Advanced Colorimetric Paper Sensors Using Color Focusing Effect Based on Asymmetric Flow of Fluid

Green manufacturing of a hypoxanthine enzyme sensor for fish freshness based on modified nitrocellulose surface with chito-oligosaccharide

Hypoxanthine (Hx), produced by adenosine triphosphate (ATP) metabolism, is a valuable indicator that determines the quality and degradation status of meat products and is also an important biochemical marker to certain diseases such as gout. The rapid emergence of paper-based enzyme biosensors has already revolutionized its on-site determination. But it is still limited by the complex patterning and fabrication, unstable enzyme and uneven coloration. This work aims to develop an eco-friendly method to construct engineered paper microfluidic, which seeks to produce reaction and non-reaction zones without any patterning procedure. Chito-oligosaccharide (COS), derived from shrimp shells, was used to modify nitrocellulose membranes and immobilize xanthine oxidase (XOD) and chromogenic agent of nitro blue tetrazolium chloride (NBT). After modification, micro fluids could converge into the modification area and Hx could be detected by XOD-catalyzed conversion. Due to the positively charged cationic basic properties of COS, the enzyme storage stability and the color homogeneity could be greatly strengthened through the electrostatic attraction between COS and XOD and formazan product. The detection limit (LOD) is 2.30 μM; the linear range is 0.05-0.35 mM; the complete test time can be as short as 5 min. The COS-based biosensor shows high specificity and can be used directly for Hx in complex samples such as fish and shrimp samples, and different broths. This biosensor is eco-friendly, nontechnical, economical and therefore a compelling platform for on-site or home-based detection of food freshness.

NFC-enabled photothermal-based microfluidic paper analytical device for glucose detection

This study introduces the development of a photothermal-based microfluidic paper analytical device (PT-µPAD) integrated with near-field communication (NFC) technology and smartphone readout for enzyme-free glucose quantification in human samples. With the properties of gold nanoparticles (AuNPs) both as a nanozyme and as a photothermal substrate, there is no need for costly reagents like enzymes or a readout instrumentation for the selective and sensitive detection of glucose. In PT-µPADs, AuNPs are etched by hydrogen peroxide (H2O2) generated from glucose catalysis. Photothermal detection from the plasmonic heating of these AuNPs when illuminated by a 533nm LED light source is achieved by inserting the PT-µPAD sensor into a portable NFC platform suitable for smartphone readout. Temperature variation is directly proportional to the glucose concentration. After optimization, we acquired a linear range between 5.0 and 20.0 µmol L-1 (R2 = 0.9967) and a limit of detection (LOD) of 25.0 nmol L-1 for glucose. Additionally, while our sensor does not utilize any enzyme, it is remarkably selective to glucose with no effects from interferences. Recovery studies in various human control samples indicated a range of 99.73-102.66% with the highest RSD of 3.53%, making it highly accurate and precise. Moreover, our method is more sensitive than other methods relying on conventional µPADs for glucose sensing. By integrating the potential benefits of microfluidics, nanomaterials as nanozymes, and NFC technology for wireless readout, our sensor demonstrates great promise as an accessible, affordable, and shelf-stable device for glucose quantification. Moreover, this concept can be extended to detect other molecules of interest as a point-of-care (POC) diagnostics device.

Magnetoplasmonic photonic arrays for rapid and selective colorimetric detection of chloride ions in water

The rapid and efficient detection of chloride (Cl-) ions is crucial in a variety of fields, making the development of advanced sensing methods such as colorimetric sensors an imperative advancement in analytical chemistry. Herein, a novel, selective, and straightforward paper-based colorimetric sensing platform has been developed utilizing an amorphous photonic array (APA) of magnetoplasmonic Ag@Fe3O4 nanoparticles (MagPlas NPs) for the detection of Cl- in water. Taking advantage of the highly responsive APA, the key principle of this sensing method is based on the chemical reaction between Ag+ and Cl-, which results in the precipitation of high-refractive index (RI) AgCl. This assay, distinct from typical plasmonic sensors that rely heavily on nanoparticle aggregation/anti-aggregation, is premised on the precipitation reaction of Ag+ and Cl-. In the presence of Cl-, a rapid, distinctive color alteration from royal purple to a dark sky blue is visually observable within a short time of a few minutes, eliminating the necessity for any surface modification procedures. Comprehensive assessments substantiated that these sensors display commendable sensitivity, selectivity, and stability, thereby establishing their effective applicability for Cl- analysis in various technological fields.

