Tunable Synthesis of Hollow Metal-Nitrogen-Carbon Capsules for Efficient Oxygen Reduction Catalysis in Proton Exchange Membrane Fuel Cells

Challenges and Opportunities of Uranium Extraction From Seawater: a Systematic Roadmap From Laboratory to Industry

Uranium extraction from seawater (UES) is crucial for ensuring the sustainable development of nuclear power and has seen significant advancements in recent years. However, natural seawater is a highly complex biogeochemical system, characterized by an extremely low uranium (U) concentration (≈3.3 µg L-1), abundant competitive ions, and significant marine biological pollution, making UES a formidable challenge. This review addresses the challenges encountered in UES and explores potential methods for enhancing the industrial UES system, including membrane separation, electrochemistry, photocatalysis, and biosorption. Additionally, several representative marine tests are summarized and restrictive factors of large-scale UES are analyzed. Finally, the further development of UES from laboratory to industry applications is promoted, with a focus on technological innovation. The goal is to stimulate innovative ideas and provide fresh insights for the future development of the UES system, bridging the gap between laboratory research and industrial implementation.

Alloying Confined Regulation of Nanoparticles in a Hierarchically Directed Porous Carbon for Zinc-Air Batteries

The rational design of non-noble metal-based electrocatalysts with efficient bifunctional catalytic activity is critical for the widespread application of zinc-air batteries (ZABs). In this study, an FeNi alloy encapsulated three-dimensional honeycomb-like network structure of carbon aerogels (FeNi/CAs) electrocatalyst was constructed using directional freeze-drying technology. The innovative architecture, combined with the synergistic effect between Fe and Ni, endows the FeNi/CAs catalyst with outstanding bifunctional catalytic activity compared with the introduction of a single metal in carbon aerogels. Specifically, the catalyst achieves a high half-wave potential (E1/2) of 0.90 V for the oxygen reduction reaction (ORR) and excellent stability with a negligible shift of E1/2 (9 mV) after 2000 cycles. Moreover, the FeNi/CAs catalyst exhibits a smaller potential difference (ΔE = 0.68 V) between the ORR and oxygen evolution reaction (OER), highlighting its superior bifunctional activity. Furthermore, the rechargeable ZABs with FeNi/CAs catalysts show remarkable power density (226 mW cm-2) and energy density (985 mWh kg-1), as well as over 1200 h of cycling stability. Additionally, the discharge rate performance of the assembled flexible all-solid-state battery based on this catalyst remains stable under different bending angles, suggesting its robustness and potential for use in wearable electronic devices. This work provides a compelling strategy for the construction of advanced electrocatalysts by leveraging hierarchical structural features and metal synergy, paving the way for high-performance and durable ZABs in next-generation energy storage applications.

Ultrafine Nanoclusters Unlocked 3d-4f Electronic Ladders for Efficient Electrocatalytic Water Oxidation

The vast extensional planes of two-dimensional (2D) nanomaterials are recognized as desirable ground for electrocatalytic reactions. However, they tend to exhibit catalytic inertia due to their surface-ordered coordination configurations. Herein, an in situ autoxidation strategy enables high-density grafting of ultrafine CeO2 nanoclusters on 2D Co(OH)2. Affluent active units were activated at the inert interface of Co(OH)2 via the formation of Co-O-Ce units. The optimized catalyst exhibits oxygen evolution reaction activity with an overpotential of 83 mV lower than that of Co(OH)2 at 10 mA cm-2. The cascade orbital coupling between Co (3d) and Ce (4f) in Co-O-Ce units drives electron transfer by unlocking a "d-f electron ladder". Meanwhile, the bond-order theorem analyses and the d-band center show that the occupancy of Co-3d-eg is optimized to balance the adsorption-desorption process of active sites to the key reaction intermediate *OOH, thereby making it easier to release oxygen. This work will drive the development of wider area electron modulation methods and provide guidance for the surface engineering of 2D nanomaterials.

