Direct Laser Patterning and Phase Transformation of 2D PdSe2 Films for On-Demand Device Fabrication

Strain-Assisted Phase Transformation in Two-Dimensional Transition-Metal Dichalcogenides

Two-dimensional polymorphic transition-metal dichalcogenides have drawn attention for their diverse applications. This work explores the complex interplay between strain-induced phase transformation and crack growth behavior in annealed nanocrystalline MoS2. Employing molecular dynamics (MD) simulations, this research focuses on the effect of grain size, misorientation, and annealing on phase evolution and their effects on the mechanical behavior of MoS2. First, examining phase transformation in monocrystalline MoS2 under various stress states reveals distinct behaviors depending on the initial phase (1T or 2H) and crystallographic orientation with respect to loading directions. Notably, transformation from a layered hexagonal to a body-centered tetragonal structure is more noticeable when strain in a zigzag direction is applied to the 1T sample. As such, single crystalline MoS2 with a 1T phase exhibits a 16% lower fracture stress in the armchair direction compared to that with a 2H phase. On the other hand, the 1T phase shows a 5% higher phonon lifetime compared to the 2H phase with similar phonon group velocities. Next, the influence of thermal energy and mechanical stress on the phase transformation of nanocrystalline MoS2 is investigated through annealing and quenching cycles, uncovering 60 and 44% irreversibility of phase transformation for an average grain size of 3 and 11 nm, respectively. Besides, the evolution of nanocrystalline samples with different initial phases and grain sizes is studied under uniaxial and biaxial stress. This study shows an inverse pseudo-Hall-Petch effect with exponents of 0.11 and 0.09 for 2H and 1T, respectively. The study reveals that phase transformation can occur concurrently with crack initiation and propagation with the 1T phase exhibiting a 19% lower grain size sensitivity of fracture stress compared to the 2H phase.

Phase Engineering of 2D Materials

Polymorphic 2D materials allow structural and electronic phase engineering, which can be used to realize energy-efficient, cost-effective, and scalable device applications. The phase engineering covers not only conventional structural and metal-insulator transitions but also magnetic states, strongly correlated band structures, and topological phases in rich 2D materials. The methods used for the local phase engineering of 2D materials include various optical, geometrical, and chemical processes as well as traditional thermodynamic approaches. In this Review, we survey the precise manipulation of local phases and phase patterning of 2D materials, particularly with ideal and versatile phase interfaces for electronic and energy device applications. Polymorphic 2D materials and diverse quantum materials with their layered, vertical, and lateral geometries are discussed with an emphasis on the role and use of their phase interfaces. Various phase interfaces have demonstrated superior and unique performance in electronic and energy devices. The phase patterning leads to novel homo- and heterojunction structures of 2D materials with low-dimensional phase boundaries, which highlights their potential for technological breakthroughs in future electronic, quantum, and energy devices. Accordingly, we encourage researchers to investigate and exploit phase patterning in emerging 2D materials.

Three-dimensional patterning of MoS2 with ultrafast laser

Transition metal chalcogenides, a special two-dimensional (2D) material emerged in recent years, possess unique optoelectronic properties and have been used to fabricate various optoelectronic devices. While it is essential to manufacture multifunctional devices with complex nanostructures for practical applications, 2D material devices present a tendency toward miniaturization. However, the controllable fabrication of complex nanostructures on 2D materials remains a challenge. Herein, we propose a method to create designed three-dimensional (3D) patterns on the MoS2 surface by modulating the interaction between an ultrafast laser and MoS2. Three different nanostructures, including flat, bulge, and craters, can be fabricated through laser-induced surface morphology transformation, which is related to thermal diffusion, oxidation, and ablation processes. The MoS2 field effect transistor is fabricated by ultrafast laser excitation which exhibits enhanced electrical properties. This study provides a promising strategy for 3D pattern fabrication, which is helpful for the development of multifunctional microdevices.