Scope of Onsite, Portable Prevention Diagnostic Strategies for Alternaria Infections in Medicinal Plants

Medicinal plants are constantly challenged by different biotic inconveniences, which not only cause yield and economic losses but also affect the quality of products derived from them. Among them, Alternaria pathogens are one of the harmful fungal pathogens in medicinal plants across the globe. Therefore, a fast and accurate detection method in the early stage is needed to avoid significant economic losses. Although traditional methods are available to detect Alternaria, they are more time-consuming and costly and need good expertise. Nevertheless, numerous biochemical- and molecular-based techniques are available for the detection of plant diseases, but their efficacy is constrained by differences in their accuracy, specificity, sensitivity, dependability, and speed in addition to being unsuitable for direct on-field studies. Considering the effect of Alternaria on medicinal plants, the development of novel and early detection measures is required to detect causal Alternaria species accurately, sensitively, and rapidly that can be further applied in fields to speed up the advancement process in detection strategies. In this regard, nanotechnology can be employed to develop portable biosensors suitable for early and correct pathogenic disease detection on the field. It also provides an efficient future scope to convert innovative nanoparticle-derived fabricated biomolecules and biosensor approaches in the diagnostics of disease-causing pathogens in important medicinal plants. In this review, we summarize the traditional methods, including immunological and molecular methods, utilized in plant-disease diagnostics. We also brief advanced automobile and efficient sensing technologies for diagnostics. Here we are proposing an idea with a focus on the development of electrochemical and/or colorimetric properties-based nano-biosensors that could be useful in the early detection of Alternaria and other plant pathogens in important medicinal plants. In addition, we discuss challenges faced during the fabrication of biosensors and new capabilities of the technology that provide information regarding disease management strategies.

Nanomaterials integrated with microfluidic paper-based analytical devices for enzyme-free glucose quantification

In this study, nanomaterials capable of enzyme-free glucose quantification and colorimetric readout are integrated into a microfluidic paper-based analytical devices (μPADs). Gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs) were utilized as a peroxidase-like nanozyme and a colorimetric probe to achieve glucose monitoring. In this developed device, glucose is oxidized by AuNPs to generate hydrogen peroxide (H₂O₂), which flows in the paper microchannels toward detection zones. H₂O₂ then etches the immobilized AgNPs to induce a color change. The intensity of color change is easily monitored using a smartphone application. Following method optimization, we obtained a linear range from 0.50 to 10.0 mmol L^-1 (R² = 0.9921) and a detection limit (LOD) of 340.0 μmol L^-1. This falls in the clinically relevant range for glucose monitoring and diabetes diagnosis in humans. In addition, the total analysis time is just 20 min, which is significantly less than the same experiment performed in the solution phase. Also, our method is markedly selective; other substrates do not interfere. The recovery test in human control samples was in the range of 98.47-102.34% and the highest relative standard deviation (RSD) was 3.58%. The enzyme-free approach for glucose sensing is highly desirable for diabetes diagnosis as it replaces the more expensive enzyme with cheaper nanomaterials. Furthermore, since nanomaterials are more environmentally stable compared to enzymes, it has the potential for widespread deployment as point-of-care diagnostics (POC) in resource-limited settings.

Trends in Paper-Based Sensing Devices for Clinical and Environmental Monitoring

Environmental toxic pollutants and pathogens that enter the ecosystem are major global issues. Detection of these toxic chemicals/pollutants and the diagnosis of a disease is a first step in efficiently controlling their contamination and spread, respectively. Various analytical techniques are available to detect and determine toxic chemicals/pathogens, including liquid chromatography, HPLC, mass spectroscopy, and enzyme-linked immunosorbent assays. However, these sensing strategies have some drawbacks such as tedious sample pretreatment and preparation, the requirement for skilled technicians, and dependence on large laboratory-based instruments. Alternatively, biosensors, especially paper-based sensors, could be used extensively and are a cost-effective alternative to conventional laboratory testing. They can improve accessibility to testing to identify chemicals and pollutants, especially in developing countries. Due to its low cost, abundance, easy disposal (by incineration, for example) and biocompatible nature, paper is considered a versatile material for the development of environmentally friendly electrochemical/optical (bio) sensor devices. This review presents an overview of sensing platforms constructed from paper, pointing out the main merits and demerits of paper-based sensing systems, their fabrication techniques, and the different optical/electrochemical detection techniques that they exploit.

