Attogram detection of picric acid by hexa-peri-hexabenzocoronene-based chemosensors by controlled aggregation-induced emission enhancement

A Metal-Free Triazacoronene-Based Bimodal VOC Sensor

Developing suitable sensors for selective and sensitive detection of volatile organic compounds (VOCs) is crucial for monitoring indoor and outdoor air quality. VOCs are very harmful to our health upon inhalation or contact. Bimodal sensor materials with more than one transduction capability (optical and electrical) offer the ability to extract complementary information from the individual analyte, thus improving detection accuracy and performance. The privilege of manipulating the optoelectronic properties of the polycyclic aromatic hydrocarbon-based semiconducting materials offers rapid signal transduction in multimodal sensing applications. A thiophene-functionalized triazacoronene (TTAC) donor-acceptor-donor (D-A-D) type sensor is reported here for VOC sensing. The single-crystal X-ray structure analysis of the TTAC revealed that a distinctive supramolecular polymer architecture was formed because of cooperative π-π and intermolecular D-A interactions and exhibited rapid signal transduction upon exposure to specific VOCs. The TTAC-embedded green luminescent paper-based test strip exhibited an on-off fluorescence response upon nitrobenzene vapor exposure for 120 s. The selective and rapid response is due to the fast photoinduced electron transfer, as is evident from the time-resolved excited-state dynamics and density functional theory studies. The thick-film-based prototype chemiresistive sensor detects harmful VOCs in a custom-made gas sensing system including benzene, toluene, and nitrobenzene. The TTAC sensor rapidly responds (200 s) at relatively low temperatures (180 οC) compared to other reported metal-oxide-based sensors.

Applications of supramolecular assemblies in drug delivery and photodynamic therapy

One of the world's serious health challenges is cancer. Anti-cancer agents delivered to normal cells and tissues pose several problems and challenges. In this connection, photodynamic therapy (PDT) is a minimally invasive therapeutic technique used for selectively destroying malignant cells while sparing the normal tissues. Development in photosensitisers (PSs) and light sources have to be made for PDT as a first option treatment for patients. In the pursuit of developing new attractive molecules and their formulations for PDT, researchers are working on developing such type of PSs that perform better than those being currently used. For the widespread clinical utilization of PDT, effective PSs are of particular importance. Host-guest interactions based on nanographene assemblies such as functionalized hexa-cata-hexabenzocoronenes, hexa-peri-hexabenzocoronenes and coronene have attracted increasing attention owing to less complicated synthetic steps and purification processes (gel permeation chromatography) during fabrication. Noncovalent interactions provide easy and facile approaches for building supramolecular PSs and enable them to have sensitive and controllable photoactivities, which are important for maximizing photodynamic effects and minimizing side effects. Various versatile supramolecular assemblies based on cyclodextrins, cucurbiturils, calixarenes, porphyrins and pillararenes have been designed in order to make PDT an effective therapeutic technique for curing cancer and tumours. The supramolecular assemblies of porphyrins display efficient electron transfer and fluorescence for use in bioimaging and PDT. The multifunctionalization of supramolecular assemblies is used for designing biomedically active PSs, which are helpful in PDT. It is anticipated that the development of these functionalized supramolecular assemblies will provide more fascinating advances in PDT and will dramatically expand the potential and possibilities in cancer treatments.

Emissive Click Cages

This study reports the synthesis of cofacial organic cage molecules containing aggregation-induced emissive (AIE) luminogens (AIEgens) through four-fold Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) "click" reactions. The shorter AIEgen, tetraphenylethylene (TPE), afforded two orientational isomers (TPE-CC-1A and TPE-CC-1B). The longer AIEgen, tetrabiphenylethylene (TBPE), afforded a single isomer (TBPE-CC-2). The click reaction employed is irreversible, yet it yielded remarkable four-fold click products above 40 %. The phenyl rings around the ethylene core generate propeller-shaped chirality owing to their orientation, which influences the chirality of the resulting cages. The shorter cages are a mixture of PP/MM isomers, while the longer ones are a mixture of PM/MP isomers, as evidenced by their x-ray structures. The newly synthesized cage molecules are emissive even in dilute solutions (THF) and exhibit enhanced AIE upon the addition of water. The aggregated cage molecules in aqueous solution exhibit turn-off emission sensing of nitroaromatic explosives, with selectivity to picric acid in the 25-38 nanomolar detection range.

