Design of a Schiff Base Complex of Copper Coated on Epoxy-Modified Core-Shell MNPs as an Environmentally Friendly and Novel Catalyst for the One-Pot Synthesis of Various Chromene-Annulated Heterocycles

Mining for antifungal agents to inhibit biofilm formation of Candida albicans: A study on green synthesis, antibiofilm, cytotoxicity, and in silico ADME analysis of 2-amino-4H-pyran-3-carbonitrile derivatives

Candida albicans (C. albicans) biofilm infections are quite difficult to manage due to their resistance against conventional antifungal drugs. To address this issue, there is a desperate need for new therapeutic drugs. In the present study, a green and efficient protocol has been developed for the synthesis of 2-amino-4H-pyran-3-carbonitrile scaffolds 4a-i, 6a-j, and 8a-g by Knoevenagel-Michael-cyclocondensation reaction between aldehydes, malononitrile, and diverse enolizable C-H activated acidic compounds using guanidinium carbonate as a catalyst either under grinding conditions or by stirring at room temperature. This protocol is operationally simple, rapid, inexpensive, has easy workup and column-free purification. A further investigation of the synthesized compounds was conducted to examine their antifungal potential and their ability to inhibit the growth and development of biofilm-forming yeasts like fungus C. albicans. According to our findings, 4b, 4d, 4e, 6e, 6f, 6g, 6i, 8c, 8d, and 8g were found to be active and potential inhibitors for biofilm infection causing C. albicans. The inhibition of biofilm by active compounds were observed using field emission scanning electron microscopy (FESEM). Biofilm inhibiting compounds were also tested for in vitro toxicity by using 3T3-L1 cell line, and 4b, 6e, 6f, 6g, 6i, 8c, and 8d were found to be biocompatible. Furthermore, the in silico ADME descriptors revealed drug-like properties with no violation of Lipinski's rule of five. Hence, the result suggested that synthesized derivatives could serve as a useful aid in the development of novel antifungal compounds for the treatment of fungal infections and virulence in C. albicans.

Synthesis and Characterization of a Hercynite-Supported Copper(II) Complex Based on 1,10-Phenanthroline-5,6-dione and Acetylacetone Building Blocks and Its Catalytic Application in Annulation Reactions

In the present work, a novel Cu(II) complex containing 10-phenanthroline-5,6-dione (phen-dione) and acetylacetone (acac) was prepared via solid-phase synthesis on silica-modified hercynite magnetic nanoparticles (MNPs). The resulting structure underwent thorough structural analysis using diverse instrumental techniques. The catalytic potential of the synthesized Cu(II) complex was successfully demonstrated in the synthesis of 2-amino-3-cyano-4H-chromenes. This was accomplished via a one-pot, three-component condensation reaction involving lawsone, malononitrile, and aromatic aldehydes in ethanol under reflux conditions, leading to remarkably high yields and product purity. Several advantages stem from this investigation. Notably, the use of ethanol as a sustainable and environmentally friendly solvent highlights the ecoconscious approach of this research. Moreover, the reaction conditions were mild and the separation process was straightforward, resulting in reduced byproducts as well as time and cost savings. Furthermore, the catalyst's stability and reusability were studied under optimal conditions, revealing excellent reversibility for up to five cycles without any significant loss of activity. This excellent performance underscores the potential of the Cu(II) complex for sustainable catalytic applications.

