Ultrathin TiO2 layer coated-CdS spheres core-shell nanocomposite with enhanced visible-light photoactivity

A Review of Metal-Organic Frameworks Derived Hollow-Structured Photocatalysts: Synthesis and Applications

Photocatalysis is a most important approach to addressing global energy shortages and environmental issues due to its environmentally friendly and sustainable properties. The key to realizing efficient photocatalysis relies on developing appropriate catalysts with high efficiency and chemical stability. Among various photocatalysts, Metal-organic frameworks (MOFs)-derived hollow-structured materials have drawn increased attention in photocatalysis based on advantages like more active sites, strong light absorption, efficient transfer of pho-induced charges, excellent stability, high electrical conductivity, and better biocompatibility. Specifically, MOFs-derived hollow-structured materials are widely utilized in photocatalytic CO2 reduction (CO2RR), hydrogen evolution (HER), nitrogen fixation (NRR), degradation, and other reactions. This review starts with the development story of MOFs, the commonly adopted synthesis strategies of MOFs-derived hollow materials, and the latest research progress in various photocatalytic applications are also introduced in detail. Ultimately, the challenges of MOFs-derived hollow-structured materials in practical photocatalytic applications are also prospected. This review holds great potential for developing more applicable and efficient MOFs-derived hollow-structured photocatalysts.

Decorating of 2D indium oxide onto 2D bismuth oxybromide to enhance internal electric field and stimulate artificial photosynthesis

CO2 photocatalytic reduction is an excellent strategy for promoting solar-to-chemical energy conversion and alleviating the severe environmental crisis. In this study, 2D indium oxide (IO) is decorated on 2D bismuth oxybromide (BOB) nanosheets to gain BOB/IO (BxIy) heterojunction. The optimal B3I1 composite affords a CO production rate of 54.2 μmol⋅g-1, about 2.2 times and 11.3 times higher than those of the pristine BOB and IO, respectively. The introduction of IO significantly enhances the internal electric field (IEF), leading to accelerated charge transfer and prolonged lifetime of the photogenerated carriers. In the BxIy composite, the BOB and IO serve as the electron acceptor and donor, respectively, facilitating the reduction of CO2 and oxidation of H2O. In-situ DRIFTs spectra are used to confirm the catalytic active sites and provide insights into the mechanism of CO2 photoreduction. The results suggest *COOH and *CO2- species played a crucial role in the formation of CO. This work presents a valuable perspective on understanding the charge transfer route and developing highly efficient photocatalysts for CO2 photoreduction.

Effect of Heat Treatment on Structure of Carbon Shell-Encapsulated Pt Nanoparticles for Fuel Cells

Polymer electrolyte membrane fuel cells (PEMFCs) have attracted much attention as highly efficient, eco-friendly energy conversion devices. However, carbon-supported Pt (Pt/C) catalysts for PEMFCs still have several problems, such as low long-term stability, to be widely commercialized in fuel cell applications. To address the stability issues of Pt/C such as the dissolution, detachment, and agglomeration of Pt nanoparticles under harsh operating conditions, we design an interesting fabrication process to produce a highly active and durable Pt catalyst by introducing a robust carbon shell on the Pt surface. Furthermore, this approach provides insights into how to regulate the carbon shell layer for fuel cell applications. Through the application of an appropriate amount of H2 gas during heat treatment, the carbon shell pores, which are integral to the structure, can be systematically modulated to facilitate oxygen adsorption for the oxygen reduction reaction. Simultaneously, the carbon shell functions as a protective barrier, preventing catalyst degradation. In this regard, we investigate an in-depth analysis of the effects of critical parameters including H2 content and the flow rate of H2/N2 mixed gas during heat treatment to prepare better catalysts.

