Inkjet printing of sol-gel synthesized hydrated tungsten oxide nanoparticles for flexible electrochromic devices

Nonconventional Symmetric Double-Side Electrochromic Devices Employing a Nafion Conductive Layer to Unlock Superior Durability

In this work, we present a methodology to create an effective novel double-sided symmetric architecture of solid-state electrochromic devices. This principally new nonconventional configuration provides access to novel electrochromic systems that could be applicable for the creation of smart double-side signage, smart boards, nonemissive displays, and other smart interactive devices that change their color upon application of a voltage. The proposed configuration is based on the assembly of two identical electrochromic materials facing each other through an opaque optical separator. As a proof of concept, we use an electrochromic material based on bis(4'-(pyridin-4-yl)-2,2':6',2″-terpyridine) iron complex, covalently immobilized on screen-printed surface-extended ITO support. The symmetric configuration allows for a drastic enhancement of the overall stability of the device due to both attenuation of the counter electrode polarization and minimization of electrolyte decomposition. A nontransparent ion-permeable separator, in turn, allows observing the color change of only one of the electrodes by cutting off the optical contribution of the electrode located behind it. Further functionalization of the electrochromic material with a thin layer of Nafion is a beneficial strategy to significantly boost up long-term durability of the devices. Applying a layer of Nafion to the electrochromic material results in an increase in ionic conductivity within the device and ensures better retention of electrochromic molecules on the surface, thus minimizing device decomposition during long-term electrochemical cycling. An electrochromic device that bears Nafion-functionalized electrodes can operate (i) in the dual-side mode, where both sides demonstrate effective electrochromic performance; or (ii) in a one-side manner, where only one side of the device changes color. Notably, when operating in the one-side mode, the device withstands 70,000 cycles, after which the performance of the device can be resumed by simply turning the device to the other side (via switching the polarity of the electrodes).

Microextrusion Printing of Hierarchically Structured Thick V2O5 Film with Independent from Humidity Sensing Response to Benzene

The process of V₂O₅ oxide by the combination of sol-gel technique and hydrothermal treatment using heteroligand [VO(C₅H₇O₂)_2-x(C₄H₉O)_x] precursor was studied. Using thermal analysis, X-ray powder diffraction (XRD) and infra-red spectroscopy (IR), it was found that the resulting product was VO₂(B), which after calcining at 300 °C (1 h), oxidized to orthorhombic V₂O₅. Scanning electron microscopy (SEM) results for V₂O₅ powder showed that it consisted of nanosheets (~50 nm long and ~10 nm thick) assembled in slightly spherical hierarchic structures (diameter ~200 nm). VO₂ powder dispersion was used as functional ink for microextrusion printing of oxide film. After calcining the film at 300 °C (30 min), it was found that it oxidized to V₂O₅, with SEM and atomic force microscopy (AFM) results showing that the film structure retained the hierarchic structure of the powder. Using Kelvin probe force microscopy (KPFM), the work function value for V₂O₅ film in ambient conditions was calculated (4.81 eV), indicating a high amount of deficiencies in the sample. V₂O₅ film exhibited selective response upon sensing benzene, with response value invariable under changing humidity. Studies of the electrical conductivity of the film revealed increased resistance due to high film porosity, with conductivity activation energy being 0.26 eV.

From Traditional to Novel Printed Electrochromic Devices: Material, Structure and Device

Electrochromic materials have been considered as a new way to achieve energy savings in the building sector due to their potential applications in smart windows, cars, aircrafts, etc. However, the high cost of manufacturing ECDs using the conventional manufacturing methods has limited its commercialization. It is the advantages of low cost as well as resource saving, green environment protection, flexibility and large area production that make printing electronic technology fit for manufacturing electrochromic devices. This paper reviews the progress of research on printed electrochromic devices (ECDs), detailing the preparation of ECDs by screen printing, inkjet printing and 3D printing, using the scientific properties of discrete definition printing method. Up to now, screen printing holds the largest share in the electrochromic industry due to its low cost and large ink output nature, which makes it suitable especially for printing on large surfaces. Though inkjet printing has the advantages of high precision and the highest coloration efficiency (CE) can be up to 542 ± 10 cm²C^-1, it has developed smoothly, and has not shown rigid needs. Inkjet printing is suitable for the personalized printing production of high precision and small batch electronic devices. Since 3D printing is a new manufacturing technology in the 21st century, with the characteristics of integrated molding and being highly controllable, which make it suitable for customized printing of complex devices, such as all kinds of sensors, it has gained increasing attention in the past decade. Finally, the possibility of combining screen printing with inkjet printing to produce high performance ECDs is discussed.

