Salt-responsive self-assembly of luminescent hydrogel with intrinsic gelation-enhanced emission

A method for in situ self-assembly of the catalytic peptide in enzymatic compartments of glucan particles

Drawing inspiration from cellular compartmentalization, enzymatic compartments play a pivotal role in bringing enzymes and substrates into confined environments, offering heightened catalytic efficiency and prolonged enzyme lifespan. Previously, we engineered bioinspired enzymatic compartments, denoted as TPE-Q18H@GPs, achieved through the spatiotemporally controllable self-assembly of the catalytic peptide TPE-Q18H within hollow porous glucan particles (GPs). This design strategy allows substrates and products to freely traverse, while retaining enzymatic aggregations. The confined environment led to the formation of catalytic nanofibers, resulting in enhanced substrate binding affinity and a more than two-fold increase in the second-order kinetic constant (kcat/Km) compared to TPE-Q18H nanofibers in a dispersed system. In this work, we will introduce how to synthesize the above-mentioned enzymatic compartments using salt-responsive catalytic peptides and GPs.

Effects of solvent conditions on the self-assembly of heterotrimeric collagen-like peptide (CLP) triple helices: a coarse-grained simulation study

We perform coarse-grained (CG) molecular dynamics (MD) simulations to investigate the self-assembly of collagen-like peptide (CLP) triple helices into fibrillar structures and percolated networks as a function of solvent quality. The focus of this study is on CLP triple helices whose strands are different lengths (i.e., heterotrimers), leading to dangling 'sticky ends'. These 'sticky ends' are segments of the CLP strands that have unbonded hydrogen-bonding donor/acceptor sites that drive heterotrimeric CLP triple helices to physically associate with one another, leading to assembly into higher-order structures. We use a validated CG model for CLP in implicit solvent and capture varying solvent quality through changing strength of attraction between CG beads representing the amino acids in the CLP strands. Our CG MD simulations show that, at lower CLP concentrations, CLP heterotrimers assemble into fibrils and, at higher CLP concentrations, into percolated networks. At higher concentrations, decreasing solvent quality causes (i) the formation of heterogeneous network structures with a lower degree of branching at network junctions and (ii) increases in the diameter of network strands and pore sizes. We also observe a nonmonotonic effect of solvent quality on distances between network junctions due to the balance between heterotrimer end-end associations driven by hydrogen bonding and side-side associations driven by worsening solvent quality. Below the percolation threshold, we observe that decreasing solvent quality leads to the formation of fibrils composed of multiple aligned CLP triple helices, while the number of 'sticky ends' governs the spatial extent (radius of gyration) of the assembled fibrils.

Control of the stepwise self-assembly process of a pH-responsive amphiphilic 4-aminoquinoline-tetraphenylethene conjugate

Controlling the kinetic processes of self-assembly and switching their kinetic properties according to the changes in external environments are crucial concepts in the field of supramolecular polymers in water for biological and biomedical applications. Here we report a new self-assembling amphiphilic 4-aminoquinoline (4-AQ)-tetraphenylethene (TPE) conjugate that exhibits kinetically controllable stepwise self-assembly and has the ability of switching its kinetic nature in response to pH. The self-assembly process of the 4-AQ amphiphile comprises the formation of sphere-like nanoparticles, a transition to short nanofibers, and their growth to long nanofibers with ∼1 μm length scale at room temperature (RT). The timescale of the self-assembly process differs according to the pH-responsivity of the 4-AQ moiety in a weakly acidic to neutral pH range. Therefore, after aging for 24 h at RT, the 4-AQ amphiphile forms metastable short nanofibers at pH 5.5, while it forms thermodynamically favored long nanofibers at pH 7.4. Moreover, the modulation of nanofiber growth proceeding spontaneously at RT was achieved by switching the kinetic pathway through changing the pH between 7.4 and 5.5.

