Supersaturation-controlled shape evolution of α-Fe2O3 nanocrystals and their facet-dependent catalytic and sensing properties

Steering the Selective Production of Glycolic Acid by Electrocatalytic Oxidation of Ethylene Glycol with Nanoengineered PdBi-Based Heterodimers

Heterodimers of metal nanocrystals (NCs) with tailored elemental distribution have emerged as promising candidates in the field of electrocatalysis, owing to their unique structures featuring heterogeneous interfaces with distinct components. Despite this, the rational synthesis of heterodimer NCs with similar elemental composition remains a formidable challenge, and their impact on electrocatalysis has remained largely elusive. In this study, Pd@Bi-PdBi heterodimer NCs are synthesized through an underpotential deposition (UPD)-directed growth pathway. In this pathway, the UPD of Bi promotes a Volmer-Weber growth mode, allowing for judicious modulation of core-satellite to heterodimer structures through careful control of supersaturation and growth kinetics. Significantly, the heterodimer NCs are employed in the electrocatalytic process of ethylene glycol (EG) with high activity and selectivity. Compared with pristine Pd octahedra and common PdBi alloy NC, the unique heterodimer structure of the Pd@Bi-PdBi heterodimer NCs endows them with the highest electrocatalytic performance of EG and the best selectivity (≈93%) in oxidizing EG to glycolic acid (GA). Taken together, this work not only heralds a new strategy for UPD-directed synthesis of bimetallic NCs, but also provides a new design paradigm for steering the selectivity of electrocatalysts.

Microwave-Assisted Hydrothermal Synthesis of {100} and {111} Faceted LiFeO2 Truncated Octahedra: Investigations on Volatile Organic Compound Sensing Performance

Growth of exposed crystal facets has received considerable attention because of their coordinatively unsaturated surface atoms and defect-related surface reactivities. Herein, LiFeO2 truncated octahedra exposed with 6 {100} facets and 8 {111} facets were prepared through a simple microwave-assisted hydrothermal method without using any additives, surfactants, and calcination processes. The detailed growth process revealed that the formation of LiFeO2 truncated octahedra occurred only at the optimized reaction temperature (180 °C), time (30 min), and reactant concentrations. The prepared LiFeO2 truncated octahedra showed excellent sensing responses toward aliphatic organic compounds compared to that against aromatic organic compounds and poor response to inorganic compounds. The response percentages of 150 ppm concentrations of acetone, ethanol, formaldehyde, and isopropyl alcohol are 81.84, 62.91, 62.68, and 69.41%, respectively, at a low operating temperature (100 °C). The presence of exposed facets with their coordinatively unsaturated Li/Fe surface atoms such as 5-fold {100}, 3-fold {111}, 3-fold {100}-{111}, 2-fold {111}-{111}, and 2-fold coordination with the O atom in the vertices facilitated more oxygen vacancies and led to improved surface reactivities as well as sensitivity.

Construction of an OCP-ATR-FTIR Spectroscopy Device to In Situ Monitor the Interfacial Reaction of Contaminants: Competitive Adsorption of Cr(VI) and Oxalate on Hematite

The comprehensive understanding of contaminant interfacial behavior strongly depends on the in situ characterization technique, which is still a great challenge. In this study, we constructed a device integrated with open-circuit potentialand attenuated total reflectance Fourier transform infrared (OCP-ATR-FTIR) spectroscopy to simultaneously monitor the electrochemical and infrared spectral information on the interfacial reaction for the process analysis, taking the competitive adsorption of hexavalent chromium (Cr(VI)) and oxalate on hematite nanocubes (HNC) as an example. The synchronous OCP and infrared results revealed that Cr(VI) interacted with HNC via bidentate binuclear inner-sphere coordination, accompanied by electron transfer from HNC to Cr(VI), while oxalate was adsorbed on HNC through bidentate mononuclear side-on inner-sphere coordination with electron transfer from HNC to oxalate, and also outer-sphere coordination with negative charge accumulation. When oxalate was added to HNC with preadsorbed Cr(VI), oxalate would occupy the inner-sphere adsorption sites and thus cause the detaching of preadsorbed Cr(VI) from HNC. This study provides a promising in situ characterization technique for real-time interfacial reaction monitoring and also sheds light on the competitive adsorption mechanism of oxalate and Cr(VI) on the mineral surface.

Facet-dependent U(VI) removal of hematite with confined ferrous ions

The presence of ferrous minerals has been demonstrated to have a significant impact on the destiny, migration, and availability of uranyl (U(VI)) in natural surroundings. The iron oxide/Fe(II) system is a multifaceted iron reduction system anchored to surfaces, encompassing various forms of iron and ferrous ions. Several studies have investigated the effectiveness of adsorbed ferrous iron on iron-based minerals to facilitate the reduction of heavy metal ions and radioactive nuclides. A range of techniques for characterization, including X-ray photoelectron spectroscopy (XPS) and Mössbauer spectroscopy, were employed to explore the process of U(VI) adsorption and deposition, focusing on the limited region containing ferrous iron on the exposed crystalline surface of hematite. In this specific investigation, two kinds of hematite nanocrystals primarily exposing {001} and {012} crystal facets, referred to as HNPs and HNCs, were synthesized. Their ability to remove U(VI) was examined. Ferrous ions (Fe(II)) adsorbed onto the surface of hematite nanocrystals significantly enhanced the efficiency of U(VI) remediation. Furthermore, the HNCs/Fe(II) system showed better U(VI) reduction ability than the HNPs/Fe(II) system. Remarkably, HNCs produced and consumed more electrons and hydroxyl radicals, indicating a more intense response. This finding serves to highlight the significance of their role in interfacial effects and in predicting the spatial distribution of U(VI) in aqueous systems.

