Exploring Colorimetric Real-Time Sensing Behavior of a Newly Designed CT Complex toward Nitrobenzene and Co2+: Spectrophotometric, DFT/TD-DFT, and Mechanistic Insights

Fluorenone-naphthyl encapsulated dual sensor for recognition of F- and Hg2+: Syngenetic effect with drug sobisis and molecular docking studies

A novel fluorenone-naphthyl pendant sensor (FTU) possessing thiourea functionality has been synthesized via a simple condensation method and utilized for the recognition of F- and Hg2+ ions in the solution of CH3CN. The addition of F- and Hg2+ ions to the FTU solution led to the appearance of red-shifted absorption bands at 340 and 315 nm, respectively. On the other hand, in the fluorescence spectrum, the two-fold decrease in fluorescence intensity of probe FTU was observed with F- ions; while complete quenching of the fluorescence intensity was noticed with Hg2+ ions at 423 nm. The limit of detection values of F- and Hg2+ ions were found to be 1.02 & 29.1 nM, respectively, measured by UV-vis studies and 0.0185 & 0.81 nM, respectively, measured by fluorescence studies, which are less than recommended by WHO. DFT computational assessments and 1H NMR titration experiments pointed to F- induced deprotonation of thiourea NH signals. However, the chelation-enhanced quenching effect (CHEQ) was held responsible for fluorescence quenching with Hg2+ addition. Moreover, the in-situ formed FTU + F- complex was utilized for secondary sensing of drug sobisis. Furthermore, the real-world applicability of sensor FTU has been successfully scrutinized for the recognition of F- ions in the toothpaste samples. In addition, molecular docking studies revealed that FTU exhibited excellent antibacterial potency towards different gram-positive as well as negative strains.

Efficient nanostructured Cs2CuBr2Cl2 perovskite as a fluorescent sensor for the selective "Switch Off" detection of nitrobenzene

Lead halide nanostructured perovskites are well known for their excellent photoluminescence and optoelectronic properties. However, lead toxicity and instability in moisture impedes its suitability for material use. Here we synthesized a highly efficient, lead free, economical, stable Cs2CuBr2Cl2 perovskite nanocrystals (PNCs) via Ligand Assisted Re-Precipitation (LARP) method which is less explored. The sensing application of the synthesized PNCs towards nitro explosives and other small organic compounds were studied. The probe exhibited high selectivity towards nitrobenzene with a lowest detection limit of 57.64 nM. The fluorescent emission intensity was drastically quenched upon the addition of 32 µM nitrobenzene. A Stern-Volmer plot was utilized for the quantification of fluorescence quenching. Further to investigate the quenching mechanism, time correlated single photon counting spectroscopy and other photoluminescence studies were performed pointing out the possibility of fluorescence resonance energy transfer. The work has been further extended to test the capability of the probe to detect nitrobenzene in real water samples and a good recovery percentage ranging from 93-98 % was obtained. Further, a paper strip assay was designed which successfully detected nitrobenzene and can be clearly noticed even with our naked eye making the probe an excellent sensor for nitrobenzene detection.

Optical Chemosensor as a Sensitive and Selective Tool for the Detection of Thiocyanate Ions Via Cu2+ Induced Sensor and Its Practical Application

In various fields, including analytical, environmental, and biochemistry, the detection of ions is significant. A simple probe, 3-(1-((4-aminophenyl)imino)ethyl)-4-hydroxy-6-methyl-2H-pyran-2-one (DPD), was designed for this study and used for the detection of Cu2+ ions in methanol, based on dehydroacetic acid and phenylenediamine moieties. Binding interactions studies were performed using UV-Vis measurements, which showed selective binding behaviour towards Cu2+ ions. The HRMS spectral data and Job's plot were used to check the stoichiometry ratio of 2:1 of a probe to Cu2+ ions. A detection limit of 1.38×10-7 M for Cu2+ ions was observed. Theoretical DFT calculations were used to determine the quantum parameters and the energy gap between frontier molecular orbitals. Interestingly, the DPD-Cu2+ complex acted as a probe for the detection of SCN- ions at a low LOD value, i.e., 1.97×10-7 M. A novel incidence of reversibility with SCN- ions was reported using the HRMS technique. Next, real water and blood samples were used, and the concentration of Cu2+ ions was calculated to further analyse the practical applicability of the probe. The DPD probe showed better selectivity and sensitivity than previously reported sensors, especially in complex matrices, where other sensors frequently experience interference and detection limit issues, indicating its potential as an advanced tool for ion detection in various applications.

