Wireless Oxygen Sensors Enabled by Fe(II)-Polymer Wrapped Carbon Nanotubes

MXene Key Composites: A New Arena for Gas Sensors

With the development of science and technology, the scale of industrial production continues to grow, and the types and quantities of gas raw materials used in industrial production and produced during the production process are also constantly increasing. These gases include flammable and explosive gases, and even contain toxic gases. Therefore, it is very important and necessary for gas sensors to detect and monitor these gases quickly and accurately. In recent years, a new two-dimensional material called MXene has attracted widespread attention in various applications. Their abundant surface functional groups and sites, excellent current conductivity, tunable surface chemistry, and outstanding stability make them promising for gas sensor applications. Since the birth of MXene materials, researchers have utilized the efficient and convenient solution etching preparation, high flexibility, and easily functionalize MXene with other materials to prepare composites for gas sensing. This has opened a new chapter in high-performance gas sensing materials and provided a new approach for advanced sensor research. However, previous reviews on MXene-based composite materials in gas sensing only focused on the performance of gas sensing, without systematically explaining the gas sensing mechanisms generated by different gases, as well as summarizing and predicting the advantages and disadvantages of MXene-based composite materials. This article reviews the latest progress in the application of MXene-based composite materials in gas sensing. Firstly, a brief summary was given of the commonly used methods for preparing gas sensing device structures, followed by an introduction to the key attributes of MXene related to gas sensing performance. This article focuses on the performance of MXene-based composite materials used for gas sensing, such as MXene/graphene, MXene/Metal oxide, MXene/Transition metal sulfides (TMDs), MXene/Metal-organic framework (MOF), MXene/Polymer. It summarizes the advantages and disadvantages of MXene composite materials with different composites and discusses the possible gas sensing mechanisms of MXene-based composite materials for different gases. Finally, future directions and inroads of MXenes-based composites in gas sensing are presented and discussed.

Wireless Sensor for Meat Freshness Assessment Based on Radio Frequency Communication

Wireless communication technologies, particularly radio frequency (RF), have been widely explored for wearable electronics with secure and user-friendly information transmission. By exploiting the operational principle of chemically actuated resonant devices (CARDs) and the electrical response observed in chemiresistive materials, we propose a simple and hands-on alternative to design and manufacture RF tags that function as CARDs for wireless sensing of meat freshness. Specifically, the RF antennas were meticulously designed and fabricated by lithography onto a flexible substrate with conductive tape, and the RF signal was characterized in terms of amplitude and peak resonant frequency. Subsequently, a single-walled carbon nanotube (SWCNT)/MoS2/In2O3 chemiresistive composite was incorporated into the RF tag to convey it as CARDs. The RF signal was then utilized to establish a correlation between the sensor's electrical response and the RF attenuation signal (reflection coefficient) in the presence of volatile amines and seafood (shrimp) samples. The freshness of the seafood samples was systematically assessed throughout the storage time by utilizing the CARDs, thereby underscoring their effective potential for monitoring food quality. Specifically, the developed wireless tags provide cumulative amine exposure data within the food package, demonstrating a gradual decrease in radio frequency signals. This study illustrates the versatility of RF tags integrated with chemiresistors as a promising pathway toward scalable, affordable, and portable wireless chemical sensors.

ZnO Decorated Graphene-Based NFC Tag for Personal NO2 Exposure Monitoring during a Workday

This paper presents the integration of a sensing layer over interdigitated electrodes and an electronic circuit on the same flexible printed circuit board. This integration provides an effective technique to use this design as a wearable gas measuring system in a target application, exhibiting high performance, low power consumption, and being lightweight for on-site monitoring. The wearable system proves the concept of using an NFC tag combined with a chemoresistive gas sensor as a cumulative gas sensor, having the possibility of holding the data for a working day, and completely capturing the exposure of a person to NO2 concentrations. Three different types of sensors were tested, depositing the sensing layers on gold electrodes over Kapton substrate: bare graphene, graphene decorated with 5 wt.% zinc oxide nanoflowers, or nanopillars. The deposited layers were characterized using FESEM, EDX, XRD, and Raman spectroscopy to determine their crystalline structure, morphological and chemical compositions. The gas sensing performance of the sensors was analyzed against NO2 (dry and humid conditions) and other interfering species (dry conditions) to check their sensitivity and selectivity. The resultant-built wearable NFC tag system accumulates the data in a non-volatile memory every minute and has an average low power consumption of 24.9 µW in dynamic operation. Also, it can be easily attached to a work vest.