Unraveling the origin of the high photocatalytic properties of earth-abundant TiO2/FeS2 heterojunctions: insights from first-principles density functional theory

Herein, first-principles density functional theory calculations have been employed to unravel the interfacial geometries (composition and stability), electronic properties (density of states and differential charge densities), and charge carrier transfers (work function and energy band alignment) of a TiO2(001)/FeS2(100) heterojunction. Analyses of the structure and electronic properties reveal the formation of strong interfacial Fe-O and Ti-S ionic bonds, which stabilize the interface with an adhesion energy of -0.26 eV Å-2. The work function of the TiO2(001)/FeS2(100) heterojunction is predicted to be much smaller than those of the isolated FeS2(100) and TiO2(001) layers, indicating that less energy will be needed for electrons to transfer from the ground state to the surface to promote photochemical reactions. The difference in the work function between the FeS2(100) and TiO2(001) heterojunction components caused an electron density rearrangement at the heterojunction interface, which induces an electric field that separates the photo-generated electrons and holes. Consistently, a staggered band alignment is predicted at the interface with the conduction band edge and the valence-band edge of FeS2 lying 0.37 and 2.62 eV above those of anatase. These results point to efficient charge carrier separation in the TiO2(001)/FeS2(100) heterojunction, wherein photoinduced electrons would transfer from the FeS2 to the TiO2 layer. The atomistic insights into the mechanism of enhanced charge separation and transfer across the interface rationalize the observed high photocatalytic activity of the mixed TiO2(001)/FeS2(100) heterojunction over the individual components.

CdS/TiO2 nano hybrid heterostructured materials for superior hydrogen production and gas sensor applications

In efforts to minimize environmental pollution and carbon-based gas emissions, photocatalytic hydrogen production and sensing applications at ambient temperature are important. This research reports on the development of new 0D/1D materials based on TiO₂ nanoparticles grown onto CdS hetersturctured nanorods via two-stage facile synthesis. The titanate nanoparticles when loaded onto CdS surfaces at an optimized concentration (20 mM), exhibited superior photocatalytic hydrogen production (21.4 mmol/h/g_cat). The optimized nanohybrid was recycled for 6 cycles up to 4 h, indicating its excellent stabity for a prolonged period. Also, the photoelectrochemical water oxidation in alkaline medium was investigated to offer the optimized CRT-2 composite with 1.91 mA/cm²@0.8 V vs. RHE (0 V vs. Ag/AgCl) that was used for effective room-temperature NO₂ gas detection exhibiting a higher response (69.16%) to NO₂ (100 ppm) at room temperature at the lowest detection limit of ∼118 ppb than the pristine counterparts. Further, NO₂ gas sensing performance of CRT-2 sensor was increased using UV light (365 nm) activation energy. Under the UV light, the sensor exhibited a remarkable gas sensing response quick response/recovery times (68/74), excellent long-term cycling stability, and significant selectivity to NO₂ gas. Due to high porosity and surface area values of CdS (5.3), TiO₂ (35.5), and CRT-2 (71.5 m²/g), excellent photocatalytic H₂ production and gas sensing of CRT-2 is ascribed to morphology, synergistic effect, improved charge generation, and separation. Overall, 1D/0D CdS@TiO₂ is proved to be an efficient material for hydrogen production and gas detection.

CdTe QDs-sensitized TiO2 nanocomposite for magnetic-assisted photoelectrochemical immunoassay of SARS-CoV-2 nucleocapsid protein

A sensitive, reliable, and cost-effective detection for SARS-CoV-2 was urgently needed due to the rapid spread of COVID-19. Here, a "signal-on" magnetic-assisted PEC immunosensor was constructed for the quantitative detection of SARS-CoV-2 nucleocapsid (N) protein based on Z-scheme heterojunction. Fe₃O₄@SiO₂@Au was used to connect the capture antibody to act as a capture probe (Fe₃O₄@SiO₂@Au/Ab₁). It can extract target analytes selectively in complex samples and multiple electrode rinsing and assembly steps were avoided effectively. CdTe QDs sensitized TiO₂ coated on the surface of SiO₂ spheres to form Z-scheme heterojunction (SiO₂@TiO₂@CdTe QDs), which broadened the optical absorption range and inhibited the quick recombination of photogenerated electron/hole of the composite. With fascinating photoelectric conversion performance, SiO₂@TiO₂@CdTe QDs were utilized as a signal label, thus further realizing signal amplification. The migration mechanism of photogenerated electrons was further deduced by active material quenching experiment and electron spin resonance (ESR) measurement. The elaborated immunosensor can detect SARS-CoV-2 N protein in the linear range of 0.005-50 ng mL^-1 with a low detection limit of 1.8 pg mL^-1 (S/N = 3). The immunosensor displays extraordinary sensitivity, strong anti-interference, and high reproducibility in detecting SARS-CoV-2 N protein, which envisages its potential application in the clinical diagnosis of COVID-19.