Recent Progress Toward Electrocatalytic Conversion of Nitrobenzene

Despite that extensive efforts have been dedicated to the search for advanced catalysts to boost the electrocatalytic nitrobenzene reduction reaction (eNBRR), its progress is severely hampered by the limited understanding of the relationship between catalyst structure and its catalytic performance. Herein, this review aims to bridge such a gap by first analyzing the eNBRR pathway to present the main influential factors, such as electrolyte feature, applied potential, and catalyst structure. Then, the recent advancements in catalyst design for eNBRR are comprehensively summarized, particularly about the impacts of chemical composition, morphology, and crystal facets on regulating the local microenvironment, electron and mass transport for boosting catalytic performance. Finally, the future research of eNBRR is also proposed from the perspectives of performance enhancement, expansion of product scope, in-depth understanding of the reaction mechanism, and acceleration of the industrialization process through the integration of upstream and downstream technologies.

A Series of Lanthanide Coordination Polymers as Luminescent Sensors for Selective Detection of Inorganic Ions and Nitrobenzene

Seven new lanthanide coordination polymers, namely [Ln(cpt)3H2O)]n(Ln = La (1), Pr (2), Sm (3), Eu (4), Gd (5), Dy (6), and Er (7)), which were synthesized under hydrothermal conditions using 4'-(4-(4-carboxyphenyloxy)phenyl)-4,2':6',4'-tripyridine (Hcpt) as the ligand. The crystal structures of these seven complexes were determined using single-crystal X-ray diffraction, and they were found to be isostructural, crystallizing in the triclinic P1- space group. The Ln(III) ions were nine-coordinated with tricapped trigonal prism coordination geometry. The Ln(III) cations were coordinated by carboxylic and pyridine groups from (cpt)- ligands, forming one-dimensional ring-chain structures. Furthermore, the luminescent properties of complexes 1-7 were investigated using fluorescent spectra in the solid state. The fluorescence sensing experiments demonstrated that complex 4 exhibits high selectivity and sensitivity for detecting Co2+, Cu2+ ions, and nitrobenzene. Moreover, complex 3 shows good capability for detecting Cu2+ ions and nitrobenzene. Additionally, the sensing mechanism was also thoroughly examined through theoretical calculations.

Highly Sensitive Fluorescent Sensing for Nitrobenzene of CdII Complexes Based on Three Isomers and a Bis-Imidazole Ligand

Detection of nitro pollutants is an important topic in environmental protection. A total of 3 Cd (II) complexes (1-3) based on 3 soft organic isomers, n-(3,5-dicarboxylato benzyloxy) benzoic acid (n = 2, 3 or 4-H3DBB), and a linear N-donor ligand, 3-bis(imidazole-l-ylmethyl) benzene (3-bibz), have been synthesized hydrothermally. Structural diversity of Complexes 1-3 displays the architectural 2D or 3D change: Complex 1 exhibits a 2D network featuring tri-nuclear metal units, Complex 2 is a 3D framework based on similar tri-nuclear metal units, and Complex 3 shows a 3D network with binuclear units. Fluorescent sensing properties exhibited in all these complexes have been discovered to detect nitrobenzene (NB) selectively and sensitively. In particular, Complex 3 possesses high sensitivity for NB with the lowest detection limit of 1.15 × 10-10 M. The results of the theoretical calculation verified the fluorescence detection mechanism of NB by these Cd-based complexes. Therefore, these Cd-based complexes might be used as excellent luminescent sensors for NB.

