Plasmon induced nano Au particle decorated over S,N-modified TiO(2) for exceptional photocatalytic hydrogen evolution under visible light

Decoration of Carbon Dots on Oxygen-Vacancy-Enriched S-Scheme TiO2 Quantum Dots/TiO2 Oxygen Vacancies Photocatalysts: Impressive Quantum-Dot-Sized Photocatalysts for Remediation of Antibiotics, Bacteria, and Dyes

Today, cleaning the environment using photocatalytic technology is one of the main research activities. In this study, carbon dots (C-dots) were anchored on oxygen-vacancy-enriched TiO2 quantum dots (QDs)/TiO2 oxygen vacancies (OVs) using a facile procedure. The resultant ternary TiO2 QDs/TiO2 OVs/C-dots photocatalysts with a quantum dot size of almost 4.55 nm were used for detoxification of aqueous solutions containing four antibiotics and three organic dyes as well as inactivation of two pathogenic bacteria, including Escherichia coli and Staphylococcus aureus, upon visible light. The degradation constant of tetracycline over the optimized TiO2 QDs/TiO2 OVs/C-dots nanocomposite reached 714 × 10-4 min-1, which was 17.3, 12.1, and 2.92 times higher than TiO2 QDs, TiO2 OVs, and TQDs/TOVs (1:1) materials, respectively. Effective separation of electron-hole pairs between TiO2 QDs and TiO2 OVs counterparts through decorated C-dots by an established S-scheme system was the main reason for boosted photocatalytic activity. With regard to the facile growth of wheat and lentil seeds in the treated solutions, it is hoped that the TiO2 QDs/TiO2 OVs/C-dots nanocomposite with significant stability could be used to clean up wastewaters.

A rationally designed 3DTiO2@CdZnS heterojunction photocatalyst for effectively enhanced visible-light-driven hydrogen evolution

Hydrogen production with higher efficiency and lower cost is of great significance for the sustainable development of energy. Zinc cadmium sulfide (CZS) is gaining more attention owing to its excellent photocatalytic properties. However, its development is greatly limited due to photogenerated charge recombination. In this work, an innovative design with a unique 3D morphology was introduced by integrating 3DTiO2 into CZS to form a novel 3DTiO2/CZS heterojunction photocatalyst. As a result, the optimized composite achieved a very high hydrogen production rate of 75.38 mmol h-1 g-1 under visible light, which is 2.4 times higher than that of the original CZS. It can also be greatly demonstrated through photoelectrochemical tests that this unique 3D morphology contributes to the effective separation of electrons and holes, thus dramatically improving the photocatalytic activity of 3DTiO2/CZS composites. The 3DTiO2/CZS composite has a rational energy band structure, which makes it more favorable for the hydrogen precipitation reaction. It is believed that such a modification strategy based on 3DTiO2 can be applied to other similar photocatalysts as well for boosting hydrogen evolution.

Facile aqueous synthesis and comparative evaluation of TiO2-semiconductor and TiO2-metal nanohybrid photocatalysts in antibiotics degradation under visible light

Advanced oxidation processes using TiO2-based nanomaterials are sustainable technologies that hold great promise for the degradation of many types of pollutants including pharmaceutical residues. A wide variety of heterostructures coupling TiO2 with visible-light active nanomaterials have been explored to shift its photocatalytic properties to harness sun irradiation but a systematic comparison between them is lacking in the current literature. Furthermore, the high number of proposed nanostructures with different size, morphology, and surface area, and the often complex synthesis processes hamper the transition of these materials into commercial and effective solutions for environmental remediation. Herein, we have designed a facile and cost-effective method to synthesize two heterostructured photocatalysts representative of two main families of novel structures proposed, hybrids of TiO2 with metal (Au) and semiconductor (CeO2) nanomaterials. The photocatalysts have been extensively characterized to ensure a good comparability in terms of co-catalyst doping characteristics, morphology and surface area. The photocatalytic degradation of ciprofloxacin and sulfamethoxazole as target pollutants, two antibiotics of high concern polluting water sources, has been evaluated and CeO2/TiO2 exhibited the highest activity, achieving complete antibiotic degradation at very low photocatalyst concentrations. Our study provides new insights into the development of inexpensive heterostructured photocatalysts and suggests that the non-stoichiometry and characteristic d and f electronic orbital configuration of CeO2 have a significantly improved role in the enhancement of the photocatalytic reaction.