Emerging Electrochromic Materials and Devices for Future Displays

With the rapid development of optoelectronic fields, electrochromic (EC) materials and devices have received remarkable attention and have shown attractive potential for use in emerging wearable and portable electronics, electronic papers/billboards, see-through displays, and other new-generation displays, due to the advantages of low power consumption, easy viewing, flexibility, stretchability, etc. Despite continuous progress in related fields, determining how to make electrochromics truly meet the requirements of mature displays (e.g., ideal overall performance) has been a long-term problem. Therefore, the commercialization of relevant high-quality products is still in its infancy. In this review, we will focus on the progress in emerging EC materials and devices for potential displays, including two mainstream EC display prototypes (segmented displays and pixel displays) and their commercial applications. Among these topics, the related materials/devices, EC performance, construction approaches, and processing techniques are comprehensively disscussed and reviewed. We also outline the current barriers with possible solutions and discuss the future of this field.

In Situ Exsolution Catalyst: An Innovative Approach to Develop Highly Selective and Sensitive Gas Sensors

The gas sensing characteristics of oxide semiconductors can be enhanced by loading noble metal or metal oxide catalysts. The uniform distribution of nanoscale catalysts with high thermal stability over the sensing materials is essential for sensors operating at elevated temperatures. An in situ exsolution process, which can be applied to catalysts, batteries, and sensors, provides a facile synthetic route for developing second-phase nanoparticles with uniform distribution, excellent thermochemical stability, and strong adhesion to the mother phase. In this study, we investigated the effect of Co-exsolved nanoparticles on the gas sensing characteristics of La_0.43Ca_0.37Co_0.06Ti_0.94O_3-d (LCCoT). The amount and size of the Co-exsolved nanoparticles on the surface of the perovskite mother phase were adjusted depending on the reduction temperature of the exsolution process. The LCCoT with Co-exsolved nanoparticles prepared by reduction at 700 °C exhibited a response (resistance ratio) of 116.3 to 5 ppm ethanol at 350 °C, which was 10-fold higher than the response of a sensor without exsolution. The high gas response was attributed to the catalytic effect promoted by the uniformly distributed Co-exsolved nanoparticles and the formation of p-n junctions on the sensing surface during reduction. Additionally, we demonstrated the catalytic effect of Co-exsolved nanoparticles using a proton transfer reaction-quadrupole mass spectrometer. By controlling the amount and distribution of exsolved nanoparticles on semiconductor chemiresistors, a new pathway for designing high-performance gas sensors with enhanced thermal stability can be achieved.

Temperature-Based Selective Detection of Hydrogen Sulfide and Ethanol with MoS2/WO3 Composite

A sensitive and temperature-based selective sensor toward hydrogen sulfide and ethanol using MoS₂/WO₃ composite as a sensing surface was developed in this work. The MoS₂/WO₃ nanocomposite was successfully obtained using a facile two-step method. Structural analysis revealed the successful formation of the composite. Further, the n-type semiconducting nature as revealed in the initial gas-sensing measurements was also confirmed via Mott-Schottky plots. The composite-based sensor showed preferential detection of ethanol (260 °C) and hydrogen sulfide (320 °C) by simply modulating the temperature of the sensor device. The device also displayed repeatability and long-term stability at respective operating temperatures. Improved sensitivity and selectivity are ascribed to synergistic effects arising from the formation of n-n type heterostructures. The present work indicates the potential use of composite-based heterojunctions to tune the sensing parameters and provide new possibilities to enhance the applications of MoS₂ and metal-oxide semiconductor-based composites.

A Brief Overview of Electrochromic Materials and Related Devices: A Nanostructured Materials Perspective

Exactly 50 years ago, the first article on electrochromism was published. Today electrochromic materials are highly popular in various devices. Interest in nanostructured electrochromic and nanocomposite organic/inorganic nanostructured electrochromic materials has increased in the last decade. These materials can enhance the electrochemical and electrochromic properties of devices related to them. This article describes electrochromic materials, proposes their classification and systematization for organic inorganic and nanostructured electrochromic materials, identifies their advantages and shortcomings, analyzes current tendencies in the development of nanomaterials used in electrochromic coatings (films) and their practical use in various optical devices for protection from light radiation, in particular, their use as light filters and light modulators for optoelectronic devices, as well as methods for their preparation. The modern technologies of “Smart Windows”, which are based on chromogenic materials and liquid crystals, are analyzed, and their advantages and disadvantages are also given. Various types of chromogenic materials are presented, examples of which include photochromic, thermochromic and gasochromic materials, as well as the main physical effects affecting changes in their optical properties. Additionally, this study describes electrochromic technologies based on WO₃ films prepared by different methods, such as electrochemical deposition, magnetron sputtering, spray pyrolysis, sol–gel, etc. An example of an electrochromic “Smart Window” based on WO₃ is shown in the article. A modern analysis of electrochromic devices based on nanostructured materials used in various applications is presented. The paper discusses the causes of internal and external size effects in the process of modifying WO₃ electrochromic films using nanomaterials, in particular, GO/rGO nanomaterials.

