Study of Humic Acid Adsorption Character on Natural Maifan Stone: Characterization, Kinetics, Adsorption Isotherm, and Thermodynamics

The elemental variance between the "rice" and "non-rice" portions of Maifanitum and its health risk assessment

BACKGROUND

Maifanitum, a mineral used in Chinese medicine, was first documented during the Song Dynasty (960-1279). Historical records suggest its multifaceted therapeutic properties, including detoxification and stasis resolution, necrosis removal and tissue regeneration, diuretic and calculi dissolution and prolonging life. The concentration of elements in Maifanitum may vary depending on its origin, different parts, which can affect its effectiveness in different fields of applications. Therefore, the analysis of elements in Maifanitum and the subsequent health risk assessment have been conducted. This provides an important basis for the quality control and application safety of Maifanitum.

METHOD

The analytical techniques employed in this study are inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES), utilized for the quantitative assessment of 60 elements (Refer to Appendix 1) within Maifanitum samples. Based on the test results, chemometric methods are employed to evaluate the characteristics and differences in elemental concentration from different sources and locations. Additionally, a preliminary health risk assessment is conducted for Maifanitum from different origins and various parts.

RESULTS

We have established a fingerprint of the elements within Maifanitum, demonstrating a commendable level of similarity. The findings from hierarchical cluster analysis（HCA） corroborated with those from principal component analysis (PCA), collectively unveiling a systematic profile of elemental disparities between Maifanitum samples of diverse origins and applications. It also revealed that there are differences in the concentration of Al, Ga, Be, Hf, Na, Sn, Ti, Zr, Gd, Tb, Sr, Pb, Ce, Ba and other elements in different parts of Maifanitum. While Cd, As, and Cu levels in all samples were within the permissible limits as defined by the Chinese Pharmacopeia, Pb concentrations in the majority of samples were found to surpass these standards, albeit slightly in the ''non-rice'' fraction. The assessment of both beneficial and deleterious elements indicates that the ''non-rice'' fraction of Maifanitum possesses superior quality attributes. Moreover, the overall concentration of rare earth elements in Maifanitum is substantially below the established lower threshold for daily human consumption, with no immediate evidence suggesting any adverse health risks.

CONCLUSION

This study provides a basis for the quality control and safety evaluation of Maifanitum in clinical use.

Soil application potential of post-sorbents produced by co-sorption of humic substances and nutrients from sludge anaerobic digestion reject water

This study introduces a novel soil conditioning approach using humic substances (HSs) and nutrients co-recovered from reject water from sewage sludge anaerobic digestion. For the first time, HSs and nutrients were simultaneously recovered through sorption on low-cost, environmentally inert materials: natural rock opoka (OP) and waste autoclaved aerated concrete (WAAC). This innovative application of OP and WAAC as carriers and delivery agents for soil-relevant substances offers potential for resource recovery and soil conditioning. Results indicate that the post-sorption opoka (PS-OP) and post-sorption waste autoclaved aerated concrete (PS-WAAC) effectively release retained HSs at 350-480 μg g⁻1 d⁻1, respectively. These materials also show potential as NPK fertilizers, releasing 280-430 μg g⁻1 d⁻1 N-NH₄⁺, 80-150 μg g⁻1 d⁻1 P-PO₄³⁻, and 270-350 μg g⁻1 d⁻1 K⁺. Additionally, PS-OP demonstrated promising fungicide properties, reducing P. diachenii growth by 31% at a concentration of 1 g L⁻1. A two-way ANOVA indicated that the effects of PS-OP and PS-WAAC on soil physicochemical and biological parameters varied with plant species. Both post-sorbents improved the quality of soil collected from sand mining area, increasing cation exchange capacity by 7%-85% and organic matter content by 10%-58%. They also enhanced the functional potential of soil microbial communities, increasing their metabolic activities by 23%-36% in soils sown with clover and by 33%-39% in soils sown with rapeseed. An opposite effect was observed in soils sown with sorghum, suggesting these amendments may not universally act as plant biostimulants. The effectiveness of these post-sorbents in enhancing plant growth varied depending on plant species and the mineral base of the post-sorbent. PS-OP increased the total length of clover and sorghum by 41% and 36%, and their fresh biomass by 82% and 80%, respectively. In turn, PS-WAAC increased the total length of clover and sorghum by 76% and 17%, and their fresh biomass by 29% and 15%, respectively. It was notably more effective than PS-OP for rapeseed. This study proposes a strategy to decrease reliance on non-renewable resources and costly sorbents while minimizing environmental impact. It shows that PS-OP and PS-WAAC can enhance soil quality, microbial activity, and plant growth. Given their origins, these amendments are recommended for soil remediation, particularly in degraded areas. Future research should focus on optimizing their application across various plant species to maximize effectiveness.

