Development of broad-spectrum antimicrobial latex paint surfaces employing active amphiphilic compounds

Quaternary Ammonium Salts-Based Materials: A Review on Environmental Toxicity, Anti-Fouling Mechanisms and Applications in Marine and Water Treatment Industries

The adherence of pathogenic microorganisms to surfaces and their association to form antibiotic-resistant biofilms threatens public health and affects several industrial sectors with significant economic losses. For this reason, the medical, pharmaceutical and materials science communities are exploring more effective anti-fouling approaches. This review focuses on the anti-fouling properties, structure-activity relationships and environmental toxicity of quaternary ammonium salts (QAS) and, as a subclass, ionic liquid compounds. Greener alternatives such as QAS-based antimicrobial polymers with biocide release, non-fouling (i.e., PEG, zwitterions), fouling release (i.e., poly(dimethylsiloxanes), fluorocarbon) and contact killing properties are highlighted. We also report on dual-functional polymers and stimuli-responsive materials. Given the economic and environmental impacts of biofilms in submerged surfaces, we emphasize the importance of less explored QAS-based anti-fouling approaches in the marine industry and in developing efficient membranes for water treatment systems.

Fluoride Removal Using Nanofiltration-Ranged Polyamide Thin-Film Nanocomposite Membrane Incorporated Titanium Oxide Nanosheets

Drinking water defluoridation has attracted significant attention in the scientific community, from which membrane technology, by exploring thin film nanocomposite (TFN) membranes, has demonstrated a great potential for treating fluoride-contaminated water. This study investigates the development of a TFN membrane by integrating titanium oxide nanosheets (TiO2 NSs) into the polyamide (PA) layer using interfacial polymerization. The characterization results suggest that successfully incorporating TiO2 NSs into the PA layer of the TFN membrane led to a surface with a high negative charge, hydrophilic properties, and a smooth surface at the nanoscale. The TFN membrane, containing 80 ppm of TiO2 NSs, demonstrated a notably high fluoride rejection rate of 98%. The Donnan-steric-pore-model-dielectric-exclusion model was employed to analyze the effect of embedding TiO2 NSs into the PA layer of TFN on membrane properties, including charge density (Xd), the pore radius (rp), and pore dielectric constant (εp). The results indicated that embedding TiO2 NSs increased Xd and decreased the εp by less than the TFC membrane without significantly affecting the rp. The resulting TFN membrane demonstrates promising potential for application in water treatment systems, providing an effective and sustainable solution for fluoride remediation in drinking water.

Quaternary Ammonium Salts: Insights into Synthesis and New Directions in Antibacterial Applications

The overuse of antibiotics has led to the emergence of a large number of antibiotic-resistant genes in bacteria, and increasing evidence indicates that a fungicide with an antibacterial mechanism different from that of antibiotics is needed. Quaternary ammonium salts (QASs) are a biparental substance with good antibacterial properties that kills bacteria through simple electrostatic adsorption and insertion into cell membranes/altering of cell membrane permeability. Therefore, the probability of bacteria developing drug resistance is greatly reduced. In this review, we focus on the synthesis and application of single-chain QASs, double-chain QASs, heterocyclic QASs, and gemini QASs (GQASs). Some possible structure-function relationships of QASs are also summarized. As such, we hope this review will provide insight for researchers to explore more applications of QASs in the field of antimicrobials with the aim of developing systems for clinical applications.

Lignin: A Sustainable Antiviral Coating Material

Transmission of viruses through contact with contaminated surfaces is an important pathway for the spread of infections. Antiviral surface coatings are useful to minimize such risks. Current state-of-the-art approaches toward antiviral surface coatings either involve metal-based materials or complex synthetic polymers. These approaches, however, even if successful, will have to face great challenges when it comes to large-scale applications and their environmental sustainability. Here, an antiviral surface coating was prepared by spin-coating lignin, a natural biomass residue of the paper production industry. We show effective inactivation of herpes simplex virus type 2 (>99% after 30 min) on a surface coating that is low-cost and environmentally sustainable. The antiviral mechanism of the lignin surface was investigated and is attributed to reactive oxygen species generated upon oxidation of lignin phenols. This mechanism does not consume the surface coating (as opposed to the release of a specific antiviral agent) and does not require regeneration. The coating is stable in ambient conditions, as demonstrated in a 6 month aging study that did not reveal any decrease in antiviral activity. This research suggests that natural compounds may be used for the development of affordable and sustainable antiviral coatings.