Cost-Effective, Flexible, and Colorful Dynamic Displays: Removing Underlying Conducting Layers from Polymer-Based Electrochromic Devices

Electrochromic (EC) materials and devices provide a user-controlled, dynamic way of displaying information using low power, making them interesting for a range of applications in numerous markets, including logistics, retail, consumer goods, and health care. To optimize the cost while simplifying the production, expanding the color space, and enhancing the contrast and vibrancy of EC displays aimed for cost-sensitive products, we sought to reduce the number of layers as well as remove the underlying conducting layer that accounts for a substantial fraction of the cost of a printed label. Here, we show how conjugated electrochromic polymers, which are inherently semiconducting, can be used to accomplish this goal and afford printable EC displays with a flexible form factor. Using a combination of electrochemical probes, in situ spectroscopy, solid-state conductivity, and in situ conductance measurements, we have studied and compared five different EC polymers with conductivities spanning multiple orders of magnitude and colors that span most of the visible range, identifying polymers and properties that allow for switching from the colored to the clear state without an underlying conducting layer. Finally, we incorporate these EC polymers into optimized flexible devices without an underlying conductor and demonstrate that they are able to provide on-demand, reversible colored-to-clear switching on the order of seconds to minutes, with operating voltages below ±1 V, optical memories exceeding 60 min, and a shelf-life exceeding 12 months.

Advances in Electrochemical Energy Devices Constructed with Tungsten Oxide-Based Nanomaterials

Tungsten oxide-based materials have drawn huge attention for their versatile uses to construct various energy storage devices. Particularly, their electrochromic devices and optically-changing devices are intensively studied in terms of energy-saving. Furthermore, based on close connections in the forms of device structure and working mechanisms between these two main applications, bifunctional devices of tungsten oxide-based materials with energy storage and optical change came into our view, and when solar cells are integrated, multifunctional devices are accessible. In this article, we have reviewed the latest developments of tungsten oxide-based nanostructured materials in various kinds of applications, and our focus falls on their energy-related uses, especially supercapacitors, lithium ion batteries, electrochromic devices, and their bifunctional and multifunctional devices. Additionally, other applications such as photochromic devices, sensors, and photocatalysts of tungsten oxide-based materials have also been mentioned. We hope this article can shed light on the related applications of tungsten oxide-based materials and inspire new possibilities for further uses.

Functional Metal Oxide Ink Systems for Drop-on-Demand Printed Thin-Film Transistors

Drop-on-demand printing is a noncontact direct patterning and rapid manufacturing printing technology which shows considerable potential in future display manufacturing. Metal oxides are an important kind of functional material in thin-film transistors, which are the core component of active matrix display technology, and thus printing a high-quality metal oxide functional layer is of great importance. In this feature article, we focused on the current progress in one of the foundations of drop-on-demand printing technology-the ink system. We explained the basic principles of a metal oxide ink system for printed electronics and summarized the applications of several kinds of ink systems in thin film transistor printing. Meanwhile, we also summed up problems that printed thin film transistors are facing as well as the corresponding solutions from the aspect of ink systems.

Remarkable Near-Infrared Electrochromism in Tungsten Oxide Driven by Interlayer Water-Induced Battery-to-Pseudocapacitor Transition

Near-infrared (NIR) electrochromism is of academic and technological interest for a variety of applications in advanced solar heat regulation, photodynamic therapy, optical telecommunications, and military camouflage. However, inorganic materials with outstanding NIR modulation capability are quite few. Herein, we propose a promising strategy for achieving strong NIR electrochromism in tungsten oxide that is closely related to its electrochemical transformation from battery-type behavior to pseudocapacitance, induced by introducing an interlayer space with water molecules within tungsten oxide. Further evidence demonstrates that the interlayer water molecules significantly reduced the energy barrier to ion diffusion and increased the ion flux in tungsten oxide. As a result, compared with anhydrous WO₃, the as-synthesized WO₃·2H₂O nanoplates exhibited remarkably improved NIR electrochromic properties, including a large transmittance modulation (90.4%), high coloration efficiency (322.6 cm² C^-1), and high cyclic stability (maintaining 93.7% after 500 cycles), which were comparable to those of the best reported NIR electrochromic materials. Moreover, the application of the WO₃·2H₂O nanoplate-based electrochromic device resulted in a temperature difference of 11.9 °C, indicating good solar thermal regulation ability.

Quasi-Solid-State Electrochromic Cells with Energy Storage Properties Made with Inkjet Printing

In common commercially available electrochromic glass panes, the active materials such as WO₃ and NiO_x films are typically deposited by either physical vapor or sputtering under vacuum. In the present studies, we report on the inkjet printing method to deposit both electrochromic and ion storage electrode layers under ambient conditions. An ion storage layer based on cerium modified TiO₂ and electrochromic nanocrystalline WO₃ were both prepared under the wet method and deposited as inks on conductive substrates. Both compounds possess porous morphology facilitating high ion diffusion during electrochemical processes. In particular, the ion storage layer was evaluated in terms of porosity, charge capacity and ion diffusion coefficient. A scaled up 90 cm² electrochromic device with quasi-solid-state electrolyte was made with the aforementioned materials and evaluated in terms of optical modulation in the visible region, cyclic voltammetry and color efficiency. High contrast between 13.2% and 71.6% for tinted and bleached states measured at 550 nm was monitored under low bias at +2.5 volt and −0.3 volts respectively. Moreover, the calculated energy density equal to 1.95 × 10⁻³ mWh cm⁻² and the high areal capacitance of 156.19 mF cm⁻² of the device could combine the electrochromic behavior of the cell with energy storage capability so as to be a promising candidate for future applications into smart buildings.

