Acid Oxidation of Muskmelon Fruit for the Fabrication of Carbon Dots with Specific Emission Colors for Recognition of Hg2+ Ions and Cell Imaging

Turn-Off Fluorescence Sensor for the Detection of Ferric Ion in Water Using Green Synthesized Wrightia coccinea Carbon Quantum Dot

The current study report that the production of carbon quantum dots from Wrightia coccinea (WC) leaves using an eco-friendly, one-pot process. The structural, morphological, and optical characteristics of the CDs made from W. coccinea leaves by hydrothermal treatment at 200 °C for six hours were assessed using a variety of spectroscopic and electron microscopy techniques. The average size of CD was found to be approximately 5 nm using transmission electron microscopy (TEM) and the quantum yield of the produced CD was 15.6%. The synthesized CDs demonstrated extraordinary sensing capacity with a detection limit of 0.511 µM for ferric ion detection. The impact of varying pH levels on the fluorescence behavior of CD was thoroughly investigated. The maximum fluorescence intensity was examined at pH 3. Therefore, to detect Fe3+ ions as best as possible, the pH of the entire solution was adjusted to a value of 3. Furthermore, the pH-dependent fluorescence feature of CDs can be exploited by pH-sensitive fluorescence sensors. In the future, this might provide an added advantage for pH-based fluorescence sensor applications.

Neem biomass derived carbon quantum dots synthesized via one step ultrasonification method for ecofriendly methylene blue dye removal

This article presents a one-step ultrasonication technique for generating biomass carbon dots (BCDs) from neem bark (Azadirachta indica) powder. The BCDs were characterized using modern techniques such as UV-Vis, FTIR, Raman, XRD, HRTEM, FESEM, EDAX, and Zeta potential analyses. Unlike traditional nanocomposite bed systems, this study utilized BCDs as a liquid-phase adsorbent for the regenerative adsorption of the environmentally harmful dye, methylene blue (MB), through an in-situ precipitation reaction. This involved the formation of BCDs-MB adduct via an electrostatic mechanism. The adsorption capacity and percentage of removal were remarkable at 605 mg g-1 and 64.7% respectively, exceeding various solid-based adsorption methods in the literature. The Langmuir isotherm and pseudo-second-order kinetics model provided an excellent fit for this system. The calculated thermodynamic parameter, Gibbs free energy change (ΔG) was negative, indicating a spontaneous, exothermic, and physisorption-based mechanism. The regenerative capacity of our system was further demonstrated by successfully extracting and recovering the MB dye (64%) using ethyl alcohol as the solvent. This method provides an efficient means of recovering valuable cationic organic dye compounds from contaminated environments.

Carbon Dots and Their Polymeric Nanocomposites: Insight into Their Synthesis, Photoluminescence Mechanisms, and Recent Trends in Sensing Applications

Carbon dots (CDs), a novel class of carbon-based nanoparticles, have received a lot of interest recently due to their exceptional mechanical, chemical, and fluorescent properties, as well as their excellent photostability and biocompatibility. CDs' emission properties have already found a variety of potential applications, in which bioimaging and sensing are major highlights. It is widely acknowledged that CDs' fluorescence and surface conditions are closely linked. However, due to the structural complexity of CDs, the specific underlying process of their fluorescence is uncertain and yet to be explained. Because of their low toxicity, robust and wide optical absorption, high chemical stability, rapid transfer characteristics, and ease of modification, CDs have been recognized as promising carbon nanomaterials for a variety of sensing applications. Thus, following such outstanding properties of CDs, they have been mixed and imprinted onto different polymeric components to achieve a highly efficient nanocomposite with improved functional groups and properties. Here, in this review, various approaches and techniques for the preparation of polymer/CDs nanocomposites have been elaborated along with the individual characteristics of CDs. CDs/polymer nanocomposites recently have been highly demanded for sensor applications. The insights from this review are detailed sensor applications of polymer/CDs nanocomposites especially for detection of different chemical and biological analytes such as metal ions, small organic molecules, and several contaminants.