Bioinspired enzymatic compartments constructed by spatiotemporally confined in situ self-assembly of catalytic peptide

Enzymatic compartments, inspired by cell compartmentalization, which bring enzymes and substrates together in confined environments, are of particular interest in ensuring the enhanced catalytic efficiency and increased lifetime of encapsulated enzymes. Herein, we constructed bioinspired enzymatic compartments (TPE-Q18H@GPs) with semi-permeability by spatiotemporally controllable self-assembly of catalytic peptide TPE-Q18H in hollow porous glucan particles (GPs), allowing substrates and products to pass in/out freely, while enzymatic aggregations were retained. Due to the enrichment of substrates and synergistic effect of catalytic nanofibers formed in the confined environment, the enzymatic compartments exhibited stronger substrate binding affinity and over two-fold enhancement of second-order kinetic constant (k_cat/K_m) compared to TPE-Q18H nanofibers in disperse system. Moreover, GPs enabled the compartments sufficient stability against perturbation conditions, such as high temperature and degradation. This work opens an intriguing avenue to construct enzymatic compartments using porous biomass materials and has fundamental implications for constructing artificial organelles and even artificial cells.

AIE-active macromolecules: designs, performances, and applications

Aggregation-induced emission (AIE) macromolecules as emerging luminescent materials gained increasing attention owing to their good processability, high brightness, wide functionality, and smart responsiveness, with great potential in many fields.

Aggregation-Induced Emission-Active Gels: Fabrications, Functions, and Applications

Chromophores that exhibit aggregation-induced emission (i.e., aggregation-induced emission luminogens [AIEgens]) emit intense fluorescence in their aggregated states, but show negligible emission as discrete molecular species in solution due to the changes in restriction and freedom of intramolecular motions. As solvent-swollen quasi-solids with both a compact phase and a free space, gels enable manipulation of intramolecular motions. Thus, AIE-active gels have attracted significant interest owing to their various distinctive properties and promising application potential. Herein, a comprehensive overview of AIE-active gels is provided. The fabrication strategies employed are detailed, and the applications of AIEgens are summarized. In addition, the gel functions arising from the AIE moieties are revealed, along with their structure-property relationships. Furthermore, the applications of AIE-active gels in diverse areas are illustrated. Finally, ongoing challenges and potential means to address them are discussed, along with future perspectives on AIE-active gels, with the overall aim of inspiring research on novel materials and ideas.

Aggregation-Induced Emission Fluorescent Gels: Current Trends and Future Perspectives

The development of fluorescent gels, if not the current focus, is at the center of recent efforts devoted to the invention of a new generation of gels. Fluorescent gels have numerous properties that are intrinsic to the gel structure, with additional light-emitting properties making them attractive for different applications. This review focuses on current studies associated with the development of fluorescent gels using aggregation-induced emission fluorophores (AIEgens) to ultimately suggest new directions for future research. Here, we discuss major drawbacks of the methodologies used frequently for the fabrication of fluorescent gels using traditional fluorophores compared to those using AIEgens. The fabrication strategies to develop AIE-based fluorescent gels, including physical mixing, soaking, self-assembly, noncovalent interactions, and permanent chemical reactions, are discussed thoroughly. New and recent findings on developing AIE-active gels are explained. Specifically, physically prepared AIE-based gels including supramolecular, ionic, and chemically prepared AIE-based gels are discussed. In addition, the intrinsic fluorescent properties of natural gels, known as clustering-triggered fluorescent gel, and new and recent relevant findings published in peer-reviewed journals are explained. This review also revealed the biomedical applications of AIE-based fluorescent hydrogels including drug delivery, biosensors, bioimaging, and tissue engineering. In conclusion, the current research situation and future directions are identified.

Co-cross-linked lanthanide-containing nanocomposite luminescent hydrogels

We report a hydrogel with co-cross-linked networks synthesized via in situ polymerization of NIPA, LAPONITE® and lanthanide complex, endowing the hydrogel with thermoresponsive mechanical and luminescent performance.

Stimulus-responsive luminescent hydrogels: Design and applications

Luminescent hydrogels are emerging soft materials with applications in photoelectric, biomedicine, sensors and actuators, which are fabricated via covalently conjugation of luminophors to hydrogelators or physical loading of luminescent organic/inorganic materials into hydrogel matrices. Due to the intrinsic stimulus-responsiveness for hydrogels such as thermo-, pH, ionic strength, light and redox, luminescent hydrogels could respond to external physical or chemical stimuli through varying the luminescent properties such as colors, fluorescent intensity and so on, affording diverse application potential in addition to the pristine individual hydrogels or luminescent materials. Based on the rapid development of such area, here we systematically summarize and discuss the design protocols, properties as well as the applications of stimulus-responsive luminescent hydrogels. Because of the stimuli-responsiveness, biocompatibility, injectable and controllability of luminescent hydrogels, they are widely used as functional smart materials. We illustrate the applications of luminescent hydrogels. The future developments about luminescent hydrogels are also presented.

