due to its superhydrophilic property, the cellulose fiber-based bottom substrate conferred ultra-speed water transport capability, which could enable an adequate water supply to combat the water loss caused by continuous evaporation on the top layer. With the advantages mentioned above, our designed bilayered paper-based evaporator achieved an evaporation rate ~1.22 kg m^-2 h^-1 within 10 min under 1 sun irradiation, which was much higher than that of original cellulose cardboard. Based on the simple and scalable manufacture process, the bilayered paper-based evaporator may have great potential as a highly efficient photothermal conversion material for real-world desalination applications.

Tailoring centripetal metamaterial with superelasticity and negative Poisson's ratio for organic solvents adsorption

Graphene metamaterials with a radial-like structure and negative Poisson's ratio (NPR) were assembled using a unique centripetal freezing technique. Driven by the centripetal temperature gradient, ice crystals were grown toward the center of an aqueous graphene dispersion and form a radially arranged skeleton. A reentrant structure was formed at the diagonal of the monolith as the ice crystals sublimate. The obtained centripetal graphene metamaterial (CGM) was endowed with NPR response. CGM maintained NPR under 50% compression, which reached a minimum (-0.18) at 10% strain. After 50 compressive cycles at 50% strain, CGM retained approximately 96% of the original compressive strength. The radial channels endowed CGM with fast absorption kinetics, and the NPR response effectively accommodated the damage caused by volume shrinkage during repeated adsorption-regeneration cycles. This strategy is an effective method for achieving NPR response and improving the mechanical properties of porous materials.

A water supply tunable bilayer evaporator for high-quality solar vapor generation

Interfacial heating is the most obvious feature that distinguishes the novel solar driven interfacial heating from the traditional solar heating technology, and it is also a key factor in promoting solar energy utilization and vapor generation performance. However, the inherent trade-off between water supply and the interfacial heating performance of photothermal materials has rarely been investigated. Herein, an all-in-one designed bilayer evaporator consisting of a top solar absorber (Fe₃O₄@PDA-SA) and a bottom water transport layer (SA) is reported. This bilayer structured aerogel can provide good thermal insulation, effective water transmission channels, and reliable light absorbance, and perform well as a high-quality solar steam evaporator with the evaporation rate of approximately 1.517 kg m^-2 h^-1 and the evaporation efficiency of approximately 98.27% under 1 kW m^-2 solar illumination. Most importantly, we can control the pore size of the bottom layer by a simple free water evaporation method, so as to manipulate the water transport capacity of materials. There is flexibility to change the water content of the light-absorbing structure and further explore the influence of water supply on the interfacial heating performance of the evaporator, which provides more possibilities for the design and preparation of high-quality solar steam evaporators.

Metal-Organic Framework Composite Photothermal Membrane for Removal of High-Concentration Volatile Organic Compounds from Water via Molecular Sieving

Water-soluble volatile organic compounds (VOCs) are among the most difficult-to-treat species during wastewater treatment. The current purification and removal of high-concentration VOCs still rely on the energy-consuming distillation and high-pressure driven reverse osmosis technology. There is an urgent need for an advanced technology that can effectively remove high-concentration VOCs from water. Here, we report a metal-organic framework (MOF)/polyaniline (PANI) nanofiber array composite photothermal membrane for removal of high-concentration VOCs from water via molecular sieving during a solar-driven evaporation process. The modified zeolitic imidazole framework-8 (ZIF-8) layer grown on a PANI nanofiber array acts as a molecular sieving layer to evaporate water but intercept VOCs. The composite membrane exhibits high VOCs rejection and a high-water evaporation rate for water containing different concentrations of VOCs. When treating water containing VOCs with a concentration of up to 400 mg L^-1, the VOCs rejection rate is up to 99% and the water evaporation rate is 1.0 kg m^-2 h^-1 under 1 sun irradiation (1 kW m^-2). Our work effectively combines the molecular sieve effect with a solar-driven evaporation process, which provides an effective strategy for the treatment of water containing VOCs.

