1
|
Biswas B, Sakhakarmy M, Rahman T, Jahromi H, Adhikari S, Krishna BB, Bhaskar T, Baltrusaitis J, Eisa M, Kouzehkanan SMT, Oh TS. Selective production of phenolic monomer via catalytic depolymerization of lignin over cobalt-nickel-zirconium dioxide catalyst. BIORESOURCE TECHNOLOGY 2024; 398:130517. [PMID: 38437961 DOI: 10.1016/j.biortech.2024.130517] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/14/2023] [Revised: 02/28/2024] [Accepted: 02/29/2024] [Indexed: 03/06/2024]
Abstract
The utilization of lignin, an abundant and renewable bio-aromatic source, is of significant importance. In this study, lignin oxidation was examined at different temperatures with zirconium oxide (ZrO2)-supported nickel (Ni), cobalt (Co) and bimetallic Ni-Co metal catalysts under different solvents and oxygen pressure. Non-catalytic oxidation reaction produced maximum bio-oil (35.3 wt%), while catalytic oxidation significantly increased the bio-oil yield. The bimetallic catalyst Ni-Co/ZrO2 produced the highest bio-oil yield (67.4 wt%) compared to the monometallic catalyst Ni/ZrO2 (59.3 wt%) and Co/ZrO2 (54.0 wt%). The selectively higher percentage of vanillin, 2-methoxy phenol, acetovanillone, acetosyringone and vanillic acid compounds are found in the catalytic bio-oil. Moreover, it has been observed that the bimetallic Co-Ni/ZrO2 produced a higher amount of vanillin (43.7% and 13.30 wt%) compound. These results demonstrate that the bimetallic Ni-Co/ZrO2 catalyst promotes the selective cleavage of the ether β-O-4 bond in lignin, leading to a higher yield of phenolic monomer compounds.
Collapse
Affiliation(s)
- Bijoy Biswas
- Biosystems Engineering Department, 200 Corley Building, Auburn University, Auburn, AL 36849, USA
| | - Manish Sakhakarmy
- Biosystems Engineering Department, 200 Corley Building, Auburn University, Auburn, AL 36849, USA
| | - Tawsif Rahman
- Biosystems Engineering Department, 200 Corley Building, Auburn University, Auburn, AL 36849, USA
| | - Hossein Jahromi
- Biosystems Engineering Department, 200 Corley Building, Auburn University, Auburn, AL 36849, USA
| | - Sushil Adhikari
- Biosystems Engineering Department, 200 Corley Building, Auburn University, Auburn, AL 36849, USA.
| | - Bhavya B Krishna
- Material Resource Efficiency Division (MRED), CSIR-Indian Institute of Petroleum (IIP), Dehradun 248005, India
| | - Thallada Bhaskar
- Material Resource Efficiency Division (MRED), CSIR-Indian Institute of Petroleum (IIP), Dehradun 248005, India
| | - Jonas Baltrusaitis
- Department of Chemical and Biomolecular Engineering, Lehigh University, Pennsylvania 18015, USA
| | - Mohamed Eisa
- Department of Chemical and Biomolecular Engineering, Lehigh University, Pennsylvania 18015, USA
| | | | - Tae-Sik Oh
- Department of Chemical Engineering, Auburn University, Auburn, AL 36849, USA
| |
Collapse
|
2
|
Naeem M, Imran M, Latif S, Ashraf A, Hussain N, Boczkaj G, Smułek W, Jesionowski T, Bilal M. Multifunctional catalyst-assisted sustainable reformation of lignocellulosic biomass into environmentally friendly biofuel and value-added chemicals. CHEMOSPHERE 2023; 330:138633. [PMID: 37030343 DOI: 10.1016/j.chemosphere.2023.138633] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/22/2022] [Revised: 04/04/2023] [Accepted: 04/05/2023] [Indexed: 05/14/2023]
Abstract
Rapid urbanization is increasing the world's energy demand, making it necessary to develop alternative energy sources. These growing energy needs can be met by the efficient energy conversion of biomass, which can be done by various means. The use of effective catalysts to transform different types of biomasses will be a paradigm change on the road to the worldwide goal of economic sustainability and environmental protection. The development of alternative energy from biomass is not easy, due to the uneven and complex components present in lignocellulose; accordingly, the majority of biomass is currently processed as waste. The problems may be overcome by the design of multifunctional catalysts, offering adequate control over product selectivity and substrate activation. Hence, this review describes recent developments involving various catalysts such as metallic oxides, supported metal or composite metal oxides, char-based and carbon-based substances, metal carbides and zeolites, with reference to the catalytic conversion of biomass including cellulose, hemicellulose, biomass tar, lignin and their derivative compounds into useful products, including bio-oil, gases, hydrocarbons, and fuels. The main aim is to provide an overview of the latest work on the use of catalysts for successful conversion of biomass. The review ends with conclusions and suggestions for future research, which will assist researchers in utilizing these catalysts for the safe conversion of biomass into valuable chemicals and other products.
