Fur-Imine-Functionalized Graphene Oxide-Immobilized Copper Oxide Nanoparticle Catalyst for the Synthesis of Xanthene Derivatives

Transferrin Immobilized Graphene Oxide Nanocomposite for Targeted Cancer Chemodynamic Therapy via Increasing Intracellular Labile Fe2+ Concentration

Recently, different alternative regulated cell death (RCD) pathways, viz., necroptosis, pyroptosis, ferroptosis, cuproptosis etc., have been explored as important targets for the development of cancer medications in recent years, as these can change the immunogenicity of the tumor microenvironment (TME) and will finally lead to the inhibition of cancer progression and metastasis. Here, we report the development of transferrin immobilized graphene oxide (Tfn@GOAPTES) nanocomposite as a therapeutic strategy toward cancer cell killing. The electrostatic immobilization of Tfn on the GOAPTES surface was confirmed by different spectroscopy and microscopy techniques. The Tfn immobilization was found to be ∼74 ± 4%, whereas the stability of the protein on the GO surface suggested a robust nature of the nanocomposite. The MTT assay suggested that Tfn@GOAPTES exhibited cytotoxicity toward HeLa cells via increased lipid peroxidation and DNA damage. Western blot studies resulted in decreased expression of acetylation on lysine 40 of α-tubulin and increased expression of LC3a/b for Tfn@GOAPTES treated HeLa cells, suggesting autophagy to be the main cause of the cell death mechanism. Overall, we predict that the present approach can be used as a therapeutic strategy for cancer cell killing via selective induction of a high concentration of intracellular iron.

Trifluoroacetic acid-mediated synthesis of xanthene constructs and their extensive anti-tuberculosis evaluation

A diverse range of 9-substituted 1,8-dioxohexahydroxanthenes was conceptualized and synthesized through a TFA-mediated approach in near quantitative yields without the use of column chromatography. From a series of 25 compounds, we found that compounds 14c and 14r exhibited promising anti-tuberculosis potential against avirulent and virulent strains of Mycobacterium tuberculosis with a Minimal Inhibitory Concentration (MIC) of 8 μg ml-1, achieving 99% bactericidal activity at the same concentration. This series of compounds was found to be inactive against common Gram-positive and Gram-negative pathogens, indicating that the activity is mycobacteria-specific. Since the strategies for treating tuberculosis employ a combinatorial therapy, we tested and observed that the two lead compounds displayed synergistic behavior with known anti-TB drugs (ATDs) and a significant (16-32 fold) decrease in MIC values of both leads was observed in combination with either RIF or INH. Interestingly the lead molecule 14c displayed only time-dependent kill kinetics and sterilized the whole culture of Mycobacterium tuberculosis H37Rv in just 48 hours.

Effect of surface modification of graphene oxide with a reactive silane coupling agent on the mechanical properties and biocompatibility of acrylic bone cements

Carbon allotrope materials (i.e. carbon nanotubes (CNTs), graphene, graphene oxide (GO)), have been used to reinforce acrylic bone cement. Nevertheless, the intrinsic incompatibility among the above materials produces a deficient interphase. Thus, in this work, the effect of the content of functionalized graphene oxide with a reactive silane on the mechanical properties and cell adhesion of acrylic bone cement was studied. GO was obtained by an oxidative process on natural graphite; subsequently, GO was functionalized with 3-methacryloxypropyltrimethoxysilane (MPS) to enhance the interphase between the graphenic material and acrylic polymeric matrix. Pristine GO and functionalized graphene oxide (GO-MPS) were characterized physicochemically (XPS, XRD, FTIR, and Raman) and morphologically (SEM and TEM). Silanized GO was added into the acrylic bone cement at different concentrations; the resulting materials were characterized mechanically, and their biocompatibility was also evaluated. The physicochemical characterization results showed that graphite was successfully oxidized, and the obtained GO was successfully functionalized with the silane coupling agent (MPS). SEM and TEM images showed that the GO is composed of few stacked layers. Compression testing results indicated a tendency of increasing stiffness and toughness of the acrylic bone cements at low concentration of functionalized GO. Additionally, the bending testing results showed a slightly increase in bone cement strain with the incorporation of GO-MPS. Finally, all samples exhibited cell viability higher than 70%, which means that materials are considered non-cytotoxic, according to the ISO 10993-5 standard.