Wireless Detection of Trace Ammonia: A Chronic Kidney Disease Biomarker

Elevated levels of ammonia in breath can be linked to medical complications, such as chronic kidney disease (CKD), that disturb the urea balance in the body. However, early stage CKD is usually asymptomatic, and mass screening is hindered by high instrumentation and operation requirements and accessible and reliable detection methods for CKD biomarkers, such as trace ammonia in breath. Enabling methods would have significance in population screening for early stage CKD patients. We herein report a method to effectively immobilize transition metal selectors in close proximity to a single-walled carbon nanotube (SWCNT) surface using pentiptycene polymers containing metal-chelating backbone structures. The robust and modular nature of the pentiptycene metallopolymer/SWCNT complexes creates a platform that accelerates sensor discovery and optimization. Using these methods, we have identified sensitive, selective, and robust copper-based chemiresistive ammonia sensors that display low parts per billion detection limits. We have added these hybrid materials to the resonant radio frequency circuits of commercial near-field communication (NFC) tags to achieve robust wireless detection of ammonia at physiologically relevant levels. The integrated devices offer a noninvasive and cost-effective approach for early detection and monitoring of CKD.

"Visualization" Gas-Gas Sensors Based on High Performance Novel MXenes Materials

The detection of toxic, harmful, explosive, and volatile gases cannot be separated from gas sensors, and gas sensors are also used to monitor the greenhouse effect and air pollution. However, existing gas sensors remain with many drawbacks, such as lower sensitivity, lower selectivity, and unstable room temperature detection. Thus, there is an imperative need to find more suitable sensing materials. The emergence of a new 2D layered material MXenes has brought dawn to solve this problem. The multiple advantages of MXenes, namely high specific surface area, enriched terminal functionality groups, hydrophilicity, and good electrical conductivity, make them among the most prolific gas-sensing materials. Therefore, this review paper describes the current main synthesis methods of MXenes materials, and focuses on summarizing and organizing the latest research results of MXenes in gas sensing applications. It also introduces the possible gas sensing mechanisms of MXenes materials on NH3 , NO2 , CH3 , and volatile organic compounds (VOCs). In conclusion, it provides insight into the problems and upcoming challenges of MXenes materials for gas sensing.

Miniaturized wireless sensor enables real-time monitoring of food spoilage

Food spoilage results in food waste and food-borne diseases. Yet, standard laboratory tests to determine spoilage (mainly volatile biogenic amines) are not performed regularly by supply chain personnel or end customers. Here we developed a poly(styrene-co-maleic anhydride)-based, miniature (2 × 2 cm²) sensor for on-demand spoilage analysis via mobile phones. To demonstrate a real-life application, the wireless sensor was embedded into packaged chicken and beef; consecutive readings from meat samples using the sensor under various storage conditions enabled the monitoring of spoilage. While samples stored at room temperature showed an almost 700% change in sensor response on the third day, those stored in the freezer resulted in an insignificant change in sensor output. The proposed low-cost, miniature wireless sensor nodes can be integrated into packaged foods, helping consumers and suppliers detect spoilage of protein-rich foods on demand, and ultimately preventing food waste and food-borne diseases.

Smartphone-Operated Wireless Chemical Sensors: A Review

Wireless chemical sensors have been developed as a result of advances in chemical sensing and wireless communication technology. Because of their mobility and widespread availability, smartphones have been extensively combined with sensors such as hand-held detectors, sensor chips, and test strips for biochemical detection. Smartphones are frequently used as controllers, analyzers, and displayers for quick, authentic, and point-of-care monitoring, which may considerably streamline the design and lower the cost of sensing systems. This study looks at the most recent wireless and smartphone-supported chemical sensors. The review is divided into four different topics that emphasize the basic types of wireless smartphone-operated chemical sensors. According to a study of 114 original research publications published during recent years, market opportunities for wireless and smartphone-supported chemical sensor systems include environmental monitoring, healthcare and medicine, food quality, sport, and fitness. The issues and illustrations for each of the primary chemical sensors relevant to many application areas are covered. In terms of performance, the advancement of technologies related to chemical sensors will result in smaller and more lightweight, cost-effective, versatile, and durable devices. Given the limitations, we suggest that wireless and smartphone-supported chemical sensor systems play a significant role in the sensor Internet of Things.

