Microwave-Assisted Catalytic Degradation of Brilliant Green by Spinel Zinc Ferrite Sheets

Efficient visible light-induced photocatalytic degradation of tetracycline hydrochloride using CuFe2O4 and PANI/CuFe2O4 nanohybrids

Tetracycline hydrochloride (TC-HCl) is widely implemented as a wide-ranging antibacterial drug in medical care and animal husbandry, in spite of having negative effects on the environment and human health. Photocatalytic treatment is one of the popular techniques used to treat TC-HCl in wastewater. In this study, we have used CuFe2O4 and CuFe2O4/polyaniline (PANI) nanohybrids as photocatalysts for the degradation of TC-HCl. The metal ferrite and its nanohybrids were synthesized by co-precipitation method. FTIR, UV-Vis, XRD, and SEM-EDX were used to characterize the synthesized nanohybrids. The optical band gaps were estimated to be 2.74 eV for CuFe2O4, 1.72 eV for 1-PANI/CuFe2O4, 1.66 eV for 3-PANI/CuFe2O4, and 1.31 eV for 5-PANI/CuFe2O4. The photocatalytic performance of the nanohybrids appeared superior than pristine CuFe2O4, and maximum photocatalytic degradation was observed to be 86% within 120 min using 5-PANI/CuFe2O4 as the photocatalyst. The degraded fragments were analyzed by LCMS technique, and a tentative mechanism for the degradation of TC-HCl was proposed.

Preparation and characterization of a novel cobalt-substitution cadmium aluminate spinel for the photodegradation of azo dye pollutants

Modern-year organic contaminants have been highly observed in ecosystems since they are not removed entirely and remain dangerous. Semiconductor binary oxide photocatalysts have been well accredited as capable technology for ecological contaminants degradation in the existence of visible irradiation. In this research, novel Co ions doped CdAl₂O₄ materials were fabricated by a facile co-precipitation approach. The fabricated pure and Co-doped CdAl₂O₄ exhibited the typical peaks of CdAl₂O₄ with the E_g of 3.66, 3.24, 2.57, and 2.41 eV respectively. The HR-TEM microstructures revealed that the Co (0.075 M) doped CdAl₂O₄ has rod-like morphology, and some places are spherical with particle sizes reaching 21 nm. The PL peaks of the Co (0.075 M)-CdAl₂O₄ are much lesser than that of the other dopant and pure CdAl₂O₄, representing much more effectual separation of generated e^- and h⁺ at the interface which in fact outcomes in superior expected photodegradation behaviours. The Co (0.075 M)-CdAl₂O₄ catalyst demonstrated the highest performances of 92 and 94% toward the degradation of both dyes, respectively, owing to the lowest e^- and h⁺ recombination rate. The Co (0.075 M) doped CdAl₂O₄ photocatalyst revealed outstanding reusability and stability under visible irradiation, retaining the performance of about 83 and 86% after the fifth consecutive run of BB and BG elimination. A probable photodegradation mechanism of Co (0.075 M) doped CdAl₂O₄ was suggested since the photoexcited h⁺, OH^- and O₂^- species contributed to the removal process, and that was affirmed by the scavenging test and ESR analysis. This research offers new ways to improve the photodegradation performance of the Co-doped CdAl₂O₄ catalyst that will be employed in pharmaceutical applications and wastewater treatment.

Recyclable magnetic Fe3O4@C for methylene blue removal under microwave-induced reaction system

The reclamation and removal of organic pollutants are difficult issues of world concern. In this study, a microwave-induced reaction system (MIRS) is applied to synthesize the multifunctional composite of Fe₃O₄@C, which is employed to adsorb, separate and catalytic oxide the typical organic dye of methylene blue (MB). SEM, TEM, VSM, XPS, pHpzc, and N₂ adsorption performances are carried out to characterize the Fe₃O₄@C. Results show that the Fe₃O₄@C mainly consists of activated Fe-O-C microspheres, which possess plentiful mesopore and macropore structures on surfaces. Batch adsorption experiments were carried out by varying key reaction conditions to optimize these. The maximum adsorption capacity of MB onto the Fe₃O₄@C was 305.0 mg g^-1 in 120 min, at pH 10, and at a temperature of 323 K. MIRS was also assisted to regenerate the spent Fe₃O₄@C which presented good regeneration efficiency by sustaining 16 regeneration cycles without any oxidizing agent. SEM images and FTIR spectrum verified that MB would translate into greater or smaller-sized carbon microspheres. What's more, the adsorption of MB onto both initial and the 16th regenerated Fe₃O₄@C obeyed the Langmuir isotherm model and followed the pseudo-second-order adsorption kinetics, indicating the adsorptive stability after regeneration. In this study, the Fe₃O₄@C combined with MIRS may be one innovative strategy for organic pollutants' complete removal in the future.