Covalent Organic Framework Impregnated with Silver and Copper Nanoparticles: An Advanced Approach for Catalytic Degradation of Organic Pollutants in Wastewater

In this study, we introduce an economically viable and scalable process for developing a novel covalent organic framework (COF), which is a cross-linked polymer. The resulting material, TzTFB-COF, is successfully functionalized with silver and copper nanoparticles, which show high adequacy in the degradation of nitroaromatic compounds (NACs). For the synthesis of TzTFB-COF, s-tetrazine diamine (Tz) and 1,3,5-triformylbenzene (TFB) are chosen as building blocks, which exhibit a high density of nitrogen-containing sites. TzTFB-COF shows good chemical and thermal stability (>300 °C). For functionalization of TzTFB-COF with silver and copper nanoparticles, a solution infiltration technique is used. The composite materials, i.e., Ag@TzTFB-COF and Cu@TzTFB-COF, have been characterized using various spectroscopic and analytical techniques, which show high activity, high selectivity, and excellent chemical and thermal stability up to 350 °C. The silver and copper contents of Ag@TzTFB-COF and Cu@TzTFB-COF are determined to be 9.6 and 12.4 wt % by inductively coupled plasma optical emission spectrometer (ICP-OES). The catalytic efficiency of the synthesized Ag@TzTFB-COF and Cu@TzTFB-COF materials is assessed in the context of catalyzing the hydrogenation of NACs. Experimental results reveal a remarkable catalytic performance when conducted in an aqueous medium, and notably, the materials demonstrate substantial potential for reusability across multiple catalytic cycles. The determined parameters for the catalytic hydrogenation reaction, i.e., the rate constants and Gibbs free energies, are found to be 0.0185 s-1 and 9.878 kJ/mol for Ag@TzTFB-COF and 0.0219 s-1 and 9.615 kJ/mol for Cu@TzTFB-COF. Thus, the catalytic reaction exhibits characteristics of endothermic, endergonic, and nonspontaneous nature.

Efficiency of zero-dimensional and two-dimensional graphene architectural nanocomposites for organic transformations in the contemporary environment: a review

Graphene derivatives-based nanocatalyst finds increasing utilisation in the catalysis field for organic transformations. Researchers have been working on the development of graphene oxide, reduced graphene oxide, and graphene quantum dots with metal or metal oxide nanocomposites over the last few years. These materials exhibit excellent electrical, catalytic, optical, thermal, and magnetic properties. In particular, GO/rGO/GQDs composites assisted by metal or metal oxides have attracted broad attention for their possible applications in organic compound synthesis, drug delivery, sensors, devices, and the related areas of the environment. In this review, we have summarised GO/rGO/GQDs-metal or metal oxide composites using catalyst for organic conversions and synthesis of organic compounds in accordance with the discussion on the key problems and prospects for future study. Furthermore, there is a significant function for the catalytic efficiency of composites assisted by metal or metal oxide nanocatalyst which is categorised by graphene derivatives bases.

Synthesis of N-Benzylideneaniline by Schiff base reaction using Kinnow peel powder as Green catalyst and comparative study of derivatives through ANOVA techniques

The cheap and easy availability of the Kinnow peel waste has reported various applications due to presence of multifunctional groups. Therefore, in present study we explored its application to synthesize N-Benzylideneaniline and its derivatives based on Schiff base reaction. Kinnow peel powder is characterized by FTIR, TEM, SEM, XRD, EDX, and TGA for functional groups, morphology, surface, elements and thermal stability. Benzaldehyde, aniline, and their derivatives such as 4-methyl benzaldehyde, 4-hydroxy benzaldehyde, 4-methoxy benzaldehyde, and 4-methoxy aniline have been used to compare the efficacy of the Schiff base reaction using analysis of variance (ANOVA) and it has been observed that combination of Aniline and benzaldehyde for Schiff base reaction provided 85% yield of relative product.

