Polymer-Thread-Based Fully Textile Capacitive Sensor Embroidered on a Protective Face Mask for Humidity Detection

Microscale Humidity Sensor Based on Iron-Coated Elaters of Equisetum Spores

Humidity sensors deeply influence human manufacturing production and daily life, while researchers generally focus on developing humidity sensors with higher stability, higher linearity, rapid response time, etc. Yet, few people discuss measuring humidity in the microenvironment by miniaturizing sensor size into a microscale, in which the existing humidity sensors are difficult to reach. Accordingly, this study proposes a methodology for measuring relative humidity in the microscale by utilizing the distinctive morphologies of Equisetum spores across a range of relative humidities between 50% and 90%. Equisetum spores are responsive to changes in ambient relative humidity and remain in their original activities even after iron sputtering, which aims to endow the sensor with magnetic properties. The test performed in this study demonstrated a response time of 3.3 s and a recovery time of 3.6 s. In the first application, we employed such microscale sensors to work in the channel of the microfluidic chip or the cell migration microchip, as an example of working in the microenvironment. COMSOL Multiphysics 6.2 software was also used to simulate the change in relative humidity in such microchannels. Secondly, such microscale sensors are combined with smartphone-based microscopy to measure the humidity of the skin. These microscale sensors pave the new way to sensing humidity in microenvironments.

Textronic Solutions Used to Produce Layers Sensitive to Chemical Stimuli-Gas Sensors: A Review

Thanks to the intensive development of textronics, textronic applications are already visible in many areas of everyday life. Many researchers around the world have focused on the invention of textronic systems to increase security, create technological innovations and make everyday life easier and more interesting. Due to the wide use of chemical textile sensors, this review article lists scientific publications covering all types of wearable chemical sensors along with their latest developments. The latest developments from the last few years in moisture, pH, sweat and biomolecules sensors are described. In this review, greatest emphasis and detail was placed on textile gas sensors and their production methods. The use of, among others, graphene and zinc oxide grown on cotton fabric, colorimetric textiles based on halochromic dye, electronic graphene fabric based on lotus fibers and graphene oxide and zinc oxide nanorods were considered. Finally, this article summarizes our current knowledge on gas sensors, compares the detection properties of the presented projects and indicates future directions of development.

Numerical and Experimental Analysis of Mechanical Properties in Hybrid Epoxy-Basalt Composites Partially Reinforced with Cellulosic Fillers

The current work is focused on numerical and experimental studies of woven fabric composites modified by hybridisation with biological (cellulosic) filler materials. The mechanical performance of the composites is characterized under tensile, bending and impact loads and the effect of hybridisation is observed with respect to pure and nonhybrid composites. Numerical models are developed using computational tools to predict mechanical performance under tensile loading. The computational prediction results are compared and validated with relevant experimental results. This research is aimed at understanding the mechanical performance of basalt-epoxy composites partially reinforced with micro-/nano-sized bio-fillers from cellulose and intended for various application areas. Different weave structures, e.g., plain, twill, matt, etc., were investigated with respect to the mechanical properties of the hybrid composites. The effects of hybridizing with cellulose particles and different weave patterns of the basalt fabric are studied. In general, the use of high-strength fibres such as basalt along with cellulosic fillers representing up to 3% of the total weight improves the mechanical performance of the hybrid structures. The thermomechanical performance of the hybrid composites improved significantly by using basalt fabric as well as by addition of 3% weight of cellulosic fillers. Results reveal the advantages of hybridisation and the inclusion of natural cellulosic fillers in the hybrid composite structures. The material developed is suitable for high-end applications in components for construction that demand advanced mechanical and thermomechanical performance. Furthermore, the inclusion of biodegradable fillers fulfills the objectives of sustainable and ecological construction materials.

Hybrid Thermoplastic Composites from Basalt- and Kevlar-Woven Fabrics: Comparative Analysis of Mechanical and Thermomechanical Performance

Current research deals with thermoplastic polyamide (PA6)-based composites reinforced with basalt and Kevlar fabrics. Hybrid composites were developed by altering the stacking sequence of basalt and two kinds of Kevlar fabrics. Pure-basalt- and pure-Kevlar-based samples were also developed for comparison purposes. The developed samples were evaluated with respect to mechanical and thermomechanical properties. Mechanical tests, e.g., tensile, flexural, and impact strength, were conducted along with thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) to ascertain the load-bearing and high-temperature stability of the hybrid composite samples vis-à-vis pure-basalt- and Kevlar-based samples. Scanning electron microscopy (SEM) was carried out to study the nature of fracture and failure of the composite samples. The pure-basalt-based PA6 thermoplastic composites exhibited the best mechanical performance. Hybridization with basalt proved to be beneficial for improving the mechanical performance of the composites using Kevlar fabrics. However, a proper stacking sequence and density of Kevlar fabric has to be selected. The thermogravimetric analysis showed minimal weight loss for basalt-based composites. Furthermore, the thermal stability of the composites using Kevlar fabric was improved by hybridization with basalt fabric. The thermomechanical characteristics of hybrid composites may be altered by changing the stacking order of the reinforcements. Differential scanning calorimetry further established that the hybrid composites with alternate layers of basalt and Kevlar can improve the heat flow rate and enable survivability at extreme temperatures. Such novel hybrid composites can be used for high-load-bearing and high-temperature applications, e.g., defense, aerospace, automotives, and energy applications.

Development of Embroidery-Type Sensor Capable of Detecting Respiration Using the Capacitive Method

This study presents a respiration sensor that is dependent on a parallel capacitor, including connection lines and electrodes embroidered on textiles. First, characterizations of the respiration capacitor using a silver thread, including a combination of porous Eco-flex simulating air in the lungs due to respiration, were evaluated using an LCR meter. Second, the effects of air gaps on the detection of respiration motions according to the change in electrode distance under pressure were presented. The data values were measured from 1 to 300 kHz using an LCR meter and dielectric test fixture. Third, actual breathing was examined in four patterns: normal breathing, deep breathing, hyperventilation, and apnea. The test was performed after fabricating a clothing-type breathing sensor. Finally, the change in capacitance for actual respiration was determined by wearing a clothing-type respiration sensor based on the data collected. The effectiveness of the respiration sensor was demonstrated by measuring it to discern all waveforms, cycles, and ranges associated with the breathing pattern.

Wearable humidity sensor embroidered on a commercial face mask and its electrical properties

Owing to the rapid development in the field of e-textile-based flexible and portable sensors, the present work demonstrates a fully textile-based stretchable face mask humidity sensor which was created using digital embroidery technique. The design of the sensor was comprised of interdigitated structured electrodes made up of polymer core-based conductive silver-coated threads and hygroscopic threads embedded between them. The fabricated sensor performed well towards moisture detection in accordance with the principle where resistance of the face mask sensor decreased with the increase in the relative humidity along with the changing operational frequency in the range from 1 Hz to 200 kHz. The electrical response (resistance, impedance, capacitance and phase angle) of the novel thread-based sensor towards change in relative humidity was recorded and showed in the present work. The embroidery of polymer-based threads onto the face mask towards humidity sensing offers a novel wearable platform for more extended biomedical applications for detection of various breath biomarkers and thus early diagnosis of diseases.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10853-022-08135-2.