Saiz P, Reizabal A, Wuttke S, Celaya-Azcoaga L, Valverde A, Fernández de Luis R. A State-of-the-Art of Metal-Organic Frameworks for Chromium Photoreduction vs. Photocatalytic Water Remediation

Hexavalent chromium (Cr(VI)) is a highly mobile cancerogenic and teratogenic heavy metal ion. Among the varied technologies applied today to address chromium water pollution, photocatalysis offers a rapid reduction of Cr(VI) to the less toxic Cr(III). In contrast to classic photocatalysts, Metal-Organic frameworks (MOFs) are porous semiconductors that can couple the Cr(VI) to Cr(III) photoreduction to the chromium species immobilization. In this minireview, we wish to discuss and analyze the state-of-the-art of MOFs for Cr(VI) detoxification and contextualizing it to the most recent advances and strategies of MOFs for photocatalysis purposes. The minireview has been structured in three sections: (i) a detailed discussion of the specific experimental techniques employed to characterize MOF photocatalysts, (ii) a description and identification of the key characteristics of MOFs for Cr(VI) photoreduction, and (iii) an outlook and perspective section in order to identify future trends.

Creating triazine units to bridge carbon nitride with titania for enhanced hydrogen evolution performance

In this work, a wealth of triazine units was created in carbon nitride through a facile molten salt method to bridge titania and carbon nitride for accelerating charge transportation and enhancing hydrogen production performance. The doping of triazine ring into C₃N₄ framework results in more exposure of - CN - and - CN bond and forms a homojunction (MCN), which favors photocatalysis by acting as photoresponse and active centers, respectively. Moreover, the triazine units can bridge the hybridized C₃N₄ and TiO₂, forming a stable MCN/TiO₂ homo-heterojunction. Attributed to the matched band energy structure of MCN and TiO₂ and the structural characteristics of triazine/heptazine heterocyclic, the light response, charge separation and transfer as well as the lifetime of carriers on MCN/TiO₂ hybrid are improved significantly. As a result, the MCN/TiO₂ homo-heterojunction exhibits excellent activity and stability for photocatalytic hydrogen production performance, up to 2594 μmol∙g^-1∙h^-1 under simulated solar irradiation, which is 5.5 times higher than that of the bare g-C₃N₄.

ZnIn2S4 nanosheet growth on amine-functionalized SiO2 for the photocatalytic reduction of CO2

The growth of ZnIn2S4 nanosheets on NH–SiO2 promotes charge carrier separation and provides active sites for CO2 activation, therefore significantly boosting CO2 photoreduction efficiency.

Charge Transport Phenomena in Heterojunction Photocatalysts: The WO3/TiO2 System as an Archetypical Model

Recent studies have demonstrated the high efficiency through which nanostructured core-shell WO₃/TiO₂ (WT) heterojunctions can photocatalytically degrade model organic pollutants (stearic acid, QE ≈ 18% @ λ = 365 nm), and as such, has varied potential environmental and antimicrobial applications. The key motivation herein is to connect theoretical calculations of charge transport phenomena, with experimental measures of charge carrier behavior using transient absorption spectroscopy (TAS), to develop a fundamental understanding of how such WT heterojunctions achieve high photocatalytic efficiency (in comparison to standalone WO₃ and TiO₂ photocatalysts). This work reveals an order of magnitude enhancement in electron and hole recombination lifetimes, respectively located in the TiO₂ and WO₃ sides, when an optimally designed WT heterojunction photocatalyst operates under UV excitation. This observation is further supported by our computationally captured details of conduction band and valence band processes, identified as (i) dominant electron transfer from WO₃ to TiO₂ via the diffusion of excess electrons; and (ii) dominant hole transfer from TiO₂ to WO₃ via thermionic emission over the valence band edge. Simultaneously, our combined theoretical and experimental study offers a time-resolved understanding of what occurs on the micro- to milliseconds (μs-ms) time scale in this archetypical photocatalytic heterojunction. At the microsecond time scale, a portion of the accumulated holes in WO₃ contribute to the depopulation of W⁵⁺ polaronic states, whereas the remaining accumulated holes in WO₃ are separated from adjacent electrons in TiO₂ up to 3 ms after photoexcitation. The presence of these exceptionally long-lived photogenerated carriers, dynamically separated by the WT heterojunction, is the origin of the superior photocatalytic efficiency displayed by this system (in the degradation of stearic acid). Consequently, our combined computational and experimental approach delivers a robust understanding of the direction of charge separation along with critical time-resolved insights into the evolution of charge transport phenomena in this model heterojunction photocatalyst.