A regression-based machine learning approach for pH and glucose detection with redox-sensitive colorimetric paper sensors

Colorimetric paper sensors are used in various fields due to their convenience and intuitive manner. However, these sensors present low accuracy in practical use because it is difficult to distinguish color changes for a minute amount of analyte with the naked eye. Herein, we demonstrate that a machine learning (ML)-based paper sensor platform accurately determines the color changes. We fabricated a colorimetric paper sensor by adsorbing polyaniline nanoparticles (PAni-NPs), whose color changes from blue to green when the ambient pH decreases. Adding glucose oxidase (GOx) to the paper sensor enables colorimetric glucose detection. Target analytes (10 μL) were aliquoted onto the paper sensors, and their images were taken with a smartphone under the same conditions in a darkroom. The red-green-blue (RGB) data from the images were extracted and used to train and test three regression models: support vector regression (SVR), decision tree regression (DTR), and random forest regression (RFR). Of the three regression models, RFR performed the best at estimating pH levels (R² = 0.957) ranging from pH 2 to 10 and glucose concentrations (R² = 0.922) ranging from 0 to 10 mg mL^-1.

An up-conversion test paper based on "switch-off" of fluorescence is constructed to sensitively and selectively detect cancer-causing dye Sudan III in lipstick

Cancer-causing dye Sudan III is banned adding to cosmetics, so a method for detecting trace Sudan III in cosmetics is established. A single dispersed up-conversion molecularly imprinted fluorescent nanoprobe is constructed and coated on the filter paper. The mechanism for detecting Sudan III by this composite fluorescent nanoprobes-paper is systematically analyzed. The fluorescent response (max emission peak is at 541 nm) is linearly related to 10-1000 nM Sudan III, and Sudan III can be selectively recognized (imprinting factor increased to 4.1). The limit of detection and quantitation are further reduced to 2.89 nM and 9.63 nM, respectively. The recoveries of Sudan III in lipstick samples are between 93.18 and 108.3%, and relative standard deviation is less than or equal to 4.6%. Trace Sudan III in cosmetics are detected accurately and sensitively by this method due to up-conversion nanoparticles with little interference of background fluorescence and molecularly imprinted polymers with selective enrichment.

Simple and Sensitive Detection of Bacterial Hydrogen Sulfide Production Using a Paper-Based Colorimetric Assay

Hydrogen sulfide (H₂S) is known to participate in bacteria-induced inflammatory response in periodontal diseases. Therefore, it is necessary to quantify H₂S produced by oral bacteria for diagnosis and treatment of oral diseases including halitosis and periodontal disease. In this study, we introduce a paper-based colorimetric assay for detecting bacterial H₂S utilizing silver/Nafion/polyvinylpyrrolidone membrane and a 96-well microplate. This H₂S-sensing paper showed a good sensitivity (8.27 blue channel intensity/μM H₂S, R² = 0.9996), which was higher than that of lead acetate paper (6.05 blue channel intensity/μM H₂S, R² = 0.9959). We analyzed the difference in H₂S concentration released from four kinds of oral bacteria (Eikenella corrodens, Streptococcus sobrinus, Streptococcus mutans, and Lactobacillus casei). Finally, the H₂S level in Eikenella corrodens while varying the concentration of cysteine and treatment time was quantified. This paper-based colorimetric assay can be utilized as a simple and effective tool for in vitro screening of H₂S-producing ability of many bacteria as well as salivary H₂S analysis.

Rapid and accurate nanoelectrokinetic diagnosis of drug-resistant bacteria

Increased antimicrobial resistance presents a major threat to public health, and it is a global health problem due to the rapid globalization and transmission of infectious diseases. However, fast and precise diagnosis tool is lacking, and inappropriate antibiotic prescription leads to the unforeseen production of drug-resistant bacteria. Here, we report a Rapid and Accurate Nanoelectrokinetic Diagnostic System (RANDx) for detecting drug-resistant bacteria, which cause a common infectious disease called Urinary Tract Infection (UTI), within 7 min. We develop nanoelectrokinetic paper-based analytic device (NEK-PAD) as a sample prep module of RANDx and obtain >100-fold post-wetting preconcentration by balancing between ion concentration polarization (ICP) and radial imbibition for a constant flow rate. Simultaneously with preconcentration, our cathodic nanochannel design enables NEK-PAD to extract drug-resistant enzymes without denaturation and accelerate enzyme-linked reactions under electrical spontaneous heating at approximately 37 °C. Finally, using a cell phone camera, we detect label-free drug-resistant bacteria as low as 10⁴ cfu/mL, which is higher than clinically required threshold (>10⁵ cfu/mL) by enhancing 1000 times of the limit of detection (LOD) of colorimetric nitrocefin assay. We believe that the RANDx will be an innovative precision medicine tool for UTI and other infectious diseases in limited remote settings.