Investigation of the Photocatalytic Activity of Electrospun and Surface-Modified PAN/α-FeOOH Nanofibers for the Degradation of Hazardous Azo Dyes

Decoration of α-FeOOH nanorods over PAN nanofibers was performed using the electrospinning technique. The as-designed decorated nanofibers were characterized using various techniques such as wide-angle powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared (FTIR) spectroscopy, UV-vis spectrophotometry (UV-vis), thermogravimetry analysis (TGA), N2 adsorption-desorption isotherm (BET), and X-ray photoelectron spectrometry (XPS). α-FeOOH NRs were decorated uniformly over PAN fibers, as observed from its morphological investigation, which shows novelty. 1D α-FeOOH nanorods with PAN nanofibers have not been studied for photocatalytic characteristics. No literature mentions that α-FeOOH nanorods coated in PAN NFs act as photocatalysts to degrade hazardous azo dyes. α-FeOOH nanorods on PAN NFs inhibit aggregation and increase dye binding, boosting photocatalytic performance. PAN/α-FeOOH NFs have a maximal specific surface area with a reduced bandgap than α-FeOOH NRs. PAN/α-FeOOH nanofibers showed excellent photocatalytic activity for the degradation of Trypan blue (TB) (120 min, 99.7%) and Eriochrome black T (EBT) dyes (160 min, 97.6%), respectively, under solar light irradiation. PAN/α-FeOOH NFs have the potential to be used in the degradation of azo dyes and the treatment of wastewater due to their low energy requirements and versatility.

MoS2-Based Nanocomposites for Photocatalytic Hydrogen Evolution and Carbon Dioxide Reduction

Photocatalysis is a facile and sustainable approach for energy conversion and environmental remediation by generating solar fuels from water splitting. Due to their two-dimensional (2D) layered structure and excellent physicochemical properties, molybdenum disulfide (MoS₂) has been effectively utilized in photocatalytic H₂ evolution reaction (HER) and CO₂ reduction. The photocatalytic efficiency of MoS₂ greatly depends on the active edge sites present in their layered structure. Modifications like reducing the layer numbers, creating defective structures, and adopting different morphologies produce more unsaturated S atoms as active edge sites. Hence, MoS₂ acts as a cocatalyst in nanocomposites/heterojunctions to facilitate the photogenerated electron transfer. This review highlights the role of MoS₂ as a cocatalyst for nanocomposites in H₂ evolution reaction and CO₂ reduction. The H₂ evolution activity has been described comprehensively as binary (with metal oxide, carbonaceous materials, metal sulfides, and metal-organic frameworks) and ternary composites of MoS₂. Photocatalytic CO₂ reduction is a more complex and challenging process that demands an efficient light-responsive semiconductor catalyst to tackle the thermodynamic and kinetic factors. Photocatalytic reduction of CO₂ using MoS₂ is an emerging topic and would be a cost-effective substitute for noble catalysts. Herein, we also exclusively envisioned the possibility of layered MoS₂ and its composites in this area. This review is expected to furnish an understanding of the diverse roles of MoS₂ in solar fuel generation, thus endorsing an interest in utilizing this unique layered structure to create nanostructures for future energy applications.

Nanoarchitecture of a Ti3C2@TiO2 Hybrid for Photocatalytic Antibiotic Degradation and Hydrogen Evolution: Stability, Kinetics, and Mechanistic Insights

Designing of a visible-light-driven semiconductor-based heterojunction with suitable band alignment and well-defined interfacial contact is considered to be an effective strategy for the transformation of solar-to-chemical energy and environmental remediation. In this context, MXenes have received tremendous attention in the research community due to their merits of abundant derivatives, elemental composition, excellent metallic conductivity, and surface termination groups. Meanwhile, a facile synthetic strategy for MXene-derived TiO₂ nanocomposites with stable framework and higher photocatalytic activity under visible-light irradiation still remains a challenge for researchers. Herein, we report a novel synthetic strategy of preparing a two-dimensional Ti₃C₂@TiO₂ nanohybrid by a facile reflux method under acidic conditions. In this oxidation reaction, protonation of the hydroxyl terminal group of MXene creates Ti more electrophilic and susceptible to an oxidative nucleophilic addition reaction with the presence of both water and oxygen. The physicochemical properties of the nanohybrid Ti₃C₂@TiO₂ were verified by varieties of characterization techniques. High-resolution transmission electron microscopy and X-ray photoelectron spectroscopy analysis specifically elucidated the intimate interfacial interaction between Ti₃C₂ and TiO₂. The optimized Ti₃C₂@TiO₂-48 h photocatalyst exhibited the highest tetracycline hydrochloride (TCH, 90% in 90 min) degradation efficiency in comparison to pristine TiO₂ with a rate constant (k) of 0.02463 min^-1. The major contribution of ^•O₂^- and ^•OH radicals throughout photocatalytic TCH degradation was confirmed by the trapping experiment. Moreover, the photocatalyst showed the highest hydrogen generation rate of 140.8 μmol h^-1 along with an apparent conversion efficiency of 2.2%. The excellent photocatalytic activity of Ti₃C₂@TiO₂ originated from the superior electrical conductivity of cocatalyst Ti₃C₂, which facilitated spatial photogenerated e^-/h⁺ separation and transfer at the Ti₃C₂ MXene@TiO₂ interface. Overall, this research work will describe a promising protocol of designing MXene-derived photocatalysts toward efficient environmental remediation and wastewater treatment applications.

