Supramolecular Route for Enhancing Polymer Electrospinnability

Pair of Functional Polyesters That Are Photo-Cross-Linkable and Electrospinnable to Engineer Elastomeric Scaffolds with Tunable Structure and Properties

A pair of alkyne- and thiol-functionalized polyesters are designed to engineer elastomeric scaffolds with a wide range of tunable material properties (e.g., thermal, degradation, and mechanical properties) for different tissues, given their different host responses, mechanics, and regenerative capacities. The two prepolymers are quickly photo-cross-linkable through thiol-yne click chemistry to form robust elastomers with small permanent deformations. The elastic moduli can be easily tuned between 0.96 ± 0.18 and 7.5 ± 2.0 MPa, and in vitro degradation is mediated from hours up to days by adjusting the prepolymer weight ratios. These elastomers bear free hydroxyl and thiol groups with a water contact angle of less than 85.6 ± 3.58 degrees, indicating a hydrophilic nature. The elastomer is compatible with NIH/3T3 fibroblast cells with cell viability reaching 88 ± 8.7% relative to the TCPS control at 48 h incubation. Differing from prior soft elastomers, a mixture of the two prepolymers without a carrying polymer is electrospinnable and UV-cross-linkable to fabricate elastic fibrous scaffolds for soft tissues. The designed prepolymer pair can thus ease the fabrication of elastic fibrous conduits, leading to potential use as a resorbable synthetic graft. The elastomers could find use in other tissue engineering applications as well.

Hydrophilic Nonwoven Nanofiber Membranes as Nanostructured Supports for Enzyme Immobilization

The high porosity, interconnected pore structure, and high surface area-to-volume ratio make the hydrophilic nonwoven nanofiber membranes (NV-NF-Ms) promising nanostructured supports for enzyme immobilization in different biotechnological applications. In this work, NV-NF-Ms with excellent mechanical and chemical properties were designed and fabricated by electrospinning in one step without using additives or complicated crosslinking processes after electrospinning. To do so, two types of ultrahigh-molecular-weight linear copolymers with very different mechanical properties were used. Methyl methacrylate-co-hydroxyethyl methacrylate (p(MMA)-co-p(HEMA)) and methyl acrylate-co-hydroxyethyl acrylate (p(MA)-co-p(HEA)) were designed and synthesized by reverse atom transfer radical polymerization (reverse-ATRP) and copper-mediated living radical polymerization (Cu⁰-MC-LRP), respectively. The copolymers were characterized by nuclear magnetic resonance (¹H-NMR) spectroscopy and by triple detection gel permeation chromatography (GPC). The polarity, topology, and molecular weight of the copolymers were perfectly adjusted. The polymeric blend formed by (MMA)₁₀₀₂-co-(HEMA)₁₀₀₂ (M _w = 230,855 ± 7418 Da; M _n = 115,748 ± 35,567 Da; PDI = 2.00) and (MA)₁₁₇₀₉-co-(HEA)₇₈₀₆ (M _w = 1.972 × 10⁶ ± 33,729 Da; M _n = 1.395 × 10⁶ ± 35,019 Da; PDI = 1.41) was used to manufacture (without additives or chemical crosslinking processes) hydroxylated nonwoven nanofiber membranes (NV-NF-Ms-OH; 300 nm in fiber diameter) with excellent mechanical and chemical properties. The morphology of NV-NF-Ms-OH was studied by scanning electron microscopy (SEM). The suitability for enzyme binding was proven by designing a palette of different surface functionalization to enable both reversible and irreversible enzyme immobilization. NV-NF-Ms-OH were successfully functionalized with vinyl sulfone (281 ± 20 μmol/g), carboxyl (560 ± 50 μmol/g), and amine groups (281 ± 20 μmol/g) and applied for the immobilization of two enzymes of biotechnological interest. Galactose oxidase was immobilized on vinyl sulfone-activated materials and carboxyl-activated materials, while laccase was immobilized onto amine-activated materials. These preliminary results are a promising basis for the application of nonwoven membranes in enzyme technology.

Surface Wrinkling on Polymer Films

A series of gold precursor solutions are prepared by dissolving HAuCl₄ and its mixtures with K₂CO₃ of different contents in deionized (DI) water. Neat HAuCl₄ predominately forms AuCl₄^- ions in an aqueous solution. In the presence of K₂CO₃, AuCl₄^- ions hydrolyze to form [AuCl_4-x(OH)_x]^- complex ions. Increasing the content of K₂CO₃ in a gold precursor solution increases the content of [AuCl_4-x(OH)_x]^- complex ions and decreases the content of AuCl₄^- ions. Poly(4-vinyl pyridine) (P4VP) films of two different molecular weights are deposited on SiO_x/Si by spin coating, by which the thicknesses are controlled by polymer weight fractions in butanol. Those P4VP films form periodic wrinkles when immersed in aqueous solutions, followed by drying. The surface wrinkling is induced by swelling pressure that overwhelms the mechanical property of the P4VP film. The periodicity and amplitude of wrinkles grown on the P4VP films strongly correlate with initial thickness, AuCl₄^- ion content, and residual stress.

Electronic Nose Based on Carbon Nanocomposite Sensors for Clove Essential Oil Detection

This work describes the development of an electronic nose (e-nose) based on carbon nanocomposites to detect clove essential oil (CEO), eugenol (EUG), and eugenyl acetate (EUG.ACET). Our e-nose system comprises an array of six sensing units modified with nanocomposites of poly(aniline), graphene oxide, and multiwalled carbon nanotubes doped with different acids, dodecyl benzene sulfonic acid, camphorsulfonic acid, and hydrochloric acid. The e-nose presented an excellent analytical performance to the detected analytes (CEO, EUG, and EUG.ACET) with high sensitivity and reversibility. The limit of detection was lower than 1.045 ppb, with response time (<13.26 s) and recovery time (<106.29 s) and low hysteresis. Information visualization methods (PCA and IDMAP) demonstrated that the e-nose was efficient to discriminate the different concentrations of analyte volatile oil compounds. PM-IRRAS measurements suggest that the doping mechanism of molecular architectures is composed of a change in the oscillation energy of the characteristic dipoles and changes in the molecular orientation dipoles C═C and C═O at 1615 and 1740 cm^-1, respectively. The experimental results indicate that our e-nose system is promising for a rapid analysis method to monitor the quality of essential oils.