Thermoresponsive magnetic hydrogels as theranostic nanoconstructs

Ultrasound and x-ray imageable poloxamer-based hydrogel for loco-regional therapy delivery in the liver

Intratumoral injections have the potential for enhanced cancer treatment efficacy while reducing costs and systemic exposure. However, intratumoral drug injections can result in substantial off-target leakage and are invisible under standard imaging modalities like ultrasound (US) and x-ray. A thermosensitive poloxamer-based gel for drug delivery was developed that is visible using x-ray imaging (computed tomography (CT), cone beam CT, fluoroscopy), as well as using US by means of integrating perfluorobutane-filled microbubbles (MBs). MBs content was optimized using tissue mimicking phantoms and ex vivo bovine livers. Gel formulations less than 1% MBs provided gel depositions that were clearly identifiable on US and distinguishable from tissue background and with minimal acoustic artifacts. The cross-sectional areas of gel depositions obtained with US and CT imaging were similar in studies using ex vivo bovine liver and postmortem in situ swine liver. The gel formulation enhanced multimodal image-guided navigation, enabling fusion of ultrasound and x-ray/CT imaging, which may enhance targeting, definition of spatial delivery, and overlap of tumor and gel. Although speculative, such a paradigm for intratumoral drug delivery might streamline clinical workflows, reduce radiation exposure by reliance on US, and boost the precision and accuracy of drug delivery targeting during procedures. Imageable gels may also provide enhanced temporal and spatial control of intratumoral conformal drug delivery.

Theranostic nanogels: multifunctional agents for simultaneous therapeutic delivery and diagnostic imaging

In recent years, there has been a growing interest in multifunctional theranostic agents capable of delivering therapeutic payloads while facilitating simultaneous diagnostic imaging of diseased sites. This approach offers a comprehensive strategy particularly valuable in dynamically evolving diseases like cancer, where combining therapy and diagnostics provides crucial insights for treatment planning. Nanoscale platforms, specifically nanogels, have emerged as promising candidates due to their stability, tunability, and multifunctionality as carriers. As a well-studied subgroup of soft polymeric nanoparticles, nanogels exhibit inherent advantages due to their size and chemical compositions, allowing for passive and active targeting of diseased tissues. Moreover, nanogels loaded with therapeutic and diagnostic agents can be designed to respond to specific stimuli at the disease site, enhancing their efficacy and specificity. This capability enables fine-tuning of theranostic platforms, garnering significant clinical interest as they can be tailored for personalized treatments. The ability to monitor tumor progression in response to treatment facilitates the adaptation of therapies according to individual patient responses, highlighting the importance of designing theranostic platforms to guide clinicians in making informed treatment decisions. Consequently, the integration of therapy and diagnostics using theranostic platforms continues to advance, offering intelligent solutions to address the challenges of complex diseases such as cancer. In this context, nanogels capable of delivering therapeutic payloads and simultaneously armed with diagnostic modalities have emerged as an attractive theranostic platform. This review focuses on advances made toward the fabrication and utilization of theranostic nanogels by highlighting examples from recent literature where their performances through a combination of therapeutic agents and imaging methods have been evaluated.

Research progress of advanced microneedle drug delivery system and its application in biomedicine

Transdermal drug delivery is an effective way of drug delivery in addition to oral and intravenous administration. Among them, microneedle administration is a new type of subcutaneous drug delivery, which forms micron-level pores on the surface of the skin, making the drug enter the dermis through the cuticular layer of the skin in the least invasive way. This mode of drug delivery not only increases the permeation efficiency of transdermal drug delivery but also improves the bioavailability of drug delivery. At present, there are many kinds of research on microneedles, such as solid microneedles, hollow microneedles, soluble polymer microneedles, etc. However, some new microneedle drug delivery systems have been gradually developed and applied with the development of microneedle drug delivery technology, for meeting the more complex pathological environment. In this review, we focus on the principle, structure, and function of some new types of microneedles, such as stimulus-response microneedles, iontophoresis microneedles, and bionic microneedles. We summarize the effects of materials, geometry, and size on the properties of microneedles as well as their applications and potential developments in the field of biomedicine. We hope that this review can provide new ideas and help with the development of new microneedle drug delivery systems.

Rheology Applied to Microgels: Brief (Revision of the) State of the Art

The ability of polymer microgels to rapidly respond to external stimuli is of great interest in sensors, lubricants, and biomedical applications, among others. In most of their uses, microgels are subjected to shear, deformation, and compression forces or a combination of them, leading to variations in their rheological properties. This review article mainly refers to the rheology of microgels, from the hard sphere versus soft particles' model. It clearly describes the scaling theories and fractal structure formation, in particular, the Shih et al. and Wu and Morbidelli models as a tool to determine the interactions among microgel particles and, thus, the viscoelastic properties. Additionally, the most recent advances on the characterization of microgels' single-particle interactions are also described. The review starts with the definition of microgels, and a brief introduction addresses the preparation and applications of microgels and hybrid microgels.

Graphene oxide modulates inter-particle interactions in 3D printable soft nanocomposite hydrogels restoring magnetic hyperthermia responses

Hydrogels loaded with magnetic iron oxide nanoparticles that can be patterned and which controllably induce hyperthermic responses on AC-field stimulation are of interest as functional components of next-generation biomaterials. Formation of nanocomposite hydrogels is known to eliminate any Brownian contribution to hyperthermic response (reducing stimulated heating) while the Néel contribution can also be suppressed by inter-particle dipolar interactions arising from aggregation induced before or during gelation. We describe the ability of graphene oxide (GO) flakes to restore the hyperthermic efficiency of soft printable hydrogels formed using Pluronics F127 and PEGylated magnetic nanoflowers. Here, by varying the amount of GO in mixed nanocomposite suspensions and gels, we demonstrate GO-content dependent recovery of hyperthemic response in gels. This is due to progressively reduced inter-nanoflower interactions mediated by GO, which largely restore the dispersed-state Néel contribution to heating. We suggest that preferential association of GO with the hydrophobic F127 blocks increases the preponderance of cohesive interactions between the hydrophilic blocks and the PEGylated nanoflowers, promoting dispersion of the latter. Finally we demonstrate extrusion-based 3D printing with excellent print fidelity of the magnetically-responsive nanocomposites, for which the inclusion of GO provides significant improvement in the spatially-localized open-coil heating response, rendering the prints viable components for future cell stimulation and delivery applications.