Voltage-Tunable Dual Image of Electrostatic Force-Assisted Dispensing Printed, Tungsten Trioxide-Based Electrochromic Devices with a Symmetric Configuration

Electrostatic force-assisted dispensing (EFAD)-printed tungsten trioxide (WO₃)-based electrochromic devices (ECDs) displaying a dual image depending on the applied voltage are demonstrated. We first print WO₃ via EFAD printing, in which the width of the printed lines can be tuned by adjusting the printing speed. The performance of the ECDs is characterized while varying the thickness of the printed WO₃ film. It is determined that ∼550 nm thick WO₃ is the optimal film considering maximum transmittance contrast (ΔT_max), device dynamic responses, efficiency, and long-term coloration/bleaching cyclic stability. More significantly, the coloration of the devices in this work can alternatively appear due to the use of electrolyte-soluble anodic species (here, dimethyl ferrocene, dmFc), for which WO₃ films should be deposited on both electrodes and a part of the electrodes should be exposed to the electrolyte for the oxidation of dmFc. To take advantage of such features of the devices, we successfully demonstrate EFAD-printed, flexible WO₃ ECDs alternately displaying a dual image, which is expected to have high potential as a functional component of printed electronics.

Green fabrication of a complementary electrochromic device using water-based ink containing nanoparticles of WO3 and Prussian blue

We fabricated a complementary electrochromic device (ECD) by using water-dispersible nanoparticles (NP) of Prussian blue (PB) and WO₃ by using a wet process, which involved just coating. Although the ECD had a thick WO₃ film, it showed much higher contrast compared to other techniques. In addition, the ECD also showed fast optical switching speed and high durability over 100 cycles because of wettability control of NP inks.

Recent advances and prospects of inkjet printing in heterogeneous catalysis

This review provides an insight into inkjet printing technology in the context of heterogeneous catalysis.

Electrodeposition of Ti-Doped Hierarchically Mesoporous Silica Microspheres/Tungsten Oxide Nanocrystallines Hybrid Films and Their Electrochromic Performance

In this paper, a novel Ti-doped hierarchically mesoporous silica microspheres/tungsten oxide (THMS/WO₃) hybrid film was prepared by simultaneous electrodeposition of Ti-doped hierarchically mesoporous silica microspheres (THMSs) and WO₃ nanocrystallines onto the fluoride doped tin dioxide (FTO) coated glass substrate. It is demonstrated that the incorporation of THMSs resulted in the hybrid film with improved electrochromic property. Besides, the content of THMSs plays an important role on the electrochromic property of the hybrid film. An excellent electrochromic THMS/WO₃ hybrid film with good optical modulation (52.00% at 700 nm), high coloration efficiency (88.84 cm² C⁻¹ at 700 nm), and superior cycling stability can be prepared by keeping the weight ratio of Na₂WO₄·2H₂O (precursor of WO₃):THMSs at 15:1. The outstanding electrochromic performances of the THMS/WO₃ hybrid film were mainly attributed to the porous structure, which facilitates the charge-transfer, promotes the electrolyte infiltration and alleviates the expansion of the film during Li⁺ insertion. This kind of porous THMS/WO₃ hybrid film is promising for a wide range of applications in smart homes, green buildings, airplanes, and automobiles.

Toward Simplified Electrochromic Devices Using Silver as Counter Electrode Material

Novel design of electrochromic devices (ECDs) known for their ability to modify optical properties under an applied voltage, based on a minimization of the number of layers is reported. The use of a metallic electrode, playing the role of both the conductive layer and the counter electrode, allows us to simplify the assembly of a commonly five-layer battery-type device to four-layer ECD. Further minimization of the number of layers is achieved using a conductive and electrochromic material. The novelty of the device configuration is illustrated using poly(3,4-ethylenedioxythiophene) (PEDOT)-based materials as EC layer, lithium-based ionic liquid as electrolyte, and Ag as counter electrode. Such a four- or three-layer ECD deposited on paper substrate switches from light to deep blue in a narrow 0.7 V voltage window. Preliminary investigations of the mechanism indicate traces of Ag on the PEDOT layer upon cycling. Finally, the printed ECD is successfully activated using a mobile phone.