Design and characterization of a binary CT complex of imidazole-oxyresveratrol: exploring its pharmacological and computational aspects

A new binary charge transfer (CT) complex between imidazole (IMZ) and oxyresveratrol (OXA) was synthesized and characterized experimentally and theoretically. The experimental work was carried out in solution and solid state in selected solvents such as chloroform (CHL), methanol (Me-OH), ethanol (Et-OH), and acetonitrile (AN). The newly synthesized CT complex (D1) has been characterized by various techniques such as UV-visible spectroscopy, FTIR, 1H-NMR, and powder-XRD. The 1:1 composition of D1 is confirmed by Jobs' method of continuous variation and spectrophotometric (at λmax 554 nm) methods at 298 K. The infrared spectra of D1 confirmed the existence of proton transfer hydrogen bond beside charge transfer interaction. These findings indicate that the cation and anion are joined together by the weak hydrogen bonding as N+-H-O-. Reactivity parameters strongly recommended that IMZ behaves as a good electron donor and OXA an efficient electron acceptor. Density functional theory (DFT) computations with basis set B3LYP/6-31G (d,p) was applied to support the experimental results. TD-DFT calculations gives HOMO (-5.12 eV) → LUMO (-1.14 eV) electronic energy gap (Δ E ) to be 3.80 eV. The bioorganic chemistry of D1 was well established after antioxidant, antimicrobial, and toxicity screening in Wistar rat. The type of interactions between HSA and D1 at the molecular level was studied through fluorescence spectroscopy. Binding constant along with the type of quenching mechanism, was investigated through the Stern-Volmer equation. Molecular docking demonstrated that D1 binds perfectly with human serum albumin and EGFR (1M17) and exposes free energy of binding (FEB) values of -295.2 and -283.3 kcal/mol, respectively. The D1 fits successfully into the minor groove of HAS and 1M17, the results of molecular docking show that the D1 binds perfectly with the HAS and 1M17, the higher value of binding energy shows stronger interaction between HAS and 1M17 with D1. Our synthesized complex shows good binding results with HAS compared to 1M17.Communicated by Ramaswamy H. Sarma.

Design, synthesis, characterizing and DFT calculations of a binary CT complex co-crystal of bioactive moieties in different polar solvents to investigate its pharmacological activity

Imidazole (IM) and salicylic acid (SA) have a significant class among the medical compound. These are widely used as topical drugs like antifungal, antibacterial, anticancer, immunosuppressive agent, etc. These two bioactive organic moieties are combined by a weak hydrogen bond formed by hydrogen transfer. The charge transfer (CT) complex of acceptor (SA) and donor (IM), has been synthesized at room temperature in methanol and confirmed by signal-crystal XRD, conductance and UV-visible spectroscopy. The X-ray crystallography provides the original structural information of CT complex and displays the existence of N+-H--O- bond between IM and SA. The physical properties such as (ECT), (RN), (ID), (f), (D) and (Δ G0) along with molar extinction coefficient (εCT) and formation constant (KCT) were estimated through UV-visible spectroscopy. Job's method and Benesi-Hildebrand equation suggested 1:1 stoichiometry of ([IM]+[SA]-). The results indicate a complete transfer of hydrogen atom and CT complex formation with 1:1 molar ratio of IM and SA. Antimicrobial activity was veiled against different bacteria like Escherichia coli, Bacillus subtilis and Staphylococcus aureus; and different fungi as Fusarium oxysporum, Candida albicans and Aspergillus niger by disc diffusion method. CT complex was also tested for cytotoxic activity against lung cancer cell lines in comparison to breast cancer cell lines. Molecular docking provides the information of binding of [(IM)+(SA)-] with the cancer marker (1M17), which has substantial application for drug designing. The investigational studies were supplemented through time-dependent density functional theory (TD-DFT) using basis set B3LYP/6-311G**. Through DFT calculations, HOMO→LUMO electronic energy gap (Δ E ) was obtained.

A pyridine modified naphthol hydrazone Schiff base chemosensor for Al3+ via intramolecular charge transfer process

A pyridine modified naphthol hydrazone Schiff base chemosensor, NaPy, was prepared in a two-step process to detect aluminum ion (Al3+) in different samples. The probe shows a turn-off emission response towards Al3+ at a 1:1 binding stoichiometry via intramolecular charge transfer (ICT) mechanism, as validated by density functional theory (DFT) calculations and a series of spectroscopic measurements. The response time is slightly over one minute with a limit of detection (LOD) value of 0.164 µM, demonstrating the great sensitivity of the probe. It is also found that NaPy exhibits high selectivity towards Al3+ and resists interference from seventeen other cations. Application investigations in paper strips, water samples and HeLa cells suggest that NaPy can be used as an efficient probe for sensing Al3+ in real environmental samples and biosystems.

