Facile construction of multicompartment multienzyme system through layer-by-layer self-assembly and biomimetic mineralization

Coimmobilized Dual Enzymes in a Continuous Flow Reactor for the Efficient Synthesis of Optically Pure γ/δ-Lactones

Enzyme catalysis is a promising method for producing chiral chemicals with high stereoselectivity under mild conditions. However, the traditional batch reaction suffers from low enzyme stability, low cofactor recycling, and poor enzyme reusability. Here, we present a continuous-flow method using coimmobilized dual enzymes for the synthesis of chiral γ-/δ-lactones, which are widely used in fragrances and flavors. Typically, a carbonyl reductase mutant SmCRM5 from Serratia marcescens, was coimmobilized by covalent binding with BmGDH, a glucose dehydrogenase capable of recovering and recycling the cofactor NADPH. After immobilization, SmCRM5 and BmGDH exhibited a 8.9-/8.7-fold increase in catalytic efficiency (kcat/Km) and a 57-/15-fold increase in half-life at 30 °C, respectively. We demonstrated that coimmobilized dual enzymes used in a continuous flow reactor showed a higher reaction rate and a higher space-time yield (1586 g·L-1 d-1) than free enzymes and immobilized enzymes in a batch reaction for the production of (R)-δ-decalactone. This continuous flow reactor can run continuously for more than 650 h with 99% ee and 80% conversion, and the total volume exceeds 1500 reactor volumes. The robustness of this continuous-flow immobilized enzyme system provides a green and efficient method for the synthesis of high value-added chiral chemicals.

Four-electron reduction of CO2: from formaldehyde and acetal synthesis to complex transformations

The expansive and dynamic field of the CO2 Reduction Reaction (CO2RR) seeks to harness CO2 as a sustainable carbon source or energy carrier. While significant progress has been made in two, six, and eight-electron reductions of CO2, the four-electron reduction remains understudied. This review fills this gap, comprehensively exploring CO2 reduction into formaldehyde (HCHO) or acetal-type compounds (EOCH2OE, with E = [Si], [B], [Zr], [U], [Y], [Nb], [Ta] or -R) using various CO2RR systems. These encompass (photo)electro-, bio-, and thermal reduction processes with diverse reductants. Formaldehyde, a versatile C1 product, is challenging to synthesize and isolate from the CO2RR. The review also discusses acetal compounds, emphasizing their significance as pathways to formaldehyde with distinct reactivity. Providing an overview of the state of four-electron CO2 reduction, this review highlights achievements, challenges, and the potential of the produced compounds - formaldehyde and acetals - as sustainable sources for valuable product synthesis, including chiral compounds.

Single core and multicore aggregates from a polymer mixture: A dissipative particle dynamics study

HYPOTHESIS

Multicore block copolymer aggregates correspond to self-assembly such that the polymer system spontaneously phase separates to multiple, droplet-like cores differing in the composition from the polymer surroundings. Such multiple core aggregates are highly useful capsules for different applications, e.g., drug transport, catalysis, controlled solvation, and chemical reactions platforms. We postulate that polymer system composition provides a direct means for designing polymer systems that self-assemble to such morphologies and controlling the assembly response.

SIMULATIONS

Using dissipative particle dynamics (DPD) simulations, we examine the self-assembly of a mixture of highly and weakly solvophobic homopolymers and an amphiphilic block copolymer in the presence of solvent. We map the multicore vs single core (core-shell particles) assembly response and aggregate structure in terms of block copolymer concentration, polymer component ratios, and chain length of the weakly solvophobic homopolymer.

FINDINGS

For fixed components and polymer chemistries, the amount of block copolymer is the key to controlling single core vs multicore aggregation. We find a polymer system dependent critical copolymer concentration for the multicore aggregation and that a minimum level of incompatibility between the solvent and the weakly solvophobic component is required for multicore assembly. We discuss the implications for polymer system design for multicore assemblies. In summary, the study presents guidelines to produce multicore aggregates and to tune the assembly from multicore aggregation to single core core-shell particles.

Tannic Acid-Assisted Biomineralization Strategy for Encapsulation and Intracellular Delivery of Protein Drugs

Protein therapy has been considered to be one of the most direct and safe ways to regulate cell function and treat tumors. However, safe and effective intracellular delivery of protein drugs is still a key challenge. Herein, we developed a tannic acid-assisted biomineralization strategy for the encapsulation and intracellular delivery of protein drugs. RNase A and glucose oxidase (GOD) were choose as the protein drug model. RNase A, GOD, TA, and Mn²⁺ are mixed in one pot to attain RG@MT, and CaCO₃ coating is subsequently carried out to construct RG@MT@C through biomineralization. Once RG@MT@C is endocytosed, the acidic environment of the lysosome will dissolve the protective layer of CaCO₃ and produce plenty of CO₂ to cause lysosome bursting, ensuring the lysosome escape of the RG@MT@C and thus releasing the generated TA-Mn²⁺, RNase A, and GOD into the cytoplasm. The released substances would activate starvation therapy, chemodynamic therapy, and protein therapy pathways to ensure a high performance of cancer therapy. Due to simple preparation, low toxicity, and controlled release in the tumor microenvironment, we expect it can realize efficient and nondestructive delivery of protein drugs and meet the needs for precise, high performance of synergistically antitumor therapy in biomedical applications.