Facet-dependent electron transfer induces distinct arsenic reallocations on hematite

The interfacial electron transfer (ET) between electron shuttling compounds and iron (Fe) oxyhydroxides plays a crucial role in the reductive dissolution of Fe minerals and the fate of surface-bound arsenic (As). However, the impact of exposed facets of highly crystalline hematite on reductive dissolution and As immobilization is poorly understood. In this study, we systematically investigated the interfacial processes of the electron shuttling compound cysteine (Cys) on various facets of hematite and the reallocations of surface-bound As(III) or As(V) on the respective surfaces. Our results demonstrate that the ET process between Cys and hematite generates Fe(II) and leads to reductive dissolution, with more Fe(II) generated on {001} facets of exposed hematite nanoplates (HNPs). Reductive dissolution of hematite leads to significantly enhanced As(V) reallocations on hematite. Nevertheless, upon the addition of Cys, a raipd release of As(III) can be halted by its prompt re-adsorption, leaving the extent of As(III) immobilization on hematite unchanged throughout the course of reductive dissolution. This is due to that Fe(II) can form new precipitates with As(V), a process that is facet-dependent and influenced by water chemistry. Electrochemical analysis reveals that HNPs exhibit higher conductivity and ET ability, which is beneficial for reductive dissolution and As reallocations on hematite. These findings highlight the facet-dependent reallocations of As(III) and As(V) facilitated by electron shuttling compounds and have implications for the biogeochemical processes of As in soil and subsurface environments.

Elucidating the Role of Capping Agents in Facet-Dependent Adsorption Performance of Hematite Nanostructures

Organic capping agents are a ubiquitous and crucial part of preparing reproducible and homogeneous batches of nanomaterials, particularly nanocrystals with well-defined facets. Despite studies reporting surface ligands (e.g., capping agents) having a non-negligible role in catalytic behavior, their impact is less understood in contaminant adsorption, an important consideration given their potential to obfuscate facet-dependent trends in performance. To ascribe observed behaviors to the facet or the ligand, this report evaluates the impact of poly(N-vinyl-2-pyrrolidone) (PVP), a commonly utilized capping agent, on the adsorption performance of nanohematite particles of varying prevailing facet in the removal of selenite (Se(IV)) as a model system. The PVP capping agent reduces the available surface area for contaminant binding, thus resulting in a reduction in overall Se(IV) adsorbed. However, accounting for the effects of surface area, {012}-faceted nanohematite demonstrates a significantly higher sorption capacity for Se(IV) compared with that of {001}-faceted nanohematite. Notably, chemical treatment is minimally effective in removing strongly bound PVP, indicating that complete removal of surface ligands remains challenging.

Hierarchical-Structured Fe2O3 Anode with Exposed (001) Facet for Enhanced Lithium Storage Performance

The hierarchical structure is an ideal nanostructure for conversion-type anodes with drastic volume expansion. Here, we demonstrate a tin-doping strategy for constructing Fe₂O₃ brushes, in which nanowires with exposed (001) facets are stacked into the hierarchical structure. Thanks to the tin-doping, the conductivity of the Sn-doped Fe₂O₃ has been improved greatly. Moreover, the volume changes of the Sn-doped Fe₂O₃ anodes can be limited to ~4% vertical expansion and ~13% horizontal expansion, thus resulting in high-rate performance and long-life stability due to the exposed (001) facet and the unique hierarchical structure. As a result, it delivers a high reversible lithium storage capacity of 580 mAh/g at a current density of 0.2C (0.2 A/g), and excellent rate performance of above 400 mAh/g even at a high current density of 2C (2 A/g) over 500 cycles, which is much higher than most of the reported transition metal oxide anodes. This doping strategy and the unique hierarchical structures bring inspiration for nanostructure design of functional materials in energy storage.

Regulating the exposed crystal facets of α-Fe2O3 to promote Fe2O3-modified biochar performance in heavy metals adsorption

α-Fe₂O₃ modified biochar (Fe₂O₃/BC) was prepared to remove Cu(II), Pb(II) and As(V). By adjusting the calcination temperature, the morphology and exposed crystal facets of α-Fe₂O₃ on the biochar were changed which further affected the adsorption performance. The kinetics and isotherms were investigated systematically to reveal adsorption effect of the adsorbent on Cu(II), Pb(II) and As(V). The results indicated that chemisorption process was the dominant adsorption mechanism. Fe₂O₃/BC-350 exhibited superior adsorption capacity for Cu(II) (258.22 mg/g) and Pb(II) (390.60 mg/g), and Fe₂O₃/BC-250 showed relatively good adsorption capacity for As(V) (5.78 mg/g). By adsorption mechanism analysis, electrostatic adsorption, ion exchange, precipitation and complexation were coexisted in the process of removing metal ions by Fe₂O₃/BC. The repeatability test and the effect of ion strength exhibited the strong stability of Fe₂O₃/BC. Meanwhile, density functional theory (DFT) calculations manifested that the (202) facet of α-Fe₂O₃ on Fe₂O₃/BC-350 possessed the lowest adsorption energies of Cu(II) and Pb(II). While for As(V), it was the (104) facet of α-Fe₂O₃ on Fe₂O₃/BC-250 that exhibited the lowest adsorption energy. DFT results revealed that different Fe₂O₃/BC had different adsorption affinities to various heavy metals. In general, this work not only prepared a promising adsorbent via a simple procedure, but also served as a reference for researchers in designing absorbents with specific active facet for efficient heavy metals remediation.

Structural-controlled formation of nano-particle hematite and their removal performance for heavy metal ions: A review

Hematite is ubiquitous in nature and holds great promise for a wide variety of applications in many frontiers of environmental issues such as heavy metal remediation in environment. Over the past decades, numerous efforts have been made to control and tailor the crystal structures of hematite to improve its adsorption performance for heavy metal ions (HMIs). It is now well established that the adsorption behavior of hematite nanocrystals is strongly affected by their particle sizes, crystal facet contributions, and defective structures. This review examined the size- and facet-dependent hematite, as well as the defective hematite according to their fabrication methods and growth mechanisms. Furthermore, the adsorption performance of various hematite particles for HMIs were introduced and compared to clarify the structure-active relationships of hematite. We also overviewed the advances in charge distribution (CD)-multisite complexation (MUSIC) modeling studies about the HMIs adsorption at the hematite-water interface and the binding parameters. The Present review systematically describes how the formation conditions impact the structural and surface properties of hematite particles, thereby providing new strategies for enhancing the performance of hematite for environmental remediation.