Novel CoFe2O4@ZnO-CeO2 ternary nanocomposite: Sonochemical green synthesis using Crataegus microphylla extract, characterization and their application in catalytic and antibacterial activities

In this study, CoFe₂O₄@ZnO-CeO₂ magnetic nanocomposite (CoFe@Zn-Ce MNC) was successfully prepared by facile sonochemical method for the first time. CoFe@Zn-Ce MNC was obtained by green and cost-effective process in the presence of Crataegus microphylla (C. microphylla) fruit extract. Influence of some parameters like capping agents (C. microphylla, SDS and CTAB), sonication time (10, 30 and 60 min) and sonication power (40, 60 and 80 W) were studied to achieve optimum condition. The as-obtained products were characterized by FT-IR, FESEM, TEM, DRS, VSM, EDS, TGA and XRD analysis. Results showed that high magnetic properties (20.38 emug^-1), 70-80 nm size and spherical morphology were unique characteristics of synthesized nanocomposite. Antibacterial activity of CoFe@Zn-Ce MNC was examined against E. coli, P. aeruginoss and S. aureus bacteria. Among theme, S. aureus as gram-positive bacteria showed excellent antibacterial activity. Furthermore, photocatalytic performance of the CoFe@Zn-Ce MNC was investigated by degradation of humic acid (HA) molecules under visible and UV light irradiations. The influence of morphology of products and incorporation of cerium oxide with CoFe₂O₄@ZnO on photocatalytic activity of CoFe₂O₄@ZnO was performed. After 100 min illumination, the decomposition of HA pollutant by magnetic nanocomposite were 97.2% and 72.4% under exposure of UV and visible light irradiations, respectively. Also, CoFe@Zn-Ce MNC demonstrated high stability in the cycling decomposition experiment after six times cycling runs.

Co(II/III) Complexes with Benzoxazole and Benzothiazole Ligands as Efficient Heterogenous Photocatalysts for Organic Dyes Degradation

The problem of pollution in the current world is growing, however people’s awareness of environmental protection and ecology is also increasing. The aim of the study is to present three new Schiff base compounds with Co(II/III) ions and to assess their photocatalytic activity. The study was supported by cyclic voltammetry technique. In due course the complex 2 revealed as the most effective in AR18 degradation, even more than commercially available TiO2. The search for new photocatalysts able to decompose harmful organic dyes into environmentally friendly basic substances is becoming a new trend in the area of chemistry development.

Preparation of CdS-TiO2-Based Palladium Heterogeneous Nanocatalyst by Solvothermal Route and Its Catalytic Activity for Reduction of Nitroaromatic Compounds

In this study, bare CdS nanoparticles (NPs) were prepared by solvothermal method using CdCl₂(3-methylbenzaldehyde thiosemicarbazone)₂ as a single-source molecular precursor in the presence of ethylene glycol. Further, these CdS NPs were used for the preparation of binary (CdS-TiO₂) and ternary (CdS-TiO₂/Pd) heterogeneous nanocatalysts. Characterization of the as-prepared nanocatalysts has been carried out using different techniques such as powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), UV-visible diffuse reflectance spectroscopy, and photoluminescence studies. The peak observed at 2θ = 39.5° in XRD confirms the successful doping of noble metal (Pd) on the surface of CdS-TiO₂ nanocatalyst, which is well supported by Raman analysis. From FESEM and TEM analyses, mixed morphology has been observed and elemental composition was confirmed by energy-dispersive X-ray spectroscopy elemental mapping. Furthermore, the as-prepared bare CdS NPs, binary CdS-TiO₂, and ternary CdS-TiO₂/Pd heterogeneous nanocatalysts were used for the reductive transformation of various nitroaromatic compounds to their corresponding aromatic amines at room temperature. It has been observed that among all of the catalysts, ternary CdS-TiO₂/Pd heterogeneous nanocatalyst has excellent catalytic property to reduce all nitroaromatic compounds in very short time span.