Rationally designed Ti3C2/N, S-TiO2/g-C3N4 ternary heterostructure with spatial charge separation for enhanced photocatalytic hydrogen evolution

The charge separation and transfer are the major issues dominating the under-laying energy conversion mechanism for photocatalytic system. Construction of semiconductor-based heterojunction system considered to be viable option for boosting the spatial charge separation and transfer in the photocatalytic water splitting system. Here, we design a ternary heterojunction of Ti₃C₂/N, S-TiO₂/g-C₃N₄ by thermal annealing and ultrasonic assisted impregnation method having a well-designed n-n heterojunction and noble metal free Schottky junction for adequate hydrogen evolution. The optimal content of 4 wt% Ti₃C₂ on N, S-TiO₂/g-C₃N₄ (4-TC/NST/CN) exhibit the highest rate of hydrogen generation 495.06μ mol h^-1 which is 3.1, 4.1 and 1.6 fold higher than the pristine N, S doped-TiO₂, g-C₃N₄ and binary hybrid (N, S doped-TiO₂/g-C₃N₄) respectively, with 7% apparent conversion efficiency (ACE). The increment in the activity is described to the robust photogenerated carrier separation and double charge transfer channels because of the formation of dual heterojunction (n-n heterojunction and Schottky junction). XRD and Raman results revealed the occupancy of Ti₃C₂ in the heterojunction due to the strong interaction between Ti₃C_2, with N, S doped-TiO₂ and g-C₃N₄. The HRTEM analysis confirmed the formation of close interfacial junction between the Ti₃C₂, N, S doped-TiO₂ and g-C₃N₄. Moreover, the higher photocurrent, low PL intensity and lower impedance arc suggested the lower charge carrier recombination rate in 4-TC/NST/CN heterojunction. This work represents a significant development to establish a sound foundation for future design of MXene-based ternary hybrid system towards significant charge carrier separation and transfer for H₂ production activity.

Trioctylphosphine Oxide (TOPO)-Assisted Facile Fabrication of Phosphorus-Incorporated Nanostructured Carbon Nitride Toward Photoelectrochemical Water Splitting with Enhanced Activity

Designing nanostructured arrays of two-dimensional surfaces and interfaces is a versatile approach to increasing their photoelectrochemical activity. Here, phosphorus (P)-incorporated nanostructured carbon nitride (h-PCN) with an enlarged surface area is fabricated by employing trioctylphosphine oxide (TOPO) as a dopant precursor for visible-light-driven photoelectrochemical water splitting to produce hydrogen. The structural, morphological, and electronic properties of the photocatalyst have been characterized through various physicochemical techniques. We show that the incorporation of P into the g-C₃N₄ framework enhances light absorption over broad regimes, charge separation, and migration, as well as the specific surface area, showing excellent photocurrent enhancement (5.4 folds) in the cathodic direction as compared to bulk g-C₃N₄. Moreover, the photocathode shows 3.3-fold enhancement in current at zero biased potential. Without using any cocatalyst, the photoelectrodes produced 27 μmol h^-1 of H₂ and 13 μmol h^-1of O₂ with 95% faradic efficiency. The excellent photoelectrochemical behavior toward water-splitting reactions by the photoelectrode is attributed to the synergistic effect of P incorporation and active sites emerging from the nanostructured architecture of the material. This work demonstrates the facile fabrication of nanostructured P-incorporated g-C₃N₄ toward water-splitting reactions to produce hydrogen without using a cocatalyst in a simple and cost-effective way.

Black titania an emerging photocatalyst: review highlighting the synthesis techniques and photocatalytic activity for hydrogen generation

The TiO₂ semiconductor photocatalyst is in the limelight of sustainable energy research in recent years because of its beneficial properties. However, its wide band-gap and rapid exciton recombination rate makes it a lame horse, and reduces its photocatalytic efficiency. Recently, researchers have developed facile methods for lowering the band-gap, so that it captures a wide range of solar spectrum, but the efficiency is still way behind the target value. After the discovery of black titania (B-TiO₂), the associated drawbacks of white TiO₂ and its modified forms were addressed to a large extent because it not only absorbs photons in a broad spectral range (UV to IR region), but also modifies the structural and morphological features, along with the electronic properties of the material, significantly boosting the catalytic performance. Hence, B-TiO₂ effectively converts solar energy into renewable chemical energy i.e. green fuel H₂ that can ultimately satisfy the energy crisis and environmental pollution. However, the synthesis techniques involved are quite tedious and challenging. Hence, this review summarizes various preparation methods of B-TiO₂ and the involved characterization techniques. It also discusses the different modification strategies adopted to improve the H₂ evolution activity, and hopes that this review acts as a guiding tool for researchers working in this field.

