Multiresponsive polymer conetworks capable of responding to changes in pH, temperature, and magnetic field: synthesis, characterization, and evaluation of their ability for controlled uptake and release of solutes

Simultaneous switching of two different CO2-switchable amines in the same solution

Most CO2-responsive systems operate by using a base in water that is expected to be mostly deprotonated when under an atmosphere of air and mostly protonated under an atmosphere of CO2. This concept has led to the development of many different CO2-responsive materials such as solvents, polymers, surfactants, and solutes. As CO2-responsive materials research continues, more complex systems may be developed, including systems containing two different bases with different basicities. Understanding the influence each base has on the protonation equilibrium of the other base is important for designing systems in which effective deprotonation and protonation occur. This article presents a model that can predict the solution pH and the % protonation of two different bases at various concentrations under air and CO2. Experimental data was collected to demonstrate the successful simultaneous switching of two amines and to evaluate the accuracy of the predictive model. The simultaneous switching of two different CO2-switchable amines in the same solution was determined to be possible but only if the amine concentrations and basicities are within certain ranges, and only if the pKaH values of the two bases differ by no more than 3 units.

Synergetic effects of thymoquinone-loaded porous PVPylated Fe3O4 nanostructures for efficient pH-dependent drug release and anticancer potential against triple-negative cancer cells

Porous iron oxide nanostructures have attracted increasing attention due to their potential biomedical applications as nanocarriers for cancer and many other therapies as well as minimal toxicity. Herbal anti-cancer agent thymoquinone loaded on Fe₃O₄ nanoparticles is envisaged to offer solution towards cancer treatment. The purpose of the present study was to investigate the efficacy of thymoquinone-loaded PVPylated Fe₃O₄ magnetic nanoparticles (TQ-PVP-Fe₃O₄ NPs) against triple-negative breast cancer (TNBC) cells. The porous PVPylated Fe₃O₄ NPs were prepared by a simple solvothermal process, whereas the thymoquinone drug was loaded via the nanoprecipitation method. Fourier transform infrared (FTIR) spectroscopic analysis confirmed the molecular drug loading, and surface morphological observation further confirmed this. The quantity of thymoquinone adsorbed onto the porous PVPylated Fe₃O₄ NPs was studied by thermogravimetric analysis (TGA). The positive surface charge of TQ-PVP-Fe₃O₄ NPs facilitates the interaction of the NPs with cancer (MDA-MB-231) cells to enhance the biological functions. In addition, the anticancer potential of NPs involving cytotoxicity, apoptosis induction, reactive oxygen species (ROS) generation, and changes in the mitochondrial membrane potential (ΔΨ _m) of TNBC cells was evaluated. TQ-PVP-Fe₃O₄ NP-treated cells effectively increased the ROS levels leading to cellular apoptosis. The study shows that the synthesized TQ-PVP-Fe₃O₄ NPs display pH-dependent drug release in the cellular environment to induce apoptosis-related cell death in TNBC cells. Hence, the prepared TQ-PVP-Fe₃O₄ NPs may be a suitable drug formulation for anticancer therapy.

Design Principles for Aqueous Interactive Materials: Lessons from Small Molecules and Stimuli-Responsive Systems

Interactive materials are at the forefront of current materials research with few examples in the literature. Researchers are inspired by nature to develop materials that can modulate and adapt their behavior in accordance with their surroundings. Stimuli-responsive systems have been developed over the past decades which, although often described as "smart," lack the ability to act autonomously. Nevertheless, these systems attract attention on account of the resultant materials' ability to change their properties in a predicable manner. These materials find application in a plethora of areas including drug delivery, artificial muscles, etc. Stimuli-responsive materials are serving as the precursors for next-generation interactive materials. Interest in these systems has resulted in a library of well-developed chemical motifs; however, there is a fundamental gap between stimuli-responsive and interactive materials. In this perspective, current state-of-the-art stimuli-responsive materials are outlined with a specific emphasis on aqueous macroscopic interactive materials. Compartmentalization, critical for achieving interactivity, relies on hydrophobic, hydrophilic, supramolecular, and ionic interactions, which are commonly present in aqueous systems and enable complex self-assembly processes. Relevant examples of aqueous interactive materials that do exist are given, and design principles to realize the next generation of materials with embedded autonomous function are suggested.

