Ordered Intermetallic Pd3Bi Prepared by an Electrochemically Induced Phase Transformation for Oxygen Reduction Electrocatalysis

Modulating the Bader Charge Transfer in Single p-Block Atoms Doped Pd Metallene for Enhanced Oxygen Reduction Electrocatalysis

Metallene is considered as an emerging family of electrocatalysts due to its atomically layered structure and unique surface stress. Here we propose a strategy to modulate the Bader charge transfer (BCT) between Pd surface and oxygenated intermediates via p-d electronic interaction by introducing single-atom p-block metal (M=In, Sn, Pb, Bi) into Pd metallene nanosheets towards efficient oxygen reduction reaction (ORR). X-ray absorption and photoelectron spectroscopy suggests that doping p-block metals could facilitate electron transfer to Pd sites and thus downshift the d-band center of Pd and weaken the adsorption energy of O intermediates. Among them, the developed Bi-Pd metallene shows extraordinarily high ORR mass activity of 11.34 A mgPd -1 and 0.86 A mgPd -1 at 0.9 V and 0.95 V in alkaline solution, respectively, representing the best Pd-based ORR electrocatalysts ever reported. In the cathode of a Zinc-air battery, Bi-Pd metallene could achieve an open-circuit voltage of 1.546 V and keep stable for 760 h at 10 mA cm-2. Theoretical calculations suggest that the BCT between Pd surface and *OO intermediates greatly affects the bond length between them (dPd-*OO) and Bi doping could appropriately reduce the amount of BCT and stretch the dPd-*OO, thus enhancing the ORR activity.

Surface-Enriched Single-Bi-Atoms Tailoring of Pt Nanorings for Direct Methanol Fuel Cells with Ultralow-Pt-Loading

Single-atom decorating of Pt emerges as a highly effective strategy to boost catalytic properties, which can trigger the most Pt active sites while blocking the smallest number of Pt atoms. However, the rational design and creation of high-density single-atoms on Pt surface remain as a huge challenge. Herein, a customized synthesis of surface-enriched single-Bi-atoms tailored Pt nanorings (SE-Bi1/Pt NRs) toward methanol oxidation is reported, which is guided by the density functional theory (DFT) calculations suggesting that a relatively higher density of Bi species on Pt surface can ensure a CO-free pathway and accelerate the kinetics of *HCOOH formation. Decorating Pt NRs with dense single-Bi-atoms is achieved by starting from PtBi intermetallic nanoplates (NPs) with intrinsically isolated Bi atoms and subsequent etching and annealing treatments. The SE-Bi1/Pt NRs exhibit a mass activity of 23.77 A mg-1 Pt toward methanol oxidation in alkaline electrolyte, which is 2.2 and 12.8 times higher than those of Pt-Bi NRs and Pt/C, respectively. This excellent activity endows the SE-Bi1/Pt NRs with a high likelihood to be used as a practical anodic electrocatalyst for direct methanol fuel cells （DMFCs） with high power density of 85.3 mW cm-2 and ultralow Pt loading of 0.39 mg cm-2.

Regulation of Catalyst Immediate Environment Enables Acidic Electrochemical Benzyl Alcohol Oxidation to Benzaldehyde

Electrocatalytic alcohol oxidation in acid offers a promising alternative to the kinetically sluggish water oxidation reaction toward low-energy H2 generation. However, electrocatalysts driving active and selective acidic alcohol electrochemical transformation are still scarce. In this work, we demonstrate efficient alcohol-to-aldehyde conversion achieved by reticular chemistry-based modification of the catalyst's immediate environment. Specifically, coating a Bi-based electrocatalyst with a thin layer of metal-organic framework (MOF) substantially improves its performance toward benzyl alcohol electro-oxidation to benzaldehyde in a 0.1 M H2SO4 electrolyte. Detailed analysis reveals that the MOF adlayer influences catalysis by increasing the reactivity of surface hydroxides as well as weakening the catalyst-benzaldehyde binding strength. In turn, low-potential (0.65 V) cathodic H2 evolution was obtained through coupling it with anodic benzyl alcohol electro-oxidation. Consequently, the presented approach could be implemented in a wide range of electrocatalytic oxidation reactions for energy-conversion application.