Construction of a Dual-Functionalized Acid-Base Nanocatalyst via HEPES Buffer Functionalized on Fe3O4 as a Reusable Catalyst for Annulation Reactions

Herein, we present a highly efficient dual-functionalized acid-base nanocatalyst, denoted as Fe3O4@GLYMO-HEPES, featuring sulfuric acid and tertiary amines as its dual functional components. This catalyst is synthesized through the immobilization of 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) as the source of these functionalities onto magnetite (Fe3O4) using 3-glycidoxypropyltriethoxysilane (GLYMO) as a linker. Characterization studies confirm the integrity of the Fe3O4 core, with the GLYMO-HEPES coating exhibiting no phase changes. Furthermore, Fe3O4@GLYMO-HEPES nanoparticles demonstrate a uniform size distribution without aggregation. Notably, the catalyst exhibits remarkable stability up to 200 °C and possesses a saturation magnetization value of 31.5 emu/g, facilitating easy recovery via magnetic separation. These findings underscore the potential of Fe3O4@GLYMO-HEPES as a versatile and recyclable nanocatalyst for various applications. Its catalytic ability was evaluated in the synthesis of various pyrano[2,3-c]pyrazoles and 2-amino-3-cyano-4H-chromenes through a tandem Knorr-Knoevenagel-Michael-Thorpe-Ziegler-type heterocyclization mechanism, using different aldehydes. A wide range of fused heterocycles was synthesized having good to excellent yields. The process is cost-effective, safe, sustainable, and scalable, and the catalyst can be reused up to five times. The prepared catalyst was found to be highly stable and heterogeneous and showed good recyclability.

Functionalization of Magnetic UiO-66-NH2 with a Chiral Cu(l-proline)2 Complex as a Hybrid Asymmetric Catalyst for CO2 Conversion into Cyclic Carbonates

In this study, a chiral [Cu(l-proline)2] complex-modified Fe3O4@SiO2@UiO-66-NH2(Zr) metal-organic framework [Fe3O4@SiO2@UiO-66-NH-Cu(l-proline)2] via multifunctionalization strategies was designed and synthesized. One simple approach to chiralize an achiral MOF-structure that cannot be directly chiralized using a chiral secondary agent like 4-hydroxy-l-proline. Therefore, this chiral catalyst was synthesized with a simple and multistep method. Accordingly, Fe3O4@SiO2@UiO-66-NH2 has been synthesized via Fe3O4 modification with tetraethyl orthosilicate and subsequently with ZrCl4 and 2-aminoterephthalic acid. The presence of the silica layer helps to stabilize the Fe3O4 core, while the bonding between Zr4+ and the -OH groups in the silica layer promotes the development of Zr-MOFs on the Fe3O4 surface, and then the surfaces of the synthesized magnetic MOFs composite are functionalized with 1,2-dichloroethane and Cu(II) complex with 4-hydroxy-l-proline, [Cu(l-proline)2] to afford the magnetically chiral nanocatalyst. Multiple techniques were employed to characterize this magnetically chiral nanocatalyst such as Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectrometry (EDX), powder X-ray diffraction (PXRD), circular dichroism (CD), inductively coupled plasma (ICP), thermogravimetric analysis (TGA), vibrating-sample magnetometry (VSM), and Brunauer-Emmett-Teller (BET) analyses. Moreover, a magnetically chiral nanocatalyst shows the asymmetric CO2 fixation reaction under solvent-free conditions at 80 °C and in ethanol under reflux conditions with up to 99 and 98% ee, respectively. Furthermore, the reaction mechanism was illustrated concerning the total energy of the reactant, intermediates and product, and the structural parameters were analyzed.

Controlled Modification of Triaminoguanidine-Based μ3 Ligands in Multinuclear [VIVO]/[VVO2] Complexes and Their Catalytic Potential in the Synthesis of 2-Amino-3-cyano-4H-pyrans/4H-chromenes