Flexible Wearables for Plants

The excellent stretchability and biocompatibility of flexible sensors have inspired an emerging field of plant wearables, which enable intimate contact with the plants to continuously monitor the growth status and localized microclimate in real-time. Plant flexible wearables provide a promising platform for the development of plant phenotype and the construction of intelligent agriculture via monitoring and regulating the critical physiological parameters and microclimate of plants. Here, the emerging applications of plant flexible wearables together with their pros and cons from four aspects, including physiological indicators, surrounding environment, crop quality, and active control of growth, are highlighted. Self-powered energy supply systems and signal transmission mechanisms are also elucidated. Furthermore, the future opportunities and challenges of plant wearables are discussed in detail.

Flexible Chemiresistive Cyclohexanone Sensors Based on Single-Walled Carbon Nanotube-Polymer Composites

We report a chemiresistive cyclohexanone sensor on a flexible substrate based on single-walled carbon nanotubes (SWCNTs) functionalized with thiourea (TU) derivatives. A wrapper polymer containing both 4-vinylpyridine (4VP) groups and azide groups (P(4VP-VBAz)) was employed to obtain a homogeneous SWCNT dispersion via noncovalent functionalization of SWCNTs. The P(4VP-VBAz)-SWCNT composite dispersion was then spray-coated onto an organosilanized flexible poly(ethylene terephthalate) (PET) film to achieve immobilizing quaternization between the pyridyl groups from the polymer and the functional PET substrate, thereby surface anchoring SWCNTs. Subsequent surface functionalization was performed to incorporate a TU selector into the composites, resulting in P(Q4VP-VBTU)-SWCNT, for the detection of cyclohexanone via hydrogen bonding interactions. An increase in conductance was observed as a result of the hydrogen-bonded complex with cyclohexanone resulting in a higher hole density and/or mobility in SWCNTs. As a result, a sensor device fabricated with P(Q4VP-VBTU)-SWCNT composites exhibited chemiresistive responses (ΔG/G₀) of 7.9 ± 0.6% in N₂ (RH 0.1%) and 4.7 ± 0.4% in air (RH 5%), respectively, upon exposure to 200 ppm cyclohexanone. Selective cyclohexanone detection was achieved with minor responses (ΔG/G₀ < 1.4% at 500 ppm) toward interfering volatile organic compounds (VOC). analytes. We demonstrate a robust sensing platform using the polymer-SWCNT composites on a flexible PET substrate for potential application in wearable sensors.

Wireless Tags with Hybrid Nanomaterials for Volatile Amine Detection

Quality control in the production and processing of raw meat is currently one of the biggest concerns for food industry and would benefit from portable and wireless sensors capable of detecting the onset of spoilage. Raw meat is a natural source of biogenic and volatile amines as byproducts of decarboxylation reactions, and the levels of these compounds can be utilized as quality control parameters. We report herein a hybrid chemiresistor sensor based on inorganic nanofibers of SiO₂:ZnO (an n-type material) and single-walled carbon nanotubes functionalized with 3,5-dinitrophenyls (a p-type material) with dosimetric sensitivity ∼40 times higher for amines than for other volatile organic compounds, which also provides excellent selectivity. The hybrid nanomaterial-based chemiresistor sensory material was used to convert radio-frequency identification tags into chemically actuated resonant devices, which constitute wireless sensors that can be potentially employed in packaging to report on the quality of meat. Specifically, the as-developed wireless tags report on cumulative amine exposure inside the meat package, showing a decrease in radio-frequency signals to the point wherein the sensor ceased to be smartphone-readable. These hybrid material-modified wireless tags offer a path to scalable, affordable, portable, and wireless chemical sensor technology for food quality monitoring without the need to open the packaging.

Intelligent Packaging for Real-Time Monitoring of Food-Quality: Current and Future Developments

Food packaging encompasses the topical role of preserving food, hence, extending the shelf-life, while ensuring the highest quality and safety along the production chain as well as during storage. Intelligent food packaging further develops the functions of traditional packages by introducing the capability of continuously monitoring food quality during the whole chain to assess and reduce the insurgence of food-borne disease and food waste. To this purpose, several sensing systems based on different food quality indicators have been proposed in recent years, but commercial applications remain a challenge. This review provides a critical summary of responsive systems employed in the real-time monitoring of food quality and preservation state. First, food quality indicators are briefly presented, and subsequently, their exploitation to fabricate intelligent packaging based on responsive materials is discussed. Finally, current challenges and future trends are reviewed to highlight the importance of concentrating efforts on developing new functional solutions.