NiII NPs entrapped within a matrix of l-glutamic acid cross-linked chitosan supported on magnetic carboxylic acid-functionalized multi-walled carbon nanotube: a new and efficient multi-task catalytic system for the green one-pot synthesis of diverse heterocyclic frameworks

In the present study, a new l-glutamic acid cross-linked chitosan supported on magnetic carboxylic acid-functionalized multi-walled carbon nanotube (Fe₃O₄/f-MWCNT-CS-Glu) nanocomposite was prepared through a convenient one-pot multi-component sequential strategy. Then, nickel^II nanoparticles (Ni^II NPs) were entrapped within a matrix of the mentioned nanocomposite. Afterward, the structure of the as-prepared Fe₃O₄/f-MWCNT-CS-Glu/Ni^II nanosystem was elucidated by various techniques, including FT-IR, PXRD, SEM, TEM, SEM-based EDX and elemental mapping, ICP-OES, TGA/DTA, and VSM. In the next part of this research, the catalytic applications of the mentioned nickel^II-containing magnetic nanocomposite were assessed upon green one-pot synthesis of diverse heterocyclic frameworks, including bis-coumarins (3a–n), 2-aryl(or heteroaryl)-2,3-dihydroquinazolin-4(1H)-ones (5a–r), 9-aryl-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-diones (7a–n), and 2-amino-4-aryl-7,7-dimethyl-5-oxo-5,6,7,8-tetrahydro-4H-chromene-3-carbonitriles (9a–n). The good-to-excellent yields of the desired products, satisfactory reaction rates, use of water solvent or solvent-free reaction medium, acceptable turnover numbers (TONs) and turnover frequencies (TOFs), along with comfortable recoverability and satisfying reusability of the as-prepared nanocatalyst for at least eight successive runs, and also easy work-up and purification procedures are some of the advantages of the current synthetic protocols.

In this research work, an Fe₃O₄/f-MWCNT-CS-Glu/Ni^II hybrid nanocomposite was synthesized, characterized, and used as a new and efficient multi-task catalytic system for the green one-pot synthesis of diverse heterocyclic frameworks.

Oxidation of BINOLs by Hypervalent Iodine Reagents: Facile Synthesis of Xanthenes and Lactones

Xanthene derivatives have broad applications in medicines, fluorescent probes, dyes, food additives, etc. Therefore, much attention was focused on developing the synthetic methods to prepare these compounds. Binaphthyl‐based xanthene derivatives were prepared through the oxidation of BINOLs promoted by the hypervalent iodine reagent iodosylbenzene (PhIO). Nine‐membered lactones were obtained through a similar oxidative reaction when iodoxybenzene (PhIO₂) was used. Additionally, one‐pot reactions of BINOLs, PhIO and nucleophiles such as alcohols and amines were also investigated to provide alkoxylated products and amides in good to excellent yields.

Bioinspired NiO Nanospheres: Exploring In Vitro Toxicity Using Bm-17 and L. rohita Liver Cells, DNA Degradation, Docking, and Proposed Vacuolization Mechanism

