Optimizing Oleaginous Yeast Cell Factories for Flavonoids and Hydroxylated Flavonoids Biosynthesis

Development of genetic markers in Yarrowia lipolytica

The oleaginous yeast Yarrowia lipolytica represents a potential microbial cell factory for the recombinant production of various valuable products. Currently, the commonly used selection markers for transformation in Y. lipolytica are limited, and successive genetic manipulations are often restricted by the number of available selection markers. In our study, we developed a dominant marker, dsdA, which encodes a D-serine deaminase for genetic manipulation in Y. lipolytica. In Y. lipolytica, this marker confers the ability to use D-serine as a nitrogen source. In addition, the selection conditions of several infrequently used dominant markers including bleoR (zeocin resistance), kanMX (G418 resistance), and guaB (mycophenolic acid resistance) were also analyzed. Our results demonstrated that these selection markers can be used for the genetic manipulation of Y. lipolytica and their selection conditions were different for various strains. Ultimately, the selection markers tested here will be useful to expand the genetic toolbox of Y. lipolytica. KEY POINTS: • The dsdA from Escherichia coli was developed as a dominant marker. • The applicability of several resistance markers in Y. lipolytica was determined. • We introduced the Cre/mutant lox system for marker recycling.

Enhancing the physicochemical properties and bioactivities of 2'-hydroxyflavanone through fungal biotransformation

Flavonoids comprise a group of natural compounds with diverse bioactivities; however, their low water solubility and limited bioavailability often impede their potential health benefits for humans. In this study, five derivatives, namely 2',5'-dihydroxyflavanone (1), 2'-dihydroxyflavanone-5'-O-4″-O-methyl-β-d-glucoside (2), 2'-dihydroxyflavanone-6-O-4″-O-methyl-β-d-glucoside (3), 2'-dihydroxyflavanone-3'-O-4″-O-methyl-β-d-glucoside (4) and hydroxyflavanone-2'-O-4″-O-methyl-β-d-glucoside (5), were biosynthesized from 2'-hydroxyflavanone through microbial transformation using Beauveria bassiana ATCC 7159. Product 1 was identified as a known compound while 2-5 were structurally characterized as new structures through extensive 1D and 2D NMR analysis. The water solubility of biotransformed products 1-5 was enhanced by 30-280 times compared to the substrate 2'-hydroxyflavanone. Moreover, the antioxidant assay revealed that 1 and 2 exhibited improved 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity relative to the substrate, decreasing the logIC50 from 8.08 ± 0.11 μM to 6.19 ± 0.08 μM and 7.15 ± 0.08 μM, respectively. Compound 5 displayed significantly improved anticancer activity compared to the substrate 2'-hydroxyflavanone against Glioblastoma 33 cancer stem cells, decreasing the IC50 from 25.05 μM to 10.59 μM. Overall, fungal biotransformation represents an effective tool to modify flavonoids for enhanced water solubility and bioactivities.

Exploiting synthetic biology platforms for enhanced biosynthesis of natural products in Yarrowia lipolytica

With the rapid development of synthetic biology, researchers can design, modify, or even synthesize microorganisms de novo, and microorganisms endowed with unnatural functions can be considered "artificial life" and facilitate the development of functional products. Based on this concept, researchers can solve critical problems related to the insufficient supply of natural products, such as low yields, long production cycles, and cumbersome procedures. Due to its superior performance and unique physiological and biochemical characteristics, Yarrowia lipolytica is a favorable chassis cell used for green biomanufacturing by numerous researchers. This paper mainly reviews the development of synthetic biology techniques for Y. lipolytica and summarizes the recent research progress on the synthesis of natural products in Y. lipolytica. This review will promote the continued innovative development of Y. lipolytica by providing theoretical guidance for research on the biosynthesis of natural products.

Advances in Flavonoid Research: Sources, Biological Activities, and Developmental Prospectives

At present, the occurrence of a large number of infectious and non-communicable diseases poses a serious threat to human health as well as to drug development for the treatment of these diseases. One of the most significant challenges is finding new drug candidates that are therapeutically effective and have few or no side effects. In this respect, the active compounds in medicinal plants, especially flavonoids, are potentially useful compounds with a wide range of pharmacological activities. They are naturally present in nature and valuable in the treatment of many infectious and non-communicable diseases. Flavonoids are divided into fourteen categories and are mainly derived from plant extraction, chemical synthesis and structural modification, and biosynthesis. The structural modification of flavonoids is an important way to discover new drugs, but biosynthesis is currently considered the most promising research direction with the potential to revolutionize the new production pipeline in the synthesis of flavonoids. However, relevant problems such as metabolic pathway analyses and cell synthesis protocols for flavonoids need to be addressed on an urgent basis. In the present review, new research techniques for assessing the biological activities of flavonoids and the mechanisms of their biological activities are elucidated and their modes of interaction with other drugs are described. Moreover, novel drug delivery systems, such as nanoparticles, bioparticles, colloidals, etc., are gradually becoming new means of addressing the issues of poor hydrophilicity, lipophilicity, poor chemical stability, and low bioavailability of flavonoids. The present review summarizes the latest research progress on flavonoids, existing problems with their therapeutic efficacy, and how these issues can be solved with the research on flavonoids.

First-class - biosynthesis of 6-MSA and bostrycoidin type I polyketides in Yarrowia lipolytica

Fungal polyketides are a large group of secondary metabolites, valuable due to their diverse spectrum of pharmacological activities. Polyketide biosynthesis in filamentous fungi presents some challenges: small yield and low-purity titers. To tackle these issues, we switched to the yeast Yarrowia lipolytica, an easily cultivable heterologous host. As an oleaginous yeast, Y. lipolytica displays a high flux of acetyl- and malonyl-CoA precursors used in lipid synthesis. Likewise, acetyl- and malonyl-CoA are the building blocks of many natural polyketides, and we explored the possibility of redirecting this flux toward polyketide production. Despite its promising prospect, Y. lipolytica has so far only been used for heterologous expression of simple type III polyketide synthases (PKSs) from plants. Therefore, we decided to evaluate the potential of Y. lipolytica by targeting the more complex fungal polyketides synthesized by type I PKSs. We employed a CRISPR-Cas9-mediated genome editing method to achieve markerless gene integration of the genes responsible for bostrycoidin biosynthesis in Fusarium solani (fsr1, fsr2, and fsr3) and 6-methylsalicylic acid (6-MSA) biosynthesis in Aspergillus hancockii (6MSAS). Moreover, we attempted titer optimization through metabolic engineering by overexpressing two enzymes, TGL4 and AOX2, involved in lipid β-oxidation, but we did not observe an effect on polyketide production. With maximum titers of 403 mg/L 6-MSA and 35 mg/L bostrycoidin, the latter being substantially higher than our previous results in Saccharomyces cerevisiae (2.2 mg/L), this work demonstrates the potential of Y. lipolytica as a platform for heterologous production of complex fungal polyketides.