Extending conducting channels in Fe-N-C by interfacial growth of CNTs with minimal metal loss for efficient ORR electrocatalysis

Achieving a high electrocatalytic performance using a completely metal-free electrocatalyst, preferably based on only carbonaceous materials, remains a challenge. Alternatively, an efficient composite of a carbon nanostructure and a non-noble metal with minimum dependence on a metal holds immense potential. Although single-atom catalysis brings superior performance, its complex synthetic strategy limits its large-scale implementation. Previous investigation has shown that atomic dispersion (Fe-Nx-C) is accompanied by higher metal-loss compared to nanoparticle formation (Fe-NPs-N-C). Therefore, to achieve minimum metal loss, we first incorporated iron nanoparticles (Fe NPs) to N-doped carbon (N-C) and then exposed them to a cheap carbon source, melamine at high temperature, resulting in the growth of carbon nanotubes (CNTs) catalysed by those Fe NPs loaded on N-C (Fe-NPs-N-C). Thermogravimetric analysis showed that the metal-retention in the composite is higher than that in the bare carbon nanotube and even the atomically dispersed Fe-active sites on N-C. The composite material (Fe-NPs-N-C/CNT) shows a high half-wave potential (0.89 V vs. RHE) which is superior to that of commercial Pt/C towards the oxygen reduction reaction (ORR). The enhanced activity is attributed to the synergistic effect of high conductivity of CNTs and active Fe-sites as the composite exceeds the individual electrocatalytic performance shown by Fe-CNTs & Fe-NPs-N-C, and even that of atomically dispersed Fe-active sites on N-C.

Tetrahedral Imidazolate Frameworks with Auxiliary Ligands (TIF-Ax): Synthetic Strategies and Applications

Zeolitic imidazolate frameworks (ZIFs) are an important subclass of metal-organic frameworks (MOFs). Recently, we reported a new kind of MOF, namely tetrahedral imidazolate frameworks with auxiliary ligands (TIF-Ax), by adding linear ligands (Hint) into the zinc-imidazolate system. Introducing linear ligands into the M2+-imidazolate system overcomes the limitation of imidazole derivatives. Thanks to the synergistic effect of two different types of ligands, a series of new TIF-Ax with interesting topologies and a special pore environment has been reported, and they have attracted extensive attention in gas adsorption, separation, catalysis, heavy metal ion capture, and so on. In this review, we give a comprehensive overview of TIF-Ax, including their synthesis methods, structural diversity, and multi-field applications. Finally, we also discuss the challenges and perspectives of the rational design and syntheses of new TIF-Ax from the aspects of their composition, solvent, and template. This review provides deep insight into TIF-Ax and a reference for scholars with backgrounds of porous materials, gas separation, and catalysis.

Research Progress on Porous Carbon-Based Non-Precious Metal Electrocatalysts

The development of efficient, stable, and economic electrocatalysts are key to the large-scale application of electrochemical energy conversion. Porous carbon-based non-precious metal electrocatalysts are considered to be the most promising materials to replace Pt-based catalysts, which are limited in large-scale applications due to high costs. Because of its high specific surface area and easily regulated structure, a porous carbon matrix is conducive to the dispersion of active sites and mass transfer, showing great potential in electrocatalysis. This review will focus on porous carbon-based non-precious metal electrocatalysts and summarize their new progress, focusing on the synthesis and design of porous carbon matrix, metal-free carbon-based catalysts, non-previous metal monatomic carbon-based catalyst, and non-precious metal nanoparticle carbon-based catalysts. In addition, current challenges and future trends will be discussed for better development of porous carbon-based non-precious metal electrocatalysts.

Acceleration of the semi-hydrogenation of alkynes over an N-doped porous carbon sphere-confined ultrafine PdCu bimetallic nanoparticle catalyst

Selective hydrogenation of alkynes to obtain alkenes is a key reaction in petrochemical and fine chemical industries. However, the development of stable and highly selective catalysts with uniformly dispersed active sites is still immensely challenging for the semi-hydrogenation of alkynes. In this study, N-doped porous carbon nanospheres (NPCNs) were synthesized by the nanoemulsion self-assembly and subsequently carbonization method. Ultrafine PdCu bimetallic nanoparticles (NPs) were uniformly dispersed and immobilized on NPCNs. The obtained PdCu/NPCNs catalyst exhibited an open framework and abundant active sites originating from ultrafine PdCu NPs. In the semi-hydrogenation of alkynes, the PdCu/NPCNs catalyst exhibited a remarkable performance and stability, outperforming most of the classical catalysts. The excellent performance was related to the introduction of a secondary metal Cu, which can regulate the electronic state of Pd active sites to further enhance the hydrogenation activity and selectivity. Hence, the facile approach reported herein may be useful for constructing highly dispersed bimetallic NP-based catalysts for selective hydrogenation of alkynes in the petrochemical industry.

