Preparation of a Copper Polyphosphate Kinase Hybrid Nanoflower and Its Application in ADP Regeneration from AMP

Practical and Rapid Membrane-Based Biosensor for Phenol Using Copper/Calcium-Enzyme Hybrid Nanoflowers

Phenol, a pollutant frequently found in chemical industries effluents, is highly toxic even in low concentrations. This study reports a green, simple, and rapid method for qualitative phenol biosensing using horseradish peroxidase (HRP) hybrid nanoflowers made with copper (Cu²⁺-hNF) or calcium (Ca²⁺-hNF) ions. The enzyme was immobilized through protein-inorganic self-assembly into hybrid structures and subsequently supported onto a polyvinylidene fluoride (PVDF) membrane. SEM, EDS, FTIR, and XRD techniques sustained the effective enzyme encapsulation into hybrid structures. The protein concentration in the structures was 0.25 mg.mL^-1 for both ions. The best temperature and pH were 60 °C and 7.4, respectively, for both hybrids and the free enzyme, suggesting that the immobilization did not affect the optimal conditions of the free HRP. Thermal stability from 25 to 70 °C and pH stability from 4.0 to 9.0 of the hybrids were also determined. Finally, using copper and calcium hybrids, both biosensors produced onto a PVDF membrane could detect phenol in concentrations ranging from 0.72 to 24.00 µmol.mL^-1 in 1 min. In contrast, control biosensors produced with free enzyme have not presented a visible color change in the same conditions. The findings suggest a promising application of the developed biosensors in functional phenol detection.

Bioinspired self-cleaning surface with microflower-like structures constructed by electrochemically corrosion mediated self-assembly

Developing facile and low-cost methods for the fabrication of bioinspired self-cleaning surfaces is of significant importance but still very challenging. In this work, we present a simple facile and low-cost...

Keratin-inorganic hybrid nanoflowers decorated with Fe3O4 nanoparticles as enzyme mimics for colorimetric detection of glucose

Fe₃O₄ magnetic nanoparticles (MNPs) are highly active enzyme-like catalysts. However, low stability is still a big challenge for Fe₃O₄-based enzyme mimics because the Fe₃O₄ MNPs can be easily dissolved when exposed to acidic conditions. Inspired by the numerous catalytic sites of a flower-like structure and the biological functions of amino acids in structural proteins, herein, by employing keratin as a protein component, stable Fe₃O₄-based MNP embedded keratin-Cu₃(PO₄)₂ nanoflowers were constructed, from which hierarchical nanostructures with a three-dimensional petal-like morphology were selected for subsequent studies owing to their excellent enzymic catalytic activity. The keratin-nanoflower@Fe₃O₄ exhibited significantly enhanced catalytic activity compared with that of keratin-Cu₃(PO₄)₂ nanoflowers and individual Fe₃O₄ MNPs. Remarkably, keratin-nanoflower@Fe₃O₄ exhibited superior long-term stability to Fe₃O₄ MNPs under more acidic conditions and favorable reusability. This method has been successfully exploited for the colorimetric determination of glucose in human serum with satisfactory sensitivity and specificity, offering a novel approach for glucose detection.

Immobilized enzymes in inorganic hybrid nanoflowers for biocatalytic and biosensing applications

Enzyme immobilization has been accepted as a powerful technique to solve the drawbacks of free enzymes such as limited activity, stability and recyclability under harsh conditions. Different from the conventional immobilization methods, enzyme immobilization in inorganic hybrid nanoflowers was executed in a biomimetic mineralization manner with the advantages of mild reaction conditions, and thus it was beneficial to obtain ideal biocatalysts with superior characteristics. The key factors influencing the formation of enzyme-based inorganic hybrid nanoflowers were elucidated to obtain a deeper insight into the mechanism for achieving unique morphology and improved properties of immobilized enzymes. To date, immobilized enzymes in inorganic hybrid nanoflowers have been successfully applied in biocatalysis for preparing medical intermediates, biodiesel and biomedical polymers, and solving the environmental or food industrial issues such as the degradation of toxic dyes, pollutants and allergenic proteins. Moreover, they could be used in the development of various biosensors, which provide a promising platform to detect toxic substances in the environment or biomarkers associated with various diseases. We hope that this review will promote the fundamental research and wide applications of immobilized enzymes in inorganic hybrid nanoflowers for expanding biocatalysis and biosensing.