Pd3Bi intermetallic particles prepared by the photodeposition method for photocatalytic ethane production from methane

A Pd3Bi intermetallic compound (IMC) was photocatalytically deposited onto the gallium oxide (Ga2O3) surface at room temperature. Conventional impregnation and reduction methods were difficult for the formation of the Pd3Bi IMC on Ga2O3, highlighting the importance of the photodeposition approach. The Pd3Bi-loaded Ga2O3 photocatalyst exhibited 84% selectivity in methane-to-ethane conversion with hydrogen production in the presence of water vapour.

Atomic Ordering Engineering of Precious Metal Alloys in Liquid Phase Synthesis

Atomic ordering of noble metal alloys is an effective strategy for improving catalytic performance, yet the low-temperature synthesis of ordered alloys still faces significant challenges. The low-temperature liquid phase method has enormous potential for the synthesis of alloys; however, the atomic ordering mechanism of this process has not been thoroughly studied. Herein, we investigate the mechanism of the influence of metal precursors, reducing agents, solvents, and mixing modes of reactant regulating strategies on precious metal alloy ordering using this method. These regulating strategies are designed to change the coordination structure of metal complexes, affect the reduction potential of metals, and thus change the reduction order of metals and their arrangement in the alloy products. Notably, the reduction potential differences between metal complexes can be used to predict the ordering of the synthetic products (Pd-Cu, Pd-Cd, Pd-Sn, Pd-Pb, and Pt-Sn). This work provides an excellent platform for investigating atomic arrangement engineering.

General synthesis and atomic arrangement identification of ordered Bi-Pd intermetallics with tunable electrocatalytic CO2 reduction selectivity

Intermetallic compounds (IMCs) with fixed chemical composition and ordered crystallographic arrangement are highly desirable platforms for elucidating the precise correlation between structures and performances in catalysis. However, diffusing a metal atom into a lattice of another metal to form a controllably regular metal occupancy remains a huge challenge. Herein, we develop a general and tractable solvothermal method to synthesize the Bi-Pd IMCs family, including Bi2Pd, BiPd, Bi3Pd5, Bi2Pd5, Bi3Pd8 and BiPd3. By employing electrocatalytic CO2 reduction as a model reaction, we deeply elucidated the interplay between Bi-Pd IMCs and key intermediates. Specific surface atomic arrangements endow Bi-Pd IMCs different relative surface binding affinities and adsorption configuration for *OCHO, *COOH and *H intermediate, thus exhibiting substantially selective generation of formate (Bi2Pd), CO (BiPd3) and H2 (Bi2Pd5). This work provides a comprehensive understanding of the specific structure-performance correlation of IMCs, which serves as a valuable paradigm for precisely modulating catalyst material structures.

Electrochemically Induced Phase Transformation in Vanadium Oxide Boosts Zn-Ion Intercalation

Vanadium oxides are excellent cathode materials with large storage capacities for aqueous zinc-ion batteries, but their further development has been hampered by their low electronic conductivity and slow Zn2+ diffusion. Here, an electrochemically induced phase transformation strategy is proposed to mitigate and overcome these barriers. In situ X-ray diffraction analysis confirms the complete transformation of tunnel-like structural V6O13 into layered V5O12·6H2O during the initial electrochemical charging process. Theoretical calculations reveal that the phase transformation is crucial to reducing the Zn2+ migration energy barrier and facilitating fast charge storage kinetics. The calculated band structures indicate that the bandgap of V5O12·6H2O (0.0006 eV) is lower than that of V6O13 (0.5010 eV), which enhanced the excitation of charge carriers to the conduction band, favoring electron transfer in redox reactions. As a result, the transformed V5O12·6H2O delivers a high capacity of 609 mA h g-1 at 0.1 A g-1, superior rate performance (300 mA h g-1 at 20 A g-1), fast-charging capability (<7 min charging for 465 mA h g-1), and excellent cycling stability with a reversible capacity of 346 mA h g-1 at 5 A g-1 after 5000 cycles.

Intermetallic Nanocrystals for Fuel-Cells-Based Electrocatalysis

Electrocatalysis underpins the renewable electrochemical conversions for sustainability, which further replies on metallic nanocrystals as vital electrocatalysts. Intermetallic nanocrystals have been known to show distinct properties compared to their disordered counterparts, and been long explored for functional improvements. Tremendous progresses have been made in the past few years, with notable trend of more precise engineering down to an atomic level and the investigation transferring into more practical membrane electrode assembly (MEA), which motivates this timely review. After addressing the basic thermodynamic and kinetic fundamentals, we discuss classic and latest synthetic strategies that enable not only the formation of intermetallic phase but also the rational control of other catalysis-determinant structural parameters, such as size and morphology. We also demonstrate the emerging intermetallic nanomaterials for potentially further advancement in energy electrocatalysis. Then, we discuss the state-of-the-art characterizations and representative intermetallic electrocatalysts with emphasis on oxygen reduction reaction evaluated in a MEA setup. We summarize this review by laying out existing challenges and offering perspective on future research directions toward practicing intermetallic electrocatalysts for energy conversions.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Honeycomb Constructs in the La-Ni Intermetallics: Controlling Dimensionality via p-Element Substitution