In situ construction of sulfated TiO2 nanoparticles with TiOSO4 for enhanced photocatalytic hydrogen production

Photocatalytic hydrogen production from water is a promising method to obtain clean energy in the future. In this work, the sulfated TiO2 photocatalyst is successfully constructed in situ via a soft-templated method for photocatalytic water splitting to produce hydrogen. The content of sulfate species in TiO2 can be tuned by changing the amount of the surfactant. The photocatalyst with the appropriate content of sulfate ions exhibits an apparent quantum efficiency (AQE) of 3.9% at 365 nm and a high hydrogen production rate of 24.32 mmol h-1 g-1, which is 1.65 times that of commercial TiO2 (P25). The optimized photocatalyst has excellent photocatalytic activity for hydrogen evolution benefitting from the presence of sulfate ions on the surface of TiO2, large surface area and oxygen vacancies, which facilitates the rapid migration of photo-generated electrons to its surface and the improvement of the separation efficiency of photo-generated carriers. This work may inspire the rational design and the development of high-efficiency photocatalysts.

Growth of macroporous TiO2 on B-doped g-C3N4 nanosheets: a Z-scheme photocatalyst for H2O2 production and phenol oxidation under visible light

BCN/TiO₂ heterostructured photocatalyst was demonstrated towards H₂O₂ production and phenol oxidation under visible light, based on Z-scheme and p–n heterojunction mechanism.

Photoinduced Deposition of Platinum from (Bu4N)2[Pt(NO3)6] for a Low Pt-Loading Pt/TiO2 Hydrogen Photogeneration Catalyst

An efficient method for the deposition of ionic platinum species PtO_x onto a TiO₂ surface was developed on the basis of light-induced activation of the [Pt(NO₃)₆]^2- anion. The deposited PtO_x species with an effective Pt oxidation state between +4 and +2 have an oxygen-made environment and include single ion centers {PtO_n} and polyatomic ensembles {Pt_nO_m} connected to a TiO₂ surface with Pt-O-Ti bonds. The resulting PtO_x/TiO₂ materials were tested as photocatalysts for the hydrogen evolution reaction (HER) from a water ethanol mixture and have shown uniquely high activity with the rate of H₂ evolution achieving 11 mol h^-1 per gram of Pt, which is the highest result for such materials reported to date. A combination of spectral methods shows that, under HER conditions, reduction of the supported PtO_x species leads to the formation of well-dispersed nanoparticles of metallic platinum attached on the surface of TiO₂ by Ti-O-Pt bonds. The high activity of the PtO_x/TiO₂ materials is believed to result from a combination of uniform distribution of small platinum nanoparticles over the titania surface and their close interaction with TiO₂.

Cu-Ag Bimetal Alloy Decorated SiO2@TiO2 Hybrid Photocatalyst for Enhanced H2 Evolution and Phenol Oxidation under Visible Light

With a broader objective to replace visible light driven Pt-based photoelectrochemical/catalytic hydrogen evolution, a series of cost-effective bimetallic nanoalloys of Cu-Ag have been deposited on core-shell nanostructured SiO₂@TiO₂ through a facile reduction route. The physicochemical properties, i.e. crystal structure, morphology, chemical environment, and optical properties of Cu-Ag bimetal alloy decorated SiO₂@TiO₂ hybrid photocatalyst, have been thoroughly investigated through X-ray diffraction, high resolution transmission electron microscopy, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, UV-vis diffuse reflectance spectroscopy, and photoluminescence spectroscopy, respectively. TEM study confirms the coating of an ultrathin layer of TiO₂ shell on 100 nm sized SiO₂ core, and about 4.5 nm of Ag-Cu nanoalloys are uniformly distributed on the core-shell nanostructure. The higher light absorption throughout the visible range and better separation of charge carrier by Ag-Cu (1:3) deposited SiO₂@TiO₂ hybrid compared to other counterparts is confirmed from UV-vis, diffuse reflectance spectroscopy, photoluminescence, and electrochemical impedance studies. Eightfold higher photocurrent enhancements, threefold enhanced photocatalytic hydrogen generation, and twofold higher phenol oxidation activities of Ag-Cu (1:3) deposited SiO₂@TiO₂ hybrid compared to those of the monometallic plasmonic catalyst may be attributed to the synergetic effect of enriched light harvesting and surface plasmon induced hot electron transfer from the nanoalloy to the TiO₂ interface, resulting in efficient charge transfer.

