Metal-Organic Framework Coated Devices for Gas Sensing

Electric-field assisted spatioselective deposition of MIL-101(Cr)PEDOT to enhance electrical conductivity and humidity sensing performance

Precise deposition of metal-organic framework (MOF) materials is important for fabricating high-performing MOF-based devices. Electric-field assisted drop-casting of poly(3,4-ethylenedioxythiophene)-functionalized (PEDOT) MIL-101(Cr) nanoparticles onto interdigitated electrodes allowed their precise spatioselective deposition as percolating nanoparticle chains in the interelectrode gaps. The resulting aligned materials were investigated for resistive and capacitive humidity sensing and compared with unaligned samples prepared via regular drop-casting. The spatioselective deposition of MOFs resulted in up to over 500 times improved conductivity and approximately 6 times increased responsivity during resistive humidity sensing. The aligned samples also showed good capacitive humidity sensing performance, with up to 310 times capacitance gain at 10 versus 90 % relative humidity. In contrast, the resistive behavior of the unaligned samples rendered them unsuitable for capacitive sensing. This work demonstrates that applying an alternating potential during drop-casting is a simple yet effective method to control MOF deposition for greater efficiency, conductivity, and enhanced humidity sensing performance.

Solution Processable Metal-Organic Frameworks: Synthesis Strategy and Applications

Metal-organic frameworks (MOFs), constructed by inorganic secondary building units with organic linkers via reticular chemistry, inherently suffer from poor solution processability due to their insoluble nature, resulting from their extensive crystalline networks and structural rigidity. The ubiquitous occurrence of precipitation and agglomeration of MOFs upon formation poses a significant obstacle to the scale-up production of MOF-based monolith, aerogels, membranes, and electronic devices, thus restricting their practical applications in various scenarios. To address the previously mentioned challenge, significant strides have been achieved over the past decade in the development of various strategies aimed at preparing solution-processable MOF systems. In this review, the latest advance in the synthetic strategies for the construction of solution-processable MOFs, including direct dispersion in ionic liquids, surface modification, controllable calcination, and bottom-up synthesis, is comprehensively summarized. The respective advantages and disadvantages of each method are discussed. Additionally, the intriguing applications of solution-processable MOF systems in the fields of liquid adsorbent, molecular capture, sensing, and separation are systematically discussed. Finally, the challenges and opportunities about the continued advancement of solution-processable MOFs and their potential applications are outlooked.

Collaborative integration of SERS and QCM sensing for label-free multi-component gas detection

The effective qualitative and quantitative detection of mixed components of volatile organic compounds (VOCs) with similar molecular structures has always been a challenge and hotpoint in the research. A novel quartz-crystal microbalance (QCM) nanocomposite sensor integrated with a surface-enhanced Raman scattering (SERS) detection platform for multi-component gas analysis was proposed and fabricated in this paper. MIL-100 (Fe)/PAN composite fibers were developed on QCM via electrospinning of polyacrylonitrile (PAN) and hydrothermal synthesis, addressing the integration issues of MIL-100 particles in devices while maintaining high specific surface area. The MIL-100(Fe)/PAN@QCM sensor can simultaneously collect QCM frequency responses and SERS spectra, enabling the quantitative and qualitative detection of toluene and benzaldehyde in mixtures. The linear response relationship between the frequency obtained by the QCM sensor and the concentration of toluene and benzaldehyde gases was in the range of 0-100 ppm, and the limits of detections were 0.57 and 0.86 ppm, respectively. Additionally, an algorithm, that considered the relationship among the QCM frequency response signal, intensity values of the characteristic peaks in the SERS spectra, and the gas concentration, was developed and applied to measure the mixed gases of toluene and benzaldehyde in the concentration range of 0-100 ppm. The relative standard deviations (RSDs) of spiked sample determinations were found to be in the range of 3-8%. This work provided a new method for the efficient and rapid detection of gas molecules with similar structures, which could be extended and applied to detect more multi-component gas mixtures.