Collapse
Affiliation(s)
- Muhammad Naeem
- Centre for Inorganic Chemistry, School of Chemistry, University of the Punjab, Quaid-e-Azam Campus, Lahore, 54590, Pakistan
| | - Muhammad Imran
- Centre for Inorganic Chemistry, School of Chemistry, University of the Punjab, Quaid-e-Azam Campus, Lahore, 54590, Pakistan.
| | - Shoomaila Latif
- School of Physical Sciences, University of the Punjab, Lahore, 54590, Pakistan
| | - Adnan Ashraf
- Department of Chemistry, The University of Lahore, Pakistan
| | - Nazim Hussain
- Center for Applied Molecular Biology (CAMB), University of the Punjab, Lahore, 54000, Pakistan
| | - Grzegorz Boczkaj
- Department of Sanitary Engineering, Faculty of Civil and Environmental Engineering, Gdańsk University of Technology, G. Narutowicza St. 11/12, Gdańsk, 80-233, Poland; EkoTech Center, Gdańsk University of Technology, G. Narutowicza St. 11/12, Gdańsk, 80-233, Poland
| | - Wojciech Smułek
- Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Berdychowo 4, PL-60965, Poznan, Poland
| | - Teofil Jesionowski
- Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Berdychowo 4, PL-60965, Poznan, Poland
| | - Muhammad Bilal
- Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Berdychowo 4, PL-60965, Poznan, Poland.
| |
Collapse
|
3
|
Kobelev KV, Gribkova IN, Kharlamova LN, Danilyan AV, Zakharov MA, Lazareva IV, Kozlov VI, Borisenko OA. Study of Brewer's Spent Grain Environmentally Friendly Processing Ways. Molecules 2023; 28:molecules28114553. [PMID: 37299027 DOI: 10.3390/molecules28114553] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2023] [Revised: 05/26/2023] [Accepted: 06/03/2023] [Indexed: 06/12/2023] Open
Abstract
BACKGROUND This article is devoted to the study of the effect of electrochemically activated water (catholyte with pH 9.3) on organic compounds of the plant matrix of brewer's spent grain in order to extract various compounds from it. METHODS Brewer's spent grain was obtained from barley malt at a pilot plant by mashing the malt followed by filtration and washing of the grain in water and storing it at (0 ± 2) °C in craft bags. For the organic compound quantitative determination, instrumental methods of analysis (HPLC) were used, and the results were subjected to mathematical analysis. RESULTS The study results showed that at atmospheric pressure, the alkaline properties of the catholyte showed better results compared to aqueous extraction with respect to β-glucan, sugars, nitrogenous and phenolic compounds, and 120 min was the best period for extraction at 50 °C. The excess pressure conditions used (0.5 ÷ 1 atm) revealed an increase in the accumulation of non-starch polysaccharide and nitrogenous compounds, while the level of sugars, furan and phenolic compounds decreased with increasing treatment duration. The waste grain extract ultrasonic treatment used revealed the effectiveness of catholyte in relation to the extraction of β-glucan and nitrogenous fractions; however, sugars and phenolic compounds did not significantly accumulate. The correlation method made it possible to reveal the regularities in the formation of furan compounds under the conditions of extraction with the catholyte: Syringic acid had the greatest effect on the formation of 5-OH-methylfurfural at atmospheric pressure and 50 °C and vanillic acid under conditions of excess pressure. Regarding furfural and 5-methylfurfural, amino acids had a direct effect at excess pressure. It was shown that the content of all furan compounds depends on amino acids with thiol groups and gallic acid; the formation of 5-hydroxymethylfurfural and 5-methylfurfural is influenced by gallic and vanillic acids; the release of furfural and 5-methylfurfural is determined by amino acids and gallic acid; excess pressure conditions promote the formation of furan compounds under the action of gallic and lilac acids. CONCLUSIONS This study showed that a catholyte allows for efficient extraction of carbohydrate, nitrogenous and monophenolic compounds under pressure conditions, while flavonoids require a reduction in extraction time under pressure conditions.