Ultrathin All-2D Lateral Diodes Using Top and Bottom Contacted Laterally Spaced Graphene Electrodes to WS2 Semiconductor Monolayers

The ultrathin nature of two-dimensional (2D) materials opens up opportunities for creating devices that are substantially thinner than using traditional bulk materials. In this article, monolayer 2D materials grown by the chemical vapor deposition method are used to fabricate ultrathin all-2D lateral diodes. We show that placing graphene electrodes below and above the WS₂ monolayer, instead of the same side, results in a lateral device with two different Schottky barrier heights. Due to the natural dielectric environment, the bottom graphene layer is wedged between the WS₂ and the SiO₂ substrate, which has a different doping level than the top graphene layer that is in contact with WS₂ and air. The lateral separation of these two graphene electrodes results in a lateral metal-semiconductor-metal junction with two asymmetric barriers but yet retains its ultrathin form of two-layer thickness. The rectification and diode behavior can be exploited in transistors, photodiodes, and light-emitting devices. We show that the device exhibits a rectification ratio up to 90 under a laser power of 1.37 μW at a bias voltage of ±3 V. We demonstrate that both the back-gate voltage and laser illumination can tune the rectification behavior of the device. Furthermore, the device can generate strong red electroluminescence in the WS₂ area across the two graphene electrodes under an average flowing current of 2.16 × 10^-5 A. This work contributes to the current understanding of the 2D metal-semiconductor heterojunction and offers an idea to obtain all-2D Schottky diodes by retaining the ultrathin device concept.

Research Process on Photodetectors based on Group-10 Transition Metal Dichalcogenides

Rapidly evolving group-10 transition metal dichalcogenides (TMDCs) offer remarkable electronic, optical, and mechanical properties, making them promising candidates for advanced optoelectronic applications. Compared to most TMDCs semiconductors, group-10-TMDCs possess unique structures, narrow bandgap, and influential physical properties that motivate the development of broadband photodetectors, specifically infrared photodetectors. This review presents the latest developments in the fabrication of broadband photodetectors based on conventional 2D TMDCs. It mainly focuses on the recent developments in group-10 TMDCs from the perspective of the lattice structure and synthesis techniques. Recent progress in group-10 TMDCs and their heterostructures with different dimensionality of materials-based broadband photodetectors is provided. Moreover, this review accounts for the latest applications of group-10 TMDCs in the fields of nanoelectronics and optoelectronics. Finally, conclusions and outlooks are summarized to provide perspectives for next-generation broadband photodetectors based on group-10 TMDCs.

Direct Laser Irradiation and Modification of 2D Te for Development of Volatile Memristor

Laser irradiation, as a kind of post-fabrication method for two-dimensional (2D) materials, is a promising way to tune the properties of materials and the performance of corresponding nano-devices. As the memristor has been regarded as an excellent candidate for in-memory devices in next-generation computing system, the application of laser irradiation in developing excellent memristor based on 2D materials should be explored deeply. Here, tellurene (Te) flakes are exposed to a 532 nm laser in the air atmosphere to investigate the evolutions of the surface morphology and atom structures under different irradiation parameters. Laser is capable of thinning the flakes, inducing amorphous structures, oxides and defects, and forming nanostructures by controlling the irradiation power and time. Furthermore, the laser-induced oxides and defects promote the migration of metal ions in Te, resulting in the formation of the conductive filaments, which provides the switching behavers of volatile memristor, opening a route to the development of next-generation nano-devices.

Recent Progress in Contact Engineering of Field-Effect Transistor Based on Two-Dimensional Materials

Two-dimensional (2D) semiconductors have been considered as promising candidates to fabricate ultimately scaled field-effect transistors (FETs), due to the atomically thin thickness and high carrier mobility. However, the performance of FETs based on 2D semiconductors has been limited by extrinsic factors, including high contact resistance, strong interfacial scattering, and unintentional doping. Among these challenges, contact resistance is a dominant issue, and important progress has been made in recent years. In this review, the Schottky-Mott model is introduced to show the ideal Schottky barrier, and we further discuss the contribution of the Fermi-level pinning effect to the high contact resistance in 2D semiconductor devices. In 2D FETs, Fermi-level pinning is attributed to the high-energy metal deposition process, which would damage the lattice of atomically thin 2D semiconductors and induce the pinning of the metal Fermi level. Then, two contact structures and the strategies to fabricate low-contact-resistance short-channel 2D FETs are introduced. Finally, our review provides practical guidelines for the realization of high-performance 2D-semiconductors-based FETs with low contact resistance and discusses the outlook of this field.