Bandgap engineering via boron and sulphur doped carbon modified anatase TiO2: a visible light stimulated photocatalyst for photo-fixation of N2 and TCH degradation

The present research reports the synthesis of two-dimensional (2D) sheet/flake-like nanostructures of crystalline carbon modified TiO₂ (CT), B-TiO₂ (B-CT), and S-TiO₂ (S-CT) using a facile one-pot synthesis method. The crystallinity and phase purity (anatase) of the prepared nano-photocatalyst were characterised using X-ray diffraction, selected area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM) analysis. Furthermore, the morphological details and elemental content of the sample were studied via scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS), respectively. Additionally, the optoelectronic features of all of the prepared specimens were measured via UV-vis diffuse reflectance spectroscopy (DRS), photoluminescence (PL), impedance and Mott-Schottky studies. After successful characterisation, their photocatalytic performance was tested towards dinitrogen photo-fixation and tetracycline hydrochloride (TCH) degradation under visible light illumination. Moreover, the effective charge separation and greater availability of the active surface area led to the robust photocatalytic activity of the fabricated B-CT compared to the CT and S-CT samples, which correlates well with the PL, impedance and surface area analysis. B-CT displays the highest photocatalytic activity, i.e. 32.38 μmol L^-1 (conversion efficiency = 0.076%) of ammonia production, and 95% tetracycline hydrochloride (10 ppm) degradation. Here, we have effectively designed a novel and productive pathway towards the enhancement of the photocatalytic performance of visible photon active TiO₂-based materials for energy and environmental sustainability.

Improving the photocatalytic hydrogen production of SrTiO3 by in situ loading ethylene glycol as a co-catalyst

Ethylene glycol, as a cocatalyst, is supported on the surface of SrTiO₃, which greatly promotes the photocatalytic reaction efficiency.

Au/MoS2/Ti3C2 composite catalyst for efficient photocatalytic hydrogen evolution

The Au/MoS₂/Ti₃C₂ composite catalyst has efficient photocatalytic hydrogen evolution performance.

Complete Defluorination and Mineralization of Perfluorooctanoic Acid by a Mechanochemical Method Using Alumina and Persulfate

Perfluorooctanoic acid (PFOA) is a persistent organic pollutant that has received concerns worldwide due to its extreme resistance to conventional degradation. A mechanochemical (MC) method was developed for complete degradation of PFOA by using alumina (Al₂O₃) and potassium persulfate (PS) as comilling agents. After ball milling for 2 h, the MC treatment using Al₂O₃ or PS caused conversion of PFOA to either 1-H-1-perfluoroheptene or dimers with a defluorination efficiency lower than 20%, but that using both Al₂O₃ and PS caused degradation of PFOA with a defluorination of 100% and a mineralization of 98%. This method also caused complete defluorination of other C3∼C6 homologues of PFOA. The complete defluorination of PFOA attributes to Al₂O₃ and PS led to the weakening of the C-F bond in PFOA and the generation of hydroxyl radical (•OH), respectively. During the MC degradation, Al₂O₃ strongly anchors PFOA through COO^--Al coordination and in situ formed from Lewis-base interaction and PS through hydrogen bond. Meanwhile, mechanical effects induce the homolytic cleavage of PS to produce SO₄^•-, which reacts with OH group of Al₂O₃ to generate •OH. The degradation of PFOA is initiated by decarboxylation as a result of weakened C-COO^- due to Al³⁺ coordination. The subsequent addition of •OH, elimination of HF, and reaction with water induce the stepwise removal of all carboxyl groups and F atoms as CO₂ and F^-_, respectively. Thus, complete defluorination and mineralization are achieved.

Recent Progress on Metal Sulfide Composite Nanomaterials for Photocatalytic Hydrogen Production

Metal sulfide-based photocatalysts have gained much attention due to their outstanding photocatalytic properties. This review paper discusses recent developments on metal sulfide-based nanomaterials for H2 production, acting as either photocatalysts or cocatalysts, especially in the last decade. Recent progress on key experimental parameters, in-situ characterization methods, and the performance of the metal sulfide photocatalysts are systematically discussed, including the forms of heterogeneous composite photocatalysts, immobilized photocatalysts, and magnetically separable photocatalysts. Some methods have been studied to solve the problem of rapid recombination of photoinduced carriers. The electronic density of photocatalysts can be investigated by in-situ C K-edge near edge X-ray absorption fine structure (NEXAFS) spectra to study the mechanism of the photocatalytic process. The effects of crystal properties, nanostructure, cocatalyst, sacrificial agent, electrically conductive materials, doping, calcination, crystal size, and pH on the performance of composite photocatalysts are presented. Moreover, the facet effect and light trapping (or light harvesting) effect, which can improve the photocatalytic activity, are also discussed.