Magnetic Nanoparticle Systems for Nanomedicine—A Materials Science Perspective

Iron oxide nanoparticles are the basic components of the most promising magneto-responsive systems for nanomedicine, ranging from drug delivery and imaging to hyperthermia cancer treatment, as well as to rapid point-of-care diagnostic systems with magnetic nanoparticles. Advanced synthesis procedures of single- and multi-core iron-oxide nanoparticles with high magnetic moment and well-defined size and shape, being designed to simultaneously fulfill multiple biomedical functionalities, have been thoroughly evaluated. The review summarizes recent results in manufacturing novel magnetic nanoparticle systems, as well as the use of proper characterization methods that are relevant to the magneto-responsive nature, size range, surface chemistry, structuring behavior, and exploitation conditions of magnetic nanosystems. These refer to particle size, size distribution and aggregation characteristics, zeta potential/surface charge, surface coating, functionalization and catalytic activity, morphology (shape, surface area, surface topology, crystallinity), solubility and stability (e.g., solubility in biological fluids, stability on storage), as well as to DC and AC magnetic properties, particle agglomerates formation, and flow behavior under applied magnetic field (magnetorheology).

Artificial Microbial Arenas: Materials for Observing and Manipulating Microbial Consortia

From the smallest ecological niche to global scale, communities of microbial life present a major factor in system regulation and stability. As long as laboratory studies remain restricted to single or few species assemblies, however, very little is known about the interaction patterns and exogenous factors controlling the dynamics of natural microbial communities. In combination with microfluidic technologies, progress in the manufacture of functional and stimuli-responsive materials makes artificial microbial arenas accessible. As habitats for natural or multispecies synthetic consortia, they are expected to not only enable detailed investigations, but also the training and the directed evolution of microbial communities in states of balance and disturbance, or under the effects of modulated stimuli and spontaneous response triggers. Here, a perspective on how materials research will play an essential role in generating answers to the most pertinent questions of microbial engineering is presented, and the concept of adaptive microbial arenas and possibilities for their construction from particulate microniches to 3D habitats is introduced. Materials as active and tunable components at the interface of living and nonliving matter offer exciting opportunities in this field. Beyond forming the physical horizon for microbial cultivates, they will enable dedicated intervention, training, and observation of microbial consortia.

Catalytic activities of heterogeneous catalysts obtained by copolymerization of metal-containing 2-(acetoacetoxy)ethyl methacrylate

Among the synthetic strategies commonly used for supporting a metal complex onto an organic polymer in order to obtain an heterogenous catalyst, a valid choice is to synthesize a metal containing monomer (MCM), which can subsequently be subjected to polymerization with suitable comonomers and crosslinkers, achieving a supported transition metal catalyst as a metal-containing polymer (MCP). In this context, during the last two decades, we explored the use of 2-(acetoacetoxy)ethyl methacrylate (HAAEMA) as a ligand to prepare several MCMs for the relevant MCPs. In this review we summarize and discuss our developments in the studies of the catalytic activity of these “hybrid” catalysts. These catalysts have demonstrated high efficiency and/or excellent selectivity in several kinds of chemical reactions and very often they could be recovered and reused in multiple cycles maintaining their activity and selectivity without suffering from appreciable metal leaching.

Dual-responsive biocompatible microgels as high loaded cargo: understanding of encapsulation/release driving forces by NMR NOESY

The suitability of biocompatible microgels as a new cosmetic carrier has been demonstrated through their ability of encapsulation/release of cosmetic active molecules.

Synthesis and drug release profile of a dual-responsive poly(ethylene glycol) hydrogel nanocomposite

This work describes the synthesis, characterization and application of a pH- and magnetic-responsive PEG hydrogel (HG) nanocomposite as a platform for drug delivery.