Nanoparticles for Magnetic Heating: When Two (or More) Is Better Than One

The increasing use of magnetic nanoparticles as heating agents in biomedicine is driven by their proven utility in hyperthermia therapeutic treatments and heat-triggered drug delivery methods. The growing demand of efficient and versatile nanoheaters has prompted the creation of novel types of magnetic nanoparticle systems exploiting the magnetic interaction (exchange or dipolar in nature) between two or more constituent magnetic elements (magnetic phases, primary nanoparticles) to enhance and tune the heating power. This process occurred in parallel with the progress in the methods for the chemical synthesis of nanostructures and in the comprehension of magnetic phenomena at the nanoscale. Therefore, complex magnetic architectures have been realized that we classify as: (a) core/shell nanoparticles; (b) multicore nanoparticles; (c) linear aggregates; (d) hybrid systems; (e) mixed nanoparticle systems. After a general introduction to the magnetic heating phenomenology, we illustrate the different classes of nanoparticle systems and the strategic novelty they represent. We review some of the research works that have significantly contributed to clarify the relationship between the compositional and structural properties, as determined by the synthetic process, the magnetic properties and the heating mechanism.

Bioresponsive nanomedicines based on dynamic covalent bonds

Trends in the development of modern medicine necessitate the efficient delivery of therapeutics to achieve the desired treatment outcomes through precise spatiotemporal accumulation of therapeutics at the disease site. Bioresponsive nanomedicine is a promising platform for this purpose. Dynamic covalent bonds (DCBs) have attracted much attention in studies of the fabrication of bioresponsive nanomedicines with an abundance of combinations of therapeutic modules and carrier function units. DCB-based nanomedicines could be designed to maintain biological friendly synthesis and site-specific release for optimal therapeutic effects, allowing the complex to retain an integrated structure before accumulating at the disease site, but disassembling into individual active components without compromising function in the targeted organs or tissues. In this review, we focus on responsive nanomedicines containing dynamic chemical bonds that can be cleaved by various specific stimuli, enabling achievement of targeted drug release for optimal therapy in various diseases.

Magnetic-responsive hydrogels: From strategic design to biomedical applications

Smart hydrogels which can respond to external stimuli have been widely focused with increasing interest. Thereinto, magnetic-responsive hydrogels that are prepared by embedding magnetic nanomaterials into hydrogel networks are more advantageous in biomedical applications due to their rapid magnetic response, precisely temporal and spatial control and non-invasively remote actuation. Upon the application of an external magnetic field, magnetic hydrogels can be actuated to perform multiple response modes such as locomotion, deformation and thermogenesis for therapeutic purposes without the limit of tissue penetration depth. This review summarizes the latest advances of magnetic-responsive hydrogels with focus on biomedical applications. The synthetic methods of magnetic hydrogels are firstly introduced. Then, the roles of different response modes of magnetic hydrogels played in different biomedical applications are emphatically discussed in detail. In the end, the current limitations and future perspectives for magnetic hydrogels are given.

Light-Triggered In Situ Gelation of Hydrogels using 2D Molybdenum Disulfide (MoS2 ) Nanoassemblies as Crosslink Epicenter

Light-responsive biomaterials are an emerging class of materials used for developing noninvasive, noncontact, precise, and controllable biomedical devices. Long-wavelength near-infrared (NIR) radiation is an attractive light source for in situ gelation due to its higher penetration depth and minimum side effects. The conventional approach to obtain crosslinked biomaterials relies heavily on the use of a photoinitiator by generating reactive species when exposed to short-wavelength radiation, which is detrimental to surrounding cells and tissue. Here, a new class of NIR-triggered in situ gelation system based on defect-rich 2D molybdenum disulfide (MoS2 ) nanoassemblies and thiol-functionalized thermoresponsive polymer in the absence of a photoinitiator is introduced. Exposure to NIR radiation activates the dynamic polymer-nanomaterials interactions by leveraging the photothermal characteristics of MoS2 and intrinsic phase transition ability of the thermoresponsive polymer. Specifically, upon NIR exposure, MoS2 acts as a crosslink epicenter by connecting with multiple polymeric chains via defect-driven click chemistry. As a proof-of-concept, the utility of NIR-triggered in situ gelation is demonstrated in vitro and in vivo. Additionally, the crosslinked gel exhibits the potential for NIR light-responsive release of encapsulated therapeutics. These light-responsive biomaterials have strong potential for a range of biomedical applications, including artificial muscle, smart actuators, 3D/4D printing, regenerative medicine, and therapeutic delivery.

Spatiotemporally Resolved Heat Dissipation in 3D Patterned Magnetically Responsive Hydrogels

Multifunctional nanocomposites that exhibit well-defined physical properties and encode spatiotemporally controlled responses are emerging as components for advanced responsive systems, for example, in soft robotics or drug delivery. Here an example of such a system, based on simple magnetic hydrogels composed of iron oxide magnetic nanoflowers and Pluronic F127 that generates heat upon alternating magnetic field irradiation is described. Rules for heat-induction in bulk hydrogels and the heat-dependence on particle concentration, gel volume, and gel exposed surface area are established, and the dependence on external environmental conditions in "closed" as compared to "open" (cell culture) system, with controllable heat jumps, of ∆T 0-12°C, achieved within ≤10 min and maintained described. Furthermore the use of extrusion-based 3D printing for manipulating the spatial distribution of heat in well-defined printed features with spatial resolution <150 µm, sufficiently fine to be of relevance to tissue engineering, is presented. Finally, localized heat induction in printed magnetic hydrogels is demonstrated through spatiotemporally-controlled release of molecules (in this case the dye methylene blue). The study establishes hitherto unobserved control over combined spatial and temporal induction of heat, the applications of which in developing responsive scaffold remodeling and cargo release for applications in regenerative medicine are discussed.

