Controllable Synthesis of Bimetallic Nanostructures Using Biogenic Reagents: A Green Perspective

Fabrication of chitosan nanocomposites loaded with biosynthetic metallic nanoparticles and their therapeutic investigation

The present research demonstrates the formation of zinc oxide nanoparticles facilitated by Cissus quadrangularis (CQ-ZnONPs) and subsequent synthesis of chitosan-conjugated nanocomposites (CQ-CS/ZnONCs) along with their biological assessment. The biosynthesized nanoparticles and nanocomposites were physicochemically characterized and therapeutically assessed for their antioxidant, antibacterial, and antidiabetic potential. The formation of CQ-ZnONPs and CQ-CS/ZnONCs was preliminarily validated by the change in color and subsequently by UV-visible spectroscopic analysis. The crystalline peaks associated with the CQ-ZnONPs in CQ-CS/ZnONCs were established by XRD analysis. Morphological evaluation of CQ-ZnONPs and CQ-CS/ZnONCs was carried out through FE-SEM and HRTEM studies. The particle size of the CQ-ZnONPs and CQ-CS/ZnONCs was 243.3 nm and 176.6 nm, with a PDI of 0.188 and 0.199, respectively. Nanoparticles and nanocomposites expressed Zeta potential of -15.7 mV and -16.2 mV, respectively. The CQ-ZnONPs and CQ-CS/ZnONCs showed good radical effectiveness with various in-vitro assays. The formulated nanoparticles and nanocomposites displayed significant antibacterial activity against the selected bacterial pathogens. CQ-CS/ZnONCs presented noteworthy α-amylase and α-glucosidase inhibitory effects compared to CQ-ZnONPs with IC50 of 73.66 ± 1.21 μg/mL and 87.59 ± 1.29 μg/mL, respectively. Moreover, the synthesized CQ-CS/ZnONCs demonstrated 98.92 ± 0.39% and 99.58 ± 0.16% wound contraction (at 7 and 14 mg, respectively), significantly (p < 0.05) higher than the standard and CQ-ZnONPs. Thus, the CQ-ZnONPs and CQ-CS/ZnONCs could effectively develop promising drug delivery systems to inhibit pathogens and chronic tissue repair.

Size controlled biosynthesis of silver nanoparticles using Ophiorrhiza mungos, Ophiorrhiza harrisiana and Ophiorrhiza rugosa aqueous leaf extract and their antimicrobial activity

In this work, the aqueous leaf extracts of three Ophiorrhiza genus species, namely Ophiorrhiza mungos (Om), Ophiorrhiza harrisiana (Oh) and Ophiorrhiza rugosa (Or), have been used as the reducing and capping agents to control the size of AgNPs, Om-AgNPs, Oh-AgNPs and Or-AgNPs, respectively and found to be an effective antimicrobial agent against a wide range of bacteria and fungi. The biosynthesized AgNPs were studied by UV-Visible spectrophotometer, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray, transmission electron microscopy (TEM) and Fourier transform infrared spectrometer (FTIR). The average particle sizes of Om-AgNPs, Oh-AgNPs and Or-AgNPs were measured as 17 nm, 22 nm and 26 nm, respectively, and observed to be spherical and face-centered cubic crystals. The antibacterial test of synthesized AgNPs was performed against Staphylococcus aureus, Bacillus cereus, Escherichia coli, and Vibrio cholerae where the maximum antibacterial activity was observed by reducing the nano-size and increasing the silver content of AgNPs. The antifungal effect of these three types of AgNPs on Penicillium notatum and Aspergillus niger was also evaluated and their growth with AgNPs concentrations of 450 μg/mL was inhibited up to 80-90% and 55-70%, respectively. The size-control synthesis of AgNPs using the Ophiorrhiza genus species is presented here for the first time where the synthesized AgNPs showed higher stability and antimicrobial activities. Therefore, this study might lead to synthesize AgNPs with different morphologies using plant extracts of the same genus but from different species and provide strong encouragement for future applications in treating infectious diseases.