MOF-derived nanoporous carbons with diverse tunable nanoarchitectures

Metal-organic frameworks (MOFs), or porous coordination polymers, are crystalline porous materials formed by coordination bonding between inorganic and organic species on the basis of the self-assembly of the reacting units. The typical characteristics of MOFs, including their large specific surface areas, ultrahigh porosities and excellent thermal and chemical stabilities, as well as their great potential for chemical and structural modifications, make them excellent candidates for versatile applications. Their poor electrical conductivity, however, has meant that they have not been useful for electrochemical applications. Fortuitously, the direct carbonization of MOFs results in a rearrangement of the carbon atoms of the organic units into a network of carbon atoms, which means that the products have useful levels of conductivity. The direct carbonization of zeolitic imidazolate framework (ZIF)-type MOFs, particularly ZIF-8, has successfully widened the scope of possible applications of MOFs to include electrochemical reactions that could be used in, for example, energy storage, energy conversion, electrochemical biosensors and capacitive deionization of saline water. Here, we present the first detailed protocols for synthesizing high-quality ZIF-8 and its modified forms of hollow ZIF-8, core-shell ZIF-8@ZIF-67 and ZIF-8@mesostuctured polydopamine. Typically, ZIF-8 synthesis takes 27 h to complete, and subsequent nanoarchitecturing procedures leading to hollow ZIF-8, ZIF-8@ZIF-67 and ZIF-8@mPDA take 6, 14 and 30 h, respectively. The direct-carbonization procedure takes 12 h. The resulting nanoporous carbons are suitable for electrochemical applications, in particular as materials for supercapacitors.

Non-Noble Metal Catalysts in Cathodic Oxygen Reduction Reaction of Proton Exchange Membrane Fuel Cells: Recent Advances

The oxygen reduction reaction (ORR) is one of the crucial energy conversion reactions in proton exchange membrane fuel cells (PEMFCs). Low price and remarkable catalyst performance are very important for the cathode ORR of PEMFCs. Among the various explored ORR catalysts, non-noble metals (transition metal: Fe, Co, Mn, etc.) and N co-doped C (M-N-C) ORR catalysts have drawn increasing attention due to the abundance of these resources and their low price. In this paper, the recent advances of single-atom catalysts (SACs) and double-atom catalysts (DACs) in the cathode ORR of PEMFCs is reviewed systematically, with emphasis on the synthesis methods and ORR performance of the catalysts. Finally, challenges and prospects are provided for further advancing non-noble metal catalysts in PEMFCs.

Metal-organic framework nanocrystal-derived hollow porous materials: Synthetic strategies and emerging applications

Metal-organic frameworks (MOFs) have garnered multidisciplinary attention due to their structural tailorability, controlled pore size, and physicochemical functions, and their inherent properties can be exploited by applying them as precursors and/or templates for fabricating derived hollow porous nanomaterials. The fascinating, functional properties and applications of MOF-derived hollow porous materials primarily lie in their chemical composition, hollow character, and unique porous structure. Herein, a comprehensive overview of the synthetic strategies and emerging applications of hollow porous materials derived from MOF-based templates and/or precursors is given. Based on the role of MOFs in the preparation of hollow porous materials, the synthetic strategies are described in detail, including (1) MOFs as removable templates, (2) MOF nanocrystals as both self-sacrificing templates and precursors, (3) MOF@secondary-component core-shell composites as precursors, and (4) hollow MOF nanocrystals and their composites as precursors. Subsequently, the applications of these hollow porous materials for chemical catalysis, electrocatalysis, energy storage and conversion, and environmental management are presented. Finally, a perspective on the research challenges and future opportunities and prospects for MOF-derived hollow materials is provided.