Collapse
Affiliation(s)
- Konstantin V Kobelev
- All-Russian Scientific Research Institute of Brewing, Beverage and Wine Industry-Branch of V.M. Gorbatov Federal Research Center for Food Systems, 119021 Moscow, Russia
| | - Irina N Gribkova
- All-Russian Scientific Research Institute of Brewing, Beverage and Wine Industry-Branch of V.M. Gorbatov Federal Research Center for Food Systems, 119021 Moscow, Russia
| | - Larisa N Kharlamova
- All-Russian Scientific Research Institute of Brewing, Beverage and Wine Industry-Branch of V.M. Gorbatov Federal Research Center for Food Systems, 119021 Moscow, Russia
| | - Armen V Danilyan
- All-Russian Scientific Research Institute of Brewing, Beverage and Wine Industry-Branch of V.M. Gorbatov Federal Research Center for Food Systems, 119021 Moscow, Russia
| | - Maxim A Zakharov
- All-Russian Scientific Research Institute of Brewing, Beverage and Wine Industry-Branch of V.M. Gorbatov Federal Research Center for Food Systems, 119021 Moscow, Russia
| | - Irina V Lazareva
- All-Russian Scientific Research Institute of Brewing, Beverage and Wine Industry-Branch of V.M. Gorbatov Federal Research Center for Food Systems, 119021 Moscow, Russia
| | - Valery I Kozlov
- All-Russian Scientific Research Institute of Brewing, Beverage and Wine Industry-Branch of V.M. Gorbatov Federal Research Center for Food Systems, 119021 Moscow, Russia
| | - Olga A Borisenko
- All-Russian Scientific Research Institute of Brewing, Beverage and Wine Industry-Branch of V.M. Gorbatov Federal Research Center for Food Systems, 119021 Moscow, Russia
| |
Collapse
|
4
|
Ke S, Zhang D, Li Y, Gong Z, Tang P, Tang W. One-pot synthesis and fluorescent property of novel syringaldehyde α-aminophosphonate derivatives. PHOSPHORUS SULFUR 2023. [DOI: 10.1080/10426507.2023.2187798] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/18/2023]
Affiliation(s)
- Si Ke
- Department of Pharmacy Engineering, College of Chemistry and Chemical Engineering, Qiqihar University, Qiqihar, Heilongjiang Province, China
| | - Duanyi Zhang
- Department of Pharmacy Engineering, College of Chemistry and Chemical Engineering, Qiqihar University, Qiqihar, Heilongjiang Province, China
| | - Yu Li
- Department of Pharmacy Engineering, College of Chemistry and Chemical Engineering, Qiqihar University, Qiqihar, Heilongjiang Province, China
| | - Ziwei Gong
- Department of Pharmacy Engineering, College of Chemistry and Chemical Engineering, Qiqihar University, Qiqihar, Heilongjiang Province, China
| | - Pengcheng Tang
- Department of Pharmacy Engineering, College of Chemistry and Chemical Engineering, Qiqihar University, Qiqihar, Heilongjiang Province, China
| | - Wanxia Tang
- Department of Pharmacy Engineering, College of Chemistry and Chemical Engineering, Qiqihar University, Qiqihar, Heilongjiang Province, China
| |
Collapse
|
5
|
Wang J, Han X, Wu W, Wang X, Ding L, Wang Y, Li S, Hu J, Yang W, Zhang C, Jiang S. Oxidation of cellulose molecules toward delignified oxidated hot-pressed wood with improved mechanical properties. Int J Biol Macromol 2023; 231:123343. [PMID: 36682656 DOI: 10.1016/j.ijbiomac.2023.123343] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/09/2022] [Revised: 01/10/2023] [Accepted: 01/15/2023] [Indexed: 01/21/2023]
Abstract
Wooden building materials have advantages in terms of biodegradability, non-toxicity, pollution-free and recycling. Currently, applications of natural wood are extremely limited because of low density, low strength and toughness. Therefore, we reported an effective modification strategy with nano-scale cellulose nanofibrils design to prepare a synergistically enhanced cellulosic material. Via three steps: i) the secondary alcohol hydroxyl groups in C2, C3 position were cut; ii) oxidize the hydroxyl group at C2, C3 position to achieve dialdehyde cellulose; and iii) oxidized again to obtain dicarboxylic cellulose. Subsequently, thanks to the regulation of the average moisture content, the moisture content in the wood surface and subsurface increased in a short time. The wood softening layer contributes to the hotpressing treatment of the wood. The mechanical properties and dimensionality have been greatly improved. The obtained delignified oxidated hot-pressed wood with 0.55 mmol/g carboxyl group content demonstrates excellent strength of 328.8 ± 7.43 MPa and Young's modulus of 8.1 ± 0.14 GPa, which is twice than that of natural wood. Delignified oxidated hot-pressed wood also shows exceptional toughness of 8.3 ± 0.28 MJ/m3. Other than that, the shore hardness indicates 0.55 mmol/g carboxylic group, which could increase the hardness at the wood surface hardness to 72.5 ± 4.29°.