Understanding the Stability of an Unprecedented Si-Be Bond within Quantum Confinement

As of today, the Si-Be bond remains underexplored in the literature, and therefore its anomalous behavior continues to be an unsolved puzzle to date. Therefore, the present study aims at evaluating the integrity of an unprecedented Si-Be bond within quantum confinement. To accomplish this, first-principles-based calculation are performed on Be-doped silicon clusters with atomic sizes 6, 7, and 10. Silicon clusters are sequentially doped with one, two, and three Be atoms, and their thermal response is registered in the temperature range of 200-1500 K, which discloses several research findings. During the course of the simulations, the clusters face various thermal events such as solid cluster phase, rapid structural metamorphosis, and fragmentation. Si-Be nanoalloy clusters are noted to be thermally stable at lower temperatures (200-700 K); however, they begins to disintegrate earlier at a temperature as low as 800 K. This lower stability is attributed to the weak nature of Si and Be heteroatomic interactions, which is corroborated from the structural and electronic property analysis of the doped clusters. In addition to this, the performance of Be-doped clusters at finite temperatures is also compared with the thermal response of two other popular systems, viz., C- and B-doped silicon clusters.

Recent progress in microwave-assisted preparations of 2D materials and catalysis applications

On the urgency of metal-free catalysts, two-dimensional materials (2DMs) have caused extensive researches because of distinctive optical and electronic properties. In the last decade, microwave methods have emerged in rapid and effective preparations of 2DMs for catalysis. Microwave heating offers several advantages namely direct, fast, selective heating and uniform reaction temperature compared to conventional heating methods, thus bringing about high-yield and high-purity products in minutes or even seconds. This review summarizes recent advances in microwave-assisted preparations of 2DMs-based catalysts and their state-of-the-art catalytic performances. Microwave heating mechanisms are briefly introduced mainly focusing on microwave-matter interactions, which can guide the choice of precursors, liquid media, substrates, auxiliaries and experiment parameters during microwave radiation. We especially provide a detailed insight into various microwave-assisted procedures, classified as exfoliation, synthesis, doping, modification and construction towards different 2DMs nanomaterials. We also discuss how microwave affects the synthetic composition and microstructure of 2DMs-based catalysts, thereby deeply influencing their optical and electronic properties and the catalytic performances. Finally, advantages, challenges and prospects of microwave-assisted approaches for 2DMs nanomaterials are summarized to inspire the effective and large-scale fabrication of novel 2DMs-based catalysts.

Ultrafine and well-dispersed Pd-Ni bimetallic catalyst stabilized by dendrimer-grafted magnetic graphene oxide for selective reduction of toxic nitroarenes under mild conditions

A facile and efficient strategy is introduced for growing a dendrimer structure on the surface of magnetic graphene oxide by using thiol-ene click reaction. The as-synthesized dendrimer-grafted magnetic graphene oxide was used as a suitable support for bimetallic Pd-Ni nanoparticles. The prepared nanocomposite was utilized for the reduction of toxic nitroarenes to aminoarenes by using sodium borohydride in aqueous medium at room temperature. Various nitroarenes with functional groups like nitrile, halogen, carbonyl, hydroxyl, acid, and heterocycles were converted to their corresponding anilines with good to excellent yields. The enhanced performance of the catalyst could be attributed to the synergistic effect between Ni and Pd which causes the reaction to proceed more efficiently. Moreover, the catalyst could be readily isolated from the reaction mixture by utilizing an external magnet and reused till 5th cycles with marginal loss of activity.

State of the Art on Green Route Synthesis of Gold/Silver Bimetallic Nanoparticles

Recently, bimetallic nanoparticles (BMNPs) blending the properties of two metals in one nanostructured system have generated enormous interest due to their potential applications in various fields including biosensing, imaging, nanomedicine, and catalysis. BMNPs have been developed later with respect to the monometallic nanoparticles (MNPs) and their physicochemical and biological properties have not yet been comprehensively explored. The manuscript aims at collecting the main design criteria used to synthetize BMNPs focusing on green route synthesis. The influence of experimental parameters such as temperature, time, reagent concentrations, capping agents on the particle growth and colloidal stability are examined. Finally, an overview of their nanotechnological applications and biological profile are presented.

