Determination of Cyanide in Water and Food Samples Using an Efficient Naphthalene-Based Ratiometric Fluorescent Probe

Tailored fluorophore design: Enhancing selectivity for cyanide ion sensing in water and food samples, and innovative device development

A rigid fluorophore unit of Julolidine/coumarin fused with an indolium-conjugated system was built for the immediate and effective recognition of cyanide ions in a 90 % aq. DMSO solution. The probes are capable of displaying better sensitivity/selectivity for the cyanide ion over a wide range of other interfering ions. The probe JI showed an instant colorimetric variation, whereas the modified probe JCI showed both colorimetric and fluorimetric variation with cyanide ion. The observed detection limit values indicated excellent sensitivity of the probe to the cyanide ion. HRMS and 1H NMR studies confirmed that the mechanism of detection of CN- is via the nucleophilic attack on the electron-deficient indolium moiety of the molecule. Moreover, the probes are well proficient in selective recognition of cyanide in various real time applications (test strips, electronic sensor kit, food and water sample analysis).

Fluorescent Carbon Dots: Aggregation-Induced Emission Enhancement, Application as Probe for CN- and Cr2O7-2, Sensing Strips and Bio-imaging Agent

Fluorescent carbon dots (Trp-CDs) were prepared using tryptophan as precursor and were characterized on the basis of elemental analysis, powder-XRD, IR, Raman spectroscopy, 13C-NMR, UV-Vis, fluorescence and TEM. Trp-CDs exhibit poor fluorescence in 100% water but showed strong Aggregation Induced Emission (AIE) in ethanol and higher alcohols. The anion sensing study of Trp-CD revealed that it selectively detects CN- and Cr2O7-2 and from fluorescence quenching titration study, quenching constant, LOD and range of detection were evaluated. The emission life-time of Trp-CD before and after addition of CN- and Cr2O7-2 were measured, the decay curve before addition of anion was best fitted with a bi-exponential function with life-time of τ1 2.79 ns (10.74%) and τ2 18.93 ns (89.26%). The mechanistic study revealed that for CN-, the fluorescence quenching is due to its interaction with protons attached to surface functional groups and for Cr2O7-2, it is due to inner filter effect (IFE). Sensing strips were prepared by coating Trp-CDs onto various solid surfaces including agarose films and were used for detection of CN- and Cr2O7-. Trp-CD was found to be nontoxic and biocompatible and used as staining agent for Artemia and Bacteria (Bacillus Subtilis, Pseudomonas) and detection of CN- and Cr2O7-.

A Coumarin-Hemicyanine Deep Red Dye with a Large Stokes Shift for the Fluorescence Detection and Naked-Eye Recognition of Cyanide

In this study, we synthesized a coumarin-hemicyanine-based deep red fluorescent dye that exhibits an intramolecular charge transfer (ICT). The probe had a large Stokes shift of 287 nm and a large molar absorption coefficient (ε = 7.5 × 105 L·mol-1·cm-1) and is best described as a deep red luminescent fluorescent probe with λem = 667 nm. The color of probe W changed significantly when it encountered cyanide ions (CN-). The absorption peak (585 nm) decreased gradually, and the absorption peak (428 nm) increased gradually, so that cyanide (CN-) could be identified by the naked eye. Moreover, an obvious fluorescence change was evident before and after the reaction under irradiation using 365 nm UV light. The maximum emission peak (667 nm) decreased gradually, whilst the emission peak (495 nm) increased gradually, which allowed for the proportional fluorescence detection of cyanide (CN-). Using fluorescence spectrometry, the fluorescent probe W could linearly detect CN- over the concentration range of 1-9 μM (R2 = 9913, RSD = 0.534) with a detection limit of 0.24 μM. Using UV-Vis spectrophotometry, the linear detection range for CN- was found to be 1-27 μM (R2 = 0.99583, RSD = 0.675) with a detection limit of 0.13 μM. The sensing mechanism was confirmed by 1H NMR spectroscopic titrations, 13C NMR spectroscopy, X-ray crystallographic analysis and HRMS. The recognition and detection of CN- by probe W was characterized by a rapid response, high selectivity, and high sensitivity. Therefore, this probe provides a convenient, effective and economical method for synthesizing and detecting cyanide efficiently and sensitively.