Collapse
Affiliation(s)
- Jingwen Wang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Xiaoshuai Han
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China.
| | - Weijie Wu
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China.
| | - Xiaoyi Wang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Linhu Ding
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Yuli Wang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Shanshan Li
- College of Pharmacy, Southwest Minzu University, Chengdu 610000, China.
| | - Jiapeng Hu
- Key Laboratory of Green Chemical Technology of Fujian Province University, College of Ecological and Resources Engineering, Wuyi University, Wuyishan 354300, China
| | - Weisen Yang
- Key Laboratory of Green Chemical Technology of Fujian Province University, College of Ecological and Resources Engineering, Wuyi University, Wuyishan 354300, China.
| | - Chunmei Zhang
- Institute of Materials Science and Devices, School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China.
| | - Shaohua Jiang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China.
| |
Collapse
|
6
|
Wang D, Cui M, Zhao W, Li Y, Ma S, Jiang Z, Liu X, Liang C, Li R, Ma L, Song Y, Wei XY. Production of Diethyl Maleate via Oxidative Depolymerization of Organosolv Lignin from Wheat Stalk over the Cooperative Acidic Ionic Liquid Pair. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2023; 71:3800-3812. [PMID: 36802600 DOI: 10.1021/acs.jafc.2c07478] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Lignin, the second largest component of biomass, is considered as an important alternative source of fossil reserves for the production of fuels and chemicals. Here, we developed a novel method to oxidatively degrade organosolv lignin into value-added four-carbon esters, particularly diethyl maleate (DEM), with the cooperative catalyst consisting of 1-(3-sulfobutyl) triethylammonium hydrogen sulfate ([BSTEA]HSO4) and 1-butyl-3-methylimidazolium ferric chloride ([BMIM]Fe2Cl7). Under optimized conditions (1.00 MPa initial O2 pressure, 160 °C, 5 h), the lignin aromatic ring was effectively cleaved by oxidation to form DEM with a yield of 15.85% and a selectivity of 44.25% in the presence of the synergistic catalyst of [BMIM]Fe2Cl7-[BSMIM]HSO4 (1/3, mol/mol). The structure and composition analysis of lignin residues and liquid products confirmed that the aromatic units in lignin were effectively and selectively oxidized. Furthermore, the catalytic oxidation of lignin model compounds was explored for obtaining a possible reaction pathway of oxidative cleavage of lignin aromatic units to DEM. This study provides a promising alternative method for the production of traditional petroleum-based chemicals.