The present work demonstrated a novel Cleome simplicifolia-mediated green fabrication of nickel oxide nanoparticles (NiO NPs) to explore in vitro toxicity in Bm-17 and Labeo rohita liver cells. As-fabricated bioinspired NiO NPs were characterized by several analytical techniques. X-ray diffraction (XRD) revealed a crystalline face-centered-cubic structure. Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) confirmed NiO formation. The chemical composition was confirmed by energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy. Brunauer-Emmett-Teller (BET) revealed the mesoporous nature. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed the formation of 97 nm diameter nanospheres formed due to the congregation of 10 nm size particles. Atomic force microscopy (AFM) revealed the nearly isotropic behavior of NiO NPs. Further, a molecular docking study was performed to explore their toxicity by binding with genetic molecules, and it was found that the docking energy was about -9.65284 kcal/mol. On evaluating the in vitro toxicity of NiO NPs for Bm-17 cells, the study showed that when cells were treated with a high concentration of NPs, cells were affected severely by toxicity, while at a lower concentration, cells were affected slightly. Further, on using 50 μg/mL, quick deaths of cells were observed due to the formation of more vacuoles in the cells. The DNA degradation study revealed that NiO NPs are significantly responsible for DNA degradation. For further confirmation, trypan blue assay was observed for cell viability, and morphological assessment was performed using inverted tissue culture microscopy. Further, the cytotoxicity of NiO NPs in L. rohita liver cells was studied. No toxicity was observed at 1 mg/L of NiO NPs; however, when the concentration was 30 and 90 mg/L, dark and shrank hepatic parenchyma was observed. Hence, the main cause of cell lysis is the increased vacuolization in the cells. Thus, the present study suggests that the cytotoxicity induced by NiO NPs could be used in anticancer drugs.

Role of Functional Groups in the Monomer Molecule on the Radical Polymerization in the Presence of Graphene Oxide. Polymerization of Hydroxyethyl Acrylate under Isothermal and Non-Isothermal Conditions

Functional groups in a monomer molecule usually play an important role during polymerization by enhancing or decreasing the reaction rate due to the possible formation of side bonds. The situation becomes more complicated when polymerization takes place in the presence of graphene oxide since it also includes functional groups in its surface. Aiming to explore the role of functional groups on polymerization rate, the in situ bulk radical polymerization of hydroxyethyl acrylate (HEA) in the presence or not of graphene oxide was investigated. Differential scanning calorimetry was used to continuously record the reaction rate under both isothermal and non-isothermal conditions. Simple kinetic models and isoconversional analysis were used to estimate the variation of the overall activation energy with the monomer conversion. It was found that during isothermal experiments, the formation of both inter- and intra-chain hydrogen bonds between the monomer and polymer molecules results in slower polymerization of neat HEA with higher overall activation energy compared to that estimated in the presence of GO. The presence of GO results in a dissociation of hydrogen bonds between monomer and polymer molecules and, thus, to higher reaction rates. Isoconversional methods employed during non-isothermal experiments revealed that the presence of GO results in higher overall activation energy due to the reaction of more functional groups on the surface of GO with the hydroxyl and carbonyl groups of the monomer and polymer molecules, together with the reaction of primary initiator radicals with the surface hydroxyl groups in GO.

Functionalization of graphene oxide with a hybrid P, N ligand for immobilizing and stabilizing economical and non-toxic nanosized CuO: an efficient, robust and reusable catalyst for the C–O coupling reaction in O-arylation of phenol

A new graphene oxide based heterogeneous catalytic system holding CuO nanoparticles through P and N donor sites for the C–O coupling reaction.

One-pot synthesis of a highly disperse core–shell CuO–alginate nanocomposite and the investigation of its antibacterial and catalytic properties

Sodium alginate extracted from native algae of the Persian Gulf for use in the synthesis of a highly disperse CuO–alginate nanocomposite, which is used as an antibacterial agent as well as a catalyst in the synthesis of amides.

A sustainable gateway to access 1,8-dioxo-octahydroxanthene scaffolds via a surface-engineered halloysite-based magnetically responsive catalyst

A covalently modified, surface-engineered Cu(ii)@DCH@CPTMS@MHNT nanocatalyst is synthesized, which showed incredible catalytic activity in accessing a library of xanthene scaffolds.