Realizing the Control of Electronic Energy Level Structure and Gas-Sensing Selectivity over Heteroatom-Doped In2O3 Spheres with an Inverse Opal Microstructure

Understanding the effect of substitutional doping on gas-sensing performances is essential for designing high-activity sensing nanomaterials. Herein, formaldehyde sensors based on gallium-doped In₂O₃ inverse opal (IO-(Ga _xIn_{1- x})₂O₃) microspheres were purposefully prepared by a simple ultrasonic spray pyrolysis method combined with self-assembled sulfonated polystyrene sphere templates. The well-aligned inverse opal structure, with three different-sized pores, plays the dual role of accelerating the diffusion of gas molecules and providing more active sites. The Ga substitutional doping can alter the electronic energy level structure of (Ga _xIn_{1- x})₂O₃, leading to the elevation of the Fermi level and the modulation of the band gap close to a suitable value (3.90 eV), hence, effectively optimizing the oxidative catalytic activity for preferential CH₂O oxidation and increasing the amount of adsorbed oxygen. More importantly, the gas selectivity could be controlled by varying the energy level of adsorbed oxygen. Accordingly, the IO-(Ga_0.2In_0.8)₂O₃ microsphere sensor showed a high response toward formaldehyde with fast response and recovery speeds, and ultralow detection limit (50 ppb). Our findings finally offer implications for designing Fermi level-tailorable semiconductor nanomaterials for the control of selectivity and monitoring indoor air pollutants.

Preparation of S–N co-doped CoFe2O4@rGO@TiO2 nanoparticles and their superior UV-Vis light photocatalytic activities

A S–N co-doped CoFe₂O₄@rGO@TiO₂ (CFGT-S/N) nanocomposite was successfully synthesized via a facile vapor-thermal method. XRD, XPS, FT-IR and FETEM results confirmed that N and S were co-doped into the lattice of TiO₂. Photocatalytic tests indicated that CFGT-S/N exhibited excellent UV-Vis photocatalytic activity for decompositions of different organic dyes, including methyl orange (MO), rhodamine B (RhB) and methylene blue (MB). Particularly, the photocatalytic degradation rate of MO was about 33% higher than that when using P25 under visible light irradiation. The higher UV-Vis light photocatalytic activity of CFGT-S/N can be attributed to the synergetic effects of the strong absorption of visible light, the narrow band gap, improved separation of photo-generated electron/hole pairs, and the enhancement of the enrichment of pollutant dye molecules by S, N co-doping, CoFe₂O₄ and rGO. Moreover, this photocatalyst was superparamagnetic, which enables it to be easily recovered by an external magnetic field, and maintained stable photocatalytic efficiency over five cycles. Hence, CFGT-S/N with its highly efficient, recoverable and stable photocatalytic properties shows great potential for environmental treatment.

A magnetic recoverable S–N co-doped CoFe₂O₄@rGO@TiO₂ (CFGT-S/N) nanocomposite was synthesized via a facile vapor-thermal method. CFGT-S/N is an excellent UV-Vis photocatalyst because of the synergetic effects of S, N co-doping, the introduction of CoFe₂O₄ and rGO.

Laminated Hybrid Junction of Sulfur-Doped TiO2 and a Carbon Substrate Derived from Ti3C2 MXenes: Toward Highly Visible Light-Driven Photocatalytic Hydrogen Evolution

TiO2 is an ideal photocatalyst candidate except for its large bandgap and fast charge recombination. A novel laminated junction composed of defect-controlled and sulfur-doped TiO2 with carbon substrate (LDC-S-TiO2/C) is synthesized using the 2D transition metal carbides (MXenes) as a template to enhance light absorption and improve charge separation. The prepared LDC-S-TiO2/C catalyst delivers a high photocatalytic H2 evolution rate of 333 µmol g-1 h-1 with a high apparent quantum yield of 7.36% at 400 nm and it is also active even at 600 nm, resulting into a 48 time activity compared with L-TiO2/C under visible light irradiation. Further theoretical modeling calculation indicates that such novel approach also reduces activation energy of hydrogen production apart from broadening the absorption wavelength, facilitating charge separation, and creating a large surface area substrate. This synergic effect can also be applied to other photocatalysts' modification. The study provides a novel approach for synthesis defective metal oxides based hybrids and broaden the applications of MXene family.

Cr(VI) remediation from aqueous environment through modified-TiO2-mediated photocatalytic reduction