Green synthesis of carbon quantum dots from teak leaves biomass for in situ precipitation and regenerative-removal of methylene blue-dye

The objective of this study was to completely eliminate environmentally harmful cationic organic dye from aqueous solutions using the one-step ultrasonication method, renowned for its energy efficiency, user-friendliness, and minimal requirement for chemical resources, making it particularly suitable for large-scale applications. To achieve effective environmental remediation, we employed carbon dots derived from teak leaf biomass (TBCDs) layered with graphene oxide. We conducted a thorough characterization of the TBCDs using UV-vis spectroscopy (with absorption peaks at λmax = 208 and 276 nm), FTIR spectroscopy (confirming the presence of various functional groups including -OH, -CH, C = O, COO-, C-O-C, and = C-H), Raman spectroscopy (with bands at 1369 cm-1 (D-Band) and 1550 cm-1 (G-Band), and an intensity ratio (ID/IG) = 0.88, indicating structural defects correlated with the sp3 hybridization sites on the TBCDs), XRD analysis (indicating an amorphous nature of particles), HRTEM imaging (showing homogeneous dispersal of TBCDs with typical sizes ranging from 2 to 10 nm), FESEM analysis (showing a flat surface and minuscule particles), and Zeta potential analysis (revealing a surface charge peak at -51.0 mV). Our adsorption experiments yielded significant results, with a substantial 50.1 % removal rate and an impressive adsorption capacity of 735.2 mg g-1. Theoretical adsorption parameters were rigorously analyzed to understand the adsorption behavior, surface interactions, and mechanisms. Among these models, the Langmuir isotherm in conjunction with pseudo-second-order kinetics provided an exceptional fit (with R2 values closer to 1) for our system. The Gibbs free energy (ΔG) was found to be negative at all temperatures, indicating the spontaneity of the reaction. Regarding mechanism, electrostatic attraction ((+ve) MB dye + (- ve) TBCDs), π-π stacking adsorption facilitated by the graphitic structure, formation of multiple hydrogen bonds due to polar functional groups, and a pore-filling mechanism wherein the cationic MB dye fills the pores of TBCDs with graphene oxide layers, forming an adduct were identified. Furthermore, we demonstrated the regenerative capacity of our system by effectively extracting and recovering the MB dye (with a regeneration rate of 77.1%), utilizing ethyl alcohol as the solvent. These findings not only provide valuable insights into the adsorption capabilities of TBCDs but also highlight the potential of our approach in the recovery of expensive cationic organic dye compounds from polluted environments.

Solvent-Dependent Photoluminescence Emission and Colloidal Stability of Carbon Quantum dots from Watermelon Peels

Waste peels are considered an environmental burden and typically disposed in landfills. The aim of this study was to investigate the effects of various solvents on the luminescence properties of carbon quantum dots (CQDs). Watermelon peels were recycled and reuse as precursors for the synthesis of biomass CQDs via a green carbonization method. The colloidal stability, surface charge, and particle size were characterized using zeta potential and dynamic light scattering (DLS). DLS revealed that the size of the CQDs was approximately 5.80 ± 0.4 nm to 9.74 ± 0.8 nm. The high-resolution transmission electron microscopy (HRTEM) results demonstrated a correlation with the DLS results. The optical properties were characterized by photoluminescence (PL) and UV-Visible (UV-Vis) spectroscopy. PL measurements at different excitation wavelengths revealed that the CQDs emissions were influenced by the polarity of the solvents. Meanwhile, the Fourier transform infra-red (FTIR) results showed the presence of oxygen-containing groups on the surface of the CQDs. These results deepen our understanding of the solvent-dependent behavior and colloidal stability of the CQDs.

Synthesis and post-synthesis strategies for polychromatic carbon dots toward unique and tunable multicolor photoluminescence and associated emission mechanism

Carbon dots (CDs) with unique and tunable multicolor photoluminescence (PL) emission has attracted tremendous attention in the past few years due to their potential multifaceted application, specially in the biomedical and optoelectronic fields. There has been extensive deliberation and efforts to engineer the synthesis or post synthesis approach to obtain multicolor-emissive CDs and tune their optical properties toward longer wavelength. This review mainly focuses on the advancement of strategies for synthesis and post-synthesis techniques of CDs toward tunable multicolor emission. Based on the above discussion to achieve desired goals, several synthesis strategies (selection of proper benzenoid precursor, acid/base treatment of biomass, optimization of reaction conditions, optimization of the reagents, solvent engineering, acid strength regulation, reaction temperature regulation, chemical doping) and various post synthesis strategies (column chromatographic separation or purification, solvatochromism, pH variation, surface functionalization, concentration variation) have been reviewed. Although numerous research articles have been published on the synthesis of multicolor CDs for multifaceted application, there is still a lack of a concise review article focusing on systematic synthesis/post synthesis strategies with PL mechanism elucidation. Thus, we focused on providing a comprehensive overview of the state-of-the-art advances on the strategies for the preparation of polychromatic CDs with tunable emission and elucidating their emission mechanism.