Antimicrobial polymeric composites for high-touch surfaces in healthcare applications

Antimicrobial polymer composites have long been utilized in the healthcare field as part of the first line of defense. These composites are desirable in that they pose a minimal risk of developing contagions with antibiotic resistance. For this reason, the field of antimicrobial composites has seen steady growth over recent years and is becoming increasingly important during the current COVID-19 pandemic. In this article, we first review the need of the antimicrobial polymers in high tough surfaces, the antimicrobial mechanism, and then the recent advances in the development of antimicrobial polymer composite including the utilization of intrinsic antimicrobial polymers, the addition of antimicrobial additives, and new exploration of surface patterning. While there are many established and developing methods of imbuing a material with antimicrobial activity, there currently is no standard quantification method for these properties leading to difficulty comparing the efficacy of these materials within the literature. A discussion of the common antimicrobial characterization methods is provided along with highlights on the need of a standardized quantification of antiviral and antibacterial properties in testing to allow ease of comparison between generated libraries and to facilitate proper screening. We also discuss and comment on the current trends of the development of antimicrobial polymer composites with long-lasting and specific antimicrobial activities, nontoxic properties, and environmental friendliness against a broad-spectrum of microbes.

Stimuli-responsive cyclodextrin-based supramolecular assemblies as drug carriers

Cyclodextrins (CDs) are widely employed in biomedical applications because of their unique structures. Various biomedical applications can be achieved in a spatiotemporally controlled manner by integrating the host-guest chemistry of CDs with stimuli-responsive functions. In this review, we summarize the recent advances in stimuli-responsive supramolecular assemblies based on the host-guest chemistry of CDs. The stimuli considered in this review include endogenous (pH, redox, and enzymes) and exogenous stimuli (light, temperature, and magnetic field). We mainly discuss the mechanisms of the stimuli-responsive ability and present typical designs of the corresponding supramolecular assemblies for drug delivery and other potential biomedical applications. The limitations and perspectives of CD-based stimuli-responsive supramolecular assemblies are discussed to further promote the translation of laboratory products into clinical applications.

Chemical design principles of next-generation antiviral surface coatings

The ongoing coronavirus disease 2019 (COVID-19) pandemic has accelerated efforts to develop high-performance antiviral surface coatings while highlighting the need to build a strong mechanistic understanding of the chemical design principles that underpin antiviral surface coatings. Herein, we critically summarize the latest efforts to develop antiviral surface coatings that exhibit virus-inactivating functions through disrupting lipid envelopes or protein capsids. Particular attention is focused on how cutting-edge advances in material science are being applied to engineer antiviral surface coatings with tailored molecular-level properties to inhibit membrane-enveloped and non-enveloped viruses. Key topics covered include surfaces functionalized with organic and inorganic compounds and nanoparticles to inhibit viruses, and self-cleaning surfaces that incorporate photocatalysts and triplet photosensitizers. Application examples to stop COVID-19 are also introduced and demonstrate how the integration of chemical design principles and advanced material fabrication strategies are leading to next-generation surface coatings that can help thwart viral pandemics and other infectious disease threats.

Synthesis and Biological Activity of Acrylate Copolymers Containing 3-Oxo-N-allyl-1,2-benzisothiazole-3(2H)-carboxamide Monomer as a Marine Antifouling Coating