Rational MOF Membrane Design for Gas Detection in Complex Environments

Metal-organic frameworks (MOFs) hold significant promise in the realm of gas sensing. However, current understanding of their sensing mechanisms remains limited. Furthermore, the large-scale fabrication of MOFs is hampered by their inadequate mechanical properties. These two challenges contribute to the sluggish development of MOF-based gas-sensing materials. In this review, the selection of metal ions and organic ligands for designing MOFs is first presented, deepening the understanding of the interactions between different metal ions/organic ligands and target gases. Subsequently, the typical interfacial synthesis strategies (gas-solid, gas-liquid, solid-liquid interfaces) are provided, highlighting the potential for constructing MOF membranes on superhydrophobic and/or superhydrophilic substrates. Then, a multi-scale structure design strategies is proposed, including multi-dimensional membrane design and heterogeneous membrane design, to improve sensing performance through enhanced interfacial mass transfer and specific gas sieving. This strategy is anticipated to augment the task-specific capabilities of MOF-based materials in complex environments. Finally, several key future research directions are outlined with the aim not only to further investigate the underlying sensing principles of MOF membranes but also to achieve efficient detection of target gases amidst interfering gases and elevated moisture levels.

Aptamer-Based Electrochemical Biosensing Platform for Analysis of Cardiac Biomarkers

Monitoring biomarkers secreted by cardiomyocytes is critical to evaluate anticancer drug-induced myocardial injury (MI). Cardiac troponin I (cTnI) is considered the gold standard biomarker for MI. Herein, an electrochemical aptasensor is engineered for cTnI detection based on lanthanide europium metal-organic frameworks (Eu-MOFs) and a hybridization chain reaction-directed DNAzyme strategy. Three types of Eu-MOF morphologies were easily synthesized by changing the solvent, and the Eu-MOF modulated by mixing the solvent of dimethylformamide and H2O (D-Eu-MOF) exhibited the best performance compared to other morphologies of the Eu-MOFs. Multifunctional nanoprobes were constructed from D-Eu-MOF@Pt loaded with natural horseradish peroxidase and combined with an aptamer-initiated nuclear acid hybridization chain reaction to form G-quadruplex/hemin DNAzymes for signal amplification. A novel capture probe is constructed on the basis of DNA nanotetrahedrons modified on screen-printed gold electrodes to enhance the capture of the target and multifunctional nanoprobes for signal amplification. It exhibits a detection limit of 0.17 pg mL-1 and a linear range from 0.5 pg mL-1 to 15 ng mL-1. The practicality of the platform is evaluated by measuring cTnI in real samples and secreted by cardiomyocytes after drug treatment, which provides great potential in drug-induced MI evaluation for clinical application.

Constructing 2D Porous ZnO Gas Sensors Based on Polyvinylpyrrolidone-Assisted Zn-MOF Nanosheets for NO2 Detection

Two-dimensional (2D) ZnO nanomaterials are promising for gas sensing, because of their large surface area, abundant active sites, and rapid charge transfer. However, it is challenging to prepare 2D ZnO nanosheet gas sensors with high sensing performance, due to the tight interlayer stack and low adsorptive property of ZnO for NO2 molecules. Herein, we synthesized Zn-MOF nanosheets employing polyvinylpyrrolidone (PVP) as the structure-directing agent, further through pyrolysis of the Zn-MOF to obtain 2D ZnO nanosheet gas sensors. As anticipated, the 2D ZnO gas sensors exhibited high sensitivity and selectivity for NO2, and the optimal sample could achieve a response value of 162 at the working temperature of 160 °C, which is 10 times higher than that of pristine ZnO. Meanwhile, experimental and DFT results showed that PVP plays critical roles in the lateral lattice growth of 2D Zn-MOF nanosheets, while the existence of PVP makes the ZnO gas sensors with rich porous property and more oxygen vacancy after the pyrolysis process, which promoted the adsorption, activity, and surface reaction for NO2 molecules. It provides a new approach for the application of 2D ZnO nanosheets in the NO2 detection field.