Superparamagnetic Iron Oxide Nanoparticles and Essential Oils: A New Tool for Biological Applications

Essential oils are complex mixtures of volatile compounds with diverse biological properties. Antimicrobial activity has been attributed to the essential oils as well as their capacity to prevent pathogenic microorganisms from forming biofilms. The search of compounds or methodologies with this capacity is of great importance due to the fact that the adherence of these pathogenic microorganisms to surfaces largely contributes to antibiotic resistance. Superparamagnetic iron oxide nanoparticles have been assayed for diverse biomedical applications due to their biocompatibility and low toxicity. Several methods have been developed in order to obtain functionalized magnetite nanoparticles with adequate size, shape, size distribution, surface, and magnetic properties for medical applications. Essential oils have been evaluated as modifiers of the surface magnetite nanoparticles for improving their stabilization but particularly to prevent the growth of microorganisms. This review aims to provide an overview on the current knowledge about the use of superparamagnetic iron oxide nanoparticles and essential oils on the prevention of microbial adherence and consequent biofilm formation with the goal of being applied on the surface of medical devices. Some limitations found in the studies are discussed.

Polymers, responsiveness and cancer therapy

A single outcome in a biological procedure at the time of cancer therapy is due to multiple changes happening simultaneously. Hence to mimic such complex biological processes, an understanding of stimuli responsiveness is needed to sense specific changes and respond in a predictable manner. Such responses due to polymers may take place either simultaneously at the site or in a sequential manner from preparation to transporting pathways to cellular compartments. The present review comprehends the stimuli-responsive polymers and multi-responsiveness with respect to cancer therapy. It focuses on the exploitation of different stimuli like temperature, pH and enzymes responsiveness in a multi-stimuli setting. Nanogels and micelles being two of the most commonly used responsive polymeric carriers have also been discussed. The role of multiple stimuli delivery system is significant due to multiple changes happening in the near surroundings of cancer cells. These responsive materials are able to mimic some biological processes and recognize at the molecular level itself to manipulate development of custom-designed molecules for targeting cancer cells.

Hierarchy of Hybrid Materials-The Place of Inorganics-in-Organics in it, Their Composition and Applications

Hybrid materials, or hybrids incorporating both organic and inorganic constituents, are emerging as a very potent and promising class of materials due to the diverse, but complementary nature of the properties inherent of these different classes of materials. The complementarity leads to a perfect synergy of properties of desired material and eventually an end-product. The diversity of resultant properties and materials used in the construction of hybrids, leads to a very broad range of application areas generated by engaging very different research communities. We provide here a general classification of hybrid materials, wherein organics-in-inorganics (inorganic materials modified by organic moieties) are distinguished from inorganics-in-organics (organic materials or matrices modified by inorganic constituents). In the former area, the surface functionalization of colloids is distinguished as a stand-alone sub-area. The latter area-functionalization of organic materials by inorganic additives-is the focus of the current review. Inorganic constituents, often in the form of small particles or structures, are made of minerals, clays, semiconductors, metals, carbons, and ceramics. They are shown to be incorporated into organic matrices, which can be distinguished as two classes: chemical and biological. Chemical organic matrices include coatings, vehicles and capsules assembled into: hydrogels, layer-by-layer assembly, polymer brushes, block co-polymers and other assemblies. Biological organic matrices encompass bio-molecules (lipids, polysaccharides, proteins and enzymes, and nucleic acids) as well as higher level organisms: cells, bacteria, and microorganisms. In addition to providing details of the above classification and analysis of the composition of hybrids, we also highlight some antagonistic yin-&-yang properties of organic and inorganic materials, review applications and provide an outlook to emerging trends.

Magnetic Dehydrodipeptide-Based Self-Assembled Hydrogels for Theragnostic Applications

Self-assembled peptide hydrogels have emerged in recent years as the new paradigm in biomaterials research. We have contributed to this field the development of hydrogels based on dehydrodipeptides N-capped with naproxen. The dehydrodipeptide hydrogels can be loaded with drugs, thus being potential nanocarriers for drug delivery. In this work novel dehydrodipeptides containing tyrosine and aspartic acid amino acid residues N-capped with naproxen and C-terminal dehydrophenylalanine were prepared and characterized. Superparamagnetic iron oxide nanoparticles (SPIONs) were incorporated into the dehydrodipeptide-based hydrogels and their effect on the self-assembly, structure and rheological and magnetic properties of the hydrogels was studied. Magnetic hydrogels, with incorporated SPIONs, displayed concentration-dependent T₂-MRI contrast enhancement. Moreover, upon magnetic excitation (alternating magnetic field -AMF-) the SPIONs were able to generate a significant amount of heat. Hence, magnetic hyperthermia can be used as a remote trigger for release of drug cargos and SPIONs incorporated into the self-assembled dehydrodipeptide hydrogels.