Color Tuning by Oxide Addition in PEDOT:PSS-Based Electrochromic Devices

Poly(3,4-ethylenedi-oxythiophene) (PEDOT) derivatives conducting polymers are known for their great electrochromic (EC) properties offering a reversible blue switch under an applied voltage. Characterizations of symmetrical EC devices, built on combinations of PEDOT thin films, deposited with a bar coater from commercial inks, and separated by a lithium-based ionic membrane, show highest performance for 800 nm thickness. Tuning of the color is further achieved by mixing the PEDOT film with oxides. Taking, in particular, the example of optically inactive iron oxide Fe₂O₃, a dark blue to reddish switch, of which intensity depends on the oxide content, is reported. Careful evaluation of the chromaticity parameters L*, a*, and b*, with oxidizing/reducing potentials, evidences a possible monitoring of the bluish tint.

High-throughput micro-nanostructuring by microdroplet inkjet printing

The production of micrometer-sized structures comprised of nanoparticles in defined patterns and densities is highly important in many fields, ranging from nano-optics to biosensor technologies and biomaterials. A well-established method to fabricate quasi-hexagonal patterns of metal nanoparticles is block copolymer micelle nanolithography, which relies on the self-assembly of metal-loaded micelles on surfaces by a dip-coating or spin-coating process. Using this method, the spacing of the nanoparticles is controlled by the size of the micelles and by the coating conditions. Whereas block copolymer micelle nanolithography is a high-throughput method for generating well-ordered nanoparticle patterns at the nanoscale, so far it has been inefficient in generating a hierarchical overlay structure at the micrometer scale. Here, we show that by combining block copolymer micelle nanolithography with inkjet printing, hierarchical patterns of gold nanoparticles in the form of microstructures can be achieved in a high-throughput process. Inkjet printing was used to generate droplets of the micelle solution on surfaces, resulting in printed circles that contain patterns of gold nanoparticles with an interparticle spacing between 25 and 42 nm. We tested this method on different silicon and nickel-titanium surfaces and the generated patterns were found to depend on the material type and surface topography. Based on the presented strategy, we were able to achieve patterning times of a few seconds and produce quasi-hexagonal micro-nanopatterns of gold nanoparticles on smooth surfaces. Hence, this method is a high-throughput method that can be used to coat surfaces with nanoparticles in a user-defined pattern at the micrometer scale. As the nanoparticles provide a chemical contrast on the surface, they can be further functionalized and are therefore highly relevant for biological applications.

Inkjet printing and electrical characterisation of DNA-templated cadmium sulphide nanowires

Cadmium sulphide can be templated on λ-DNA molecules to form an aqueous dispersion of CdS/λ-DNA nanowires. Subsequent addition of ethylene glycol to 50% v/v is sufficient to formulate an ink suitable for printing using piezoelectric drop-on-demand technology. Printed droplet arrays show a coffee-ring morphology of individual deposits by fluorescence and Raman microscopy, but upon increasing the number of layers of printed material by repeated printing over each droplet, the dry deposit approaches closer to a disc shape. It is also possible to print parallel tracks by reducing the droplet separation in the array until neighbouring droplets overlap before they dry. The droplets coalesce to form a strip of width roughly equal to the diameter of the droplets. Evaporation-driven capillary flow sends the nanowires to the edges of the strip and when dry they form parallel tracks of CdS/λ-DNA nanowire bundles. Both droplets and tracks were printed onto Pt-on-glass interdigitated microelectrodes (10 μm width, 10 μm gap). The current-voltage characteristics of these two-terminal devices were approximately ohmic, but with some hysteresis. The conductance increased with temperature as a simple activated process with activation energies of 0.57 ± 0.02 eV (tracks) and 0.39 ± 0.02 eV (droplets). The impedance spectra of the printed films were consistent with hopping between CdS grains.

Flash-induced nanowelding of silver nanowire networks for transparent stretchable electrochromic devices

Electrochromic devices (ECDs) are emerging as a novel technology for various applications like commercialized smart window glasses, and auto-dimming rear-view mirrors. Recently, the development of low-power, lightweight, flexible, and stretchable devices has been accelerated to meet the growing demand in the new wearable devices market. Silver nanowires (AgNWs) can become new primary transparent conducting electrode (TCE) materials to replace indium tin oxide (ITO) for ECDs. However, issues such as substrate adhesion, delamination, and higher resistance still exist with AgNWs. Herein, we report a high-performance stretchable flash-induced AgNW-network-based TCE on surface-treated polydimethylsiloxane (PDMS) substrates. A Xe flash light method was used to create nanowelded networks of AgNWs. Surface silane treatments increased the adhesion and durability of the films as well. Finally, ECDs were fabricated under the optimal conditions and examined under strained conditions to demonstrate the resistance and mechanical behaviours of the devices. Results showed a flexible and durable film maintaining a high level of conductivity and reversible resistance behaviour, beyond those currently achievable with standard ITO/PET flexible TCEs.

