A Molecularly Imprinted Fluorescence Sensor Based on the ZnO Quantum Dot Core-Shell Structure for High Selectivity and Photolysis Function of Methylene Blue

Molecularly Imprinted Polymer-Based Luminescent Chemosensors

Molecularly imprinted polymer (MIP)-based luminescent chemosensors combine the advantages of the highly specific molecular recognition of the imprinting sites and the high sensitivity with the luminescence detection. These advantages have drawn great attention during the past two decades. Luminescent molecularly imprinted polymers (luminescent MIPs) towards different targeted analytes are constructed with different strategies, such as the incorporation of luminescent functional monomers, physical entrapment, covalent attachment of luminescent signaling elements on the MIPs, and surface-imprinting polymerization on the luminescent nanomaterials. In this review, we will discuss the design strategies and sensing approaches of luminescent MIP-based chemosensors, as well as their selected applications in biosensing, bioimaging, food safety, and clinical diagnosis. The limitations and prospects for the future development of MIP-based luminescent chemosensors will also be discussed.

QCM-Based MgFe2O4@CaAlg Nanocomposite as a Fast Response Nanosensor for Real-Time Detection of Methylene Blue Dye

Methylene blue (MB) dye is a common colorant used in numerous industries, particularly the textile industry. When methylene blue is discharged into water bodies without being properly treated, it may seriously damage aquatic and human life. As a result, a variety of methods have been established to remove dyes from aqueous systems. Thanks to their distinguishing features e.g., rapid responsiveness, cost-effectiveness, potential selectivity, portability, and simplicity, the electrochemical methods provided promising techniques. Considering these aspects, a novel quartz crystal microbalance nanosensors based on green synthesized magnesium ferrite nanoparticles (QCM-Based MgFe₂O₄ NPs) and magnesium ferrite nanoparticles coated alginate hydrogel nanocomposite (QCM-Based MgFe₂O₄@CaAlg NCs) were designed for real-time detection of high concentrations of MB dye in the aqueous streams at different temperatures. The characterization results of MgFe₂O₄ NPs and MgFe₂O₄@CaAlg NCs showed that the MgFe₂O₄ NPs have synthesized in good crystallinity, spherical shape, and successfully coated by the alginate hydrogel. The performance of the designed QCM-Based MgFe₂O₄ NPs and MgFe₂O₄@CaAlg NCs nanosensors were examined by the QCM technique, where the developed nanosensors showed great potential for dealing with continuous feed, very small volumes, high concentrations of MB, and providing an instantaneous response. In addition, the alginate coating offered more significant attributes to MgFe₂O₄ NPs and enhanced the sensor work toward MB monitoring. The sensitivity of designed nanosensors was evaluated at different MB concentrations (100 mg/L, 400 mg/L, and 800 mg/L), and temperatures (25 °C, 35 °C, and 45 °C). Where a real-time detection of 400 mg/L MB was achieved using the developed sensing platforms at different temperatures within an effective time of about 5 min. The results revealed that increasing the temperature from 25 °C to 45 °C has improved the detection of MB using the MgFe₂O₄@CaAlg NCs nanosensor and the MgFe₂O₄@CaAlg NCs nanosensor exhibited high sensitivity for different MB concentrations with more efficiency than the MgFe₂O₄ NPs nanosensor.

Solar Heterogenous Photocatalytic Degradation of Methylthionine Chloride on a Flat Plate Reactor: Effect of pH and H2O2 Addition

Methylthionine chloride (MTC) is a compound with several applications both in the clinical and medical industries. Nevertheless, such compounds can become an environmental problem, as they are not properly treated by wastewater treatment plants. This objective of this work was to study MTC degradation in a flat plate reactor through solar photolysis and heterogeneous photocatalysis processes with TiO2 as a catalyst. In addition to the processes, three pH (3.5, 6.5, and 9) and the effect of H2O2 addition (no dose, 0.5, and 1 mM/L) were tested. The results show that acidic pH is the most appropriate for MTC degradation, which ranged between 56% and 68.7% for photolysis and between 76% and 86.7% in photocatalysis. The H2O2 addition resulted in lower degradation in all cases, leading the authors to conclude that the presence of peroxide actually hinders degradation in solar photolysis and photocatalysis processes. Statistical analysis showed that the constant rate reactions calculated for every process, under the same conditions of pH and H2O2 addition, are significantly different from one another, and the three factors considered for experimental design (process, pH, and H2O2) have a statistically significant effect on MTC degradation. The collector area per order confirmed higher efficiency for photocatalysis when compared to photolysis processes.

Nanomaterials-Based Biosensors for COVID-19 Detection-A Review

This review paper discusses the properties of nanomaterials, namely graphene, molybdenum disulfide, carbon nanotubes, and quantum dots for unique sensing applications. Based on the specific analyte to be detected and the functionalization techniques that are employed, some noteworthy sensors that have been developed are discussed. Further, biocompatible sensors fabricated from these materials capable of detecting specific chemical compounds are also highlighted for COVID-19 detection purposes, which can aid in efficient and reliable sensing as well as timely diagnosis.