Reagent Filming for Universal Point-of-Care Diagnostics

Simplifying assays while maintaining the robustness of reagents is a challenge in diagnostics. This problem is exacerbated when translating quality diagnostic assays to developing countries that lack resources and infrastructure such as trained health workers, high-end equipment, and cold-chain systems. To solve this problem, in this study, a simple solution that films assay reagents to simplify the operation of diagnostic assays and preserve the stability of diagnostic reagents without using cold chains is presented. A polyvinyl-alcohol-based water-soluble film is used to encapsulate premeasured and premixed reagents. The reagent film, produced through a simple and scalable cast-drying process, provides a glassy inner matrix with abundant hydroxyl groups that can stabilize various reagents (ranging from chemicals to biological materials) by restricting molecular mobility and generating hydrogen bonds. The reagent film is applied to an enzymatic glucose assay, a high-sensitivity immunoassay for cardiac troponin, and a molecular assay for viral RNA detection, to test its practicability and universal applicability. The film-based assays result in excellent analytical/diagnostic performance and stable long-term reagent storage at elevated temperatures (at 25 or 37 °C, for six months), demonstrating clinical readiness. This technology advances the development and distribution of affordable high-quality diagnostics to resource-limited regions.

Paper-Based Multiplexed Colorimetric Device for the Simultaneous Detection of Salivary Biomarkers

In this study, we describe a monolithic and fully integrated paper-based device for the simultaneous detection of three prognostic biomarkers in saliva. The pattern of the proposed multiplexed device is designed with a central sample deposition zone and three identical arms, each containing a pre-treatment and test zone. Its one-step fabrication is realized by CO₂ laser cutting, providing remarkable parallelization and rapidity (ca. 5 s/device). The colorimetric detection is based on the sensitive and selective target-induced reshaping of plasmonic multibranched gold nanoparticles, which exhibit a clear spectral shift (and blue-to-pink color change) in case of non-physiological concentrations of the three salivary biomarkers. A rapid and multiplexed naked-eye or smartphone-based readout of the colorimetric response is achieved within 10 min. A prototype kit for POCT testing is also reported, providing robustness and easy handling of the device.

Detection of low glucose levels in sweat with colorimetric wearable biosensors

Low glucose levels during exercise may lead to hypoglycemia, which can have grave consequences in diabetic athletes. Mobile colorimetric wearable biosensors that measure glucose levels in sweat are ideal for self-monitoring as they can utilize the camera in smartphones for signal reading. However, colorimetric biosensors proposed thus far have higher limit of detection (LOD) than electrochemical devices, which makes them unsuitable for detecting hypoglycemia. In this manuscript we describe colorimetric wearable biosensors that detect glucose in sweat with an LOD of 0.01 mM and a dynamic range up to 0.15 mM. The devices are made of filter paper and incorporate a sweat volume sensor and a color chart for signal correction. The biosensors do not suffer from interferences originated by delayed sample readings, or differences in bending angle and sample pH. When applied to volunteers performing an exercise routine, sweat glucose levels corrected with sweat volume measurements correlated well with blood glucose measurements performed with a commercial device. The devices are lightweight and easily disposable. These features, along with the smartphone-based colorimetric readout, makes them promising as "over-the-counter" tests for measuring glucose levels non-invasively during exercise.

Selective colorimetric urine glucose detection by paper sensor functionalized with polyaniline nanoparticles and cell membrane

For the diabetes diagnosis, noninvasive methods are preferred to invasive methods; urine glucose measurement is an example of a noninvasive method. However, conventional noninvasive methods for urine glucose measurement are not intuitive. Furthermore, such methods exhibit low selectivity because they can detect interfering molecules in addition to glucose. Herein, we fabricate a noninvasive, intuitive, and highly selective paper sensor consisting of polyaniline nanoparticles (PAni-NPs) and red blood cell membranes (RBCMs). The PAni-NPs (adsorbed on the paper) are highly sensitive to hydrogen ions and change color from emeraldine blue to emeraldine green within a few seconds. The RBCM (coated on the PAni-NP-adsorbed paper) having the glucose transporter-1 protein plays the role of a smart filter that transports glucose but rejects other interfering molecules. In particular, the selectivity of the RBCM-coated PAni-NP-based paper sensor was approximately improved ∼85%, compared to the uncoated paper sensors. The paper sensor could detect urine glucose over the range of 0-10 mg/mL (0-56 mM), with a limit of detection of 0.54 mM. The proposed paper sensor will facilitate the development of a highly selective and colorimetric urine glucose monitoring system.