A reaction-based carbazole-dicyanovinyl conjugated colorimetric and ratiometric fluorescent probe for selective detection of cyanide ions

In the present work, 4-(9'-hexylcarbazol-3'-yl)benzylidenemalononitrile 5 (probe L) was tested as a colorimetric and ratiometric fluorescent probe in dimethyl sulfoxide (DMSO) medium towards anions, cations and neutral molecules. The sensing properties of probe L were investigated by using UV-Vis absorption and fluorescence spectroscopy techniques. Probe L showed selectivity and sensitivity towards cyanide ions (CN-) in the presence of analytes used. Upon the addition of CN-, intramolecular charge transfer (ICT) band at 425 nm in UV spectrum disappeared. In addition, ICT emission intensity at 593 nm decreased and ligand-centred (LC) emission intensity at 480 nm increased. These findings indicate that nucleophilic conjugate addition of CN- to the dicyanovinyl group of probe L successfully occurs, hence forming a new adduct between probe L and CN-. In this adduct, π-conjugation was partially blocked, and the ICT transfer was hindered. Adduct formation was proved by Job's plot, 1H NMR and FT-IR analysis. Probe L showed very low limit of detection (LOD) value of 1.467 nM towards CN-. Probe L was also applied to the CN- detection in real-world water samples by the spike and recovery method. The maximum relative standard deviation (RSD) value was 4.24, indicating this method works successfully. Therefore, probe L could find a potential use in detection of CN- in liquid media.

Spectroscopic and TD-DFT studies on the chromo-fluorogenic detection of cyanide ions in organic and aquo-organic media

A new naked-eye chromogenic and fluorogenic probe KS5 has been developed for the detection of CN- ions in neat DMSO and H2O:DMSO (1:1 v/v) media. The probe KS5 exhibited selectivity towards CN- and F- ions in organic and high selectivity towards CN- ions in aquo-organic media resulting in a colour change from brown to colourless and a turn-on fluorescence response. The probe could able to detect CN- ions via a deprotonation process, which was conceived by consecutive addition of hydroxide and hydrogen ions and confirmed using 1H NMR studies. The limit of detection (LOD) of KS5 towards CN- ions were in the range of 0.07-0.62 µM in both these solvent systems. Suppression of intra-molecular charge transfer (ICT) transition and photoinduced electron transfer (PET) process of KS5 by the added CN- ions are responsible for the chromogenic and fluorogenic changes observed, respectively. Density Functional Theory (DFT) and Time-Dependent Density Functional Theory (TD-DFT) calculations strongly supported the proposed mechanism along with the optical properties of the probe before and after the addition of CN- ions. To prove the practical applicability, KS5 was successfully utilized to detect CN- ions in cassava powder and bitter almonds as well as to determine CN- ions in various real water samples.

Fluorophoresrich natural powder from selected medicinal plants for detection latent fingerprints and cyanide

Forensic science is currently fast-growing for the development detection of the latent fingerprint. Currently, chemical dust quickly enters the body through touch or inhalation and will be affected by the user. In this research, a study on the comparison of natural powder from four species of medicinal plants (Zingiber montanum, Solanum Indicum L., Rhinacanthus nasutus, and Euphorbia tirucall) for the detection of latent fingerprints is carried out that has fewer adverse effects on the user's body by using such natural substances instead. In addition, the fluorescence properties of the dust have been found in some natural powder for sample detection and appear on multi-colored surfaces to show that the latent fingerprints are more pronounced than ordinary dust. In this study, medicinal plants have also been applied to detect cyanide, as it has been known that it is hazardous for humans and can be used as a poisonous compound to kill someone. The characteristics of each powder have also been analyzed using naked-eye detection under UV light, Fluorescence spectrophotometer, FIB-SEM, and FTIR. All the powder obtained can then be used for high potential detection of latent fingerprints on the non-porous surface with their specific characteristics and trace amounts of cyanide using turn-on-off fluorescent sensing method.