Optimizing the Biosynthesis of Dihydroquercetin from Naringenin in Saccharomyces cerevisiae

Dihydroquercetin (DHQ), known for its varied physiological benefits, is widely used in the food, chemical, and pharmaceutical industries. However, the efficiency of the DHQ synthesis is significantly limited by the substantial accumulation of intermediates during DHQ biosynthesis. In this study, DHQ production was achieved by integrating genes from various organisms into the yeast chromosome for the expression of flavanone-3-hydroxylase (F3H), flavonoid-3'-hydroxylase, and cytochrome P450 reductase. A computer-aided protein design approach led to the development of optimal F3H mutant P221A, resulting in a 1.67-fold increase in DHQ yield from naringenin (NAR) compared with the control. Subsequently, by analysis of the enzyme reaction and optimization of the culture medium composition, 637.29 ± 20.35 mg/L DHQ was synthesized from 800 mg/L NAR. This corresponds to a remarkable conversion rate of 71.26%, one of the highest reported values for DHQ synthesis from NAR to date.

Advances in pharmacology, biosynthesis, and metabolic engineering of Scutellaria-specialized metabolites

Scutellaria Linn., which belongs to the family Lamiaceae, is a commonly used medicinal plant for heat clearing and detoxification. In particular, the roots of S. baicalensis and the entire herb of S. barbata have been widely used in traditional medicine for thousands of years. The main active components of Scutellaria, including: baicalein, wogonin, norwogonin, scutellarein, and their glycosides have potential or existing drug usage. However, the wild resources of Scutellaria plants have been overexploited, and degenerated germplasm resources cannot fulfill the requirements of chemical extraction and clinical usage. Metabolic engineering and green production via microorganisms provide alternative strategies for greater efficiency in the production of natural products. Here, we review the progress of: pharmacological investigations, multi-omics, biosynthetic pathways, and metabolic engineering of various Scutellaria species and their active compounds. In addition, based on multi-omics data, we systematically analyze the phylogenetic relationships of Scutellaria and predict candidate transcription factors related to the regulation of active flavonoids. Finally, we propose the prospects of directed evolution of core enzymes and genome-assisted breeding to alleviate the shortage of plant resources of Scutellaria. This review provides important insights into the sustainable utilization and development of Scutellaria resources.

Segmentation and evaluation of pathway module efficiency: Quantitative approach to monitor and overcome evolving bottlenecks in xylose to ethanol pathway

Engineering microbes that can efficiently ferment xylose to ethanol is critical to the development of renewable fuels from lignocellulosic biomass. To accelerate the strain optimization process, a method termed Segmentation and Evaluation of Pathway Module Efficiency (SEPME) was developed to enable rapid and iterative identification and removal of metabolic bottlenecks. Using SEPME, the overall pathway was segmented into two modules: the upstream xylose assimilation pathway and the downstream pentose phosphate pathway, glycolysis, and fermentation. The efficiencies of both modules were then quantified to identify the rate controlling module, followed by analyses of control coefficients, reaction rates, and byproduct concentrations to narrow down targets within the module. SEPME analysis revealed that as the strain was engineered with increasing xylose-to-ethanol yields, the bottlenecks shifted within a module and across the two modules. Guided by SEPME, these bottlenecks were removed one by one, and a strain approaching the theoretical ethanol yield was obtained.

High-Level De Novo Production of (2S)-Eriodictyol in Yarrowia Lipolytica by Metabolic Pathway and NADPH Regeneration Engineering

(2S)-Eriodictyol, a polyphenolic flavonoid, has found widespread applications in health supplements and food additives. However, the limited availability of plant-derived (2S)-eriodictyol cannot meet the market demand. Microbial production of (2S)-eriodictyol faces challenges, including the low catalytic efficiency of flavone 3'-hydroxylase/cytochrome P450 reductase (F3'H/CPR), insufficient precursor supplementation, and inadequate NADPH regeneration. This study systematically engineered Yarrowia lipolytica for high-level (2S)-eriodictyol production. In doing this, the expression of F3'H/CPR was balanced, and the supply of precursors was enhanced by relieving feedback inhibition of the shikimate pathway, promoting fatty acid β-oxidation, and increasing the copy number of synthetic pathway genes. These strategies, combined with NADPH regeneration, achieved an (2S)-eriodictyol titer of 423.6 mg/L. Finally, in fed-batch fermentation, a remarkable 6.8 g/L (2S)-eriodictyol was obtained, representing the highest de novo microbial titer reported to date and paving the way for industrial production.

CRISPR/Cas9-based toolkit for rapid marker recycling and combinatorial libraries in Komagataella phaffii

Komagataella phaffii, a nonconventional yeast, is increasingly attractive to researchers owing to its posttranslational modification ability, strict methanol regulatory mechanism, and lack of Crabtree effect. Although CRISPR-based gene editing systems have been established in K. phaffii, there are still some inadequacies compared to the model organism Saccharomyces cerevisiae. In this study, a redesigned gRNA plasmid carrying red and green fluorescent proteins facilitated plasmid construction and marker recycling, respectively, making marker recycling more convenient and reliable. Subsequently, based on the knockdown of Ku70 and DNA ligase IV, we experimented with integrating multiple DNA fragments at a single locus. A 26.5-kb-long DNA fragment divided into 11 expression cassettes for lycopene synthesis could be successfully integrated into a single locus at one time with a success rate of 57%. A 27-kb-long DNA fragment could also be precisely knocked out with a 50% positive rate in K. phaffii by introducing two DSBs simultaneously. Finally, to explore the feasibility of rapidly balancing the expression intensity of multiple genes in a metabolic pathway, a yeast combinatorial library was successfully constructed in K. phaffii using lycopene as an indicator, and an optimal combination of the metabolic pathway was identified by screening, with a yield titer of up to 182.73 mg/L in shake flask fermentation. KEY POINTS: • Rapid marker recycling based on the visualization of a green fluorescent protein • One-step multifragment integration and large fragment knockout in the genome • A random assembly of multiple DNA elements to create yeast libraries in K. phaffii.

Systems Metabolic Engineering of Saccharomyces cerevisiae for the High-Level Production of (2S)-Eriodictyol

(2S)-eriodictyol (ERD) is a flavonoid widely found in citrus fruits, vegetables, and important medicinal plants with neuroprotective, cardioprotective, antidiabetic, and anti-obesity effects. However, the microbial synthesis of ERD is limited by complex metabolic pathways and often results in a low production performance. Here, we engineered Saccharomyces cerevisiae by fine-tuning the metabolism of the ERD synthesis pathway. The results showed that the ERD titer was effectively increased, and the intermediate metabolites levels were reduced. First, we successfully reconstructed the de novo synthesis pathway of p-coumaric acid in S. cerevisiae and fine-tuned the metabolic pathway using promoter engineering and terminator engineering for the high-level production of (2S)-naringenin. Subsequently, the synthesis of ERD was achieved by introducing the ThF3'H gene from Tricyrtis hirta. Finally, by multiplying the copy number of the ThF3'H gene, the production of ERD was further increased, reaching 132.08 mg L-1. Our work emphasizes the importance of regulating the metabolic balance to produce natural products in microbial cell factories.