Composite Indium Tin Oxide Nanofibers with Embedded Hematite Nanoparticles for Photoelectrochemical Water Splitting

Hematite is a classical photoanode material for photoelectrochemical water splitting due to its stability, performance, and low cost. However, the effect of particle size is still a question due to the charge transfer to the electrodes. In this work, we addressed this subject by the fabrication of a photoelectrode with hematite nanoparticles embedded in close contact with the electrode substrate. The nanoparticles were synthesized by a solvothermal method and colloidal stabilization with charged hydroxide molecules, and we were able to further use them to prepare electrodes for water photo-oxidation. Hematite nanoparticles were embedded within electrospun tin-doped indium oxide nanofibers. The fibrous layer acted as a current collector scaffold for the nanoparticles, supporting the effective transport of charge carriers. This method allows better contact of the nanoparticles with the substrate, and also, the fibrous scaffold increases the optical density of the photoelectrode. Electrodes based on nanofibers with embedded nanoparticles display significantly enhanced photoelectrochemical performance compared to their flat nanoparticle-based layer counterparts. This nanofiber architecture increases the photocurrent density and photon-to-current internal conversion efficiency by factors of 2 and 10, respectively.

Metal Oxide Chemiresistors: A Structural and Functional Comparison between Nanowires and Nanoparticles

Metal oxide nanowires have become popular materials in gas sensing, and more generally in the field of electronic and optoelectronic devices. This is thanks to their unique structural and morphological features, namely their single-crystalline structure, their nano-sized diameter and their highly anisotropic shape, i.e., a large length-to-diameter aspect ratio. About twenty years have passed since the first publication proposing their suitability for gas sensors, and a rapidly increasing number of papers addressing the understanding and the exploitation of these materials in chemosensing have been published. Considering the remarkable progress achieved so far, the present paper aims at reviewing these results, emphasizing the comparison with state-of-the-art nanoparticle-based materials. The goal is to highlight, wherever possible, how results may be related to the particular features of one or the other morphology, what is effectively unique to nanowires and what can be obtained by both. Transduction, receptor and utility-factor functions, doping, and the addition of inorganic and organic coatings will be discussed on the basis of the structural and morphological features that have stimulated this field of research since its early stage.

Enhanced Photo-Fenton Activity of SnO2/α-Fe2O3 Composites Prepared by a Two-Step Solvothermal Method

The x-SnO₂/α-Fe₂O₃ (x = 0.04, 0.07, and 0.1) heterogeneous composites were successfully prepared via a two-step solvothermal method. These composites were systematically characterized by the X-ray diffraction technique, field emission scanning electron microscopy, an energy dispersive spectrometer, X-ray photoelectron spectroscopy and a UV–visible spectrometer. It was found that SnO₂ nanoparticles were uniformly decorated on the surface of α-Fe₂O₃ particles in these heterogeneous composites. A comparative study of methylene blue (MB) photodegradation by α-Fe₂O₃ and x-SnO₂/α-Fe₂O₃ composites was carried out. All x-SnO₂/α-Fe₂O₃ composites showed higher MB photodegradation efficiency than α-Fe₂O₃. When x = 0.07, the MB photodegradation efficiency can reach 97% in 60 min. Meanwhile, the first-order kinetic studies demonstrated that the optimal rate constant of 0.07-SnO₂/α-Fe₂O₃ composite was 0.0537 min⁻¹, while that of pure α-Fe₂O₃ was only 0.0191 min⁻¹. The catalytic mechanism of MB photodegradation by SnO₂/α-Fe₂O₃ was examined. The SnO₂ can act as a sink and help the effective transfer of photo-generated electrons for decomposing hydrogen peroxide (H₂O₂) into active radicals. This work can provide a new insight into the catalytic mechanism of the photo-Fenton process.

Chemical conversion based on the crystal facet effect of transition metal oxides and construction methods for sharp-faced nanocrystals

In-depth research has found that the nanocrystal facet of transition metal oxides (TMOs) greatly affects their heterogeneous catalytic performance, as well as the property of photocatalysis, gas sensing, electrochemical reaction, etc. that are all involved in chemical conversion processes. Therefore, the facet-dependent properties of TMO nanocrystals have been fully and carefully studied by combining systematic experiments and theoretical calculations, and mechanisms of chemical reactions are accurately explained at the molecular level, which will be closer to the essence of reactions. Evidently, as an accurate investigation on crystal facets, well-defined TMO nanocrystals are the basis and premise for obtaining relevant credible results, and shape-controlled synthesis of TMO nanocrystals thereby has received great attention and development. The success in understanding of facet-dependent properties and shape-controlled synthesis of TMO nanocrystals is highly valuable for the control of reaction and the design of high-efficiency TMO nanocrystal catalysts as well as other functional materials in practical applications.

High-Index Faceted Nanocrystals as Highly Efficient Bifunctional Electrocatalysts for High-Performance Lithium-Sulfur Batteries

Precisely regulating of the surface structure of crystalline materials to improve their catalytic activity for lithium polysulfides is urgently needed for high-performance lithium-sulfur (Li-S) batteries. Herein, high-index faceted iron oxide (Fe₂O₃) nanocrystals anchored on reduced graphene oxide are developed as highly efficient bifunctional electrocatalysts, effectively improving the electrochemical performance of Li-S batteries. The theoretical and experimental results all indicate that high-index Fe₂O₃ crystal facets with abundant unsaturated coordinated Fe sites not only have strong adsorption capacity to anchor polysulfides but also have high catalytic activity to facilitate the redox transformation of polysulfides and reduce the decomposition energy barrier of Li₂S. The Li-S batteries with these bifunctional electrocatalysts exhibit high initial capacity of 1521 mAh g^-1 at 0.1 C and excellent cycling performance with a low capacity fading of 0.025% per cycle during 1600 cycles at 2 C. Even with a high sulfur loading of 9.41 mg cm^-2, a remarkable areal capacity of 7.61 mAh cm^-2 was maintained after 85 cycles. This work provides a new strategy to improve the catalytic activity of nanocrystals through the crystal facet engineering, deepening the comprehending of facet-dependent activity of catalysts in Li-S chemistry, affording a novel perspective for the design of advanced sulfur electrodes.