The new ternary compounds La15Ni13Bi5 and La9Ni8Sn5 were obtained by arc melting under argon from appropriate amounts of the elements and subsequent annealing at 800 °C for 2 weeks. Single-crystal X-ray diffraction reveals that they represent two new structure types: La15Ni13Bi5 crystallizes in the hexagonal space group P62m [hP33, a = 14.995(3), c = 4.3421(10) Å, V = 845.5(4) Å3, Z = 1] and La9Ni8Sn5 in P63/m [hP88, a = 23.870(15), c = 4.433(3) Å, V = 2187(3) Å3, Z = 4]. The crystal structures of both compounds are characterized by hexagonal honeycomb-based motifs formed by Ni and Sn that extend along the c axis. The building motif with its three-blade wind turbine shape is reminiscent of the organic molecule triptycene and is unprecedented in extended solids. First-principles calculations have been performed in order to analyze the electronic structure and provide insight into chemical bonding. They reveal significant electron transfer from La to Ni and the respective p-element, which supports the formation of the polyanionic Ni-p-element network. DFT calculations suggest paramagnetic-like behavior for both compounds, which was confirmed by magnetic measurements.

Structural Transformation of Unconventional-Phase Materials

The structural transformation of materials, which involves the evolution of different structural features, including phase, composition, morphology, etc., under external conditions, represents an important fundamental phenomenon and has drawn substantial research interest. Recently, materials with unconventional phases that are different from their thermodynamically stable ones have been demonstrated to possess distinct properties and compelling functions and can further serve as starting materials for structural transformation studies. The identification and mechanism study of the structural transformation process of unconventional-phase starting materials can not only provide deep insights into their thermodynamic stability in potential applications but also offer effective approaches for the synthesis of other unconventional structures. Here, we briefly summarize the recent research progress on the structural transformation of some typical starting materials with various unconventional phases, including the metastable crystalline phase, amorphous phase, and heterophase, induced by different approaches. The importance of unconventional-phase starting materials in the structural modulation of resultant intermediates and products will be highlighted. The employment of diverse in situ/operando characterization techniques and theoretical simulations in studying the mechanism of the structural transformation process will also be introduced. Finally, we discuss the existing challenges in this emerging research field and provide some future research directions.

Maneuvering the Peroxidase-Like Activity of Palladium-Based Nanozymes by Alloying with Oxophilic Bismuth for Biosensing

Engineering the catalytic performance of nanozymes is of vital importance for their broad applications in biological analysis, cancer treatment, and environmental management. Herein, a strategy to boost the peroxidase-like activity of Pd-based nanozymes with oxophilic metallic bismuth (Bi) is demonstrated, which is based on the incorporation of oxophilic Bi in the Pd-based alloy nanocrystals (NCs). To synthesize PdBi alloy NCs, a seed-mediated method is employed with the assistance of underpotential deposition (UPD) of Bi on Pd. The strong interaction of Bi atoms with Pd surfaces favors the formation of alloy structures with controllable shapes and excellent monodispersity. More importantly, the PdBi NCs show excellent peroxidase-like activities compared with pristine Pd NCs. The structure-function correlations for the PdBi nanozymes are elucidated, and an indirect colorimetric method based on cascade reactions to determine alkaline phosphatase (ALP) is established. This method has good linear range, low detection limit, excellent selectivity, and anti-interference. Collectively, this work not only provides new insights for the design of high-efficiency nanozymes, expands the colorimetric sensing platform based on enzyme cascade reactions, but also represents a new example for UPD-directed synthesis of alloy NCs.