Viewing the Emphasis on State-of-the-Art Magnetic Nanoparticles: Synthesis, Physical Properties, and Applications in Cancer Theranostics

Cancer-related mortality is a leading cause of death among both men and women around the world. Target-specific therapeutic drugs, early diagnosis, and treatment are crucial to reducing the mortality rate. One of the recent trends in modern medicine is "Theranostics," a combination of therapeutics and diagnosis. Extensive interest in magnetic nanoparticles (MNPs) and ultrasmall superparamagnetic iron oxide nanoparticles (NPs) has been increasing due to their biocompatibility, superparamagnetism, less-toxicity, enhanced programmed cell death, and auto-phagocytosis on cancer cells. MNPs act as a multifunctional, noninvasive, ligand conjugated nano-imaging vehicle in targeted drug delivery and diagnosis. In this review, we primarily discuss the significance of the crystal structure, magnetic properties, and the most common method for synthesis of the smaller sized MNPs and their limitations. Next, the recent applications of MNPs in cancer therapy and theranostics are discussed, with certain preclinical and clinical experiments. The focus is on implementation and understanding of the mechanism of action of MNPs in cancer therapy through passive and active targeting drug delivery (magnetic drug targeting and targeting ligand conjugated MNPs). In addition, the theranostic application of MNPs with a dual and multimodal imaging system for early diagnosis and treatment of various cancer types including breast, cervical, glioblastoma, and lung cancer is reviewed. In the near future, the theranostic potential of MNPs with multimodality imaging techniques may enhance the acuity of personalized medicine in the diagnosis and treatment of individual patients.

Recent insights in magnetic hyperthermia: From the "hot-spot" effect for local delivery to combined magneto-photo-thermia using magneto-plasmonic hybrids

Magnetic hyperthermia which exploits the heat generated by magnetic nanoparticles (MNPs) when exposed to an alternative magnetic field (AMF) is now in clinical trials for the treatment of cancers. However, this thermal therapy requires a high amount of MNPs in the tumor to be efficient. On the contrary the hot spot local effect refers to the use of specific temperature profile at the vicinity of nanoparticles for heating with minor to no long-range effect. This magneto-thermal effect can be exploited as a relevant external stimulus to temporally and spatially trigger drug release. In this review, we focus on recent advances in magnetic hyperthermia. Indirect experimental proofs of the local temperature increase are first discussed leading to a good estimation of the temperature at the surface (from 0.5 to 6 nm) of superparamagnetic NPs. Then we highlight recent studies illustrating the hot-spot effect for drug-release. Finally, we present another recent strategy to enhance the efficacity of thermal treatment by combining photothermal therapy with magnetic hyperthermia mediated by magneto-plasmonic nanoplatforms.

Biocompatibility and therapeutic evaluation of magnetic liposomes designed for self-controlled cancer hyperthermia and chemotherapy

Magnetic liposome-mediated combined chemotherapy and hyperthermia is gaining importance as an effective therapeutic modality for cancer. However, control and maintenance of optimum hyperthermia are major challenges in clinical settings due to the overheating of tissues. To overcome this problem, we developed a novel magnetic liposomes formulation co-entrapping a dextran coated biphasic suspension of La_0.75Sr_0.25MnO₃ (LSMO) and iron oxide (Fe₃O₄) nanoparticles for self-controlled hyperthermia and chemotherapy. However, the general apprehension about biocompatibility and safety of the newly developed formulation needs to be addressed. In this work, in vitro and in vivo biocompatibility and therapeutic evaluation studies of the novel magnetic liposomes are reported. Biocompatibility study of the magnetic liposomes formulation was carried out to evaluate the signs of preliminary systemic toxicity, if any, following intravenous administration of the magnetic liposomes in Swiss mice. Therapeutic efficacy of the magnetic liposomes formulation was evaluated in the fibrosarcoma tumour bearing mouse model. Fibrosarcoma tumour-bearing mice were subjected to hyperthermia following intratumoral injection of single or double doses of the magnetic liposomes with or without chemotherapeutic drug paclitaxel. Hyperthermia (three spurts, each at 3 days interval) with drug loaded magnetic liposomes following single dose administration reduced the growth of tumours by 2.5 fold (mean tumour volume 2356 ± 550 mm³) whereas the double dose treatment reduced the tumour growth by 3.6 fold (mean tumour volume 1045 ± 440 mm³) compared to their corresponding control (mean tumour volume 3782 ± 515 mm³). At the end of the tumour efficacy studies, the presence of MNPs was studied in the remnant tumour tissues and vital organs of the mice. No significant leaching or drainage of the magnetic liposomes during the study was observed from the tumour site to the other vital organs of the body, suggesting again the potential of the novel magnetic liposomes formulation for possibility of developing as an effective modality for treatment of drug resistant or physiologically vulnerable cancer.

Intelligent anticancer drug delivery performances of two poly(N-isopropylacrylamide)-based magnetite nanohydrogels

This article evaluates the anticancer drug delivery performances of two nanohydrogels composed of poly(N-isopropylacrylamide-co-itaconic anhydride) [P(NIPAAm-co-IA)], poly(ethylene glycol) (PEG), and Fe₃O₄ nanoparticles. For this purpose, the magnetite nanohydrogels (MNHGs) were loaded with doxorubicin hydrochloride (DOX) as a universal anticancer drug. The morphologies and magnetic properties of the DOX-loaded MNHGs were investigated using transmission electron microscopy (TEM) and vibrating-sample magnetometer (VSM), respectively. The sizes and zeta potentials (ξ) of the MNHGs and their corresponding DOX-loaded nanosystems were also investigated. The DOX-loaded MNHGs showed the highest drug release values at condition of 41 °C and pH 5.3. The drug-loaded MNHGs at physiological condition (pH 7.4 and 37 °C) exhibited negligible drug release values. In vitro cytotoxic effects of the DOX-loaded MNHGs were extensively evaluated through the assessing survival rate of HeLa cells using the MTT assay, and there in vitro cellular uptake into the mentioned cell line were examined using fluorescent microscopy and fluorescence-activated cell sorting (FACS) flow cytometry analyses. As the results, the DOX-loaded MNHG1 exhibited higher anticancer drug delivery performance in the terms of cytotoxic effect and in vitro cellular uptake. Thus, the developed MNHG1 can be considered as a promising de novo drug delivery system, in part due to its pH and thermal responsive drug release behavior as well as proper magnetite character toward targeted drug delivery.