Stepwise Synthesis of Au@CdS-CdS Nanoflowers and Their Enhanced Photocatalytic Properties

Fabrication of hybrid nanostructures with complex morphologies and high photocatalytic activity is a difficult challenge because these particles require extremely high preparation skills and are not always practical. Here, hierarchical flower-like Au@CdS-CdS nanoparticles (Au@CdS-CdS nanoflowers) have been synthesized using a stepwise method. The Au@CdS-CdS nanoflowers are consisted of Au core, CdS shell, and CdS nanorods. The UV-Vis absorption range of the Au@CdS-CdS nanoflowers reaches up to 850 nm which covers the whole visible range (400-760 nm). Photoinduced charge transfer property of Au@CdS-CdS nanoflowers was demonstrated using photoluminescence (PL) spectroscopy. Compared to CdS counterparts and Au@CdS counterparts, Au@CdS-CdS nanoflowers demonstrated the highest photocatalytic degradation rate under irradiation of λ = 400-780 nm and λ = 600-780 nm, respectively. Based on structure and morphology analyses, we have proposed a possible formation mechanism of the hybrid nanostructure which can be used to guide the design of other metal-semiconductor nanostructures with complex morphologies.

Fabrication of nanocomposite photocatalyst CuBi2O4/Bi3ClO4 for removal of acid brown 14 as water pollutant under visible light irradiation

In the present study, CuBi₂O₄/Bi₃ClO₄ nanocomposites have been fabricated via an improved Pechini sol-gel process using the mixtures of various gelling agents and polybasic acids. This work shows that by controlling the reaction conditions such as kind of polybasic acids, gelling agents, pH and mole ratio of polybasic acid to total metals, the CuBi₂O₄/Bi₃ClO₄ nanocomposites with ultrafine sphere-like, irregular polyhedral-like, plate-like and cubic-like morphologies were prepared. The phase, elemental composition, morphology and optical characteristics of as-synthesized CuBi₂O₄/Bi₃ClO₄ nanostructures were analyzed utilizing UV-Vis, FESEM, TEM, HRTEM, FT-IR, XRD, TOC and EDS techniques. Furthermore, the CuBi₂O₄/Bi₃ClO₄ nanocomposites exhibited excellent TOC removal (75%) and photocatalytic activity (92%) to photodegradation of acid brown 14 azo dye as water pollutants under visible light irradiation. The excellent degradation activity of CuBi₂O₄/Bi₃ClO₄ photocatalyst can be attributed to the strong visible light absorption, high charge separation efficiency, fine particle size distribution and proper band gap of the nanocomposite. In addition, the reliable photocatalytic mechanism was discussed on the basis of the radical trapping study, which revealed the h⁺ and O₂^- radicals were the prevailing active species in the photocatalytic process.

Role of Dimensionality for Photocatalytic Water Splitting: CdS Nanotube versus Bulk Structure

Using state-of-the-art density functional theoretical calculations, we have modelled a facetted CdS nanotube (NT) catalyst for photocatalytic water splitting. The overall photocatalytic activity of the CdS photocatalyst has been predicted based on the electronic structures, band edge alignment, and overpotential calculations. For comparisons, we have also investigated the water splitting process over bulk CdS. The band edge alignment along with the oxygen evolution reaction/hydrogen evolution reaction (OER/HER) mechanism studies help us find out the effective overpotential for the overall water splitting on these surfaces. Our study shows that the CdS NT has a highly stabilized valence band edge compared to that of bulk CdS owing to strong p-d mixing. The highly stabilized valence band edge is important for the hole-transfer process and reduces the risk of electron-hole recombination. CdS nanotube requires less overpotential for water oxidation reaction than the bulk CdS. Our findings suggest that the efficiency of the water oxidation/reduction process further improves in CdS as we reduce its dimensionality, that is going from bulk CdS to one-dimensional nanotube. Furthermore, the stabilized valence band edge of CdS nanotube also improves the photostability of CdS, which is a problem for bulk CdS.