Collapse
Affiliation(s)
- Dingkai Wang
- Key Laboratory of Coal Processing and Efficient Utilization, China University of Mining & Technology, Xuzhou 221116, Jiangsu, China
| | - Mingyu Cui
- Key Laboratory of Coal Processing and Efficient Utilization, China University of Mining & Technology, Xuzhou 221116, Jiangsu, China
| | - Wei Zhao
- Key Laboratory of Coal Processing and Efficient Utilization, China University of Mining & Technology, Xuzhou 221116, Jiangsu, China
| | - Yanjun Li
- Key Laboratory of Coal Processing and Efficient Utilization, China University of Mining & Technology, Xuzhou 221116, Jiangsu, China
- Shannxi Key Laboratory of Low Metamorphic Coal Clean Utilization, School of Chemistry and Chemical Engineering, Yulin University, Yulin 719000, Shannxi, China
| | - Shangshang Ma
- Key Laboratory of Coal Processing and Efficient Utilization, China University of Mining & Technology, Xuzhou 221116, Jiangsu, China
| | - Zhijie Jiang
- Key Laboratory of Coal Processing and Efficient Utilization, China University of Mining & Technology, Xuzhou 221116, Jiangsu, China
| | - Xutang Liu
- Key Laboratory of Coal Processing and Efficient Utilization, China University of Mining & Technology, Xuzhou 221116, Jiangsu, China
| | - Chong Liang
- Key Laboratory of Coal Processing and Efficient Utilization, China University of Mining & Technology, Xuzhou 221116, Jiangsu, China
| | - Rujuan Li
- Cosychem Technology (Tianjin) Co., Ltd., Tianjin 300450, China
| | - Long Ma
- Cosychem Technology (Tianjin) Co., Ltd., Tianjin 300450, China
| | - Yanmin Song
- Cosychem Technology (Tianjin) Co., Ltd., Tianjin 300450, China
| | - Xian-Yong Wei
- Key Laboratory of Coal Processing and Efficient Utilization, China University of Mining & Technology, Xuzhou 221116, Jiangsu, China
| |
Collapse
|
7
|
Catalytic (Copper) Hydrothermal Liquefaction for Lignin to Produce High Quality Bio-oil and Nano Cu Carbon Hybrids Material. Chem Eng Sci 2023. [DOI: 10.1016/j.ces.2023.118548] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/11/2023]
|
8
|
Nair LG, Agrawal K, Verma P. An insight into the principles of lignocellulosic biomass-based zero-waste biorefineries: a green leap towards imperishable energy-based future. Biotechnol Genet Eng Rev 2022; 38:288-338. [PMID: 35670485 DOI: 10.1080/02648725.2022.2082223] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/02/2022]
Abstract
Lignocellulosic biomass (LCB) is an energy source that has a huge impact in today's world. The depletion of fossil fuels, increased pollution, climatic changes, etc. have led the public and private sectors to move towards sustainability i.e. using LCB for the production of biofuels and value-added compounds. A major bottleneck of the process is the recalcitrant nature of LCB. This can be overcome by using various pretreatment strategies like physical, chemical, biological, physicochemical, etc. Further, the pretreated biomass is made to undergo various steps like hydrolysis, saccharification, etc. for the conversion of value-added products and the remaining waste residues can be further utilized for the synthesis of secondary products thus favouring the zero-waste biorefinery concept. Currently, microorganisms are being explored for their use in biorefinery but the unavailability of commercial strains is a major limitation. Thus, the use of metagenomics can be used to overcome the limitation which is both cost-effective and environmentally friendly. The review deliberates the composition of LCBs, and their recalcitrance nature, followed by the structural changes caused by various pretreatment methods. The further steps in biorefineries, strategies for the development of zero-waste refineries, bottlenecks, and suggestions are also discussed. Special emphasis is given to the use of metagenomics for the discovery of microorganisms efficient for zero-waste biorefineries.
Collapse
Affiliation(s)
- Lakshana G Nair
- Bioprocess and Bioenergy Laboratory, Department of Microbiology, Central University of Rajasthan, Kishangarh, Ajmer, India
| | - Komal Agrawal
- Bioprocess and Bioenergy Laboratory, Department of Microbiology, Central University of Rajasthan, Kishangarh, Ajmer, India
| | - Pradeep Verma
- Bioprocess and Bioenergy Laboratory, Department of Microbiology, Central University of Rajasthan, Kishangarh, Ajmer, India
| |
Collapse
|
9
|
Li P, Ren J, Jiang Z, Huang L, Wu C, Wu W. Review on the preparation of fuels and chemicals based on lignin. RSC Adv 2022; 12:10289-10305. [PMID: 35424980 PMCID: PMC8972114 DOI: 10.1039/d2ra01341j] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2022] [Accepted: 03/29/2022] [Indexed: 12/14/2022] Open
Abstract
Lignin is by far the most abundant natural renewable aromatic polymer in nature, and its reserves are second only to cellulose. In addition to the rich carbon content, the structure of lignin contains functional groups such as benzene rings, methoxyl groups, and phenolic hydroxyl groups. Lignin degradation has become one of the high value, high quality and high efficiency methods to convert lignin, which is of great significance to alleviating the current energy shortage and environmental crisis. This article introduces the hydrolysis methods of lignin in acidic, alkaline, ionic liquids and supercritical fluids, reviews the heating rate, the source of lignin species and the effects of heating rate on the pyrolysis of lignin, and briefly describes the metal catalysis, oxidation methods such as electrochemical degradation and photocatalytic oxidation, and degradation reduction methods using hydrogen and hydrogen supply reagents. The lignin degradation methods for the preparation of fuels and chemicals are systematically summarized. The advantages and disadvantages of different methods, the selectivity under different conditions and the degradation efficiency of different catalytic combination systems are compared. In this paper, a new approach to improve the degradation efficiency is envisioned in order to contribute to the efficient utilization and high value conversion of lignin.