A type of grafted acrylate copolymer resins, containing 3-oxo-N-allyl-1,2-benzisothiazole-2(3H)-carboxamide monomer and heterocyclic monomers, was synthesized through the copolymeri- zation of methyl methacrylate (MMA) and butyl acrylate (BA) with functional monomers. The structures of the monomers and copolymers were validated by infrared (IR) and 1 H nuclear magnetic resonance (NMR) spectroscopies. The inhibitory activities of the copolymers on algae, bacteria, and barnacle larvae were measured, and the antifouling potencies against marine macrofouling organisms were investigated. The results showed that the grafted resin had significant inhibitory effects on the growth of three marine algae (Isochrysis galbana, Nannochloropsisoculata, and Chlorella pyrenoidosa), and three bacteria (Vibrio coralliilyticus, Staphylococcus aureus,and Vibrio parahaemolyticus). The target copolymers also showed excellent inhibition of the survival of barnacle larvae. Additionally, the release rate of the antifoulant and the results of the marine field tests indicated that the grafted copolymers had outstanding antifouling potency against the attachment of marine macrofouling organisms.

Layer-By-Layer Nanocoating of Antiviral Polysaccharides on Surfaces to Prevent Coronavirus Infections

In 2020, the world is being ravaged by the coronavirus, SARS-CoV-2, which causes a severe respiratory disease, Covid-19. Hundreds of thousands of people have succumbed to the disease. Efforts at curing the disease are aimed at finding a vaccine and/or developing antiviral drugs. Despite these efforts, the WHO warned that the virus might never be eradicated. Countries around the world have instated non-pharmaceutical interventions such as social distancing and wearing of masks in public to curb the spreading of the disease. Antiviral polysaccharides provide the ideal opportunity to combat the pathogen via pharmacotherapeutic applications. However, a layer-by-layer nanocoating approach is also envisioned to coat surfaces to which humans are exposed that could harbor pathogenic coronaviruses. By coating masks, clothing, and work surfaces in wet markets among others, these antiviral polysaccharides can ensure passive prevention of the spreading of the virus. It poses a so-called "eradicate-in-place" measure against the virus. Antiviral polysaccharides also provide a green chemistry pathway to virus eradication since these molecules are primarily of biological origin and can be modified by minimal synthetic approaches. They are biocompatible as well as biodegradable. This surface passivation approach could provide a powerful measure against the spreading of coronaviruses.

Impacts of indoor surface finishes on bacterial viability

Microbes in indoor environments are constantly being exposed to antimicrobial surface finishes. Many are rendered non-viable after spending extended periods of time under low-moisture, low-nutrient surface conditions, regardless of whether those surfaces have been amended with antimicrobial chemicals. However, some microorganisms remain viable even after prolonged exposure to these hostile conditions. Work with specific model pathogens makes it difficult to draw general conclusions about how chemical and physical properties of surfaces affect microbes. Here, we explore the survival of a synthetic community of non-model microorganisms isolated from built environments following exposure to three chemically and physically distinct surface finishes. Our findings demonstrated the differences in bacterial survival associated with three chemically and physically distinct materials. Alkaline clay surfaces select for an alkaliphilic bacterium, Kocuria rosea, whereas acidic mold-resistant paint favors Bacillus timonensis, a Gram-negative spore-forming bacterium that also survives on antimicrobial surfaces after 24 hours of exposure. Additionally, antibiotic-resistant Pantoea allii did not exhibit prolonged retention on antimicrobial surfaces. Our controlled microcosm experiment integrates measurement of indoor chemistry and microbiology to elucidate the complex biochemical interactions that influence the indoor microbiome.

Colloidal Stability of Positively Charged Dispersions of Styrene and Acrylic Copolymers in the Presence of TiO2 and CaCO3

Increasing antibiotic resistance of several pathogenic microorganisms calls for alternative approaches to prevent spreading of bacterial diseases. We propose to employ for this purpose coatings obtained from positively charged latex dispersions. In this contribution we characterize aqueous mixed dispersions containing TiO2 or CaCO3 and methyl methacrylate-ethyl acrylate or styrene-ethyl acrylate copolymers synthesized using a cationic surfactant, cetyltrimethylammonium bromide as an emulsifier. Particle size, electrokinetic (ζ) potential of the mixed dispersions and the resulting thin films, as well as antimicrobial properties of the latter are described. The TiO2 and CaCO3 dispersions were stabilised with polyethyleneimine (PEI) and optimum pH for the mixed dispersions were chosen on the basis of ζ-potential measurements. For TiO2, the maximum ζ = +35 mV was found at pH 7.5, and for CaCO3, pH was set at 8.2 (ζ = +38 mV), to prevent its dissolution. In most 1:1 mixtures of TiO2 or CaCO3 with the cetyltrimethylammonium bromide (CTAB)-stabilised latex dispersions, two distinct particles populations were observed, corresponding to the bare latex and bare TiO2 or CaCO3 fractions. Films made of the mixed dispersions remained positively charged and showed antimicrobial activity similar or reduced with respect to the bare polymer films.