Synthetic strategies, properties and sensing application of multicolor carbon dots: recent advances and future challenges

Recently, carbon dots (CDs) as newly developed carbon-based nanomaterials due to advantages such as excellent photostability and easy surface functionalization have generated wide application prospects in fields such as biological imaging and chemical sensing. The multicolor emission carbon dots (M-CDs) were acquired through the selection of different carbon source precursors, change of synthesis conditions and synthesis environment. Therefore, the aim of this review is to summarize the latest research progress in polychromatic CDs from the perspectives of synthesis strategies, luminescent mechanisms, luminescent properties and applications. This review focuses on how to prepare MCDs by changing raw materials and synthesis conditions such as reaction temperature, synthesis time, synthesis pH, and synthesis solvent. This review also presents the optical properties of MCDs, concentration effects, solvent effects, pH effects, elemental doping, and surface passivation on them, as well as their creative applications in the field of sensing applications. It is anticipated that this review will serve as a guide for the development of multifunctional M-CDs and inspire future research on controllable design and preparation of M-CDs.

Synthesis, properties and potential applications of photoluminescent carbon nanoparticles: A review

Photoluminescent-carbon nanoparticles (PL-CNPs) are a new class of materials that received immense interest among researchers due to their distinct characteristics, including photoluminescence, high surface-to-volume ratio, low cost, ease of synthesis, high quantum yield, and biocompatibility. By exploiting these outstanding properties, many studies have been reported on its utility as sensors, photocatalysts, probes for bio-imaging, and optoelectronics applications. From clinical applications to point-of-care test devices, drug loading to tracking of drug delivery, and other research innovations demonstrated PL-CNPs as an emerging material that could substitute conventional approaches. However, some of the PL-CNPs have poor PL properties and selectivity due to the presence of impurities (e.g., molecular fluorophores) and unfavourable surface charges by the passivation molecules, which impede their applications in many fields. To address these issues, many researchers have been paying great attention to developing new PL-CNPs with different composite combinations to achieve high PL properties and selectivity. Herein, we thoroughly discussed the recent development of various synthetic strategies employed to prepare PL-CNPs, doping effects, photostability, biocompatibility, and applications in sensing, bioimaging, and drug delivery fields. Moreover, the review discussed the limitations, future direction, and perspectives of PL-CNPs in possible potential applications.

Review on Carbon Dot-Based Fluorescent Detection of Biothiols

Biothiols, such as cysteine (Cys), homocysteine (Hcy), and glutathione (GSH), play a vital role in gene expression, maintaining redox homeostasis, reducing damages caused by free radicals/toxins, etc. Likewise, abnormal levels of biothiols can lead to severe diseases, such as Alzheimer's disease (AD), neurotoxicity, hair depigmentation, liver/skin damage, etc. To quantify the biothiols in a biological system, numerous low-toxic probes, such as fluorescent quantum dots, emissive organic probes, composited nanomaterials, etc., have been reported with real-time applications. Among these fluorescent probes, carbon-dots (CDs) have become attractive for biothiols quantification because of advantages of easy synthesis, nano-size, crystalline properties, low-toxicity, and real-time applicability. A CDs-based biothiols assay can be achieved by fluorescent "Turn-On" and "Turn-Off" responses via direct binding, metal complex-mediated detection, composite enhanced interaction, reaction-based reports, and so forth. To date, the availability of a review focused on fluorescent CDs-based biothiols detection with information on recent trends, mechanistic aspects, linear ranges, LODs, and real applications is lacking, which allows us to deliver this comprehensive review. This review delivers valuable information on reported carbon-dots-based biothiols assays, the underlying mechanism, their applications, probe/CDs selection, sensory requirement, merits, limitations, and future scopes.