Dynamic Adsorption of Mn2+ from Acid Mine Drainage by Highly Active Immobilized Particles with Fe0/Fe2+ Enhanced SRB

Bioremediation of acid mine drainage (AMD) was often challenged by poor tolerance of sulfate-reducing bacteria (SRB) to heavy metals and low bioactivity. The highly active immobilized particles with Fe0/Fe2+ enhanced SRB (Fe0/2+-SRB) were prepared by the microorganism immobilization technique. Three dynamic columns were constructed to investigate the adsorption capacity of Fe0/2+-SRB for Mn2+ under varying adsorption layer heights, inflow velocity, and initial Mn2+ concentrations. The role of each matrix material in the immobilized particles was explored, the mechanism of AMD remediation by Fe0/2+-SRB was revealed, and the adaptability of Fe0/2+-SRB to AMD under various initial conditions was investigated. The results showed that the prepared Fe0/2+-SRB exhibited a well-developed surface pore structure. When the adsorption layer height was 200 mm, the influent flow rate was 5 × 10-5 m3/s, and the initial manganese ion concentration was 10 mg/L, the maximum dynamic adsorption capacities (qe) of Mn2+ for each dynamic column were 7.8430, 4.7627, and 8.7677 mg/g, respectively. Compared to dynamic columns 1# and 2#, dynamic column 3# showed the best performance in treating AMD, and the Thomas model effectively described the adsorption kinetics of Mn2+ by Fe0/2+-SRB(3#). Microstructural analysis indicated that chemical adsorption, ion exchange, dissimilation-reduction reaction, and surface complexation occurred between the various matrix materials in Fe0/2+-SRB(3#). Mn2+ was primarily removed in the form of metal sulfide (MnS), and Fe0/Fe2+ could promote the dissimilatory reduction of SO42- by SRB to form S2-. Fe0/2+-SRB(3#) was able to adapt to AMD with initial conditions of pH was 2~4, SO42- < 2500 mg/L, and Mn2+ < 20 mg/L. The research results provide new insights into the remediation of AMD, using a combined microbial-adsorption technology.

Adsorption of dyestuff by nano copper oxide coated alkali metakaoline geopolymer in monolith and powder forms: Kinetics, isotherms and microstructural analysis

To remove contaminants and pollutants from wastewater systems, adsorbents are widely used. Geopolymers offer a convenient alternative as adsorbents in the wastewater treatment system as they are low-cost, environmentally friendly, and safer. A new adsorbent material prepared by coating nano copper oxide on the surface of alkali-activated metakaolin showed a higher ability to remove methylene blue (MB) dye from wastewater, thus making them attractive in dye removal applications. First, nano copper oxide was prepared by sol gel method and metakaolin geopolymer was produced using sodium silicate solution having a Ms value of 1.1 (M). Afterwards, nano copper oxide (MC) was coated on the surface of the geopolymer. The ability of MB dye to bind to both pristine (M^p, MC^p) and powder forms (M^pr, MC^pr) of the geopolymer was evaluated. X-ray diffraction revealed that the halo found at 27.40°-31.077° (2θvalue) in both samples related to amorphous gel's composition and the major peaks of copper oxide in MC^pr were sited at a 2θ value of 35.45° and 38.88°.The dye removal efficiency can be inferred from the increased adsorption capacity of 11.9 mg/g (M^p) and 14.4 mg/g (MC^p) for the monolith form and 81.43 mg/g (M^pr) and 87.82 mg/g (MC^pr) for the powder form. The adsorption of reused active sites was 73% for M^pr and 83% for MC^pr up to the fifth cycle after regeneration by heat treatment at 400 °C. The models that best suited the adsorption data were pseudo-second-order and Freundlich isotherms, which indicated possible chemisorption with intra-particle diffusion. Furthermore, the binding energy is shifted to lower value in XPS spectra due to dye adsorption arising from electrostatic attraction. A higher electron density is formed due to interaction with an equal contribution of silanol Si-O-H and Si-O-Na/Cu(O1s). The adsorbents are effective over a wide pH range and their improved recycling capability increases their applications for a wide range of uses.