Heat-Assisted Inkjet Printing of Tungsten Oxide for High-Performance Ultraviolet Photodetectors

An ammonium metatungstate precursor (WO₃Pr) ink was printed for tungsten oxide (WO₃) UV detectors on SiO₂/Si wafers with prefabricated Au electrodes. A systematic study was carried out on the printing parameters including substrate temperatures in the range of 22-80 °C, WO₃Pr molar concentrations of 0.01, 0.02, and 0.03 M, and printing scan numbers up to 7 to understand their effects on the resulted WO₃ film morphology and optoelectronic properties. It has been found that the printing parameters can sensitively affect the WO₃ film morphology, which in turn impacts the WO₃ photodetector performance. In particular, the printed films experienced a systematic change from discontinuous droplets at below 40 °C to continuous films at 40-60 °C of the substrate temperature. At higher temperatures, the excessive heat from the substrate not only caused drastic evaporation of the printed ink, resulting in highly nonuniform films, but also detrimental heating of the ink in the printer nozzle in proximity of the substrate, preventing continuous printing operation. An optimal printing window of the substrate temperature of 45-55 °C at a molar concentration of 0.02 M of ammonium metatungstate and three printing scans was obtained for the best UV detector performance. A large on/off ratio of 3538 and a high responsivity up to 2.70 A/W at 5 V bias (0.54 A/W·V) represent a significant improvement over the best report of ∼0.28 μA/W·V on WO_X photodetectors, which indicates that the printed WO₃ films are promising for various applications of optoelectronics and sensors.

Hybrid Copper-Nanowire-Reduced-Graphene-Oxide Coatings: A "Green Solution" Toward Highly Transparent, Highly Conductive, and Flexible Electrodes for (Opto)Electronics

This study reports a novel green chemistry approach to assemble copper-nanowires/reduced-graphene-oxide hybrid coatings onto inorganic and organic supports. Such films are robust and combine sheet resistances (<30 Ω sq^-1 ) and transparencies in the visible region (transmittance > 70%) that are rivalling those of indium-tin oxide. These electrodes are suitable for flexible electronic applications as they show a sheet resistance change of <4% after 10 000 bending cycles at a bending radius of 1.0 cm, when supported on polyethylene terephthalate foils. Significantly, the wet-chemistry method involves the preparation of dispersions in environmentally friendly solvents and avoids the use of harmful reagents. Such inks are processed at room temperature on a wide variety of surfaces by spray coating. As a proof-of-concept, this study demonstrates the successful use of such coatings as electrodes in high-performance electrochromic devices. The robustness of the electrodes is demonstrated by performing several tens of thousands of cycles of device operation. These unique conducting coatings hold potential for being exploited as transparent electrodes in numerous optoelectronic applications such as solar cells, light-emitting diodes, and displays.

Fabrication of MoS2/WO3 nanocomposite films for enhanced electro-chromic performance

A novel MoS₂ nanocomposite for electrochromic devices was synthesized, showing enhanced transmittance variation, colouration efficiency and switching times.

Inkjet printed nanomaterial based flexible radio frequency identification (RFID) tag sensors for the internet of nano things

The Internet of Things (IoT) has limitless possibilities for applications in the entire spectrum of our daily lives, from healthcare to automobiles to public safety.

Tungsten Oxide Materials for Optoelectronic Applications

Tungsten oxide is a versatile transition-metal oxide with a vast number of polymorphs and sub-stoichiometric compositions, featuring innate tunnels and oxygen vacancies. The structure-determined nature, such as altered optical absorption and metal-like conductivity, makes tungsten oxide an attractive candidate for optoelectronic applications. A brief summary of the recent progress in tungsten oxide for optoelectronic applications is provided, including not only the traditional field of electrochromism/photochromism, but also new areas of application, such as visible-light-driven photocatalysis, photothermal therapy, and surface enhanced Raman spectroscopy (SERS). Also, the prospects for future applications of tungsten oxide are summarized and highlighted.

Linear topology in amorphous metal oxide electrochromic networks obtained via low-temperature solution processing

Amorphous transition metal oxides are recognized as leading candidates for electrochromic window coatings that can dynamically modulate solar irradiation and improve building energy efficiency. However, their thin films are normally prepared by energy-intensive sputtering techniques or high-temperature solution methods, which increase manufacturing cost and complexity. Here, we report on a room-temperature solution process to fabricate electrochromic films of niobium oxide glass (NbO_x) and 'nanocrystal-in-glass' composites (that is, tin-doped indium oxide (ITO) nanocrystals embedded in NbO_x glass) via acid-catalysed condensation of polyniobate clusters. A combination of X-ray scattering and spectroscopic characterization with complementary simulations reveals that this strategy leads to a unique one-dimensional chain-like NbO_x structure, which significantly enhances the electrochromic performance, compared to a typical three-dimensional NbO_x network obtained from conventional high-temperature thermal processing. In addition, we show how self-assembled ITO-in-NbO_x composite films can be successfully integrated into high-performance flexible electrochromic devices.