Green Carbon Dots: Synthesis, Characterization, Properties and Biomedical Applications

Carbon dots (CDs) are a new category of crystalline, quasi-spherical fluorescence, "zero-dimensional" carbon nanomaterials with a spatial size between 1 nm to 10 nm and have gained widespread attention in recent years. Green CDs are carbon dots synthesised from renewable biomass such as agro-waste, plants or medicinal plants and other organic biomaterials. Plant-mediated synthesis of CDs is a green chemistry approach that connects nanotechnology with the green synthesis of CDs. Notably, CDs made with green technology are economical and far superior to those manufactured with physicochemical methods due to their exclusive benefits, such as being affordable, having high stability, having a simple protocol, and being safer and eco-benign. Green CDs can be synthesized by using ultrasonic strategy, chemical oxidation, carbonization, solvothermal and hydrothermal processes, and microwave irradiation using various plant-based organic resources. CDs made by green technology have diverse applications in biomedical fields such as bioimaging, biosensing and nanomedicine, which are ascribed to their unique properties, including excellent luminescence effect, strong stability and good biocompatibility. This review mainly focuses on green CDs synthesis, characterization techniques, beneficial properties of plant resource-based green CDs and their biomedical applications. This review article also looks at the research gaps and future research directions for the continuous deepening of the exploration of green CDs.

The Emerging Development of Multicolor Carbon Dots

As a relatively new type of fluorescent carbon-based nanomaterials, multicolor carbon dots (MCDs) have attracted much attention because of their excellent biocompatibility, tunable photoluminescence (PL), high quantum yield, and unique electronic and physicochemical properties. The multicolor emission characteristics of carbon dots (CDs) obviously depend on the carbon source precursor, reaction conditions, and reaction environment, which directly or indirectly determines the multicolor emission characteristics of CDs. Therefore, this review is the first systematic classification and summary of multiple regulation methods of synthetic MCDs and reviews the recent research progress in the synthesis of MCDs from a variety of precursor materials such as aromatic molecules, small organic molecules, and natural biomass, focusing on how different regulation methods produce corresponding MCDs. This review also introduces the innovative applications of MCDs in the fields of biological imaging, light-emitting diodes (LEDs), sensing, and anti-counterfeiting due to their excellent PL properties. It is hoped that by selecting appropriate adjustment methods, this review can inspire and guide the future research on the design of tailored MCDs, and provide corresponding help for the development of multifunctional MCDs.

One step synthesis of ultra-high quantum yield fluorescent carbon dots for "on-off-on" detection of Hg2+ and biothiols

In this paper, the carbon dots (CDs) with strong blue fluorescence were synthesized through hydrothermal method, which using folic acid, ammonium citrate and ethylenediamine as precursors. The prepared CDs with a high absolute quantum yield of 81.94% and showed excellent stability in high concentration salt solution and different pH conditions. With the addition of Hg²⁺, the signal of CDs was selectively quenched. At the same time, the CDs-Hg²⁺ system could be recovered after the introduction of biothiols. Moreover, the fluorescence of CDs showed a good linear relationship with Hg²⁺ (1-15 µM), and the detection limit as low as 0.08 µM. In addition, the prepared CDs with low toxicity could be used to detect Hg²⁺ in living cells and actual water samples.

Carbon dots from eco-friendly precursors for optical sensing application: an up-to-date review

Abstract

Carbon dots (CDs) are zero-dimensional quasi-spherical nanoparticles endowed with excellent advantages including good luminescence features, photostability, low cytotoxicity, remarkable aqueous solubility, favourable biocompatibility, low risk to environment and great flexibility in surface modification. Fluorescent CDs that can selectively respond to specific inorganic/organic target molecules in environmental and biological samples are of prime significance amongst the new generation intelligent sensors due to the critical involvement of different ions/molecular species in not only human health, but also in environment processes. In this context, preparation of CDs from bioprecursors has immense significance due to the involvement of green principles, inexpensive, clean, nontoxic, easily accessible, renewable and large-scale production can be realized. This article aims at exploring different types of green raw materials including plant biomass, animal products, food items and waste materials as carbon sources for the synthesis of both undoped and doped CDs. The emphasis is given on different synthetic approaches adopted for improving the quantum yield without any chemical modification, the characterization techniques, mechanistic origin of photoluminescence and fluorescence response mechanisms involved in the sensing action towards various analytes. The significant benefits and limitations of CDs obtained from eco-friendly precursors through green approaches are summarized. Various challenges and the future prospects of these carbonaceous nanomaterials as sensors are also discussed.

