Ultrarobust Biochips with Metal-Organic Framework Coating for Point-of-Care Diagnosis

One-pot green synthesis of ZIF-8/IgG composite for the precise orientation and protection of antibody and its application in purification and detection of aflatoxins in peanut oil

This study presents a novel approach toward the one-pot green synthesis of ZIF-8/IgG composite, focusing on its precise orientation and protection of the anti-aflatoxins antibody. The antibody orientation is achieved through the specific binding of IgG to the Fc region of the antibody, while the antibody protection is accomplished by the structural change restriction of ZIF-8 framework to the antibody. Consequently, the antibody exhibits enhanced target capability and significantly improved tolerance to organic solvents. The ZIF-8/IgG/anti-AFT was employed for the purification and detection of AFTs by coupling with UPLC. Under optimized conditions, the recoveries of spiked AFTs in peanut oils are between 86.1% and 106.4%, with relative standard deviations (RSDs) ranging from 0.8% to 8.8%. The linearity range is 0.5-20.0 ng for AFB1 and AFG1, 0.125-5.0 ng for AFB2 and AFG2, the limit of detection is 0.1 ng for AFB1 and AFG1, 0.03 ng for AFB2 and AFG2.

Metal-Organic Frameworks Based Sensor Platforms for Rapid Detection of Contaminants in Wastewater

Metal-organic frameworks (MOFs) are a type of multifunctional material with organic-inorganic doped metal complexes that have a lot of unsaturated metal sites and a consistent network structure. MOFs work has great performance for enhancing the mass transfer, signal, and sensitivity as well as analyte enrichment. This study highlights the recent advancements of MOFs-based sensors for pollutant detection in a water environment and summarizes the effect of various synthetic materials on the performance of MOFs-based sensors. The related challenges and optimization techniques have been discussed. Then the research results of various MOFs sensors in the detection of wastewater pollutants are analyzed. Finally, the challenges facing MOFs-based water sensor development and the outlook for future research are discussed.

COVID-19 Virus Structural Details: Optical and Electrochemical Detection

The increasing viral species have ruined people's health and the world's economy. Therefore, it is urgent to design bio-responsive materials to provide a vast platform for detecting a different family's passive or active virus. One can design a reactive functional unit for that moiety based on the particular bio-active moieties in viruses. Nanomaterials as optical and electrochemical biosensors have enabled better tools and devices to develop rapid virus detection. Various material science platforms are available for real-time monitoring and detecting COVID-19 and other viral loads. In this review, we discuss the recent advances of nanomaterials in developing the tools for optical and electrochemical sensing COVID-19. In addition, nanomaterials used to detect other human viruses have been studied, providing insights for developing COVID-19 sensing materials. The basic strategies for nanomaterials develop as virus sensors, fabrications, and detection performances are studied. Moreover, the new methods to enhance the virus sensing properties are discussed to provide a gateway for virus detection in variant forms. The study will provide systematic information and working of virus sensors. In addition, the deep discussion of structural properties and signal changes will offer a new gate for researchers to develop new virus sensors for clinical applications.

Application of metal-organic frameworks-based functional composite scaffolds in tissue engineering

With the rapid development of materials science and tissue engineering, a variety of biomaterials have been used to construct tissue engineering scaffolds. Due to the performance limitations of single materials, functional composite biomaterials have attracted great attention as tools to improve the effectiveness of biological scaffolds for tissue repair. In recent years, metal-organic frameworks (MOFs) have shown great promise for application in tissue engineering because of their high specific surface area, high porosity, high biocompatibility, appropriate environmental sensitivities and other advantages. This review introduces methods for the construction of MOFs-based functional composite scaffolds and describes the specific functions and mechanisms of MOFs in repairing damaged tissue. The latest MOFs-based functional composites and their applications in different tissues are discussed. Finally, the challenges and future prospects of using MOFs-based composites in tissue engineering are summarized. The aim of this review is to show the great potential of MOFs-based functional composite materials in the field of tissue engineering and to stimulate further innovation in this promising area.