Synthesis, spectrophotometric, pharmacology and theoretical investigation of a new electron transfer complex of 8-hydroxyquinoline with oxalic acid in different polar solvents

Preparation, characterization, and investigation of a novel organic charge transfer (CT) complex were carried out, with a focus on exploring its antibacterial and antifungal characteristics. Theoretical analysis backs up the experimental findings. CT complex formed was synthesized between 8-hydroxyquinoline (8HQ) and oxalic acid (OA) at RT (room temperature). Different analyses were used to describe the CT complex, including 1H-NMR, FTIR, TGA/DTA, and UV-vis spectra (in different solvents). These indicate that the CT interaction is linked to proton transfer from OA to 8HQ and the subsequent development of 'N+__H…O-" type bonding. On the basis of wave number, the CT complex and reactants are distinguished in FTIR spectra. By using Thermo gravimetric Analysis/Differential Thermal Analysis (TGA/DTA) tests, the thermal stability of complicated and thorough corrosion was examined. Through UV-visible spectroscopy, physical characteristics like ECT (interaction energy), RN (resonance energy), ID (ionization potential), f (oscillator strength) and ΔG (free energy) were calculated. The εCT (molar extinction coefficient), the KCT (formation constant), and additional physical properties of this complex were calculated by the Benesi-Hildebrand equation in order to determine its 1:1 stoichiometry. The biological properties are also supported by theoretical study. The protein, Human Serum Albumin (HSA), is observed to bind with CT complex, as shown by molecular docking and the observed binding energy value is -167.04 kcal/mol. Molecular dynamics (MD) simulation 100 ns run was used to refine docking results and binding free energy was calculated using MM-PBSA. This study introduces a novel CT complex, offering fresh perspectives on molecular interactions.Communicated by Ramaswamy H. Sarma.

Synthesis and characterization of a novel Mannich base benzimidazole derivative to explore interaction with human serum albumin and antimicrobial property: experimental and theoretical approach

The novel Mannich base benzimidazole derivative (CB-1), 1-((1H-benzo[d]imidazol-1-yl)(3-chlorophenyl)methyl)-3-phenylurea) has been designed and synthesized by reacting benzimidazole, 3-chloro benzaldehyde, and N-Phenyl urea. CB-1 has been characterized by UV- Visible, FTIR, and 1H NMR. CB-1 was explored to study the interaction with the most abundant blood protein which involved in the role of transport of molecules (drugs), human serum albumin (HSA). Fluorescence results are evident for the presence of both dynamic and static quenching mechanisms in the binding of CB-1 to HSA. Antimicrobial screening were carried out against three bacteria and three fungi pathogens employing disc diffusion method. Molecular docking using AutoDock Vina tool further confirms the experimental binding interactions obtained from fluorescence. Density functional theory (DFT) with B3LYP/6-311G++ basis set was used for correlating theoretical data and obtaining optimized structures of CB-1 along with reactants with molecular electrostatic potential (MEP) map and HOMO→LUMO energy gap calculation. HIGHLIGHTSThe novel Mannich base benzimidazole derivative (CB-1) has been designed and synthesized by Mannich reaction.CB-1 has been characterized by UV- Visible, FTIR, and 1H NMR.Fluorescence quenching reveals that HSA binds to CB-1 via aromatic residues, which is corroborated by molecular docking.Antifungal and antibacterial activity was evaluated in comparison to Nystatin and Gentamicin standard drugs, respectively.DFT calculations support experimental data and provide HOMO-LUMO energy gap.Communicated by Ramaswamy H. Sarma.