Graphical abstract

Mechanisms for carbon dots-based chemosensing, biosensing, and bioimaging: A review

Due to the favorable biocompatibility, photostability and fluorescence emissions, carbon dots (CDs) are being widely investigated as fluorescent probes. Current CD-based fluorescent probe designs depend largely on conventional fluorescence sensing mechanisms, for e.g. the inner filter effect, photoinduced electron transfer, and Förster resonance energy transfer. Although these mechanisms have been successful, it is still desirable to introduce new sensing mechanisms. In recent years, emerging mechanisms such as aggregation-induced emission, hydrogen-bond induced emission, and intramolecular charge transfer have been developed for CD-based probes. This review summarizes both conventional and emerging mechanisms, and discuss CDs in the context of chemosensing, biosensing, and bioimaging. We provide an outlook for several other mechanisms such as CN isomerization, the short-wavelength inner filter technique, excited-state intramolecular proton transfer, and twisted intramolecular charge transfer, which have been applied to organic fluorescent probes design but not as much in CD-based sensing systems. We envision that this review will provide insights that inspire further development of CD-based fluorescent probes as for biological applications.

Recent Advances in Carbon Dots for In Vitro/Vivo Fluorescent Bioimaging: A Mini-Review

As a new type of “zero-dimensional” fluorescent carbon nanomaterials, carbon dots (CDs) have some unique optical and chemical properties, they are being explored for a variety of applications in bio-related fields, such as bioimaging, biosensors, and therapy. This review mainly summarizes the recent progress of CDs in bioimaging. The overview of this review can be roughly divided into two categories: (1) In vitro bioimaging based on CDs in different cells and important organelles. (2) The distribution, imaging and application of CDs in mice and zebrafish. In addition, this review also points out the potential advantages and future development directions of CDs for bioimaging, which may promote the development of CDs in the field of bioimaging.

Morphology Effect of One-Dimensional MnO2 Nanostructures on Heteroatom-Doped Carbon Dot-Based Biosensors for Selective Detection of Glutathione

Structural versatility of MnO₂ nanostructures plays a significant role in biosensing applications. So, we have prepared simple and selective "turn-off-on" sensing probes for the detection of glutathione (GSH), based on nitrogen, sulfur codoped carbon dots (N, S-Cdots) and different morphologies of one-dimensional (1-D) MnO₂ nanostructures. N, S-Cdots with a high fluorescence quantum yield (73.42%) were prepared by a green approach through high-temperature pyrolysis in just 5 min. The different morphologies of 1-D MnO₂ nanostructures (nanowires with varying aspect ratios and nanorods) were synthesized through a hydrothermal method by varying the reaction period (8, 10, and 12 h). MnO₂ nanowires prepared at 8 h showed a high specific surface area (34 m² g^-1) with a large aspect ratio. They showed significant fluorescence quenching, Stern-Volmer constants, and binding constants in the presence of N, S-Cdots. Further, ultraviolet-visible absorption, zeta potential, and time decay studies showed that the quenching mechanism of the developed sensing system was the inner filter effect, which was further confirmed by using the Parker equation. The N, S-Cdots-MnO₂ nanowire (with a high aspect ratio) sensing system showed the best limit of detection, i.e., 28.5 μM for GSH. This fast, simple, eco-friendly, and cost-effective sensing system can be further used for real-time biosensing and bioimaging application.

Green synthesis of fluorescent carbon nanospheres from chrysanthemum as a multifunctional sensor for permanganate, Hg(II), and captopril

A simple and green method for the synthesis of fluorescent carbon nanospheres (CNs) was proposed using chrysanthemum as a natural precursor and ethylenediamine as the co-reagent. The prepared CNs show strong blue fluorescence in water with quantum yield of 13.7 %, and distinguished fluorescent stability against photobleaching and ion strength. Meanwhile, the fluorescence signal of CNs is reversible and sensitive to temperature in the range of 20-80 °C, which makes CNs useful as a temperature sensor. More importantly, the CNs can serve as excellent fluorescent sensors for detecting MnO₄^- and Hg²⁺ with the detection limit of 0.72 and 0.26 μM, respectively. MnO₄^- quenches the fluorescence of CNs through inner filter effect and static quenching mechanism, while Hg²⁺ forms a stable complex with the amino group on the surface of CNs, resulting in the fluorescence quenching of CNs. However, the stronger affinity between Hg²⁺ and captopril (Cap) results in the fluorescence quenched by Hg²⁺ recovery after the addition of Cap. Thus, the CNs-Hg²⁺ system is employed as a novel sensitive and selective fluorescence "turn-on" sensor for Cap in the range of 0-75 μM. Inspired by the sensing results, the developed sensors were successfully used for the determination of MnO₄^-, Hg²⁺ in river water samples and Cap in the pharmaceutical and urine samples.