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Study of the preparation of Maifan stone and SRB immobilized particles and their effect on treatment of acid mine drainage

The problems of acid mine drainage (AMD) in coal mine acidic wastewaters arise from a range of sources, including severe pollution with heavy metals and SO₄²⁻ and difficulties during treatment. Based on the ability of Maifan stone to adsorb heavy metals and the dissimilatory reduction of SO₄²⁻ by sulfate-reducing bacteria (SRB), Maifan stone–sulfate-reducing bacterium-immobilized particles were prepared via immobilization techniques using Shandong Maifan stone as the experimental material. A single factor experiment was used to investigate the influences of the dosage of Maifan stone, the particle size of Maifan stone and the dosage of SRB on the pH improvement effect and the removal rates of SO₄²⁻, Fe²⁺ and Mn²⁺. The Box–Behnken response surface method was used to determine the optimal preparation conditions for the Maifan stone and SRB immobilized particles in accordance with the ion removal rate and pH improvement effect when dealing with AMD. The results show that: (1) the optimal preparation conditions for Maifan stone synergistic SRB immobilized particles are determined by single factor experiment: the dosage of Maifan stone is 5 g, the particle size of Maifan stone is 0.075–0.106 mm, and the dosage of SRB is 25 mL per 100 mL; the removal rates of SO₄²⁻, Fe²⁺ and Mn²⁺ from AMD by the Maifan stone and SRB immobilized particles prepared under these conditions were 92.22%, 95.41% and 86.05%, and the pH was increased from 4.08 to 7.45. (2) From the variance analysis of the response surface model, it can be seen that the model effectively predicts the SO₄²⁻ removal rate, Fe²⁺ removal rate, Mn²⁺ removal rate and pH change. (3) After further optimization using the response surface method, the optimal preparation conditions of Maifan stone and SRB immobilized particles are determined as follows: Maifan stone dosage is 5 g, Maifan stone particle size is 0.075–0.106 mm, and SRB dosage is 25 mL per 100 mL. Through experiments, the removal rates of SO₄²⁻, Fe²⁺ and Mn²⁺ from AMD by the Maifan stone and SRB immobilized particles prepared under these conditions were 92.12%, 95.93% and 87.14%, respectively, and the pH was increased from 4.08 to 7.49.

Based on the ability of Maifan stone to adsorb heavy metals and the dissimilatory reduction of SO₄²⁻ by sulfate-reducing bacteria (SRB), Maifan stone–sulfate-reducing bacterium-immobilized particles were prepared via immobilization techniques.

Investigating the role of the morphology of the Zn-Al LDH on the adsorption of humic acid from aqueous solutions

Flake Zn-Al layered double hydroxides (FLDHs) and microspheres of LDH (MLDHs) were fabricated with a simple hydrothermal method to investigate the role of the morphology of Zn-Al LDH for humic acid (HA) adsorption from synthetic solutions and natural water. The effect of process variables, i.e. contact time, initial concentration of HA, pH, and competitive ions on the adsorption was investigated. HA removal mechanism was also studied. The two adsorbents exhibited different adsorption behaviors for HA in the presence and absence of background ions, which may be highly correlated with the various adsorption mechanisms involved. Comparison of the HA removal capacity of these two adsorbents implies the superior adsorption capability of FLDH for removal of HA from synthetic solutions (9.5 mg/g), while the adsorption capacity of MLDH was higher for natural organic matters present in natural water samples containing co-existing ions (8.9 mg/g). The pseudo-second-order kinetics model and Longmuir isotherm model could adequately interpret the HA adsorption process for the studied adsorbents. Both LDHs exhibited good regeneration and recycling abilities.

Study on the co-effect of maifanite-based photocatalyst and humic acid in the photodegradation of organic pollutant

In this study, the co-effect of clay mineral-based photocatalyst and humic acid on the photodegradation of dye was revealed for the first time. The clay mineral-based photocatalyst, maifanite/g-C₃N₄, was prepared using the co-calcining method. The physical and chemical properties of the maifanite/g-C₃N₄ photocatalysts with various ratios were characterized by multiple characterization methods, including SEM, XPS, BET, UV-Vis, FTIR, contact angle, and XRD. The respective degradation experiment of humic acid and RhB was performed using maifanite/g-C₃N₄ photocatalysts. The degradation process of mixture solution of humic acid and RhB was measured using EEM and UV-vis. The result indicates that in the presence of humic acid, low ratio of maifanite/g-C₃N₄ inhibits the production of by-products derived from the interaction of humic acid and the degradation of RhB. However, high ratio of maifanite/g-C₃N₄ is not conducive to the degradation of RhB. The ratio of 1:3 for maifanite/g-C₃N₄ is optimal for the photodegradation of RhB in the presence of humic acid. This article provides a new perspective to develop the co-effect of clay mineral and humic acid in the photodegradation of organic pollutant.