Small molecule-assisted synthesis of carbon supported platinum intermetallic fuel cell catalysts

Supported ordered intermetallic compounds exhibit superior catalytic performance over their disordered alloy counterparts in diverse reactions. But the synthesis of intermetallic compounds catalysts often requires high-temperature annealing that leads to the sintering of metals into larger crystallites. Herein, we report a small molecule-assisted impregnation approach to realize the general synthesis of a family of intermetallic catalysts, consisting of 18 binary platinum intermetallic compounds supported on carbon blacks. The molecular additives containing heteroatoms (that is, O, N, or S) can be coordinated with platinum in impregnation and thermally converted into heteroatom-doped graphene layers in high-temperature annealing, which significantly suppress alloy sintering and insure the formation of small-sized intermetallic catalysts. The prepared optimal PtCo intermetallics as cathodic oxygen-reduction catalysts exhibit a high mass activity of 1.08 A mg_Pt^-1 at 0.9 V in H₂-O₂ fuel cells and a rated power density of 1.17 W cm^-2 in H₂-air fuel cells.

High-Entropy Intermetallic PtRhBiSnSb Nanoplates for Highly Efficient Alcohol Oxidation Electrocatalysis

The control of multimetallic ensembles at the atomic-level is challenging, especially for high-entropy alloys (HEAs) possessing five or more elements. Herein, the one-pot synthesis of hexagonal-close-packed (hcp) PtRhBiSnSb high-entropy intermetallic (HEI) nanoplates with intrinsically isolated Pt, Rh, Bi, Sn, and Sb atoms is reported, to boost the electrochemical oxidation of liquid fuels. Taking advantage of these combined five metals, the well-defined PtRhBiSnSb HEI nanoplates exhibit a remarkable mass activity of 19.529, 15.558, and 7.535 A mg^-1 _Pt+Rh toward the electrooxidation of methanol, ethanol, and glycerol in alkaline electrolytes, respectively, representing a state-of-the-art multifunctional electrocatalyst for alcohol oxidation reactions. In particular, the PtRhBiSnSb HEI achieves record-high methanol oxidation reaction (MOR) activity in an alkaline environment. Theoretical calculations demonstrate that the introduction of the fifth metal Rh enhances the electron-transfer efficiency in PtRhBiSnSb HEI nanoplates, which contributes to the improved oxidation capability. Meanwhile, robust electronic structures of the active sites are achieved due to the synergistic protections from Bi, Sn, and Sb sites. This work offers significant research advances in developing well-defined HEA with delicate control over compositions and properties.

Ordered intermetallic compounds combining precious metals and transition metals for electrocatalysis

Ordered intermetallic alloys with significantly improved activity and stability have attracted extensive attention as advanced electrocatalysts for reactions in polymer electrolyte membrane fuel cells (PEMFCs). Here, recent advances in tuning intermetallic Pt- and Pd-based nanocrystals with tunable morphology and structure in PEMFCs to catalyze the cathodic reduction of oxygen and the anodic oxidation of fuels are highlighted. The fabrication/tuning of ordered noble metal-transition metal-bonded intermetallic PtM and PdM (M = Fe, Co) nanocrystals by using high temperature annealing treatments to promote the activity and stability of electrocatalytic reactions are discussed. Furthermore, the further improvement of the efficiency of this unique ordered intermetallic alloys for electrocatalysis are also proposed and discussed. This report aims to demonstrate the potential of the ordered intermetallic strategy of noble and transition metals to facilitate electrocatalysis and facilitate more research efforts in this field.

Alloyed PdCu Nanoparticles within Siliceous Zeolite Crystals for Catalytic Semihydrogenation

Selective hydrogenation of acetylene to ethylene is an industrially important process to purify the raw ethylene stream for producing high-grade polyethylene. The supported Pd catalyst exhibits superior activity for acetylene hydrogenation but suffers from poor ethylene selectivity because of the easy overhydrogenation to produce ethane. Here, we report that the PdCu alloy nanoparticles within siliceous zeolite crystals effectively tuned Pd-catalyzed overhydrogenation into semihydrogenation. This catalyst displayed an ethylene selectivity of 92.9% with a full conversion of acetylene. Mechanism studies reveal that the zeolite fixation stabilized the alloyed structure, where the electron-enriched Pd surface benefits the rapid ethylene desorption to hinder the deep hydrogenation. This work provides an efficient strategy for a rational design of bimetallic metal catalysts for selective hydrogenations.