CA19-9 and CEA biosensors in pancreatic cancer

Cancer is a complex pathophysiological condition causing millions of deaths each year. Early diagnosis is essential especially for pancreatic cancer. Existing diagnostic tools rely on circulating biomarkers such as Carbohydrate Antigen 19-9 (CA19-9) and Carcinoembryonic Antigen (CEA). Unfortunately, these markers are nonspecific and may be increased in a variety of disorders. Accordingly, diagnosis of pancreatic cancer generally involves more invasive approaches such as biopsy as well as imaging studies. Recent advances in biosensor technology have allowed the development of precise diagnostic tools having enhanced analytical sensitivity and specificity. Herein we examine these advances in the detection of cancer in general and in pancreatic cancer specifically. Furthermore, we highlight novel technologies in the measurement of CA19-9 and CEA and explore their future application in the early detection of pancreatic cancer.

Recent advances in surface-mounted metal-organic framework thin film coatings for biomaterials and medical applications: a review

Coatings of metal-organic frameworks (MOFs) have potential applications in surface modification for medical implants, tissue engineering, and drug delivery systems. Therefore, developing an applicable method for surface-mounted MOF engineering to fabricate protective coating for implant tissue engineering is a crucial issue. Besides, the coating process was desgined for drug infusion and effect opposing chemical and mechanical resistance. In the present review, we discuss the techniques of MOF coatings for medical application in both in vitro and in vivo in various systems such as in situ growth of MOFs, dip coating of MOFs, spin coating of MOFs, Layer-by-layer methods, spray coating of MOFs, gas phase deposition of MOFs, electrochemical deposition of MOFs. The current study investigates the modification in the implant surface to change the properties of the alloy surface by MOF to improve properties such as reduction of the biofilm adhesion, prevention of infection, improvement of drugs and ions rate release, and corrosion resistance. MOF coatings on the surface of alloys can be considered as an opportunity or a restriction. The presence of MOF coatings in the outer layer of alloys would significantly demonstrate the biological, chemical and mechanical effects. Additionally, the impact of MOF properties and specific interactions with the surface of alloys on the anti-microbial resistance, anti-corrosion, and self-healing of MOF coatings are reported. Thus, the importance of multifunctional methods to improve the adhesion of alloy surfaces, microbial and corrosion resistance and prospects are summarized.

Preservation of Proteins in Human Plasma through Metal-Organic Framework Encapsulation

Traditional cold chain systems of collection, transportation, and storage of biofluid specimens for eventual analysis pose a huge financial and environmental burden. These systems are impractical in pre-hospital and resource-limited settings, where refrigeration and electricity are not reliable or even available. Here, we develop an innovative technology using metal-organic frameworks (MOFs), a novel class of organic-inorganic hybrids with high thermal stability, as encapsulates for preserving the integrity of protein biomarkers in biofluids under ambient or non-refrigerated storage conditions. We encapsulate prostate-specific antigen (PSA) in whole patient plasma using hydrophilic zeolitic imidazolate framework-90 (ZIF-90) for preservation at 40 °C for 4 weeks and eventual on-demand reconstitution for antibody-based assays with recovery above 95% compared to storage at -20 °C. Without ZIF-90 encapsulation, only 10-30% of the PSA immunoactivity remained. Furthermore, we demonstrate encapsulation of multiple cancer biomarker proteins in whole patient plasma using ZIF-8 or ZIF-90 encapsulants for eventual on-demand reconstitution and analysis after 1 week at 40 °C. Overall, MOF encapsulation of patient biofluids is important as climate change may be affecting the stability and increase costs of maintaining biospecimen cold chain custody for the collection, transportation, and storage of biospecimens prior to analysis or for biobanking regardless of any countries' affluence.

Printed Ultrastable Bioplasmonic Microarrays for Point-of-Need Biosensing

Paper-based point-of-need (PON) biosensors are attractive for various applications, including food safety, agriculture, disease diagnosis, and drug screening, owing to their low cost and ease of use. However, existing paper-based biosensors mainly rely on biolabels, colorimetric reagents, and biorecognition elements and exhibit limited stability under harsh environments. Here, we report a label-free paper-based biosensor composed of bioplasmonic microarrays for sensitive detection and quantification of protein targets in small volumes of biofluids. Bioplasmonic microarrays were printed using an ultrastable bioplasmonic ink, rendering the PON sensors excellent thermal, chemical, and biological stability for their reliable performance in resource-limited settings. We fabricated silicone hydrophobic barriers and bioplasmonic microarrays with direct writing and droplet jetting approaches on a three-dimensional (3D) nanoporous paper. Direct writing hydrophobic barriers can define hydrophilic channels less than 100 μm wide. High-resolution patterning of hydrophilic test domains enables the handling and analysis of small fluid volumes. We show that the plasmonic sensors based on a vertical flow assay provide similar sensitivity and low limit of detection with a 60 μL sample volume compared to those with 500 μL samples based on an immersion approach and can shorten assay time from 90 to 20 min.