A smartphone-based colorimetric assay using Au@Ag core-shell nanoparticles as the nanoprobes for visual tracing of fluvoxamine in biofluids as a common suicide drug

In the present study, bimetallic nanoparticles (NPs) consisting of gold (AuNPs) as the core and silver (AgNPs) as the shell have been synthesized and applied as the nanoprobe for detection of fluvoxamine (FXM) as the anti-depression drug. The physicochemical properties of the prepared citrate-capped Au@Ag core-shell NPs have been characterized by UV-Vis, Fourier-transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) techniques. The design of the smartphone-based colorimetric FXM sensor relies on the fast hydrolysis of FXM under alkaline conditions by producing of 2-(Aminooxy)ethanamine without any significant peak at 400-700 nm. The interaction of the resulted molecule with the nanoprobe induced a red shift in the longitudinal localized surface plasmon resonance (LSPR) peak of the nanoprobe, which was accompanied by sharp and vivid color variations in the solution. A linear relationship between the absorption signal increasing by FXM concentration increasing from 1 µM to 10 µM presented a simple, low cost and minimally instrumented format for FXM quantification with a limit of detection (LOD) of 100 nM. The collected visual data with the elegant colorimetric response of the nanoprobe in the presence of FXM from Indian red to light red violet and bluish-purple color offered simple detection of FXM with the naked eye. The satisfactory results of the proposed cost-effective sensor in the rapid assay of FXM in human serum, urine, saliva and pharmaceutical samples guarantee the potential of the nanoprobe for on-site and visual determination of FXM in actual samples. The proposed sensor as the first non-invasive FXM sensor for saliva sample analysis may hold great promise to provide the technical support for the rapid and valid detection of FXM for forensic medicine and clinical organizations.

Magnetically recoverable Fe3O4 nanocatalyst for the synthesis of biodynamically significant 1H-pyrazolo[1,2-b]phthalazine-5,10-diones derivatives and its DFT study

An environmentally sustainable and proficient method is reported for the synthesis of medicinally important pyrazolo[1,2-b] phthalazine dione derivatives by aqueous micellar medium catalysed by Fe3O4 NPs. Dialkyl acetylenedicarboxylate with isocyanides in the presence of phthalhydrazide is used as starting material. The main advantages of this protocol are the availability of starting materials, short reaction times, green solvents and practical simplicity.

Synthesis, Characterization, Antimicrobial, Density Functional Theory, and Molecular Docking Studies of Novel Mn(II), Fe(III), and Cr(III) Complexes Incorporating 4-(2-Hydroxyphenyl azo)-1-naphthol (Az)

This work synthesized three new CrAz₂, MnAz₂, and FeAz₂ complexes and investigated them using IR, mass, UV spectroscopy, elemental analysis, conductivity and magnetic tests, and thermogravimetric analysis. The azo-ligand, 4-(2-hydroxyphenylAzo)-1-naphthol (Az), couples with metal ions via its nitrogen (in -N=N- bonds) and oxygen (in hydroxyl group) atoms, according to the IR spectra of these complexes. Through thermal examination (TG/TGA), the number and location of water in the complexes were also determined. Density functional theory (DFT) theory is applied to ameliorate the structures of the ligand (Az) and metal complexes and analyze the quantum chemical characteristics of these complexes. The antifungal and antibacterial activity of the ligand and its complexes opposed to several hazardous bacteria and fungi was investigated in vitro. Metal complexes were discovered to have a higher inhibitory impact on some organisms than the free ligand. The MnAz₂ complex exhibited the best activity among the studied materials, whereas the CrAz₂ complex had the lowest. The compounds' binding affinity to the E. coli (PDB ID: 1hnj) structure was predicted using molecular docking. Binding energies were calculated by analyzing protein-substrate interactions. These encouraging findings imply that these chemicals may have physiological effects and may be valuable for a variety of medical uses in the future.