Imidazolium ionic Liquid-Regulated Sub-5-nm Pt(111) with a stable configuration anchored on hollow carbon nanoshells for efficient oxygen reduction

Here, N-doped hollow carbon sphere (NHCS)-supported (111)-plane-engineered sub-5-nm Pt (Pt-NHCS) catalysts regulated precisely by imidazolium ionic liquids were synthesized successfully and used to catalyze oxygen reduction. The (111)-plane engineered Pt nanocrystals with a diameter of 4.5 ± 0.5 nm were homogeneously deposited on the 3-dimensional spherical nanoshells. The resulting Pt nanocrystals anchored on the carbon skeleton exhibit a stable configuration in both alkaline and acid electrolytes with the help of imidazolium cations and pyrolysis. Among all as-prepared catalysts, the optimized Pt-NHCS shows remarkable long-term durability. Specifically, Pt-NHCS maintains 95.3% of the original current density after 10,000 potential cycles, while Pt/C benchmarks exhibit a retention of 78.5%. Accelerated durability test results indicate that Pt-NHCS exhibits a high efficiency of 96 % in comparison with initial current density, while a value of 86% for Pt/C. Density functional theory calculations demonstrate that reactive Pt(111) planes with well-defined Schottky defects and vacancies adsorb and activate oxygen molecule rapidly while desorbing the reaction intermediates.

Noble Metal-Based Multimetallic Nanoparticles for Electrocatalytic Applications

Noble metal-based multimetallic nanoparticles (NMMNs) have attracted great attention for their multifunctional and synergistic effects, which offer numerous catalytic applications. Combined experimental and theoretical studies have enabled formulation of various design principles for tuning the electrocatalytic performance through controlling size, composition, morphology, and crystal structure of the nanoparticles. Despite significant advancements in the field, the chemical synthesis of NMMNs with ideal characteristics for catalysis, including high activity, stability, product-selectivity, and scalability is still challenging. This review provides an overview on structure-based classification and the general synthesis of NMMN electrocatalysts. Furthermore, postsynthetic treatments, such as the removal of surfactants to optimize the activity, and utilization of NMMNs onto suitable support for practical electrocatalytic applications are highlighted. In the end, future direction and challenges associated with the electrocatalysis of NMMNs are covered.

Ultrathin PdAuBiTe Nanosheets as High-Performance Oxygen Reduction Catalysts for a Direct Methanol Fuel Cell Device

Ultrathin 2D metal nanostructures have sparked a lot of research interest because of their improved electrocatalytic properties for fuel cells. So far, no effective technique for preparing ultrathin 2D Pd-based metal nanostructures with more than three compositions has been published. Herein, a new visible-light-induced template technique for producing PdAuBiTe alloyed 2D ultrathin nanosheets is developed. The mass activity of the PdAuBiTe nanosheets against the oxygen reduction reaction (ORR) is 2.48 A mg_Pd ^-1 , which is 27.5/17.7 times that of industrial Pd/C/Pt/C, respectively. After 10 000 potential cyclings, there is no decrease in ORR activity. The PdAuBiTe nanosheets exhibit high methanol tolerance and in situ anti-CO poisoning properties. The PdAuBiTe nanosheets, as cathode electrocatalysts in direct methanol fuel cells, can thus give significant improvement in terms of power density and durability. In O₂ /air, the power density can be increased to 235.7/173.5 mW cm^-2 , higher than that reported in previous work, and which is 2.32/3.59 times higher than Pt/C.

Improvement of Oxygen Reduction Performance in Alkaline Media by Tuning Phase Structure of Pd-Bi Nanocatalysts

Tuning the crystal phase of bimetallic nanocrystals offers an alternative avenue to improving their electrocatalytic performance. Herein, we present a facile and one-pot synthesis approach that is used to enhance the catalytic activity and stability toward oxygen reduction reaction (ORR) in alkaline media via control of the crystal structure of Pd-Bi nanocrystals. By merely altering the types of Pd precursors under the same conditions, the monoclinic structured Pd₅Bi₂ and conventional face-centered cubic (fcc) structured Pd₃Bi nanocrystals with comparable size and morphology can be precisely synthesized, respectively. Interestingly, the carbon-supported monoclinic Pd₅Bi₂ nanocrystals exhibit superior ORR activity in alkaline media, delivering a mass activity (MA) as high as 2.05 A/mg_Pd. After 10,000 cycles of ORR durability test, the monoclinic structured Pd₅Bi₂/C nanocatalysts still remain a MA of 1.52 A/mg_Pd, which is 3.6 times, 16.9 times, and 21.7 times as high as those of the fcc Pd₃Bi/C counterpart, commercial Pd/C, and Pt/C electrocatalysts, respectively. Moreover, structural characterizations of the monoclinic Pd₅Bi₂/C nanocrystals after the durability test demonstrate the excellent retention of the original size, morphology, composition, and crystal phase, greatly alleviating the leaching of the Bi component. This work provides new insight for the synthesis of multimetallic catalysts with a metastable phase and demonstrates phase-dependent catalytic performance.