•

MOFs have garnered multi-disciplinary attention due to their unique inherent properties

•

Various synthetic strategies of MOFs-derived hollow porous materials are summarized

•

Emerging applications of MOFs-derived hollow porous materials are reviewed

High electrocatalytic activity of Pt on porous Nb-doped TiO2 nanoparticles prepared by aerosol-assisted self-assembly

This study explores an aerosol-assisted method to prepare an efficient support for the Pt catalyst of polymer electrolyte membrane fuel cells (PEMFCs). Titania nanoparticles and mesoporous niobium-doped titania nanoparticles were prepared by aerosol-assisted self-assembly using titanium(iv) isopropoxide and niobium(v) ethoxide as the titanium and niobium sources for application as non-carbon supports for the platinum electrocatalyst. The structural characteristics and electrochemical properties of the supports were investigated by transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, electron paramagnetic resonance, inductively coupled plasma optical emission spectrometry, and dynamic light scattering. The Brunauer-Emmett-Teller method was used to calculate the specific surface areas of the samples, and the pore size distribution was also examined. The results demonstrated that under a radial concentration gradient, the aerosol droplets self-assembled into a spherical shape, and mesoporous supports were obtained after subsequent removal of the surfactant cetyltrimethylammonium bromide by annealing and washing. The hydrothermal technique was then used to deposit platinum on the TiO2-based supports. The electrical conductivity of the non-carbon support was enhanced by the strong metal-support interaction effect between the platinum catalyst particles and the porous niobium-doped TiO2 support. The half-wave potential, electrochemical surface area, mass activity, and specific activity of the obtained Pt/Nb-TiO2 catalyst all surpassed those of commercial Pt/C.

A Top-Down Templating Strategy toward Functional Porous Carbons

Nanostructured carbon materials with high porosity and desired chemical functionalities are of immense interest because of their wide application potentials in catalysis, environment, and energy storage. Herein, a top-down templating strategy is presented for the facile synthesis of functional porous carbons, based on the direct carbonization of diverse organic precursors with commercially available metal oxide powders. During the carbonization, the metal oxide powders can evolve into nanoparticles that serve as in situ templates to introduce nanopores in carbons. The porosity and heteroatom doping of the prepared carbon materials can be engineered by varying the organic precursors and/or the metal oxides. It is further demonstrated that the top-down templating strategy is applicable to prepare carbon-based single-atom catalysts with iron-nitrogen sites, which exhibit a high power density of 545 mW cm^-2 in a H₂ -air proton exchange membrane fuel cell.

Rationalizing Structural Hierarchy in the Design of Fuel Cell Electrode and Electrolyte Materials Derived from Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are arguably a class of highly tuneable polymer-based materials with wide applicability. The arrangement of chemical components and the bonds they form through specific chemical bond associations are critical determining factors in their functionality. In particular, crystalline porous materials continue to inspire their development and advancement towards sustainable and renewable materials for clean energy conversion and storage. An important area of development is the application of MOFs in proton-exchange membrane fuel cells (PEMFCs) and are attractive for efficient low-temperature energy conversion. The practical implementation of fuel cells, however, is faced by performance challenges. To address some of the technical issues, a more critical consideration of key problems is now driving a conceptualised approach to advance the application of PEMFCs. Central to this idea is the emerging field MOF-based systems, which are currently being adopted and proving to be a more efficient and durable means of creating electrodes and electrolytes for proton−exchange membrane fuel cells. This review proposes to discuss some of the key advancements in the modification of PEMs and electrodes, which primarily use functionally important MOFs. Further, we propose to correlate MOF-based PEMFC design and the deeper correlation with performance by comparing proton conductivities and catalytic activities for selected works.

Electrothermally Driven Nucleation Energy Control of Defective Carbon and Nickel-Cobalt Oxide-Based Electrodes

Multielement metal/metal oxides/carbon-based support hybrids are promising candidates for high-performance electrodes. However, conventional solid-state synthesis utilizing slow heating-cooling rates is limited by discrepancies in their phase transition temperatures. Herein, we report a rational strategy to control the nucleation energy of defective carbon fibers (DCFs) and Ni-Co-oxide-based electrodes capable of electrochemical activation using electrothermal waves (ETWs). The ETWs, triggered by Joule heating passing through CFs and Ni-Co precursors, induce programmable high-temperature processes via adjustable input powers and durations. The first ETW (∼1500 °C) fabricates the presculpted DCFs, while the second ETW (∼600 °C) directly synthesizes NiCo₂O₄ spinel nanoparticles on the DCFs. Predesigning DCFs through the Gibbs free energy theory enables tunable control of nucleation energy and solution compatibility with Ni-Co precursors, allowing the morphological and compositional design of the optimal NiCo₂O₄@DCFs hybrids. Furthermore, they are electrochemically activated to change the morphologies and oxidation states of Ni-Co to more stable wrinkled structures strongly anchored to carbon supports and Ni-Co cations with low oxidation numbers. The activated NiCo₂O₄@DCFs electrodes exhibit outstanding specific capacitance and long-term cyclic stability (∼1925 F g^-1 and ∼115-123% for 20 000 cycles). The ETWs offer a facile yet precise method to predesign carbon supports and subsequently synthesize hybrid electrodes.

Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications

Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.

Identification of Catalytic Active Sites for Durable Proton Exchange Membrane Fuel Cell: Catalytic Degradation and Poisoning Perspectives

Recent progress in synthetic strategies, analysis techniques, and computational modeling assist researchers to develop more active catalysts including metallic clusters to single-atom active sites (SACs). Metal coordinated N-doped carbons (M-N-C) are the most auspicious, with a large number of atomic sites, markedly performing for a series of electrochemical reactions. This perspective sums up the latest innovative and computational comprehension, while giving credit to earlier/pioneering work in carbonaceous assembly materials towards robust electrocatalytic activity for proton exchange membrane fuel cells via inclusive performance assessment of the oxygen reduction reaction (ORR). M-N_x -C_y are exclusively defined active sites for ORR, so there is a unique possibility to intellectually design the relatively new catalysts with much improved activity, selectivity, and durability. Moreover, some SACs structures provide better performance in fuel cells testing with long-term durability. The efforts to understand the connection in SACs based M-N_x -C_y moieties and how these relate to catalytic ORR performance are also conveyed. Owing to comprehensive practical application in the field, this study has covered very encouraging aspects to the current durability status of M-N-C based catalysts for fuel cells followed by degradation mechanisms such as macro-, microdegradation, catalytic poisoning, and future challenges.

Template-free construction of hollow mesoporous carbon spheres from a covalent triazine framework for enhanced oxygen electroreduction

The construction of hollow mesoporous carbon nanospheres (HMCS) avoiding the use of traditional soft/hard templates is highly desired for nanoscience yet challenging. Herein, we report a simple and straightforward template-free strategy for preparing nitrogen, sulfur dual-doped HMCSs (N/S-HMCSs) as oxygen reduction reaction (ORR) electrocatalysts. The unique hollow spherical and mesoporous structure was in-situ formed via a thermally initiated hollowing pathway from an elaborately engineered covalent triazine framework. Regulation of pyrolysis temperatures contributed to precisely tailoring of the shell thickness of HMCSs. The resulting N/S-HMCS₉₀₀ (pyrolyzed at 900 °C) possessed high N and S contents, large specific surface areas, rich and uniform mesopores distribution. Consequently, as a metal-free ORR electrocatalyst, N/S-HMCS₉₀₀ exhibits a high half-wave potential, excellent methanol tolerance and great long-term durability. Additionally, density functional theory calculations demonstrate that N, S-dual dopant can create extra active sites with higher catalytic activity than the isolated N-dopant. This strategy provides new insights into the construction of hollow and mesoporous multi-heteroatom-doped carbon materials with tunable nanoarchitecture for various electrochemical applications.

Functionalized Iron-Nitrogen-Carbon Electrocatalyst Provides a Reversible Electron Transfer Platform for Efficient Uranium Extraction from Seawater

Uranium extraction from seawater provides an opportunity for sustainable fuel supply to nuclear power plants. Herein, an adsorption-electrocatalysis strategy is demonstrated for efficient uranium extraction from seawater using a functionalized iron-nitrogen-carbon (Fe-N_x -C-R) catalyst, comprising N-doped carbon capsules supporting FeN_x single-atom sites and surface chelating amidoxime groups (R). The amidoxime groups bring hydrophilicity to the adsorbent and offer surface-specific binding sites for UO₂ ²⁺ capture. The site-isolated FeN_x centres reduce adsorbed UO₂ ²⁺ to UO₂ ⁺ . Subsequently, through electrochemical reduction of the FeN_x sites, unstable U(V) ions are reoxidized to U(VI) in the presence of Na⁺ resulting in the generation of solid Na₂ O(UO₃ ·H₂ O)_x , which can easily be collected. Fe-N_x -C-R reduced the uranium concentration in seawater from ≈3.5 ppb to below 0.5 ppb with a calculated capacity of ≈1.2 mg g^-1 within 24 h. To the best of the knowledge, the developed system is the first to use the adsorption of uranyl ions and electrodeposition of solid Na₂ O(UO₃ .H₂ O)_x for the extraction of uranium from seawater. The important discoveries guide technology development for the efficient extraction of uranium from seawater.