Collapse
Affiliation(s)
- Penghui Li
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University Nanjing 210037 China.,College of Light Industry and Food Engineering, Nanjing Forestry University Nanjing 210037 China
| | - Jianpeng Ren
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University Nanjing 210037 China.,College of Light Industry and Food Engineering, Nanjing Forestry University Nanjing 210037 China
| | - Zhengwei Jiang
- College of Light Industry and Food Engineering, Nanjing Forestry University Nanjing 210037 China
| | - Lijing Huang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University Nanjing 210037 China.,College of Light Industry and Food Engineering, Nanjing Forestry University Nanjing 210037 China
| | - Caiwen Wu
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University Nanjing 210037 China.,College of Light Industry and Food Engineering, Nanjing Forestry University Nanjing 210037 China
| | - Wenjuan Wu
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University Nanjing 210037 China.,College of Light Industry and Food Engineering, Nanjing Forestry University Nanjing 210037 China
| |
Collapse
|
10
|
Wu J, Zhu X, Fu Y, Chang J. Study on Selective Preparation of Phenolic Products from Lignin over Ru–Ni Bimetallic Catalysts Supported on Modified HY Zeolite. Ind Eng Chem Res 2022. [DOI: 10.1021/acs.iecr.1c04594] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Jiawen Wu
- School of Chemistry and Chemical Engineering, South China University of Technology, Tianhe, Guangzhou 510640, China
| | - Xiaofan Zhu
- School of Chemistry and Chemical Engineering, South China University of Technology, Tianhe, Guangzhou 510640, China
| | - Yan Fu
- School of Chemistry and Chemical Engineering, South China University of Technology, Tianhe, Guangzhou 510640, China
| | - Jie Chang
- School of Chemistry and Chemical Engineering, South China University of Technology, Tianhe, Guangzhou 510640, China
| |
Collapse
|
11
|
Panyadee R, Saengsrichan A, Posoknistakul P, Laosiripojana N, Ratchahat S, Matsagar BM, Wu KCW, Sakdaronnarong C. Lignin-Derived Syringol and Acetosyringone from Palm Bunch Using Heterogeneous Oxidative Depolymerization over Mixed Metal Oxide Catalysts under Microwave Heating. Molecules 2021; 26:7444. [PMID: 34946525 PMCID: PMC8707958 DOI: 10.3390/molecules26247444] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/21/2021] [Revised: 11/28/2021] [Accepted: 12/06/2021] [Indexed: 11/20/2022] Open
Abstract
Biomass valorization to building block chemicals in food and pharmaceutical industries has tremendously gained attention. To produce monophenolic compounds from palm empty fruit bunch (EFB), EFB was subjected to alkaline hydrothermal extraction using NaOH or K2CO3 as a promotor. Subsequently, EFB-derived lignin was subjected to an oxidative depolymerization using Cu(II) and Fe(III) mixed metal oxides catalyst supported on γ-Al2O3 or SiO2 as the catalyst in the presence of hydrogen peroxide. The highest percentage of total phenolic compounds of 63.87 wt% was obtained from microwave-induced oxidative degradation of K2CO3 extracted lignin catalyzed by Cu-Fe/SiO2 catalyst. Main products from the aforementioned condition included 27.29 wt% of 2,4-di-tert-butylphenol, 19.21 wt% of syringol, 9.36 wt% of acetosyringone, 3.69 wt% of acetovanillone, 2.16 wt% of syringaldehyde, and 2.16 wt% of vanillin. Although the total phenolic compound from Cu-Fe/Al2O3 catalyst was lower (49.52 wt%) compared with that from Cu-Fe/SiO2 catalyst (63.87 wt%), Cu-Fe/Al2O3 catalyst provided the greater selectivity of main two value-added products, syringol and acetosyrigone, at 54.64% and 23.65%, respectively (78.29% total selectivity of two products) from the NaOH extracted lignin. The findings suggested a promising method for syringol and acetosyringone production from the oxidative heterogeneous lignin depolymerization under low power intensity microwave heating within a short reaction time of 30 min.