Advanced Oxygen Electrocatalyst for Air-Breathing Electrode in Zn-Air Batteries

The electrochemical reduction of oxygen to water and the evolution of oxygen from water are two important electrode reactions extensively studied for the development of electrochemical energy conversion and storage technologies based on oxygen electrocatalysis. The development of an inexpensive, highly active, and durable nonprecious-metal-based oxygen electrocatalyst is indispensable for emerging energy technologies, including anion exchange membrane fuel cells, metal-air batteries (MABs), water electrolyzers, etc. The activity of an oxygen electrocatalyst largely decides the overall energy storage performance of these devices. Although the catalytic activities of Pt and Ru/Ir-based catalysts toward an oxygen reduction reaction (ORR) and an oxygen evolution reaction (OER) are known, the high cost and lack of durability limit their extensive use for practical applications. This review article highlights the oxygen electrocatalytic activity of the emerging non-Pt and non-Ru/Ir oxygen electrocatalysts including transition-metal-based random alloys, intermetallics, metal-coordinated nitrogen-doped carbon (M-N-C), and transition metal phosphides, nitrides, etc., for the development of an air-breathing electrode for aqueous primary and secondary zinc-air batteries (ZABs). Rational surface and chemical engineering of these electrocatalysts is required to achieve the desired oxygen electrocatalytic activity. The surface engineering increases the number of active sites, whereas the chemical engineering enhances the intrinsic activity of the catalyst. The encapsulation or integration of the active catalyst with undoped or heteroatom-doped carbon nanostructures affords an enhanced durability to the active catalyst. In many cases, the synergistic effect between the heteroatom-doped carbon matrix and the active catalyst plays an important role in controlling the catalytic activity. The ORR activity of these catalysts is evaluated in terms of onset potential, number of electrons transferred, limiting current density, and durability. The bifunctional oxygen electrocatalytic activity and ZAB performance, on the other hand, are measured in terms of potential gap between the ORR and OER, ΔE = E_j10^OER - E_1/2^ORR, specific capacity, peak power density, open circuit voltage, voltaic efficiency, and charge-discharge cycling stability. The nonprecious metal electrocatalyst-based ZABs are very promising and they deliver high power density, specific capacity, and round-trip efficiency. The active site for oxygen electrocatalysis and challenges associated with carbon support is briefly addressed. Despite the considerable progress made with the emerging electrocatalysts in recent years, several issues are yet to be addressed to achieve the commercial potential of rechargeable ZAB for practical applications.

Atomic Regulation of PGM Electrocatalysts for the Oxygen Reduction Reaction

With the increasing enthusiasm for the hydrogen economy and zero-emission fuel cell technologies, intensive efforts have been dedicated to the development of high-performance electrocatalytic materials for the cathodic oxygen reduction reaction (ORR). Some major fundamental breakthroughs have been made in the past few years. Therefore, reviewing the most recent development of platinum-group-metal (PGM) ORR electrocatalysts is of great significance to pushing it forward. It is known that the ORR on the fuel cell electrode is a heterogeneous reaction occurring at the solid/liquid interface, wherein the electron reduces the oxygen along with species in the electrolyte. Therefore, the ORR kinetic is in close correlation with the electronic density of states and wave function, which are dominated by the localized atomic structure including the atomic distance and coordination number (CN). In this review, the recent development in the regulation over the localized state on the catalyst surface is narrowed down to the following structural factors whereby the corresponding strategies include: the crystallographic facet engineering, phase engineering, strain engineering, and defect engineering. Although these strategies show distinctive features, they are not entirely independent, because they all correlate with the atomic local structure. This review will be mainly divided into four parts with critical analyses and comparisons of breakthroughs. Meanwhile, each part is described with some more specific techniques as a methodological guideline. It is hoped that the review will enhance an insightful understanding on PGM catalysts of ORR with a visionary outlook.