Selective visualization of cyanide in food, living cells and zebrafish by a mitochondria targeted NIR-emitting fluorescent probe

Cyanide is a highly toxic substance, and the detection of cyanide in the environment and food samples is critical to public health care. Herein, we rationally designed a mitochondria-targeted near-infrared fluorescent probe BTC for ratiometric monitoring of CN^- in water, food, living cells, and zebrafish. BTC exhibits a remarkable colorimetric ratiometric fluorescence response to CN^- with high selectivity, low detection limit (54.3 nM), and large Stokes shift. The cyanide sensing mechanism was demonstrated by NMR and ESI-MS analysis and density functional theory (DFT). More importantly, BTC was used for efficient naked-eye colorimetric detection of CN^- in sprouting potatoes, almonds, and ginkgo fruit samples. Further, the BTC is capable of situ tracking and imaging cyanide in mitochondria of SMMC-7721 cells and in zebrafish via dual emission channels, and was prepared into a kit for convenient and visual on-site sensing of cyanide in food samples.

Recent advances in nanomaterials-based optical sensors for detection of various biomarkers (inorganic species, organic and biomolecules)

This review briefly emphasizes the different detection approaches (electrochemical sensors, chemiluminescence, surface-enhanced Raman scattering), functional nanostructure materials (quantum dots, metal nanoparticles, metal nanoclusters, magnetic nanomaterials, metal oxide nanoparticles, polymer-based nanomaterials, and carbonaceous nanomaterials) and detection mechanisms. Further, this review emphasis on the integration of functional nanomaterials with optical spectroscopic techniques for the identification of various biomarkers (nucleic acids, glucose, uric acid, oxytocin, dopamine, ascorbic acid, bilirubin, spermine, serotonin, thiocyanate, Pb²⁺ , Cu²⁺ , Hg²⁺ , F^- , peptides, and cancer biomarkers (mucin 1, prostate specific antigen, carcinoembryonic antigen, CA15-3, human epidermal growth factor receptor 2, C-reactive protein, and interleukin-6). Analytical characteristics of nanomaterials-based optical sensors are summarized in Tables, providing the insights of nanomaterials-based optical sensors for biomarkers detection. Finally, the opportunities and challenges of nanomaterials-based optical analytical approaches for the detection of various biomarkers (inorganic, organic, biomolecules, peptides and proteins) are discussed.

Benzoindoxazine derivatives containing carbazole for detection of CN- and its application in plant seed extracts and cell imaging

Cyanide (CN^-) is a highly toxic compound that exists in many substances and is harmful to the environment and human health. Therefore, it is of great significance to develop excellent CN^- ion probes, especially solvent-induced on-off fluorescent probes. Based on the condensation reaction of indolo[2,1-b][1,3]oxazine molecules with aldehydes, probes (E)-13a-(2-(9-ethyl-9H-carbazol-3-yl)vinyl)-14,14-dimethyl-10-nitro-13a,14-dihydro-8H-benzo[e]benzo[5,6][1,3]oxazino[3,2-a]indole (NCO) and (E)-13a-(2-(9-benzyl-9H-carbazol-3-yl)vinyl)-14,14-dimethyl-10-nitro-13a,14-dihydro-8H-benzo[e]benzo[5,6][1,3]oxazino[3,2-a]indole (NBO) were synthesized to detect CN^-. Compared with other cyanogen ion probes, NCO and NBO have special carbazole ring structures and large conjugate systems. When CN^- is added to the probe-detection solution, color changes that are visible to the naked eye can occur. The UV-vis spectrum test using differential spectroscopy shows that the probe (i) has excellent solvent-induced switching characteristics and stability (CH₃OH-H₂O) and (ii) high selectivity, anti-interference ability, and sensitivity for the detection of CN^-. The fluorescence limit of detections (LODs) are 1.05 µM for NCO and 1.34 µM for NBO. The UV LODs are 0.83 µM for NCO and 0.87 µM for NBO. Fluorescence spectroscopy shows that the probe has remarkable fluorescence properties. Fluorescence titration experiments, liver cancer cell (Hep G2) imaging, and cytotoxicity experiments all show that the probes have high biocompatibility, low toxicity, high cell permeability, and high sensitivity for the detection of CN^- in cells. In addition, NCO and NBO have been successfully used for the detection of cyanogenic glycosides in the seeds of ginkgo, crabapple, apple, and cherry. Test strips were fabricated to detect CN^-. After adding CN^-, the color of the test strip changed significantly-from brown to light yellow; thus, the test strips have a high application value in the fields of drug quality control, drug safety testing, and pharmacological research.