Enhancement of photocatalytic activities of ZnFe2O4 composite by incorporating halloysite nanotubes for effective elimination of aqueous organic pollutants

ZnFe₂O₄ is a highly desirable catalyst due to its exceptional photo-response in the visible light region, but various drawbacks, such as rapid recombination of photo-generated electron-hole pairs and severe particle agglomeration, make it difficult to use. In this study, a co-precipitation approach was used to create ZnFe₂O₄/HNT (ZF/HNTs) composites. XRD, SEM, TEM, FTIR, BET, and DRS were used to characterize the ZF/HNT composites. Furthermore, the effectiveness of removing crystal violet under simulated visible light irradiation was used to assess photocatalytic activity. The results showed that ZnFe₂O₄ with typical diameters of around 20 nm was significantly distributed on halloysite nanotubes. Because of the synergistic impact of the improved agglomeration phenomena of ZnFe₂O₄ and the decreased recombination rate of photo-generated electrons and holes, all of the composites had superior photocatalytic performance than pure ZnFe₂O₄. The ZF/HNTs-11 composite exhibited the highest removal performance, removing 96.7% of the sample in less than 150 min. In addition, the composite was very stable and reusable. Consequently, ZF/HNTs-11 composite is an effective catalyst for treating pollutants found in wastewater.

Atomic sheets of silver ferrite with universal microwave catalytic behavior

Prompt degradation of organic pollutants renders microwave (MW) catalysis technology extremely lucrative; ideal microwave catalysts are therefore being hunted with an unprecedented urgency. Ideal functional microwave catalyst should be highly crystalline, room temperature ferromagnetic (for magnetic retrieval), highly dielectric (for sufficient microwave absorption) apart from being structurally stable at high temperature. The potential of silver ferrite 2D sheets (2D AFO) synthesized using a novel microwave technique as a microwave catalyst for the degradation of a variety of organic dyes and antibiotics was investigated in this article. While organic dyes like malachite green (MG), brilliant green (BG) and nile blue A (NB) achieved 99.2%, 98.8% and 95.2%, respectively; antibiotic tetracycline hydrochloride (TCH) molecule resulted in 75.8% degradation efficiency. Total organic carbon (TOC) measurements yielded 76%, 59.1%, 49.1% and 47.6% of carbon content for MG, BG, NB and TCH, respectively. The reaction pathway via intermediates and subsequent degradation to CO₂ and H₂O is revealed by liquid chromatography-mass spectrometry (LCMS). Both superoxide and hydroxyl radicals are participating in the process, according to scavenger tests. The evolution of silver ferrite as a new 2D material and its demonstration as an ideal microwave catalyst will lead to a new beginning in catalysis science and technology.

Zinc ferrite-graphitic carbon nitride nanohybrid for photo-catalysis of the antibiotic ciprofloxacin

2D hybrid sheets of zinc ferrite and graphitic carbon nitride were explored for their application as a UV catalyst for the degradation of ciprofloxacin.