Dynamic Interchain Motion in 1D Tetrathiafulvalene-Based Coordination Polymers for Highly Sensitive Molecular Recognition

The application of electrically conductive 1D coordination polymers (1D CPs) in nanoelectronic molecular recognition is theoretically promising yet rarely explored due to the challenges in their synthesis and optimization of electrical properties. In this regard, two tetrathiafulvalene-based 1D CPs, namely [Co(m-H2TTFTB)(DMF)2(H2O)]n (Co-m-TTFTB), and {[Ni(m-H2TTFTB)(CH3CH2OH)1.5(H2O)1.5]·(H2O)0.5}n (Ni-m-TTFTB) are successfully constructed. The shorter S···S contacts between the [M(solvent)3(m-H2TTFTB)]n chains contribute to a significant improvement in their electrical conductivities. The powder X-ray diffraction (PXRD) under different organic solvents reveals the flexible and dynamic structural characteristic of M-m-TTFTB, which, combined with the 1D morphology, lead to their excellent performance for sensitive detection of volatile organic compounds. Co-m-TTFTB achieves a limit of detection for ethanol vapor down to 0.5 ppm, which is superior to the state-of-the-art chemiresistive sensors based on metal-organic frameworks or organic polymers at room temperature. In situ diffuse reflectance infrared Fourier transform spectroscopy, PXRD measurements and density functional theory calculations reveal the molecular insertion sensing mechanism and the corresponding structure-function relationship. This work expands the applicable scenario of 1D CPs and opens a new realm of 1D CP-based nanoelectronic sensors for highly sensitive room temperature gas detection.

Crystalline Metal-Organic Framework Coatings Engineered via Metal-Phenolic Network Interfaces

Crystalline metal-organic frameworks (MOFs) have garnered extensive attention owing to their highly ordered porous structure and physicochemical properties. However, their practical application often requires their integration with various substrates, which is challenging because of their weakly adhesive nature and the diversity of substrates that exhibit different properties. Herein, we report the use of amorphous metal-phenolic network coatings to facilitate the growth of crystalline MOF coatings on various particle and planar substrates. Crystalline MOFs with different metal ions and morphologies were successfully deposited on substrates (13 types) of varying sizes, shapes, and surface chemistries. Furthermore, the physicochemical properties of the coated crystalline MOFs (e.g., composition, thickness) could be tuned using different synthesis conditions. The engineered MOF-coated membranes demonstrated excellent liquid and gas separation performance, exhibiting a high H2 permeance of 63200 GPU and a H2/CH4 selectivity of 10.19, likely attributable to the thin nature of the coating (~180 nm). Considering the vast array of MOFs available (>90,000) and the diversity of substrates, this work is expected to pave the way for creating a wide range of MOF composites and coatings with potential applications in diverse fields.

Construction of binary metal-organic cage-based materials via a "covalently linked plus cage encapsulated" strategy

A strategy for constructing binary metal-organic cage (MOC)-based materials was developed. The cationic MOCs were covalently linked by organic linkers to a cationic extended network, whereas the anionic MOCs acted as counterions and were encapsulated in the network. Compared with the corresponding unary materials, the binary MOC-based materials exhibited improved porosity and adsorption performance.

Selective detection of food contaminants using engineered gallium-organic frameworks with MD and metadynamics simulations

The exclusion mechanism of food contaminants such as bisphenol A (BPA), Flavonoids (FLA), and Goitrin (GOI) onto the novel gallium-metal organic framework (MOF) and functionalized MOF with oxalamide group (MOF-OX) is evaluated by utilizing molecular dynamics (MD) and Metadynamics simulations. The atoms in molecules (AIM) analysis detected different types of atomic interactions between contaminant molecules and substrates. To assess this procedure, a range of descriptors including interaction energies, root mean square displacement, radial distribution function (RDF), density, hydrogen bond count (HB), and contact numbers are examined across the simulation trajectories. The most important elements in the stability of the systems under examination are found to be stacking π-π and HB interactions. It was confirmed by a significant value of total interaction energy for BPA/MOF-OX (- 338.21 kJ mol-1) and BPA/MOF (- 389.95 kJ mol-1) complexes. Evaluation of interaction energies reveals that L-J interaction plays an essential role in the adsorption of food contaminants on the substrates. The free energy values for the stability systems of BPA/MOF and BPA/MOF-OX complexes at their global minima reached about BPA/MOF = - 254.29 kJ mol-1 and BPA/MOF-OX = - 187.62 kJ mol-1, respectively. Nevertheless, this work provides a new strategy for the preparation of a new hierarchical tree-dimensional of the Ga-MOF hybrid material for the adsorption and exclusion of food contaminates and their effect on human health.