Synthesis, Characterization, and Aqueous Properties of an Amphiphilic Terpolymer with a Novel Nonionic Surfmer

A series of surfactive amphiphilic polymer PAADs were prepared from the copolymerization of sodium acrylate, dodecyl polyoxyethylene acrylate (DPA, a surfmer), and acrylamide under the action of a mixed initiating agent consisting of ammonium persulfate-sodium bisulfite/2,2′-azobis[2-(2-imidazolin-2-yl) propane] dihydrochloride. The aggregative behaviors of PAADs were explored by 13C nuclear magnetic resonance, a viscometer, and a surface tension instrument. It was found that the apparent viscosity and surface activity of PAADs were significantly improved by the increase of average sequence length of hydrophobic micro blocks, strong intermolecular hydrophobic association, or the formation of mixed micelles between hydrophobic micro blocks and micromolecular surface-active agent. The introduction of long-chain alkyls on molecular chains prolonged the average sequence length of hydrophobic micro blocks in molecular chains and enhanced the hydrophobic association between molecular chains and the tight arrangement of molecular chains on water surfaces, thereby increasing the surface activity. Moreover, the anionic monomer sodium acrylate on molecular chains, via electrostatic repulsion, promoted the conversion from intrachain association to intermolecular association and thereby facilitated the formation of dense interfacial films, enhancing the surface activity of water solutions. Then, the anion surfmer sodium dodecylbenzenesulfonate interacted with the hydrophobic micro blocks on the molecular chains to form mixed micelles, which accelerated the interchain association and enhanced the polymer surface activity. The novel polymeric micelle with higher viscosifying ability and surface activity was expected to be a promising oil drive agent for tertiary oil recovery.

Antimicrobial dispersions and films from positively charged styrene and acrylic copolymers

Antimicrobial properties of methyl methacrylate - ethyl acrylate and styrene - ethyl acrylate copolymers, both as latexes and after film formation were tested. The polymers were synthesized using a cationic surfactant, cetytrimethylammonium bromide (CTAB) as an emulsifier, in presence of either a cationic or an anionic initiator. The resulting latex particles showed sizes between 50 and 320 nm (larger for the anionic initiator), and ζ-potential between +30 and +70 mV (more positive for the cationic initiator). Dialysis did not change significantly the size distribution and ζ-potential of the latexes, and most of them inhibited growth of Gram-negative (E. coli), Gram-positive (S. aureus, B. subtilis) and yeast (C. albicans). On the other hand, only few compositions were effective against Gram-negative P. aeruginosa. Both completely ("dry") and incompletely ("wet") formed films produced from the respective latexes showed similar, although less pronounced antimicrobial activity pattern. The analysis of streaming potential for the films confirmed that part of the positive surface charge brought by non-covalent binding of CTAB to the polymer chains, is lost during dialysis of the latexes and during rinsing, especially under high-shear flow. From the practical point of view, films with the best mechanical and antimicrobial properties can be achieved using polymers with high proportion of ethyl acrylate, while nature of the co-monomer and initiator do not play crucial roles.