Reaction of tris(2-hydroxybenzylidene)-triaminoguanidinium chloride (I·HCl) and tris(5-bromo-2-hydroxybenzylidene)-triaminoguanidinium chloride (II·HCl) with [VIVO(acac)2] (1:1 molar ratio) in refluxing methanol resulted in mononuclear [VIVO] complexes, [VIVO(H2L1')(MeOH)] (1) and [VIVO(H2L2')(MeOH)] (2), respectively, where I and II undergo intramolecular triazole ring formation. Aerial oxidation of 1 and 2 in MeOH in the presence of Cs2CO3 gave corresponding cis-[VVO2] complexes Cs[(VO2)(H2L1')] (3) and Cs[(VO2)(H2L2')] (4). However, reaction of an aerially oxidized methanolic solution of [VIVO(acac)2] with I·HCl and II·HCl in the presence of Cs2CO3 (in 1:1:1 molar ratio) gave mononuclear complexes Cs[(VO2)(H3L1)] (5) and Cs[(VO2)(H3L2)] (6) without intramolecular triazole ring formation. Similar anionic trinuclear complexes Cs2[(VO2)3(L1)] (7) and Cs2[(VO2)3(L2)] (8) were isolable upon increasing the amounts of the vanadium precursor and Cs2CO3 to 3 equiv to the reaction applied for 5 and 6. Keeping the reaction mixture of 1 in MeOH under air gave [VVO(H2L1')(OMe)] (9). Structures of 3, 7, 8, and 9 were confirmed by X-ray crystal structure study. A permanent porosity in the crystalline metal-organic framework of 7 confirmed by single-crystal X-ray investigation was further verified by the BET study. Along with a suitable reaction mechanism, these synthesized compounds were explored as effective catalysts for the synthesis of biomolecules 4H-pyran/4H-chromenes.

Schiff Base Complex of Copper Immobilized on Core-Shell Magnetic Nanoparticles Catalyzed One-Pot Syntheses of Polyhydroquinoline Derivatives under Mild Conditions Supported by a DFT Study

We synthesized a stable and reusable Schiff base complex of copper immobilized on core-shell magnetic nanoparticles [Cu(II)-SB/GPTMS@SiO2@Fe3O4] with simple, efficient, and available materials. A variety of characterization analyses including Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), thermogravimetric analysis (TGA), X-ray diffraction (XRD), vibrating-sample magnetometry (VSM), energy-dispersive X-ray spectrometry (EDX), and inductively coupled plasma (ICP) confirm that our synthesized nanocatalyst was obtained. The particle size distribution from the TEM image was obtained in the range of 42-55 nm. The existence of cupric species (Cu2+) in the catalyst was determined with XPS analysis and clearly indicated two peaks at 933.7 and 953.7 eV for Cu 2p3/2 and Cu 2p1/2, respectively. BET results showed that our catalyst synthesized with a mesoporous structure and with a specific area of 48.82 m2 g-1. After detailed characterization, the resulting nanocatalyst exhibited excellent catalytic performance for the explored catalytic reactions in the one-pot synthesis of polyhydroquinoline derivatives by the Hantzsch reaction of dimedone, ethyl acetoacetate, ammonium acetate, and various aldehydes under sustainable and mild conditions. The corresponding products 5a-l are achieved in yields of 88-97%. Additionally, density functional theory (DFT) calculations were carried out to investigate the electrostatic potential root (ESP), natural bond orbital (NBO), and molecular orbitals (MOs), drawing the reaction mechanism using the total energy of the reactant and product and the study of structural parameters.

Construction and characterization of a magnetic nanoparticle-supported Cu complex: a stable and active nanocatalyst for synthesis of heteroaryl-aryl and di-heteroaryl sulfides