Tetraphenylethene-Based Cross-Linked Conjugated Polymer Nanoparticles for Efficient Detection of 2,4,6-Trinitrophenol in Aqueous Phase

The cross-linked conjugated polymer poly(tetraphenylethene-co-biphenyl) (PTPEBP) nanoparticles were prepared by Suzuki-miniemulsion polymerization. The structure, morphology, and pore characteristics of PTPEBP nanoparticles were characterized by FTIR, NMR, SEM, and nitrogen adsorption and desorption measurements. PTPEBP presents a spherical nanoparticle morphology with a particle size of 56 nm; the specific surface area is 69.1 m2/g, and the distribution of the pore size is centered at about 2.5 nm. Due to the introduction of the tetraphenylethene unit, the fluorescence quantum yield of the PTPEBP nanoparticles reaches 8.14% in aqueous dispersion. Combining the porosity and nanoparticle morphology, the fluorescence sensing detection toward nitroaromatic explosives in the pure aqueous phase has been realized. The Stern-Volmer quenching constant for 2,4,6-trinitrophenol (TNP) detection is 2.50 × 104 M-1, the limit of detection is 1.07 μM, and the limit of quantification is 3.57 μM. Importantly, the detection effect of PTPEBP nanoparticles toward TNP did not change significantly after adding other nitroaromatic compounds, indicating that the anti-interference and selectivity for TNP detection in aqueous media is remarkable. In addition, the spike recovery test demonstrates the potential of PTPEBP nanoparticles for detecting TNP in natural environmental water samples.

In-situ generation of fluorescent silica nano-aggregates of silatranyl appended furfural Schiff base and its application to the spectrofluorimetric analysis of phenolic brominated flame retardants in aqueous medium

A silatranyl appended furfural Schiff base (Silt-FUR) has been synthesized and characterized by spectroscopic techniques, elemental analysis and mass spectrometry. The dissolution of Silt-FUR in methanol-water (90:10 v/v) results in the formation of fluorescent nano-aggregates due to the hydrolysis of the silatranyl ring. The formation of nano-aggregates has been confirmed by dynamic light scattering, scanning electron microscopy and transmission electron microscopy. The nano-aggregates exhibit quenching of fluorescence in the presence of phenolic brominated flame retardants such as 3,3',5,5'-tetrabromobisphenol A, 2,4-dibromophenol, 2,4,6-tribromophenol, and pentabromophenol. Density-Functional Theory and NMR titration suggest that acid-base pair formation between azomethinic functionality and flame retardants is the main cause of quenching of fluorescent signal as it causes photoinduced electron transfer. Due to the excellent spectrofluorimetric response of Silt-FUR nano-aggregates to detect brominated phenols, a spectrofluorimetric method has been standardized for the quantification of brominated flame retardants. The detection limit for pentabromophenol obtained is 0.432 µM under optimal experimental conditions, and the linear range of the determination is 0.0495-1.35 µM. Thus, the in-situ generation of nano-aggregates offers a user-friendly method for the detection, quantification and extraction of the brominated phenols with exceptionally high sensitivity and selectivity for pentabromophenol.

ESIPT Active Assemblies for 'On-On' Detection, Cell Imaging and Hampering Cellular Activity of 2, 6-dichloro-4-nitroaniline

NIR-emissive ESIPT active PBI-keto/enol assemblies have been developed for the detection of 2, 6-dichloro-4-nitroaniline (DCN). These assemblies show 'on-on' optical response towards DCN due to combined ESIPT-AIEE phenomenon with a detection limit of 1.65 nM. The potential of PBI-keto/enol assemblies to detect DCN has also been explored in grapes juice/grape residue, and soil for six consecutive days. Further, the biological applications of PBI-keto/enol assemblies to detect DCN in blood serum and to image DCN in live cells and to restrict the DCN induced cell death has been demonstrated in MG-63 cell lines.