Enhanced Magnetism in Heterostructures with Transition-Metal Dichalcogenide Monolayers

Two-dimensional materials and their heterostructures have opened up new possibilities for magnetism at the nanoscale. In this study, we utilize first-principles simulations to investigate the structural, electronic, and magnetic properties of Fe/WSe₂/Pt systems containing pristine, defective, or doped WSe₂ monolayers. The proximity effects of the ferromagnetic Fe layer are studied by considering defective and vanadium-doped WSe₂ monolayers. All heterostructures are found to be ferromagnetic, and the insertion of the transition-metal dichalcogenide results in a redistribution of spin orientation and an increased density of magnetic atoms due to the magnetized WSe₂. There is an increase in the overall total density of states at the Fermi level due to WSe₂; however, the transition-metal dichalcogenide may lose its distinct semiconducting properties due to the stronger than van der Waals coupling. Spin-resolved electronic structure properties are linked to larger spin Seebeck coefficients found in heterostructures with WSe₂ monolayers.

Optical Modification of 2D Materials: Methods and Applications

2D materials are under extensive research due to their remarkable properties suitable for various optoelectronic, photonic, and biological applications, yet their conventional fabrication methods are typically harsh and cost-ineffective. Optical modification is demonstrated as an effective and scalable method for accurate and local in situ engineering and patterning of 2D materials in ambient conditions. This review focuses on the state of the art of optical modification of 2D materials and their applications. Perspectives for future developments in this field are also discussed, including novel laser tools, new optical modification strategies, and their emerging applications in quantum technologies and biotechnologies.

Fabrication Technologies for the On-Chip Integration of 2D Materials

With compact footprint, low energy consumption, high scalability, and mass producibility, chip-scale integrated devices are an indispensable part of modern technological change and development. Recent advances in 2D layered materials with their unique structures and distinctive properties have motivated their on-chip integration, yielding a variety of functional devices with superior performance and new features. To realize integrated devices incorporating 2D materials, it requires a diverse range of device fabrication techniques, which are of fundamental importance to achieve good performance and high reproducibility. This paper reviews the state-of-art fabrication techniques for the on-chip integration of 2D materials. First, an overview of the material properties and on-chip applications of 2D materials is provided. Second, different approaches used for integrating 2D materials on chips are comprehensively reviewed, which are categorized into material synthesis, on-chip transfer, film patterning, and property tuning/modification. Third, the methods for integrating 2D van der Waals heterostructures are also discussed and summarized. Finally, the current challenges and future perspectives are highlighted.

Understanding Heterogeneities in Quantum Materials

Quantum materials are usually heterogeneous, with structural defects, impurities, surfaces, edges, interfaces, and disorder. These heterogeneities are sometimes viewed as liabilities within conventional systems; however, their electronic and magnetic structures often define and affect the quantum phenomena such as coherence, interaction, entanglement, and topological effects in the host system. Therefore, a critical need is to understand the roles of heterogeneities in order to endow materials with new quantum functions for energy and quantum information science applications. In this article, several representative examples are reviewed on the recent progress in connecting the heterogeneities to the quantum behaviors of real materials. Specifically, three intertwined topic areas are assessed: i) Reveal the structural, electronic, magnetic, vibrational, and optical degrees of freedom of heterogeneities. ii) Understand the effect of heterogeneities on the behaviors of quantum states in host material systems. iii) Control heterogeneities for new quantum functions. This progress is achieved by establishing the atomistic-level structure-property relationships associated with heterogeneities in quantum materials. The understanding of the interactions between electronic, magnetic, photonic, and vibrational states of heterogeneities enables the design of new quantum materials, including topological matter and quantum light emitters based on heterogenous 2D materials.