Analysis of cyanide using fluorogenic derivatization and capillary electrophoresis

Samples containing cyanide were incubated at 85 °C in the presence of the fluorogenic reagent 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ) and glutamic acid, and analyzed by capillary electrophoresis utilizing post-separation laser-induced fluorescence detection in a sheath flow cuvette. The separation time on a 25 cm long capillary at 800 Vcm^-1 was 3 min with the fluorescent product eluting at 107 s. Flushing of the capillary was not required between runs. Signal was proportional with cyanide concentration from 50 nM to 1.5 μM. LOD and LOQ were determined to be 26 and 87 nM respectively. As an application, free cyanide in five individual apple seeds was measured and found to range from 12 to 86 ng/mg, with a mean of 55 ± 32 ng/mg. As a means for the detection of amygdalin, cyanide was enzymatically produced from amygdalin using the enzymes β-glucosidase and mandelonitrile lyase. The cyanide was then reacted with FQ and injected onto the capillary. Amygdalin was detected at a concentration of 1 μM.

Rapid colorimetric discrimination of cyanide ions - mechanistic insights and applications

In this work, we have employed an intramolecular charge transfer-based DMN colorimetric probe for the rapid naked-eye detection of cyanide ions in solution as well as real water samples. The intermolecular interaction between the DMN probe and cyanide ions in solution was investigated using a combination of spectroscopic and computational methods in this study. The DMN probe exhibited a selective colorimetric response for cyanide ions over the other anions exposed. The cyanide sensing mechanism of the probe has been investigated by ¹H NMR titration and density functional theory calculations. The results reveal that the colorimetric response of the DMN probe is due to the Michael adduct formation in the β-conjugated position of the dicyanovinyl group with cyanide, which blocks intramolecular charge transfer transition. Under optimized experimental conditions, the DMN probe showed a linear plot in the concentration range of 0.01-0.25 μM, with a detection limit of 23 nM. Further, a 3D printed portable accessory for the smartphone and an open-source android application is developed to suit the DMN probe for on-site work. In addition, we have developed the microfluidic paper-based analytical device that could selectively detect cyanide ions at very low concentration using a colorimetric DMN probe. In addition, the DMN probe was effectively used to determine the cyanide ion in a variety of water samples.

Rosmarinic Acid-Capped Silver Nanoparticles for Colorimetric Detection of CN- and Redox-Modulated Surface Reaction-Aided Detection of Cr(VI) in Water

Rosmarinic acid-capped silver nanoparticles (Ro-AgNPs) were prepared and applied as a probe for selective colorimetric detection of cyanide (CN-) and chromium(VI) [Cr(VI)] under different conditions in aqueous media. The carbon atom of CN- interacts with the AgNPs, and the carbon atom donates electrons from the HOMO to the vacant orbitals of the coordinatively unsaturated surface atom (Ag0). After donating electrons, CN- attached onto the surface of the nanoparticles becomes very reactive and interacts with dissolved oxygen and generates reactive oxygen species (ROS) such as superoxide (O2 -), singlet oxygen (1O2), and so forth. In this process, Ag0 oxidizes to Ag+ and combines with CN- forming water-insoluble AgCN, and the ROS (O2 -) formed reacts with Ag/Ag+ to form Ag2O. The oxidation of Ag0 to Ag+ resulted in dissolution of AgNPs, which causes disappearance of the surface plasmon resonance band and color change from yellow to colorless. For detection of Cr(VI), ascorbic acid and CN- were added first; the ascorbic acid replaced the rosmarinic acid and then reduced the added Cr(VI) to Cr(III), and, in this process, ascorbic acid was oxidized to dehydroascorbic acid, which moved away from the nanoparticles' surface. CN- then interacted with the surface Ag0 atom, got activated, and interacted with dissolved oxygen forming Ag+ and ROS, which then followed the same process as described for CN- to form AgCN and Ag2O with a color change. The limits of detection were found to be 0.01 and 0.03 μM for CN- and Cr(VI), respectively. The material was also used for sensing CN- and Cr(VI) in real samples, and the results obtained were satisfactory. For field application, agarose-based strips were prepared by immobilizing the nanoparticles onto the agarose film and successfully used for the detection of CN- and Cr(VI) in water.