Superstructured Macroporous Carbon Rods Composed of Defective Graphitic Nanosheets for Efficient Oxygen Reduction Reaction

Rationally designed carbon materials with superstructures are promising candidates in applications such as electrocatalysis. However, the synthesis of highly porous carbon superstructures with macropores and carbon defects from a simple crystalline solid remains challenging. In this work, superstructured macroporous carbon rods composed of defective graphitic nanosheets are synthesized by direct carbonization of crystalline poly tannic acid (PTA) rods as precursors. During carbonization, PTA rods with a highly ordered lamellar structure induce a spatially confined two-step localized contraction that takes place in different dimensions and directions in each step. The unexpected contraction behavior results in the sponge-like macroporous carbon superstructure with large surface area, high porosity, and abundant defects, thus showing a superior electrocatalytic performance with high activity and selectivity for oxygen reduction reaction. The study provides new understandings in the design of functional carbon materials with distinctive structures and applications.

Lamellar carbon-aluminosilicate nanocomposites with macroscopic orientation

Novel preparative approaches towards lamellar nanocomposites of carbon and inorganic materials are relevant for a broad range of technological applications. Here, we describe how to utilize the co-assembly of a liquid-crystalline hexaphenylene amphiphile and an aluminosilicate precursor to prepare carbon-aluminosilicate nanocomposites with controlled lamellar orientation and macroscopic order. To this end, the shear-induced alignment of a precursor phase of the two components resulted in thin films comprising lamellae with periodicities on the order of the molecular length scale, an "edge-on" orientation relative to the substrate and parallel to the shearing direction with order on the centimeter length scale. The lamellar structure, orientation, and macroscopic alignment were preserved in the subsequent pyrolysis that yielded the corresponding carbon-aluminosilicate nanocomposites.

Confined assembly of ultrathin nanoporous nitrogen-doped graphene nanofilms with dual metal coordination chemistry

Graphene oxide (GO) nanosheets with unique structure have received much attention in providing opportunity for high-performance membranes in separation. However, the rational design of ultrathin graphene membranes with controlled structures remains a big challenge. Here, we report a methodology to synthesize dual metal-coordinated ultrathin nanoporous graphene nanofilms by tailoring well-aligned nanocrystals as building blocks on heteroatom-doped GO nanosheets with tunable architectures. Manipulation of metal nitrate as bifunctional dopants realizes N-doping of graphene oxide and preferential growth of α-Mn₂O₃ nanocrystals. Generation of Mn-O-C bond during cross-linking greatly strengthens the stability of membranes for long-term steady operation. Meanwhile, because of spatial confinement effects and high binding energy, N-doped reduced GO nanosheets are desirable supports to construct numerous Mn-N-C bonds, thus generating artificial nanopores to significantly increase nanochannels for ultrafast mass transport. Moreover, the size-selective permeability of ultrathin nanoporous GO-based nanofilms can be optimized by managing the types of metal source for target coordination.

•

Dual metal-coordinated GO-based nanofilms are achieved by a general and facile method

•

Mn-N-C bonds are constructed in rGO nanosheets with N-containing coordinated links

•

Artificial nanopores are used to increase nanochannels for ultrafast mass transport

•

Generation of Mn-O-C bond greatly strengthens the stability of nanofilms in separation

Oxygen Reduction Electrocatalysts toward Practical Fuel Cells: Progress and Perspectives

Fuel cells are an incredibly powerful renewable energy technology, but their broad applications remains lagging because of the high cost and poor reliability of cathodic electrocatalysts for the oxygen reduction reaction (ORR). This review focuses on the recent progress of ORR electrocatalysts in fuel cells. More importantly, it highlights the fundamental problems associated with the insufficient activity translation from rotating disk electrode to membrane electrode assembly in the fuel cells. Finally, for the atomic-level in-depth information on ORR catalysts in fuel cells, potential perspectives are suggested, including large-scale preparation, unified assessment criteria, advanced interpretation techniques, advanced simulation and artificial intelligence. This review aims to provide valuable insights into the fundamental science and technical engineering for efficient ORR electrocatalysts in fuel cells.