A New Compound for Sequential Sensing of Picric Acid and Aliphatic Amines: Physicochemical Details and Construction of Molecular Logic Gates

Picric acid (PA) at low concentration is a serious water pollutant. Alongside, aliphatic amines (AAs) add to the queue to pollute surface water. Plenty of reports are available to sense PA with an ultralow limit of detection (LOD). However, only a handful of works are testified to detect AAs. A new fluorescent donor-acceptor compound has been synthesized with inherent intramolecular charge transfer (ICT) character that enables selective and sensitive colorimetric quantitative detection of PA and AAs with low LODs in non-aqueous as well as aqueous solutions. The synthesized compound is based on a hemicyanine skeleton containing two pyridenylmethylamino groups at the donor and a benzothiazole moiety at the acceptor ends. The detailed mechanisms and reaction dynamics are explained spectroscopically along with computational support. The fluorescence property of the detecting compound changes due to protonation of its pyridinyl centers by PA leading to quenching of fluorescence and subsequently de-protonation by AAs to revive the signal. We have further designed logic circuits from the acquired optical responses by sequential interactions.

High dual-state blue emission of a functionalized pyrazoline derivative for picric acid detection

High dual-state blue emission of a functionalized pyrazoline derivative for picric acid detection.

An ESIPT based versatile fluorescent probe for bioimaging live-cells and E. coli under strongly acidic conditions

A BTNN probe undergoes a 146 times increase in fluorescence intensity at 530 nm on lowering the pH from 7.0 to 2.0 and has been deployed for the bioimaging of MG-63 live cells and E. coli bacteria at different pH levels.

'Light-Up' AIE-Active Materials: Self-Assembly, Molecular Recognition and Catalytic Applications

Aggregation induced emission enhancement (AIEE) is one of the most widely explored phenomena to develop 'light up' (fluorescent) materials having potential applications in the field of supramolecular chemistry, analytical chemistry and material chemistry. By applying the principles of host-guest chemistry, we have developed a variety of aggregation induced emission (AIE/AEE) active materials having specific affinity for metal ions, electron deficient/electron rich analytes. The interactions between AIE active assemblies and metal ions are further tuned to prepare nanohybrids having potential applications as catalytic/photocatalytic systems in various organic transformations under eco-friendly conditions. This account summarizes various design strategies developed in our labortary for the preparation of AIE/AEE active building blocks having sensing and catalytic applications.

Selective determination of 2,4,6-trinitrophenol by using a novel carbon nanoparticles as a fluorescent probe in real sample

2,4,6-Trinitrophenol (TNP) is widely used in our daily life; however, excessive use of TNP can lead to a large number of diseases. Therefore, it is necessary to find an effective method to detect TNP. Herein, the rapid fluorescence quenching by TNP was developed for the fluorometric determination of TNP in aqueous medium based on the internal filter effect. Nitrogen-sulfur-codoped carbon nanoparticles (N,S-CNPs), synthesized by a one-pot solvothermal method with the precursors of L-cysteine and citric acid, were applied for the determination of TNP as a fluorescent probe. The excitation peak center of N,S-CNPs and the emission peak center are 340 nm and 423 nm, respectively. The probe can be used in a variety of conditions to detect TNP due to its relatively stable properties. Meanwhile, it has a fast response time (< 1 min), wide linear response range (0.1-40 μM), and low detection limit (43.0 nM). This probe still has excellent selectivity and high sensitivity. The method was also used to detect standard water samples with a satisfactory recovery rate, and it will be used in the application of pollutants and clinical diseases. Graphical abstract.