Influence of Surface Treatment on Magnetic Properties of Fe3O4 Nanoparticles Synthesized by Electrochemical Method

The changes of magnetic properties in magnetite nanoparticles during two different stabilization processes were investigated. Magnetic nanoparticles (MNPs) were obtained by electrochemical synthesis from two kinds of salts: (CH3)4NCl and NaCl. After that, two methods-steric and electrostatic-were used to stabilize MNPs with oleic acid (OA) and sodium hydroxide (NaOH), respectively. As a consequence, aqueous and organic dispersions were obtained after surface modification. The coated nanoparticles were characterized by TEM, zeta potential, thermogravimetry analysis (TGA), cyclic voltammetry (CV), magnetization measurements, and infrared and Mössbauer spectroscopy. The results showed that the particles were between 8 and 13 nm in size. In addition, the MNPs were coated with negative charge layers from NaOH by physisorption and coated with carboxylate groups from OA by the chemisorption process, and hence, they exhibited different reactivity and behavior depending on the nature of the electrolyte used in the electrochemical synthesis. Furthermore, the uncoated and coated MNPs had a narrow size distribution. Additionally, the saturation magnetization values showed dependence on the magnetite synthesis conditions and surface modifiers.

Smart Macroporous IPN Hydrogels Responsive to pH, Temperature, and Ionic Strength: Synthesis, Characterization, and Evaluation of Controlled Release of Drugs

Fast responsive macroporous interpenetrating polymer network (IPN) hydrogels were fabricated in this work by a sequential strategy, as follows: the first network, consisting of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEM) cross-linked with N,N'-methylenebisacrylamide (BAAm), was prepared at -18 °C, the second network consisting of poly(acrylamide) (PAAm) cross-linked with BAAm, being also generated by cryogelation technique. Both single network cryogels (SNC) and IPN cryogels were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and water uptake. The presence of weak polycation PDMAEM endows the SNCs and the IPNs cryogels with sensitivity at numerous external stimuli such as pH, temperature, ionic strength, electric field, among which the first three were investigated in this work. It was found that the initial concentration of monomers in both networks was the key factor in tailoring the properties of IPN cryogels such as swelling kinetics, equilibrium water content (EWC), phase transition temperature and the response at ionic strength. The pore size increased after the formation of the second network, the swelling kinetics in pure water being comparable with that of the SNC, phase transition temperature being situated in the range 35-36 °C for IPN cryogels. The water uptake at equilibrium (WUeq) abruptly increased at pH < 3.0 in the case of SNCs, whereas the response of IPN cryogels at the decrease of pH from 6.0 to 1.0 was strongly dependent on the gel structure, the values of WUeq being lower at a higher concentration of DMAEM in the first network, the monomer concentration in the second network being about 10 wt %. The pH response was very much diminished when the monomer concentration was high in both networks (15 wt % in the first network, and 21 wt % in the second network). The increase of the ionic strength from 0 up to 0.3 M NaCl led to the decrease of the WUeq, for all cryogels, the level of dehydration being higher and faster for the SNC than for the corresponding IPN cryogel. The release of diclofenac sodium (DS), as a model acidic drug, triggered by pH, temperature, and ionic strength from the IPN cryogels was evaluated. A pulsatile release of DS from the IPN cryogels was presented, with a slower release at 34 °C (below VPTT) and a faster release at 37 and 40 °C (above the VPTT).

Effect of Polyethylene Glycol on Properties and Drug Encapsulation-Release Performance of Biodegradable/Cytocompatible Agarose-Polyethylene Glycol-Polycaprolactone Amphiphilic Co-Network Gels