Microstructure of Al-substituted goethite and its adsorption performance for Pb(II) and As(V)

Naturally occurring goethite commonly undergoes Al-substitution, while how changes in microstructure induced by Al-substitution affect the interactive reaction of Pb(II) or As(V) at the goethite-water interface remains poorly understood. This study reveals the structural properties of Al-substituted goethite and its adsorption behavior for Pb(II) and As(V) by multiple characterization techniques and Charge Distribution-Multisite Surface Complexation (CD-MUSIC) modeling. Al-substitution caused an obvious decrease in the length-to-width ratio in goethite particles and a slight decrease in the proportion of (110) facets. The presence of Al-O sites and higher surface roughness induced by Al-substitution contributed to a higher inner Stern layer capacitance (C₁) and surface charge density of goethite. CD-MUSIC modeling results further revealed that the affinity constant of Pb(II) complex (log K_Pb) at the goethite-water interface and the adsorption capacity of goethite for Pb(II) decreased with increasing amount of Al-substitution, while an opposite tendency was observed for As(V) adsorption. The dominant species of both Pb(II) and As(V) on goethite were bidentate complexes, and Al-substitution had a minor impact on the abundance of Pb(II) and As(V) complexes on the surface of goethite. Overall, these experimental and modeling results provide new and important insights into the interfacial reactivity of Al-substituted goethite and facilitate the prediction of the environmental fate of heavy metals.

The effect of different crystalline phases of In2O3 on the ozone sensing performance

Crystalline phase regulation could optimize the band gap, which has a great impact on the amount of chemisorbed gas molecules on the gas sensing materials. Herein, a facile route of hydrothermal method followed by calcination treatment was used to synthesize cubic bixbyite-type (C-In₂O₃), rhombohedral corundum-type (Rh-In₂O₃) and the mixed phase In₂O₃ (Rh+C-In₂O₃). The band gap of C-In₂O₃ was narrowed to a suitable value (2.38 eV) and the relative percentage of chemisorbed oxygen was enhanced (31.8%). The sensing results to ozone (O₃) indicated that the C-type structure stood out. The gas sensor based on C-In₂O₃ exhibited extraordinary O₃ sensing performances with a response of 5.7 (100 ppb) and an ultralow limit of detection of 30 ppb. The amazing results could be attributed to the narrow band gap and the enrichment of chemisorbed oxygen. This work inspires a new perspective to design highly sensitive and reliable O₃ sensors.

Morphology Engineering of Fullerene[C70 ] Microcrystals: From Perfect Cubes, Defective Hoppers to Novel Cruciform-Pillars

Controlled crystallization of fullerene molecules into ordered molecular assemblies is important for their applications. However, the morphology engineering of fullerene[C₇₀ ] assemblies is challenging, and complicated architectures have rarely been reported due to the low molecular symmetry of C₇₀ molecules, which makes their crystallization difficult to control and the low production yield as well. Herein, with the assistance of solvent intercalation, a general reprecipitation approach is reported to prepare morphologically controllable C₇₀ microcrystals with mesitylene as a good solvent and n-propanol as a poor solvent in one solvent system without replacing specific solvents. A series of C₇₀ microcrystals with high uniformity from perfect cubes and defective hoppers to novel cruciform-pillars are obtained by intentionally tuning C₇₀ concentration and the volume ratio of mesitylene to n-propanol. Among them, novel cruciform-pillar-shaped microcrystals are obtained for the first time by further decreasing the amount of mesitylene in the solvent-intercalated microcrystals. Notably, the C₇₀ concentration is a key parameter for the selective growth of C₇₀ hopper, rather than the volume ratio of mesitylene to n-propanol. Interestingly, the hopper-shaped microcrystals exhibit excellent photoluminescence properties relative to those of cubes and cruciform-pillars owing to the enhanced light absorption, proving their potential applications in optoelectronic devices. This study offers new insights into the morphology-controlled synthesis of other micro/nanostructured organic microcrystals and the fine tuning of photoluminescence properties of organic crystals.

Reaction Pathways of the Selective Catalytic Reduction of NO with NH3 on the α-Fe2O3(012) Surface: a Combined Experimental and DFT Study

Fe2O3-based catalysts have promising potential in the selective catalytic reduction (SCR) of NO with NH3 with the advantages of environmental friendliness, excellent medium-high SCR activity, good N2 selectivity, and high SO2 tolerance. However, the NH3-SCR mechanism over Fe2O3-based catalysts remains highly uncertain and controversial due to the complex nature of the SCR reaction. Herein, the NH3-SCR reaction pathways over the α-Fe2O3(012) surface are elucidated at the atomic level by density functional theory calculations and experimental measurements. We demonstrate that, different from the NH3 activation mechanism in numerous SCR catalytic systems, the reaction tends to follow the NO activation mechanism, in which NO activated at Fe sites reacts with NH3 to form a NH2NO intermediate and further decomposes into N2 and H2O, in synchronization with the formation of a surface OH group. Subsequently, the catalyst is regenerated by an O2-assisted surface-dehydrogenation process. The activation of NO as well as the formation of the NH2NO intermediate is the rate-determining step of the complete SCR cycle. This study enhances the atomic-level understanding toward the NH3-SCR reaction and provides insights for the development of Fe2O3-based SCR catalysts.

Gas sensing materials roadmap

Gas sensor technology is widely utilized in various areas ranging from home security, environment and air pollution, to industrial production. It also hold great promise in non-invasive exhaled breath detection and an essential device in future internet of things. The past decade has witnessed giant advance in both fundamental research and industrial development of gas sensors, yet current efforts are being explored to achieve better selectivity, higher sensitivity and lower power consumption. The sensing layer in gas sensors have attracted dominant attention in the past research. In addition to the conventional metal oxide semiconductors, emerging nanocomposites and graphene-like two-dimensional materials also have drawn considerable research interest. This inspires us to organize this comprehensive 2020 gas sensing materials roadmap to discuss the current status, state-of-the-art progress, and present and future challenges in various materials that is potentially useful for gas sensors.