Diaryl and di-heteroaryl sulfides exist in the structure of many drugs and important biological compounds, also these compounds are well-known in medicinal chemistry due to important biological and pharmaceutical activities. Therefore, the development of novel, ecofriendly and efficient catalytic systems for the preparation of diaryl and di-heteroaryl sulfides is a very attractive and important challenge in organic synthesis. In this attractive methodology, we wish to introduce Fe3O4-supported 3-amino-4-mercaptobenzoic acid copper complex (Fe3O4@AMBA-CuI) nanomaterials as a novel and efficient magnetically recoverable catalyst for the preparation of heteroaryl-aryl and di-heteroaryl sulfides with high yields through reaction of heteroaryl halides with aryl or heteroaryl boronic acids and S8 as the sulfur source under ecofriendly conditions. This catalytic system was very efficient and practical for a diverse range of heteroaryl substrates including benzothiazole, benzoxazole, benzimidazole, oxadiazole, benzofuran, and imidazo[1,2-a]pyridine, because the desired diaryl and di-heteroaryl sulfides were prepared with high yields. The reusability-experiments revealed that the Fe3O4@AMBA-CuI nanocatalyst can be magnetically separated and reused at least six times without a significant decrease in its catalytic activity. VSM and ICP-OES analyses confirmed that despite using the Fe3O4@AMBA-CuI nanocatalyst 6 times, the magnetic properties and stability of the catalyst were still maintained. Although all the obtained heteroaryl-aryl and di-heteroaryl sulfide products are known and previously reported, the synthesis of this number of heteroaryl-aryl and di-heteroaryl sulfides has never been reported by any previouse methods.

Recyclable mesalamine-functionalized magnetic nanoparticles (mesalamine/GPTMS@SiO2@Fe3O4) for tandem Knoevenagel-Michael cyclocondensation: grinding technique for the synthesis of biologically active 2-amino-4H-benzo[b]pyran derivatives

In the present study, mesalamine-functionalized on magnetic nanoparticles (mesalamine/GPTMS@SiO2@Fe3O4) is fabricated as an efficient and magnetically recoverable nanocatalyst. The as-prepared nanocatalyst was successfully synthesized in three steps using a convenient and low-cost method via modification of the surface of Fe3O4 nanoparticles with silica and GPTMS, respectively, to afford GPTMS@SiO2@Fe3O4. Finally, treatment with mesalamine as a powerful antioxidant generates the final nanocatalyst. Then, its structure was characterized by FT-IR, SEM, TEM, EDX, XRD, BET, VSM, and TGA techniques. The average size was found to be approximately 38 nm using TEM analysis and the average crystallite size was found to be approximately 27.02 nm using XRD analysis. In particular, the synthesized nanocatalyst exhibited strong thermal stability up to 400 °C and high magnetization properties. The activity of the synthesized nanocatalyst was evaluated in the tandem Knoevenagel-Michael cyclocondensation of various aromatic aldehydes, dimedone and malononitrile under a dry grinding method at room temperature to provide biologically active 2-amino-4H-benzo[b]pyran derivatives products in a short time with good yields. The presented procedure offers several advantages including gram-scale synthesis, good green chemistry metrics (GCM), easy fabrication of the catalyst, atom economy (AE), no use of column chromatography, and avoiding the generation of toxic materials. Furthermore, the nanocatalyst can be reused for 8 cycles with no loss of performance by using an external magnet.

An acid-based DES as a novel catalyst for the synthesis of pyranopyrimidines

Deep eutectic solvents have countless advantages over normal solvents, and in addition to complying with the principles of green chemistry, depending on their nature, they can also act as catalysts. The use of deep eutectic solvents as acid catalysts has several advantages such as non-toxicity, a catalytic effect similar to or higher than the acid itself, and the possibility of recovery and reuse without significant loss of activity. In this project, A novel deep eutectic solvent (MTPPBr-PCAT-DES) was prepared from a one-to-one mole ratio of methyltriphenyl-phosphonium bromide (MTPPBr) and 3,4-dihydroxybenzoic acid (PCAT = protocatechuic acid) and characterized by various techniques such as FT-IR, TGA/DTA, densitometer, eutectic point, 1H NMR, 13C NMR and 31P NMR. Then, it was used as a novel and capable catalyst for the synthesis of pyranopyrimidines from the multicomponent condensation reaction of barbituric acid, 4-hydroxycoumarin, and aromatic aldehydes in mild conditions, short reaction times, and high yields.