Effects of fluoro substitutions and electrostatic interactions on the self-assembled structures and hydrogelation of tripeptides: tuning the mechanical properties of co-assembled hydrogels

A series of FFK tripeptides capped with phenylacetic acid of various fluoro-substitutions at the N-terminus has been synthesized and examined for self-assembly under aqueous conditions. The material properties of the FFK tripeptides dramatically changed from precipitate to hydrogel phase upon increasing the number of fluorine atoms. Peptides linked with benzyl (B-FFK) or monofluoro-benzyl (MFB-FFK) groups rapidly form solid precipitates under physiological pH conditions. The trifluoro-decorated compound (TFB-FFK) self-assembled into a metastable hydrogel which slowly transformed into a solid precipitate upon standing. A stable hydrogel formation was noticed in the case of the pentafluorobenzyl-diphenylalanyllysine (PFB-FFK) compound. TEM analysis indicates that the PFB-FFK peptide assembled into twisted nanofibril structures, which are predominantly stabilized by strong quadrupole π-stacking interactions and electrostatic interactions of amino acid side chains. Furthermore, the combination of PFB-FFK and PFB-FFD peptides was also investigated for hydrogelation and the self-assembly of such systems resulted in the formation of untwisted 1D nanofibril structures. Supramolecular coassembled hydrogels of variable stiffness have also been achieved by modulating the concentration of the peptide components, which was evident from the rheological analysis. Such low molecular weight (LMW) peptide materials with tuneable mechanical properties might be a potential material for a wide range of applications in nanotechnology and biotechnology.

Self-Assembly of Tetraphenylethylene-Based Amphiphiles in Aqueous Methanol Solution into Two-Dimensional Chiral Sheets for Enantioselective Sorption

Most synthetic building blocks self-assemble into one- or three-dimensional architectures. However, fewer examples have been reported on the aggregation of amphiphiles to form optically-active two-dimensional (2D) structures. Herein, we report the self-assembly of tetraphenylethylene (TPE)-containing hydrophilic dendrons into 2D sheet structures in aqueous methanol solution. TEM and AFM investigations showed that the self-assembly of disubstituted TPE generates helical nanofibers as an intermediate structure which, in turn, laterally associate into a chiral sheet structure with a thickness of 4.6 nm, whereas tetrasubstituted TPE self-assembles into a nonchiral sheet structure with a thickness of 3.8 nm. In great contrast to the nonchiral sheets, the chiral sheets are able to preferentially absorb the d-enantiomer in a racemic phenylalanine derivative solution accompanied by fluorescence enhancement, thus indicating that the single-layered chiral sheets act as an enantioselective membrane that can be used for fluorescence sensing.

Detection of Bacterial Alkaline Phosphatase Activity by Enzymatic In Situ Self-Assembly of the AIEgen-Peptide Conjugate

Abnormal levels of alkaline phosphatase (ALP) activity are associated with various diseases, and many ALP probes have been developed to date. However, the development of ALP-sensitive probes for living cells, especially for the detection of bacterial ALP, remains challenging because of the complex and dynamic context. In this study, we constructed the first fluorescent probe (TPEPy-pY) for sensing bacterial ALP activity. TPEPy-pY is an AIEgen-peptide conjugate with property of aggregation-induced emission (AIE) and could turn on its fluorescence by ALP-catalyzed in situ self-assembly of the probe. The probe shows excellent selectivity and sensitivity for ALP activity, with a detection limit of 6.6 × 10^-3 U mL^-1. TPEPy-pY performs well in detection and in situ imaging of bacterial ALP activity against E. coli. Also, the detection does not require tedious washing steps and takes approximately 1 h, which is advantageous over commercial ALP kits. Therefore, the proposed strategy paved a new avenue for bacterial ALP detection, and we envision that more self-assembling fluorescent probes will be designed with higher sensitivity in the near future.

Supramolecular materials based on AIE luminogens (AIEgens): construction and applications

The emergence of aggregation-induced emission luminogens (AIEgens) has significantly stimulated the development of luminescent supramolecular materials because their strong emissions in the aggregated state have resolved the notorious obstacle of the aggregation-caused quenching (ACQ) effect, thereby enabling AIEgen-based supramolecular materials to have a promising prospect in the fields of luminescent materials, sensors, bioimaging, drug delivery, and theranostics. Moreover, in contrast to conventional fluorescent molecules, the configuration of AIEgens is highly twisted in space. Investigating AIEgens and the corresponding supramolecular materials provides fundamental insights into the self-assembly of nonplanar molecules, drastically expands the building blocks of supramolecular materials, and pushes forward the frontiers of supramolecular chemistry. In this review, we will summarize the basic concepts, seminal studies, recent trends, and perspectives in the construction and applications of AIEgen-based supramolecular materials with the hope to inspire more interest and additional ideas from researchers and further advance the development of supramolecular chemistry.