Breath Acetone Sensing Based on Single-Walled Carbon Nanotube-Titanium Dioxide Hybrids Enabled by a Custom-Built Dehumidifier

Acetone is a metabolic byproduct found in the exhaled breath and can be measured to monitor the metabolic degree of ketosis. In this state, the body uses free fatty acids as its main source of fuel because there is limited access to glucose. Monitoring ketosis is important for type I diabetes patients to prevent ketoacidosis, a potentially fatal condition, and individuals adjusting to a low-carbohydrate diet. Here, we demonstrate that a chemiresistor fabricated from oxidized single-walled carbon nanotubes functionalized with titanium dioxide (SWCNT@TiO₂) can be used to detect acetone in dried breath samples. Initially, due to the high cross sensitivity of the acetone sensor to water vapor, the acetone sensor was unable to detect acetone in humid gas samples. To resolve this cross-sensitivity issue, a dehumidifier was designed and fabricated to dehydrate the breath samples. Sensor response to the acetone in dried breath samples from three volunteers was shown to be linearly correlated with the two other ketone bodies, acetoacetic acid in urine and β-hydroxybutyric acid in the blood. The breath sampling and analysis methodology had a calculated acetone detection limit of 1.6 ppm and capable of detecting up to at least 100 ppm of acetone, which is the dynamic range of breath acetone for someone with ketosis. Finally, the application of the sensor as a breath acetone detector was studied by incorporating the sensor into a handheld prototype breathalyzer.

Paper-Based Enzyme Biosensor for One-Step Detection of Hypoxanthine in Fresh and Degraded Fish

Food freshness monitoring, which can reflect the quality of the product at the time of use, remains a great challenge for consumers and the food industry. Herein, we report the development of a cost-effective enzyme-based paper biosensor, which can monitor fish freshness and predict spoilage. The biosensor measures the release of hypoxanthine (HX), an indicator of meat and fish degradation, using the enzymatic conversion of HX by xanthine oxidase (XOD). We demonstrate that the entrapment of XOD and an organic dye, nitro blue tetrazolium chloride (NBT), within a sol-gel biohybrid enables their stabilization on paper and promotes the enzymatic reaction with further retention of the reaction products within the cellulosic network . Linearity in the micromolar concentration range with a detection limit of 3.7 μM for HX is obtained. The biosensor has high selectivity toward HX and is manufactured in few steps from inexpensive widely available materials. The applicability of the biosensor is demonstrated by following fish degradation over time and measuring HX concentrations ranging from 117 (±9) to 198 (±5) μM within 24 h of degradation, at levels that are comparable with those measured by a commercial enzymatic kit for HX detection. As compared to the commercial kit, our biosensors are more cost-effective, do not require addition of exogenous reagents and are portable, having all of the reagents needed for analysis embedded within the sensing platform. This proof-of-concept work demonstrates that the paper-based HX biosensor has potential as a robust reagentless device for real-time monitoring of food freshness and for other applications in which HX plays an important role.

Functional Single-Walled Carbon Nanotubes for Anion Sensing

We report an anion-sensing platform wherein conductance changes are triggered by chemical interactions between selectors and anions. The selector design incorporates both a cationic moiety (i.e., pyridinium) and a thiourea-based dual-hydrogen-bond donor. Anion binding by a model selector (2) was studied using ¹H NMR and UV-vis titrations, which reveal a binding strength toward acetate ions (AcO^-) followed by Cl^- > Br^- > NO₃^-. These studies reveal that selector 2 is deprotonated upon addition of AcO^-, whereas it undergoes hydrogen bonding associated with Cl^-, Br^-, and NO₃^-. The cationic pyridinium moiety improves anion binding affinity by lowering the pK_a value of selector 2 and enhancing the hydrogen-bond donor capability as confirmed by spectroscopic titrations and DFT calculations. The selector is covalently attached to poly(4-vinylpyridine) (P4VP), which wraps single-walled carbon nanotubes (SWCNTs) (i.e., P4VP-2-SWCNT) to transduce an electrical signal. As a result, continuous anion sensing was achieved with high sensitivity represented by a normalized resistance change of 101.9 ± 10.3% toward 16.7 mM AcO^-, whereas negligible sensitivity was observed toward Cl^-, Br^-, and NO₃^-. The sensitivity transition was attributed to the internal charge transfer of 2 by deprotonation of the thiourea proton upon addition of AcO^-.