Wearable Analytical Platform with Enzyme-Modulated Dynamic Range for the Simultaneous Colorimetric Detection of Sweat Volume and Sweat Biomarkers

In this manuscript, we introduce a wearable analytical platform that simultaneously measures the concentration of sweat lactate and sample volume. It contains two sensors entirely made of filter paper that can be easily affixed on the skin with medical-grade tape. The lactate biosensor features a unique signal modulation mechanism that enables fine-tuning the dynamic range. It consists of adding a competitive enzyme inhibitor in different reservoirs. Thanks to this, it is possible to choose between a very low limit of detection (0.06 mM) and a linear response in the physiological concentration range (10-30 mM). The sweat volume sensor was obtained by adding a reservoir containing gold nanoparticles. As the wearer sweats, the nanoparticles are carried through a paper channel. This is used to gauge the volume of sample by measuring the distance traveled by the nanoprobes. Using fine-tuned lactate biosensors and combining them with the volume sensors allowed us to quantify variations in the levels of sweat lactate independently of the wearer's sweat rate during an exercise routine. The platform design can be customized to meet the end user's needs, which makes it ideal for developing a wide array of disposable wearable biosensors.

Flow-based System: A Highly Efficient Tool Speeds Up Data Production and Improves Analytical Performance

In this review, we cite references from the period between 2015 and 2020 related to the use of a flow-based system as a tool to obtain a modern analytical system for speeding up data production and improving performance. Based on a great deal of concepts for automatic systems, there are several research groups introduced in the development of flow-based systems to increase sample throughput while retaining the reproducibility and repeatability as well as to propose new platforms of flow-based systems, such as microfluidic chip and paper-based devices. Additionally, to apply a developed system for on-site analysis is one of the key features for development. We believe that this review will be very interested and useful for readers because of its impact on developing novel analytical systems. The content of the review is categorized following their applications including quality control and food safety, clinical diagnostics, environmental monitoring and miscellaneous.

Fluorometric determination of tyramine by molecularly imprinted upconversion fluorescence test strip

A fluorometric method based on molecularly imprinted upconversion fluorescence test strip was developed for the determination of tyramine. It exploited the green fluorescence of upconversion nanoparticles (UCNPs) and the specific recognition property of molecularly imprinted polymers (MIPs). UCNPs were attached to filter paper with glue, and MIPs were prepared via in situ polymerization on the surface of UCNPs by using tyramine as template, methacrylic acid as functional monomer, and ethylene glycol dimethacrylate as cross-linker. The green fluorescence of the test strip, with excitation/emission wavelength 980/550 nm, was enhanced by tyramine. The test strip was suitable for the determination of tyramine in the linear range 1.0-100.0 mg L^-1, and a relatively low limit of detection (0.2 mg L^-1) was achieved. The test strip also worked well for the quantitation of tyramine in spiked red wine and mature vinegar. Recoveries are ranged from 84.9 to 99.9%. The relative standard deviations are below 5.6%. Graphical abstract.

Paper-based 1,5-anhydroglucitol quantification using enzyme-based glucose elimination

The monosaccharide 1,5-anhydroglucitol (1,5-AG) is a known indicator of glucose levels. Conventional 1,5-AG quantification methods with enzyme-based sensors using pyranose oxidase (PROD) require elimination of interference from the sample (a laborious and time-consuming process), as PROD cannot distinguish 1,5-AG from other sugars. We developed a one-step paper-based sensor for detecting 1,5-AG using glucose oxidase, catalase, and mutarotase that eliminates excess glucose, which interferes with 1,5-AG detection. This sensor consists of two compartments for the quantification of glucose and 1,5-AG and reflects the concentration of these targets after reaction with water or spiked human urine. The limit of detection of the sensor was 0.9 mg dL-1 for glucose and 3.2 μg mL-1 for 1,5-AG.