Total Synthesis and Anti-Inflammatory Evaluation of Osajin, Scandenone and Analogues

In this study, the total synthesis of osajin, scandenone and their analogues have been accomplished. The key synthetic steps include aldol/intramolecular iodoetherification/elimination sequence reactions and a Suzuki coupling reaction to assemble the tricyclic core, chemoselective propargylation and Claisen rearrangement reactions to obtain natural compounds. In addition, we also designed and synthesized twenty-five natural product analogues. All synthetic compounds were screened for anti-inflammatory activity against tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6) in lipopolysaccharide (LPS)-stimulated RAW264.7 macrophages. Collectively, Compound 39e and 39d were considered as promising lead compounds for further development.

Engineering Yarrowia lipolytica for the biosynthesis of geraniol

Geraniol is a monoterpene with wide applications in the food, cosmetics, and pharmaceutical industries. Microbial production has largely used model organisms lacking favorable properties for monoterpene production. In this work, we produced geraniol in metabolically engineered Yarrowia lipolytica. First, two plant-derived geraniol synthases (GES) from Catharanthus roseus (Cr) and Valeriana officinalis (Vo) were tested based on previous reports of activity. Both wild type and truncated mutants of GES (without signal peptide targeting chloroplast) were examined by co-expressing with MVA pathway enzymes tHMG1 and IDI1. Truncated CrGES (tCrGES) produced the most geraniol and thus was used for further experimentation. The initial strain was obtained by overexpression of the truncated HMG1, IDI and tCrGES. The acetyl-CoA precursor pool was enhanced by overexpressing mevalonate pathway genes such as ERG10, HMGS or MVK, PMK. The final strain overexpressing 3 copies of tCrGES and single copies of ERG10, HMGS, tHMG1, IDI produced approximately 1 g/L in shake-flask fermentation. This is the first demonstration of geraniol production in Yarrowia lipolytica and the highest de novo titer reported to date in yeast.

Metabolic engineering in Streptomyces albidoflavus for the biosynthesis of the methylated flavonoids sakuranetin, acacetin, and genkwanin

Flavonoids are important plant secondary metabolites showing antioxidant, antitumor, anti-inflammatory, and antiviral activities, among others. Methylated flavonoids are particularly interesting compared to non-methylated ones due to their greater stability and intestinal absorption, which improves their oral bioavailability. In this work we have stablished a metabolic engineered strain of Streptomyces albidoflavus with enhanced capabilities for flavonoid production, achieving a 1.6-fold increase in the biosynthesis of naringenin with respect to the parental strain. This improved strain, S. albidoflavus UO-FLAV-004, has been used for the heterologous biosynthesis of the methylated flavonoids sakuranetin, acacetin and genkwanin. The achieved titers of sakuranetin and acacetin were 8.2 mg/L and 5.8 mg/L, respectively. The genkwanin titers were 0.8 mg/L, with a bottleneck identified in this producing strain. After applying a co-culture strategy, genkwanin production titers reached 3.5 mg/L, which represents a 4.4-fold increase. To our knowledge, this study presents the first biosynthesis of methylated flavonoids in not only any Streptomyces species, but also in any Gram-positive bacteria.

Cloning and Functional Characterization of NADPH-Cytochrome P450 Reductases in Aconitum vilmorinianum

Diterpenoid alkaloids (DAs) are major pharmacologically active ingredients of Aconitum vilmorinianum, an important medicinal plant. Cytochrome P450 monooxygenases (P450s) are involved in the DA biosynthetic pathway, and the electron transfer reaction of NADPH-cytochrome P450 reductase (CPR) with P450 is the rate-limiting step of the P450 redox reaction. Here, we identified and characterized two homologs of CPR from Aconitum vilmorinianum. The open reading frames of AvCPR1 and AvCPR2 were found to be 2103 and 2100 bp, encoding 700 and 699 amino acid residues, respectively. Phylogenetic analysis characterized both AvCPR1 and AvCPR2 as class II CPRs. Cytochrome c and ferricyanide could be reduced with the recombinant proteins of AvCPR1 and AvCPR2. Both AvCPR1 and AvCPR2 were expressed in the roots, stems, leaves, and flowers of A. vilmorinianum. The expression levels of AvCPR1 and AvCPR2 were significantly increased in response to methyl jasmonate (MeJA) treatment. The yeasts co-expressing AvCPR1/AvCPR2/SmCPR1 and CYP76AH1 all produced ferruginol, indicating that AvCPR1 and AvCPR2 can transfer electrons to CYP76AH1 in the same manner as SmCPR1. Docking analysis confirmed the experimentally deduced functional activities of AvCPR1 and AvCPR2 for FMN, FAD, and NADPH. The functional characterization of AvCPRs will be helpful in disclosing molecular mechanisms relating to the biosynthesis of diterpene alkaloids in A. vilmorinianum.

High-Efficiency Multiplexed Cytosine Base Editors for Natural Product Synthesis in Yarrowia lipolytica

Yarrowia lipolytica is an industrial host with a high fatty acid flux. Even though CRISPR-based tools have accelerated its metabolic engineering, there remains a need to develop tools for rapid multiplexed strain engineering to accelerate the design-build-test-learn cycle. Base editors have the potential to perform high-efficiency multiplexed gene editing because they do not depend upon double-stranded DNA breaks. Here, we identified that base editors are less toxic than CRISPR-Cas9 for multiplexed gene editing. We increased the editing efficiency by removing the extra nucleotides between tRNA and gRNA and increasing the base editor and gRNA copy number in a Ku70 deficient strain. We achieved five multiplexed gene editing in the ΔKu70 strain at 42% efficiency. Initially, we were unsuccessful at performing multiplexed base editing in NHEJ competent strain; however, we increased the editing efficiency by using a co-selection approach to enrich base editing events. Base editor-mediated canavanine gene (CAN1) knockout provided resistance to the import of canavanine, which enriched the base editing in other unrelated genetic loci. We performed multiplexed editing of up to three genes at 40% efficiency in the Po1f strain through the CAN1 co-selection approach. Finally, we demonstrated the application of multiplexed cytosine base editor for rapid multigene knockout to increase naringenin production by 2-fold from glucose or glycerol as a carbon source.

Fine-tuning of p-coumaric acid synthesis to increase (2S)-naringenin production in yeast

(2S)-Naringenin is a key precursor for biosynthesis of various high-value flavonoids and possesses a variety of nutritional and pharmaceutical properties on human health. Systematic optimization approaches have been employed to improve (2S)-naringenin production in different microbial hosts. However, very few studies have focused on the spatiotemporal distribution of (2S)-naringenin and the related pathway intermediate p-coumaric acid, which is an important factor for efficient production. Here, we first optimized the (2S)-naringenin biosynthetic pathway by alleviating the bottleneck downstream of p-coumaric acid and increasing malonyl-CoA supply, which improved (2S)-naringenin production but significant accumulation of p-coumaric acid still existed extracellularly. We thus established a dual dynamic control system through combining a malonyl-CoA biosensor regulator and an RNAi strategy, to autonomously control the synthesis of p-coumaric acid with the supply of malonyl-CoA. Furthermore, screening potential transporters led to identification of Pdr12 for improved (2S)-naringenin production and reduced accumulation of p-coumaric acid. Finally, a titer of 2.05 g/L (2S)-naringenin with negligible accumulation of p-coumaric acid was achieved in a fed batch fermentation. Our work highlights the importance of systematic control of pathway intermediates for efficient microbial production of plant natural products.