Effect of hexavalent chromium on the environment and removal techniques: A review

Despite the importance of chromium (Cr) in most anthropogenic activities, the subsequent environmental adulteration is now a source of major concern. Cr occurs in numerous oxidation states, with the furthermost stable and frequently occur states being Cr(0), Cr(III) and Cr(VI). Cr(0) and Cr(III) are vital trace elements while Cr(VI) is dispensable and noxious to living organisms. Predominantly in plants, Cr at low concentrations of about 0.05-1 mg/L assist to boost growth as well as increase productivity. However, accumulation of Cr could represent a potential threat to living organisms. Cr absorption, displacement and accretion depend on its speciation, which also determines its toxicity which is often diverse. Indications of its toxicity include; reduction of seed germination, retardation of growth, reduction of yield, inhibition of enzymatic activities, weakening of photosynthesis, nutrient, oxidative disparities and genetic mutation in plants as well as several injurious diseases in animals and humans. In this study, we have presented a comprehensive review as well as an informative account of the influence of Cr on the environment drawn from researches carried out over the years following an analytical approach. Uniquely, this work presents a review of the effects and remediation of Cr from soil and wastewater drawn from several evidence and meta-data-based articles and other publications. Accordingly, the write-up is intended to appeal to the consciousness of the general public that the significance of Cr notwithstanding, its environmental toxicity should not be taken for granted.

Adsorption of Hg(II) in an Aqueous Solution by Activated Carbon Prepared from Rice Husk Using KOH Activation

With the development of industry, the discharge of wastewater containing mercury ions posed a serious threat to human health. Using biomass waste as an adsorbent to treat wastewater containing mercury ions was a better way due to its positive impacts on the environment and resource saving. In this research, activated carbon (AC) was prepared from rice husk (RH) by the KOH chemical activation method. The characterization results of scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), Fourier transform infrared (FTIR), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) showed that rice husk-activated carbon (RHAC) had good pore structure and oxygen-containing functional groups. The influences of contact time, initial concentration of Hg(II), adsorbent dosage, pH, and ionic strength on mercury ion removal were investigated. The Langmuir model was most suitable for the adsorption isotherm of RHAC, and its maximum adsorption capacity for Hg(II) was 55.87 mg/g. RHAC still had a high removal capacity for Hg(II) after five regeneration cycles. RHAC had excellent removal efficiency for mercury ion wastewater. At the same time, RH could be used as a nonpolluting and outstanding characteristic adsorbent material.

Novel cobalt-carbon@silica adsorbent

Recently, carbon nanostructures are of high importance due to their unique characteristics and interesting applications. Pyrolysis of anthracene with cobalt complex Co(2,2'-bipy)Cl2 (1), where (2,2'-bipy) is 2,2'-bipyridine, in the absence and presence of silica gave in high yield cobalt-carbon nanocomposite CoCNC (2) and CoCNC@SiO2 (3) at 600 °C and 850 °C, respectively. They were characterized using SEM, TEM, PXRD, Raman and XPS. (3) and (2) contain core-shell cobalt(0)/cobalt oxide-graphite with or without silica support. PXRD indicates that (2) contains crystalline hexagonal α-Co and cubic β-Co phases while (3) contains only cubic β-Co phase and silica. The structure of (2) is 3D hierarchical carbon architecture wrapping spherical and elliptical cobalt nanoparticles. (3) consists of graphitized structures around cobalt nanoparticles embedded in the silica matrix. XPS reveals that the nanocomposites contain oxygen functional groups that enhance uptake of cationic dyes. CoCNC@SiO2 (3) has higher capacity and thus is better adsorbent of Basic Violet 3 than CoCNC (2). The Langmuir adsorption capacity of (3) is 19.4 mg g-1 while column capacity is 12.55 mg g-1 at 25 °C. Freundlich isotherm and pseudo-second-order kinetic models fit well the adsorption data. Thermodynamics indicate that adsorption(3) is exothermic. Column regeneration was tested for three cycles and Yan et al. was found the best kinetic model.