Dual biomineralized metal-organic frameworks-mediated conversion of chemical energy to electricity enabling portable PEC sensing of telomerase activity in bladder cancer tissues

In this work, we report on a portable photoelectrochemical (PEC) sensing system for telomerase activity detection based on dual biomineralized ZIF-8 nanoparticles (NPs)-medicated conversion of chemical energy to electricity and terminal deoxynucleoside transferase (TdTase)-catalyzed elongation of Y-junction DNA structure. Two kinds of biomineralized ZIF-8 NPs including glucose oxidase (GOx)-encapsulated ZIF-8 (GZIF) and horseradish peroxidase (HRP)-encapsulated ZIF-8 (HZIF) are involved in this assay system. The recognition of telomerase is started with telomerase-catalyzed elongation of a telomerase substrate (TS) primer, which generates a longer elongation chain to trigger the formation of a Y-junction DNA structure. The Y-junction DNA with abundant 3'-OH terminal and small steric hindrance facilitates the implement of TdTase-catalyzed elongation reaction, in which the branches of Y-junction DNA are elongated and endowed with biotin moiety to capture streptavidin-modified GZIF (SA-GZIF). The signal transduction is then achieved on a luminol/HZIF/CdS-based photoelectrode. Once the H₂O₂ produced from GZIF-catalyzed hydrolysis of glucose is introduced to the photoelectrode, chemiluminescence of HRP-luminol-H₂O₂-p-iodo-phenol (PIP) system confined in HZIF is activated to excite photocurrent of CdS NPs, which is then recorded by a portable digital multimeter (DMM). The developed PEC sensing system possesses a wide calibration range from 50 to 5000 HeLa cells and a low detection limit of 46 cells. Significantly, the sensing platform is successfully applied to evaluate the telomerase activity in resected bladder tumor tissues. This work not only provides a diagnostic tool for telomerase-related diseases but also open a new avenue for establishing PEC assay methods using metal-organic framework (MOF) NPs.

Metal-organic frameworks for chemical sensing devices

Metal-organic frameworks (MOFs) are exceptionally large surface area materials with organized porous cages that have been investigated for nearly three decades. Due to the flexibility in their design and predisposition toward functionalization, they have shown promise in many areas of application, including chemical sensing. Consequently, they are identified as advanced materials with potential for deployment in analytical devices for chemical and biochemical sensing applications, where high sensitivity is desirable, for example, in environmental monitoring and to advance personal diagnostics. To keep abreast of new research, which signposts the future directions in the development of MOF-based chemical sensors, this review examines studies since 2015 that focus on the applications of MOF films and devices in chemical sensing. Various examples that use MOF films in solid-state sensing applications were drawn from recent studies based on electronic, electrochemical, electromechanical and optical sensing methods. These examples underscore the readiness of MOFs to be integrated in optical and electronic analytical devices. Also, preliminary demonstrations of future sensors are indicated in the performances of MOF-based wearables and smartphone sensors. This review will inspire collaborative efforts between scientists and engineers working within the field of MOFs, leading to greater innovations and accelerating the development of MOF-based analytical devices for chemical and biochemical sensing applications.

Metal-Organic Frameworks for Preserving the Functionality of Plasmonic Nanosensors

Preserving the functionality of nanosensors is critical for their reliable performance under harsh environmental conditions. Biofunctionalized plasmonic nanostructures are an important class of bionanoconjugates for biosensing, bioimaging, and nanotherapeutics. Plasmonic nanostructures and biomolecules exhibit poor thermal stability over time. Here, we report a class of metal-organic framework, zeolitic imidazolate framework-8 (ZIF-8), as a protective coating for preserving plasmonic nanostructures and plasmonic bionanoconjugates at elevated temperature. Gold nanobipyramids (AuNBPs) with sharp tips are attractive plasmonic nanotransducers with high sensitivity but are prone to structural change and loss of sensitivity. This work reports the first observation that ZIF-8 can preserve the structure of AuNBPs and their corresponding strong electromagnetic field enhancement and high refractive index sensitivity. In addition, ZIF-8 coating enables nearly 100% retention of biorecognition capability of antibodies immobilized on the AuNBP surface after exposure to 60 °C for 48 h. The efficacy, versatility, and facile implementation of ZIF-8 coating offer great promise for the preservation of nanosensors.