Beyond Fmoc: a review of aromatic peptide capping groups

Self-assembling short peptides have attracted widespread interest due to their tuneable, biocompatible nature and have potential applications in energy materials, tissue engineering, sensing and drug delivery. The hierarchical self-assembly of these peptides is highly dependent on the selection of not only amino acid sequence, but also the capping group which is often employed at the N-terminus of the peptide to drive self-assembly. Although the Fmoc (9H-fluorenylmethyloxycarbonyl) group is commonly used due to its utility in solid phase peptide synthesis, many other aromatic capping groups have been reported which yield functional, responsive materials. This review explores recent developments in the utilisation of functional, aromatic capping groups beyond the Fmoc group for the creation of redox-responsive, fluorescent and drug delivering hydrogel scaffolds.

Physically Cross-Linked Hydrogel Based on Phenyl-1,3,5-triazine: Soft Scaffold with Aggregation-Induced Emission

A phenyltriazine compound has been used for the first time as a monomer in the construction of a hydrogel. This physically cross-linked soft material showed blue fluorescence when excited under UV-light. Polymer formation and intermolecular H-bonds arising from triazine moieties operate as aggregation-induced emission (AIE) mechanisms. The combination of soft materials and AIE properties expands the applications of these materials. As a proof of concept, two luminescent dyes have been incorporated into the hydrogel to produce a white-light-emitting material.

Self-healing hydrogel with cross-linking induced thermo-response regulated light emission property

With increasing attention paid to smart materials, self-healing hydrogels with thermo-responses have been greatly developed in the past several years. At the same time, fluorescent or light emitting polymers have been studied for use as bioimaging tools and drug delivery vehicles. In this research, thermo-responsive self-healing hydrogels with aggregation-induced emission (AIE) property were prepared from tetraphenylethylene (TPE) containing TPE-poly(N,N-dimethylacrylamide-stat-Diacetone acrylamide) [TPE-P(DMA-stat-DAA)] cross-linked by diacylhydrazide. In addition to self-healing based on reversible acylhydrazone bond, the copolymer and hydrogels showed thermo-responses. The lower critical solution temperature (LCST) of the hydrogels was regulated to body temperature. Based on the AIE property of the TPE unit, the hydrogels showed an enhanced light emitting property above the LCST, which was regulated by temperature change. The in vitro cytotoxicity experiment showed that the hydrogels are not toxic, and the DOX release rate can be enhanced by low pH values, which endowed this kind of thermo-responsive light emitting hydrogel with great potential for applications in bio-diagnosis, drug delivery, artificial organs with light sensitive detection, etc.

Super tough bilayer actuators based on multi-responsive hydrogels crosslinked by functional triblock copolymer micelle macro-crosslinkers

Intelligent hydrogels responsive to external stimuli have been widely studied due to their great potentials for applications in artificial muscles, soft robotics, sensors and actuators. However, the weak mechanical properties, narrow response range, and slow response speed of many responsive hydrogels have hindered practical applications. In this paper, tough multi-responsive hydrogels were synthesized by using vinyl-functionalized triblock copolymer micelles as macro-crosslinkers and N-isopropyl acrylamide (NIPAM) and acrylamide (AAm) or 2-(dimethylamino)ethyl methacrylate (DMAEMA) and 2-acrylamido-2-methyl-1-propane-sulfonic acid (AMPS) as monomers. The P(NIPAM-co-AAm) hydrogels presented tensile strength of up to 1.6 MPa and compressive strength of up to 127 MPa and were tunable by changing their formulations. Moreover, the lower critical solution temperature (LCST) of the thermosensitive hydrogels was manipulated in a wide range by changing the molar ratio of NIPAM to AAm. Responsive hydrogel bilayers were fabricated through a two-step synthesis. A second layer of P(DMAEMA-co-AMPS) was synthesized on the first P(NIPAM-co-AAm) layer to obtain a bilayer hydrogel, which was responsive to temperature, pH and ionic strength changes to undergo fast and reversible shape transformation in a few minutes. This kind of strong and tough multi-responsive hydrogel device has broad prospects in soft actuators.