Understanding intricacies of bioinspired organic-inorganic hybrid nanoflowers: A quest to achieve enhanced biomolecules immobilization for biocatalytic, biosensing and bioremediation applications

The immobilization of biomolecules has been a subject of interest for scientists for a long time. The organic-inorganic hybrid nanoflowers are a new class of nanostructures that act as a host platform for the immobilization of such biomolecules. It provides better practical applicability to these functional biomolecules while also providing superior activity and reusability when catalysis is involved. These nanostructures have a versatile and straightforward synthesis process and also exhibit enzyme mimicking activity in many cases. However, this facile synthesis involves many intricacies that require in-depth analysis to fully attain its potential as an immobilization technique. A complete account of all the factors involving the synthesis process optimisation is essential to be studied to make it commercially viable. This paper explores all the different aspects of hybrid nanoflowers which sets them apart from the conventional immobilization techniques while also giving an overview of its wide range of applications in industries.

Contemporary Enzyme-Based Methods for Recombinant Proteins In Vitro Phosphorylation

Phosphorylation is a reversible, enzyme-controlled posttranslational process affecting approximately one-third of all proteins in eukaryotic cells at any given time. Any deviation in the degree and/or site of phosphorylation leads to an abnormal conformation of proteins, resulting in a decline or loss of their function. Knowledge of phosphorylation-related pathways is essential for understanding the understanding of the disease pathogenesis and for the design of new therapeutic strategies. Recent availability of various kinases at an affordable price differs in activity, specificity, and stability and provides the opportunity of studying and modulating this reaction in vitro. We can exploit this knowledge for other applications. There is an enormous potential to produce fully decorated and active recombinant proteins, either for biomedical or cosmetic applications. Closely related is the possibility to exploit current achievements and develop new safe and efficacious vaccines, drugs, and immunomodulators. In this review, we outlined the current enzyme-based possibilities for in vitro phosphorylation of peptides and recombinant proteins and the added value that immobilized kinases provide.

Facile synthesis of recyclable laccase-mineral hybrid complexes with enhanced activity and stability for biodegradation of Evans Blue dye

Two morphologies of laccase-mineral hybrid complexes, i.e., laccase-mineral hybrid nanoflowers (La-HNF) and nanopetals (La-HNP), were synthesized via biomineralization using Cu₃ (PO₄)₂·3H₂O as the mineral for Evans Blue (EB) dye biodegradation. XRD patterns and FT-IR spectra results revealed the successful immobilization of laccase via in-situ formed Cu₃(PO₄)₂·3H₂O crystals. Compared with free laccase, laccase-mineral hybrid complexes showed higher enzymatic activity due to the activation effect induced by copper ions of Cu₃(PO₄)₂·3H₂O, further, the improved kinetic parameters of laccase-mineral hybrid complexes could be ascribed to nanoscale-dispersed laccase molecules within hybrid complexes. For EB dye biodegradation, the reason why the biodegradation efficiency (94.9%) of La-HNF was higher than that (86.8%) of La-HNP could be synergistic effect of immobilized laccase within 3D hierarchical structure of La-HNF. In addition, the optimized biodegradation conditions (pH 4.6 and 40 °C) of La-HNF were obtained, moreover, 93.2% and 48.1% of EB dye were biodegraded by La-HNF after stored for 30 days and reused for 10 cycles, respectively, demonstrating La-HNF have good practicability.

Evaluating the activity and stability of sonochemically produced hemoglobin-copper hybrid nanoflowers against some metallic ions, organic solvents, and inhibitors

The disadvantage of the conventional protein-inorganic hybrid nanoflower production method is the long incubation period of the synthesis method. This period is not suitable for practical industrial use. Herein, protein-inorganic hybrid nanoflowers were synthesized using hemoglobin and copper ion by fast sonication method for 10 min. The synthesized nanoflowers were characterized via scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and Fouirer-transform infrared spectroscopy. The activity and stability of the nanoflowers in the presence of different metal ions, organic solvents, inhibitors, and storage conditions were also evaluated by comparing with free hemoglobin. According to obtained results, the optimum pH and temperatures of both hybrid nanoflower and free hemoglobin were pH 5 and 40 °C, respectively. At all pH levels, nanoflower was more stable than free protein and it was also more stable than the free hemoglobin at temperatures ranging between 50 °C and 80 °C. The free protein lost more than half of its activity in the presence of acetone, benzene, and N,N-dimethylformamide, while the hybrid nanoflower retained more than 70% of its activity for 2 h at 40 °C. The hybrid nanoflower activity was essentially increased in the presence of Ca²⁺, Zn²⁺, Fe²⁺, Cu²⁺ and Ni²⁺ (132%, 161%, 175%, 185% and 106%, respectively) at 5 mM concentration. The nanoflower retained more than 85% of its initial activity in the presence of all inhibitors. In addition, it retained all its activity for 3 days under different storage conditions, unlike free hemoglobin. The results demonstrated that new hybrid nanoflowers may be promising in different biotechnological applications such as catalytic biosensors and environmental or industrial catalytic processes.