Nanoarchitectonics beyond perfect order - not quite perfect but quite useful

Nanoarchitectonics, like architectonics, allows the design and building of structures, but at the nanoscale. Unlike those in architectonics, and even macro-, micro-, and atomic-scale architectonics, the assembled structures at the nanoscale do not always follow the projected design. In fact, they do follow the projected design but only for self-assembly processes producing structures with perfect order. Here, we look at nanoarchitectonics allowing the building of nanostructures without a perfect arrangement of building blocks. Here, fabrication of structures from molecules, polymers, nanoparticles, and nanosheets to polymer brushes, layer-by-layer assembly structures, and hydrogels through self-assembly processes is discussed, where perfect order is not necessarily the aim to be achieved. Both planar substrate and spherical template-based assemblies are discussed, showing the challenging nature of research in this field and the usefulness of such structures for numerous applications, which are also discussed here.

Recent Advances in the Development and Antimicrobial Applications of Metal-Phenolic Networks

Due to the abuse of antibiotics and the emergence of multidrug resistant microorganisms, medical devices, and related biomaterials are at high risk of microbial infection during use, placing a heavy burden on patients and healthcare systems. Metal-phenolic networks (MPNs), an emerging organic-inorganic hybrid network system developed gradually in recent years, have exhibited excellent multifunctional properties such as anti-inflammatory, antioxidant, and antibacterial properties by making use of the coordination between phenolic ligands and metal ions. Further, MPNs have received widespread attention in antimicrobial infections due to their facile synthesis process, excellent biocompatibility, and excellent antimicrobial properties brought about by polyphenols and metal ions. In this review, different categories of biomaterials based on MPNs (nanoparticles, coatings, capsules, hydrogels) and their fabrication strategies are summarized, and recent research advances in their antimicrobial applications in biomedical fields (e.g., skin repair, bone regeneration, medical devices, etc.) are highlighted.

MIL-100(Fe) Sub-Micrometric Capsules as a Dual Drug Delivery System

Nanoparticles of metal–organic frameworks (MOF NPs) are crystalline hybrid micro- or mesoporous nanomaterials that show great promise in biomedicine due to their significant drug loading ability and controlled release. Herein, we develop porous capsules from aggregate of nanoparticles of the iron carboxylate MIL-100(Fe) through a low-temperature spray-drying route. This enables the concomitant one-pot encapsulation of high loading of an antitumor drug, methotrexate, within the pores of the MOF NPs, and the collagenase enzyme (COL), inside the inter-particular mesoporous cavities, upon the formation of the capsule, enhancing tumor treatment. This association provides better control of the release of the active moieties, MTX and collagenase, in simulated body fluid conditions in comparison with the bare MOF NPs. In addition, the loaded MIL-100 capsules present, against the A-375 cancer cell line, selective toxicity nine times higher than for the normal HaCaT cells, suggesting that MTX@COL@MIL-100 capsules may have potential application in the selective treatment of cancer cells. We highlight that an appropriate level of collagenase activity remained after encapsulation using the spray dryer equipment. Therefore, this work describes a novel application of MOF-based capsules as a dual drug delivery system for cancer treatment.

Multienzyme nanoassemblies: from rational design to biomedical applications

Multienzyme nanoassemblies (MENAs) that combine the functions of several enzymes into one entity have attracted widespread research interest due to their improved enzymatic performance and great potential for multiple applications. Considerable progress has been made to design and fabricate MENAs in recent years. This review begins with an introduction of the up-to-date strategies in designing MENAs, mainly including substrate channeling, compartmentalization and control of enzyme stoichiometry. The desirable properties that endow MENAs with important applications are also discussed in detail. Then, the recent advances in utilizing MENAs in the biomedical field are reviewed, with a particular focus on biosensing, tumor therapy, antioxidant and drug delivery. Finally, the challenges and perspectives for development of versatile MENAs are summarized.

Soft Materials that Intercept, Respond to, and Sequester Bacterial Siderophores

We report the design and characterization of Fe-containing soft materials that respond to, interface with, and/or sequester Fe-chelating 'siderophores' that bacteria use to scavenge for iron and regulate iron homeostasis. We demonstrate that metal-organic network coatings fabricated by crosslinking tannic acid with iron(III) are stable in bacterial growth media, but erode upon exposure to biologically relevant concentrations of enterobactin and deferoxamine B, two siderophores produced by Gram-negative and Gram-positive bacteria, respectively. Our results are consistent with changes in network stability triggered by the extraction of iron(III) and reveal rates of siderophore-induced disassembly to depend upon both siderophore concentration and affinity for iron(III). These coatings also disassemble when incubated in the presence of cultures of wild-type Escherichia coli. Assays using genetically modified strains of E. coli reveal the erosion of these materials by live cultures to be promoted by secretion of enterobactin and not from other factors resulting from bacterial growth and metabolism. This stimuli-responsive behavior can also be exploited to design coatings that release the Fe-chelating antibiotic ciprofloxacin into bacterial cultures. Finally, we report the discovery of Fe-containing polymer hydrogels that avidly sequester and scavenge enterobactin from surrounding media. The materials reported here are (i) capable of interfacing or interfering with mechanisms that bacteria use to maintain iron homeostasis, either by yielding iron to or by sequestering iron-scavenging agents from bacteria, and can (ii) respond dynamically to or report on the presence of populations of iron-scavenging bacteria. Our results thus provide new tools that could prove useful for microbiological research and enable new stimuli-responsive strategies for interfacing with or controlling the behaviors of communities of iron-scavenging bacteria.