Aggregation-Induced Emission for Visualization in Materials Science

Fluorescent imaging techniques have attracted much attention as a powerful tool to realize the visualization of structural and morphological evolution of various materials. However, the traditional fluorescent dyes usually suffered from aggregation-caused quenching, which severely limits the visualization results. In contrast, aggregation-induced emission (AIE) molecules with high quantum yields in the condensed state showed great opportunities for imaging techniques. In this feature article, recent progresses in visualization with AIE molecules are discussed. Assembly processes including crystallization, gelation process, and dissipative assembly have been observed. To better study information obtained regarding the processes, visualization during reactions, phase transitions, and molecular motions are successfully presented. Based on these successes, AIE molecules were further applied for phase recognition, macro-dispersion evaluation, and damage detection. Finally, we also present the outlook and perspectives, in our opinion, for the development of visualization by AIE molecules.

Tumor targeting with DGEA peptide ligands: a new aromatic peptide amphiphile for imaging cancers

A novel AIE-active self-assembled bioprobe TPE-FDGEA has been developed for selective cancer cell imaging.

Insights into the aggregation-induced emission of 1,8-naphthalimide-based supramolecular hydrogels

The study of aggregation-induced emission (AIE) of a series of 1,8-naphthalimide derivatives in aqueous media is reported herein. Some of these molecules constitute the first examples of 1,8-naphthalimide-containing amino acid derivatives that form hydrogels with excellent photophysical and mechanical properties. The present study provides further insights for the rational design of water-compatible stimuli-responsive photonic materials presenting AIE. AIE was quantitatively evaluated by measuring the fluorescence quantum yields of the molecules. Gelators 1 and 2 exhibit self-assembled fibrillar morphologies and present the best performance regarding the AIE effect, showing a remarkable enhancement in fluorescence intensity of 4700% and reaching a notable fluorescence quantum yield (Φf) of 30%. Non-gelator molecules 6 and 7 form nanoparticles, which also present AIE, but with emissions corresponding to their excimers. Therefore, the AIE intensity and wavelength are regulated by the type of aggregate morphology: fibers, nanoparticles or soluble species.

Using Aggregation-Induced Emission to Understand Dipeptide Gels

We describe the formation of structured liquids and gels from a functionalised dipeptide based on tetraphenylethylene. Tetraphenylethylene is well-known to be able to undergo aggregation-induced emission. We use the emission data to understand the behaviour of the dipeptide in water under a variety of conditions. The dipeptide forms viscous solutions at high pH. Gels can be formed by a pH-trigger, but syneresis occurs. Addition of a calcium salt also leads to a gel with slight syneresis. Addition of sodium chloride leads to a self-supporting material, but this is not a true gel from the rheological perspective. From the emission data, we infer that there are limited structural changes on addition of sodium chloride or acid, but there are significant changes in molecular packing when the gel is formed by addition of a calcium salt.

Fluorescent supramolecular hydrogels self-assembled from tetraphenylethene (TPE)/single amino acid conjugates

TPE-Ser molecules exhibit non-covalent interactions necessary for hydrogelation under physiological pH conditions.

Temperature-regulated aggregation-induced emissive self-healable hydrogels for controlled drug delivery

Thermoresponsive copolymers TPE-[P(DMA-stat-DAA)]₂ containing a tetraphenylethylene (TPE) moiety and a ketone group were synthesized.

Virus-Inspired Self-Assembled Nanofibers with Aggregation-Induced Emission for Highly Efficient and Visible Gene Delivery

High-efficiency gene transfer and suitably low cytotoxicity are the main goals of gene transfection systems based on nonviral vectors. In addition, it is desirable to track the gene transfer process in order to observe and explain the mechanism. Herein, inspired by viral structures that are optimized for gene delivery, we designed a small-molecule gene vector (TR4) with aggregation-induced emission properties by capping a peptide containing four arginine residues with tetraphenylethene (TPE) and a lipophilic tail. This novel vector can self-assemble with plasmid DNA to form nanofibers in solution with low cytotoxicity, high stability, and high transfection efficiency. pDNA@TR4 complexes were able to transfect a variety of different cell lines, including stem cells. The self-assembly process induces bright fluorescence from TPE, which makes the nanofibers visible by confocal laser scanning microscopy (CLSM). This allows us for the tracking of the gene delivery process.