An electron-rich small AIEgen as a solid platform for the selective and ultrasensitive on-site visual detection of TNT in the solid, solution and vapor states

Promising research on AIEgen (aggregation-induced emission active fluorogens)-based sensors for the detection of explosives (mostly picric acid) is primarily dominated by polymeric molecules. However, herein, we report the ability of a recently developed anthracene-based electron-rich π-conjugate as a small and suitable AIEgen for the selective and sensitive detection of 2,4,6-trinitrotoluene (TNT) through fluorescence (PL) quenching. This fluorophore consists of trimethoxybenzene-linked anthranyl-π-phenothiazine, which is recognized as a significantly electron-rich AIEgen suitable for the selective detection of TNT detection. The detection of TNT was performed in the solid, liquid and vapor states using this AIEgen in the aggregate or solid-state. The detection limit in the solution state was measured to be 3.2 × 10-9 M. When this fluorophore was impregnated on a paper strip for on-site visual detection, TNT was detected up to the 10-14 M level by the naked eye using a 365 nm UV-torch. The paper strip was also successfully used to detect TNT in the vapour state. This application was further extended to detect TNT in field soil. The detection of TNT by replacing trimethoxybenzene in the fluorophore with dimethoxy or monomethoxy was a failure, indicating the requirement of an adequate electron-rich system. Unlike the previous report with static quenching as the main reason for TNT detection, our experimental observations demonstrated the participation of favorable photo-induced electron transfer (PET) between TNT and the fluorophore as the origin of the PL quenching.

Electron-Rich π-Extended Diindolotriazatruxene-Based Chemosensors with Highly Selective and Rapid Responses to Nitroaromatic Explosives

A series of electron-rich π-extended diindolotriazatruxene-based compounds DIT, 4Py-DIT (bearing pyrene units) and 4PyF-DIT (bearing fluorene units) have been explored and investigated as fluorescence chemosensors. Quantitative analysis through fluorescence titrations showed that the resulting DIT molecules exhibited highly selective response to electron-deficient nitroaromatic explosives. The calculated Stern-Volmer quenching constants (>4.0×10³  M^-1 ) revealed that these sensors were much more sensitive in solution compared to most of the existing small-molecule fluorescence chemosensors based on pyrene, triphenylene, triphenylamine, and triazatruxene skeletons. Fluorescence quenching showed that the sensors adsorbed on paper were sensitive to explosives in the solid, solution, and vapor phases, with fast response times of about 10 s. Moreover, these chemosensors are reusable for the detection of nitroaromatic compounds as they recover their fluorescence intensity after quenching.

Triptycene-Derived Photoresponsive Fluorescent Azo-Polymer as Chemosensor for Picric Acid Detection

Two new triptycene-based azobenzene-functionalized polymers (TBAFPs) have been synthesized using the well-known Pd-catalyzed Sonogashira cross-coupling polycondensation reaction between 2,6-diethynyltriptycene and (meta or para) dibromo-azobenzenes. Enhancement of the fluorescent emission intensity was observed upon trans → cis isomerization of -N=N- linkage in TBAFPs. The cis-lifetime of TBAFP1 is rather long (greater than 2 days). The resulting materials were tested as a potential chemosensor for the detection of picric acid (PA)-a water pollutant as well as chemical constituent of explosives used in warfare. PA was found to interact strongly with TBAFPs, which led to significant quenching of the latter's fluorescence emission intensities. The binding constants are in the order of 105 M-1. TBAFPs were also able to detect PA in nanomolar concentrations.

Rapid detection of TNP based on a commercial fluorescent probe

A simple, rapid and low cost sensing method for the fluorescent detection of TNP in 100% aqueous media was successfully developed based on a commercial probe. Under the non-covalent interactions between TNP with probe, a ratiometric output signal was achieved, which can be applied in real samples test.