Evaluation of Utilizing Functionalized Graphene Oxide Nanoribbons as Compatible Biomaterial for Lysozyme

Graphene oxide nanoribbons with superior physicochemical properties acquired from graphene and carbon nanotubes have been used in various applications including biomedical applications. For biomedical applications, it is of utmost importance to understand how these graphene oxide nanoribbons interact with proteins and the influence they have on protein conformation and function. In this regard, an attempt has been made to evaluate the utility of graphene oxide nanoribbons as a compatible biomaterial for lysozyme (Lys) protein. In this study, graphene oxide nanoribbons (GONRs) synthesized from multiwalled carbon nanotubes (MWCNTs) were first functionalized with (3-aminopropyl)triethoxysilane (APTES) and further modified with vanillin (Val) to obtain Val-APTES-GONRs. On characterization, it was found that the Val-APTES-GONRs material had a ribbonlike morphology with abundant functionalities for interaction with protein. On evaluation of Val-APTES-GONRs as a compatible biomaterial for Lys, studies revealed that a lower concentration of the as-synthesized material has less influence on the conformation and the structure of Lys with better activity, whereas higher concentrations of the as-synthesized material had a greater influence on conformation and the structure of Lys with decreased activity. Overall, the thermal stability of Lys was maintained after introducing the Val-APTES-GONRs material. In addition, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier transform infrared (FTIR) and Raman spectroscopies were performed for Lys composites with Val-APTES-GONRs for further understanding biomolecular interactions. This study is beneficial for designing advanced graphene-based materials for numerous bioinspired applications and better biomaterials for biotechnological use.

Extended Release of Metronidazole Drug Using Chitosan/Graphene Oxide Bionanocomposite Beads as the Drug Carrier

This study depicts the facile approach for the synthesis of chitosan/graphene oxide bionanocomposite (Chi/GO) beads via the gelation process. This is the first-ever study in which these Chi/GO beads have been utilized as a drug carrier for the oral drug delivery of metronidazole (MTD) drug, and investigations were made regarding the release pattern of the MTD drug using these Chi/GO beads as a drug carrier for a prolonged period of 84 h. The MTD is loaded on the surface as well as the cavity of the Chi/GO beads to result in MTD-Chi/GO bionanocomposite beads. The MTD drug loading was found to be 683 mg/g. Furthermore, the in vitro release patterns of pure drug and the drug encapsulated with Chi/GO beads are explored in simulated gastric as well as simulated intestinal fluids with phosphate-buffered saline (PBS) of pH 1.2 and 7.4, respectively. As-synthesized bionanocomposite beads have shown excellent stability and capacity for extended release of the MTD drug as compared to the pure drug in terms of bioavailability in both media. The cumulative release data are fitted with the Korsmeyer-Peppas kinetics and first-order reaction kinetics at pH 1.2 and 7.4. The synthesized bionanocomposite beads have good potential to minimize the multiple-dose frequency with the sustained drug release property and can reduce the side effects due to the drug.

Sustainable Synthesis of MOF-5@GO Nanocomposites for Efficient Removal of Rhodamine B from Water

Herein, a metal-organic framework (MOF-5) is synthesized by a solvothermal process and graphene oxide (GO) is prepared from the improved Hummer's method. The synthesis of MOF-5@GO nanocomposites is one-pot process via a grinding method and employed for the removal of Rhodamine B (RhB) dye. The removal efficiency of RhB is found to be 60.64% (151.62 mg·g-1) at 500 ppm. About 98.88% of RhB is removed within 5 min of contact time and increased up to 99.68% up to 10 min. The removal rate of MOF-5@GO nanocomposites is much better than that of pristine MOF-5. Equilibrium adsorption capacity is determined by a series of different experimental conditions such as pH, time, and concentration of dye solution. Although the results also showed that dye removal on MOF-5@GO nanocomposites is well described by the Langmuir isotherm (R 2 = 0.9703), the adsorption kinetics data reveals pseudo-second-order (R 2 = 0.9908). The synthesized nanocomposite is efficient for removal of dye, cost-effective, and reusable. Additionally, stability and self-degradation studies of pure RhB are reported in aqueous solution for up to 120 days at different pH values (pH 1-12).

