Selective and Sensocompatible Electrochemical Nitric Oxide Sensor with a Bilaminar Design

Electrochemical Detection of Gasotransmitters: Status and Roadmap

Gasotransmitters, including nitric oxide (NO), carbon monoxide (CO), and hydrogen sulfide (H2S), are a class of gaseous, endogenous signaling molecules that interact with one another in the regulation of critical cardiovascular, immune, and neurological processes. The development of analytical sensing mechanisms for gasotransmitters, especially multianalyte mechanisms, holds vast importance and constitutes a growing area of study. This review provides an overview of electrochemical sensing mechanisms with an emphasis on opportunities in multianalyte sensing. Electrochemical methods demonstrate good sensitivity, adequate selectivity, and the most well-developed potential for the multianalyte detection of gasotransmitters. Future research will likely address challenges with sensor stability and biocompatibility (i.e., sensor lifetime and cytotoxicity), sensor miniaturization, and multianalyte detection in biological settings.

Graphene nanocomposites for real-time electrochemical sensing of nitric oxide in biological systems

Nitric oxide (NO) signaling plays many pivotal roles impacting almost every organ function in mammalian physiology, most notably in cardiovascular homeostasis, inflammation, and neurological regulation. Consequently, the ability to make real-time and continuous measurements of NO is a prerequisite research tool to understand fundamental biology in health and disease. Despite considerable success in the electrochemical sensing of NO, challenges remain to optimize rapid and highly sensitive detection, without interference from other species, in both cultured cells and in vivo. Achieving these goals depends on the choice of electrode material and the electrode surface modification, with graphene nanostructures recently reported to enhance the electrocatalytic detection of NO. Due to its single-atom thickness, high specific surface area, and highest electron mobility, graphene holds promise for electrochemical sensing of NO with unprecedented sensitivity and specificity even at sub-nanomolar concentrations. The non-covalent functionalization of graphene through supermolecular interactions, including π-π stacking and electrostatic interaction, facilitates the successful immobilization of other high electrolytic materials and heme biomolecules on graphene while maintaining the structural integrity and morphology of graphene sheets. Such nanocomposites have been optimized for the highly sensitive and specific detection of NO under physiologically relevant conditions. In this review, we examine the building blocks of these graphene-based electrochemical sensors, including the conjugation of different electrolytic materials and biomolecules on graphene, and sensing mechanisms, by reflecting on the recent developments in materials and engineering for real-time detection of NO in biological systems.

Rational Design of Cu-Doped Tetrahedron of Spinel Oxide for High-Performance Nitric Oxide Electrochemical Sensor

The real-time detection of nitric oxide (NO) in living cells is essential to reveal its physiological processes. However, the popular electrochemical detection strategy is limited to the utilization of noble metals. The development of new detection candidates without noble metal species still maintaining excellent catalytic performance has become a big challenge. Herein, we propose a spinel oxide doped with heteroatom-Cu-doped Co₃O₄ (Cu-Co₃O₄) for the sensitive and selective detection of NO release from the living cells. The material is strategically designed with Cu occupying the tetrahedral (T_d) center of Co₃O₄ through the formation of a Cu-O bond. The introduced Cu regulates the local coordination environment and optimizes the electronic structure of Co₃O₄, hybridizing with the N 2p orbital to enhance charge transfer. The Cu_Td site can well inhibit the current response to nitrite (NO₂^-), resulting in a high improvement in the electrochemical oxidation of NO. The selectivity of Cu-Co₃O₄ can be markedly improved by the pore size of the molecular sieve and the negative charge on the surface. The rapid transmission of electrons is due to the fact that Cu-Co₃O₄ can be uniformly and densely in situ grown on Ti foil. The rationally designed Cu-Co₃O₄ sensor displays excellent catalytic activity toward NO oxidation with a low limit of detection of 2.0 nM (S/N = 3) and high sensitivity of 1.9 μA nM^-1 cm^-2 in cell culture medium. The Cu-Co₃O₄ sensor also shows good biocompatibility to monitor the real-time NO release from living cells (human umbilical vein endothelial cells: HUVECs; macrophage: RAW 264.7 cells). It was found that a remarkable response to NO was obtained in different living cells when stimulated by l-arginine (l-Arg). Moreover, the developed biosensor could be used for real-time monitoring of NO released from macrophages polarized to a M1/M2 phenotype. This cheap and convenient doping strategy shows universality and can be used for sensor design of other Cu-doped transition metal materials. The Cu-Co₃O₄ sensor presents an excellent example through the design of proper materials to implement unique sensing requirements and sheds light on the promising strategy for electrochemical sensor fabrication.