Highly Sensitive and Contactless Ammonia Detection Based on Nanocomposites of Phosphate-Functionalized Reduced Graphene Oxide/Polyaniline Immobilized on Microstrip Resonators

Ammonia is a key compound in a variety of industrial sectors, including automotive, chemical, and food. Its hazardous effects on the environment and human health require the implementation of proper safety guidelines and monitoring techniques. An attractive approach is to add sensing functionality to low-cost wireless communication devices to allow for the monitoring/mapping of the chemical environment across a large area. This study outlines a highly sensitive contactless ammonia gas sensor with the potential for continuous and wireless mapping of ammonia emissions by integrating an antenna on the device. The devices were fabricated by casting a novel advanced sensing nanocomposite, polyaniline (PANI), and phosphate-functionalized reduced graphene oxide (P-rGO) on split-ring resonators (SRRs). P-rGO incorporation in PANI produced a positive-sensing synergistic effect to multiply the sensing response severalfold to ammonia and dimethylamine gases. Furthermore, we identified that the modification of the semiconductive behavior of the nanosheets, achieved via phosphate functionalization, is the key factor to the positive-sensing synergy observed in the nanocomposites because of the formation of localized heterojunctions. The prepared SRRs exhibited remarkably a low detection limit, ∼1 ppm, to ammonia gas, as well as good stability and selectivity, which paves the path for a novel generation of wireless, chipless, potentially fully printable, and passive sensor platforms.

The Investigation of a SAW Oxygen Gas Sensor Operated at Room Temperature, Based on Nanostructured ZnxFeyO Films

In this paper, we report a wireless gas sensor based on surface acoustic waves (SAW). For room temperature detection of oxygen gas, a novel nanostructured Zn_xFe_yO gas-sensitive film was deposited on the surface of a SAW resonator by an oblique magnetron co-sputtering method. The measurements of X-ray diffraction (XRD) and a scanning electron microscope (SEM) showed that the crystal phase composition and the microstructures of Zn_xFe_yO films were significantly affected by the content of Fe. The experimental results showed that the sensors had a good response to O₂ at room temperature. The max frequency shift of the sensors reached 258 kHz as the O₂ partial pressure was 20%. Moreover, X-ray photoelectron spectroscopy (XPS) was performed to analyze the role of Fe in the sensitization process of the Zn_xFe_yO film. In addition, the internal relationship between the Fe content of the film and the sensitivity of the sensor was presented and discussed. The research indicates that the nanostructured Zn_xFe_yO film has a good potential for room temperature O₂ gas detection applications.

The Investigation of High-Temperature SAW Oxygen Sensor Based on ZnO Films

In this paper, a wireless oxygen sensor based on a surface acoustic wave (SAW) was reported. For high-temperature applications, novel Al₂O₃/ZnO/Pt multilayered conductive film was deposited on langasite substrate as the electrodes, and ZnO film obtained by the pulse laser deposition (PLD) method was used as the sensitive film. The measurements of X-ray diffraction (XRD) and a scanning electron microscope (SEM) showed that the c-axis orientation of the ZnO grains and the surface morphology of the films were regulated by the deposition temperature. Meanwhile, the gas response of the sensor was strongly dependent on the surface morphology of the ZnO film. The experimental results showed that the oxygen gas sensor could operate at a high-temperature environment up to 850 °C with good stability for a long period. The max frequency shift of the sensors reaches 310 kHz, when exposed to 40% O₂ gas at 850 °C. The calculated standard error of the sensors in a high-temperature measurement process is within 3%. Additionally, no significant signal degradation could be observed in the long-term experimental period. The prepared SAW oxygen gas sensor has potential applications in high-temperature sensing systems.