Thermo-responsive gels based on supramolecular assembly of an amidoamine and citric acid

In this work, we report the formation of a novel, aqueous-based thermo-responsive, supramolecular gelling system prepared by a convenient and efficient self-assembly of a long-chain amino-amide and citric acid. To determine the viscosity behavior and to gain insights into the gelation mechanism, a complementary combination of techniques, including Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), dynamic light scattering (DLS), and sinusoidal oscillatory tests, were used. The supramolecular gelator exhibited remarkably reversible sol-gel transitions induced by temperature at 76 °C. At a concentration of 5 wt%, the zero-frequency viscosity of the supramolecular system increased by about four orders of magnitude (from 4.2 to 12 563 Pa s) by changing the temperature from 23 °C to 76 °C. The viscous nature of the supramolecular gel could be preserved up to 90 °C. The synergistic combination of the hydrogen bonding between amino and carboxylic acid groups and the electrostatic interactions arising from the protonation of the amino-group and the deprotonation of carboxylic acid groups enhanced at higher temperatures is presumably responsible for the thermo-responsive behavior. We anticipate that these supramolecular gelators can be beneficial in various applications such as hydrogel scaffolds for regenerative medicine, personal care products and cosmetics, and enhanced oil recovery as viscosity modifiers.

Magnetic lipid nanocapsules (MLNCs): self-assembled lipid-based nanoconstruct for non-invasive theranostic applications

A novel magnetic nanostructures (MNS) stabilized lipid nanoconstruct is reported that shows superior structural stability and theranostic functionality than conventional lipid based nanocarriers.

Influence of Grafted Block Copolymer Structure on Thermoresponsiveness of Superparamagnetic Core-Shell Nanoparticles

The morphology and topology of thermoresponsive polymers have a strong impact on their responsive properties. Grafting onto spherical particles has been shown to reduce responsiveness and transition temperatures; grafting of block copolymers has shown that switchable or retained wettability of a surface or particle during desolvation of one block can take place. Here, doubly thermoresponsive block copolymers were grafted onto spherical, monodisperse, and superparamagnetic iron oxide nanoparticles to investigate the effect of thermal desolvation on spherical brushes of block copolymers. By inverting the block order, the influence of core proximity on the responsive properties of the individual blocks could be studied as well as their relative influence on the nanoparticle colloidal stability. The inner block was shown to experience a stronger reduction in transition temperature and transition enthalpy compared to the outer block. Still, the outer block also experiences a significant reduction in responsiveness due to the restricted environment in the nanoparticle shell compared to that of the free polymer state. The demonstrated pronounced distance dependence importantly implies the possibility, but also the necessity, to radially tailor polymer hydration transitions for applications such as drug delivery, hyperthermia, and biotechnological separation for which thermally responsive nanoparticles are being developed.

Injectable nanoengineered stimuli-responsive hydrogels for on-demand and localized therapeutic delivery

"Smart" hydrogels are an emerging class of biomaterials that respond to external stimuli and have been investigated for a range of biomedical applications, including therapeutic delivery and regenerative engineering. Stimuli-responsive nanogels constructed of thermoresponsive polymers such as poly(N-isopropylacrylamide-co-acrylamide) (poly(NIPAM-co-AM)) and magnetic nanoparticles (MNPs) have been developed as "smart carriers" for on-demand delivery of therapeutic biomolecules via magneto-thermal activation. However, due to their small size and systemic introduction, these poly(NIPAM-co-AM)/MNP nanogels result in limited control over long-term, localized therapeutic delivery. Here, we developed an injectable nanoengineered hydrogel loaded with poly(NIPAM-co-AM)/MNPs for localized, on-demand delivery of therapeutics (doxorubicin (DOX)). We have engineered shear-thinning and self-recoverable hydrogels by modulating the crosslinking density of a gelatin methacrylate (GelMA) network. Poly(NIPAM-co-AM)/MNP nanogels loaded with DOX were entrapped within a GelMA pre-polymer solution prior to crosslinking. The temperature and magnetic field dependent release of loaded DOX was observed from the nanoengineered hydrogels (GelMA/(poly(NIPAM-co-AM)/MNPs)). Finally, the in vitro efficacy of DOX released from injectable nanoengineered hydrogels was investigated using preosteoblast and osteosarcoma cells. Overall, these results demonstrated that the injectable nanoengineered hydrogels could be used for on-demand and localized therapeutic delivery for biomedical applications.

Magnetic Poly(N-isopropylacrylamide) Nanocomposites: Effect of Preparation Method on Antibacterial Properties

The most challenging task in the preparation of magnetic poly(N-isopropylacrylamide) (Fe₃O₄-PNIPAAm) nanocomposites for bio-applications is to maximise their reactivity and stability. Emulsion polymerisation, in situ precipitation and physical addition were used to produce Fe₃O₄-PNIPAAm-1, Fe₃O₄-PNIPAAm-2 and Fe₃O₄-PNIPAAm-3, respectively. Their properties were characterised using scanning electron microscopy (morphology), zeta-potential (surface charge), thermogravimetric analysis (stability), vibrating sample magnetometry (magnetisation) and dynamic light scattering. Moreover, we investigated the antibacterial effect of each nanocomposite against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. Both Fe₃O₄-PNIPAAm-1 and Fe₃O₄-PNIPAAm-2 nanocomposites displayed high thermal stability, zeta potential and magnetisation values, suggesting stable colloidal systems. Overall, the presence of Fe₃O₄-PNIPAAm nanocomposites, even at lower concentrations, caused significant damage to both E. coli and S. aureus DNA and led to a decrease in cell viability. Fe₃O₄-PNIPAAm-1 displayed a stronger antimicrobial effect against both bacterial strains than Fe₃O₄-PNIPAAm-2 and Fe₃O₄-PNIPAAm-3. Staphylococcus aureus was more sensitive than E. coli to all three magnetic PNIPAAm nanocomposites.