Green synthesis of biocompatible core–shell (Au–Ag) and hybrid (Au–ZnO and Ag–ZnO) bimetallic nanoparticles and evaluation of their potential antibacterial, antidiabetic, antiglycation and anticancer activities

The fabrication of bimetallic nanoparticles (BNPs) using plant extracts is applauded since it is an environmentally and biologically safe method. In this research, Manilkara zapota leaf extract was utilized to bioreduce metal ions for the production of therapeutically important core–shell Au–Ag and hybrid (Au–ZnO and Ag–ZnO) BNPs. The phytochemical profiling of the leaf extract in terms of total phenolic and flavonoid content is attributed to its high free radical scavenging activity. FTIR data also supported the involvement of these phytochemicals (polyphenols, flavonoids, aromatic compounds and alkynes) in the synthesis of BNPs. Whereas, TEM and XRD showed the formation of small sized (16.57 nm) spherical shaped core–shell Au–Ag BNPs and ZnO nano-needles with spherical AuNPs (48.32 nm) and ZnO nano-rods with spherical AgNP (19.64 nm) hybrid BNPs. The biological activities of BNPs reinforced the fact that they show enhanced therapeutic efficacy as compared to their monometallic components. All BNPs showed comparable antibacterial activities as compared to standard tetracycline discs. While small sized Au–Ag BNPs were most effective in killing human hepato-cellular carcinoma cells (HepG2) in terms of lowest cell viability, highest intracellular ROS/RNS production, loss of mitochondrial membrane potential, induction of caspase-3 gene expression and enhanced caspase-3/7 activity. BNPs also effectively inhibited advanced glycation end products and carbohydrate digesting enzymes which can be used as a nano-medicine for aging and diabetes. The most important finding was the permissible biocompatibility of these BNPs towards brine shrimp larvae and human RBCs, which suggests their environmental and biological safety. This research study gives us insight into the promise of using a green route to synthesize commercially important BNPs with enhanced therapeutic efficacy as compared to conventional treatment options.

Graphical demonstartion of the Manikara zapota-mediated biosynthesis of Bimetallic nanoparticles (BNPs) and evalution of their biological activities.

Advances in photothermal nanomaterials for biomedical, environmental and energy applications

Materials that exhibit photothermal effect have attracted enormous research interests due to their ability to strongly absorb light and effectively transform it into heat for a wide range of applications in biomedical, environmental and energy related fields. The past decade has witnessed significant advances in the preparation of a variety of photothermal materials, mainly due to the emergence of many nano-enabled new materials, such as plasmonic metals, stoichiometric/non-stoichiometric semiconductors, and the newly emerging MXenes. These photothermal nanomaterials can be hybridized with other constituents to form functional hybrids or composites for achieving enhanced photothermal performance. In this review, we present the fundamental insight of inorganic photothermal materials, including their photothermal conversion mechanisms/properties as well as their potential applications in various fields. Emphasis is placed on strategic approaches for improving their light harvesting and photothermal conversion capabilities through engineering their nanostructured size, shape, composition, bandgap and so on. Lastly, the underlying challenges and perspectives for future development of photothermal nanomaterials are proposed.

Au@Ag Core@Shell Nanoparticles Synthesized with Rumex hymenosepalus as Antimicrobial Agent

In this work, we used a sequential method of synthesis for gold-silver bimetallic nanoparticles with core@shell structure (Au@AgNPs). Rumex hymenosepalus root extract (Rh), which presents high content in catechins and stilbenes, was used as reductor agent in nanoparticles synthesis. Size distribution obtained by Transmission Electron Microscopy (TEM) gives a mean diameter of 36 ± 11 nm for Au@AgNPs, 24 ± 4 nm for gold nanoparticles (AuNPs), and 13 ± 3 nm for silver nanoparticles (AgNPs). The geometrical shapes of NPs were principally quasi-spherical. The thickness of the silver shell over AuNPs is around 6 nm and covered by active biomolecules onto the surface. Nanoparticles characterization included high angle annular dark field images (HAADF) recorded with a scanning transmission electron microscope (STEM), Energy-Dispersive X-ray Spectroscopy (EDS), X-Ray Diffraction (XRD), UV-Vis Spectroscopy, Zeta Potential, and Dynamic Light Scattering (DLS). Fourier Transform Infrared Spectrometer (FTIR), and X-ray Photoelectron Spectroscopy (XPS) show that nanoparticles are stabilized by extract molecules. A growth kinetics study was performed using the Gompertz model for microorganisms exposed to nanomaterials. The results indicate that AgNPs and Au@AgNPs affect the lag phase and growth rate of Escherichia coli and Candida albicans in a dose-dependent manner, with a better response for Au@AgNPs.