Over 11 kg m-2 h-1 Evaporation Rate Achieved by Cooling Metal-Organic Framework Foam with Pine Needle-Like Hierarchical Structures to Subambient Temperature

Solar steam generation has become a hot research topic because of its great potential to alleviate the drinking water crisis without extra energy input. Although some efforts focusing on designing spatial geometry have been made to multiply the evaporation performances of up-to-date three-dimensional evaporators, they still have some shortcomings, such as low material and space utilization efficiencies, complex spatial geometry, energy loss due to the hot solar absorption surface, and salt crystallization due to inefficient water supply. Herein, a biomimetic copper-based metal-organic framework (Cu-Cu(OH)₂-MOF) foam sheet with interconnected pores and pine needle-like hierarchical structures consisting of Cu(OH)₂ nanowires and MOF nanowhiskers is fabricated. The pine needle-like hierarchical structures of Cu-Cu(OH)₂-MOF foam contribute to absorbing solar energy and supplying sufficient water by trapping incident light and enhancing the capillary force, respectively. Inspired by drying clothes outside under solar irradiation, through exposing one end of the Cu-Cu(OH)₂-MOF foam to air, the biface evaporator achieves a subambient evaporation surface temperature and an evaporation rate of up to 3.27 kg m^-2 h^-1 under only one sun illumination. Furthermore, when coupled with an air flow, the biface evaporator realizes an excellent evaporation rate of 11.58 kg m^-2 h^-1 with an energy efficiency of 160.07% even in seawater, ensuring its great application prospect to be used in drinking water production and seawater desalination.

Tailoring the Salt Transport Flux of Solar Evaporators for a Highly Effective Salt-Resistant Desalination with High Productivity

Developing highly effective salt-resistant solar evaporators for a long-term desalination with a high evaporation rate and water production rate remains a great challenge. Herein, we fabricated a three-dimensional printed hierarchical porous reduced graphene oxide/carbon black (3DP-HP rGO/CB) solar evaporator constructed with a thin layer of porous photothermal interface and a grid of hierarchical porous transport channel possessing a large-sized porous microstructure. The 3DP-HP rGO/CB solar evaporator demonstrates a tailored high-salt transport flux of up to 4.3 kg·m^-2·h^-1, which displays a highly effective salt-resistant performance at a high evaporation rate of 10.5 kg·m^-2·h^-1 during a desalination of 10 wt % NaCl brine under 8 kW·m^-2 illumination. Experiments and theoretical calculations prove that the large porous microstructure with abundant and low-resistance salt ion channels endows solar evaporators with a high salt transport flux, therefore boosting salt resistance compared to traditional solar evaporators. A 10 d desalination experiment shows the long-term salt resistance of a 3DP-HP rGO/CB solar evaporator for a high-rate and stable evaporation and water production. Furthermore, the 3DP-HP rGO/CB evaporator can purify 10 wt % NaCl brine at an ultrafast water production rate of up to 5.6 L·m^-2·h^-1 under natural sunlight. This work demonstrates great potential for the practical implementation of solar desalination with high productivity.

Fibrous Aerogels for Solar Vapor Generation

Solar-driven vapor generation is emerging as an eco-friendly and cost-effective water treatment technology for harvesting solar energy. Aerogels are solid materials with desirable high-performance properties, including low density, low thermal conductivity, and high porosity with a large internal surface, which exhibit outstanding performance in the area of solar vapor generation. Using fibers as building blocks in aerogels could achieve unexpected performance in solar vapor generation due to their entangled fibrous network and high surface area. In this review, based on the fusion of the one-dimensional fibers and three-dimensional porous aerogels, we discuss recent development in fibrous aerogels for solar vapor generation based on building blocks synthesis, photothermal materials selection, pore structures construction and device design. Thermal management and water management of fibrous aerogels are also evaluated to improve evaporation performance. Focusing on materials science and engineering, we overview the key challenges and future research opportunities of fibrous aerogels in both fundamental research and practical application of solar vapor generation technology.

Magnetically Driven Tunable 3D Structured Fe3 O4 Vertical Array for High-Performance Solar Steam Generation

Structural design of the solar-absorbing layer has been considered as one of the most direct and effective approaches for improving the solar steam generation performance by maximizing the absorption of sunlight, but great challenges in manipulation simplification and structure controllability still remain. Herein, a polyester (PET) fabric covered with a vertically aligned 3D tower-like ferrosoferric oxide (Fe₃ O₄ ) array via a convenient magnetically driven spray-coating method is reported, and both the spatial density and height of the Fe₃ O₄ array are tunable upon spraying time. It shows an extremely high solar absorbance (98.6%) in the entire solar spectrum, which is superior to the corresponding 2D Fe₃ O₄ structure (91.1%). Combining the obtained 3D Fe₃ O₄ /PET with a yolk-shell hydrophobic/superhydrophilic modified melamine-formaldehyde (mMF) sponge, the carefully designed and fabricated 3D Fe₃ O₄ /PET-mMF evaporator can realize a high water evaporation rate of 1.59 kg m^-2 h^-1 under 1 kW m^-2 solar illumination, outperforming most related solar steam generation systems. With the advantages of cost-effectiveness, high evaporation rate, reliable endurance, and structural controllability, this 3D structural design provides an avenue to build up high-performance solar energy-driven water steam generation systems.