A water-soluble azobenzene-dicyano pendant polymeric chemosensor for the colorimetric detection of cyanide in 100% aqueous media and food samples

A polymeric chemosensor (P1) was developed for the colorimetric detection of cyanide in aqueous media and cyanogenic food samples.

Ppb-Level, Dual Channel Sensing of Cyanide and Bisulfate Ions in Aqueous Medium: Computational Rationalization of Ion-Dependent ICT Mechanism

In this report, three oxidized diindolylarylmethane (DIAM) based chromogenic probes (designated as 1, 2, and 3) have been developed for the simultaneous and dual-channel detection of cyanide (LOD: 6.2 ppb)...

A novel bifunctional chemosensor for bioimaging in living cells with highly sensitive colorimetric and fluorescence detection of CN− and Al3+

A novel colorimetric/fluorescent chemosensor (1o) was designed and synthesized for the detection of CN− and Al3+.

Discovery of a highly selective and ultra-sensitive colorimetric fluorescent probe for malononitrile and its applications in living cells and zebrafish

A selective and ultra-sensitive colorimetric fluorescent probe was discovered to detect malononitrile in living cells and zebrafish.

Magnetic mesoporous nanomaterials with AIE properties for selective detection and removal of CN- from water under magnetic conditions

We have prepared a type of magnetic mesoporous nanomaterial with aggregation-induced emission properties (Fe₃O₄@mSiO₂@TPA@BA, hence abbr. FSTB) to detect and remove cyanide ions (CN^-) under magnetic conditions. FSTB has a large specific surface area and improved fluorescence performance to identify CN^-, and its superparamagnetic behavior plays an important role in removing CN^-. The magnetic sensor FSTB shows excellent selectivity and anti-interference for the detection of CN^- in aqueous solutions. It is obvious from the equation LOD = 3δ/S that the limit of detection (LOD) of FSTB for CN^- is significantly lower than the permissible level of CN^- in drinkable water recommended by the World Health Organization. Therefore, the magnetic sensor FSTB has a wide range of applications for detecting and removing harmful CN^-.

Aggregation-Induced Emission-Based Material for Selective and Sensitive Recognition of Cyanide Anions in Solution and Biological Assays

Cyanide is one of the highly poisonous pollutants to our environment and toxic to human health. It is important to develop the widely applicable methods for their recognition to secure safe uses for people coming into contact and handling cyanide and their derivatives. In this regard, the aggregation-induced emission materials possess high potential for the development of simple, fast, and convenient methods for cyanide detection through either "turn-off" or "turn-on". Among the AIE-based materials, tetraphenylethylene is a promising sensor for various sensing applications. In this paper, we have designed and synthesized a TPE-based chemosensor, which shows high sensitivity and displays good selectivity for cyanide (CN-) over others in the presence of interfering Cl-, I-, F-, Br-, HSO4 -, H2PO4 -, NO3 -, HCO3 -, and ClO4 - anions employed. The naked-eye, UV-vis, and fluorescence methods are employed to evaluate the performance of probe 1 toward CN- detection. From these experiments, CN- ions can be detected with a limit of detection as low as 67 nM, which is comparatively lower than that of the World Health Organization (WHO) permissible limit of the cyanide anion, that is, 1.9 μM. From the Job's plot, the 1:1 stoichiometric complexation reaction between probe 1 and CN- was found. The probe was efficiently applied for the detection of CN- ions using a paper strip method. The probe 1 also showed the potential of detecting CN- ions in various food items and in the cell line.

A sensitive and selective BINOL based ratiometric fluorescence sensor for the detection of cyanide ions

A highly selective, novel BINOL based sensor BBCN has been developed for the fluorescent ratiometric detection of cyanide ions (CN⁻). The optical study revealed that BBCN exhibited unique spectral changes only with cyanide ions in the presence of other competing ions. Besides, an apparent fluorescent colour change from green to blue was observed. A clear linear relationship was observed between the fluorescence ratiometric ratio of BBCN and the concentration of CN⁻ with a reasonably low detection limit (LOD) of 189 nM (507 ppb). The optical response was due to the nucleophilic addition of CN⁻ to the dicyanovinyl group of the sensor, which compromises the probe's intramolecular charge transfer. This mechanism was well confirmed by Job's plot, ¹H-NMR and ESI-MS studies. BBCN showed immediate spectral response towards (1 second) CN⁻ and detection could be realized in a broad pH window. Furthermore, the practical utility of BBCN was studied by test paper-based analysis and the detection of CN⁻ in various water resources.