Host-Guest Self-Assembly Toward Reversible Thermoresponsive Switching for Bacteria Killing and Detachment

A facile method to construct reversible thermoresponsive switching for bacteria killing and detachment was currently developed by host-guest self-assembly of β-cyclodextrin (β-CD) and adamantane (Ad). Ad-terminated poly(N-isopropylacrylamide) (Ad-PNIPAM) and Ad-terminated poly[2-(methacryloyloxy)ethyl]trimethylammonium chloride (Ad-PMT) were synthesized via atom transfer radical polymerization, and then assembled onto the surface of β-CD grafted silicon wafer (SW-CD) by simply immersing SW-CD into a mixed solution of Ad-PNIPAM and Ad-PMT, thus forming a thermoresponsive surface (SW-PNIPAM/PMT). Atomic force microscopy (AFM), X-ray photoelectron spectrometry (XPS), and water contact angle (WCA) analysis were used to characterize the surface of SW-PNIPAM/PMT. The thermoresponsive bacteria killing and detachment switch of the SW-PNIPAM/PMT was investigated against Staphyloccocus aureus. The microbiological experiments confirmed the efficient bacteria killing and detachment switch across the lower critical solution temperature (LCST) of PNIPAM. Above the LCST, the Ad-PNIPAM chains on the SW-PNIPAM/PMT surface were collapsed to expose Ad-PMT chains, and then the exposed Ad-PMT would kill the attached bacteria. While below the LCST, the previously collapsed Ad-PNIPAM chains became more hydrophilic and swelled to cover the Ad-PMT chains, leading to the detachment of bacterial debris. Besides, the proposed method to fabricate stimuli-responsive surfaces with reversible switches for bacteria killing and detachment is facile and efficient, which creates a new route to extend the application of such smart surfaces in the fields requiring long-term antimicrobial treatment.

Chemical Synthesis and In Vitro Evaluation of a Phage Display-Derived Peptide Active against Infectious Salmon Anemia Virus

Infectious salmon anemia virus (ISAV) is the etiological agent of the disease by the same name and causes major losses in the salmon industry worldwide. Epizootic ISAV outbreaks have occurred in Norway and, to a lesser degree, in Canada. In 2007, an ISAV outbreak in Chile destroyed most of the seasonal production and endangered the entire Chilean salmon industry. None of the existing prophylactic approaches have demonstrated efficacy in providing absolute protection from or even a palliative effect on ISAV proliferation. Sanitary control measures for ISAV, based on molecular epidemiology data, have proven insufficient, mainly due to high salmon culture densities and a constant presence of a nonpathogenic strain of the virus. This report describes an alternative treatment approach based on interfering peptides selected from a phage display library. The screening of a phage display heptapeptide library resulted in the selection of a novel peptide with significant in vitro antiviral activity against ISAV. This peptide specifically interacted with the viral hemagglutinin-esterase protein, thereby impairing virus binding, with plaque reduction assays showing a significant reduction in viral yields. The identified peptide acts at micromolar concentrations against at least two different pathogenic strains of the virus, without detectable cytotoxic effects on the tested fish cells. Therefore, antiviral peptides represent a novel alternative for controlling ISAV and, potentially, other fish pathogens.

IMPORTANCE

Identifying novel methods for the efficient control of infectious diseases is imperative for the future of global aquaculture. The present study used a phage display heptapeptide library to identify a peptide with interfering activity against a key protein of the infectious salmon anemia virus (ISAV). A piscine orthomyxovirus, ISAV is a continuous threat to the commercial sustainability of cultured salmon production worldwide. The complex epidemiological strategy of this pathogen has made prophylactic control extremely difficult. The identified antiviral peptide efficiently impairs ISAV infection in vitro by specifically blocking hemagglutinin-esterase, a pivotal surface protein of this virus. Peptide synthesis could further modify the primary structure of the identified peptide to improve specific activity and stability. The present results form the foundation for developing a new pharmacological treatment against ISAV.