Folic acid functionalized molybdenum oxide quantum dots for the detection of Cu2+ ion and alkaline phosphatase via fluorescence turn off-on mechanism

The assay of alkaline phosphatase (ALP) plays a key role in the diagnosis of various diseases. Herein, folic acid functionalized molybdenum oxide quantum dots (FA-MoO_x QDs) are explored as fluorescence "turn- off and on" probes for assaying of Cu²⁺ ion and ALP, respectively. This fluorescence sensing strategy was based on the quenching of emission peak of FA-MoO_x QDs at 445 nm by Cu²⁺ ion, followed by restoring of emission peak selectively with ALP. Based on the quenching and restoring of FA-MoO_x QDs emission intensity, quantitative assay was developed for the detection of Cu²⁺ ion (0.20 - 500 µM) and ALP (0.06 - 150 U/L) with detection limits of 29 nM and 0.026 U/L, respectively. The developed FA-MoO_x QDs-based fluorescence "turn- off and on" strategy exhibited satisfactory results for assaying of ALP in biofluids.

Heavy metal ion detection using green precursor derived carbon dots

The discovery of carbon dots (CDs) for environmental remediation has gained awareness because of the diverse economically viable and environmental friendly green precursors generated from biowastes and biomass compared to the toxic inorganic quantum dots and CDs prepared from chemical precursors. This review presents the recent progress in green CDs, including their synthesis methods and sensing applications for the detection of heavy metal ions such as Iron (III), Mercury (II), Copper (II), Chromium (VI), Lead (II), Arsenic (III), Cobalt (II), Aluminum (III), Silver (I), and Gold (III) which are prominent environmental pollutants. The comparison based on selectivity, sensitivity, quantum yield, detection limit, linear concentration range, and sensing mechanisms are also reported. This review also covers the performance of doped green CDs using heteroatoms, toward the detection of heavy metal ions. Apart from the future perspectives, this review provides a general guide to use such environmental friendly CDs to detect harmful pollutants.

Multiple heteroatom-doped photoluminescent carbon dots for ratiometric detection of Hg2+ ions in cell imaging and environmental applications

Photoluminescence detection and imaging of Hg²⁺ ions in the biochemical living system are of great importance. In this study, a new photoluminescent probe based on nitrogen (N), sulfur (S), and boron (B) multiple heteroatom co-doped carbon dots (NSB-CDs) is synthesized for the ratiometric detection of Hg²⁺ ions. The prepared NSB-CDs possess good aqueous solubility, excellent pH and ionic stability, excitation dependency, and high quantum yield (QY = 17.6%). The ratiometric photoluminescent sensor NSB-CDs exhibit high selectivity, sensitivity, and interference towards Hg²⁺ ions over other metal ions. After adding Hg²⁺ ions, the emission intensity of the NSB-CDs exhibits a large redshift from 452 to 496 nm (up to 44 nm), corresponding to a notable change from blue to green emission in aqueous solutions. The association constant (K_a), the limit of detection (LOD), and the limit of quantification (LOQ) for NSB-CDs/Hg²⁺ complex are calculated to be 3.6 × 10⁴ M^-1, 3.1 × 10^-9 M, and 10.4 × 10^-9 M, respectively, in the range of 0-30 × 10^-6 M. The live cell bioimaging of HCT-116 cells with NSB-CDs validates the application of multicolor imaging for the detection of Hg²⁺ ions in aqueous media and biological systems. Moreover, the potential use of the NSB-CDs/Hg²⁺ complex for real sample analysis is demonstrated.