Mimicking natural strategies to create multi-environment enzymatic reactors: From natural cell compartments to artificial polyelectrolyte reactors

Engineering microenvironments for sequential enzymatic reactions has attracted specific interest within different fields of research as an effective strategy to improve the catalytic performance of enzymes. While in industry most enzymatic reactions occur in a single compartment carrier, living cells are however able to conduct multiple reactions simultaneously within confined sub-compartments, or organelles. Engineering multi-compartments with regulated environments and transformation properties enhances enzyme activity and stability and thus increases the overall yield of final products. In this review, we discuss current and potential methods to fabricate artificial cells for sequential enzymatic reactions, which are inspired by mechanisms and metabolic pathways developed by living cells. We aim to advance the understanding of living cell complexity and its compartmentalization and present solutions to mimic these processes in vitro. Particular attention has been given to layer-by-layer assembly of polyelectrolytes for developing multi-compartments. We hope this review paves the way for the next steps toward engineering of smart artificial multi-compartments with adoptive stimuli-responsive properties, mimicking living cells to improve catalytic properties and efficiency of the enzymes and enhance their stability.

Multicore Assemblies from Three-Component Linear Homo-Copolymer Systems: A Coarse-Grained Modeling Study

Multicore polymer micelles and aggregates are assemblies that contain several cores. The dual-length-scale compartmentalized solvophobic–solvophilic molecular environment makes them useful for, e.g., advanced drug delivery, high-precision synthesis platforms, confined catalysis, and sensor device applications. However, designing and regulating polymer systems that self-assemble to such morphologies remains a challenge. Using dissipative particle dynamics (DPD) simulations, we demonstrate how simple, three-component linear polymer systems consisting of free solvophilic and solvophobic homopolymers, and di-block copolymers, can self-assemble in solution to form well-defined multicore assemblies. We examine the polymer property range over which multicore assemblies can be expected and how the assemblies can be tuned both in terms of their morphology and structure. For a fixed degree of polymerization, a certain level of hydrophobicity is required for the solvophobic component to lead to formation of multicore assemblies. Additionally, the transition from single-core to multicore requires a relatively high solvophobicity difference between the solvophilic and solvophobic polymer components. Furthermore, if the solvophilic polymer is replaced by a solvophobic species, well-defined multicore–multicompartment aggregates can be obtained. The findings provide guidelines for multicore assemblies’ formation from simple three-component systems and how to control polymer particle morphology and structure.

Research progress on enhancing the performance of autotrophic nitrogen removal systems using microbial immobilization technology

The autotrophic nitrogen removal process has great potential to be applied to the biological removal of nitrogen from wastewater, but its application is hindered by its unstable operation under adverse environmental conditions, such as those presented by low temperatures, high organic matter concentrations, or the presence of toxic substances. Granules and microbial entrapment technology can effectively retain and enrich microbial assemblages in reactors to improve operating efficiency and reactor stability. The carriers can also protect the reactor's internal microorganisms from interference from the external environment. This article critically reviews the existing literature on autotrophic nitrogen removal systems using immobilization technology. We focus our discussion on the natural aggregation process (granulation) and entrapment technology. The selection of carrier materials and entrapment methods are identified and described in detail and the mechanisms through which entrapment technology protects microorganisms are analyzed. This review will provide a better understanding of the mechanisms through which immobilization operates and the prospects for immobilization technology to be applied in autotrophic nitrogen removal systems.

Nature Inspired Multienzyme Immobilization: Strategies and Concepts

In a biological system, the spatiotemporal arrangement of enzymes in a dense cellular milieu, subcellular compartments, membrane-associated enzyme complexes on cell surfaces, scaffold-organized proteins, protein clusters, and modular enzymes have presented many paradigms for possible multienzyme immobilization designs that were adapted artificially. In metabolic channeling, the catalytic sites of participating enzymes are close enough to channelize the transient compound, creating a high local concentration of the metabolite and minimizing the interference of a competing pathway for the same precursor. Over the years, these phenomena had motivated researchers to make their immobilization approach naturally realistic by generating multienzyme fusion, cluster formation via affinity domain-ligand binding, cross-linking, conjugation on/in the biomolecular scaffold of the protein and nucleic acids, and self-assembly of amphiphilic molecules. This review begins with the discussion of substrate channeling strategies and recent empirical efforts to build it synthetically. After that, an elaborate discussion covering prevalent concepts related to the enhancement of immobilized enzymes' catalytic performance is presented. Further, the central part of the review summarizes the progress in nature motivated multienzyme assembly over the past decade. In this section, special attention has been rendered by classifying the nature-inspired strategies into three main categories: (i) multienzyme/domain complex mimic (scaffold-free), (ii) immobilization on the biomolecular scaffold, and (iii) compartmentalization. In particular, a detailed overview is correlated to the natural counterpart with advances made in the field. We have then discussed the beneficial account of coassembly of multienzymes and provided a synopsis of the essential parameters in the rational coimmobilization design.