Fulvic Acid-Mediated Interfacial Reactions on Exposed Hematite Facets during Dissimilatory Iron Reduction

Although the dual role of natural organic matter (NOM) as an electron shuttle and an electron donor for dissimilatory iron (Fe) reduction has been extensively investigated, the underlying interfacial interactions between various exposed facets and NOM are poorly understood. In this study, fulvic acid (FA), as typical NOM, was used and its effect on the dissimilatory reduction of hematite {001} and {100} by Shewanella putrefaciens CN-32 was investigated. FA accelerates the bioreduction rates of hematite {001} and {100}, where the rate of hematite {100} is lower than that of hematite {001}. Secondary Fe minerals were not observed, but the HR-TEM images reveal significant defects. The ATR-FTIR results demonstrate that facet-dependent binding mainly occurs via surface complexation between the surface iron atoms and carboxyl groups of NOM. The spectroscopic and mass spectrometry analyses suggest that organic compounds with large molecular weight, highly aromatic and unsaturated structures, and lower H/C ratios are easily adsorbed on Fe oxides or decomposed by bacteria in FA-hematite {001} treatment after iron reduction. Due to the metabolic processes of cells, a significant number of compounds with higher H/C and medium O/C ratios appear. The Tafel curves show that hematite {100} possessed higher resistance (4.1-2.6 Ω) than hematite {001} (3.5-2.2 Ω) at FA concentrations ranging from 0 to 500 mg L^-1, indicating that hematite {100} is less conductive during the electron transfer from reduced FA or cells to Fe oxides than hematite {001}. Overall, the discrepancy in the iron bioreduction of two exposed facets is attributed to both the different electrochemical activities of the Fe oxides and the different impacts on the properties and composition of OM. Our findings shed light on the molecular mechanisms of mutual interactions between FA and Fe oxides with various facets.

Design of highly sensitive and selective ethanol sensor based on α-Fe2O3/Nb2O5 heterostructure

The introduction of heterostructures is a new approach in gas sensing due to their easy and quick transport of charges. Herein, facile hydrothermal and solid-state techniques are employed to synthesize an α-Fe₂O₃/Nb₂O₅ heterostructure. The morphology, microstructure, crystallinity and surface composition of the synthesized heterostructures are investigated by scanning electron microscope, transmission electron microscope, x-ray diffraction, x-ray photoelectron spectroscopy and Brunauer-Emmett-Teller analyses. The successful fabrication of the heterostructures was achieved via the mutual incorporation of α-Fe₂O₃ nanorods with Nb₂O₅ interconnected nanoparticles (INPs). A sensor based on the α-Fe₂O₃(0.09)/Nb₂O₅ heterostructure with a high surface area exhibited enhanced gas-sensing features, maintaining high selectivity and sensitivity, and a considerable recovery percentage towards ethanol gas. The sensing response of the α-Fe₂O₃(0.09)/Nb₂O₅ heterostructure at lower operating temperature (160 °C) is around nine times higher than a pure Nb₂O₅ (INP) sensor at 180 °C with the flow of 100 ppm ethanol gas. The sensors also show excellent selectivity, good long-term stability and a rapid response/recovery time (8s/2s, respectively) to ethanol. The superior electronic conductivity and upgraded sensitivity performance of gas sensors based on the α-Fe₂O₃(0.09)/Nb₂O₅ heterostructure are attributed due to its unique structural features, high specific surface area and the synergic effect of the n-n heterojunction. The promising results demonstrate the potential application of the α-Fe₂O₃(0.09)/Nb₂O₅ heterostructure as a good sensing material for the fabrication of ethanol sensors.

Solvent-assisted synthesis of dendritic cerium hexacyanocobaltate and derived porous dendritic Co3O4/CeO2 as supercapacitor electrode materials

Here, we report a solvent-mediated synthetic route for preparing cerium hexacyanocobaltate with a dendritic shape. The porous dendritic Co₃O₄/CeO₂ was prepared after annealing at 500 °C, served as a supercapacitor electrode.

Toward Informed Design of Nanomaterials: A Mechanistic Analysis of Structure-Property-Function Relationships for Faceted Nanoscale Metal Oxides

Nanoscale metal oxides (NMOs) have found wide-scale applicability in a variety of environmental fields, particularly catalysis, gas sensing, and sorption. Facet engineering, or controlled exposure of a particular crystal plane, has been established as an advantageous approach to enabling enhanced functionality of NMOs. However, the underlying mechanisms that give rise to this improved performance are often not systematically examined, leading to an insufficient understanding of NMO facet reactivity. This critical review details the unique electronic and structural characteristics of commonly studied NMO facets and further correlates these characteristics to the principal mechanisms that govern performance in various catalytic, gas sensing, and contaminant removal applications. General trends of facet-dependent behavior are established for each of the NMO compositions, and selected case studies for extensions of facet-dependent behavior, such as mixed metals, mixed-metal oxides, and mixed facets, are discussed. Key conclusions about facet reactivity, confounding variables that tend to obfuscate them, and opportunities to deepen structure-property-function understanding are detailed to encourage rational, informed design of NMOs for the intended application.

Experimental study of superheating of tin powders

An unstable energy-unbalanced state such as superheating or supercooling is often unexpectedly observed because a factor of energy depends not only on the temperature but is a product of temperature (T) and entropy (S). Thus, at the same temperature, if the entropy is different, the total energy of the system can be different. In such cases, the temperature-change-rate cannot match the entropy-change-rate, which results in a hysteresis curve for the temperature/entropy relationship. Due to the difference between the temperature- and entropy-change-rates, properties of a material, such as the boiling and freezing points, can be extended from point to area. This study confirmed that depending on the heating rate, tin powders exhibit different melting points. Given the contemporary reinterpretation of many energy-non-equilibrium phenomena that have only been discussed on the basis of temperature, this study is expected to contribute to the actual expansion of scientific/engineering applications.

Carbon Deposition on Hematite (α-Fe2O3) Nanocubes by Annealing in the Air: Morphology Study with Grazing Incidence Small Angle X-ray Scattering (GISAXS)

GISAXS has been used to study morphology change of α-Fe2O3 nanocubes after annealing processes. A submonolayer of the nanocubes was deposited on a Si(100) substrate. While an annealing at 400 °C in vacuum does not change a GISAXS pattern from as-prepared nanocubes submonolayer, subsequent annealing in air at the same temperature altered the GISAXS pattern significantly. SEM images showed that the air-annealed nanocubes were coated with thin layers which were identified as amorphous carbon layers based on Raman measurements. GISAXS simulations from morphologies of nanocube with 38 nm side-length and core-shell (nanocube-core and 7 nm thick carbon-shell) reproduced measured patterns from the vacuum- and the air-annealed nanocubes, respectively. The current study provides new approach for in-situ characterization of carbon deposition on a uniform shape nanoparticle through monitoring of deposited carbon thickness.