Collapse
Affiliation(s)
- Rangsalid Panyadee
- Department of Chemical Engineering, Faculty of Engineering, Mahidol University, 999 Putthamonthon 4 Road, Salaya, Putthamonthon, Nakorn Pathom 73170, Thailand; (R.P.); (A.S.); (P.P.); (S.R.)
| | - Aphinan Saengsrichan
- Department of Chemical Engineering, Faculty of Engineering, Mahidol University, 999 Putthamonthon 4 Road, Salaya, Putthamonthon, Nakorn Pathom 73170, Thailand; (R.P.); (A.S.); (P.P.); (S.R.)
| | - Pattaraporn Posoknistakul
- Department of Chemical Engineering, Faculty of Engineering, Mahidol University, 999 Putthamonthon 4 Road, Salaya, Putthamonthon, Nakorn Pathom 73170, Thailand; (R.P.); (A.S.); (P.P.); (S.R.)
| | - Navadol Laosiripojana
- The Joint Graduate School of Energy and Environment (JGSEE), King Mongkut’s University of Technology Thonburi, 126 Pracha Uthit Road, Bang Mot, Tungkru, Bangkok 10140, Thailand;
| | - Sakhon Ratchahat
- Department of Chemical Engineering, Faculty of Engineering, Mahidol University, 999 Putthamonthon 4 Road, Salaya, Putthamonthon, Nakorn Pathom 73170, Thailand; (R.P.); (A.S.); (P.P.); (S.R.)
| | - Babasaheb M. Matsagar
- Department of Chemical Engineering, National Taiwan University, No.1, Sec. 4 Roosevelt Road, Taipei City 10617, Taiwan; (B.M.M.); (K.C.-W.W.)
| | - Kevin C.-W. Wu
- Department of Chemical Engineering, National Taiwan University, No.1, Sec. 4 Roosevelt Road, Taipei City 10617, Taiwan; (B.M.M.); (K.C.-W.W.)
- Center of Atomic Initiative for New Materials (AI-MAT), National Taiwan University, Taipei City 10617, Taiwan
- International Graduate Program of Molecular Science and Technology, National Taiwan University (NTU), Taipei City 10617, Taiwan
| | - Chularat Sakdaronnarong
- Department of Chemical Engineering, Faculty of Engineering, Mahidol University, 999 Putthamonthon 4 Road, Salaya, Putthamonthon, Nakorn Pathom 73170, Thailand; (R.P.); (A.S.); (P.P.); (S.R.)
| |
Collapse
|
12
|
Kumar A, Biswas B, Kaur R, Krishna BB, Bhaskar T. Hydrothermal oxidative valorisation of lignin into functional chemicals: A review. BIORESOURCE TECHNOLOGY 2021; 342:126016. [PMID: 34582987 DOI: 10.1016/j.biortech.2021.126016] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/02/2021] [Revised: 09/19/2021] [Accepted: 09/20/2021] [Indexed: 06/13/2023]
Abstract
Lignin is a waste by-product of bio-refineries and paper-pulp industries. It has an attractive potential to produce numerous valuable chemicals due to its highly aromatic character. At present, large amount of lignin is burnt as a source of energy due to lack of suitable efficient lignin valorisation processes. The challenge exists in handling its complex heterogeneous structure and bond breaking at selective locations. The production of high value chemicals/petrochemical feedstocks will improve the economic viability of a bio-refinery. Oxidative depolymerization is a promising way to produce functional compounds from lignin. The aim of the current review is to present the novel methodologies currently used in the area of lignin oxidative depolymerization including effect of temperature, residence time, solvent, oxidizing agents, homogeneous and heterogeneous catalysis etc. It aims to present an insight into the structure of lignin and its breakdown mechanism.