Research progress and the biotechnological applications of multienzyme complex

The multienzyme complex system has become a research focus in synthetic biology due to its highly efficient overall catalytic ability and has been applied to various fields. Multienzyme complexes are formed by cascading complexes, which are multiple functionally related enzymes that continuously and efficiently catalyze the production of substrates. Compared with current mainstream microbial cell catalytic systems, in vitro multienzyme molecular machines have many advantages, such as fewer side reactions, a high product yield, a fast reaction speed, easy product separation, a tolerable toxic environment, and robust system operability, showing increasing competitiveness in the field of biomanufacturing. In this review, the research progress of multienzyme complexes in nature and multienzyme cascades in vivo or in vitro will be introduced, and the discovered enzyme cascades concerning scaffolding proteins will also be discussed. This review is expected to provide a more theoretical basis for the modification of multienzyme complexes and broaden their application in the field of synthetic biology. KEY POINTS: • The cascade reactions of some natural multienzyme complexes are reviewed. • The main approaches of constructing artificial multienzyme complexes are summarized. • The structure and application of cellulosomes are discussed and prospected.

Oriented immobilization of enzyme-DNA conjugates on magnetic Janus particles for constructing a multicompartment multienzyme system with high activity and stability

Various organelles (e.g., mitochondria and chloroplasts) have a multicompartment structure, providing superior function of material transformation, selective segregation and energy conversion. Enlightened by the elegant evolution of nature, intended isolation of the biochemical process by cooperative multicompartments in cells has become an appealing blueprint to construct bioreactors. In this study, we develop a "soft separation" way to establish a delicate multicompartment multienzyme system (MMS) with polyphenol-encapsulated enzyme-DNA conjugates, which are anchored on magnetic Janus particles, providing a biomimetic catalysis network with the model cascade reactions in confinement. The well-designed MMS exhibits preferable bioactivity benefitting from the dependable DNA bridges and the oriented immobilization of enzymes, while the polyphenol shell further protects the anchored enzymes from exterior attacks, such as heat and enzymatic degradation. Moreover, by applying the MMS as nanomotors, the asymmetrical distribution of enzymes on Janus particles is found to improve mutual elevation between the self-driven locomotion and enzyme-mediated reactions, delivering enhanced dispersal ability and bioactivity. Owing to the excellent enzymatic activity, promoted stability and satisfying biocompatibility, the assembled MMS is proved to be promising for the in vitro and intracellular sensing of glucose, showing significant potential for biochemical analysis applications.

Metal-Phenolic Network Covering on Zein Nanoparticles as a Regulator on the Oil/Water Interface

Interfacial self-assembly has become a powerful force for regulating the amphipathy of Pickering emulsions on the oil/water interface. Herein, metal-phenolic supramolecular coatings, acting as a regulator on the oil/water interface, were fabricated on the surface of zein nanoparticles (NPs), as a consequence of which the prepared Pickering emulsions stabilized by the decorated zein NPs exhibited diverse properties, decided by different concentrations of zein, tannic acid (TA), and metal ions (Fe³⁺). Metal-phenolic network-decorated zein NPs named ZTFex NPs (ZTFe NPs represented zein/TA/Fe³⁺ NPs, and x represented different concentrations of compounds) exhibited increasing diameters of 100-110 nm. Three-phase contact angles also showed that the strong hydrophobicity of zein NPs could be decreased as a result of the formation of metal-phenolic networks. As for corresponding Pickering emulsions, the covering of TA-Fe³⁺ networks on zein NPs could enhance the stability of zein NP-based emulsion obviously, which might be due to the fact that ZTFex NPs revealed the ability to form strong films on the oil/water interfaces. ZTFe4 was selected as an optimal concentration because of its minimum size and excellent storage stability. Besides, it was also found that the diameter of ZTFe4-based emulsion enhanced with the increase in the oil phase. The rheological measurement results showed that both G' and G″ increased with the increase of x and the oil phase. In general, our paper not only highlighted a straightforward method for the interfacial nanofabrication of solid particles but also provided a novel and potential strategy in Pickering emulsion applications.

Positional assembly of multi-enzyme cascade reaction in polyelectrolyte doped microcapsule through electrospray and layer-by-layer assembly