In situ synthesis of nitrogen site activated cobalt sulfide@N, S dual-doped carbon composite for a high-performance asymmetric supercapacitor

Cobalt sulfides with high theoretical capacity are considered as potential electrodes for supercapacitors (SCs). However, the insufficient reactive sites and low electrical conductivity of bulky cobalt sulfides restrict their applications. Here, we proposed an efficient approach for in situ formation of nitrogen site activated cobalt sulfide@N, S dual-doped carbon composite (CS@NSC) by vulcanizing the cobalt-glutamine complex (CG) precursor in a tube furnace. The effects of the molecular structure and calcination temperature of CG precursors on the morphology, structure and electrochemical performance of CS@NSC were studied. The designed CS@NSC-2 exhibited a specific capacity of 593 C g^-1 at the current density of 1 A g^-1 and good cyclic stability with 88.7% retention after 2000 cycles. Moreover, an asymmetric supercapacitor (ASC) was fabricated by CS@NSC-2 (positive electrode) and activated carbon (AC) (negative electrode), which delivered ultra-high energy density of 67.8 Wh kg^-1 at a power density of 400 W kg^-1 and possessed 83.1% capacitance retention after 5000 cycles. The eco-friendly method was also suitable for synthesizing nickel sulfide. This work may provide an innovative horizon for the in situ formation of active sites in electrode materials.

Sponge Assembled by Graphene Nanocages with Double Active Sites to Accelerate Alkaline HER Kinetics

Elaborate design of novel hybrid structures for hydrogen-evolution electrocatalysts is a crucial strategy for synergistically accelerating the reaction kinetics of water splitting. Herein, we prepare a three-dimensional (3D) sponge assembled by graphene nanocages (SGNCs) in which Ni nanoparticles and Ni single atoms coexist via a facile one-pot self-templating and self-catalytic strategy. Driven by simultaneous atomization and agglomeration under higher temperature, dual active sites of single atoms and nanoparticles are formed on graphene nanocages. Benefiting from the unique 3D porous structure and dual active sites, the SGNCs exhibit excellent hydrogen evolution reaction (HER) performance, which affords the current density of 10 mA cm^-2 at a low overpotential of 27 mV. Theoretical calculations reveal that the interaction between single atoms and nanoparticles promotes HER kinetics. The controlled engineering strategy of non-noble metal-based hybrid materials provides prospects for innovative electrocatalyst development.

Evolution of Zn(II) single atom catalyst sites during the pyrolysis-induced transformation of ZIF-8 to N-doped carbons

The pyrolysis of zeolitic imidazolate frameworks (ZIFs) is becoming a popular approach for the synthesis of catalysts comprising porphyrin-like metal single atom catalysts (SACs) on N-doped carbons (M-N-C). Understanding the structural evolution of M-N-C as a function of ZIF pyrolysis temperature is important for realizing high performance catalysts. Herein, we report a detailed investigation of the evolution of Zn single atom catalyst sites during the pyrolysis of ZIF-8 at temperatures ranging from 500 to 900 °C. Results from Zn L-edge and Zn K-edge X-ray absorption spectroscopy studies reveal that tetrahedral ZnN₄ centers in ZIF-8 transform to porphyrin-like ZnN₄ centers supported on N-doped carbon at temperatures as low as 600 °C. As the pyrolysis temperature increased in the range 600-900 °C, the Zn atoms moved closer to the N₄ coordination plane. This subtle geometry change in the ZnN₄ sites alters the electron density on the Zn atoms (formally Zn²⁺), strongly impacting the catalytic performance for the peroxidase-like decomposition of H₂O₂. The catalyst obtained at 800 °C (Zn-N-C-800) offered the best performance for H₂O₂ decomposition. This work provides valuable new insights about the evolution of porphyrin-like single metal sites on N-doped carbons from ZIF precursors and the factors influencing SAC activity.