Doxorubicin Intracellular Remote Release from Biocompatible Oligo(ethylene glycol) Methyl Ether Methacrylate-Based Magnetic Nanogels Triggered by Magnetic Hyperthermia

Hybrid nanogels, composed of thermoresponsive polymers and superparamagnetic nanoparticles, are attractive nanocarriers for biomedical applications, being able-as a polymer matrix-to uptake and release high quantities of chemotherapeutic agents and-as magnetic nanoparticles-to be heated when exposed to an alternative magnetic field (AMF), better known as magnetic hyperthermia. Herein, biocompatible, pH-responsive, magnetoresponsive, and thermoresponsive nanogels, based on oligo(ethylene glycol) methyl ether methacrylate monomers and a methacrylic acid comonomer were prepared by conventional precipitation radical copolymerization in water, post-assembled by complexation with iron oxide magnetic nanoparticles (MNPs) of maghemite (γ-Fe₂O₃), and loaded with an anticancer drug (doxorubicin, DOX), for remotely controlled drug release by a "hot spot", as an athermal magnetic hyperthermia strategy against cancer. These nanogels, denoted MagNanoGels, with a hydrodynamic diameter from 328 to 460 nm, as a function of the MNP content, have a swelling-deswelling behavior at their volume phase temperature transition around 47 °C in a physiological medium (pH 7.5), which is above the human body temperature (37 °C). Applying an alternative magnetic field increases the release of DOX by 2-fold, while no macroscopic heating was recorded. This enhanced drug release is due to a shrinking of the polymer network by local heating, as illustrated by the MagNanoGel size decrease under an AMF. In cancer cells, not only do the DOX-MagNanoGels internalize DOX more efficiently than free DOX, but also DOX intracellular release can be remotely triggered under an AMF, in athermal conditions, thus enhancing DOX cytotoxicity.

Photothermal-modulated drug delivery and magnetic relaxation based on collagen/poly(γ-glutamic acid) hydrogel

Injectable and stimuli-responsive hydrogels have attracted attention in molecular imaging and drug delivery because encapsulated diagnostic or therapeutic components in the hydrogel can be used to image or change the microenvironment of the injection site by controlling various stimuli such as enzymes, temperature, pH, and photonic energy. In this study, we developed a novel injectable and photoresponsive composite hydrogel composed of anticancer drugs, imaging contrast agents, bio-derived collagen, and multifaceted anionic polypeptide, poly (γ-glutamic acid) (γ-PGA). By the introduction of γ-PGA, the intrinsic temperature-dependent phase transition behavior of collagen was modified to a low viscous sol state at room temperature and nonflowing gel state around body temperature. The modified temperature-dependent phase transition behavior of collagen/γ-PGA hydrogels was also evaluated after loading of near-infrared (NIR) fluorophore, indocyanine green (ICG), which could transform absorbed NIR photonic energy into thermal energy. By taking advantage of the abundant carboxylate groups in γ-PGA, cationic-charged doxorubicin (Dox) and hydrophobic MnFe₂O₄ magnetic nanoparticles were also incorporated successfully into the collagen/γ-PGA hydrogels. By illumination of NIR light on the collagen/γ-PGA/Dox/ICG/MnFe₂O₄ hydrogels, the release kinetics of Dox and magnetic relaxation of MnFe₂O₄ nanoparticles could be modulated. The experimental results suggest that the novel injectable and NIR-responsive collagen/γ-PGA hydrogels developed in this study can be used as a theranostic platform after loading of various molecular imaging probes and therapeutic components.

Thermosensitive hydrogel loaded with chitosan-carbon nanotubes for near infrared light triggered drug delivery

Controlled drug release with on demand is an important challenge for drug delivery. Near-infrared (NIR) light triggered drug delivery reflected the development of a significant strategy to control drug release based on photothermal effects. Herein, a sustained and controlled drug delivery system was developed based on a PCL-PEG-PCL thermosensitive hydrogel combined with chitosan-multiwalled carbon nanotubes for a near infrared light triggered drug delivery. Carbon nanotubes that incorporate hydrogel can enhance the sustained effect of drug delivery by a dual-stage release and allow drug delivery by controlling light irradiation. This in situ photothermal process was monitored by thermal imaging and the controlled drug delivery of doxorubicin was tracked in real-time by fluorescence imaging in vivo based on the fluorescence ability of the drug using nude mice as models. The results suggest that the photothermal effect of the carbon nanotubes can disrupt the structure of the hydrogel with a gel-sol transition, triggering the release of the drug from the sustained drug delivery system by NIR irradiation while responding on demand. The sustained and controlled drug delivery has the potential to implement the accurate administration of hydrogel-based drug delivery systems.

Synergistically enhanced selective intracellular uptake of anticancer drug carrier comprising folic acid-conjugated hydrogels containing magnetite nanoparticles

Targeted drug delivery has long been extensively researched since drug delivery and release at the diseased site with minimum dosage realizes the effective therapy without adverse side effects. In this work, to achieve enhanced intracellular uptake of anticancer drug carriers for efficient chemo-therapy, we have designed targeted multifunctional anticancer drug carrier hydrogels. Temperature-responsive poly(N-isopropylacrylamide) (PNIPAm) hydrogel core containing superparamagnetic magnetite nanoparticles (MNP) were prepared using precipitation polymerization, and further polymerized with amine-functionalized copolymer shell to facilitate the conjugation of targeting ligand. Then, folic acid, specific targeting ligand for cervical cancer cell line (HeLa), was conjugated on the hydrogel surface, yielding the ligand conjugated hybrid hydrogels. We revealed that enhanced intracellular uptake by HeLa cells in vitro was enabled by both magnetic attraction and receptor-mediated endocytosis, which were contributed by MNP and folic acid, respectively. Furthermore, site-specific uptake of the developed carrier was confirmed by incubating with several other cell lines. Based on synergistically enhanced intracellular uptake, efficient cytotoxicity and apoptotic activity of HeLa cells incubated with anticancer drug loaded hybrid hydrogels were successfully achieved. The developed dual-targeted hybrid hydrogels are expected to provide a platform for the next generation intelligent drug delivery systems.

