Platinum Recovery from Industrial Process Solutions by Electrodeposition-Redox Replacement

Modulating the pore and electronic structure for targeted recovery of platinum: Accelerated kinetic and reinforced coordination

Adsorption for recovery of low-concentration platinum (Pt) from the complex composition of acidic digestates was challenging because of slow kinetic and poor affinity. It was expected to be overcome by the improvement of pore size distribution and adsorption site activity. Herein, a series of Prussian blue etchings (PBE) with porosity-rich and activity-high cyano (CN) was synthesized to recover low-concentration Pt. The N2 isotherm results showed that the pore structure evolved from mesoporous to microporous. The Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations results revealed that the modulation of electronic structure converted FeII to FeIII in [FeII(CN)6]4-. The coexistence of micro- and meso-pore structures provided channels to accelerate adsorption and ensured PtII enrichment. The regulation of Fe valence state activated CN, which reinforced the strength of coordination interaction between Pt and Fe-CN- at N-atom. The adsorption rate and maximum capacity of PBE1 were 4.4 and 2.5 times higher than those of PB, respectively, due to the dual efficacy of accelerated kinetic and reinforced coordination. This study systematically analyzes the pivotal role of pore and electronic structure modulation in adsorption kinetic and affinity, which provides a novel strategy for PtII targeted recovery.

A review on recent environmental electrochemistry approaches for the consolidation of a circular economy model

Availability of raw materials in the chemical industry is related to the selection of the chemical processes in which they are used as well as to the efficiency, cost, and eventual evolution to more competitive dynamics of transformation technologies. In general terms however, any chemically transforming technology starts with the extraction, purification, design, manufacture, use, and disposal of materials. It is important to create a new paradigm towards green chemistry, sustainability, and circular economy in the chemical sciences that help to better employ, reuse, and recycle the materials used in every aspect of modern life. Electrochemistry is a growing field of knowledge that can help with these issues to reduce solid waste and the impact of chemical processes on the environment. Several electrochemical studies in the last decades have benefited the recovery of important chemical compounds and elements through electrodeposition, electrowinning, electrocoagulation, electrodialysis, and other processes. The use of living organisms and microorganisms using an electrochemical perspective (known as bioelectrochemistry), is also calling attention to "mining", through plants and microorganisms, essential chemical elements. New process design or the optimization of the current technologies is a major necessity to enhance production and minimize the use of raw materials along with less generation of wastes and secondary by-products. In this context, this contribution aims to show an up-to-date scenario of both environmental electrochemical and bioelectrochemical processes for the extraction, use, recovery and recycling of materials in a circular economy model.

Emerging Electrochemical Processes to Decarbonize the Chemical Industry

Electrification is a potential approach to decarbonizing the chemical industry. Electrochemical processes, when they are powered by renewable electricity, have lower carbon footprints in comparison to conventional thermochemical routes. In this Perspective, we discuss the potential electrochemical routes for chemical production and provide our views on how electrochemical processes can be matured in academic research laboratories for future industrial applications. We first analyze the CO₂ emission in the manufacturing industry and conduct a survey of state of the art electrosynthesis methods in the three most emission-intensive areas: petrochemical production, nitrogen compound production, and metal smelting. Then, we identify the technical bottlenecks in electrifying chemical productions from both chemistry and engineering perspectives and propose potential strategies to tackle these issues. Finally, we provide our views on how electrochemical manufacturing can reduce carbon emissions in the chemical industry with the hope to inspire more research efforts in electrifying chemical manufacturing.

Selective electrochemical extraction of copper from multi-metal e-waste leaching solution and its enhanced recovery mechanism

Recycling activity for waste electrical and electronic equipment is always accompanied with leaching solution containing copper. Its selective extraction is of environmental and economic significance, and is beneficial for subsequent resource purification procedure. Compared with techniques such as chemical precipitation and solvent extraction, potentiostatic electrodeposition is outstanding with the advantage of high selectivity, electron as clean reagent, and minimal chemical usage. However, key factors affecting copper electrodeposition behavior as well as its kinetic process remain unclear, which blocks its further application. In this study, selective copper electrochemical extraction from multi-metal leaching solution of waste liquid crystal display panels is explored. Copper electrodeposition is analyzed from electrochemical and mass transport point of view, and the main results are summarized: (i) copper can be first electrodeposited due to its higher reduction potential compared with indium; (ii) applied potential and agitation are the most influential factors towards space-time yield and current efficiency; (iii) a semi-empirical kinetic model could quantitatively describe the influence of agitation and the time-current-concentration relationship. The model-predicted extraction rate agreed well with experimental data throughout electrodeposition; (iv) electrodeposition experiments show over 95% of copper can be selectively extracted as ultrafine copper powder (~150 nm) at 0.05 V (vs. SHE).

Is Green Chemistry a feasible tool for the implementation of a circular economy?

The main goal of this research is to evaluate the contributions of Green Chemistry as a potential tool to drive the transition to circularity. For this, we have carried out a bibliographic study, analyzing those documents, process, or experiences that dealt jointly with the Green Chemistry aspects related to circularity such circular economy, industrial ecology, and closed loop. Findings show that few authors have treated that disciplines together in the last 10 years. Based on an analysis of academic literature, common strategies (design, raw materials, life cycle assessment, processes, normative, new business, and collaboration), specific experiences (catalyst, biobased products or methods, recycling, and reusing), and difficulties to overcome (metrics, transdisciplinary research, unawareness, and competitiveness) have been identified. Finally, different kind of measures, as behind such joint metrics, informal open spaces, closer the industry, education, standards and label are proposed to facilitate the development of Green Chemistry, circular economy, industrial ecology, and closed loop with the ultimate goal of improving sustainable development.From the evidences found, we finally conclude that it is possible to use Green Chemistry and its principles as a tool to drive the transition to circularity, being the development of open spaces for exchange information between different actors from academia, governments and regulatory actors, business and industrial sectors, with the aim of promoting disruptive advances in sustainability.

Electrochemical recovery of tellurium from metallurgical industrial waste

Abstract

The current study outlines the electrochemical recovery of tellurium from a metallurgical plant waste fraction, namely Doré slag. In the precious metals plant, tellurium is enriched to the TROF (Tilting, Rotating Oxy Fuel) furnace slag and is therefore considered to be a lost resource—although the slag itself still contains a recoverable amount of tellurium. To recover Te, the slag is first leached in aqua regia, to produce multimetal pregnant leach solution (PLS) with 421 ppm of Te and dominating dissolved elements Na, Ba, Bi, Cu, As, B, Fe and Pb (in the range of 1.4–6.4 g dm−3), as well as trace elements at the ppb to ppm scale. The exposure of slag to chloride-rich solution enables the formation of cuprous chloride complex and consequently, a decrease in the reduction potential of elemental copper. This allows improved selectivity in electrochemical recovery of Te. The results suggest that electrowinning (EW) is a preferred Te recovery method at concentrations above 300 ppm, whereas at lower concentrations EDRR is favoured. The purity of recovered tellurium is investigated with SEM–EDS (scanning electron microscope–energy dispersion spectroscopy). Based on the study, a new, combined two-stage electrochemical recovery process of tellurium from Doré slag PLS is proposed: EW followed by EDRR.

Graphic abstract