Facet-controlled palladium nanocrystalline for enhanced nitrate reduction towards ammonia

Electrochemical nitrate reduction reaction (NO₃^-RR) is considered an appealing way for producing ammonia (NH₃) under ambient conditions and solving environmental problems caused by nitrate, whereas the lack of adequate catalysts hampers the development of NO₃^-RR. Here, we firstly demonstrate that the Pd nanocrystalline with a well-desired facet can act as a highly efficient NO₃^-RR electrocatalyst for ambient ammonia synthesis. Pd (1 1 1) exhibits excellent activity and selectivity in reducing NO₃^- to NH₄⁺ with a Faradaic efficiency of 79.91% and an NH₄⁺ production of 0.5485 mmol h^-1 cm^-2 (2.74 mmol h^-1 mg^-1) in 0.1 M Na₂SO₄ (containing 0.1 M NO₃^-), which is 1.4 times higher than Pd (1 0 0) and 1.9 times higher than Pd (1 1 0), respectively. Density functional theory (DFT) calculation reveals that the superior NO₃^-RR activity of Pd (1 1 1) originates from its optimized activity of NO₃^- adsorption, smaller free energy change of the rate-limiting step (*NH₃ to NH₃), and poorer hydrogen evolution reaction activity (HER, competitive reaction). This work not only highlights the potentials of Pd-based nanocatalysts for NO₃^-RR but also provides new insight for the applications in NO₃^-RR of other facet-orientation nanomaterials.

Nanoporous Intermetallic Pd3 Bi for Efficient Electrochemical Nitrogen Reduction

Electrocatalytic nitrogen reduction at ambient temperature is a green technology for artificial nitrogen fixation but greatly challenging with low yield and poor selectivity. Here, a nanoporous ordered intermetallic Pd₃ Bi prepared by converting chemically etched nanoporous PdBi₂ exhibits efficient electrocatalytic nitrogen reduction under ambient conditions. The resulting nanoporous intermetallic Pd₃ Bi can achieve high activity and selectivity with an NH₃ yield rate of 59.05 ± 2.27 µg h^-1 mg_cat ^-1 and a Faradaic efficiency of 21.52 ± 0.71% at -0.2 V versus the reversible hydrogen electrode in 0.05 m H₂ SO₄ electrolyte, outperforming most of the reported catalysts in electrochemical nitrogen reduction reaction (NRR). Operando X-ray absorption spectroscopy studies combined with density functional theory calculations reveal that strong coupling between the Pd-Bi sites bridges the electron-transfer channel of intermetallic Pd₃ Bi, in which the Bi sites can absorb N₂ molecules and lower the energy barrier of *N₂ for N₂ adsorption and activation. Meanwhile, the intermetallic Pd₃ Bi with bicontinuous nanoporous structure can accelerate the electron transport during the NRR process, thus improving the NRR performance.

A Tensile-Strained Pt-Rh Single-Atom Alloy Remarkably Boosts Ethanol Oxidation

The rational design and control of electrocatalysts at single-atomic sites could enable unprecedented atomic utilization and catalytic properties, yet it remains challenging in multimetallic alloys. Herein, the first example of isolated Rh atoms on ordered PtBi nanoplates (PtBi-Rh₁ ) by atomic galvanic replacement, and their subsequent transformation into a tensile-strained Pt-Rh single-atom alloy (PtBi@PtRh₁ ) via electrochemical dealloying are presented. Benefiting from the Rh₁ -tailored Pt (110) surface with tensile strain, the PtBi@PtRh₁ nanoplates exhibit record-high and all-round superior electrocatalytic performance including activity, selectivity, stability, and anti-poisoning ability toward ethanol oxidation in alkaline electrolytes. Density functional theory calculations reveal the synergism between effective Rh₁ and tensile strain in boosting the adsorption of ethanol and key surface intermediates and the CC bond cleavage of the intermediates. The facile synthesis of the tensile-strained single-atom alloy provides a novel strategy to construct model nanostructures, accelerating the development of highly efficient electrocatalysts.

Atomistic Imaging of Competition between Surface Diffusion and Phase Transition during the Intermetallic Formation of Faceted Particles

To explore the ordering mechanism of facet alloy nanocrystals with randomly distributed atoms, we investigate kinetic and thermodynamic behaviors of the ordering phase transition from face-centered cubic Pt₃Co nanocrystals to L1₂-Pt₃Co intermetallic nanocrystals. It is observed that the ordering occurs from the surface and then gradually into the interior in a layer-by-layer mode, involving the competition between two kinds of phase transition modes: long-range surface diffusion-induced phase transition (SDIPT) and short-range reconstruction-induced body phase transition (RIBPT). The density functional theory calculations demonstrate that the surface status acts as a pivotal part in the thermodynamics and kinetics of the nanoscale ordering transition. With the development of the controllable heating process, both SDIPT and RIBPT modes can be manipulated as well as the morphology of the final product. This in situ work lays the foundations for potentially realizing shape-controlled intermetallic nanostructures by utilizing the thermal annealing method and makes preparations for the rational design of the surface and near-surface atomic configurations at the atomic scale.