A novel nanostructured supramolecular hydrogel self-assembled from tetraphenylethylene-capped dipeptides

Herein, we report a tetraphenylethylene-diglycine (TPE-GG) hydrogelator from a systematic study of TPE-capped dipeptides with various amphiphilic properties. From a chemical design, we found that the hydrogelation of TPE-GG molecules can be utilized to generate supramolecular nanostructures with a large TPE-based nanobelt width (∼300 nm) and lateral dimension ratio (>30 fold). In addition, TPE-GG has the lowest molecular weight and minimum number of atoms compared to any TPE-capped peptide hydrogelator reported to date. This minimal self-assembled hydrogelator can fundamentally achieve the gel features compared with other TPE-capped peptides. A combined experimental and computational study indicates the π-π interactions, electrostatic interactions and hydrogen-bonding interactions are the major driving forces behind the formation of self-assembled nanobelts. This study demonstrates the importance of structure-property relationships and provides new insights into the design of supramolecular nanomaterials.

Synthesis and biomedical applications of fluorescent nanogels

Fluorescent nanogel is an innovative biomedical material with hydroscopicity, degradability, and responsiveness.

Aggregation-induced emission polymer nanoparticles with pH-responsive fluorescence

A convenient and efficient method was developed to prepare stable polymer nanoparticles with varied morphology and pH-responsive AIE properties, based on the amphiphilic block copolymer self-assembly, crosslinking, and post-functionalization techniques.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Probe-inspired nano-prodrug with dual-color fluorogenic property reveals spatiotemporal drug release in living cells

The versatility of the fluorescent probes inspires us to design fluorescently traceable prodrugs, which enables tracking the drug delivery kinetics in living cells. Herein, we constructed a self-indicating nanoprodrug with two fluorescent moieties, an aggregation-induced emission molecule (tetraphenylethylene, TPE) and a luminant anticancer drug (doxorubicin, DOX), with a pH-responsive linker between them. Except when a low pH environment is encountered, an energy-transfer relay (ETR) occurs and inactivates the fluorescence of both, showing a dark background. Otherwise, the ETR would be interrupted and evoke a dual-color fluorogenic process, giving distinct fluorogenic read out. By observing the dual-color fluorogenic scenario, we captured the kinetics of the drug release process in living cells. Because the separated TPE and DOX are both fluorescent but have a distinct spectrum, by examining the spatiotemporal pattern of TPE and DOX, we were able to precisely disclose the drug-releasing site, the releasing time, the destinations of the carriers, and the executing site of the drugs at subcellular level. Furthermore, different intracellular drug release kinetics between free doxorubicin and its nanoformulations were also observed in a real-time manner.

Micelle-like luminescent nanoparticles as a visible gene delivery system with reduced toxicity

Luminescent nanoparticles (TPEI) were synthesized to tackle the undesired cytotoxicity of cationic polymers and were also used for visible gene transfection.

A smart pH-switchable luminescent hydrogel

Here we report a novel example of a luminescent hydrogel, which is formed from silent individual molecules simply by altering the pH of the system.

Aggregation-induced emission: the whole is more brilliant than the parts

"United we stand, divided we fall."--Aesop. Aggregation-induced emission (AIE) refers to a photophysical phenomenon shown by a group of luminogenic materials that are non-emissive when they are dissolved in good solvents as molecules but become highly luminescent when they are clustered in poor solvents or solid state as aggregates. In this Review we summarize the recent progresses made in the area of AIE research. We conduct mechanistic analyses of the AIE processes, unify the restriction of intramolecular motions (RIM) as the main cause for the AIE effects, and derive RIM-based molecular engineering strategies for the design of new AIE luminogens (AIEgens). Typical examples of the newly developed AIEgens and their high-tech applications as optoelectronic materials, chemical sensors and biomedical probes are presented and discussed.

Cell membrane tracker based on restriction of intramolecular rotation

The fluorescence of tetraphenylethylene (TPE), an archetypal luminogen, is induced by restriction of intramolecular rotation (RIR). TPE was grafted with palmitic acid (PA) onto a hydrophilic peptide to yield a cell membrane tracker named TR4. TR4 was incorporated into liposomes, where it showed significant RIR characteristics. When cells were incubated with TR4, cytoplasmic membranes were specifically labeled. TR4 shows excellent photostability and low cytotoxicity.