Cr(VI) exhibits cytotoxic, mutagenic and carcinogenic properties; hence, effluents containing Cr(VI) from various industrial processes pose threat to aquatic life and downstream users. Various treatment techniques, such as chemical reduction, ion exchange, bacterial degradation, adsorption and photocatalysis, have been exploited for remediation of Cr(VI) from wastewater. Among these, photocatalysis has recently gained considerable attention. The applications of photocatalysis, such as water splitting, CO2 reduction, pollutant degradation, organic transformation reactions, N2 fixation, etc., towards solving the energy crisis and environmental issues are briefly discussed in the Introduction of this review. The advantages of TiO2 as a photocatalyst and the importance of its modification for photocatalytic reduction of Cr(VI) has also been addressed. In this review, the photocatalytic activity of TiO2 after modification with carbon-based advanced materials, metal oxides, metal sulfides and noble metals towards reduction of Cr(VI) was evaluated and compared with that of bare TiO2. The photoactivity of dye-sensitized TiO2 for reduction of Cr(VI) was also discussed. The mechanism for enhanced photocatalytic activity was highlighted and attributed to the resultant properties, namely, effective separation of photoinduced charge carriers, extension of the light absorption range and intensity, increase of the surface active sites, and higher photostability. Advantages and limitations for photoreduction of Cr(VI) over modified TiO2 are depicted in the Conclusion. The various challenges that restrict the technology from practical applications in remediation of Cr(VI) from wastewater were addressed in the Conclusion section as well. The future perspectives of the field presented in this review are focused on the development of whole-solar-spectrum responsive, TiO2-coupled photocatalysts which provide efficient photocatalytic reduction of Cr(VI) along with their good recoverability and recyclability.

The effect of sulfate pre-treatment to improve the deposition of Au-nanoparticles in a gold-modified sulfated g-C3N4 plasmonic photocatalyst towards visible light induced water reduction reaction

In continuation of our earlier work on Au-g-C₃N₄ and to improve its activity further, Au incorporated sulfated carbon nitride (g-C₃N₄) has been designed by using a simple impregnation cum borohydrate reduction method for the visible light induced water reduction reaction for hydrogen generation. The photocatalysts were characterized using various instrumental methods such as PXRD, UV-Vis DRS, SEM, HR-TEM, XPS, PL and TRPL spectral analysis. Functionalisation by the -HSO₃ group and incorporation of AuNPs in the g-C₃N₄ skeleton lead to the extension of its pi-conjugated system, modification of its semiconductor properties, such as band structure engineering with a tunable bandgap, red-shift of the optical absorption band and promotion of charge migration and separation. The sulfate pre-treated g-C₃N₄ samples are supposed to have a defected surface due to oxygen vacancies, which increases the adsorption of AuNPs onto the vacant oxygen sites. Thus the AuNPs get adsorbed on the reduced surfaces, increasing the extent and effectiveness of the electronic communication between gold and the g-C₃N₄ interface. The improved photocatalytic activity could be attributed to the surface plasmon resonance (SPR) effect of AuNPs, which synergistically facilitates the photocatalysis process. The photocatalytic activity of Au-sulfated g-C₃N₄ for photocatalytic splitting of water to produce H₂ was increased 1.5 times compared to that of Au-g-C₃N₄, 2.5 times compared to that of sulphated-g-C₃N₄ and 35 times compared to that of single-phase g-C₃N₄.

Photocatalysis of estrone in water and wastewater: Comparison between Au-TiO2 nanocomposite and TiO2, and degradation by-products

Gold-modified TiO₂ (Au-TiO₂) photocatalysts were utilised for the degradation of estrone (E1), a major endocrine disrupting chemical in water and wastewater. Au-TiO₂ catalysts were synthesised by a deposition-precipitation method with gold loadings of 0-8% (wt%). The Au-TiO₂ nanocomposite exhibited superior activity compared to P25 TiO₂ under UVA (λ=365nm), cool white (λ>420nm) and green (λ=523nm) light emitting diodes (LEDs), for treating 1mgl^-1 of E1. The 4wt% Au loading was found to produce the best photocatalytic activity with a rate constant of 2.44±0.36h^-1, compared to 0.06±0.01h^-1 for P25 TiO₂, under visible light. In total 4 by-products were identified, one from negative ionization mode (m/z=269) and three from positive ionization mode (m/z=287) during photocatalysis, which were also degraded with time by Au-TiO₂. For different water matrices, the photodegradation rate of E1 decreased in the order: ultrapure water>synthetic wastewater≈wastewater effluent from membrane bio-reactor. Overall, 4wt% Au-TiO₂ demonstrated superior performance compared to P25 TiO₂ in water and wastewater.

Water splitting catalyzed by titanium dioxide decorated with plasmonic nanoparticles

The development of active, cheap, efficient and visible-light-driven water splitting catalysts is currently the center of intense research efforts. Amongst the most promising avenues, the design of titania and plasmonic nanoparticle hybrids is particularly appealing. Titania has been known for long to be an active photocatalyst, able to perform water splitting under light irradiation. However, this activity is limited to the ultraviolet spectrum and suffers from too rapid charge carrier recombination. The addition of plasmonic nanostructures enables to push absorption properties to the visible region and prevent unwanted charge recombination. In this review, we explain the principles behind the activity of such nanohybrids towards visible light water splitting and detail the recent research developments relying on plasmonic metals, namely Au, Ag and Cu.