Planar carbon electrodes for real-time quantification of hydrogen sulfide release from cells

A planar electrode system was developed to permit the real-time, selective detection of hydrogen sulfide (H₂S) from stimulated cells. Planar carbon electrodes were produced via stencil printing carbon ink through a laser cut vinyl mask. Electrodes were preconditioned using a constant potential amperometry methodology to prevent sensor drift resulting from elemental sulfur adsorption. Modification with a bilaminar coating (electropolymerized ortho-phenylenediamine and a fluorinated xerogel) facilitated high selectivity to H₂S. To demonstrate the biological application of this planar sensor system, H₂S released from 17β-estradiol-stimulated human umbilical vein endothelial cells (HUVECs) was quantified in situ in real-time. Stimulated HUVECs released sustained H₂S levels for hours before returning to baseline. Cellular viability assays demonstrated negligible cell cytotoxicity at the electrochemical potentials required for analysis.

Real-Time In Vivo Sensing of Nitric Oxide Using Photonic Microring Resonators

Real-time in vivo detection of biomarkers, particularly nitric oxide (NO), is of utmost importance for critical healthcare monitoring, therapeutic dosing, and fundamental understanding of NO's role in regulating many physiological processes. However, detection of NO in a biological medium is challenging due to its short lifetime and low concentration. Here, we demonstrate for the first time that photonic microring resonators (MRRs) can provide real-time, direct, and in vivo detection of NO in a mouse wound model. The MRR encodes the NO concentration information into its transfer function in the form of a resonance wavelength shift. We show that these functionalized MRRs, fabricated using complementary metal oxide semiconductor (CMOS) compatible processes, can achieve sensitive detection of NO (sub-μM) with excellent specificity and no apparent performance degradation for more than 24 h of operation in biological medium. With alternative functionalizations, this compact lab-on-chip optical sensing platform could support real-time in vivo detection of myriad of biochemical species.

Direct acupuncture of nitric oxide by an electrochemical microsensor with high time-space resolution

Measurement of signal molecule is critically important for understanding living systems. Nitric oxide (NO) is a key redox signal molecule that shows diverse roles in virtually all life forms. However, probing into NO's activities is challenging as NO has restricted lifetime (<10 s) and limited diffusion distance (usually <200 μm). So, for the direct acupuncture of NO within the time-space resolution, an electrochemical microsensor has been designed and fabricated in this work. Fabrication of the microsensor is achieved by (1) selective assembly of an electrocatalytic transducer, (2) attaching the transducer on carbon fiber electrode, and (3) covered it with a screen layer to reduce signal interference. The fabricated microsensor exhibits high sensitivity (LOD, 13.5 pM), wide detection range (100 pM-5 μM), and good selectivity. Moreover, studies have revealed that the availability of the sensor for efficient detection of NO is due to the formation of a specific DNA/porphyrin hybrid structure that has synergetic effects on NO electrocatalysis. Therefore, NO release by cells and tissues can be directly and precisely traced, in which we have obtained the release pattern of NO by different cancer cell lines, and have known its dynamics in tumor microenvironment. The fabricated electrocatalytic microsensor may provide a unique and useful tool for the direct assay of NO with high time-space resolution, which promisingly gives a technical solution for the bioassay of NO in living systems.

Silica Xerogel Doped with Iron(III) as Sensor Material for Salicylhydroxamic Acid Determination in Urine

Salicylhydroxamic acid (SHA) is used as antimicrobic medicine and its concentration has to be monitored in urine. For the first time, silica xerogels doped with iron(III) have been proposed as sensor materials for SHA determination in biological samples. Three xerogels with iron(III) content in the range of 0.04–1.74% wt have been synthesized. BET surface area of these xerogels has varied in the range of 696–529 m²/g and total pore volume has varied in the range of 0.92–0.23 cm³/g. Complex formation between immobilized iron(III) and salicylhydroxamic acid has been investigated with solid phase spectrophotometry and IR spectroscopy. Orange-brown iron(III)-SHA complex with 1:1 stoichiometry is formed at pH 1–4 with half-reaction time of 17 min. Silica xerogel doped with 0.33% wt iron(III)) has been used as sensor material for SHA solid phase spectrophotometric determination (LOD 1.4 mg/L (n = 3), analytical range 4–230 mg/L). Proposed sensor material has been applied for SHA determination in biological samples of synthetic and human urine. The proposed procedure is characterized by a good level of accuracy (recovery values 97–120%) and precision (RSD values 4–9%) and can be recommended for pharmacokinetic–pharmacodynamic studies of hydroxamic acid-based medications.

Quantitative determination of nitric oxide from tissue samples using liquid chromatography-Mass spectrometry

•

We report a method to measure NO by reacting it with carboxy-PTIO to form carboxy-PTI.

•

The carboxy-PTI is quantified by liquid chromatography – mass spectrometry (LCMS).

•

This method can quantitate NO concentrations ranging from 5 nM to 1 μM.