Polyelectrolyte-doped microcapsules (PDM) was fabricated by coaxial electrospray of a mixture of glycerol and water containing 10 mg/mL cationic polyelectrolyte poly(allylamine hydrochloride) (PAH) fed as the core phase solution, and a N,N-dimethylacetylamide solution of 10 wt% polyurethane fed as the shell phase solution. Multi-enzyme system involving Candida Antarctica lipase B (CALB), glucose oxidase (GOD), and horseradish peroxidase (HRP) for cascade reaction was assembled in the PDM at three different places, namely, surface, shell, and lumen. Placing of enzyme inside aqueous lumen of the PDM was realized by in situ encapsulation through adding the enzyme in the core-phase solution for coaxial electrospray. By ion-pairing of enzyme with cationic surfactant CTAB, an organic soluble enzyme-CTAB complex was prepared, so that in situ embedding of enzyme in the shell of the PDM was realized by adding it into the shell phase solution. Surface attachment of enzymes was achieved by layer-by-layer (LbL) technology, which is based on the ion-exchange interactions between oppositely charged enzymes and PAH that was doped in PDM. The enzyme-decorated microcapsule was then studied as a micro-bioreactor, in which 1-Oxododecyla-α-glucopyranoside was converted by CALB to glucose, which was oxidised by GOD to gluconolactone in a second step. The hydrogen peroxide produced was then used by HRP to oxidize ABTS to form coloured radical cation ABTS•⁺ for activity analysis. The successful fabrication of the PDM and precise localization of enzymes in the PDM by different strategies were fully characterized. By varying the immobilization strategy, totally six PDM bioreactors with three enzymes precisely positional assembled in different strategies were constructed and their activities for the cascade reaction were investigated and compared. The PDM micro-bioreactor prepared by novel electrospray technologies provide a smart platform for positional assembly of multi-enzyme cascade reaction in a precise and well-controlled manner.

Construction of a Multienzymatic Cascade Reaction System of Coimmobilized Hybrid Nanoflowers for Efficient Conversion of Starch into Gluconic Acid

Introducing an efficient method for the rapid conversion of starch into gluconic acid is desirable to solve the current problems existing in traditional gluconic acid preparation processes. In this study, a robust and easy-to-use multienzymatic cascade reaction system of coimmobilized GA@GOx hybrid nanoflowers with a specific spatial distribution of enzymes by compartmentalization was constructed and applied to catalyze starch to gluconic acid in one pot. In the preparation processes, the glucose oxidase (GOx) hybrid nanoflowers were first synthesized via a self-assembly mechanism, and then, glucoamylase (GA) was adsorbed on the surface of GOx hybrid nanoflowers through the interaction of Cu²⁺ and amino acids of GA. The optimum preparation conditions and reaction parameters of the GA@GOx hybrid nanoflowers had been investigated. In addition, the morphology, composition, and crystallization of the GA@GOx hybrid nanoflowers had been fully studied. Based on the lower K_m, the GA@GOx hybrid nanoflowers with compartmentalization had a better effect of the substrate channeling on the catalytic efficiency. The final results indicated that the overall enzyme activity of the GA@GOx hybrid nanoflowers increased by 1.5 times, and the conversion efficiency was 92.12% within 80 min significantly superior to the free multienzyme system, which showed the outstanding conversion of starch into gluconic acid in one pot.

Layered Co-Immobilization of β-Glucosidase and Cellulase on Polymer Film by Visible-Light-Induced Graft Polymerization

Exploring a suitable immobilization strategy to improve catalytic efficiency and reusability of cellulase is of great importance to lowering the cost and promoting the industrialization of cellulose-derived bioethanol. In this work, a layered structure with a thin PEG hydrogel as the inner layer and sodium polyacrylate (PAANa) brush as the outer layer was fabricated on low density polyethylene (LDPE) film by visible-light-induced graft polymerization. Two enzymes, β-glucosidase (BG) and cellulase, were separately coimmobilized onto this hierarchical film. As supplementary to cellulase for improving catalytic efficiency, BG was in situ entrapped into the inner PEG hydrogel layer during the graft polymerization from the LDPE surface. After graft polymerization of sodium acrylate on the PEG hydrogel layer was reinitiated, cellulase was covalently attached on the outer PAANa brush layer. Owing to the mild reaction condition (visible-light irradiation and room temperature), the immobilized BG could retain a high activity after the graft polymerization. The immobilization did not alter the optimal pH and temperature of BG or the optimal temperature of cellulase. However, the optimal pH of cellulase shifts to 5.0 after immobilization. Compared with the original activity of single cellulase system and isolated BG/cellulase immobilization system, the dual-enzyme system exhibited 82% and 20% increase in catalytic activity, respectively. The dual-enzyme system could maintain 93% of carboxymethylcellulose sodium salt (CMC) activity after repeating 10 cycles of hydrolysis and 89% of filter paper activity after 6 cycles relative to original activity, exhibiting excellent reusability. This layer coimmobilization system of BG and cellulase on the polymer film displays tremendous potential for practical application in a biorefinery.

Facile preparation of aminosilane-alginate hybrid beads for enzyme immobilization: Kinetics and equilibrium studies

A simple, facile and potential platform for enzyme immobilization using alginate-based beads has been demonstrated by simultaneous gelation and modification of alginate using calcium chloride (CaCl₂) and 3-aminopropyltriethoxysilane (APTES). In this method, sodium alginate solution containing enzyme was simply dripped into a crosslinker solution containing CaCl₂ and APTES, leading to the formation of APTES-alginate hybrid beads (AP-beads). The optical observation, FT-IR analysis and amino group measurements provided evidence that APTES was successfully adsorbed to the alginate chain via electrostatic interaction. On the assumption that the binding of Ca²⁺ ion to polymannuronate residues of alginate via bidentate bridging coordination is competitive with APTES, the equilibrium isotherm and kinetics for the adsorption of APTES to AP-beads was found to follow extended Langmuir isotherm in binary system. Formate dehydrogenase (FDH) as a model enzyme was successfully immobilized in AP-beads and the immobilization yield of ca. 100% could be achieved under optimal conditions of CaCl₂ and APTES concentrations in crosslinker solution. Furthermore, the AP-beads were reused efficiently for 9 cycles without loss of FDH activity. The above results demonstrated that AP-beads were effective support for enzyme immobilization.