Photocatalytic Degradation of Single and Binary Mixture of Brilliant Green and Rhodamine B Dyes by Zinc Sulfide Quantum Dots

We present the preparation of octadecylamine-capped ZnS quantum dots from bis(morpholinyldithiocarbamato)Zn(II) complex. The complex was thermolyzed at 130 °C in octadecylamine at different times, to study the effect of reaction time on the morphological and photocatalytic properties of the ZnS quantum dots. Powder X-ray diffraction patterns confirmed a hexagonal wurtzite crystalline phase of ZnS, while HRTEM images showed particle sizes of about 1–3 nm, and energy band gaps of 3.68 eV (ZnS–1), 3.87 eV (ZnS–2), and 4.16 eV (ZnS–3) were obtained from the Tauc plot for the ZnS nanoparticles. The as-prepared ZnS were used as photocatalysts for the degradation of brilliant green, rhodamine B, and binary dye consisting of a mixture of brilliant green-rhodamine B. The highest photocatalytic degradation efficiency of 94% was obtained from ZnS–3 with low photoluminescence intensity. The effect of catalytic dosage and pH of the dyes solution on the photocatalytic process shows that pH 8 is optimal for the degradation of brilliant green, while pH 6.5 is the best for photocatalytic degradation of rhodamine B. The degradation of the binary dyes followed the same trends. The effect of catalytic dosage shows that 1 mg mL⁻¹ of the ZnS nano-photocatalyst is the optimum dosage for the degradation of organic dyes. Reusability studies show that the ZnS quantum dots can be reused five times without a significant reduction in degradation efficiency.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Microwave synthesized strontium hexaferrite 2D sheets as versatile and efficient microwave catalysts for degradation of organic dyes and antibiotics

Microwave catalysis is extremely lucrative due to prompt mineralization and superior efficiency. Ideal microwave catalysts should possess crystalline nature, large surface area, room temperature ferromagnetic, high dielectric properties apart from structural stability at elevated temperature. In the present article, the candidature of microwave synthesized strontium hexaferrite 2D sheets (2D SFO) has been explored as microwave catalysts for the degradation of a host of organic dyes and antibiotics. Malachite green (MG) and nile blue A (NB) in particular exhibited 99.8% and 97.6% degradation, respectively. Degradation reaction is established to follow pseudo-second-order kinetics. Total organic carbon (TOC) measurements hint at 52% and 60% mineralization for MG and NB, respectively. Liquid chromatography-mass spectroscopy (LCMS) measurements indicate the reaction pathways via intermediates and eventual mineralization to CO₂ and H₂O. Mott-Schottky measurements along with scavenger tests hint that both hydroxyl and superoxide radicals participate in the reaction. Having superior efficiency apart from the versatile nature of the 2D SFO microwave catalyst, the present research will guide to the emergence of microwave catalysis as a new technology.

A Facile Fabrication of ZnFe2O4/Sepiolite Composite with Excellent Photocatalytic Performance on the Removal of Tetracycline Hydrochloride

The excellent photo-response of ZnFe2O4 in the visible light region makes it a promising catalyst, whereas some defects like serious particle agglomeration and easy recombination of photo-generated electron-hole pairs hinder its application. In this work, the ZnFe2O4/sepiolite (ZF-Sep) composites were synthesized using a co-precipitation method. The obtained ZF-Sep composites were characterized by XRD, SEM, TEM, FT-IR, XPS, BET, VSM and DRS. Moreover, the photocatalytic performance was evaluated by the tetracycline hydrochloride removal efficiency under simulated visible light illumination. The results displayed that the ZnFe2O4 with average sizes about 20 nm were highly dispersed on sepiolite nanofibers. All the composites exhibited better photocatalytic performance than pure ZnFe2O4 due to the synergistic effect of the improvement on the agglomeration phenomenon of ZnFe2O4 and the reduction on the recombination rate of photo-generated electrons and holes. The optimum removal efficiency was that of the ZF-Sep-11 composite, which reached 93.6% within 3 h. Besides, the composite exhibited an excellent stability and reusability. Therefore, ZF-Sep composite is a promising catalyst for the treatment of wastewater contained antibiotics.

Sustainable synthesis of AFe2O4 (A = Mg, Zn, Mn) catalysts: comparing the photooxidative and electrochemical properties towards organic dyes detection and degradation

By serving as alternatives to toxic and hazardous solvents, green solvents assist in implementing the idea of sustainability.