Easily Recoverable, Micrometer-Sized TiO2 Hierarchical Spheres Decorated with Cyclodextrin for Enhanced Photocatalytic Degradation of Organic Micropollutants

Micrometer-sized titanium dioxide hierarchical spheres (TiO₂-HS) were assembled from nanosheets to address two common limitations of photocatalytic water treatment: (1) inefficiency associated with scavenging of oxidation capacity by nontarget water constituents and (2) energy-intensive separation and recovery of the photocatalyst slurry. These micrometer-sized spheres are amenable to low-energy separation, and over 99% were recaptured from both batch and continuous flow reactors using microfiltration. Using nanosheets as building blocks resulted in a large specific surface area-3 times larger than that of commercially available TiO₂ powder (Evonik P25). Anchoring food-grade cyclodextrin onto TiO₂-HS (i.e., CD-TiO₂-HS) provided hydrophobic cavities to entrap organic contaminants for more effective utilization of photocatalytically generated reactive oxygen species. CD-TiO₂-HS removed over 99% of various contaminants with dissimilar hydrophobicity (i.e., bisphenol A, bisphenol S, 2-naphthol, and 2,4-dichlorophenol) within 2 h under a low-intensity UVA input (3.64 × 10^-6 einstein/L/s). As with other catalyst (including TiO₂ slurry), periodic replacement or replenishment would be needed to maintain high treatment efficiency (e.g., we demonstrate full reactivation through simple reanchoring of CD). Nevertheless, this task would be offset by significant savings in photocatalyst separation. Thus, CD-TiO₂-HS is an attractive candidate for photocatalytic water and wastewater treatment of recalcitrant organic pollutants.

Cr(VI) remediation from aqueous environment through modified-TiO2-mediated photocatalytic reduction

Cr(VI) exhibits cytotoxic, mutagenic and carcinogenic properties; hence, effluents containing Cr(VI) from various industrial processes pose threat to aquatic life and downstream users. Various treatment techniques, such as chemical reduction, ion exchange, bacterial degradation, adsorption and photocatalysis, have been exploited for remediation of Cr(VI) from wastewater. Among these, photocatalysis has recently gained considerable attention. The applications of photocatalysis, such as water splitting, CO2 reduction, pollutant degradation, organic transformation reactions, N2 fixation, etc., towards solving the energy crisis and environmental issues are briefly discussed in the Introduction of this review. The advantages of TiO2 as a photocatalyst and the importance of its modification for photocatalytic reduction of Cr(VI) has also been addressed. In this review, the photocatalytic activity of TiO2 after modification with carbon-based advanced materials, metal oxides, metal sulfides and noble metals towards reduction of Cr(VI) was evaluated and compared with that of bare TiO2. The photoactivity of dye-sensitized TiO2 for reduction of Cr(VI) was also discussed. The mechanism for enhanced photocatalytic activity was highlighted and attributed to the resultant properties, namely, effective separation of photoinduced charge carriers, extension of the light absorption range and intensity, increase of the surface active sites, and higher photostability. Advantages and limitations for photoreduction of Cr(VI) over modified TiO2 are depicted in the Conclusion. The various challenges that restrict the technology from practical applications in remediation of Cr(VI) from wastewater were addressed in the Conclusion section as well. The future perspectives of the field presented in this review are focused on the development of whole-solar-spectrum responsive, TiO2-coupled photocatalysts which provide efficient photocatalytic reduction of Cr(VI) along with their good recoverability and recyclability.

CdS nanosphere-decorated hollow polyhedral ZCO derived from a metal-organic framework (MOF) for effective photocatalytic water evolution