Physicochemical considerations for bottom-up synthetic biology

The bottom-up construction of synthetic cells from molecular components is arguably one of the most challenging areas of research in the life sciences. We review the impact of confining biological systems in synthetic vesicles. Complex cell-like systems require control of the internal pH, ionic strength, (macro)molecular crowding, redox state and metabolic energy conservation. These physicochemical parameters influence protein activity and need to be maintained within limits to ensure the system remains in steady-state. We present the physicochemical considerations for building synthetic cells with dimensions ranging from the smallest prokaryotes to eukaryotic cells.

Monodisperse Alginate Microcapsules with Spatially Confined Bioactive Molecules via Microfluid-Generated W/W/O Emulsions

A simple process is developed for the one-step preparation of dual-compartment alginate microcapsules with controlled size and structure from microfluid-generated water-in-water-in-oil (W/W/O) emulsion droplet. Unlike other methods that rely on transient W/W/O emulsion droplet, we introduce an aqueous two-phase system (ATPS) to form a stable W/W/O emulsion droplet as a template for preparing dual-compartment alginate microcapsules. Two different bioactive molecules are able to be spatially confined encapsulated in the shell and core of alginate microcapsules due to the partitioning effect of ATPS and the high viscosity of alginate solution. Moreover, an enzyme cascade reaction with a spatial confined glucose oxidase and horseradish peroxidase in the shell and core of alginate microcapsules confirms its excellent biocompatibility and high activity. This method provides a green platform for enzyme-catalyzed tandem reactions and controlled sequential release of multiple drugs based on alginate microcapsules.

Supramolecular design and applications of polyphenol-based architecture: A review

Polyphenol-based materials are of wide-spread interest because of the unique properties of the polyphenol itself. Tannic acid, contains high level of galloyl groups, could be coordinated to a range of metal ions to generate robust mental ion-TA films on substrate or even forming hollow capsules. These films or capsules can be used in the field of sensing, separation and catalysis, most importantly in drug/nutraceutical delivery, allowing for the high loading efficiency, high mechanical and thermal stability, pH-responsive disassembly and fluorescence behavior. Additionally, such coating could also provide protection of the sensitive molecules and cells. With the numerous carbonyl and phenolic functional groups, TA has also been demonstrated to form strong hydrogen bonded multilayers with various non-ionic polymers. The properties of the hydrogen-bonded system were highly influenced by the chemical structure of the polymers, which will change the behavior of pH-, temperature- or ionic strength-responsive release of the loading molecules. Additionally, the ionization of galloyl phenol group was attributed to the interaction between TA and other ionic polymers by electrostatic interaction. The electrostatic interaction/hydrogen bonding derived TA/polyme$$%r complexes could deposit on glass slides, microcores or even forming hollow capsules, promising in their applicability to nutraceutical encapsulation, delivery and depot. Notably, polyphenols self-polymerizing could also deposit coatings on different substrates without any exogenous additives, while the comprehensive undertanding about the self-polymerizing mechenism remains unclear. This review provides a promising prospect for utilizing polyphenol-based materials to design versatile architecture in different system, used in the field of chemistry and materials science.

Pegylated Metal-Phenolic Networks for Antimicrobial and Antifouling Properties

Metal-phenolic networks (MPNs) have recently attracted great interest in material chemistry and biomaterials because of their biocompatible, versatile, and multifunctional properties. In this paper, we describe a facile method for preparation of a designable antifouling, antimicrobial, and substrate-independent coating assembled from the coordination of metal ions and catecholic groups. Hydrophilic and catecholic polymers were synthesized by copolymerization of dopamine methacrylamide (DMA) and poly(ethylene glycol)methyl methacrylate (PEGMA) to afford p(PEGMA- co-DMA). To investigate the assembly and formation of MPN films, two different metal ions, that is, ferrous (Fe^II) and ferric (Fe^III) ions, to react with p(PEGMA- co-DMA) were compared. The binding constants between iron ions and p(PEGMA- co-DMA) have been investigated by ultraviolet-visible spectroscopy (UV-vis). Measurements with atomic force microscopy, contact angle goniometer, and X-ray photoelectron spectroscopy (XPS) were carried out to quantitatively analyze the surface morphology, wettability, and interfacial elemental compositions of coatings, respectively. Moreover, ellipsometric measurements were performed to obtain the film thickness and grafting density. In addition, the pH-responsive property of the MPN films was investigated at different pH values, showing fast disassembly of the networks at low pH. The antifouling properties of the obtained coatings were analyzed by exposing them to bacteria of Escherichia coli and Staphylococcus epidermidis and NIH-3T3 fibroblasts under observation of fluorescence microscopy and cell imaging analysis. The findings suggest that the MPN from complexation of p(PEGMA- co-DMA) and metal ions provides excellent antifouling, pH-responsive, and biocompatible properties on a wide range of substrates. Furthermore, the released iron ions can effectively suppress the growth of bacteria. Accordingly, the new coating architecture offers a universal feature to control surface properties and functionalization for various applications.