β-Octaalkoxyporphyrins: Versatile fluorometric sensors towards nitrated explosives

Real time detection of explosive residues is important to mitigate increasing security threats. Therefore, systematic studies are essential to optimize the performance of sensors. In this work, we have explored β-octamethoxyporphyrin and β-octabutoxyporphyrin to evaluate the effect of alkoxy groups in solution and in vapor phase sensing of nitrated explosives. Our systematic studies revealed a marked difference in sensitivity of these free-base porphyrins in solution state and vapor phase sensing of nitrated explosives simply by modulation of alkyl chain lengths. Alkoxyporphyrins exhibit very good sensitivity towards not only nitro aromatics but also alkyl nitro explosive taggants compared to β-octaethylporphyrin. Therefore, alkoxyporphyrins may act as versatile fluorescence turn-off based chemical sensors for nitrated explosives.

Aggregation induced emission enhancement (AIEE) of tripodal pyrazole derivatives for sensing of nitroaromatics and vapor phase detection of picric acid

Organosoluble tris-pyrazole compounds aggregate in organic/aqueous solvent mixtures, showing aggregation-induced emission enhancement (AIEE), the latter being quenched by picric acid.

Receptor-Free Detection of Picric Acid: A New Structural Approach for Designing Aggregation-Induced Emission Probes

A pristine aggregation-induced enhanced emission (AIEE) active monomer 2,5-bis(( E)-4-bromostyryl)-3,4-diphenylthiophene (TPBZ) and its copolymer (PFTPBZ) with 9,9-dioctylfluorene-2,7-diboronic acid bis(1,3-propandiol) ester have been synthesized via Suzuki coupling polymerization. PFTPBZ that is devoid of any receptor showed AIEE property and demonstrated excellent and selective fluorometric recognition of 2,4,6-trinitrotoluene (TNT) in aggregated state (aqueous medium) and picric acid (PA) in aggregated state and solution state (organic solvent) as well as in vapor phase via PFTPBZ dip-coated Whatman filter paper on a solid-phase platform in 1.86 ng level (naked eye). Limit of detection (LOD) for TNT in 95% water fraction ( f_w) was 53.74 × 10^-6 M, and at 40% f_w, it was 14.26 × 10^-7 M. PA detection in tetrahydrofuran solution was possible with a LOD of 28.16 × 10^-7 M, 95% f_w with LOD of 10.47 × 10^-6 M, and in 40% f_w with LOD of 47.39 × 10^-8 M. As a unique example of structural design, the probe PFTPBZ surprisingly possesses no receptor, yet remarkably high selectivity was achieved via Förster resonance energy transfer (FRET) and photoinduced electron transfer from the copolymer PFTPBZ to PA and TNT. Detection of PA in the presence of various metal analytes and inorganic acids in real water samples (lakes, rivers, and sea water) was also demonstrated using this concept of receptor-free conjugated polymer probe.

Efficient energy transfer between coronene-modified permethyl-β-cyclodextrins and porphyrin for light induced DNA cleavage

A novel supramolecular assembly was constructed by the noncovalent complexation of hexa-cata-hexabenzocoronene modified permethyl-β-cyclodextrins with tetrasodium tetraphenylporphyrintetrasulfonate in water, exhibiting highly efficient excited energy transfer behaviors and a promising DNA photocleavage ability.

1,3,5-Triphenylbenzene: a versatile photoluminescent chemo-sensor platform and supramolecular building block

Rich and diverse chemistry of 1,3,5-triphenylbenzene is discussed with emphasis on fluorescence based chemo-sensors, apart from a discussion on its use in building a number of supramolecular assemblies and fluorescent covalent-organic-frameworks.

Pendant chain engineering to fine-tune the nanomorphologies and solid state luminescence of naphthalimide AIEEgens: application to phenolic nitro-explosive detection in water