Protective effect of the newly synthesized and characterized charge transfer (CT) complex against arecoline induced toxicity in third-instar larvae of transgenic Drosophila melanogaster (hsp70-lacZ)Bg9: experimental and theoretical mechanistic insights

Agents that suppress the toxic effect of arecoline (a chemical present in the Areca nut fruit) have become a need of the hour owing to its several harmful effects on human beings. Although some drug molecules have been developed for this purpose, yet, simple, easy to prepare, and economical molecules with remarkable potency are still a challenge to design. The present work thus becomes important as it involves the synthesis of a new charge transfer complex (CTC) material, which has, for the first time, been screened to investigate its effect on the toxic effects of arecoline. The newly designed material (CL), which is generated from the reaction between 2,4,6-trinitrophenol (TNP) and pyrazole (PYZ), has been crystallized by a slow evaporation method and characterized by employing spectral studies including single crystal X-ray crystallography. Spectrophotometry studies with the inclusion of the Benesi-Hildebrand equation reveal 1 : 1 stoichiometry and physical parameters of CL. Assays were used for determining the protective effect of CL against arecoline. CL was found to (dose-dependently) decrease β-galactosidase activity, damage in tissue and DNA damage caused by arecoline (80 μM) in the third-instar larvae of the transgenic Drosophila melanogaster (hsp70-lacZ)Bg⁹. The possible mechanism of this effect was explored through fluorescence and UV-vis spectroscopy. The possibility of suppression of arecoline action on the muscarinic acetylcholine receptor 1-G11 protein complex (found in the cell membrane) in the presence of CL was studied theoretically by molecular docking. Density functional theory (DFT) also theoretically supported various aspects of the designed material concerning the energy profile of the orbitals (HOMO-LUMO) as well as the energy minimized structure. Furthermore, time dependent (TD) DFT corroborated the electronic properties of the designed material.

Synthesis, spectroscopic characterization, antimicrobial activity, molecular docking and DFT studies of proton transfer (H-bonded) complex of 8-aminoquinoline (donor) with chloranilic acid (acceptor)

The proton transfer complex has been synthesized by mixing 1:1 ratio of 8-aminoquinoline (donor) and chloranilic acid (acceptor) in methanol. FTIR, ¹³C NMR, ¹H NMR, Powder XRD and UV-visible studies confirmed the formation of the newly synthesized compound. These methods ascertain that cations and anions combine to form weak hydrogen bonds as N⁺-H----O^-. The physical properties such as energy of interaction (E_CT), resonating energy (R_N), Ionization potential (I_D), and oscillator strength (f), transition dipole strength (D) and free energy (Δ G) were estimated through UV-visible spectroscopy. The thermal stability of this complex and extensive erosion was analyzed by TGA/DTA study. Benesi-Hildebrand equation was used to determine 1:1 stoichiometry of this complex and to calculate the molar extinction coefficient (ε_CT), the formation constant (K_CT) and other physical parameters. The nature of transfer of charge relations plays a vital role in chemistry and in biological systems. The synthesized proton transfer complex has been screened for antibacterial activities against different bacteria and antifungal activities against different fungi. The proton transfer complex also displays outstanding interaction with the human protein (globulin) protein. The DFT calculations by B3LYP/6-311G** basis set gave theoretical establishment and HOMO (-5.468 eV) to LUMO (-3.328 eV) electronic energy gap (ΔE) as 2.140 eV. Theoretical analysis proves the biological characteristics as well. Molecular docking displays that CT complex is fully bound to the protein and determines the free binding energy value of -290.18 kcal/mol (FEB).A new organic charge transfer complex has been prepared, characterized and explored for antibacterial, antifungal and protein binding properties. The experimental results are supported by theoretical analysis.Communicated by Ramaswamy H. Sarma.

One-pot synthesis, molecular docking, ADMET, and DFT studies of novel pyrazolines as promising SARS-CoV-2 main protease inhibitors

Pyrazoline and its derivatives have numerous prominent pharmacological effects. Focusing on its anti-viral property, we have designed and synthesized three novel pyrazoline derivatives (A1–A3) through one-pot three components and characterized them using different spectroscopic techniques (FT-IR, ¹H NMR, ¹³C NMR, and UV). These compounds were evaluated against SARS-CoV-2 main protease utilizing in-silico molecular docking studies. The docking results displayed good inhibitory activity of the synthesized compounds. Among them, compound A2 was the most active against targeted protein. The drug-likeness and ADMET properties were predicted to have varied profiles but could still be developed, especially A2. DFT/TD-DFT calculations through B3LYP/6-311G++ level of theory were applied to provide comparable theoretical data along with MEP map and electronic energy gap of HOMO → LUMO.