Effect of Block Length and Side Chain Length Ratios on Determining a Multicompartment Micelle Structure

Previous work has identified the importance of the lipophilic-fluorophilic block length ratio Rl in predicting the morphology of linear lipophilic-hydrophilic-fluorophilic (hereafter referred to as BAC) micelle systems. Here, a generalized form R of this structural parameter is developed that makes no assumption of BAC triblock co-polymer linearity, while still providing accurate predictions of the micelle morphology. The morphologies of BAC micelles formed by triblock co-polymers with R≪1 or R≫1 have similar features, with the only notable difference being an inversion of the lipophilic and fluorophilic regions. A destabilization of the single-core micelle structure occurs as R approaches unity from either direction. Finally, the extent to which the micelle morphology depends on the polymer architecture instead of the composition alone is examined, with a decreased patchiness observed in BAC systems with very long block lengths. Through the modification of both the R -value and the polymer architecture, the micelle morphology can be effectively tuned for use in immobilized catalysis and nanoreactor applications.

Layer-by-layer coated porous 3D printed hydroxyapatite composite scaffolds for controlled drug delivery

Interconnected porous scaffolds are widely used in the applications of tissue repair and regeneration. Sustained local delivery of drugs and growth factors around the implanted scaffolds could accelerate the growth of cells and contribute to the regeneration of damaged tissues. In this study, porous hydroxyapatite composite scaffolds were prepared through 3D bio-printing for bone tissue engineering and were subsequently coated with chitosan and sodium hyaluronate by layer-by-layer (LBL) deposition. It was found that the LBL coating on the porous scaffolds could reduce the swelling ratio of scaffolds in size and increase the compressive strength by about 70%. The degradation rate of the scaffolds slowed down due to the LBL coating. Rhodamine B (RHB) and bovine serum albumin (BSA) were chosen as model drugs in order to understand the loading and release behaviors of the scaffolds. Small RHB molecules could penetrate deep into the LBL coated scaffolds and released a little slower than that without coating. Meanwhile, large BSA molecules showed faster release rate compared to that without coating. In addition, there was no significant cytotoxicity effect of these composite scaffolds towards MC-3T3E1 cells and the scaffolds provided proper conditions for cell adhesion and proliferation, indicating that the printed hydroxyapatite composite scaffolds exhibit a great potential in hard tissue engineering as a sustained delivery system.

Bioinspired construction of multi-enzyme catalytic systems

Enzyme catalysis, as a green, efficient process, displays exceptional functionality, adaptivity and sustainability. Multi-enzyme catalysis, which can accomplish the tandem synthesis of valuable materials/chemicals from renewable feedstocks, establishes a bridge between single-enzyme catalysis and whole-cell catalysis. Multi-enzyme catalysis occupies a unique and indispensable position in the realm of biological reactions for energy and environmental applications. Two complementary strategies, i.e., compartmentalization and substrate channeling, have been evolved by living organisms for implementing the complex in vivo multi-enzyme reactions (MERs), which have been applied to construct multi-enzyme catalytic systems (MECSs) with superior catalytic activity and stabilities in practical biocatalysis. This tutorial review aims to present the recent advances and future prospects in this burgeoning research area, stressing the features and applications of the two strategies for constructing MECSs and implementing in vitro MERs. The concluding remarks are presented with a perspective on the construction of MECSs through rational combination of compartmentalization and substrate channeling.

Alginate Microcapsules as Nutrient Suppliers: An In Vitro Study

Objective

Alginate, known as a group of anionic polysaccharides extracted from seaweeds, has attracted the attention of researchers because of its biocompatibility and degradability properties. Alginate has shown beneficial effects on wound healing as it has similar function as extracellular matrix. Alginate microcapsules (AM) that are used in tissue engineering as well as Dulbecco’s modified Eagle’s medium (DMEM) contain nutrients required for cell viability. The purpose of this research was introducing AM in medium and nutrient reagent cells and making a comparison with control group cells that have been normally cultured in long term.

Materials and Methods

In this experimental study, AM were shaped in distilled water, it was dropped at 5 mL/hours through a flat 25G5/8 sterile needle into a crosslinking bath containing 0.1 M calcium chloride to produce calcium alginate microspheres. Then, the size of microcapsules (300-350 µm) were confirmed by Scanning Electron Microscopy (SEM) images after the filtration for selection of the best size. Next, DMEM was injected into AM. Afterward, adipose- derived mesenchymal stem cells (ADSCs) and Ringer’s serum were added. Then, MTT and DAPI assays were used for cell viability and nucleus staining, respectively. Also, morphology of microcapsules was determined under invert microscopy.

Results

Evaluation of the cells performed for spatial media/microcapsules at the volume of 40 µl, showed ADSCs after 1-day cell culture. Also, MTT assay results showed a significant difference in the viability of sustained-release media injected to microcapsules (P<0.05). DAPI staining revealed living cells on the microcapsules after 1 to 7-day cell culture.