Metal-Organic-Frameworks Based Mixed-Matrix Membranes for CO2 Separation: An Applicable-Conceptual Approach

A promising class of porous crystalline materials, metal-organic frameworks (MOFs), have recently emerged as a potential material in fabricating mixed matrix membranes (MMMs) for gas separation applications. Their unique chemistry and structural versatility offer substantial advantages over conventional fillers. This review gives an in-depth exploration of MOF chemistry, focusing on strategies to manipulate their adsorption behavior to enhance separation properties. We scrutinize the impact of various MOF-based MMM components, including polymer matrix, MOFs fillers and polymer/filler interface, on the overall gas separation performance. This involves a detailed analysis of key parameters associated with MMM preparation. Additionally, we offer a comprehensive overview of the determining factors in MOF-based MMM development for gas separation, including MOF structure, synthesis, and chemistry. Moreover, the most advances in modification strategies of MOF for CO2 separation, such as a wide variety of hybrid MOFs will be outlined, which opens the door to an improved CO2 separation process. Finally, the gas transport mechanisms of MMMs are thoroughly discussed to understand the factors affecting the gas permeation through the polymer matrix, MOFs and interface between them.

Semiconducting 2D Copper(I) Iodide Coordination Polymer as a Potential Chemiresistive Sensor for Methanol

The development of a cost-effective, ultra-selective, and room temperature gas sensor is the need of an hour, owing to the rapid industrialization. Here, a new 2D semiconducting Cu(I) coordination polymer (CP) with 1,4-di(1H-1,2,4-triazol-1-yl)benzene (1,4-TzB) ligand is reported. The CP1 consists of a Cu2I2 secondary building unit bridged by 1,4-TzB, and has high stability as well as semiconducting properties. The chemiresistive sensor, developed by a facile drop-casting method derived from CP1, demonstrates a response value of 66.7 at 100 ppm on methanol exposure, accompanied by swift transient (response and recovery time 17.5 and 34.2 s, respectively) behavior. In addition, the developed sensor displays ultra-high selectivity toward methanol over other volatile organic compounds , boasting LOD and LOQ values of 1.22 and 4.02 ppb, respectively. The CP is found to be a state-of-the-art chemiresistive sensor with ultra-high sensitivity and selectivity toward methanol at room temperature.

Comparative Analysis of the Hydrazine Interaction with Arylene Diimide Derivatives: Complementary Approach Using First Principles Calculation and Experimental Confirmation

Suitable functional group-engineered π-conjugated aromatic dimides based on perylene (PDI) and naphthyl scaffolds (NDI) demonstrated excellent sensitivity toward different gaseous analytes. However, to date, no methodical analysis has been performed to rationalize molecular-level interactions in the context of optical transduction, which is essential for systematic performance optimization of NDI/PDI-based molecular sensors. Therefore, in this present work, NDI/PDI scaffolds have been designed with amino acid functional groups (alanine, ALA and glutamic acid, GLU) at the terminal positions, and we subsequently compared the efficacy of four different imide derivatives as model hosts for hydrazine adsorption. Specifically, the adsorption of hydrazine at different interaction sites has been thoroughly investigated using ab initio calculations, where the adsorption energy, charge transfer, and recovery time have been emphasized. Theoretical results exhibit that irrespective of host specification the COOH groups offer a primary interaction site for hydrazine through the hydrogen bonding interaction. The presence of more COOH groups and relatively stronger interaction with secondary edge oxygen ensure that GLU functional moieties are a superior choice over ALU for efficient hydrazine binding. The molecular energy spectrum analysis exhibits more favorable HOMO/LUMO gap variations after hydrazine interaction in the case of PDI derivatives irrespective to the nature of the amino acid residues. Therefore, by a combination of both factors, PDI-GLU has been identified as the most suitable host molecule for hydrazine among four derivatives. Finally, the key theoretical predictions has been later experimentally validated by analyzing UV-visible spectroscopy and NMR studies, wherein the mechanism of interaction has also been experimentally verified by EPR analysis and FT-IR studies.