Ever since it was found to mediate the endothelium-dependent dilation of blood vessels, nitric oxide (NO) has generated enormous research interest throughout the biological sciences. Over thirty years of research has identified NO as a ubiquitous and versatile regulatory factor utilized by both vertebrates and invertebrates. The short lifetime and low concentration of NO make quantitation difficult. Here we report a method for measuring NO using the selective reaction with 2-​(4-​carboxyphenyl)-​4,​5-​dihydro-​4,​4,​5,​5-​tetramethyl-1H-​imidazolyl-​1-​oxy-​3-​oxide (carboxy-PTIO) to form carboxy-PTI. We used tandem mass spectrometry to verify the validity of this reaction, and liquid chromatography – mass spectrometry to quantitate the amount of carboxy-PTI formed. Using diethylamine nonoate as a NO donor we demonstrate this method can quantitate NO concentrations with a detection limit of 5 nM. We successfully determined the amount of NO generated endogenously by frog heart/aorta when stimulated by carbachol, a non-selective acetylcholine receptor agonist. Based on these results, we suggest that this technique can be useful for the quantitative determination of NO in biological samples.•

We report a method to measure NO by reacting it with carboxy-PTIO to form carboxy-PTI.

•

The carboxy-PTI is quantified by liquid chromatography mass spectrometry (LCMS).

•

This method can quantitate NO concentrations ranging from 5 nM to 1 µM

Nanosensor Chemical Cytometry for Characterizing the Efflux Heterogeneity of Nitric Oxide from Macrophages

Macrophages are a critical part of the human immune response, and their collective heterogeneity is implicated in disease progression and prevention. A nondestructive, label-free tool does not currently exist for profiling the dynamic, antigenic responses of single macrophages in a collection to correlate with specific molecular expression and correlated biophysical properties at the cellular level, despite the potential for diagnosis and therapeutics. Herein, we develop a nanosensor chemical cytometry (NCC) that can profile the heterogeneity of inducible nitric oxide synthase (iNOS) responses from macrophage populations. By integrating a near-infrared (nIR) fluorescent nanosensor array and collagen layer with microfluidics, the cellular lensing effect of the macrophage was utilized to characterize both nitric oxide (NO) efflux and refractive index (RI) changes at a single-cell level. Using a parallel, multichannel approach, distinct iNOS heterogeneities of macrophages can be monitored at an attomolar (10^-18 mol) sensitivity in a nondestructive and real-time manner with a throughput of exceeding the 200 cells/frame. We demonstrate that estimated mean NO efflux rates of macrophage populations are elevated from 342 (σ = 199) to 464 (σ = 206) attomol/cell·hr with a 3% larger increase in the heterogeneity, and estimated RI of macrophage decrease from 1.366 (σ = 0.015) to 1.359 (σ = 0.009) with trimodal subpopulations under lipopolysaccharide (LPS) activation. These measured values are also in good agreement with Griess assay results and previously reported measurements. This work provides an efficient strategy for single-cell analysis of macrophage populations for cellular manufacturing and biopharmaceutical engineering.

Facile Green Approach for Developing Electrochemically Reduced Graphene Oxide-Embedded Platinum Nanoparticles for Ultrasensitive Detection of Nitric Oxide

Nitric oxide (NO) plays a crucial and important role in cellular physiology and also acts as a signaling molecule for cancer in humans. However, conventional detection methods have their own limitations in the detection of NO at low concentrations because of its high reactivity and low lifetime. Herein, we report a strategy to fabricate Pt nanoparticle-decorated electrochemically reduced graphene oxide (erGO)-modified glassy carbon electrode (GCE) with efficiency to detect NO at a low concentration. For this study, Pt@erGO/GCE was fabricated by employing two different sequential methods [first GO reduction followed by Pt electrodeposition (SQ-I) and Pt electrodeposition followed by GO reduction (SQ-II)]. It was interesting to note that the electrocatalytic current response for SQ-I (184 μA) was ∼15 and ∼3 folds higher than those of the bare GCE (11.7 μA) and SQ-II (61.5 μA). The higher current response was mainly attributed to a higher diffusion coefficient and electrochemically active surface area. The proposed SQ-I electrode exhibited a considerably low LOD of 52 nM (S/N = 3) in a linear range of 0.25-40 μM with a short response time (0.7 s). In addition, the practical analytical applicability of the proposed sensor was also verified.

Mode of nitric oxide delivery affects antibacterial action

Nitric oxide (NO) is a broad-spectrum antibacterial agent, making it an attractive alternative to traditional antibiotics for treating infections. To date, a direct comparison of the antibacterial activity of gaseous NO (gNO) versus water-soluble NO-releasing biopolymers has not been reported. In this study, the bactericidal action of NO-releasing chitosan oligosaccharides was compared to gNO treatment against cystic fibrosis-relevant Gram-positive and Gram-negative bacteria. A NO exposure chamber was constructed to enable the dosing of bacteria with gNO at concentrations up to 800 ppm under both aerobic and anaerobic conditions. Bacteria viability, solution properties (i.e., pH, NO concentration), and toxicity to mammalian cells were monitored to ensure a thorough understanding of bactericidal action and reproducibility for each delivery method. The NO-releasing chitosan oligosaccharides required significantly lower NO doses relative to gNO therapy to elicit antibacterial action against Pseudomonas aeruginosa and Staphylococcus aureus under both aerobic and anaerobic conditions. Reduced NO doses required for bacteria eradication using water-soluble NO-releasing chitosan were attributed to the release of NO in solution, removing the need to transfer from gas to liquid phase and the associated long diffusion distances of gNO treatment.