Liquid Transport and Real-Time Dye Purification via Lotus Petiole-Inspired Long-Range-Ordered Anisotropic Cellulose Nanofibril Aerogels

Nowadays, large-scale oriented functional porous materials have been sought after by researchers. However, regulation of the long-range uniform and oriented structures of the material remains a challenge. Herein, ultralong anisotropic cellulose nanofibril (CNF) aerogels with uniformly ordered structures of pore walls inspired by lotus petioles were constructed by applying external speeds to counterbalance the growth driving forces of ice crystals. Based on the growth law of ice crystals, the ice crystals grew at a stable rate when the applied external speed was 0.04 mm/s, ensuring the consistent orientation of the large-scale CNF aerogel. The aerogel exhibited a rapid long-range directional transport ability to different liquid solvents, delivering ethanol up to 40 mm from bottom to top within 50 s. Moreover, by introducing rectorites with good cation-exchange properties, the resulting long-range composite possessed an enhanced adsorption capacity for methylene blue. Furthermore, aerogel successfully achieved real-time dye purification at a long distance, such as fast dye adsorption or selective adsorption. This flexible and straightforward strategy of fabricating ultralong oriented CNF aerogel materials is expected to promote the development of functional aerogels in directional liquid transport and sewage treatment.

Bioinspired Redwood-Like Scaffolds Coordinated by In Situ-Generated Silica-Containing Hybrid Nanocoatings Promote Angiogenesis and Osteogenesis both In Vitro and In Vivo

Inspired by natural redwood and bone, a biomimetic strategy is presented to develop a highly bioactive redwood-like nanocomposite via radial freeze casting of biocompatible hydrogels followed by the in situ coprecipitation of a Si-containing CaP hybrid nanocoating (SCPN). The engineered material displays radially aligned macrochannels and a porous network structure similar to those of natural redwood. In addition to acting as a mechanical reinforcement, introducing SCPNs into the weak redwood-like scaffold yields not only a nanoroughened surface topography, a low swelling ratio, retarded enzymatic degradation, and enhanced protein absorption abilities but also the sustained sequential release of Si and Ca ions, thereby providing essential biophysical and biochemical cues for effective bone regeneration. Benefiting from the redwood-like structures and bioactive SCPNs, the biomimetic materials create a favorable microenvironment for promoting the initial adhesion, spreading, proliferation, and migration of bone marrow-derived mesenchymal stem cells and human umbilical vein endothelial cells. Furthermore, the in vitro and in vivo data showed that the biocompatible redwood-like scaffold with precipitated SCPN can synergistically promote osteogenesis and angiogenesis in their aligned direction. Collectively, this work presents a novel bioinspired redwood-like material with multifunctional properties that provides new insight into bone defect repair.

Controlled Vertically Aligned Structures in Polymer Composites: Natural Inspiration, Structural Processing, and Functional Application

Vertically aligned structures, which are a series of characteristic conformations with thickness-direction alignment, interconnection, or assembly of filler in polymeric composite materials that can provide remarkable structural performance and advanced anisotropic functions, have attracted considerable attention in recent years. The past two decades have witnessed extensive development with regard to universal fabrication methods, subtle control of morphological features, improvement of functional properties, and superior applications of vertically aligned structures in various fields. However, a systematic review remains to be attempted. The various configurations of vertical structures inspired from biological samples in nature, such as vertically aligned structures with honeycomb, reed, annual ring, radial, and lamellar configurations are summarized here. Additionally, relevant processing methods, which include the transformation of oriented direction, external-field inducement, template method, and 3D printing method, are discussed in detail. The diverse applications in mechanical, thermal, electric, dielectric, electromagnetic, water treatment, and energy fields are also highlighted by providing representative examples. Finally, future opportunities and prospects are listed to identify current issues and potential research directions. It is expected that perspectives on the vertically aligned structures presented here will contribute to the research on advanced multifunctional composites.