Coupling of Crumpled-Type Novel MoS2 with CeO2 Nanoparticles: A Noble-Metal-Free p-n Heterojunction Composite for Visible Light Photocatalytic H2 Production

In terms of solar hydrogen production, semiconductor-based photocatalysts via p-n heterojunctions play a key role in enhancing future hydrogen reservoir. The present work focuses on the successful synthesis and characterization of a novel p-MoS₂/n-CeO₂ heterojunction photocatalyst for excellent performance toward solar hydrogen production. The synthesis involves a simple in situ hydrothermal process by varying the wt % of MoS₂. The various characterization techniques support the uniform distribution of CeO₂ on the surface of crumpled MoS₂ nanosheets, and the formation of p-n heterojunction is further confirmed by transmission electron microscopy and Mott-Schottky analysis. Throughout the experiment, it is demonstrated that 2 wt % MoS₂ in the MoS₂/CeO₂ heterojunction photocatalyst exhibits the highest rate of hydrogen evolution with a photocurrent density of 721 μA cm^-2. The enhanced photocatalytic activity is ascribed to the formation of the p-n heterojunction that provides an internal electric field to facilitate the photogenerated charge separation and transfer.

Enhanced visible light harnessing and oxygen vacancy promoted N, S co-doped CeO2 nanoparticle: a challenging photocatalyst for Cr(vi) reduction

Enhanced photocatalytic activity of N-, S-doped ceria nanoparticles towards Cr(vi) reduction under visible light irradiation.

Low temperature synthesis of Ag@anatase TiO2 nanocomposites through controlled hydrolysis and improved degradation of toxic malachite green under both ultra-violet and visible light

The synthesized nanocomposite materials have shown remarkable catalytic degradation efficiency even at low concentrations towards toxic dye molecules under visible light.

Boosting Photovoltaic Performance of Dye-Sensitized Solar Cells Using Silver Nanoparticle-Decorated N,S-Co-Doped-TiO2 Photoanode

A silver nanoparticle-decorated N,S-co-doped TiO₂ nanocomposite was successfully prepared and used as an efficient photoanode in high-performance dye-sensitized solar cells (DSSCs) with N719 dye. The DSSCs assembled with the N,S-TiO₂@Ag-modified photoanode demonstrated an enhanced solar-to-electrical energy conversion efficiency of 8.22%, which was better than that of a DSSC photoanode composed of unmodified TiO₂ (2.57%) under full sunlight illumination (100 mWcm⁻², AM 1.5 G). This enhanced efficiency was mainly attributed to the reduced band gap energy, improved interfacial charge transfer, and retarded charge recombination process. The influence of the Ag content on the overall efficiency was also investigated, and the optimum Ag content with N,S-TiO₂ was found to be 20 wt%. Because of the enhanced solar energy conversion efficiency of the N,S-TiO₂@Ag nanocomposite, it should be considered as a potential photoanode for high-performance DSSCs.

A facile in situ approach to fabricate N,S-TiO2/g-C3N4 nanocomposite with excellent activity for visible light induced water splitting for hydrogen evolution

The efficient charge separation, small crystallite size and enhanced specific surface area in N,S-TiO₂/g-C₃N₄ nanocomposites make the system pivotal and unique for hydrogen evolution.

An overview on visible light responsive metal oxide based photocatalysts for hydrogen energy production

The present review summarizes the recent development and challenges in visible light responsive metal oxide based photocatalysts for water splitting.

Nanogold plasmonic photocatalysis for organic synthesis and clean energy conversion

This review provides the basic concepts, an overall survey and the state-of-the art of plasmon-based nanogold photocatalysis using visible light including fundamental understanding and major applications to organic reactions and clean energy-conversion systems. First, the basic concepts of localized surface plasmon resonance (LSPR) are recalled, then the major preparation methods of AuNP-based plasmonic photocatalysts are reviewed. The major part of the review is dedicated to the latest progress in the application of nanogold plasmonic photocatalysis to organic transformations and energy conversions, and the proposed mechanisms are discussed. In conclusion, new challenges and perspectives are proposed and analyzed.

General facile approach to transition-metal oxides with highly uniform mesoporosity and their application as adsorbents for heavy-metal-ion sequestration

Mesoporous powders of transition-metal oxides, TiO2, ZrO2, HfO2, Nb2O5, and Ta2O5, pure from organic impurities were produced by a rapid single-step thermohydrolytic approach. The obtained materials display an impressively large active surface area and sharp pore-size distribution, being composed of partially coalesced uniform nanoparticles with crystalline cores and amorphous shells. They reveal extremely high adsorption capacity in removal of Cr(VI) anions from solutions (25.8 for TiO2, 73.0 for ZrO2, and 74.7 mg g(-1) for Nb2O5 in relation to the Cr2O7(2-) anion), making them very attractive as adsorbents in water remediation applications. The difference in adsorption capacities for the studied oxides may be explained by variation in surface hydration and surface-charge distribution.