Recent developments on carbon dots-based green analytical methods: New opportunities in fluorescence assay of pesticides, drugs and biomolecules

Fluorescent carbon dots (CDs) grabs huge attention in analytical and bioanalytical applications due to their high selectivity towards target analyte, specificity, photostability, and quantum yield. Cost-effective and biocompatible properties of...

Carbon Dots: Synthesis, Properties and Applications

Carbon dots (CDs) are known as the rising star of carbon-based nanomaterials and, by virtue of their unique structure and fascinating properties, they have attracted considerable interest in different fields such as biological sensing, drug delivery, photodynamic therapy, photocatalysis, and solar cells in recent years. Particularly, the outstanding electronic and optical properties of the CDs have attracted increasing attention in biomedical and photocatalytic applications owing to their low toxicity, biocompatibility, excellent photostability, tunable fluorescence, outstanding efficient up-converted photoluminescence behavior, and photo-induced electron transfer ability. This article reviews recent progress on the synthesis routes and optical properties of CDs as well as biomedical and photocatalytic applications. Furthermore, we discuss an outlook on future and potential development of the CDs based biosensor, biological dye, biological vehicle, and photocatalysts in this booming research field.

Natural Carbon Nanodots: Toxicity Assessment and Theranostic Biological Application

This review outlines the methods for preparing carbon dots (CDs) from various natural resources to select the process to produce CDs with the best biological application efficacy. The oxidative activity of CDs mainly involves photo-induced cell damage and the destruction of biofilm matrices through the production of reactive oxygen species (ROS), thereby causing cell auto-apoptosis. Recent research has found that CDs derived from organic carbon sources can treat cancer cells as effectively as conventional drugs without causing damage to normal cells. CDs obtained by heating a natural carbon source inherit properties similar to the carbon source from which they are derived. Importantly, these characteristics can be exploited to perform non-invasive targeted therapy on human cancers, avoiding the harm caused to the human body by conventional treatments. CDs are attractive for large-scale clinical applications. Water, herbs, plants, and probiotics are ideal carbon-containing sources that can be used to synthesize therapeutic and diagnostic CDs that have become the focus of attention due to their excellent light stability, fluorescence, good biocompatibility, and low toxicity. They can be applied as biosensors, bioimaging, diagnosis, and treatment applications. These advantages make CDs attractive for large-scale clinical application, providing new technologies and methods for disease occurrence, diagnosis, and treatment research.

Microwave-assisted green synthesis of fluorescent carbon quantum dots from Mexican Mint extract for Fe3+ detection and bio-imaging applications

Biomass-derived carbon quantum dots have drawn special interest owing to their admirable photostability, biocompatibility, fluorescence, high solubility, sensitivity and environmentally friendly properties. In the present work, the Carbon Quantum Dots (CQDs) was synthesized from the Plectranthus amboinicus (Mexican Mint) leaves via the microwave-assisted reflux method. The strong absorption peaks observed from UV-vis spectra at 291 and 330 nm corresponds to the π-π* and n-π* transitions, respectively, reveal the formation of CQDs. The synthesized CQDs showed bright blue fluorescence under UV irradiation with a fluorescence quantum yield of 17% and a maximum emission of 436 nm in the blue region at an excitation wavelength of 340 nm. The HRTEM analysis elucidates that the synthesized CQDs were crystalline and spherical in shape with a particle size of 2.43 ± 0.02 nm. The FT-IR spectroscopy confirms the presence of the different functional groups such as -OH, -CH, CO and C-O. The chemical composition of CQD was revealed through XPS analysis. The synthesized CQDs were used as a fluorescent probe to detect different metal ions, where high selectivity was obtained for Fe³⁺ ions through quenching phenomenon. The emission intensity of CQD showed a good linear relationship with R² = 0.9111 with the concentration of Fe³⁺ ions in the range of 0-15 μM. The fluorescence emission of CQD was turned OFF upon the binding of Fe³⁺ ions and turned - ON with the addition of ascorbic acid. With this fluorescent turn ON-OFF behaviour of CQD, the NOT and IMPLICATION logic gates were constructed and studied for different input conditions. The biocompatibility of CQD was tested via MTT assay using MCF7 breast cancer cell line, which revealed that CQD synthesized from the Mexican Mint leaves possess less cytotoxicity. Further, the prepared CQD was applied effectively as fluorescent probes in a cell imaging application.