Strategically, a series of five angular "V" shaped naphthalimide AIEEgens with varying pendant chains (butyl, hexyl, octyl, cyclohexyl and methylcyclohexyl) have been synthesized to fine-tune their nanomorphological and photophysical properties. With similar aromatic cores and electronic states, unexpected tuning of the condensed state emission colors and nanomorphologies (reproducible on any kind of surface) of naphthalimides has been achieved for the first time simply by varying their side chains. Conclusive analysis by various spectroscopic techniques (SC-XRD, powder-XRD, DLS, FESEM) and DFT computational studies confirmed the full control of the pendant chain (in terms of bulkiness around the naphthalimide core, which restricts the ease of intermolecular π-π interactions) over the nanoaggregate morphology and solid state emissive properties of the AIEEgens; this can be rationalized to all aggregation-prone systems. These comprehensive studies establish a conceptually unique yet simple and effective method to precisely tune the nanomorphologies and the emission colors of aggregation-prone small organic molecules by judicious choice of the non-conjugated pendant chain. Thus, considering the prime role of the active layer nanomorphology in all organic optoelectronic devices, this methodology may emerge as a promising tool to improve device performance. Among all the congeners, the hexyl chain-containing congener (HNQ) forms well-defined nanoribbons with smaller diameters (as confirmed from DLS: 166 nm and FESEM: 150 nm) and provides a larger surface area. Consequently, the HNQ-nanoribbons were employed as a fluorescent sensor for the discriminative detection of trinitrophenol (TNP) in pure aqueous media. FE-SEM images revealed that, upon gradual addition of TNP (10 nM to 100 μM), these nanoribbons undergo an aggregation/disaggregation process, forming non-fluorescent co-aggregates with TNP, and provide highly enhanced sensitivity compared to existing state-of-the-art on aggregation-prone systems. Fluorescence titration studies confirmed that HNQ can detect the presence of TNP as low as 16.8 ppb and can serve as a cost-effective portable device incorporated with UV-light for on-site visual detection of TNP, even in the presence of potentially competing nitroaromatic compounds.

Simple Bisthiocarbonohydrazone as a Sensitive, Selective, Colorimetric, and Ratiometric Fluorescent Chemosensor for Picric Acids

A bisthiocarbonohydrazone-based chemosensor molecule (R1) containing a tetrahydro-8-hydroxyquinolizine-9-carboxaldehyde moiety has been synthesized and characterized as a new ratiometric fluorescent probe for picric acid (PA). The ratiometric probe R1 is a highly selective and sensitive colorimetric chemosensor for PA. The association between the chemosensor and PA and the ratiometric performance enabled by the key role of excited state intramolecular proton transfer in the detection process are demonstrated. Selectivity experiments proved that R1 has excellent selectivity to PA over other nitroaromatic chemicals. Importantly, the ratiometric probe exhibited a noteworthy change in both colorimetric and emission color, and this key feature enables R1 to be employed for detection of PA by simple visual inspection in silica-gel-coated thin-layer chromatography plates. Probe R1 has been shown to detect PA up to 3.2 nM at pH 7.4. Microstructural features of R1 and its PA complex have been measured by a field emission scanning electron microscope, and it clearly proves that their morphological features differ dramatically both in shape and size. Density function theory and time-dependent density function theory calculations were performed to establish the sensing mechanism and the electronic properties of probe R1. Furthermore, we have demonstrated the utility of probe R1 for the detection of PA in live Vero cells for ratiometric fluorescence imaging.

Highly sensitive and selective detection of picric acid using a one pot biomolecule inspired polyindole/CdS nanocomposite

Picric acid has become a serious pollution source of groundwater, soil and other security applications due to its explosivity and high toxicity.

A highly zinc-selective ratiometric fluorescent probe based on AIE luminogen functionalized coordination polymer nanoparticles

A highly zinc-selective ratiometric fluorescent probe was developed based on the cation exchange process of Tb-HDBB-CPNs with Zn²⁺.

A nonconjugated macromolecular luminogen for speedy, selective and sensitive detection of picric acid in water

A conventional fluorophore-free water-soluble copolymer based on poly(styrene-alt-maleimide) has been found to be selective and sensitive detection of picric acid in a 100% aqueous environment with prompt response.