Hydrogels as Emerging Materials for Cornea Wound Healing

Hydrogel biomaterials have many favorable characteristics including tuneable mechanical behavior, cytocompatibility, optical properties suitable for regeneration and restoration of the damaged cornea tissue. The cornea is a tissue susceptible to various injuries and traumas with a complicated healing cascade, in which conserving its transparency and integrity is critical. Accordingly, the hydrogels' known properties along with the stimulation of nerve and cell regeneration make them ideal scaffold for corneal tissue engineering. Hydrogels have been used extensively in clinical applications for the repair and replacement of diseased organs. The development and optimizing of novel hydrogels to repair/replace corneal injuries have been the main focus of researches within the last decade. This research aims to critically review in vitro, preclinical, as well as clinical trial studies related to corneal wound healing using hydrogels in the past 10 years, as this is considered as an emerging technology for corneal treatment. Several unique modifications of hydrogels with smart behaviors have undergone early phase clinical trials and showed promising outcomes. Financially, this considers a multibillion dollars industry and with huge interest from medical devices as well as pharmaceutical industries with several products may emerge within the next five years.

Enzyme-Loaded Flower-Shaped Nanomaterials: A Versatile Platform with Biosensing, Biocatalytic, and Environmental Promise

As a result of their unique structural and multifunctional characteristics, organic-inorganic hybrid nanoflowers (hNFs), a newly developed class of flower-like, well-structured and well-oriented materials has gained significant attention. The structural attributes along with the surface-engineered functional entities of hNFs, e.g., their size, shape, surface orientation, structural integrity, stability under reactive environments, enzyme stabilizing capability, and organic-inorganic ratio, all significantly contribute to and determine their applications. Although hNFs are still in their infancy and in the early stage of robust development, the recent hike in biotechnology at large and nanotechnology in particular is making hNFs a versatile platform for constructing enzyme-loaded/immobilized structures for different applications. For instance, detection- and sensing-based applications, environmental- and sustainability-based applications, and biocatalytic and biotransformation applications are of supreme interest. Considering the above points, herein we reviewed current advances in multifunctional hNFs, with particular emphasis on (1) critical factors, (2) different metal/non-metal-based synthesizing processes (i.e., (i) copper-based hNFs, (ii) calcium-based hNFs, (iii) manganese-based hNFs, (iv) zinc-based hNFs, (v) cobalt-based hNFs, (vi) iron-based hNFs, (vii) multi-metal-based hNFs, and (viii) non-metal-based hNFs), and (3) their applications. Moreover, the interfacial mechanism involved in hNF development is also discussed considering the following three critical points: (1) the combination of metal ions and organic matter, (2) petal formation, and (3) the generation of hNFs. In summary, the literature given herein could be used to engineer hNFs for multipurpose applications in the biosensing, biocatalysis, and other environmental sectors.

Protein morphology drives the structure and catalytic activity of bio-inorganic hybrids

Bio-hybrid materials have received a lot of attention in view of their bio-mimicking nature. One such biomimetic material with catalytic activity are the protein derived floral nanohybrid. Copper phosphate coordinated flakes can be curated to distinct floral morphology using proteins. Structurally two different proteins with similar size and with no known enzymatic activity are used to evaluate the role of protein structure and morphology, on the structure-activity relationship of the developed hybrid nanoflowers. Globular protein BSA and bacterial microcompartment domain protein PduBB' are selected. PduBB' because of self-assembling nature forms extended sheets, whereas BSA lacks specific assembly. The developed hybrid NFs differ in their morphology and also in their mimicry as a biological catalyst. The present investigation highlights the importance of the quaternary structure of proteins in tailoring the structure and function of the h-NFs. The results in this manuscript will motivate and guide designing, engineering and selection of glue material for fabricating biomacromolecule derived biohybrid material to mimic natural enzymes of potential industrial application.