Multispectral and Molecular Docking Studies Reveal Potential Effectiveness of Antidepressant Fluoxetine by Forming π-Acceptor Complexes

Poor mood, lack of pleasure, reduced focus, remorse, unpleasant thoughts, and sleep difficulties are all symptoms of depression. The only approved treatment for children and adolescents with major depressive disorder (MDD) is fluoxetine hydrochloride (FXN), a serotonin selective reuptake inhibitor antidepressant. MDD is the most common cause of disability worldwide. In the present research, picric acid (PA); dinitrobenzene; p-nitro benzoic acid; 2,6-dichloroquinone-4-chloroimide; 2,6-dibromoquinone-4-chloroimide; and 7,7′,8,8′-tetracyanoquinodimethane were used to make 1:1 FXN charge-transfer compounds in solid and liquid forms. The isolated complexes were then characterized by elemental analysis, conductivity, infrared, Raman, and ¹H-NMR spectra, thermogravimetric analysis, scanning electron microscopy, and X-ray powder diffraction. Additionally, a molecular docking investigation was conducted on the donor moiety using FXN alone and the resulting charge transfer complex [(FXN)(PA)] as an acceptor to examine the interactions against two protein receptors (serotonin or dopamine). Interestingly, the [(FXN)(PA)] complex binds to both serotonin and dopamine more effectively than the FXN drug alone. Furthermore, [(FXN)(PA)]–serotonin had a greater binding energy than [FXN]–serotonin. Theoretical data were also generated by density functional theory simulations, which aided the molecular geometry investigation and could be beneficial to researchers in the future.

Spectroscopic and Molecular Docking Studies of Cu(II), Ni(II), Co(II), and Mn(II) Complexes with Anticonvulsant Therapeutic Agent Gabapentin

New Cu(II), Ni(II), Co(II), and Mn(II) complexes of the gabapentin (Gpn) bidentate drug ligand were synthesized and studied using elemental analyses, melting temperatures, molar conductivity, UV–Vis, magnetic measurements, FTIR, and surface morphology (scanning (SEM) and transmission (TEM) electron microscopes).The gabapentin ligand was shown to form monobasic metal:ligand (1:1) stoichiometry complexes with the metal ions Cu(II), Ni(II), Co(II), and Mn(II). Molar conductance measurements in dimethyl-sulfoxide solvent with a concentration of 10⁻³ M correlated to a non-electrolytic character for all of the produced complexes. A deformed octahedral environment was proposed for all metal complexes. Through the nitrogen atom of the –NH₂ group and the oxygen atom of the carboxylate group, the Gpn drug chelated as a bidentate ligand toward the Mn²⁺, Co²⁺, Ni²⁺, and Cu²⁺ metal ions. This coordination behavior was validated by spectroscopic, magnetic, and electronic spectra using the formulas of the [M(Gpn)(H₂O)₃(Cl)]·nH₂O complexes (where n = 2–6).Transmission electron microscopy was used to examine the nanostructure of the produced gabapentin complexes. Molecular docking was utilized to investigate the comparative interaction between the Gpn drug and its four metal [Cu(II), Ni(II), Co(II), and Mn(II)] complexes as ligands using serotonin (6BQH) and dopamine (6CM4) receptors. AutoDock Vina results were further refined through molecular dynamics simulation, and molecular processes for receptor–ligand interactions were also studied. The B3LYP level of theory and LanL2DZ basis set was used for DFT (density functional theory) studies. The optimized geometries, along with the MEP map and HOMO → LUMO of the metal complexes, were studied.

Charge transfer complexes: Emerging and promising colorimetric real-time chemosensors for hazardous materials

After introducing the concept of charge transfer (CT) complex formation by Mulliken and the discovery of crystalline picrate (association of picric acid and aromatic hydrocarbons) by Fritzsches, a large interest has been drawn in this field. CT complexes have been explored and exploited for different applications for several decades. The research has been aimed mostly for discovering and characterizing new CT materials and exploring applications mainly in the field of optoelectronic properties, antimicrobial activities and DNA/protein binding properties for the last six years. However, nowadays, CT complexes are exploited for their photocatalytic activities and designing chemosensors for the colorimetric real-time detection of hazardous materials like nitro explosives, anions and toxic heavy metal ions in an aqueous medium. This review sheds light on updates on CT complexes, their types, synthesis and applications. The brief discussion on the emergence of CT complexes as highly potential chemosensors along with the explanation of sensing mechanism through article summarization is the centerpiece of this review. The final outcomes are discussed and concluded.