Immobilized Precursor Particle Driven Growth of Centimeter-Sized MoTe2 Monolayer

Molybdenum ditelluride (MoTe₂) has attracted ever-growing attention in recent years due to its novel characteristics in spintronics and phase-engineering, and an efficient and convenient method to achieve large-area high-quality film is an essential step toward electronic applications. However, the growth of large-area monolayer MoTe₂ is challenging. Here, for the first time, we achieve the growth of a centimeter-sized monoclinic MoTe₂ monolayer and manifest the mechanism of immobilized precursor particle driven growth. Microscopic characterizations reveal an obvious trend of immobilized precursor particles being consumed by the monolayer and continuing to provide a source for the growth of the monolayer. Time-of-flight secondary ion mass spectrometry verifies the attachment of hydroxide ions on the surface of the MoTe₂ monolayer, thereby realizing the inhibition of crystal growth along the [001] zone axis and the continuous growth of the MoTe₂ monolayer. The first-principles DFT calculations prove the mechanism of immobilized precursor particles and the absorption of hydroxide ions on the MoTe₂ monolayer. The as-grown MoTe₂ monolayer exhibits a surface roughness of 0.19 nm and average conductivity of 1.5 × 10^-5 S/m, which prove the smoothness and uniformity of the MoTe₂ monolayer. Temperature-dependent electrical measurements together with the transfer characteristic curves further demonstrate the typical semimetallic properties of monoclinic MoTe₂. Our research elaborates the microscopic process of immobilized precursor particles to grow large-area MoTe₂ monolayer and provides a new thinking about the growth of many other two-dimensional materials.

Phase-Selective Synthesis of Ultrathin FeTe Nanoplates by Controllable Fe/Te Atom Ratio in the Growth Atmosphere

Phase controllable synthesis of 2D materials is of significance for tuning related electrical, optical, and magnetic properties. Herein, the phase-controllable synthesis of tetragonal and hexagonal FeTe nanoplates has been realized by a rational control of the Fe/Te ratio in a chemical vapor deposition system. Using density functional theory calculations, it has been revealed that with the change of the Fe/Te ratio, the formation energy of active clusters changes, causing the phase-controllable synthesis of FeTe nanoplates. The thickness of the obtained FeTe nanoplates can be tuned down to the 2D limit (2.8 nm for tetragonal and 1.4 nm for hexagonal FeTe). X-ray diffraction pattern, transmission electron microscopy, and high resolution scanning transmission electron microscope analyses exhibit the high crystallinity of the as-grown FeTe nanoplates. The two kinds of FeTe nanoflakes show metallic behavior and good electrical conductivity, featuring 8.44 × 10⁴ S m^-1 for 9.8 nm-thick tetragonal FeTe and 5.45 × 10⁴ S m^-1 for 7.6 nm-thick hexagonal FeTe. The study provides an efficient and convenient route for tailoring the phases of FeTe nanoplates, which benefits to study phase-sensitive properties, and may pave the way for the synthesis of other multiphase 2D nanosheets with controllable phases.

Applications of 2D-Layered Palladium Diselenide and Its van der Waals Heterostructures in Electronics and Optoelectronics

The rapid development of two-dimensional (2D) transition-metal dichalcogenides has been possible owing to their special structures and remarkable properties. In particular, palladium diselenide (PdSe₂) with a novel pentagonal structure and unique physical characteristics have recently attracted extensive research interest. Consequently, tremendous research progress has been achieved regarding the physics, chemistry, and electronics of PdSe₂. Accordingly, in this review, we recapitulate and summarize the most recent research on PdSe₂, including its structure, properties, synthesis, and applications. First, a mechanical exfoliation method to obtain PdSe₂ nanosheets is introduced, and large-area synthesis strategies are explained with respect to chemical vapor deposition and metal selenization. Next, the electronic and optoelectronic properties of PdSe₂ and related heterostructures, such as field-effect transistors, photodetectors, sensors, and thermoelectric devices, are discussed. Subsequently, the integration of systems into infrared image sensors on the basis of PdSe₂ van der Waals heterostructures is explored. Finally, future opportunities are highlighted to serve as a general guide for physicists, chemists, materials scientists, and engineers. Therefore, this comprehensive review may shed light on the research conducted by the 2D material community.