A copper(ii) complex containing pyridine-2-carbaldehyde and its direct binding onto ethylenediamine functionalized with Fe3O4@SiO2 nanoparticles for catalytic applications

In the present study, a copper(ii) complex containing a pyridine-2-carbaldehyde ligand and its direct binding onto ethylenediamine functionalized with Fe3O4@SiO2 nanoparticles [Cu(ii)-Schiff base-(CH2)3-SiO2@Fe3O4] as a heterogeneous magnetic nanocatalyst can be easily prepared using a multi-step method. Next, the structural and magnetic properties of the synthesized nanoparticles were identified using Fourier-transform infrared spectroscopy (FT-IR), inductively coupled plasma (ICP), vibrating-sample magnetometry (VSM), transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM), thermogravimetric analysis (TGA), PXRD (Powder X-ray diffraction), Brunauer-Emmett-Teller (BET), and energy-dispersive X-ray spectrometry (EDX) techniques. TEM images reveal that the average particle size distribution was found to be in the range of 45-55 nm with spherical shape. The PXRD analysis indicated that the crystallite size was found to be 35.2 nm. The synthesized nanocatalyst exhibited a very good catalytic ability in the synthesis reaction of pyran derivatives and 2-benzylidenemalononitrile derivatives. Product 2-amino-7,7-dimethyl-4-(4-nitrophenyl)-5-oxo-5,6,7,8-tetrahydrobenzo[b]pyran 4e was achieved in 97% yield with a TON of 129.3 and a TOF of 646.6 h-1 and product 2-(4-cyanobenzylidene)malononitrile 3j was achieved in 96% yield with a TON of 128 and a TOF of 984.6 h-1. In addition, the synthesized nanocatalyst was easily separated from the reaction mixture by a magnet and used 7 consecutive times without significant loss of catalytic activity. Also, leaching of copper metal from the synthesized nanocatalyst was very insignificant for this reaction.

Fe3O4@nano-almond shell@OSi(CH2)3/DABCO: a novel magnetic nanocatalyst for the synthesis of chromenes

In this work, we report the synthesis and characterization of Fe₃O₄@nano-almond shell@OSi(CH₂)₃/DABCO as a novel magnetic natural-based basic nanocatalyst. The characterization of this catalyst was achieved using different spectroscopy and microscopy techniques, such as Fourier-transform infrared spectroscopy, X-ray diffractometry, field-emission scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy and mapping, vibrating-sample magnetometry, Brunauer-Emmett-Teller measurements, and thermogravimetric analysis. This catalyst was used for the one-pot synthesis of 2-amino-4H-benzo[f]chromenes-3-carbonitrile from the multicomponent reaction of aldehyde and malononitrile with α-naphthol or β-naphthol under solvent-free conditions at 90 °C. The yields of the obtained chromenes are 80-98%. The attractive features of this process are its easy work-up, mild reaction conditions, reusability of the catalyst, short reaction times and excellent yields.

Picolylamine-Ni(ii) complex attached on 1,3,5-triazine-immobilized silica-coated Fe3O4 core/shell magnetic nanoparticles as an environmentally friendly and recyclable catalyst for the one-pot synthesis of substituted pyridine derivatives

In the current study, an environmentally friendly and facile method was proposed for designing and constructing a catalyst with Ni(ii) attached to a picolylamine complex on 1,3,5-triazine-immobilized Fe3O4 core-shell magnetic nanoparticles (NiII-picolylamine/TCT/APTES@SiO2@Fe3O4) via a stepwise procedure. The as-synthesized nanocatalyst was identified and characterized via Fourier-transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating-sample magnetometry (VSM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), field-emission scanning electron microscopy (FE-SEM), inductively coupled plasma (ICP), and energy-dispersive X-ray spectrometry (EDX). The obtained results from the BET analysis indicated that the synthesized nanocatalyst had high specific area (53.61 m2 g-1) and mesoporous structure. TEM observations confirmed the particle size distribution was in the range 23-33 nm. Moreover, the binding energy peaks observed at 855.8 and 864.9 eV in the XPS analysis confirmed the successful and stable attachment of Ni(ii) on the surface of the picolylamine/TCT/APTES@SiO2@Fe3O4. The as-fabricated catalyst was used to produce pyridine derivatives by the one-pot pseudo-four component reaction of malononitrile, thiophenol, and a variety of aldehyde derivatives under solvent-free conditions or EG at 80 °C. The highest yield achieved was 97% for compound 4d in EG at 80 °C with a TOF of 823 h-1 and TON of 107. It was found that the used catalyst was recyclable for eight consecutive cycles. On the basis of ICP analysis, the results indicated that the Ni leaching was approximately 1%.