Facet- and defect-engineered Pt/Fe2O3 nanocomposite catalyst for catalytic oxidation of airborne formaldehyde under ambient conditions

Formaldehyde (HCHO) is one of the most infamous indoor pollutants that imposes a great threat to human health. Herein, we report the development of a high-performance Pt/Fe₂O₃ catalyst for HCHO oxidation employing a facet- and defect-engineering strategy, with special focus on the surface structure effect of α-Fe₂O₃ on the catalytic properties. A supported Pt nanocatalyst on hollow octadecahedral α-Fe₂O₃ with exclusively exposed {113} and {104} facets was prepared using a hydrothermal method followed by impregnation-reduction treatment. The high-index facets of α-Fe₂O₃ render the formation of abundant oxygen vacancies and an improved dispersion of Pt nanoparticles. This led to an increased Pt/O-vacancy coexistence in close proximity, which collaboratively promote the generation of active oxygen and surface OH species. As a consequence, the Pt/Fe₂O₃-HO catalyst exhibited impressively high and stable activity towards HCHO oxidation at room temperature, which was five-fold higher than that of the supported Pt catalyst on commercial α-Fe₂O₃.

Complete Degradation of Gaseous Methanol over Pt/FeOx Catalysts by Normal Temperature Catalytic Ozonation

Normal temperature catalytic ozonation (NTCO) is a promising yet challenging method for the removal of volatile organic compounds (VOCs) because of limited activity of the catalysts at ambient temperature. Here, we report a series of Pt/FeO_x catalysts prepared by the co-precipitation method for NTCO of gaseous methanol. All samples were found to be active and among them, the Pt/FeO_x-400 (calcined at 400 °C) catalyst with a Pt cluster loading of 0.2% exhibited the highest activity, able to completely convert methanol into CO₂ and H₂O at 30 °C. Extensive experimental research suggested that the superior catalytic activity could be attributed to the highly dispersed Pt clusters and an appropriate molar ratio of Pt⁰/Pt²⁺. Furthermore, electron paramagnetic resonance and density functional theory computational studies revealed the mechanism that the Pt/FeO_x-400 catalyst could activate O₃ and water effectively to produce hydroxyl radicals responsible for the catalytic oxidation of methanol. The findings of this work may foster the development of technologies for normal temperature abatement of VOCs with low energy consumption.

Facet-dependent activity of hematite nanocrystals toward the oxygen evolution reaction

Hematite showed facet-dependent OER activity and its origin was investigated based on in situ UV-vis absorption measurements and theoretical calculations.

Single-Crystal α-Fe2O3 with Engineered Exposed (001) Facet for High-Rate, Long-Cycle-Life Lithium-Ion Battery Anode

Designing electrode materials with engineered exposed facets provides a novel strategy to improve their electrochemical properties. However, the controllability of the exposed facet remains a daunting challenge, and a deep understanding of the correlation between exposed facet and Li⁺-transfer behavior has been rarely reported. In this work, single-crystal α-Fe₂O₃ hexagonal nanosheets with an exposed (001) facet are prepared with the assistance of aluminum ions through a one-step hydrothermal process, and structural characterizations reveal an Al³⁺-concentration-dependent-growth mechanism for the α-Fe₂O₃ nanosheets. Furthermore, such α-Fe₂O₃ nanosheets, when used as lithium-ion battery anodes, exhibit high specific capacity (1261.3 mAh g^-1 at 200 mA g^-1), high rate capability (with a reversible capacity of approximately 605 mAh g^-1 at 10 A g^-1), and excellent cyclic stability (with a capacity of over 900 mAh g^-1 during 500 cycles). The superior electrochemical performance of α-Fe₂O₃ nanosheets is attributed to the pseudocapacitive behavior, Al-doping in the α-Fe₂O₃ structure, and improved Li⁺-transfer property across the (001) facet, as elucidated by first-principles calculations based on density functional theory. These results reveal the underlying mechanism of Li⁺ transfer across different facets and thus provide insights into the understanding of the excellent electrochemical performance.

Facet-Specific Photocatalytic Degradation of Organics by Heterogeneous Fenton Chemistry on Hematite Nanoparticles

Hematite nanoparticles are abundant in the photic zone of aquatic environments, where they play a prominent role in photocatalytic transformations of bound organics. Here, we examine the photocatalytic degradation of rhodamine B by visible light using two different structurally well-defined hematite nanoparticle morphologies. In addition to detailed solid characterization and aqueous kinetics measurements, we also exploit species-selective scavengers in electron paramagnetic resonance spectroscopy to sequester specific reaction channels and thereby assess their impact. The photodegradation rates for nanoplates dominated by {001} facets and nanocubes dominated by {012} facets were 0.13 and 0.7 h^-1, respectively, and the turnover frequencies for the active sites on {001} and {012} were 7.89 × 10^-3 and 3.07× 10^-3 s^-1, yielding apparent activation energies of 17.13 and 24.94 kcal/mol within the energetic span model, respectively. Facet-specific differences appear to be directly not linked with the simple aerial cation site density but instead with their extent of undercoordination. By establishing this linkage, the findings lay a foundation for predicting the photocatalytic degradation efficiency for the myriad of possible hematite nanoparticle morphologies and more broadly help unveil key reactions at the interface that may govern photocatalytic organic transformations in natural and engineered aquatic environments.

High-index faceted metal oxide micro-/nanostructures: a review on their characterization, synthesis and applications

Exposed high-index facets with a high density of low-coordinated atoms (including edges, steps and kinks) can provide more high-active sites for chemical reactions. Therefore, great progress has made in the facet-dependent application of various high-index faceted micro-/nanostructures in the past decades. Previous review papers have mainly highlighted the advances in high-index faceted noble metal nanocrystals. However, to date, there is no specialized review paper on high-index faceted metal oxides and their facet-dependent applications. Thus, in this review, the existing high-index faceted metal oxide micro-/nanostructures, including Cu2O, TiO2, Fe2O3, ZnO, SnO2 and BiVO4, are reviewed based on their characterization, synthesis engineering and facet-dependent applications in the fields of catalysis, sensors, lithium-ion batteries and carbon monoxide oxidation. Also, several challenges and perspectives are presented. Hopefully, this review article will be a useful guideline and resource for researchers currently concentrating on high-index faceted metal oxides to design and synthesize novel micro-/nanostructures for overcoming the practical environment-, biology- and energy-related problems.