Energy-triggered drug release from polymer nanoparticles for orthopedic applications

Sequestra, present in many cancers and orthopedic infections, provide a safe harbor for the development of drug resistance. In the face of burgeoning drug resistance, the importance of nanoscale, microenvironment-triggered drug delivery cannot be overestimated. Such strategies may preserve pharmaceutical efficacy and significantly alter the etiology of many orthopedic diseases. Although temperature-, pH- and redox-responsive nanoparticle-based systems have been extensively studied, local drug delivery from polymeric nanoparticles can be triggered by a variety of energy forms. This review offers an overview of the state of the field as well as a perspective on the safety and efficacy of ultrasound, hyperthermia and radio frequency-triggered internal delivery systems in a variety of applications.

Nanoengineered thermoresponsive magnetic hydrogels for biomedical applications

“Smart” hydrogels are part of an emerging class of biomaterials that respond to multiple external stimuli. A range of thermoresponsive magnetic hydrogels is currently being developed for on‐demand delivery of biomolecules for a range of biomedical applications, including therapeutic drug delivery, bioimaging, and regenerative engineering. In this review article, we explore different types of magnetic nanoparticles and thermoresponsive polymers used to fabricate these smart nanoengineered hydrogels. We highlight some of the emerging applications of these stimuli‐responsive hydrogels for biomedical applications. Finally, we capture the growing trend of these smart nanoengineered hydrogels and will identify promising new research directions.

Sub-Micrometer Magnetic Nanocomposites: Insights into the Effect of Magnetic Nanoparticles Interactions on the Optimization of SAR and MRI Performance

There is increasing interest in the development of new magnetic polymeric carriers for biomedical applications such as trigger-controlled drug release, magnetic hyperthermia (MH) for the treatment of cancer, and as contrast agents in magnetic resonance imaging (MRI). This work describes the synthesis of sub-micrometer and magnetic polymer nanocomposite capsules (MPNCs) by combining in one single platform the biodegradable polymer poly-ε-caprolactone (PCL) and different concentrations of ∼8 nm oleic acid (OA)-functionalized magnetite nanoparticles (Fe₃O₄@OA), employing the oil-in-water emulsion/solvent evaporation method. The MPNCs showed a significant increase in particle size from ∼400 to ∼800 nm as the magnetic loading in the organic-inorganic hybrids increases from 1.0% to 10%. The MPNCs presented high incorporation efficiency of Fe₃O₄@OA nanoparticles, good colloidal stability, and super-paramagnetic properties. Interestingly, electron microscopy results showed that the Fe₃O₄@OA nanoparticles were preferentially located at the surface of the capsules. Evaluation of the magnetic properties showed that the saturation magnetization and the blocking temperature of the MPNCs samples increased as a function of the Fe₃O₄@OA loading. All the MPNCs exhibited heating when subjected to MH, and showed good specific absorption rates. Use of the formulations decreased the longitudinal (T₁) and transverse (T₂) relaxation times of water protons' nuclei, with excellent transverse relaxivity (r₂) values, especially in the case of the formulation with lowest Fe₃O₄@OA loading. Furthermore, the MPNCs-cell interaction was studied, and MPNCs showed lower cellular toxicity to normal cells compared to cancer cells. These findings help in understanding the relationships between magnetic nanoparticles and polymeric capsules, opening perspectives for their potential clinical uses as simultaneous heating sources and imaging probes in MH and MRI, respectively.

Synthesis and characterization of smart N-isopropylacrylamide-based magnetic nanocomposites containing doxorubicin anti-cancer drug

In the present study, magnetic and thermo/pH-sensitive (multiresponsive) nanocomposites based on N-isopropylacrylamide (NIPAAM) were synthesized and characterized. Nanocomposites were synthesized by free radical emulsion polymerization of NIPAAM as thermosensitive monomer and N,N-dimethyl-aminoethyl methacrylate (DMAEMA) as pH-sensitive monomer in the presence of methylene-bis-acrylamide as cross-linking agent. Doxorubicin, an anti-cancer drug, was loaded into these nanocomposites via equilibrium swelling method. Thermo/pH-sensitive cross-linked poly (NIPAAM-DMAEMA)-Fe₃O₄ nanocomposites were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and vibrating sample magnetometer (VSM). The volume of the loaded drug and drug release amount was determined by UV measurements. The results showed that this thermo/pH-sensitive magnetic nanocomposite has a high drug-loading efficiency. Doxorubicin was released at 40 °C and pH 5.8 more than the 37 °C and pH 7.4.