Metal-Organic-Framework-Engineered Enzyme-Mimetic Catalysts

Nanomaterial-based enzyme-mimetic catalysts (Enz-Cats) have received considerable attention because of their optimized and enhanced catalytic performances and selectivities in diverse physiological environments compared with natural enzymes. Recently, owing to their molecular/atomic-level catalytic centers, high porosity, large surface area, high loading capacity, and homogeneous structure, metal-organic frameworks (MOFs) have emerged as one of the most promising materials in engineering Enz-Cats. Here, the recent advances in the design of MOF-engineered Enz-Cats, including their preparation methods, composite constructions, structural characterizations, and biomedical applications, are highlighted and commented upon. In particular, the performance, selectivities, essential mechanisms, and potential structure-property relations of these MOF-engineered Enz-Cats in accelerating catalytic reactions are discussed. Some potential biomedical applications of these MOF-engineered Enz-Cats are also breifly proposed. These applications include, for example, tumor therapies, bacterial disinfection, tissue regeneration, and biosensors. Finally, the future opportunities and challenges in emerging research frontiers are thoroughly discussed. Thereby, potential pathways and perspectives for designing future state-of-the-art Enz-Cats in biomedical sciences are offered.

Ultrastable Plasmonic Bioink for Printable Point-Of-Care Biosensors

Point-of-care biosensors are critically important for early disease diagnosis and timely clinical intervention in resource-limited settings. The real-world application of these biosensors requires the use of stable biological reagents and cost-effective fabrication approaches. To meet these stringent requirements, we introduce a generic encapsulation strategy to realize ultrastable plasmonic bioink by encapsulating antibodies with an organosiloxane polymer through in situ polymerization. Plasmonic nanostructures serve as sensitive nanotransducers, allowing for label-free biochemical detection. The plasmonic bioink with encapsulated antibodies exhibits excellent thermal, biological, and colloidal stabilities making it compatible with printing process. As a proof-of-concept, we demonstrate the printability of the ultrastable plasmonic bioinks on different types of substrates with direct writing techniques. The organosiloxane polymer preserves the biorecognition capabilities of the biosensors under harsh conditions, including elevated temperature, exposure to chemical/biological denaturants, and ultrasonic agitation. Plasmonic biochips fabricated with the ultrastable ink exhibit superior stability compared to the biochips with unencapsulated antibodies.

Applications of Functional Metal-Organic Frameworks in Biosensors

In recent decades, fast advancements in the fields of metal-organic frameworks (MOFs) are providing unprecedented opportunities for the development of novel functional MOFs for various biosensing applications. Exciting progress is achieved due to the combination of MOFs with various functional components, which introduces novel structures and new features to the MOFs-based biosensing applications, such as higher stability, higher sensitivity, higher flexibility, and higher specificity. This review aims to be a comprehensive summary of the most recent advances in the development of functional MOFs for various biosensing applications, placing special attention on important contributions in recent 3 years. In this review, the most recent developments in design and synthesis of functional MOFs for biosensing applications are summarized. MOFs-based biosensing applications are outlined according to the central roles of MOFs in biosensors, which include carriers of sensitive elements, enzyme-mimic elements, electrochemical signaling, optical signaling, and gas sensing. Finally, the current challenges and future development trends of functional MOFs for biosensing applications are proposed and discussed.

Refreshable Nanobiosensor Based on Organosilica Encapsulation of Biorecognition Elements

Implantable and wearable biosensors that enable monitoring of biophysical and biochemical parameters over long durations are highly attractive for early and presymptomatic diagnosis of pathological conditions and timely clinical intervention. Poor stability of antibodies used as biorecognition elements and the lack of effective methods to refresh the biosensors upon demand without severely compromising the functionality of the biosensor remain significant challenges in realizing protein biosensors for long-term monitoring. Here, we introduce a novel method involving organosilica encapsulation of antibodies for preserving their biorecognition capability under harsh conditions, typically encountered during the sensor refreshing process, and elevated temperature. Specifically, a simple aqueous rinsing step using sodium dodecyl sulfate (SDS) solution refreshes the biosensor by dissociating the antibody-antigen interactions. Encapsulation of the antibodies with an organosilica layer is shown to preserve the biorecognition capability of otherwise unstable antibodies during the SDS treatment, thus ultimately facilitating the refreshability of the biosensor over multiple cycles. Harnessing this method, we demonstrate the refreshability of plasmonic biosensors for anti-IgG (model bioanalyte) and neutrophil gelatinase-associated lipocalin (NGAL) (a biomarker for acute and chronic kidney injury). The novel encapsulation approach demonstrated can be easily extended to other transduction platforms to realize refreshable biosensors for monitoring of protein biomarkers over long durations.