Counter Anion-Directed Growth of Iron Oxide Nanorods in a Polyol Medium with Efficient Peroxidase-Mimicking Activity for Degradation of Dyes in Contaminated Water

Development of nanozymes, which are nanomaterials with intrinsic enzymatic properties, has emerged as an appealing alternative to the natural enzymes with tremendous application potential from the chemical industry to biomedicine. The self-assembled growth of micrometer-sized oxide materials with controlled nonspherical shapes can be an important tool for enhancing activity as artificial enzymes, as the formation of these superstructures often results in high surface area with favorable impact on catalytic activity. Herein, the growth of rod-shaped Fe3O4 microstructures via a one-pot microwave-based method and using a water-poly(ethylene glycol) mixture as a solvent is reported, without the involvement of external shape-directing agents. The precursor metal salt played a key role in the size, shape, and phase selective evolution of iron oxide micro/nanomaterials. Whereas self-assembled microrod superstructures were obtained using Fe(NO3)3 as the metal salt precursor, use of FeCl3 or Fe-acetate as precursors afforded hollow Fe2O3 microparticles and Fe3O4 nanoparticles, respectively. A graphitic layer was deposited on the Fe3O4 surface, imparting a negative surface charge as a result of a high-temperature treatment of poly(ethylene glycol). The rod-shaped Fe3O4 microcrystals show efficient peroxidase-mimicking activity toward 3,3,5,5'-tetramethylbenzidine and pyrogallol as peroxidase substrates with a Michaelis-Menten rate constant (K m) value of 0.05 and 0.52 mM, respectively. The proficient enzyme mimicking behavior of these magnetic superstructures was further explored for the degradation of organic dyes that includes rhodamine B, methylene blue, and methyl orange with a rate constant (k) of 0.038, 0.011, and 0.007 min-1 respectively, using H2O2. This fast and simple method could help to develop a new pathway for differently shaped oxide nanoparticles in a sustainable and economical manner that can be harnessed as nanozymes for industrial as well as biological applications.

Effect of Cation Substitution on the Gas-Sensing Performances of Ternary Spinel MCo2O4 (M = Mn, Ni, and Zn) Multishelled Hollow Twin Spheres

Advanced sensing materials are in high demand for sensitive, real-time, and continuous detection of gas molecules for gas sensors, which have been becoming an effective tool for environmental monitoring and disease diagnosis. Cobalt-containing spinel oxides are promising sensing materials for the gas-sensing reaction owing to their element abundance and remarkable activity. Structural and component properties can be modulated to optimize the sensing performances by substituting Co with other transition metals. Herein, a systematic study of spinel MCo₂O₄ oxides (M = Mn, Ni, and Zn) toward gas sensing is presented. Results show that ZnCo₂O₄ materials with a multishelled hollow twin-sphere structure obtained excellent sensing performances to formaldehyde and acetone at different temperatures. The replacement of Co with Zn in the lattice improves the oxygen-chemisorbing ability, which allows new opportunities to synthesize and design highly sensitive chemical sensors.

Toward Realizing Multifunctionality: Photoactive and Selective Adsorbents for the Removal of Inorganics in Water Treatment

Persistent and potentially toxic inorganic oxoanions (e.g., arsenic and selenium) are one class of contaminants of concern in drinking water for which treatment technologies must be improved. Effective removal of these oxoanions is made difficult by the varying adsorption affinity of the different oxidation states, as well as the presence of background ions with similar chemical structure and behavior that strongly compete for adsorption sites, greatly reducing removal efficiencies. Recent studies pointing to the negative health effects of inorganic oxoanion contaminants have resulted or are expected to result in new regulations lowering their allowable maximum concentration level (MCL) in drinking water. While these regulations are intended to protect human and environmental health, they must also allow for balanced economic costs. As such, the MCLs are often set at levels that are not as health protective due to high treatment costs that continue to present a significant challenge for small (500-3300 people) to very small (25-500 people) communities. In this Account, we focus on the development of novel cost-effective, sustainable, and efficient multifunctional and selective adsorbents that offer solutions to the above challenges through two platforms: nanoenabled and transition-metal cross-linked chitosan (TMCC) and crystal facet engineered nanometal oxides (NMO). These complementary platforms offer treatment solutions at different scales and flow rates (e.g., in a point-of-use device versus a small-scale community system). Multifunctional adsorbents combine processes that traditionally require multiple steps offering the potential for reducing treatment time and costs. Development of selective adsorbents can greatly increase removal efficiencies of target contaminants by either promoting their adsorption or hindering adsorption of competitive ions. The following sections describe (1) synthesis of novel nanoenabled waste sourced bioadsorbents; (2) development of multifunctional adsorbents to simultaneously photo-oxidize arsenite and adsorb arsenate; (3) development of a selective adsorbent for removal of arsenate and selenite over phosphate; (4) investigations of the conventional wisdom that increased surface area yields increased oxoanion removal using selenium sorption on nanohematite as a case study; and (5) crystal engineering of nanohematite to promote selenite adsorption. The novel technologies developed through these research efforts can serve as templates for the creation of future adsorbents tailored for use targeting other oxoanion contaminants of interest.

Surface-Controlled Photocatalysis and Chemical Sensing of TiO2, α-Fe2O3, and Cu2O Nanocrystals

A relatively new approach to the design of photocatalytic and gas sensing materials is to use the shape-controlled nanocrystals with well-defined facets exposed to light or gas molecules. An abrupt increase in a number of papers on the synthesis and characterization of metal oxide semiconductors such as a TiO2, α-Fe2O3, Cu2O of low-dimensionality, applied to surface-controlled photocatalysis and gas sensing, has been recently observed. The aim of this paper is to review the work performed in this field of research. Here, the focus is on the mechanism and processes that affect the growth of nanocrystals, their morphological, electrical, and optical properties and finally their photocatalytic as well as gas sensing performance.