Collapse
Affiliation(s)
- Avnish Kumar
- Sustainability Impact Assessment Area (SIA), Material Resource Efficiency Division (MRED), CSIR-Indian Institute of Petroleum (IIP), Dehradun 248005, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India
| | - Bijoy Biswas
- Sustainability Impact Assessment Area (SIA), Material Resource Efficiency Division (MRED), CSIR-Indian Institute of Petroleum (IIP), Dehradun 248005, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India
| | - Ramandeep Kaur
- Sustainability Impact Assessment Area (SIA), Material Resource Efficiency Division (MRED), CSIR-Indian Institute of Petroleum (IIP), Dehradun 248005, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India
| | - Bhavya B Krishna
- Sustainability Impact Assessment Area (SIA), Material Resource Efficiency Division (MRED), CSIR-Indian Institute of Petroleum (IIP), Dehradun 248005, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India
| | - Thallada Bhaskar
- Sustainability Impact Assessment Area (SIA), Material Resource Efficiency Division (MRED), CSIR-Indian Institute of Petroleum (IIP), Dehradun 248005, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India.
| |
Collapse
|
13
|
Cleavage via Selective Catalytic Oxidation of Lignin or Lignin Model Compounds into Functional Chemicals. CHEMENGINEERING 2021. [DOI: 10.3390/chemengineering5040074] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Lignin, a complex aromatic polymer with different types of methoxylated phenylpropanoid connections, enables the sustainable supply of value-added chemicals and biofuels through its use as a feedstock. Despite the development of numerous methodologies that upgrade lignin to high-value chemicals such as drugs and organic synthesis intermediates, the variety of valuable products obtained from lignin is still very limited, mainly delivering hydrocarbons and oxygenates. Using selective oxidation and activation cleavage of lignin, we can obtain value-added aromatics, including phenols, aldehydes, ketones, and carboxylic acid. However, biorefineries will demand a broad spectrum of fine chemicals in the future, not just simple chemicals like aldehydes and ketones containing simple C = O groups. In particular, most n-containing aromatics, which have found important applications in materials science, agro-chemistry, and medicinal chemistry, such as amide, aniline, and nitrogen heterocyclic compounds, are obtained through n-containing reagents mediating the oxidation cleavage in lignin. This tutorial review provides updates on recent advances in different classes of chemicals from the catalytic oxidation system in lignin depolymerization, which also introduces those functionalized products through a conventional synthesis method. A comparison with traditional synthetic strategies reveals the feasibility of the lignin model and real lignin utilization. Promising applications of functionalized compounds in synthetic transformation, drugs, dyes, and textiles are also discussed.
Collapse
|
14
|
Lee N, Kim YT, Lee J. Recent Advances in Renewable Polymer Production from Lignin-Derived Aldehydes. Polymers (Basel) 2021; 13:364. [PMID: 33498847 PMCID: PMC7865860 DOI: 10.3390/polym13030364] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/10/2021] [Revised: 01/21/2021] [Accepted: 01/21/2021] [Indexed: 11/25/2022] Open
Abstract
Lignin directly derived from lignocellulosic biomass has been named a promising source of platform chemicals for the production of bio-based polymers. This review discusses potentially relevant routes to produce renewable aromatic aldehydes (e.g., syringaldehyde and vanillin) from lignin feedstocks (pre-isolated lignin or lignocellulose) that are used to synthesize a range of bio-based polymers. To do this, the processes to make aromatic aldehydes from lignin with their highest available yields are first presented. After that, the routes from such aldehydes to different polymers are explored. Challenges and perspectives of the production the lignin-derived renewable chemicals and polymers are also highlighted.
Collapse
Affiliation(s)
- Nahyeon Lee
- Department of Energy Systems Research, Ajou University, 206 Worldcup-ro, Suwon 16499, Korea;
| | - Yong Tae Kim
- C1 Gas & Carbon Convergent Research Center, Korea Research Institute of Chemical Technology, 141 Gajeong-ro, Daejeon 34114, Korea;
| | - Jechan Lee
- Department of Energy Systems Research, Ajou University, 206 Worldcup-ro, Suwon 16499, Korea;
- Department of Environmental and Safety Engineering, Ajou University, 206 Worldcup-ro, Suwon 16499, Korea
| |
Collapse
|