Optimized De Novo Eriodictyol Biosynthesis in Streptomyces albidoflavus Using an Expansion of the Golden Standard Toolkit for Its Use in Actinomycetes

Eriodictyol is a hydroxylated flavonoid displaying multiple pharmaceutical activities, such as antitumoral, antiviral or neuroprotective. However, its industrial production is limited to extraction from plants due to its inherent limitations. Here, we present the generation of a Streptomyces albidoflavus bacterial factory edited at the genome level for an optimized de novo heterologous production of eriodictyol. For this purpose, an expansion of the Golden Standard toolkit (a Type IIS assembly method based on the Standard European Vector Architecture (SEVA)) has been created, encompassing a collection of synthetic biology modular vectors (adapted for their use in actinomycetes). These vectors have been designed for the assembly of transcriptional units and gene circuits in a plug-and-play manner, as well as for genome editing using CRISPR-Cas9-mediated genetic engineering. These vectors have been used for the optimization of the eriodictyol heterologous production levels in S. albidoflavus by enhancing the flavonoid-3'-hydroxylase (F3'H) activity (by means of a chimera design) and by replacing three native biosynthetic gene clusters in the bacterial chromosome with the plant genes matBC (involved in extracellular malonate uptake and its intracellular activation into malonyl-CoA), therefore allowing more malonyl-CoA to be devoted to the heterologous production of plant flavonoids in this bacterial factory. These experiments have allowed an increase in production of 1.8 times in the edited strain (where the three native biosynthetic gene clusters have been deleted) in comparison with the wild-type strain and a 13 times increase in eriodictyol overproduction in comparison with the non-chimaera version of the F3'H enzyme.

Metabolic engineering for the high-yield production of polydatin in Yarrowia lipolytica

Polydatin, a glycosylated derivative of resveratrol, has better structural stability and biological activity than resveratrol. Polydatin is the extract of Polygonum cuspidatum, which has various pharmacological effects. Owing to its Crabtree-negative characteristics and high supply of malonyl-CoA, Yarrowia lipolytica was selected to produce polydatin. Initially, the resveratrol synthetic pathway was established in Y. lipolytica. By enhancing the shikimate pathway flow, redirecting carbon metabolism, and increasing the copies of key genes, a resveratrol yield of 487.77 mg/L was obtained. In addition, by blocking the degradation of polydatin, its accumulation was successfully achieved. Finally, by optimizing the glucose concentration and supplementing with two nutritional marker genes, a high polydatin yield of 6.88 g/L was obtained in Y. lipolytica, which is the highest titer of polydatin produced in a microbial host to date. Overall, this study demonstrates that Y. lipolytica has great potential for glycoside synthesis.

Biological valorization of lignin to flavonoids

Lignin is the most affluent natural aromatic biopolymer on the earth, which is the promising renewable source for valuable products to promote the sustainability of biorefinery. Flavonoids are a class of plant polyphenolic secondary metabolites containing the benzene ring structure with various biological activities, which are largely applied in health food, pharmaceutical, and medical fields. Due to the aromatic similarity, microbial conversion of lignin derived aromatics to flavonoids could facilitate flavonoid biosynthesis and promote the lignin valorization. This review thereby prospects a novel valorization route of lignin to high-value natural products and demonstrates the potential advantages of microbial bioconversion of lignin to flavonoids. The biodegradation of lignin polymers is summarized to identify aromatic monomers as momentous precursors for flavonoid synthesis. The biosynthesis pathways of flavonoids in both plants and strains are introduced and compared. After that, the key branch points and important intermediates are clearly discussed in the biosynthesis pathways of flavonoids. Moreover, the most significant enzyme reactions including Claisen condensation, cyclization and hydroxylation are demonstrated in the biosynthesis pathways of flavonoids. Finally, current challenges and potential future strategies are also discussed for transforming lignin into various flavonoids. The holistic microbial conversion routes of lignin to flavonoids could make a sustainable production of flavonoids and improve the feasibility of lignin valorization.

Strengthening microbial cell factories for efficient production of bioactive molecules

High demand of bioactive molecules (food additives, antibiotics, plant growth enhancers, cosmetics, pigments and other commercial products) is the prime need for the betterment of human life where the applicability of the synthetic chemical product is on the saturation due to associated toxicity and ornamentations. It has been noticed that the discovery and productivity of such molecules in natural scenarios are limited due to low cellular yields as well as less optimized conventional methods. In this respect, microbial cell factories timely fulfilling the requirement of synthesizing bioactive molecules by improving production yield and screening more promising structural homologues of the native molecule. Where the robustness of the microbial host can be potentially achieved by taking advantage of cell engineering approaches such as tuning functional and adjustable factors, metabolic balancing, adapting cellular transcription machinery, applying high throughput OMICs tools, stability of genotype/phenotype, organelle optimizations, genome editing (CRISPER/Cas mediated system) and also by developing accurate model systems via machine-learning tools. In this article, we provide an overview from traditional to recent trends and the application of newly developed technologies, for strengthening the systemic approaches and providing future directions for enhancing the robustness of microbial cell factories to speed up the production of biomolecules for commercial purposes.

Abolishing storage lipids induces protein misfolding and stress responses in Yarrowia lipolytica

Yarrowia lipolytica naturally saves excess carbon as storage lipids. Engineering efforts allow redirecting the high precursor flux required for lipid synthesis toward added-value chemicals such as polyketides, flavonoids, and terpenoids. To redirect precursor flux from storage lipids to other products, four genes involved in triacylglycerol and sterol ester synthesis (DGA1, DGA2, LRO1, and ARE1) can be deleted. To elucidate the effect of the deletions on cell physiology and regulation, we performed chemostat cultivations under carbon and nitrogen limitations, followed by transcriptome analysis. We found that storage lipid-free cells show an enrichment of the unfolded protein response, and several biological processes related to protein refolding and degradation are enriched. Additionally, storage lipid-free cells show an altered lipid class distribution with an abundance of potentially cytotoxic free fatty acids under nitrogen limitation. Our findings not only highlight the importance of lipid metabolism on cell physiology and proteostasis, but can also aid the development of improved chassy strains of Y. lipolytica for commodity chemical production.

Molecular Characterization of a Stereoselective and Promiscuous Flavanone 3-Hydroxylase from Carthamus tinctorius L

Flavanone 3-hydroxylases (F3Hs) belong to the 2-oxoglutarate-dependent dioxygenase family and play an important role in plant flavonoid biosynthesis. However, the stereoselective catalytic mechanism and substrate promiscuity of this type of enzyme are not well understood. In this study, we identified and biochemically characterized CtF3H1, an F3H from Carthamus tinctorius, a plant used in traditional Chinese medicine that exhibits high stereoselectivity and substrate promiscuity toward structurally diverse (2S)-flavanones. Isothermal titration calorimetry revealed that CtF3H1 exhibits distinctly different binding behaviors with (2S)-flavanone (2S-naringenin) and (2R)-flavanone (2R-naringenin), and these differences govern its stereoselectivity. An investigation of the structure-activity relationships between the enzyme and its substrates demonstrated that 7-OH and/or 4'-OH are necessary for regio- and stereoselective 3-hydroxylation of (2S)-flavanones. Homology modeling and molecular docking combined with site-directed mutagenesis identified the amino acid residues necessary for hydroxylation. These findings demonstrate the potential versatility of CtF3H1 in regio- and stereohydroxylation and provide molecular insights into the catalytic mechanism of F3H for further enzyme engineering.