Heterogeneous Single-Atom Catalysts for Electrochemical CO2 Reduction Reaction

The electrochemical CO₂ reduction reaction (CO₂ RR) is of great importance to tackle the rising CO₂ concentration in the atmosphere. The CO₂ RR can be driven by renewable energy sources, producing precious chemicals and fuels, with the implementation of this process largely relying on the development of low-cost and efficient electrocatalysts. Recently, a range of heterogeneous and potentially low-cost single-atom catalysts (SACs) containing non-precious metals coordinated to earth-abundant elements have emerged as promising candidates for the CO₂ RR. Unfortunately, the real catalytically active centers and the key factors that govern the catalytic performance of these SACs remain ambiguous. Here, this ambiguity is addressed by developing a fundamental understanding of the CO₂ RR-to-CO process on SACs, as CO accounts for the major product from CO₂ RR on SACs. The reaction mechanism, the rate-determining steps, and the key factors that control the activity and selectivity are analyzed from both experimental and theoretical studies. Then, the synthesis, characterization, and the CO₂ RR performance of SACs are discussed. Finally, the challenges and future pathways are highlighted in the hope of guiding the design of the SACs to promote and understand the CO₂ RR on SACs.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Atomically dispersed metal–nitrogen–carbon catalysts for fuel cells: advances in catalyst design, electrode performance, and durability improvement

The review provides a comprehensive understanding of the atomically dispersed metal–nitrogen–carbon cathode catalysts for proton-exchange membrane fuel cell applications.

Tunable and convenient synthesis of highly dispersed Fe-N x catalysts from graphene-supported Zn-Fe-ZIF for efficient oxygen reduction in acidic media

The development of low-cost, efficient and stable electrocatalysts for the oxygen reduction reaction (ORR) is desirable but remains a great challenge. We report a convenient and efficient synthesis approach of highly dispersed Fe–N_x catalysts for ORR. Typically, Fe–Zn-ZIF (zeolitic imidazolate frameworks) nanocrystals cast as precursor and graphene as supports, highly dispersed Fe–N_x species were fabricated with PVP (polyvinyl pyrrolidone) as surfactant via pyrolysis. With the help of graphene and surfactant, the agglomeration of iron particles has been avoided during pyrolysis, and the size and morphology of ZIF particles intercalating into the graphene layers can be regulated precisely as well. The amount of Fe–N_x active sites in C-rGO-ZIF catalyst arrived 4.29%, which is obviously higher than most monodispersed non-precious metal catalysts reported. The obtained C-rGO-ZIF catalyst exhibits a high onset potential of 0.89 V and a half-wave potential of 0.77 V, which is only 30 mV away from Pt/C in acidic media. The active sites of the catalyst was characterized and found to be the highly dispersed Fe–N_x species, large and accessible specific surface area of graphene and abundant active nitrogen atoms. When the C-rGO-ZIF catalyst was applied in the cathode of fuel cell, the power density can reach up to 301 mW cm⁻², which highlights a practical application potential on small power supplies.

A tunable and convenient synthesis approach of highly dispersed Fe–N_x catalysts for ORR in acidic media was reported.

A dinuclear cobalt cluster as electrocatalyst for oxygen reduction reaction

Dinuclear metal clusters as metalloenzymes execute efficient catalytic activities in biological systems. Enlightened by this, a dinuclear {CoII 2} cluster was selected to survey its ORR (Oxygen Reduction Reaction) catalytic activities. The crystalline {CoII 2} possesses defined structure and potential catalytic active centers of {CoN4O2} sites, which was identified by X-ray single crystal diffraction, Raman and XPS. The appropriate supramolecular porosity combining abundant pyridinic-N and triazole-N sites of {CoII 2} catalyst synergistically benefit the ORR performance. As a result, this non-noble metal catalyst presents a nice ORR electrocatalytic activity and abides by a nearly 4-electron reduction pathway. Thus, this unpyrolyzed crystalline catalyst clearly provide precise active sites and the whole defined structural information, which can help researcher to design and fabricate efficient ORR catalysts to improve their activities. Considering the visible crystal structure, a single cobalt center-mediated catalytic mechanism was also proposed to elucidate the ORR process.

Facile synthesis of impurity-free iron single atom catalysts for highly efficient oxygen reduction reaction and active-site identification

A precursor-dilution strategy is developed to prepare an impurity-free Fe single atom catalyst with superior oxygen reduction reaction catalytic performance.