Novel Quinoline-Based Thiazole Derivatives for Selective Detection of Fe3+, Fe2+, and Cu2+ Ions

Active Hydrogen Free, Z-Isomer Selective Isatin Derived "Turn on" Fluorescent Dual Anions Sensor

An efficient and anions fluorescence "on-off" sensor of 1-(prop-2-yn-1-yl)-3-(quinolin-3-ylimino)indolin-2-one (PQI) has been developed for the selective sensing of dual anions of F- and NO3- ions in aqueous medium. Active hydrogen and Lewis acidic binding sites free, Z- isomer of isatin based π-conjugated quinoline exhibited excellent sensing activity against F- and NO3- ions in UV light. The fluorescence turns on the process accomplished via the PET "on-off" mechanism. The interaction between probe molecule and anions is thought to be a non-covalent interaction of the low electron density covalently bonded N-methylene moiety of propargyl isatin (-N-CH2-) of probe molecule with F- ion and the terminal acidic proton of propargyl group of isatin (-C≡C-H) with NO3- ions. The modes of anions binding with PQI and plausible mechanisms are proposed by 1H and 13C NMR titrations. The selectivity of anions sensing may be offered by the bucked structure of the Z-isomer. The calculated association constant values for PQI and F- and NO3- are ions 2.5 × 104 M-1 and 2.2 × 103 M-1, respectively, indicating strong binding interaction between the PQI and anions. The association nature of anions and probes was analyzed by a Jobs plot and the finding indicates both F- and NO3- ions are in 1:1 complexation with PQI. The limit of detection (LOD) of the probe with F- and NO3- ions is calculated and is to be 6.91 × 10-7 M and 9.93 × 10-7 M, respectively. The proposed PQI fluorophore possesses a low limit of detection (LOD) for both F- and NO3- ions which is within the WHO prescribed detection limit.

Colorimetric detection of Fe2+ and Cr2O72- in environmental water samples based on dual-emitting RhB-embedded Zr-MOFs

Three dye-loaded tunable dual-emission colorimetric fluorescent probes RhB@UiO-66-Ph (R@U-P) were prepared by in-situ encapsulation method under solvothermal conditions. The resonance energy transfer between UiO-66-Ph and RhB made the dual emission of R@U-P easily tunable with the embedded dye content changing. The R@U-P composites achieved emission from purple light to red light, and served as probes to realize comparative detection of Fe3+, Fe2+ and Cr2O72- in water through colorimetric or quenching detection mode. Mechanism study indicates that the resonance energy transfer or electron transfer interactions between R@U-P composites and inorganic ions resulted in the relative changes of the two emission peaks and realized the selective detection of analytes. The preparation and application of R@U-P probes provide a promising strategy for the in-situ encapsulation dye to obtain two dual-emission composites for the comparative detection of Fe3+, Fe2+ and Cr2O72- in water samples.

Fast, Selective and Sensitive Fluorescence Detection of Levofloxacin, Fe3+ and Cu2+ Ions in 100% Aqueous Solution Via Their Reciprocal Recognition

The fluorescence detection of ions and pharmaceutical effluents by using organic chemosensors is a valuable surrogate to the currently existing expensive analytical methods. In this regard, the design of multi-functional chemosensors to recognize desirable guests is of utmost importance. In this study, we first show that levofloxacin (LVO) is able to use as a fluorescent chemosensor for the detection of biologically important Cu2+ (turn-off) and Fe3+ (turn-on) ions via independent signal outputs in 100% aqueous buffer solutions. Next, using the reciprocal recognition of LVO and Fe3+ provides a unique emission pattern for the detection of LVO. This approach exhibited a high specificity to LVO among various pharmaceutical samples, namely acetaminophen (AC), azithromycin (AZ), gemifloxacin (GEM) and ciprofloxacin (CIP) and also showed great anti-interference property in urine. The attractive features of this sensing system are availability, easy-to-use, high sensitivity (limit of detection = 18 nM for Cu2+, 22 nM for Fe3+ and 0.12 nM for LVO), rapid response (5 s) with an excellent selectivity.

Preparation of temperature-responsive nanomicelles with AIE property as fluorescence probe for detection of Fe3+ and Fe2

Temperature-responsive nanomicelles with aggregation induced emission (AIE) property were prepared by the host-guest complexation of ferrocene functionalized tetraphenyl (TPE-Fc) and β-cyclodextrin-poly (N-isopropylacrylamide) (β-CD-(PNIPAM)₇). The AIE chromophore TPE-Fc bound to the hydrophobic cavity of cyclodextrin serves as the core of micelles, and temperature sensitive PNIPAM serves as the shell to give the micelles good solubility. The size of the nanomicelles is about 100 nm. At the excitation wavelength of 340 nm, the strongest fluorescent emission peak was 421 nm. The introduction of cyclodextrin star polymer increased the fluorescence intensity of nanomicelles, thus improving the recognition of probe to Fe³⁺ and Fe²⁺. The fluorescent probe can quickly detect Fe³⁺ and Fe²⁺ in water within 5 min even in the presence of various interfering ions. The detection limits of Fe³⁺ and Fe²⁺ were 1.04 μM and 0.78 μM, respectively in the range of 10-90 μM. The formation of complex between the probe and Fe³⁺/Fe²⁺ was supported by Job's plot. The probe was successfully applied to the detection of Fe³⁺and Fe²⁺ in actual water sample with a good recovery. In addition, a possible sensing mechanism for the interaction of iron ions with amide bond groups of nanomicelles was proposed.