Flavonoid Production: Current Trends in Plant Metabolic Engineering and De Novo Microbial Production

Flavonoids are secondary metabolites that represent a heterogeneous family of plant polyphenolic compounds. Recent research has determined that the health benefits of fruits and vegetables, as well as the therapeutic potential of medicinal plants, are based on the presence of various bioactive natural products, including a high proportion of flavonoids. With current trends in plant metabolite research, flavonoids have become the center of attention due to their significant bioactivity associated with anti-cancer, antioxidant, anti-inflammatory, and anti-microbial activities. However, the use of traditional approaches, widely associated with the production of flavonoids, including plant extraction and chemical synthesis, has not been able to establish a scalable route for large-scale production on an industrial level. The renovation of biosynthetic pathways in plants and industrially significant microbes using advanced genetic engineering tools offers substantial promise for the exploration and scalable production of flavonoids. Recently, the co-culture engineering approach has emerged to prevail over the constraints and limitations of the conventional monoculture approach by harnessing the power of two or more strains of engineered microbes to reconstruct the target biosynthetic pathway. In this review, current perspectives on the biosynthesis and metabolic engineering of flavonoids in plants have been summarized. Special emphasis is placed on the most recent developments in the microbial production of major classes of flavonoids. Finally, we describe the recent achievements in genetic engineering for the combinatorial biosynthesis of flavonoids by reconstructing synthesis pathways in microorganisms via a co-culture strategy to obtain high amounts of specific bioactive compounds.

Modular co-culture engineering of Yarrowia lipolytica for amorphadiene biosynthesis

Amorphadiene is the precursor to synthesize the antimalarial drug artemisinin. The production of amorphadiene and artemisinin from metabolically engineered microbes may provide an alternate to plant secondary metabolite extraction. Microbial consortia can offer division of labor, and microbial co-culture system can be leveraged to achieve cost-efficient production of natural products. Using a co-culture system of Y. lipolytica Po1f and Po1g strains, subcellular localization of ADS gene (encoding amorphadiene synthase) into the endoplasmic reticulum, co-utilization of mixed carbon source, and enlargement of the endoplasmic reticulum (ER) surface area, we were able to significantly improve amorphadiene production in this work. Using Po1g/PPtM and Po1f/AaADSER_x3/iGFMPDU strains and co-utilization of 5 µM sodium acetate with 20 g/L glucose in YPD media, amorphadiene titer were increased to 65.094 mg/L. The enlargement of the ER surface area caused by the deletion of the PAH1 gene provided more subcellular ER space for the action of the ADS-tagged gene. It further increased the amorphadiene production to 71.74 mg/L. The results demonstrated that the importance of the spatial localization of critical enzymes, and manipulating metabolic flux in the co-culture of Y. lipolytica can be efficient over a single culture for the bioproduction of isoprenoid-related secondary metabolites in a modular manner.

Valorization of Caribbean Sargassum biomass as a source of alginate and sugars for de novo biodiesel production

Since 2011, a massive influx of pelagic brown algae Sargassum has invaded coastlines causing environmental and economic disaster. Valorizing this plentiful macroalgae can present much needed economic relief to the areas affected. Here the production of biodiesel and a high-value alginate stream using Sargassum biomass collected from the coast of Quintana Roo, Mexico is reported. Biomass was pretreated via AEA (Alginate Extraction Autohydrolysis) and enzymatic saccharification via fungal Solid State Fermentation, releasing 7 g/L total sugars. The sugar mixture was fermented using engineered Yarrowia lipolytica resulting in 0.35 g/L total lipid titer at the lab tube scale. Additionally, the capability of extracting 0.3875 g/g DW of a high-value, purified alginate stream from this material is demonstrated. The findings presented here are promising and suggest an opportunity for the optimization and scale up of a biodiesel production biorefinery for utilization of Sargassum seaweeds during seasons of high invasion.

Identification of Hydroxylation Enzymes and the Metabolic Analysis of Dihydromyricetin Synthesis in Ampelopsis grossedentata

Ampelopsis grossedentata leaves are highly rich in dihydromyricetin. They have been used to make tea in China for centuries. Dihydromyricetin has many potential applications in foods and medicine. This are because it has five phenolic hydroxyl groups. However, the hydroxylases involving the biosynthesis of dihydromyricetin have not been identified and characterized. In this study, a series of hydroxylases genes, including flavanone 3-hydroxylase (F3H), flavonoid 3'-hydroxylase (F3'H), flavonoid 3',5'-hydroxylase (F3'5'H), and cytochrome P450 reductase (CPR), were identified after RNA sequencing. The full-length CDSs of AgF3H, AgF3'H, AgF3'5'H, and AgCPR genes were amplified from the cDNA library of leaves. The aforementioned enzymes were expressed and verified in Saccharomyces cerevisiae. Through the substrate specificity assay, the functional AgF3'H, AgF3'5'H, and AgCPR in A. grossedentata were identified. The dihydromyricetin hydroxylation process in A. grossedentata was successfully identified. We found that substantial carbon flux occurred through the Naringenin (NAR)-Eriodictyol (ERI)-Dihydroquercetin (DHQ)-Dihydromyricetin (DHM) and NAR-Dihydrokaempferol (DHK)-DHQ-DHM pathways. This study provides some reference for the development and utilization of the germplasm resources and molecular breeding of A. grossedentata.

Engineering caveolin-mediated endocytosis in Saccharomyces cerevisiae

As a potential substitute for fatty acids, common low-cost oils could be used to produce acetyl-CoA derivatives, which meet the needs of low-cost industrial production. However, oils are hydrophobic macromolecules and cannot be directly transported into cells. In this study, caveolin was expressed in Saccharomyces cerevisiae to absorb exogenous oils. The expression of caveolin fused with green fluorescent protein showed that caveolin mediated the formation of microvesicles in S. cerevisiae and the addition of 5,6-carboxyfluorescein showed that caveolae had the ability to transport exogenous substances into cells. The intracellular and extracellular triacylglycerol levels were then detected after the addition of soybean oil pre-stained with Nile Red, which proved that caveolae had the ability to absorb the exogenous oils. Lastly, caveolin for oils absorption and lipase from Bacillus pumilus for oil hydrolysis were co-expressed in the naringenin-producing Saccharomyces cerevisiae strain, resulting in naringenin production increasing from 222 mg/g DCW (dry cell weight) (231 mg/L) to 269 mg/g DCW (241 mg/L). These results suggested that the caveolin-mediated transporter independent oil transport system would provide a promising strategy for the transport of hydrophobic substrates.