Trimesic acid-modified magnetic gum as a highly efficient and recyclable biocatalyst for the one-pot green synthesis of condensation reactions

In this work, a novel and efficient magnetic biocatalyst was designed, prepared and identified using cherry tree gum as a biopolymer functionalized with 1,3,5-benzenetricarboxylic acid (gum@Fe₃O₄@BTA). The obtained biocatalyst was prepared using available and cheap materials in an easy process. This biocatalyst was used as an efficient catalyst with high catalytic activity for the synthesis of a three-component one-pot protocol and four-component one-pot protocol of tetrahydro-4H-chromene derivatives and polyhydroquinoline derivatives in EtOH green solvent under reflux conditions, respectively. The synthesized heterogeneous biocatalysts were identified and analyzed by FT-IR, EDS, FESEM, TGA and XRD techniques. The synthesis of tetrahydro-4H-chromene and polyhydroquinoline derivatives by using this biocatalyst has advantages such as high efficiency, short reaction time, simple work method, absence of dangerous solvents, environmentally friendly conditions, easy separation of the biocatalyst by an external magnet, and the ability reuse for five periods without significant decrease in catalytic activity.

Metal Complexes with Schiff Bases: Data Collection and Recent Studies on Biological Activities

Metal complexes play a crucial role in pharmaceutical sciences owing to their wide and significant activities. Schiff bases (SBs) are multifaceted pharmacophores capable of forming chelating complexes with various metals in different oxidation states. Complexes with SBs are extensively studied for their numerous advantages, including low cost and simple synthetic strategies. They have been reported to possess a variety of biological activities, including antimicrobial, anticancer, antioxidant, antimalarial, analgesic, antiviral, antipyretic, and antidiabetic ones. This review summarizes the most recent studies on the antimicrobial and antiproliferative activities of SBs-metal complexes. Moreover, recent studies regarding mononuclear and binuclear complexes with SBs are described, including antioxidant, antidiabetic, antimalarial, antileishmanial, anti-Alzheimer, and catecholase activities.

Design and Preparation of Copper(II)-Mesalamine Complex Functionalized on Silica-Coated Magnetite Nanoparticles and Study of Its Catalytic Properties for Green and Multicomponent Synthesis of Highly Substituted 4H-Chromenes and Pyridines

In the present study, a green and ecofriendly nanocatalyst was synthesized through functionalization of 2,4,6-trichloro-1,3,5-triazine (TCT) and mesalamine on silica-coated magnetic nanoparticles (MNPs), then coordination with Cu²⁺ without agglomeration, consecutively. The silica-coated MNPs functionalized with the Cu(*II)-mesalamine complex was (Fe₃O₄@SiO₂@NH₂-TCT-mesalamine-Cu(II) MNPs) completely characterized by FT-IR, XRD, EDX, FESEM, TEM, VSM, TGA, and BET analyses. Afterward, the activity of the novel catalyst was investigated in the synthesis of chromene heterocycles, which were an important group of organic compounds. The activity of Fe₃O₄@SiO₂@NH₂-TCT-mesalamine-Cu(II) MNPs as a high-performance heterogeneous nanocatalyst was evaluated for the synthesis of 2-amino-4-aryl-6-(phenylthio)pyridine-3,5-dicarbonitriles and 2-amino-4H-chromenes via aromatic aldehydes, malononitrile, and enolizable C-H acids (resorcinol, 2-hydroxynaphthalene-1,4-dione, and benzenethiol) in ethanol under reflux conditions. Fe₃O₄@SiO₂-TCT-mesalamine-Cu(II) could be quickly separated using an external magnet and reused nine times without a remarkable reduction of its catalytic activity.