Bigger and Brighter Fluorenes: Facile π-Expansion, Brilliant Emission and Sensing of Nitroaromatics

π-Expanded butterfly-like 2D fluorenes and 3D spirobifluorenes 1-5 were synthesized via a DDQ-mediated oxidative cyclization strategy with a high regioselectivity. Through structural modification via π-expansion, it was possible to achieve near-ultraviolet absorption, bright-blue emission, very high near-unity fluorescence quantum yields in solution as well as in film states, and deep-lying HOMO energy levels with excellent thermal stabilities. Furthermore, these electron-rich compounds displayed a notable behavior towards sensing of nitroaromatic explosives, such as picric acid, up to a detection limit of 0.2 ppb.

Anion-Exchange Induced Strong π-π Interactions in Single Crystalline Naphthalene Diimide for Nitroexplosive Sensing: An Electronic Prototype for Visual on-Site Detection

A new derivative of naphthalene diimide (NDMI) was synthesized that displayed optical, electrical, and visual changes exclusively for the most widespread nitroexplosive and highly water-soluble toxicant picric acid (PA) due to strong π-π interactions, dipole-charge interaction, and a favorable ground state electron transfer process facilitated by Coulombic attraction. The sensing mechanism and interaction between NDMI with PA is demonstrated via X-ray diffraction analysis, (1)H NMR studies, cyclic voltammetry, UV-visible/fluorescence spectroscopy, and lifetime measurements. Single crystal X-ray structure of NDMI revealed the formation of self-assembled crystalline network assisted by noncovalent C-H···I interactions that get disrupted upon introducing PA as a result of anion exchange and strong π-π stacking between NDMI and PA. Morphological studies of NDMI displayed large numbers of single crystalline microrods along with some three-dimensional (3D) daisy-like structures which were fabricated on Al-coated glass substrate to construct a low-cost two terminal sensor device for realizing vapor mode detection of PA at room temperature and under ambient conditions. Furthermore, an economical and portable electronic prototype was developed for visual and on-site detection of PA vapors under exceptionally realistic conditions.

Supramolecular Assembly of Coronene Derivatives for Drug Delivery

Possessing a small size and C3-symmetrical rigid backbone, a coronene derivative was synthesized from β-cyclodextrins and hexa-cata-hexabenzocoronene, and then a water-soluble and biocompatible nanographene/polysaccharide supramolecular assembly was successfully fabricated through noncovalent interactions between adamantly grafted hyaluronic acids and β-cyclodextrin-modified hexa-cata-hexabenzocoronene. Moreover, the ternary supramolecular assembly showed not only a fluorescence imaging ability toward cancer cells but also good anticancer activity and low toxicity.

Tuning of Aggregation Enhanced Emission and Solid State Emission from 1,8-Naphthalimide Derivatives: Nanoaggregates, Spectra, and DFT Calculations

Four new 1,8-naphthalimide based compounds, 4-(1,3-dioxo-1H,3H-benzo[de]isoquinolin-2-ylmethyl)-benzoic acid (LH), 4-(1,3-dioxo-1H,3H-benzo[de]isoquinolin-2-ylmethyl)-benzoic acid methyl ester (LMe), 4-(1,3-dioxo-1H,3H-benzo[de]isoquinolin-2-ylmethyl)-benzoyl chloride (LCl), and 4-(1,3-dioxo-1H,3H-benzo[de]isoquinolin-2-ylmethyl)-benzoic acid hydrazide (LN) are synthesized and characterized using spectral data and X-ray crystallography. They form nanoaggregates in aqueous-DMF solution and exhibited aggregation enhanced emission. The nanoaggregates are characterized using their scanning electron and atomic force microscopy images. The emission intensity follows the order as LH > LMe > LCl > LN. Their photophysical properties are recorded both in solution and in the solid-state and are correlated with the nature of benzoic acid derivatives owing to the combinatorial effect of π-π stacking and intermolecular and intramolecular interactions. The density functional theory calculations empower the understanding of their molecular and cumulative electronic behaviors. Antiparallel dimeric interactions in the solid-state extend a herringbone arrangement to LH and 2D channel and stair-like arrangement for LCl and LN, respectively.