Semiconductor nanostructures have received considerable attention in the field of photocatalytic hydrogen evolution. However, eco-friendly, high efficiency, and low-cost semiconductor materials are still desired. In consideration of this, herein, we design a new and economic noble-metal-free CdS/Zn_xCo_3-xO₄ (CdS/ZCO) nanohybrid photocatalyst using a metal-organic framework (MOF) template, which is a framework structure composed of organic ligands and metal ion nodes with different numbers of connections. The as-prepared CdS/ZCO composites with a large specific surface area and porous hollow structure exhibit remarkable catalytic activity and high stability for hydrogen generation. The hydrogen evolution rate is about 3978.6 μmol g^-1 h^-1 with lactic acid as the sacrificial agent when the optimized amount of CdS nanoparticles (30 wt%) is decorated on the ZCO frame, and the production efficiency of H₂ for CdS/ZCO is 4 times higher than that for CdS nanospheres or CdS/Co₃O₄. The significantly enhanced photocatalytic activity of CdS/ZCO is attributed to the efficient charge separation and transfer between the phase boundary of CdS and ZCO. In addition, the composites exhibit better hydrogen production in lactic acid than in methanol, and the remarkable catalytic activity and high stability of the CdS/ZCO composites for hydrogen evolution indicate that MOF-based composite materials have potential application prospects in energy conversion.

Synthesis of bare and surface modified TiO2 nanoparticles via a single source precursor and insights into their interactions with serum albumin

Choice of an apt surface modifier to design a more efficient TiO₂ NP based photosensitizer for PDT applications.

A transparent CdS@TiO2 nanotextile photoanode with boosted photoelectrocatalytic efficiency and stability

In the present work, we report the exploration of a transparent CdS@TiO₂ nanotextile photoanode with boosted photoelectrocatalytic (PEC) efficiency and stability, by the controllable coating of an amorphous TiO₂ ultrathin layer via the atomic layer deposition (ALD) technique. The optimal CdS@TiO₂ nanotextile photoanode with a 3.5 nm TiO₂ ultrathin layer exhibits a photocurrent density of 1.8 mA cm^-2 at 0 V vs. RHE, which is 11 times higher than that of the pristine CdS counterpart. The photocatalytic H₂ evolution rate of CdS@TiO₂ ranges up to 47.5 mmol g^-1 h^-1, which is superior to those reported for one-dimensional CdS-based counterparts. Moreover, the photocurrent of CdS@TiO₂ nanotextile photoanodes shows only 9% decay after 9 h, suggesting its profoundly enhanced PEC stability, in comparison with that of pristine CdS photoanodes (almost down to zero after 3 hours). It is verified that the introduced TiO₂ nanoshells could limit the charge recombination, facilitate the charge separation, reduce the charge transfer resistance, and enhance the wettability of the electrodes, resulting in their significantly enhanced PEC performance.

One-pot Synthesis of CdS Irregular Nanospheres Hybridized with Oxygen-Incorporated Defect-Rich MoS2 Ultrathin Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Robust and highly active photocatalysts, CdS@MoS₂, for hydrogen evolution were successfully fabricated by one-step growth of oxygen-incorporated defect-rich MoS₂ ultrathin nanosheets on the surfaces of CdS with irregular fissures. Under optimized experimental conditions, the CdS@MoS₂ displayed a quantum yield of ∼24.2% at 420 nm and the maximum H₂ generation rate of ∼17203.7 umol/g/h using Na₂S-Na₂SO₃ as sacrificial agents (λ ≥ 420 nm), which is ∼47.3 and 14.7 times higher than CdS (∼363.8 μmol/g/h) and 3 wt % Pt/CdS (∼1173.2 μmol/g/h), respectively, and far exceeds all previous hydrogen evolution reaction photocatalysts with MoS₂ as co-catalysts using Na₂S-Na₂SO₃ as sacrificial agents. Large volumes of hydrogen bubbles were generated within only 2 s as the photocatalysis started, as demonstrated by the photocatalytic video. The high hydrogen evolution activity is attributed to several merits: (1) the intimate heterojunctions formed between the MoS₂ and CdS can effectively enhance the charge transfer ability and retard the recombination of electron-hole pairs; and (2) the defects in the MoS₂ provide additional active S atoms on the exposed edge sites, and the incorporation of O reduces the energy barrier for H₂ evolution and increases the electric conductivity of the MoS₂. Considering its low cost and high efficiency, this highly efficient hybrid photocatalysts would have great potential in energy-generation and environment-restoration fields.

Preparation of TiO2–ZrO2/Au/CeO2 hollow sandwich-like nanostructures for excellent catalytic activity and thermal stability

This work reports a novel type of sandwich-like hollow Au-based nanocatalyst, including a TiO₂–ZrO₂ shell, a hollow CeO₂ core and Au nanoparticles of 2–5 nm.