Nonconventional Yeasts Engineered Using the CRISPR-Cas System as Emerging Microbial Cell Factories

Because the petroleum-based chemical synthesis of industrial products causes serious environmental and societal issues, biotechnological production using microorganisms is an alternative approach to achieve a more sustainable economy. In particular, the yeast Saccharomyces cerevisiae is widely used as a microbial cell factory to produce biofuels and valuable biomaterials. However, product profiles are often restricted due to the Crabtree-positive nature of S. cerevisiae, and ethanol production from lignocellulose is possibly enhanced by developing alternative stress-resistant microbial platforms. With desirable metabolic pathways and regulation in addition to strong resistance to diverse stress factors, nonconventional yeasts (NCY) may be considered an alternative microbial platform for industrial uses. Irrespective of their high industrial value, the lack of genetic information and useful gene editing tools makes it challenging to develop metabolic engineering-guided scaled-up applications using yeasts. The recently developed clustered regularly interspaced short palindromic repeats (CRISPR)-associated protein (Cas) system is a powerful gene editing tool for NCYs. This review describes the current status of and recent advances in promising NCYs in terms of industrial and biotechnological applications, highlighting CRISPR-Cas9 system-based metabolic engineering strategies. This will serve as a basis for the development of novel yeast applications.

Biosynthesis of cannabinoid precursor olivetolic acid in genetically engineered Yarrowia lipolytica

Engineering microbes to produce plant-derived natural products provides an alternate solution to obtain bioactive products. Here we report a systematic approach to sequentially identify the rate-limiting steps and improve the biosynthesis of the cannabinoid precursor olivetolic acid (OLA) in Yarrowia lipolytica. We find that Pseudomonas sp LvaE encoding a short-chain acyl-CoA synthetase can efficiently convert hexanoic acid to hexanoyl-CoA. The co-expression of the acetyl-CoA carboxylase, the pyruvate dehydrogenase bypass, the NADPH-generating malic enzyme, as well as the activation of peroxisomal β-oxidation pathway and ATP export pathway are effective strategies to redirect carbon flux toward OLA synthesis. Implementation of these strategies led to an 83-fold increase in OLA titer, reaching 9.18 mg/L of OLA in shake flask culture. This work may serve as a baseline for engineering cannabinoids biosynthesis in oleaginous yeast species.

Establishing an Autonomous Cascaded Artificial Dynamic (AutoCAD) regulation system for improved pathway performance

Endogenous metabolic pathways in microbial cells are usually precisely controlled by sophisticated regulation networks. However, the lack of such regulations when introducing heterologous pathways in microbial hosts often causes unbalanced enzyme expression and carbon flux distribution, hindering the construction of highly efficient microbial biosynthesis systems. Here, using naringenin as the target compound, we developed an Autonomous Cascaded Artificial Dynamic (AutoCAD) regulation system to automatically coordinate the pathway expression and redirect carbon fluxes for enhanced naringenin production. The AutoCAD regulation system, consisting of both intermediate-based feedforward and product-based feedback control genetic circuits, resulted in a 16.5-fold increase in naringenin titer compared with the static control. Fed-batch fermentation using the strain with AutoCAD regulation further enhanced the naringenin titer to 277.2 mg/L. The AutoCAD regulation system, with intermediate-based feedforward control and product-triggered feedback control, provides a new paradigm of developing complicated cascade dynamic control to engineer heterologous pathways.

Phylogenetic Analysis and Protein Modelling of Isoflavonoid Synthase Highlights Key Catalytic Sites towards Realising New Bioengineering Endeavours

Isoflavonoid synthase (IFS) is a critical enzyme for the biosynthesis of over 2400 isoflavonoids. Isoflavonoids are an important class of plant secondary metabolites that have a range of pharmaceutical and nutraceutical properties. With growing interest in isoflavonoids from both research and industrial perspectives, efforts are being forwarded to enhance isoflavonoid production in-planta and ex-planta; therefore, in-silico analysis and characterisation of available IFS protein sequences are needed. The present study is the first-ever attempt toward phylogenetic analysis and protein modelling of available IFS protein sequences. Phylogenetic analysis has shown that IFS amino acid sequences have 86.4% pairwise identity and 26.5% identical sites, and the sequences were grouped into six different clades. The presence of a β-hairpin and extra loop at catalytic sites of Trifolium pratense, Beta vulgaris and Medicago truncatula, respectively, compared with Glycyrrhiza echinata are critical structural differences that may affect catalytic function. Protein docking highlighted the preference of selected IFS for liquiritigenin compared with naringenin and has listed T. pratense as the most efficient candidate for heterologous biosynthesis of isoflavonoids. The in-silico characterisation of IFS represented in this study is vital in realising the new bioengineering endeavours and will help in the characterisation and selection of IFS candidate enzymes for heterologous biosynthesis of isoflavonoids.

Engineering Saccharomyces cerevisiae for the production of dihydroquercetin from naringenin

Background

Dihydroquercetin (DHQ), a powerful bioflavonoid, has a number of health-promoting qualities and shows potential as a treatment for a number of disorders. Dihydroquercetin biosynthesis is a promising solution to meet the rising demand for dihydroquercetin. However, due to the significant accumulation of eriodietyol (ERI), naringenin (NAR), dihydrokaempferol (DHK), and other metabolites, the yield of DHQ biosynthesis is low. As a result, this is the hindrance to the biosynthesis of DHQ.

Results

In this study, we proposed several strategies to enhance the product formation and reduce the metabolites in accumulation. The flavonoid 3′-hydroxylase (F3′H) and cytochrome P450 reductase from different species were co-expressed in S. cerevisiae, and the best strain expressing the P450-reductase enzyme complex (SmF3′H/ScCPR) yielded 435.7 ± 7.6 mg/L of ERI from NAR in the deepwell microplate. The product conversion rate was improved further by mutating the predicted potential ubiquitination sites to improve SmF3′H stability, resulting in a 12.8% increase in titre using the mutant SmF3′H (K290R). Besides, different F3Hs from various sources and promoters were tested for the improved DHQ production, with the best strain producing 381.2 ± 10.7 mg/L of DHQ from 1 g/L of NAR, suggesting the temporal regulation the expression of F3H is important for maximization the function of F3′H and F3H.

Conclusion

This study offers effective strategies for improving DHQ production from NAR and could be used as a reference for related research.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01937-8.

Engineered biosynthesis of plant polyketides by type III polyketide synthases in microorganisms

Plant specialized metabolites occupy unique therapeutic niches in human medicine. A large family of plant specialized metabolites, namely plant polyketides, exhibit diverse and remarkable pharmaceutical properties and thereby great biomanufacturing potential. A growing body of studies has focused on plant polyketide synthesis using plant type III polyketide synthases (PKSs), such as flavonoids, stilbenes, benzalacetones, curcuminoids, chromones, acridones, xanthones, and pyrones. Microbial expression of plant type III PKSs and related biosynthetic pathways in workhorse microorganisms, such as Saccharomyces cerevisiae, Escherichia coli, and Yarrowia lipolytica, have led to the complete biosynthesis of multiple plant polyketides, such as flavonoids and stilbenes, from simple carbohydrates using different metabolic engineering approaches. Additionally, advanced biosynthesis techniques led to the biosynthesis of novel and complex plant polyketides synthesized by diversified type III PKSs. This review will summarize efforts in the past 10 years in type III PKS-catalyzed natural product biosynthesis in microorganisms, especially the complete biosynthesis strategies and achievements.