Bimetallic cerium and ferric oxides nanoparticles embedded within mesoporous carbon matrix: Electrochemical immunosensor for sensitive detection of carbohydrate antigen 19-9

A label-free electrochemical immunosensor was successfully developed for sensitively detecting carbohydrate antigen 19-9 (CA19-9) as a cancer marker. To achieve this, a series of bimetallic cerium and ferric oxide nanoparticles embedded within the mesoporous carbon matrix (represented by CeO₂/FeO_x@mC) was obtained from the bimetallic CeFe-based metal organic framework (CeFe-MOF) by calcination at different high temperatures. The formed CeO₂ or FeO_x nanoparticles were uniformly distributed within the highly graphitized mesoporous carbon matrix at the calcination temperature of 500 °C (represented by CeO₂/FeO_x@mC₅₀₀). However, the obtained nanoparticles were aggregated into large size when calcined at the temperatures of 700 and 900 °C. The CA 19-9 antibody can be anchored to the CeO₂/FeO_x@mC network through chemical absorption between carboxylic groups of antibody and CeO₂ or FeO_x by ester-like bridging. The CeO₂/FeO_x@mC₅₀₀-based immunosensor displayed superior sensing performance to the pristine CeFe-MOF, CeO₂/FeO_x@mC₇₀₀- and CeO₂/FeO_x@mC₉₀₀-based ones. Electrochemical impedance spectroscopy results showed that the developed immunosensor exhibited an extremely low detection limit of 10 μU·mL^-1 (S/N = 3) within a wide range from 0.1 mU·mL^-1 to 10 U·mL^-1 toward CA 19-9. It also illustrated excellent specificity, good reproducibility and stability, and acceptable application analysis in the human serum solution which was diluted 100-fold with 0.01 M PBS solution (pH 7.4) and spiked with different amounts of CA19-9. Consequently, the proposed electrochemical immunosensor is capable enough of determining CA 19-9 in clinical diagnostics.

Metal-Organic-Framework-Based Enzymatic Microfluidic Biosensor via Surface Patterning and Biomineralization

Recently, the biomineralization of enzyme in metal-organic-framework (enzyme-MOF) composite have shown a great potential to increase enzymes stability without compromising their activity; hence, it is desirable for its applications in biosensing devices. Nonetheless, most of the enzyme-MOF research has been focusing on enzyme encapsulation in particle form, which limits its synthesis flexibility for practical applications because of its requirement for postsynthesis immobilization onto solid support. Therefore, to develop a diagnostic device out of the biomineralized enzyme, surface patterning and integration of microfluidic system offers many advantages. In this work, mussel-inspired polydopamine/polyethyleneimine (PDA/PEI) coating is employed to pattern enzyme-MOF in microfluidic channels and exploit the wettability gradient for "pumpless transportation" effect. As a proof of concept, we combine a cascade reaction of glucose oxidase (GOx) and horseradish peroxidase (HRP) enzymes to detect glucose into a patterned zeolitic imidazole framework-8 (ZIF-8) thin film on a flexible polymeric substrate. The results show that the ZIF-8/GOx&HRP in situ composites on PDA/PEI patterns have good acid and thermal stability compared with samples without ZIF-8. ZIF-8/GOx&HRP in situ shows high selectivity toward glucose, linear sensitivity of 0.00303 Abs/μM, and the limit of detection of 8 μM glucose concentration. An unexpected benefit of this approach is the ability of the ZIF-8 thin-film structure to provide a diffusion limiting effect for substrate influx, thus, producing high range of linear response range (8 μM to 5 mM of glucose). This work provides insights into the spatial location of the enzymes in MOF thin films and the potential of such patterning techniques for MOF-based biosensors using other types of biological elements such as antibodies and aptamers.