A highly selective silver ion optical chemosensor based on isoxazolyl-azo pyrimidine: synthesis, spectroscopy, DFT calculations and applications

In this work, an isoxazolyl-azo pyrimidine optical chemosensor (PICS) was efficiently synthesized and applied for naked-eye detection of Ag⁺ ions in solution. The chemical formula of the PICS was recognized by UV-vis, FTIR and NMR analyses. The detection ability of PICS toward various ions was assessed. The results revealed the excellent selectivity and sensitivity of the chemosensor PICS to Ag⁺ ions in aqueous DMSO solutions. The PICS displayed an obvious color change from yellow to dark red in the presence of silver ions. The PICS could efficiently detect Ag⁺ ions over a wide pH range of 6-11, which makes it suitable for detection of Ag⁺ under physiological conditions. PICS also binds Ag⁺ ions to form a 1 : 1 stoichiometry complex (PICS-Ag⁺), resulting in a bathochromic shift in the absorption maximum from 372 to 410 nm. The detection limit of the probe PICS towards Ag⁺ was calculated to be 1.78 μM. Furthermore, the probe PICS shows excellent detection performance in the solid state, and PICS-based test strips were fabricated and applied as efficient Ag⁺ test kits for detection of silver ions in water samples. In addition, the sensing mechanism of PICS-Ag⁺ was completely evaluated using the density functional theory (DFT) calculations. Results indicated that the calculated energy gap between the HOMO and LUMO (3.41 eV) of PICS-Ag is lower than that of the free PICS (3.57 eV). This suggests that a red shift occurred upon addition of the Ag⁺ ion to PICS.

A new and efficient diaminopyrimidine-based colorimetric and fluorescence chemosensor for the highly selective and sensitive detection of Cu2+ in aqueous media and living cells

In this paper, a new and effective diaminopyrimidine-based chemosensor (DAPCS) was developed for the highly selective and ultra-sensitive detection of Cu²⁺ ion in aqueous media and living cell. Characterization and structure determining of DAPCS was determined by UV-Vis, FTIR and NMR analyses. It is observed that DAPCS and Cu (II) forms a ligand to metal charge transfer (LMCT) complex which produces distinguishable red color. The results also indicate that the DAPCS easily interacts with Cu²⁺ ion to form a 1:1 stoichiometry complex (DAPCS -Cu²⁺), resulting in a bathochromic shift in absorption maximum (429 nm to 449 nm) and remarkable quenching fluorescence intensity at the wavelength of 501 nm in DMSO-H₂O solution. Furthermore, the detection limit of DAPCS towards Cu²⁺ was calculated to be 3.19 µM. Meanwhile, DAPCS was applied as fluorescent probe for detection of Cu²⁺ ions with the detection limit of 0.014 µM. The optimal pH range of probe DAPCS for quantitative analysis of Cu²⁺ ions was 9-11, which renders it suitable for detection of Cu²⁺ under physiological conditions. Additionally, the DAPCS could be applied to detect Cu²⁺ in real water samples and in HeLa cells, indicating the practical uses of DAPCS in real analyses.

Conjugated microporous organic polymer as fluorescent chemosensor for detection of Fe3+ and Fe2+ ions with high selectivity and sensitivity

A conjugated microporous organic polymer (TPA-Bp) comprised of triphenylamine (TPA) and 2,2'-bipyridine-5,5'-diformaldehyde (Bp) was prepared via the Schiff-base reaction under ambient conditions. TPA-Bp is an amorphous and microporous spherical nanoparticle with very high stability. TPA-Bp suspension in DMF displayed strong fluorescence emission and selective fluorescence quenching response towards Fe³⁺ and Fe²⁺ ions. The fluorescence intensity of TPA-Bp at 331 nm presents linear relationship with the concentrations of both Fe³⁺ and Fe²⁺ with low detection limits of 1.02 × 10^-5 M for Fe³⁺ and 5.37 × 10^-6 M for Fe²⁺. The results of X-ray photoelectron spectroscopy (XPS) and Fourier Transform infrared spectroscopy (FTIR) confirm the selective coordination of N atoms of pyridine unit with Fe ions. The fluorescence quenching of TPA-Bp upon the addition of Fe³⁺/Fe²⁺ ions can be attributed to the absorption competition quenching (ACQ) mechanism and the energy transfer between TPA-Bp and Fe³⁺/Fe²⁺ ions. This work demonstrates that the conjugated microporous polymers are promising candidates as luminescent sensor for detection of the special analytes in practical applications.

Highly stable branched cationic polymer-functionalized black phosphorus electrochemical sensor for fast and direct ultratrace detection of copper ion

Copper ions (Cu²⁺) is an indispensable trace element in the process of metabolism and intake of excessive Cu²⁺ may lead to fatal diseases such as Alzheimer's disease. It is highly demanding to develop a sensitive, selective and convenient method for Cu²⁺ detection. In this work, thin-layer structured polyethyleneimine (PEI) decorated black phosphorus (BP) nanocomposite is one-step synthesized for an electrochemical sensor toward direct detection of Cu²⁺. This sensor achieves a wide detection range of 0.25-177 μM, a low detection limit of 0.02 μM much below the Environmental Protection Agency (EPA) maximum contaminant levels for drinking water (20 μM for Cu²⁺), and much faster response (1.5 s response time) and simpler operation than the conventional tedious anodic stripping voltammetry, ranking one of the best among all reported Cu²⁺ sensor. The great sensing enhancement is mainly due to a synergistic effect of BP and PEI of the composite, of which the former offers the reactivity while the latter splits the thick BP to thin-layer structured PEI-BP composite for larger reaction area. Meanwhile, a flexible sensor has been successfully fabricated and applied in detecting of Cu²⁺ in real samples of river, confirming the application feasibility of PEI-BP sensor in water environment control.