Co-Sn-Cu oxides/graphene nanocomposites as green catalysts for preparing 1,8-dioxo-octahydroxanthenes and apoptosis-inducing agents in MCF-7 human breast cancer cells

In this work, Co-Sn-Cu oxides/graphene nanocomposite, 30-40 ± 0.5 nm in size, was synthesized by solid-state microwave irradiation. This method presents several advantages such as operational simplicity, fast, low cost, safe and energy efficient, and suitability for production of high purity of nanoparticles. Other advantages of this method are there is no need for the use of solvent, fuel, and surfactant. Co-Sn-Cu oxides/graphene nanocomposites have been characterized by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometer, energy-dispersive X-ray spectroscopy, and UV-Vis spectroscopy. The synthesized nanocomposites were used as novel highly efficient catalysts for the synthesis of 1,8-dioxo-octahydroxanthenes at room temperature. The catalysts are recoverable and can be reused for six runs without loss of their activity. Also, the obtained nanocomposites exhibited significant anticancer activity against breast cancer cells and they could induce apoptosis in cancer cells.

Incorporation of Keggin-based H3PW7Mo5O40 into bentonite: synthesis, characterization and catalytic applications

The Keggin-based molybdo-substituted tungstophosphoric acid, H3[PW7Mo5O40]·12H2O, were synthesized and incorporated with a bentonite clay by using a wetness impregnation method. The catalysts were characterized using several methods, such as inductively coupled plasma-atomic emission spectroscopy (ICP-AES), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), scanning electron microscopy energy-dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscopy (TEM), and thermogravimetric and differential thermal analysis (TG-DTA). This extremely active catalytic system provides a green strategy for the synthesis of 1,8-dioxo-octahydroxanthene and 1,8-dioxo-decahydroacridine derivatives under solvent free conditions at 80 °C with a good reaction mass efficiency, effective mass yield, and excellent atom economy. Both the surface acidity and catalytic activity sharply increased after H3[PW7Mo5O40]·12H2O was impregnated with bentonite clay. In addition, the PW7Mo5/bentonite catalyst can be conveniently recovered and reused numerous times without demonstrating a significant loss in activity.

Graphene-based hybrid materials as promising scaffolds for peripheral nerve regeneration

Peripheral nerve injury (PNI) is a serious clinical health problem caused by the damage of peripheral nerves which results in neurological deficits and permanent disability. There are several factors that may cause PNI such as localized damage (car accident, trauma, electrical injury) and outbreak of the systemic diseases (autoimmune or diabetes). While various diagnostic procedures including X-ray, magnetic resonance imaging (MRI), as well as other type of examinations such as electromyography or nerve conduction studies have been efficiently developed, a full recovery in patients with PNI is in many cases deficient or incomplete. This is the reason why additional therapeutic strategies should be explored to favor a complete rehabilitation in order to get appropriate nerve injury regeneration. The use of biomaterials acting as scaffolds opens an interesting approach in regenerative medicine and tissue engineering applications due to their ability to guide the growth of new tissues, adhesion and proliferation of cells including the expression of bioactive signals. This review discusses the preparation and therapeutic strategies describing in vitro and in vivo experiments using graphene-based materials in the context of PNI and their ability to promote nerve tissue regeneration.

Protein immobilization on graphene oxide or reduced graphene oxide surface and their applications: Influence over activity, structural and thermal stability of protein

Due to the essential role of biological macromolecules in our daily life; it is important to control the stability and activity of such macromolecules. Therefore, the most promising route for enhancement in stability and activity is immobilizing proteins on different support materials. Furthermore, large surface area and surface functional groups are the important features that are required for a better support system. These features of graphene oxide (GO) and reduced graphene oxide (RGO) makes them ideal support materials for protein immobilization. Studies show the successful formation of GO/RGO-protein complexes with enhancement in structural/thermal stability due to various interactions at the nano-bio interface and their utilization in various functional applications. The present review focuses on protein immobilization using GO/RGO as solid support materials. Moreover, we also emphasized on basic underlying mechanism and interactions (hydrophilic, hydrophobic, electrostatic, local protein-protein, hydrogen bonding and van der Walls) between protein and GO/RGO which influences structural stability and activity of enzymes/proteins. Furthermore, GO/RGO-protein complexes are utilized in various applications such as biosensors, bioimaging and theranostic agent, targeted drug delivery agents, and nanovectors for drug and protein delivery.