Interface engineered surface morphology evolution of Au@Pd core-shell nanorods

Engineering the interfacial structure of bimetallic nanocrystals is an effective method to improve their electrocatalytic performances. Here, we design a facile strategy for controlling the surface morphology evolution of Au@Pd core-shell nanorods by adjusting the solution supersaturation. The Pd shell of the as-prepared Au@Pd bimetallic nanorods can be modulated from a (111) facet-exposed island to a (100) facet-exposed conformal shell. The conformal shell structure exhibited enhanced catalytic performance toward the ethanol oxidation reaction, while the core-island structure possessed better catalytic stability. This work provides a facile method for interfacial engineering of bimetallic nanocrystals with desired morphology and properties.

Identification of Facet-Governing Reactivity in Hematite for Oxygen Evolution

Unveiling the impact of a single parameter on the catalytic descriptor is fundamental to guide rational design principles for high-activity catalysts. Facets with distinct surface coordination that exhibit a central role in the kinetics modulation (reactivity) of surface electrochemistry, have remained elusive in oxygen evolution reactions (OERs). Here, the relationship between the predominant facets and catalytic reactivity is revealed, and it is recognized that facets decisively govern the oxygen evolution activity descriptor in hematite nanocrystals. Specifically, the hematite shows facet-dependent activity that follows the computed binding energy of surface-oxygenated intermediates. Moreover, a lower kinetics energy barrier is observed on a highly coordinated surface, both experimentally and computationally, in the light of molecular orbital principles. Consequently, a record-low overpotential and Tafel slope in iron oxides toward OER are manifested, competing against the benchmark binary transition metal oxide electrocatalysts and expelling the stereotype of the passive oxygen evolution activity of iron oxides. Significantly, the identification of facet-governing reactivity, construction of favorable facets, and strategic regulation of surface covalency enlighten design strategies for highly active catalysts.

Bioresorbable Silicon Nanomembranes and Iron Catalyst Nanoparticles for Flexible, Transient Electrochemical Dopamine Monitors

A strategy of materials synthesis, characteristic evaluations, and manufacturing process for a mechanically elastic, biologically safe silicon-based dopamine detector that is designed to be completely transient, i.e., dissolved in water and/or biofluids, potentially in the brain after a desired period of operation, is introduced. Use of inexpensive, bioresorbable iron (Fe)-based nanoparticles (NPs) is one of the attractive choices for efficient catalytic oxidation of dopamine as an alternative for noble, nontransient platinum (Pt) nanoparticles, based on extensive studies of synthesized materials and catalytic reactions. Arrays of transient dopamine sensors validate electrochemical functionality to determine physiological levels of dopamine and to selectively sense dopamine in a variety of neurotransmitters, illuminating feasibilities for a higher level of soft, transient electronic implants integrated with other components of overall system.

Toward Rationally Designing Surface Structures of Micro- and Nanocrystallites: Role of Supersaturation

Tailoring the surface structures of nanocrystals is an exciting research area on account of appealing surface-dependent properties in various applications. Although significant progress has been made in recent years, current synthetic approaches are mainly dependent upon trial and error because of the ambiguous roles of various influencing factors in complicated environments. Therefore, a general theory for predicting and guiding the rationally controlled synthesis of micro- and nanocrystallites with specific surface structures is highly desired. Of note, previous research attention was mainly focused on the crystal growth in near equilibrium conditions. However, in supersaturated growth environments (nonequilibrium conditions), the corresponding crystal growth theories are still limited. Recently, the supersaturation-controlled surface structure strategy, which is derived from thermodynamics and the Thomson-Gibbs equation, has opened up a new avenue for the control the surface structures of crystals. This strategy involves manipulating the supersaturation of growth units to control the surface structure of micro- and nanocrystallites, as the surface energy of exposed facets is correlated to the supersaturation of growth blocks. Based on the proposed theory, micro- and nanocrystallites with various surface structures, especially high-energy facets, have been successfully synthesized by our group and other researchers in past years. In order to draw lessons from previous studies, it is imperative to give a timely research account related to the supersaturation strategy and corresponding applications in controlling surface structures of different crystallites. In this Account, we explore the supersaturation-controlled surface structure strategy to construct functional nanomaterials with desired architectures. First, we highlight the role of supersaturation of growth units from theoretical analysis after a short introduction of fundamental principles for crystal growth. Then, some detailed cases concerning evolution of surface structures are presented to highlight the key experimental factors involved in manipulating the supersaturation of growth units during synthetic processes. These factors include solvents, reaction rates, and additives in wet chemical routes as well as overpotential in electrochemical routes. In addition, we briefly discuss the role of supersaturation in growth kinetics with focus on explaining the formation of spherical micro- and nanocrystallites at extremely high supersaturation. Finally, a general summary of the supersaturation-dependent surface structure control and future prospects in this field are provided. It is expected that this Account will deepen the current understanding on fundamental principles behind the control of surface structures of micro- and nanocrystallites, which can help us to construct desirable nanomaterials and promote their practical applications.

Bandgap control of α-Fe2O3 nanozymes and their superior visible light promoted peroxidase-like catalytic activity

Iron oxide nanoparticles (NPs) possessing peroxidase-like catalytic activity have been widely explored in recent decades, owing to their high stability against harsh conditions, low cost, flexibility in structure design and composition, adjustable activities and excellent biocompatibility in comparison with natural enzymes. Recently, a lot of great achievements have been made in this field of iron oxide nanozymes, however, this research has now reached a bottleneck in that the maximum activity enhancement is difficult to achieve via a material design. Hence, in this work, visible light was introduced to improve the peroxidase-like activity of Fe₂O₃ NPs synthesized via a combination of electrospinning technology and hydrothermal reaction. Our results showed that with the assistance of visible light, Fe₂O₃ NPs exhibited at least 2.2-fold higher peroxidase activity than those tested under darkness, confirming the superiorly visible light promoted peroxidase-like catalytic activity of Fe₂O₃ NPs. Furthermore, the affinity and maximum reaction velocity of Fe₂O₃ nanoflowers (bandgap = 1.78 eV) towards 3,3',5,5'-tetramethylbenanozymeidine (TMB) were at least over 3.7 and 4.3 times greater than in Fe₂O₃ nanocubes (bandgap = 2.08 eV), suggesting that the reaction performance of semiconductors could be controlled by proper adjustment of the bandgap. Moreover, the Fe₂O₃ NPs were also successfully utilized to detect glucose. Herein, we believe that the present work exhibits a fascinating perspective for peroxidase-like catalytic fields.