Synthesis and application of magnetic materials-barium ferrite nanomaterial as an effective microwave catalyst for degradation of brilliant green

In this work, magnetic separably barium ferrite nanomaterial (BaFeO) was synthesized via citrate acid assisted sol-gel combustion method. Subsequently, X-ray diffraction (XRD), scanning electron microscopy-energy dispersion spectroscopy (SEM-EDS), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM) were applied for its structural, morphological, and electromagnetic characterization. In addition, microwave (MW) absorption and thermal conversion test results indicated the BaFeO had electrothermal rather than magnetothermal conversion capacity. Meanwhile, the synthesized BaFeO showed satisfactory performance in both eliminating and mineralization of a typical triphenylmethane dye, brilliant green (BG), in MW-induced catalytic oxidation (MICO) process without extra oxidant addition. Besides, changes in element valence and content of BaFeO before and after MICO process investigated with XRD, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) showed its relatively stable properties. Furthermore, transition oxygen species involved in MICO process was deduced as lattice oxygen species. Then, the possible degradation pathway of BG was proposed as demethylation, open-loop of triphenylmethane, releasing one ring, formation of the benzene ring and the ultimate mineralization based on the degradation intermediates tentatively identified by gas chromatography mass spectrometry (GC/MS) and liquid chromatography mass spectrometry (LC/MS), respectively. Finally, ecotoxicity analysis by ecological structure activity relationships (ECOSAR) showed that both the acute and chronic toxicity of these intermediates were lower than that of parent BG. These findings are important regarding the development of efficient catalysts in MICO process for degradation of BG analogues in wastewater.

The Advances in the Special Microwave Effects of the Heterogeneous Catalytic Reactions

In the present, microwave field has been widely used in chemical processes as an important means of intensification. The heterogeneous catalysts coupling with microwave has been shown to have many advantages, such as high catalytic performance and stability. Our objective is to focus an up-to-date overview concerning the advances in the special microwave effects of the heterogeneous catalytic reactions including special thermal effect, microwave plasma, enhanced active groups, and the flexibility of structure. This review systematically states the action mechanism and some practical application of microwave-induced catalytic process. Finally, the potential research directions in the field of microwave-induced catalysis are prospected.

Microwaves and Heterogeneous Catalysis: A Review on Selected Catalytic Processes

Since the late 1980s, the scientific community has been attracted to microwave energy as an alternative method of heating, due to the advantages that this technology offers over conventional heating technologies. In fact, differently from these, the microwave heating mechanism is a volumetric process in which heat is generated within the material itself, and, consequently, it can be very rapid and selective. In this way, the microwave-susceptible material can absorb the energy embodied in the microwaves. Application of the microwave heating technique to a chemical process can lead to both a reduction in processing time as well as an increase in the production rate, which is obtained by enhancing the chemical reactions and results in energy saving. The synthesis and sintering of materials by means of microwave radiation has been used for more than 20 years, while, future challenges will be, among others, the development of processes that achieve lower greenhouse gas (e.g., CO2) emissions and discover novel energy-saving catalyzed reactions. A natural choice in such efforts would be the combination of catalysis and microwave radiation. The main aim of this review is to give an overview of microwave applications in the heterogeneous catalysis, including the preparation of catalysts, as well as explore some selected microwave assisted catalytic reactions. The review is divided into three principal topics: (i) introduction to microwave chemistry and microwave materials processing; (ii) description of the loss mechanisms and microwave-specific effects in heterogeneous catalysis; and (iii) applications of microwaves in some selected chemical processes, including the preparation of heterogeneous catalysts.

New versatile zincic sorbent for tobacco specific nitrosamines and lead ion capture

New carbon-doped ferric zinc oxide sorbents were fabricated to capture the environment carcinogen tobacco specific nitrosamines (TSNA) efficiently in solution, following new adsorption model of electrostatic attraction instead of traditional geometric constraints. The influence of ferric content on the structure-property of the sorbents was systemically studied with XRD, N2 adsorption-desorption and SEM methods combined with the adsorption of TSNA in different solutions. New sorbent captured 99% of 4-methylnitrosamino-1-3-pyridyl-1-butanone (NNK) in simulated surface water and 40% of TSNA in the tobacco extract solution, more than activated carbon or zeolites. Ferric ZnO sorbent took about 15 min to reach the adsorption equilibrium in the NNK or Pb(Ⅱ) solution, faster than NaZSM-5 zeolite. Moreover, the adsorbed NNK on ferric ZnO sorbent decomposed at mild conditions for the first time, providing a new way to control environment pollution.