Mechanically Stiff Nanocomposite Hydrogels at Ultralow Nanoparticle Content

Although hydrogels are able to mimic native tissue microenvironments, their utility for biomedical applications is severely hampered due to limited mechanical stiffness and low toughness. Despite recent progress in designing stiff and tough hydrogels, it is still challenging to achieve a cell-friendly, high modulus construct. Here, we report a highly efficient method to reinforce collagen-based hydrogels using extremely low concentrations of a nanoparticulate-reinforcing agent that acts as a cross-link epicenter. Extraordinarily, the addition of these nanoparticles at a 10 000-fold lower concentration relative to polymer resulted in a more than 10-fold increase in mechanical stiffness and a 20-fold increase in toughness. We attribute the high stiffness of the nanocomposite network to the chemical functionality of the nanoparticles, which enabled the cross-linking of multiple polymeric chains to the nanoparticle surface. The mechanical stiffness of the nanoengineered hydrogel can be tailored between 0.2 and 200 kPa simply by manipulating the size of the nanoparticles (4, 8, and 12 nm), as well as the concentrations of the nanoparticles and polymer. Moreover, cells can be easily encapsulated within the nanoparticulate-reinforced hydrogel network, showing high viability. In addition, encapsulated cells were able to sense and respond to matrix stiffness. Overall, these results demonstrate a facile approach to modulate the mechanical stiffness of collagen-based hydrogels and may have broad utility for various biomedical applications, including use as tissue-engineered scaffolds and cell/protein delivery vehicles.

Exfoliated sheets of MoS2 trigger formation of aqueous gels with acute NIR light responsiveness

We have developed a unique class of MoS₂ entrapped aqueous gels where the exfoliated sheets trigger physical cross-linking of nanofibers of peptide amphiphiles.

Magnetic nanoparticles and nanocomposites for remote controlled therapies

This review highlights the state-of-the-art in the application of magnetic nanoparticles (MNPs) and their composites for remote controlled therapies. Novel macro- to nano-scale systems that utilize remote controlled drug release due to actuation of MNPs by static or alternating magnetic fields and magnetic field guidance of MNPs for drug delivery applications are summarized. Recent advances in controlled energy release for thermal therapy and nanoscale energy therapy are addressed as well. Additionally, studies that utilize MNP-based thermal therapy in combination with other treatments such as chemotherapy or radiation to enhance the efficacy of the conventional treatment are discussed.

Enhanced cell apoptosis triggered by a multi modal mesoporous amphiphilic drug delivery system

Mesoporous magnetic nanoparticles (MMNPs) have been synthesized through a facile soft chemical route and are conjugated with multiple therapeutic agents. These MMNPs have the ability to contain and deliver both hydrophilic and hydrophobic drugs simultaneously with the mediation of an AC magnetic field (ACMF). Furthermore, the synthesis and characterization of doxorubicin hydrochloride:paclitaxel (DOX:TXL) and doxorubicin hydrochloride:cisplatin (DOX:Cis-Pt) conjugates are demonstrated. MMNPs show an excellent loading efficiency of ~96:83% (DOX:TXL) and ~93:83% (DOX:Cis-Pt) along with a loading capacity of ~0.002:0.002 mg mg(-1) (DOX:TXL) and ~0.002:0.002 mg mg(-1) (DOX:Cis-Pt), respectively. Over a period of 180 h, a sustained release of drugs is observed and shows a better efficiency at pH 4.3 (~85:63%-DOX:TXL and ~86:73%-DOX:Cis-Pt) compared to that under physiological pH conditions (~28:22%-DOX:TXL and ~26:22%-DOX:Cis-Pt). The MMNPs can release ~37:22% (DOX:TXL) and ~34:25% (DOX:Cis-Pt) within 30 min when triggered by an ACMF (at ~43 °C). The in vitro cytotoxic effect, the ROS generation level and cell cycle distribution analysis of DOX:TXL-MMNPs and DOX:Cis-Pt-MMNPs treated MDA-MB231, MCF-7 and PC3 cancer cells are demonstrated. Enhanced cell apoptosis is observed by thermo-chemotherapy which includes application of an ACMF for 15 min. Specifically, DOX:TXL-MMNPs are more effective than DOX:Cis-Pt-MMNPs towards the PC3 cell line. The internalization of multiple drug loaded MMNPs by cells and their morphological changes due to thermo-chemotherapy are confirmed through confocal microscopy. From the present results, it is observed that the DOX:TXL and DOX:Cis-Pt conjugated MMNPs, under an ACMF, can readily minimize drug resistance. This has significantly enhanced the cell apoptosis of target cancer cells.

Multifunctional hybrid nanogels for theranostic applications

This paper reviews a wide set of theranostic applications based on the special properties associated with composite nanogels. The nanogels presented here are mostly hybridized with quantum dots, magnetic nanoparticles, and plasmonic metal noble nanoparticles. These inorganic components confer nanogels multifunctional properties that extend their applications from drug delivery systems to diagnosis and therapy. Nanogels can also be surface functionalized with specific ligands to achieve targeted therapy and reduce toxicity. This versatility makes hybrid nanogels very promising agents for imaging, diagnosis and treatment of cancer and other diseases.

Magneto-thermally responsive hydrogels for bladder cancer treatment: Therapeutic efficacy and in vivo biodistribution

Bladder cancer is one of the deadliest forms of cancer in modern medicine which despite recent progress has remained incurable and challenging for researchers. There is unmet need to address this endemic as the number of patients are growing by about 10,000 every year world-wide. Here, we report a minimally invasive magnetic chemotherapy method to address this problem where polyethylene glycol (PEG) functionalized Fe3O4 magnetic nanostructures (MNS) are homogeneously embedded in thermally responsive poly(N-isopropylacrylamide, NIPAAm) hydrogels (HG). The system (HG-MNS) loaded with anti-cancer drug doxorubicin (DOX) incubated with cancer cell lines subjected to external radiofrequency (RF) field can remotely stimulate the release of drug smartly at the site. The in vitro efficacy investigated on bladder cancer (T-24) cell lines showed the potential of the system in dealing with the disease successfully. Further, the materials preferential accumulation via systemic delivery was studied using swiss mice model. Vital tissue organs like liver, lung and heart were analysed by magnetic resonance imaging (MRI). A detail accounts of the materials optimization, cytotoxicity and anti-proliferation activity tests with apoptosis analysis by flow cytometry after RF exposure (250 kHz) to the cells and in vivo biodistribution data are discussed in the paper.