Inkjet Printing of Functional Materials for Optical and Photonic Applications

Inkjet printing, traditionally used in graphics, has been widely investigated as a valuable tool in the preparation of functional surfaces and devices. This review focuses on the use of inkjet printing technology for the manufacturing of different optical elements and photonic devices. The presented overview mainly surveys work done in the fabrication of micro-optical components such as microlenses, waveguides and integrated lasers; the manufacturing of large area light emitting diodes displays, liquid crystal displays and solar cells; as well as the preparation of liquid crystal and colloidal crystal based photonic devices working as lasers or optical sensors. Special emphasis is placed on reviewing the materials employed as well as in the relevance of inkjet in the manufacturing of the different devices showing in each of the revised technologies, main achievements, applications and challenges.

Dual-Functional WO3 Nanocolumns with Broadband Antireflective and High-Performance Flexible Electrochromic Properties

The three-dimensional, high-porous, and oriented WO₃ nanocolumn film with broadband antireflective and high-performance flexible electrochromic dual-functionalities is achieved by utilizing a simple, one-step, room-temperature glancing angle deposition without any catalysts and templates. It is found that the WO₃ nanocolumn film is effective in increasing the optical transparency in the visible range, enhancing the color-switching response time as well as improving the mechanical flexibility and electrochemical cycling stability in comparison to dense WO₃ film. The further optical, morphological, and electrode reaction kinetics analyses reveal that these improvements can be attributed to its unique porous nanocolumn arrays, which reduce the refractive index, facilitate the interfacial charge-transfer and ion-penetration, and alleviate the internal stress of the film under the bending treatment. These results would provide a simple and effective guidance to design and construct low-cost, robust, flexible, stable, and transparent electrochromic smart windows.

Highly crystalline Ni/NiO hybrid electrodes processed by inkjet printing and laser-induced reductive sintering under ambient conditions

In this study, we perform drop-on-demand (DOD) inkjet printing and laser reductive sintering of precrystallized NiO nanoparticle (NP) ink under ambient conditions to obtain NiO/Ni hybrid electrode patterns on a highly localized area. By formulating an inkjet-printable and laser-reducible NiO NP ink, and by exploring the optimum conditions of inkjet printing parameters, we generate stable droplets, enabling arbitrary shapes of NiO NP dot arrays or line patterns to be deposited. Subsequent short-time low-temperature sintering produces highly crystalline NiO electrodes. Furthermore, laser reductive sintering applied on deposited NiO NP patterns can successfully realize a selective transformation of NiO into Ni electrodes under ambient conditions. Therefore, we can define either NiO or Ni electrodes, or a combination of the two on specific areas with precise amounts of ink. In addition, we identify the characteristics of the synthesized NPs, NP ink, NiO and Ni electrodes using various analytical methods.

Inkjet-printed all solid-state electrochromic devices based on NiO/WO3 nanoparticle complementary electrodes

Nanostructured thin films are important in the fields of energy conversion and storage. In particular, multi-layered nanostructured films play an important role as a part of the energy system for energy saving applications in buildings. Inkjet printing is a low-cost and attractive technology for patterning and deposition of multi-layered nanostructured materials on various substrates. However, it requires the development of a suitable ink formulation with optimum viscosity, surface tension and evaporation rate for various materials. In this study, a versatile ink formulation was successfully developed to prepare NiO and WO3 nanostructured films with strong adhesion to ITO coated glass using inkjet printing for energy saving electrochromic applications. We achieved a high performance electrochromic electrode, producing porous and continuous electrochromic films without aggregation. The NiO film with 9 printed layers exhibits an optical modulation of 64.2% at 550 nm and a coloration efficiency (CE) of 136.7 cm(2) C(-1). An inkjet-printed complementary all solid-state device was assembled, delivering a larger optical modulation of 75.4% at 633 nm and a higher CE of 131.9 cm(2) C(-1) among all solid-state devices. The enhanced contrast is due to the printed NiO film that not only performs as an ion storage layer, but also as a complementary electrochromic layer.

Facile preparation of aqueous suspensions of WO3/sulfonated PEDOT hybrid nanoparticles for electrochromic applications

An aqueous suspension of WO₃/PEDTS nanoparticles is facilely prepared, giving the hybrid electrochromic devices an enhanced optical contrast and electrochemical stability.

Printed Multicolor High-Contrast Electrochromic Devices

In this study, electrochemical responses of inkjet-printed multicolored electrochromic devices (ECD) were studied to evaluate the feasibility of presenting multiple colors in one ECD. Metallo-supramolecular polymers (MEPE) solutions with two primary colors were inkjet-printed on flexible electrodes. By digitally controlling print dosages of each species, the colors of the printed EC thin film patterns can be adjusted directly without premixing or synthesizing new materials. The printed EC thin films were then laminated with a solid transparent thin film electrolyte and a transparent conductive thin film to form an ECD. After applying a dc voltage, the printed ECDs exhibited great contrast with a transmittance change (ΔT) of 40.1% and a high coloration efficiency of 445 cm(2) C(-1) within a short darkening time of 2 s. The flexible ECDs also showed the same darkening time of 2 s and still had a high ΔT of 30.1% under bending condition. This study demonstrated the feasibility to fabricate display devices with different color setups by an all-solution process and can be further extended to other types of displays.