We synthesized agarose-polycaprolactone (Agr-PCL) bicomponent and Agr-polyethylene glycol-PCL (Agr-PEG-PCL) tricomponent amphiphilic co-network (APCN) gels by the sequential nucleophilic substitution reaction between amine-functionalized Agr and activated halide terminated PCL or PCL-b-PEG-b-PCL copolymer for the sustained and localized delivery of hydrophilic and hydrophobic drugs. The biodegradability of the APCNs was confirmed using lipase and by hydrolytic degradation. These APCN gels displayed good cytocompatibility and blood compatibility. Importantly, these APCN gels exhibited remarkably high drug loading capacity coupled with sustained and triggered release of both hydrophilic and hydrophobic drugs. PEG in the APCNs lowered the degree of phase separation and enhanced the mechanical property of the APCN gels. The drug loading capacity and the release kinetics were also strongly influenced by the presence of PEG, the nature of release medium, and the nature of the drug. Particularly, PEG in the APCN gels significantly enhanced the 5-fluorouracil loading capacity and lowered its release rate and burst release. Release kinetics of highly water-soluble gemcitabine hydrochloride and hydrophobic prednisolone acetate depended on the extent of water swelling of the APCN gels. Cytocompatibility/blood compatibility and pH and enzyme-triggered degradation together with sustained release of drugs show great promise for the use of these APCN gels in localized drug delivery and tissue engineering applications.

Microfluidically fabricated pH-responsive anionic amphiphilic microgels for drug release

Novel amphiphilic microgels with hydrophobic and hydrophilic monomer units on the polymer chains were fabricated with an on-chip polymerisation methodology using a novel chip design.

pH sensitive amphiphilic conetworks based on end-group cross-linking of polydimethylsiloxane pentablock copolymer and polymethylhydrosiloxane

A series of pH-responsive amphiphilic conetworks were synthesized through cross-linking of well-defined amphiphilic pentablock copolymers via atom transfer radical polymerization.

Tailoring pH-responsive acrylic acid microgels with hydrophobic crosslinks for drug release

Amphiphilic microgels that were able to encapsulate and release both hydrophobic and hydrophilic moieties were fabricated via a new methodology using a lab-on-a-chip device.

"Near perfect" amphiphilic conetwork based on end-group cross-linking of polydimethylsiloxane triblock copolymer via atom transfer radical polymerization

Novel amphiphilic conetworks (APCNs) with uniform channel size were synthesized through end-cross-linking of well-defined amphiphilic triblock copolymers via atom transfer radical polymerization (ATRP). A new ditelechelic polydimethylsiloxane macroinitiator was synthesized to initiate the polymerization of N,N-dimethylacrylamide. The resulting triblock copolymers show well-defined molecular weight with narrow polydisperisty, which are telechelic modified by allylamine and fully cross-linked with polyhydrosiloxanes through hydrosilylation. Transmission electron microscopy shows that the APCN has the behavior of microphase separation with small channel size and uniform phase domain. The resulting APCNs with idealized microstructure exhibit a combination of excellent properties, i.e., superhigh mechanical strength (4 ± 1 MPa) and elongation ratio (175 ± 25%), outstanding oxygen permeability (350 ± 150 barrers), a high water uptake property, and excellent biocompatibility, indicating that in this way, "near perfect" networks are obtained. These results are better than those reported in the literature, suggesting a promising semipermeable barrier for islet encapsulation in relative biomaterial fields.

Polymer-based stimuli-responsive nanosystems for biomedical applications

The application of organic polymers and inorganic/organic hybrid systems in numerous fields of biotechnology has seen a considerable growth in recent years. Typically, organic polymers with diverse structures, compositional variations and differing molecular weights have been utilized to assemble polymeric nanosystems such as polymeric micelles, polymersomes, and nanohydrogels with unique features and structural properties. The architecture of these polymeric nanosystems involves the use of both hydrophobic and hydrophilic polymeric blocks, making them suitable as vehicles for diagnostic and therapeutic applications. Recently, "smart" or "intelligent" polymers have attracted significant attention in the biomedical field wherein careful introduction of specific polymeric modalities changes a banal polymeric nanosystem to an advanced stimuli-responsive nanosystem capable of performing extraordinary functions in response to an internal or external trigger such as pH, temperature, redox, enzymes, light, magnetic, or ultrasound. Further, incorporation of inorganic nanoparticles such as gold, silica, or iron oxide with surface-bound stimuli-responsive polymers offers additional advantages and multifunctionality in the field of nanomedicine. This review covers the physical properties and applications of both organic and organic/inorganic hybrid nanosystems with specific recent breakthroughs in drug delivery, imaging, tissue engineering, and separations and provides a brief discussion on the future direction.