A colorimetric chemosensor for pyrophosphate based on mono-pyrenylurea in aqueous media

Research on pyrophosphate ions detection remains important because it plays crucial roles in various fields. A simple and new colorimetric sensor for pyrophosphate (PPi) based on mono-pyrenylurea ligand (L) has been designed and synthesized by a simple reaction of 1-pyrenemethylamine hydrochloride with p-nitrophenylisocyanate. In DMSO-15% H₂O solution and DMSO-15% HEPES (10 mM, pH = 7.2) buffer solution, L displayed a selective colorimetric response for pyrophosphate (PPi) against other anions by changing color from colorless to yellow. This recognition process was confirmed by UV-vis spectroscopy. Also, the colorimetric properties of L are attributed to the anion-induced deprotonation of the urea subunit as demonstrated by ¹H NMR titration method. Moreover, convenient test strips coated with L could be utilized to detect PPi in aqueous solution by naked-eye.

Synthesis, characterization, antimicrobial and DNA binding properties of an organic charge transfer complex obtained from pyrazole and chloranilic acid

The chemistry of an organic charge transfer complex (CT complex) between pyrazole (donor) and chloranilic acid (acceptor) has been explored in ethanol at room temperature. The synthesized complex has been characterized by various techniques such as FTIR, NMR, Single crystal X-ray diffraction and UV-visible spectroscopy. These techniques indicate that the cation and anion are joined together by the weak hydrogen bonding. This molecular framework is a result of inter N⁺-H⋯O^- bonding between donor and acceptor moieties. The elemental analysis and FTIR spectrum of semi-crystal complex along with Job's plot indicate the formation of 2: 1 HBCT-complex. The bioorganic chemistry of the present CT complex is established well toward antimicrobial screening and DNA binding capabilities. Antimicrobial activity was screened for gram positive and gram negative bacteria and various fungi. Molecular docking shows that the CT complex binds perfectly with the B-DNA and reveals free energy of binding (FEB) value of -198.4 kcal mol^-1. TD-DFT calculations using basis set B3LYP/6-311G^** give theoretical confirmation along with HOMO (-3.9421 eV) → LUMO (-2.4903 eV) electronic energy gap (ΔE) to be 1.4521 eV. Theoretical analysis corroborates well the biological properties.

Multi-functional lanthanide-CPs based on tricarboxylphenyl terpyridyl ligand as ratiometric luminescent thermometer and highly sensitive ion sensor with turn on/off effect

The binary compound Ln-CP Tb_0.897Eu_0.103tcptpy has been developed as a ratiometric luminescent thermometer. Its relative sensitivity can reach up to 8.41% K⁻¹ in the 305 to 340 K range.

Electron-transfer complexation of morpholine donor molecule with some π – acceptors: Synthesis and spectroscopic characterizations

Morpholine is an interesting moiety that used widely in several organic syntheses. The intermolecular charge-transfer (CT) complexity associated between morpholine (Morp) donor with (monoiodobromide “IBr”, 2,3-dichloro-5,6-dicyano-1,4-benzoquinone “DDQ”, 2,6-dichloroquinone-4-chloroimide “DCQ” and 2,6-dibromoquinone-4-chloroimide “DBQ”) π–acceptors have been spectrophotometrically investigated in CHCl3 and/or MeOH solvents. The structures of the intermolecular charge-transfer (CT) were elucidated by spectroscopic methods like, infrared spectroscopy. Also, different analyses techniques such as UV-Vis and elemental analyses were performed to characterize the four morpholine [(Morp)(IBr)], [(Morp)(DDQ)], [(Morp)(DCQ)] and [(Morp)(DBQ)] CT-complexes which reveals that the stoichiometry of the reactions is 1:1. The modified Benesi-Hildebrand equation was utilized to determine the physical spectroscopic parameters such as association constant (K) and the molar extinction coefficient (ε).