Fluorescence quenching mechanism and the application of green carbon nanodots in the detection of heavy metal ions: a review

This review article highlights the quenching mechanism and applications of green CNDs for the detection of metal ions.

One-pot fabrication of dual-emission and single-emission biomass carbon dots for Cu2+ and tetracycline sensing and multicolor cellular imaging

Dual-emission and single-emission carbon dots (DCDs and SCDs) have been simultaneously synthesized by one-pot solvothermal treatment of leek. Different graphitization and surface functionalization were responsible for their distinction in fluorescence characteristics. DCDs with an average size of 5.6 nm exhibited two emissions at 489 and 676 nm under 420-nm excitation. Complexation between DCDs' surface porphyrins and Cu²⁺ led to quenching of the 676-nm emission, which resulted in the ratiometric determination of Cu²⁺ with a limit of detection (LOD) of 0.085 μM. SCDs, containing additional sulfur element (0.50%) with an average size of 7.7 nm, presented a single emission at 440 nm under 365-nm excitation. The static quenching and inner filter effects between SCDs and tetracyclines (TCs) made SCDs a fluorescence nanoprobe for TCs' determination with LODs of 0.26-0.48 μM. Applications of DCDs and SCDs for respective determination of Cu²⁺ and TCs in milk and pig liver samples were successfully demonstrated. Moreover, good photostability, low toxicity, and outstanding biocompatibility made DCDs and SCDs suitable for multicolor cellular imaging. Results indicate that natural products are excellent raw materials to controllably synthesize CDs with prominent physicochemical and fluorescence properties.Graphical abstract.

Plant Part-Derived Carbon Dots for Biosensing

Carbon dots (CDs) are a new cluster of carbon atoms with particle size less than 10 nm. CDs also exhibit interesting fluorescence (FL) properties. CDs are attractive because of their fascinating characteristics including low toxicity, good water solubility, and tremendous biocompatibility. Recently, CDs have been investigated as biosensors for numerous target analytes. Meanwhile, the utilization of cheap and renewable natural resources not only fulfills the pressing requirement for the large-scale synthesis of CDs but also encourages the establishment of sustainable applications. The preparation of CDs using natural resources, i.e., plants, offers several advantages as it is inexpensive, eco-friendly, and highly available in the surroundings. Plant parts are readily available natural resources as the starting materials to produce CDs with different characteristics and attractive applications. Several review articles are now available covering the synthesis, properties, and applications of CDs. However, there is no specific and focused review literature discussing plant part-derived CDs for biosensing applications. To handle this gap, we provide a review of the progress of CDs derived from various plant parts with their synthesis methods, optical properties, and biosensing applications in the last five years. We highlight the synthesis methods and then give an overview of their optical properties and applications as biosensors for various biomolecules and molecules in biological samples. Finally, we discuss some future perspectives for plant part-derived CDs for better material development and applications.

Carbon dots as versatile nanoarchitectures for the treatment of neurological disorders and their theranostic applications: A review

The development of novel methods plays a fundamental role in early diagnosis and controlling of neurological disorders (NDs). Blood-brain barrier (BBB) is the most challenging barrier for the development of neuro drug delivery systems due to its inhibiting ability to enter drugs and agents into central nervous system (CNS). Carbon dots (CDs) have shown to be very promising and outstanding agents for various biomedical applications (bio imaging studies, treatment of NDs and brain tumors). They exhibit remarkable properties such as biocompatibility, small size (less than 10 nm, enabling penetration into BBB), tunable optical properties, photostability and simple synthetic procedures, allowing them to act as ideal candidates in various fields of science. Therefore, the objective of this review is to overview the recent studies on CDs for the development of neuro drug delivery systems to reach CNS via crossing of BBB. Primarily, this review briefly outlines the unique optical properties and toxicity of CDs. The development of novel neuro drug delivery systems for various neurological disorders using CDs as carriers is described. This review also covers the potential applications of CDs in brain tumors imaging and treatment of neurodegenerative diseases. Finally, the sensing applications and future prospects of CDs are summarized.

Hg2+ detection, pH sensing and cell imaging based on bright blue-fluorescent N-doped carbon dots

A multifunctional sensing platform based on bright blue-fluorescent nitrogen-doped carbon dots (N-CDs) has been ingeniously designed for the sensitive determination of Hg²⁺ and pH.