Photodynamic antimicrobial polymers for infection control

Hospital-acquired infections pose both a major risk to patient wellbeing and an economic burden on global healthcare systems, with the problem compounded by the emergence of multidrug resistant and biocide tolerant bacterial pathogens. Many inanimate surfaces can act as a reservoir for infection, and adequate disinfection is difficult to achieve and requires direct intervention. In this study we demonstrate the preparation and performance of materials with inherent photodynamic, surface-active, persistent antimicrobial properties through the incorporation of photosensitizers into high density poly(ethylene) (HDPE) using hot-melt extrusion, which require no external intervention except a source of visible light. Our aim is to prevent bacterial adherence to these surfaces and eliminate them as reservoirs of nosocomial pathogens, thus presenting a valuable advance in infection control. A two-layer system with one layer comprising photosensitizer-incorporated HDPE, and one layer comprising HDPE alone is also described to demonstrate the versatility of our approach. The photosensitizer-incorporated materials are capable of reducing the adherence of viable bacteria by up to 3.62 Log colony forming units (CFU) per square centimeter of material surface for methicillin resistant Staphylococcus aureus (MRSA), and by up to 1.51 Log CFU/cm² for Escherichia coli. Potential applications for the technology are in antimicrobial coatings for, or materials comprising objects, such as tubing, collection bags, handrails, finger-plates on hospital doors, or medical equipment found in the healthcare setting.

Convenient Preparation of Bactericidal Hydrogels by Covalent Attachment of Stabilized Antimicrobial Peptides Using Thiol-ene Click Chemistry

This report describes the design and synthesis of a bactericidal poly(ethylene glycol)-based (PEG) hydrogel coating with covalently attached antimicrobial peptides (AMP) stabilized against proteolytic degradation. As such, mimics of the highly active AMP HHC10 (H-KRWWKWIRW-NH₂) were designed for optimal stability in human serum while retaining strong antimicrobial activity against Staphylococcus aureus and Staphylococcus epidermidis, the major causative agents of biomaterial associated infection. In order to investigate the selectivity of the AMPs, their hemolytic activity was determined. A N-terminal cysteine facilitated thiol-ene chemistry for a fast, single-step immobilization/photopolymerization strategy. The antimicrobial activity of the resulting thin layer hydrogel coating on a PET surface was established using the Japanese Industrial Standard (JIS) Z2801 assay, showing complete killing (>99.9%) of inocula of S. aureus ATCC 49230, S. epidermidis ATCC 35984, and E. coli ATCC 8739.

Decontamination of chemical-warfare agent simulants by polymer surfaces doped with the singlet oxygen generator zinc octaphenoxyphthalocyanine

Using reactive singlet oxygen (1O2), the oxidation of chemical-warfare agent (CWA) simulants has been demonstrated. The zinc octaphenoxyphthalocyanine (ZnOPPc) complex was demonstrated to be an efficient photosensitizer for converting molecular oxygen (O2) to 1O2 using broad-spectrum light (450-800 nm) from a 250 W halogen lamp. This photosensitization produces 1O2 in solution as well as within polymer matrices. The oxidation of 1-naphthol to naphthoquinone was used to monitor the rate of 1O2 generation in the commercially available polymer film Hydrothane that incorporates ZnOPPc. Using electrospinning, nanofibers of ZnOPPc in Hydrothane and polycarbonate were formed and analyzed for their ability to oxidize demeton-S, a CWA simulant, on the surface of the polymers and were found to have similar reactivity as their corresponding films. The Hydrothane films were then used to oxidize CWA simulants malathion, 2-chloroethyl phenyl sulfide (CEPS), and 2-chloroethyl ethyl sulfide (CEES). Through this oxidation process, the CWA simulants are converted into less toxic compounds, thus decontaminating the surface using only O2 from the air and light.

Coatings capable of germinating and neutralizing Bacillus anthracis endospores

Endospores are formed by various bacterial families, including Bacillus and Clostridium, in response to environmental stresses as a means to survive conditions inhospitable to vegetative growth. Although metabolically inert, the endospore must interact with its environment to determine an optimal time to return to a vegetative state, a process known as germination. Germination has been shown to occur in response to a variety of chemical stimuli from specific nutrient germinants including amino acids, sugars and nucleosides. This process is known to be mediated primarily by the GerA family of spore-specific receptor proteins which initiates a signal transduction cascade that results in a return of oxidative metabolism in response to germinant receptor interactions. Herein, we report the development of a novel coating system capable of germinating B. anthracis endospores, followed by rapid killing of the vegetative bacteria by a novel incorporated amphiphilic biocide. The most effective formulation tested exhibited an ability to germinate and kill B. anthracis endospores and vegetative bacteria, respectively. The formulation reported resulted in a 90% reduction in as little as 5 min, and a 6 log reduction by 45 min.