Tungsten oxides: green and sustainable heterogeneous nanocatalysts for the synthesis of bioactive heterocyclic compounds

Tungsten oxide (WO₃) as an efficient heterogeneous catalyst was prepared via a simple hydrothermal route for the synthesis of a wide range of bioactive heterocyclic compounds. The present investigation deals with the rapid and low-cost synthesis of C-3-alkylated 4-hydroxycoumarin, chromene, and xanthene derivatives. WO₃ nanorods (NRs) are successfully envisaged to catalyze desired transformations, demonstrating the wide range of their potential applications in catalysis. Synthetic transformation details, smallest catalytic amounts, excellent product yields, and plausible reaction mechanisms for the formation of these heterocyclic scaffolds are elicidated. As-prepared WO₃ NRs are characterized to confirm their structural, chemical, and morphological parameters by X-ray diffraction, X-ray photoelectron spectroscopy, and field emission scanning electron microscopy measurements, respectively. We discuss the factors that govern the formation of products, and the active role of WO₃ NRs, which are essential for the activation of substrates in the present study of thermal conditions. Herein, detailed synthesis and spectroscopic information of the prepared compounds are reported.

Ru x Pd y Alloy Nanoparticles Uniformly Anchored on Reduced Graphene Oxide Nanosheets (Ru x Pd y @rGO): A Recyclable Catalyst

In this work, Ru _x Pd _y alloy nanoparticles were uniformly decorated on a two-dimensional reduced graphene oxide (rGO) sheet by an in situ chemical co-reduction process. The resulting products were characterized by various physiochemical techniques such as X-ray diffraction, Raman spectroscopy, energy-dispersive X-ray spectroscopy, inductively coupled plasma atomic absorption spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy. Further, the synthesized Ru _x Pd _y @rGO nanocomposites have been employed as a heterogeneous catalyst for three different catalytic reactions: (1) dehydrogenation of aqueous ammonia borane (AB); (2) hydrogenation of aromatic nitro compounds using ammonia borane as the hydrogen source, and (3) for the synthesis of aromatic azo derivatives. The present work illustrates the sustainable anchoring of metal nanoparticles over the surface of rGO nanosheets, which could be used for multifarious catalytic reactions.

Application of cyclohexane-1,3-diones for six-membered oxygen-containing heterocycles synthesis

Cyclohexan-1,3-dione derivatives are versatile scaffolds for the synthesis of a variety of value-added organic molecules including heterocycles and natural products. Six-membered oxygen heterocycles prepared from cyclohexan-1,3-diones are of much importance as they are intermediate for the synthesis of a number of natural products and several other valuable bioactive molecules which shows anti-viral, anti-bacterial, analgesic, antimalarial, anti-inflammatory, anti-allergic, anti-tumor and anti-cancer activities. These advantages have inspired us to write a detailed survey on the newly developed methods which are very essential in the construction of six-membered oxygen heterocycles. Further, the versatility in the chemistry of cyclohexan-1,3-dione and its derivatives is due to the presence of highly active methylene moiety and its active di-carbonyl groups. Recently, reactions of cyclohexane-1,3-dione and its derivatives with other substrates for instance aldehydes, malononitriles, NMSM, chalcones, isatin etc. have been established for the construction of a variety of six-membered oxygen heterocycles. The studies reported in this review article involved the synthesis of six-membered oxygen-containing heterocycles which includes 4H-chromen-5(6H)-one, 2H-xanthen-1(9H)-one, 2H-xanthen-1,8(5H,9H)-dione, 6H-chromen-2,5-dione derivatives and natural products having six-membered oxygen heterocycles from cyclohexane-1,3-dione and its derivatives as one of the substrate.