Bismuth-induced synthesis of Au-X (X = Pt, Pd) nanoalloys for electrocatalytic reactions

Bismuth was introduced as an intermediate to produce Au-X (X = Pt and Pd) bimetallic nanoalloys using the galvanic replacement reaction. The results showed that the Au-X nanoalloys have good activity for electrocatalytic reactions in alkaline media. This strategy can provide an option for the formation of multimetal nanoalloys with similar electrochemical potentials and compositions.

Synergistic Bimetallic Metallic Organic Framework-Derived Pt-Co Oxygen Reduction Electrocatalysts

The rational design of Pt-based electrocatalysts is of paramount importance for the commercialization of proton exchange membrane fuel cells (PEMFCs). Pt-Co alloys and nitrogen-doped carbons have been shown to be effective in enhancing the kinetics of the oxygen reduction reaction (ORR). Herein, we reported on two kinds of Pt-Co electrocatalysts, PtCo ordered intermetallic and PtCo₂ disordered alloys, supported on bimetallic MOF-derived N-doped carbon. The synergistic interaction between Pt-Co nanoparticles and Co-N-C enhanced the overall ORR activity and maintained the integrity of both structures and their electrochemical properties during long-term stability testing. The optimal activity for both PtCo and PtCo₂ occurred after 20 000 potential cycles. The enhanced performance of PtCo was ascribed to the formation of a two-atomic-layer Pt-rich shell and the lattice strain caused by the core-shell PtCo@Pt structure. The increased activity of PtCo₂ was ascribed to the formation of large, spongy, and small solid nanoparticles during electrochemical dealloying and thus the exposure of more Pt sites on the surface. The strategy described herein advances our understanding of the structure-activity relationship in electrocatalysis and sheds light on the future development of more active and durable ORR electrocatalysts.

Random alloy and intermetallic nanocatalysts in fuel cell reactions

Fuel cells that use small organic molecules or hydrogen as the anode fuel can power clean electric vehicles. From an experimental perspective, the possible fuel cells' electrocatalytic reaction mechanisms are obtained through in situ electrochemical spectroscopy techniques and density functional theory calculations, providing theoretical guidance for further development of novel nanocatalysts. As advanced nanocatalysts for fuel cells' electrochemical reactions, alloy nanomaterials have greatly improved electrocatalytic activity and stability and have attracted widespread attention. Enhanced electrocatalytic performance of alloy nanocatalysts could be closely related to the synergistic effects, such as electronic and strain effects. Depending on the arrangement of atoms, alloys can be classified into random alloy and intermetallic compounds (ordered structure). Intermetallic compounds generally have lower heats of formation and stronger heteroatomic bonding strength relative to the random alloy, resulting in high chemical and structural stability in either full pH solutions or electrochemical tests. Here, we summarize the latest advances and the structure-function relationship of noble metal alloy nanocatalysts, among which Pt-based catalysts are the main ones, as well as comprehensively understand why they significantly affect the electrocatalytic performance of fuel cells. Novel alloy nanocatalysts with a robust three-phase interface to achieve efficient charge and mass transfer can obtain desirable activity and stability in the electrochemical workstation tests, and is expected to acquire a higher power density on fuel cell test systems with harsh test conditions.

Intermetallic compounds in catalysis - a versatile class of materials meets interesting challenges

The large and vivid field of intermetallic compounds in catalysis is reviewed to identify necessities, strategies and new developments making use of the advantageous catalytic properties of intermetallic compounds. Since recent reviews summarizing contributions in heterogeneous catalysis as well as electrocatalysis are available, this contribution is not aiming at a comprehensive literature review. To introduce the field, first the interesting nature of intermetallic compounds is elaborated - including possibilities as well as requirements to address catalytic questions. Subsequently, this review focuses on exciting developments and example success stories of intermetallic compounds in catalysis. Since many of these are based on recent advances in synthesis, a short overview of synthesis and characterisation is included. Thus, this contribution aims to be an introduction to the newcomer as well as being helpful to the experienced researcher by summarising the different approaches. Selected examples from literature are chosen to illustrate the versatility of intermetallic compounds in heterogeneous catalysis where the emphasis is on developments since the last comprehensive review in the field.