A highly selective, novel BINOL based sensor BBCN has been developed for the fluorescent ratiometric detection of cyanide ions (CN⁻).

A Simple Turn-off Schiff Base Fluorescent Sensor for Copper (II) Ion and Its Application in Water Analysis

An aniline-functionalized naphthalene dialdehyde Schiff base fluorescent probe L with aggregation-induced enhanced emission (AIEE) characteristics was synthesized via a simple one-step condensation reaction and exhibited excellent sensitivity and selectivity towards copper(II) ions in aqueous media with a fluorescence " turn-off " phenomenon. The detection limit of the probe is 1.64 × 10^-8 mol·L^-1. Furthermore, according to the results of the UV-vis/fluorescence titrations, Job's plot method and ¹H-NMR titrations, a 1:2 stoichiometry was identified. The binding constant between L and Cu²⁺ was calculated to be K_a = 1.222 × 10³. In addition, the AIEE fluorescent probe L could be applied to detection in real water samples with satisfactory recoveries in the range 99.10-102.90% in lake water and 98.49-102.37% in tap water.

Synergistic interaction of diclofenac and its metabolites with selected antibiotics and amygdalin in wastewaters

Diclofenac (DCF), a non-steroidal anti-inflammatory drug (NSAID) belongs to one of the most frequently detected pharmaceutical residues in the environment. Little is known on the interactions of DCF as well as its major biodegradation metabolites 4'-OHDCF and 5-OHDCF with chemical compounds found in wastewater, including antibiotics such as ampicillin and kanamycin. In the present work we examined the potential interactions between DCF, its metabolites 4'-OHDCF and 5-OHDCF and ampicyllin and kanamycin. We also measured the effect of the mixture of DCF with natural compound - amygdalin. We evaluated the following parameters: E. coli K-12 cells viability, growth inhibition of E. coli K-12 culture, genotoxicity, oxidative stress parameters: sodA promoter induction and ROS generation. The reactivity of E. coli SM recA:luxCDABE biosensor strain in wastewaters matrices contaminated with DCF and kanamycin was also monitored. Obtained results indicated that used antibiotics (ampicyllin, kanamycin) enhanced the toxic effect of DCF used individually and in the mixtures with its metabolites 4'-OHDCF and 5-OHDCF toward E. coli. Similar effect was also obtained in genotoxicity assay. The oxidative stress assays revealed that the highest level of ROS generation and sodA promoter induction were obtained also for the mixtures of DCF, its metabolites with antibiotics. It was also showed that amygdalin influenced the activity of DCF and its biodegradation metabolites. The strongest luminescence response of E. coli SM biosensor strain with recA:luxCDABE genetic construct in filtered treated wastewaters, comparable to control sample was noticed. Obtained results showed that DCF and its biodegradation metabolites 4'-OHDCF and 5-OHDCF can interact with tested antibiotics and compounds of natural origin, i.e. amygdalin to form mixtures showing stronger antimicrobial activity against E. coli than parent chemicals. Moreover the assays in wastewater matrices revealed that E. coli SM recA:luxCDABE biosensor strains is a good tool for bacteria monitoring in wastewater environments.

Pillar[5]arene-based supramolecular AIE hydrogel with white light emission for ultrasensitive detection and effective separation of multianalytes

A novel pillar[5]arene-based supramolecular AIE hydrogel (PDG) with white light emission was constructed. The PDG could be used for ultrasensitive detection and effective separation of multianalytes, and as fluorescent display materials.

Switching to a “turn-on” fluorescent probe for selective monitoring of cyanide in food samples and living systems

A “turn-on” fluorescent probe was designed by changing the structure of a “turn-off” probe for monitoring cyanide in food samples and living systems.