High performing smart electrochromic device based on honeycomb nanostructured h-WO3 thin films: hydrothermal assisted synthesis

Herein, we report honeycomb nanostructured single crystalline hexagonal WO(3) (h-WO(3)) thin films in order to improve electrochromic performance. In the present investigation, honeycomb nanostructured WO(3) with different unit size and nanowire array with highly nanocrystalline frameworks have been synthesized via a hydrothermal technique. The influence of hydrothermal reaction time on the honeycomb unit cells, crystallite size, lithium ion diffusion coefficient and switching time for coloration/bleaching were studied systematically. The electrochromic study reveals that the honeycomb unit cell size has a significant impact on the electrochromic performance. Small unit cells in the honeycomb lead to large optical modulation and fast switching response. A large optical modulation in the visible spectral region (60.74% at λ = 630 nm) at a potential of -1.2 V with fast switching time (4.29 s for coloration and 3.38 s for bleaching) and high coloration efficiency (87.23 cm(2) C(-1)) is observed in the honeycomb WO(3) thin films with a unit cell diameter of 1.7 μm. The variation in color on reduction of WO(3) with applied potential has been plotted on an xy-chromaticity diagram and the color space coordinate shows the transition from a colorless to deep blue state.

Bioinspired materials: from low to high dimensional structure

The surprising properties of biomaterials are the results of billions of years of evolution. Generally, biomaterials are assembled under mild conditions with very limited supply of constituents available for living organism, and their amazing properties largely result from the sophisticated hierarchical structures. Following the biomimetic principles to prepare manmade materials has drawn great research interests in materials science and engineering. In this review, we summarize the recent progress in fabricating bioinspired materials with the emphasis on mimicking the structure from one to three dimensions. Selected examples are described with a focus on the relationship between the structural characters and the corresponding functions. For one-dimensional materials, spider fibers, polar bear hair, multichannel plant roots and so on have been involved. Natural structure color and color shifting surfaces, and the antifouling, antireflective coatings of biomaterials are chosen as the typical examples of the two-dimensional biomimicking. The outstanding protection performance, and the stimuli responsive and self-healing functions of biomaterials based on the sophisticated hierarchical bulk structures are the emphases of the three-dimensional mimicking. Finally, a summary and outlook are given.

High-performance flexible electrochromic device based on facile semiconductor-to-metal transition realized by WO3·2H2O ultrathin nanosheets

Ultrathin nanosheets are considered as one kind of the most promising candidates for the fabrication of flexible electrochromic devices (ECDs) due to their permeable channels, high specific surface areas, and good contact with the substrate. Herein, we first report the synthesis of large-area nanosheets of tungsten oxide dihydrate (WO3·2H2O) with a thickness of only about 1.4 nm, showing much higher Li(+) diffusion coefficients than those of the bulk counterpart. The WO3·2H2O ultrathin nanosheets are successfully assembled into the electrode of flexible electrochromic device, which exhibits wide optical modulation, fast color-switching speed, high coloration efficiency, good cyclic stability and excellent flexibility. Moreover, the electrochromic mechanism of WO3·2H2O is further investigated by first-principle density functional theory (DFT) calculations, in which the relationship between structural features of ultrathin nanosheets and coloration/bleaching response speed is revealed.

Nanostructured electrochromic films by inkjet printing on large area and flexible transparent silver electrodes

Printed electrochromic flexible films were obtained by combining transparent silver grid electrodes formed by self-assembly and inkjet printed WO3 nanoparticles. Concentrated dispersions of WO3 nanoparticles were inkjet printed on transparent plastic silver grid electrodes with a high transparency of 83% in the spectral range of 400-800 nm, and a low sheet resistance in the range of 1-5 Ω sq(-1). These electrodes were used for electrochromic applications for the first time. The resultant patterned nanostructured electrochromic films maintained their coloring and bleaching performance after bending of the flexible films.

K-enriched WO3 nanobundles: high electrical conductivity and photocurrent with controlled polarity

Potassium ions are successfully intercalated into WO3 nanobundles with the integrity of the pseudo-orthorhombic structure remaining intact. The nanobundles display a 5-fold increase in the electrical conductivity. It changes from a value of 10(-4) Sm(-1) for pure WO3 to 40 Sm(-1) upon potassium intercalation. The electrical conductivity also increases by ~200 times as temperature increases from 23 to 200 °C whereby analysis shows a thermal activation energy of ~1 eV. Density functional theory calculations show that K ions cause the reduction of the surrounding W atoms and lead to an increase in the electron population in the conduction band. Hence, the conductivity of the K-WO3 nanobundles is greatly enhanced. The calculated band structure also shows a gap of 1 eV that is consistent with the measured thermal activation energy. Upon illumination of focused laser beam, individual and isolated nanobundle displays significant photon induced current (9 nA) without external bias at low laser power (2 mW); the amplitude and polarity of photocurrent could be controlled by location of laser spot.