Carbon Nanotube Chemical Sensors

Carbon nanotubes (CNTs) promise to advance a number of real-world technologies. Of these applications, they are particularly attractive for uses in chemical sensors for environmental and health monitoring. However, chemical sensors based on CNTs are often lacking in selectivity, and the elucidation of their sensing mechanisms remains challenging. This review is a comprehensive description of the parameters that give rise to the sensing capabilities of CNT-based sensors and the application of CNT-based devices in chemical sensing. This review begins with the discussion of the sensing mechanisms in CNT-based devices, the chemical methods of CNT functionalization, architectures of sensors, performance parameters, and theoretical models used to describe CNT sensors. It then discusses the expansive applications of CNT-based sensors to multiple areas including environmental monitoring, food and agriculture applications, biological sensors, and national security. The discussion of each analyte focuses on the strategies used to impart selectivity and the molecular interactions between the selector and the analyte. Finally, the review concludes with a brief outlook over future developments in the field of chemical sensors and their prospects for commercialization.

Switchable Single-Walled Carbon Nanotube-Polymer Composites for CO2 Sensing

We report a chemiresistive CO₂ sensor based on single-walled carbon nanotubes (SWCNTs) noncovalently functionalized with a CO₂ switchable copolymer containing amidine pendant groups that transform into amidinium bicarbonates in response to CO₂. To fabricate a robust surface-anchored polymer-SWCNT dispersion via spray coating, we first designed and synthesized a precursor copolymer, P(4VP-VBAz), bearing both 4-vinylpyridine (4VP) groups and azide groups. The SWCNT dispersant group, 4VP, is capable of debundling and stabilizing nanotubes to improve their solubility in organic solvents for solution processing. Well-dispersed P(4VP-VBAz)-SWCNT composites are covalently immobilized onto a glass substrate functionalized with alkyl bromides, and then the amidine moieties are subsequently attached to form the resulting CO₂-switchable P(Q4VP-VBAm)-SWCNT composites via a copper(I)-catalyzed azide-alkyne cycloaddition click reaction at the film surface. The amidine groups are strong donors that compensate or pin carriers in the SWCNTs. In the presence of CO₂ under humid conditions, the generated amidinium bicarbonates from the polymer wrapping increase the concentration and/or liberate the hole carriers in the nanotubes, thereby increasing the net conductance of the composites. The amidinium moieties revert back to the amidines when purged with a CO₂-free carrier gas with a reversible decrease in conductance. We also demonstrate high selectivity to CO₂ over the other atmospheric gases such as O₂ and Ar.

Highly Sensitive, Temperature-Independent Oxygen Gas Sensor Based on Anatase TiO2 Nanoparticle Grafted, 2D Mixed Valent VO x Nanoflakelets

Herein, we report a facile approach for the synthesis of TiO₂ nanoparticles tethered on 2D mixed valent vanadium oxide (VO _x/TiO₂) nanoflakelets using a thermal decomposition assisted hydrothermal method and investigation of its temperature-independent performance enhancement in oxygen-sensing properties. The material was structurally characterized using XRD, TEM, Raman, DSC, and XPS analysis. The presence of mixed valent states, such as V₂O₅ and VO₂ in VO _x, and the metastable properties of VO₂ have been found to play crucial roles in the temperature-independent electrical conductivity of VO _x/TiO₂ nanoflakelets. Though pristine VO _x exhibited characteristic semiconductor-to-metal transition of monoclinic VO₂, pure VO _x nanoflakelets exhibited poor sensitivity toward sensing oxygen. VO _x/TiO₂ nanoflakelets showed a very low temperature coefficient of resistance above 150 °C with improved sensitivity (35 times higher than VO _x for 100 ppm) toward oxygen gas. VO _x/TiO₂ nanoflakelets exhibited much higher response, faster adsorption and desorption toward oxygen as compared to pristine VO _x beyond 100 °C, which endowed the sensor with excellent temperature-independent sensor properties within 150-500 °C. The faster adsorption and desorption after 100 °C led to shorter response time (3-5 s) and recovery time (7-9 s). The results suggest that 2D VO _x/TiO₂ can be a promising candidate for temperature-independent oxygen sensor applications.

Sensor Technologies Empowered by Materials and Molecular Innovations

Functional synthetic designer materials can impact many advanced technologies, and the chemical sensor area is intimately reliant on these new chemical innovations. The transduction of chemical and biological signals is necessary for low cost omnipresent chemical sensing and will be realized by chemical designs of new transduction materials. We are poised for many new innovations to empower new generations of sensor technologies. Materials innovations promise to expand the capabilities of present hardware, drive down the cost, and ensure broad implementation of these methods.

The secondary structures of PEG-functionalized random copolymers derived from (R)- and (S)- families of alkyne polycarbodiimides

Macromolecular micelles: a hydrophobic polyamidine backbone surrounded by hydrophilic PEG chains.