Conclusion

According to the results, AM had a positive effect on cell viability in scaffolds and tissue engineering and provide nutrients needed in cell therapy.

Contribution of convection and diffusion to the cascade reaction kinetics of β-galactosidase/glucose oxidase confined in a microchannel

The spatial positioning of enzymes and mass transport play crucial roles in the functionality and efficiency of enzyme cascade reactions. To fully understand the mass transport regulating kinetics of enzyme cascade reactions, we investigated the contribution of convective and diffusive transports to a cascade reaction of β-galactosidase (β-Gal)/glucose oxidase (GOx) confined in a microchannel. β-Gal and GOx are assembled on two separated gold films patterned in a polydimethylsiloxane (PDMS) microchannel with a controllable distance from 50 to 100 μm. Experimental results demonstrated that the reaction yield increases with decreasing distance between two enzymes and increasing substrate flow rate. Together with the simulation results, we extracted individual reaction kinetics of the enzyme cascade reaction and found that the reaction rate catalyzed by β-Gal occurred much faster than by GOx, and thus, the β-Gal catalytic reaction showed diffusion controll, whereas the GOx catalytic reaction showed kinetic controll. Since the decrease in the enzymes distance shortens the transport length of intermediate glucose to GOx, the amount of glucose reaching GOx will be increased in the unit time, and in turn, the enzyme cascade reaction yield will be increased with decreasing the gap distance. This phenomenon is similar to the intermediates pool of tricarboxylic acid (TCA) cycle in the metabolic system. This study promotes the understanding of the metabolic/signal transduction processes and active transport in biological systems and promises to design high performance biosensors and biofuel cells systems.

Controlled Fabrication of Functional Capsules Based on the Synergistic Interaction between Polyphenols and MOFs under Weak Basic Condition

Metal-organic coordination materials with controllable nanostructures are of widespread interest due to the coupled benefits of inorganic/organic building blocks and desired architectures. In this work, based on the finding of a synergistic interaction between metal-organic frameworks (MOFs) and natural polyphenols under weak basic condition, a facile strategy has been developed for directly fabricating diverse phenolic-inspired functional materials or metal-phenolic frameworks (MPFs) with controlled hollow nanostructures (polyhedral core-shell, rattle-like, hollow cage, etc.) and controllable size, morphology, and roughness, as well as composition. By further incorporating the diverse functionalities of polyphenols such as low toxicity and therapeutic properties, catalytic activity, and ability to serve as carbon precursors, into the novel assemblies, diverse artificially designed nanoarchitectures with target functionalities have been generated for an array of applications.

Engineering Systems with Spatially Separated Enzymes via Dual-Stimuli-Sensitive Properties of Microgels

This work examines the adsorption regime and the properties of microgel/enzyme thin films deposited onto conductive graphite-based substrates. The films were formed via two-step sequential adsorption. A temperature- and pH-sensitive poly(N-isopropylacrylamide)-co-(3-(N,N-dimethylamino)propylmethacrylamide) microgel (poly(NIPAM-co-DMAPMA microgel) was adsorbed first, followed by its interaction with the enzymes, choline oxidase (ChO), butyrylcholinesterase (BChE), or mixtures thereof. By temperature-induced stimulating both (i) poly(NIPAM-co-DMAPMA) microgel adsorption at T > VPTT followed by short washing and drying and then (ii) enzyme loading at T < VPTT, we can effectively control the amount of the microgel adsorbed on a hydrophobic interface as well as the amount and the spatial localization of the enzyme interacted with the microgel film. Depending on the biomolecule size, enzyme molecules can (in the case for ChO) or cannot (in the case for BChE) penetrate into the microgel interior and be localized inside/outside the microgel particles. Different spatial localization, however, does not affect the specific enzymatic responses of ChO or BChE and does not prevent cascade enzymatic reaction involving both BChE and ChO as well. This was shown by the methods of electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), and amperometric analysis of enzymatic responses of immobilized enzymes. Thus, a novel simple and fast strategy for physical entrapment of biomolecules by the polymeric matrix was proposed, which can be used for engineering systems with spatially separated enzymes of different types.

Compartmentalization of Incompatible Catalytic Transformations for Tandem Catalysis

In Nature, incompatible catalytic transformations are being carried out simultaneously through compartmentalization that allows for the combination of incompatible catalysts in tandem reactions. Herein, we take the compartmentalization concept to the synthetic realm and present an approach that allows two incompatible transition metal catalyzed transformations to proceed in one pot in tandem. The key is the site isolation of both catalysts through compartmentalization using a core-shell micellar support in an aqueous environment. The support is based on amphiphilic triblock copolymers of poly(2-oxazoline)s with orthogonal functional groups on the side chain that can be used to cross-link covalently the micelle and to conjugate two metal catalysts in different domains of the micelle. The micelle core and shell provide different microenvironments for the transformations: Co-catalyzed hydration of an alkyne proceeds in the hydrophobic core, while the Rh-catalyzed asymmetric transfer hydrogenation of the intermediate ketone into a chiral alcohol occurs in the hydrophilic shell.