Shaping graphene with optical forging: from a single blister to complex 3D structures

Properties of graphene, such as electrical conduction and rigidity can be tuned by introducing local strain or defects into its lattice. We used optical forging, a direct laser writing method, under an inert gas atmosphere, to produce complex 3D patterns of single layer graphene. We observed bulging of graphene out of the plane due to defect induced lattice expansion. By applying low peak fluences, we obtained a 3D-shaped graphene surface without either ablating it or deforming the underlying Si/SiO₂ substrate. We used micromachining theory to estimate the single-pulse modification threshold fluence of graphene, which was 8.3 mJ cm^-2, being an order of magnitude lower than the threshold for ablation. The control of exposure parameters allowed the preparation of blisters with various topographies. The optically forged structures were studied with atomic force microscopy and Raman spectroscopy. Optically forged blisters act as building blocks in the formation of more complex structures. We found a simple geometric rule that helps to predict the shape of complex patterns which are created by the overlapping multiple exposures. Optical forging enables writing of extended patterns with diffraction unlimited features, which makes this method promising in the production of nanodevices with locally induced surface modifications.

Phase Variations and Layer Epitaxy of 2D PdSe2 Grown on 2D Monolayers by Direct Selenization of Molecular Pd Precursors

Two-dimensional (2D) materials and van der Waals heterostructures with atomic-scale thickness provide enormous potential for advanced science and technology. However, insufficient knowledge of compatible synthesis impedes wafer-scale production. PdSe₂ and Pd₂Se₃ are two of the noble transition-metal chalcogenides with excellent physical properties that have recently emerged as promising materials for electronics, optoelectronics, catalyst, and sensors. This research presents a feasible approach to synthesize PdSe₂ and Pd₂Se₃ with inherently asymmetric structure on honeycomb lattice 2D monolayer substrates of graphene and MoS₂. We directly deposit a molecular transition-metal precursor complex on the surface of the 2D substrates, followed by low-temperature selenization by chemical vapor flow. Parameter control leads to tuning of the material from monolayer nanocrystals with Pd₂Se₃ phase, to continuous few-layer PdSe₂ films. Annular dark-field scanning transmission electron microscopy (ADF-STEM) reveals the structure, phase variations, and heteroepitaxy at the atomic level. PdSe₂ with unconventional interlayer stacking shifts appeared as the kinetic product, whereas the bilayer PdSe₂ and monolayer Pd₂Se₃ are the thermodynamic product. The epitaxial alignment of interlayer rotation and translation between the PdSe₂ and underlying 2D substrate was also revealed by ADF-STEM. These results offer both nanoscale and atomic-level insights into direct growth of van der Waals heterostructures, as well as an innovative method for 2D synthesis by predetermined nucleation.

Semiconducting few-layer PdSe2 and Pd2Se3: native point defects and contacts with native metallic Pd17Se15

PdSe2 is a unique layered two-dimensional (2D) material with pentagonal structural motif and anisotropic properties. In addition, its strong interlayer interaction leads to new 2D form of the exfoliated monolayer, that is, Pd2Se3. Despite the increasing interest in these emerging 2D materials, the landscape of the native point defects, as a fundamental materials property, has not been revealed. In this work, we systematically investigate different types of defects in mono- and bi-layer PdSe2 and monolayer Pd2Se3. In contrast to the common expectation, Se vacancy is not the readily formed defect. Instead, Se-excess defects, such as SePd antisite and Se interstitial, are more likely to form over a majority of the allowed range of the atomic chemical potentials. Se-deficiency defect, Pd interstitial, is able to form under the Se-poor condition in bilayer PdSe2. The defect-mediated interlayer fusion model in the formation of monolayer Pd2Se3 from bilayer PdSe2 is reformulated. These dominant defects are found to stay in the neutral charge state, partly explaining the ambipolar behavior of the PdSe2 transistors. Finally, the stacked and lateral contacts between these few-layer semiconductors and the native Pd17Se15 metal are also studied. All these interfaces show p-type contact properties. This work reveals the important materials properties of few-layer PdSe2 and Pd2Se3 for the better development of new functional devices.