Ultrasensitive and Exclusive Chemiresistors with a ZIF-67-Derived Oxide Cage/Nanofiber Co3O4/In2O3 Heterostructure for Acetone Detection

Gas sensors for acetone detection have received considerable attention because acetone has a significant influence on both the environment and human health, e.g., it is flammable and toxic and may be related to blood glucose levels. However, achieving high sensitivity and selectivity at low concentrations is still a great challenge to date. Here, we report a unique chemiresistive gas sensor for acetone detection, which is composed of In2O3 nanofibers loaded with a porous Co-based zeolitic imidazolate framework (ZIF-67)-derived Co3O4 cage prepared by simple electrospinning and solvothermal methods. The ZIF-67-derived oxide cage/nanofiber Co3O4/In2O3 heterostructure has abundant reversible active adsorption/reaction sites and a type-I heterojunction, resulting in an ultrasensitive response of 954-50 ppm acetone at 300 °C. In addition, it demonstrates a low detection limit of 18.8 ppb, a fast response time of 4 s, good selectivity and repeatability, acceptable humidity interference, and long-term stability. With such excellent sensing performance to acetone, our chemiresistive gas sensor could be potentially applied for environmental monitoring and early diagnosis of diabetes.

Base-Directed Formation of Isostructural Lanthanide-Sulfate-Glutarate Coordination Polymers with Photoluminescence

A series of five isostructural 3D lanthanide-based coordination polymers [LnIII2(H2O)6(glu)(SO4)2]n [Ln = Pr(1), Nd(2), Sm(3), Eu(4), and Gd(5)] was effortlessly obtained within a few minutes via the microwave-heating method. The employment of auxiliary bases, that is, sodium hydroxide, 4,4'-bipyridine, and 1,4-diazabicyclo[2.2.2]octane, led to the formation of the title complex, whereas base-free synthesis yielded a three-dimensional inorganic coordination polymer, [Ln2(H2O)4(SO4)3]n·nH2O, Ln = Nd (2a). The robustness of the synthetic method was illustrated as both microwave-heating and conventional hydrothermal techniques also enabled the formation of a high-crystalline phase-pure complex 1-5. In the structure of 1-5, glutarato (glu2-) and sulfato ligands link dinuclear Ln(III) building units into three-dimensional frames. The glu2- ligands act as tethering linkers, expanding the structure into a neutral 3D coordination network. Hydrogen bonds were found to be the predominant intermolecular interactions in the crystal structures. Photoluminescence of the complex 1-5 was studied.

Direct Synthesis of Metal-Organic Framework Sols: Advances and Perspectives

The intrinsic lack of processability in the conventional nano/microcrystalline powder form of metal-organic frameworks (MOFs) greatly limits their application in various fields. Synthesis of MOFs with certain flowability make them promising for multitudinous applications. The direct synthesis strategy represents one of the simplest and efficient method for synthesizing solution processable MOF sols/suspensions, compared with other approaches, for instance, the post-synthesis surface modification, the direct dispersion of MOFs in hindered ionic liquids, as well as the calcination method toward a few MOFs with melting behavior. This article reviews the recent direct synthesis strategies of solution processable MOF sols and their typical applications in different fields. The direct synthesis strategies of MOF sols can be classified into two categories: particle size reduction strategy, and selective coordination strategy. The synthesis mechanism of different strategies and the factors affecting the formation of sols are summarized. The application of solution processable MOF sols in different fields are introduced, showing great application potentials. Furthermore, the challenges faced by the direct synthesis of MOF sols and the main methods to deal with the challenges are emphasized, and the future development trend is prospected.