Microbial cell factories for the production of flavonoids-barriers and opportunities

Flavonoids are natural plant products with important nutritional value, health-promoting benefits, and therapeutic potential. The use of microbial cell factories to generate flavonoids is an appealing option. The microbial biosynthesis of flavonoids is compared to the classic plant extract approach in this review, and the pharmaceutical applications were presented. This paper summarize approaches for effective flavonoid biosynthesis from microorganisms, and discuss the challenges and prospects of microbial flavonoid biosynthesis. Finally, the barriers and strategies for industrial bio-production of flavonoids are highlighted. This review offers guidance on how to create robust microbial cell factories for producing flavonoids and other relevant chemicals.

Plant Flavonoid Production in Bacteria and Yeasts

Flavonoids, a major group of secondary metabolites in plants, are promising for use as pharmaceuticals and food supplements due to their health-promoting biological activities. Industrial flavonoid production primarily depends on isolation from plants or organic synthesis, but neither is a cost-effective or sustainable process. In contrast, recombinant microorganisms have significant potential for the cost-effective, sustainable, environmentally friendly, and selective industrial production of flavonoids, making this an attractive alternative to plant-based production or chemical synthesis. Structurally and functionally diverse flavonoids are derived from flavanones such as naringenin, pinocembrin and eriodictyol, the major basic skeletons for flavonoids, by various modifications. The establishment of flavanone-producing microorganisms can therefore be used as a platform for producing various flavonoids. This review summarizes metabolic engineering and synthetic biology strategies for the microbial production of flavanones. In addition, we describe directed evolution strategies based on recently-developed high-throughput screening technologies for the further improvement of flavanone production. We also describe recent progress in the microbial production of structurally and functionally complicated flavonoids via the flavanone modifications. Strategies based on synthetic biology will aid more sophisticated and controlled microbial production of various flavonoids.

Metabolic engineering of Yarrowia lipolytica for scutellarin production

Scutellarin related drugs have superior therapeutic effects on cerebrovascular and cardiovascular diseases. Here, an optimal biosynthetic pathway for scutellarin was constructed in Yarrowia lipolytica platform due to its excellent metabolic potential. By integrating multi-copies of core genes from different species, the production of scutellarin was increased from 15.11 mg/L to 94.79 mg/L and the ratio of scutellarin to the main by-product was improved about 110-fold in flask condition. Finally, the production of scutellarin was improved 23-fold and reached to 346 mg/L in fed-batch bioreactor, which was the highest reported titer for de novo production of scutellarin in microbes. Our results represent a solid basis for further production of natural products on unconventional yeasts and have a potential of industrial implementation.

Engineering the Lipid and Fatty Acid Metabolism in Yarrowia lipolytica for Sustainable Production of High Oleic Oils

Oleic acid is widely applied in the chemical, material, nutritional, and pharmaceutical industries. However, the current production of oleic acid via high oleic plant oils is limited by the long growth cycle and climatic constraints. Moreover, the global demand for high oleic plant oils, especially the palm oil, has emerged as the driver of tropical deforestation causing tropical rainforest destruction, climate change, and biodiversity loss. In the present study, an alternative and sustainable strategy for high oleic oil production was established by reprogramming the metabolism of the oleaginous yeast Yarrowia lipolytica using a two-layer "push-pull-block" strategy. Specifically, the fatty acid synthesis pathway was first engineered to increase oleic acid proportion by altering the fatty acid profiles. Then, the content of storage oils containing oleic acid was boosted by engineering the synthesis and degradation pathways of triacylglycerides. The strain resulting from this two-layer engineering strategy produced the highest titer of high oleic microbial oil reaching 56 g/L with 84% oleic acid in fed-batch fermentation, representing a remarkable improvement of a 110-fold oil titer and 2.24-fold oleic acid proportion compared with the starting strain. This alternative and sustainable method for high oleic oil production shows the potential of substitute planting.

Advances in biochemistry and the biotechnological production of taxifolin and its derivatives

Taxifolin (dihydroquercetin) and its derivatives are medicinally important flavanonols with a wide distribution in plants. These compounds have been isolated from various plants, such as milk thistle, onions, french maritime, and tamarind. In general, they are commercially generated in semisynthetic forms. Taxifolin and related compounds are biosynthesized via the phenylpropanoid pathway, and most of the biosynthetic steps have been functionally characterized. The knowledge gained through the detailed investigation of their biosynthesis has provided the foundation for the reconstruction of biosynthetic pathways. Plant- and microbial-based platforms are utilized for the expression of such pathways for generating taxifolin-related compounds, either by whole-cell biotransformation or through reconfiguration of the genetic circuits. In this review, we summarize recent advances in the biotechnological production of taxifolin and its derivatives.

Production of phenylpropanoids and flavonolignans from glycerol by metabolically engineered Escherichia coli

Phenylpropanoids are a group of plant natural products with medicinal importance derived from aromatic amino acids. Here, we report the production of two representative phenylpropanoids-coniferyl alcohol (CA) and dihydroquercetin (DHQ)-from glycerol by engineered Escherichia coli. First, an E. coli strain capable of producing 187.7 mg/L of CA from glycerol was constructed by the introduction of hpaBC from E. coli and OMT1, 4CL4, and CCR1 from Arabidopsis thaliana to the p-coumaric acid producer. Next, an E. coli strain capable of producing 239.4 mg/L of DHQ from glycerol was constructed by the introduction of F3H, TT7, and CPR from A. thaliana to the naringenin producer, followed by engineering the signal peptide of a cytochrome P450 TT7. Furthermore, to demonstrate the production of flavonolignans, a group of heterodimeric phenylpropanoids, from glycerol, ascorbate peroxidase 1 from Silybum marianum was employed and engineered to produce 0.04 μg/L of silybin and 1.29 μg/L of isosilybin from glycerol by stepwise culture. Finally, a single strain harboring all the 16 necessary genes was constructed, resulting in 0.12 μg/L of isosilybin production directly from glycerol. The strategies described here will be useful for the production of pharmaceutically important yet complex natural products.

Genome-wide functional screens enable the prediction of high activity CRISPR-Cas9 and -Cas12a guides in Yarrowia lipolytica

Genome-wide functional genetic screens have been successful in discovering genotype-phenotype relationships and in engineering new phenotypes. While broadly applied in mammalian cell lines and in E. coli, use in non-conventional microorganisms has been limited, in part, due to the inability to accurately design high activity CRISPR guides in such species. Here, we develop an experimental-computational approach to sgRNA design that is specific to an organism of choice, in this case the oleaginous yeast Yarrowia lipolytica. A negative selection screen in the absence of non-homologous end-joining, the dominant DNA repair mechanism, was used to generate single guide RNA (sgRNA) activity profiles for both SpCas9 and LbCas12a. This genome-wide data served as input to a deep learning algorithm, DeepGuide, that is able to accurately predict guide activity. DeepGuide uses unsupervised learning to obtain a compressed representation of the genome, followed by supervised learning to map sgRNA sequence, genomic context, and epigenetic features with guide activity. Experimental validation, both genome-wide and with a subset of selected genes, confirms DeepGuide's ability to accurately predict high activity sgRNAs. DeepGuide provides an organism specific predictor of CRISPR guide activity that with retraining could be applied to other fungal species, prokaryotes, and other non-conventional organisms.