An efficient and green one-pot synthesis of tetrahydrobenzo[a]xanthenes, 1,8-dioxo-octahydroxanthenes and dibenzo[a,j]xanthenes by Fe3O4@Agar-Ag as nanocatalyst

Agar-coated Fe₃O₄ nanoparticles (Fe₃O₄@agar) were prepared simply through in situ co-precipitation of Fe²⁺ and Fe³⁺ ions via NH₄OH in an aqueous solution of Agar. Coating of Ag⁺ ions on the surface of the latter followed by mild reduction of Ag⁺ with NaBH₄ gives Fe₃O₄@Agar-Ag NPs. The magnetic Fe₃O₄@Agar-Ag nanocatalyst was characterized thoroughly by FT-IR, XRD, SEM, TEM, VSM, EDX, TGA, and ICP analyses. Its catalytic activity was assessed in the synthesis of 12-aryl-8,9,10,12-tetrahydrobenzo[a]xanthene-11-one, 14-aryl-14H-dibenzo[a,j]xanthenes, and 1,8-dioxo-octahydroxanthene derivatives through a one-pot condensation of dimedone, 2-naphthol, and aryl aldehydes in EtOH. This novel method represents lots of advantages compared to the previous researches, such as avoiding the toxic catalysts, easy method for isolation of the products, satisfying yields, totally clean conditions, and simplicity of the methodology. This catalytic system is attributed to an eco-friendly process, high catalytic activity, and facility of recovery using an external magnet. A novel and magnetically recyclable catalyst known as Fe3O4@Agar-Ag NPs as a heterogeneous catalyst were synthesized by a simple method. Using this facile, efficient, and eco-friendly Nanocomposite, for the different models of xanthene reaction was represented.

Magnetic Silica-Coated Picolylamine Copper Complex [Fe3O4@SiO2@GP/Picolylamine-Cu(II)]-Catalyzed Biginelli Annulation Reaction

An efficient and heterogeneous novel magnetic silica-coated picolylaminecopper complex [Fe₃O₄@SiO₂@GP/Picolylamine-Cu(II)] was synthesized, characterized, and employed as a magnetically recoverable nanocatalyst in Biginelli condensation for the preparation of biologically active 3,4-dihydropyrimidinones. Fe₃O₄@SiO₂@GP/Picolylamine-Cu(II) was synthesized easily using chemical attachment of the picolylaminecompound on Fe₃O₄@SiO₂@GP, followed by treatment with copper salt in ethanol under reflux conditions. Fe₃O₄@SiO₂@GP/Picolylamine-Cu(II) was affirmed by various analyses such as Fourier transform infrared, thermogravimetric analysis, X-ray diffraction, vibrating-sample magnetometry, field-emission scanning electron microscopy, transmission electron microscopy, DLS, inductively coupled plasma, energy-dispersive X-ray spectrometry, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller. The resulting catalyst system was successfully used in the Biginelli reaction through a variety of compounds such as aromatic aldehyde, urea, and ethyl acetoacetate under solvent-free conditions or ethylene glycol at 80 °C and yielded the desired products with high conversions with powerful reusability. The current approach was convenient and clean, and only 0.01 g of the catalyst could be used to perform the reaction. The easy work-up procedure, gram-scale synthesis, usage of nontoxic solvent, improved yield, short reaction times, and high durability of the catalyst are several remarkable advantages of the current approach. Also, the Fe₃O₄@SiO₂@GP/Picolylamine-Cu(II) nanocatalyst could be recycled by an external magnet for eight runs with only a significant loss in the product yields.