Mapping of Nonhomologous End Joining-Mediated Integration Facilitates Genome-Scale Trackable Mutagenesis in Yarrowia lipolytica

Genome-scale mutagenesis, phenotypic screening, and tracking the causal mutations is a powerful approach for genetic analysis. However, classic mutagenesis approaches require extensive effort to identify causal mutations. It is desirable to demonstrate a powerful approach for rapid trackable mutagenesis. Here, we mapped the distribution of nonhomologous end joining (NHEJ)-mediated integration for the first time and demonstrated that it can be used for constructing the genome-scale trackable mutagenesis library in Yarrowia lipolytica. The sequencing of 9.15 × 10⁵ insertions showed that NHEJ-mediated integration inserted DNA randomly across the chromosomes, and the transcriptional regulatory regions exhibited integration preference. The insertions were located in both nucleosome-occupancy regions and nucleosome-free regions. Using NHEJ-mediated integration to construct the genome-scale mutagenesis library, the new targets that improved β-carotene biosynthesis and acetic acid tolerance were identified rapidly. This mutagenesis approach is readily applicable to other organisms with strong NHEJ preference and will contribute to cell factory construction.

Comparative Molecular Mechanisms of Biosynthesis of Naringenin and Related Chalcones in Actinobacteria and Plants: Relevance for the Obtention of Potent Bioactive Metabolites

Naringenin and its glycosylated derivative naringin are flavonoids that are synthesized by the phenylpropanoid pathway in plants. We found that naringenin is also formed by the actinobacterium Streptomyces clavuligerus, a well-known microorganism used to industrially produce clavulanic acid. The production of naringenin in S. clavuligerus involves a chalcone synthase that uses p-coumaric as a starter unit and a P₄₅₀ monoxygenase, encoded by two adjacent genes (ncs-ncyP). The p-coumaric acid starter unit is formed by a tyrosine ammonia lyase encoded by an unlinked, tal, gene. Deletion and complementation studies demonstrate that these three genes are required for biosynthesis of naringenin in S. clavuligerus. Other actinobacteria chalcone synthases use caffeic acid, ferulic acid, sinapic acid or benzoic acid as starter units in the formation of different antibiotics and antitumor agents. The biosynthesis of naringenin is restricted to a few Streptomycess species and the encoding gene cluster is present also in some Saccharotrix and Kitasatospora species. Phylogenetic comparison of S. clavuligerus naringenin chalcone synthase with homologous proteins of other actinobacteria reveal that this protein is closely related to chalcone synthases that use malonyl-CoA as a starter unit for the formation of red-brown pigment. The function of the core enzymes in the pathway, such as the chalcone synthase and the tyrosine ammonia lyase, is conserved in plants and actinobacteria. However, S. clavuligerus use a P₄₅₀ monooxygenase proposed to complete the cyclization step of the naringenin chalcone, whereas this reaction in plants is performed by a chalcone isomerase. Comparison of the plant and S. clavuligerus chalcone synthases indicates that they have not been transmitted between these organisms by a recent horizontal gene transfer phenomenon. We provide a comprehensive view of the molecular genetics and biochemistry of chalcone synthases and their impact on the development of antibacterial and antitumor compounds. These advances allow new bioactive compounds to be obtained using combinatorial strategies. In addition, processes of heterologous expression and bioconversion for the production of naringenin and naringenin-derived compounds in yeasts are described.

Yarrowia lipolytica chassis strains engineered to produce aromatic amino acids via the shikimate pathway

Yarrowia lipolytica is widely used as a microbial producer of lipids and lipid derivatives. Here, we exploited this yeast's potential to generate aromatic amino acids by developing chassis strains optimized for the production of phenylalanine, tyrosine and tryptophan. We engineered the shikimate pathway to overexpress a combination of Y. lipolytica and heterologous feedback-insensitive enzyme variants. Our best chassis strain displayed high levels of de novo Ehrlich metabolite production (up to 0.14 g l-1 in minimal growth medium), which represented a 93-fold increase compared to the wild-type strain (0.0015 g l-1 ). Production was further boosted to 0.48 g l-1 when glycerol, a low-cost carbon source, was used, concomitantly to high secretion of phenylalanine precursor (1 g l-1 ). Among these metabolites, 2-phenylethanol is of particular interest due to its rose-like flavour. We also established a production pathway for generating protodeoxyviolaceinic acid, a dye derived from tryptophan, in a chassis strain optimized for chorismate, the precursor of tryptophan. We have thus demonstrated that Y. lipolytica can serve as a platform for the sustainable de novo bio-production of high-value aromatic compounds, and we have greatly improved our understanding of the potential feedback-based regulation of the shikimate pathway in this yeast.

Potential of Producing Flavonoids Using Cyanobacteria As a Sustainable Chassis

Numerous plant secondary metabolites have remarkable impacts on both food supplements and pharmaceuticals for human health improvement. However, higher plants can only generate small amounts of these chemicals with specific temporal and spatial arrangements, which are unable to satisfy the expanding market demands. Cyanobacteria can directly utilize CO₂, light energy, and inorganic nutrients to synthesize versatile plant-specific photosynthetic intermediates and organic compounds in large-scale photobioreactors with outstanding economic merit. Thus, they have been rapidly developed as a "green" chassis for the synthesis of bioproducts. Flavonoids, chemical compounds based on aromatic amino acids, are considered to be indispensable components in a variety of nutraceutical, pharmaceutical, and cosmetic applications. In contrast to heterotrophic metabolic engineering pioneers, such as yeast and Escherichia coli, information about the biosynthesis flavonoids and their derivatives is less comprehensive than that of their photosynthetic counterparts. Here, we review both benefits and challenges to promote cyanobacterial cell factories for flavonoid biosynthesis. With increasing concerns about global environmental issues and food security, we are confident that energy self-supporting cyanobacteria will attract increasing attention for the generation of different kinds of bioproducts. We hope that the work presented here will serve as an index and encourage more scientists to join in the relevant research area.

Anticancer Activity of Natural and Synthetic Chalcones

Cancer is a condition caused by many mechanisms (genetic, immune, oxidation, and inflammatory). Anticancer therapy aims to destroy or stop the growth of cancer cells. Resistance to treatment is theleading cause of the inefficiency of current standard therapies. Targeted therapies are the most effective due to the low number of side effects and low resistance. Among the small molecule natural compounds, flavonoids are of particular interest for theidentification of new anticancer agents. Chalcones are precursors to all flavonoids and have many biological activities. The anticancer activity of chalcones is due to the ability of these compounds to act on many targets. Natural chalcones, such as licochalcones, xanthohumol (XN), panduretin (PA), and loncocarpine, have been extensively studied and modulated. Modification of the basic structure of chalcones in order to obtain compounds with superior cytotoxic properties has been performed by modulating the aromatic residues, replacing aromatic residues with heterocycles, and obtaining hybrid molecules. A huge number of chalcone derivatives with residues such as diaryl ether, sulfonamide, and amine have been obtained, their presence being favorable for anticancer activity. Modification of the amino group in the structure of aminochalconesis always favorable for antitumor activity. This is why hybrid molecules of chalcones with different nitrogen hetercycles in the molecule have been obtained. From these, azoles (imidazole, oxazoles, tetrazoles, thiazoles, 1,2,3-triazoles, and 1,2,4-triazoles) are of particular importance for the identification of new anticancer agents.