Molecular organogels. Soft matter comprised of low-molecular-mass organic gelators and organic liquids

Developing Supramolecular Metallogel Derived from Pd2L4 Cage Molecule for Delivering an Anti-Cancer Drug to Melanoma Cell B16-F10

Supramolecular gels are an important class of materials that are promising for its wide range of applications including drug delivery. While supramolecular gels are intrinsically porous because of the 3D nano-matrix (gel matrix) that is being formed due to supramolecular self-assembly process involving the gelator molecules during gelation, additional nanopores can be introduced to the overall gel if the gelator molecule itself holds molecular cavity such as metal-organic-cage (MOC) molecules. A MOC having the molecular formula [(Pd2L24).4NO3].3H2O.2DMF.MeOH (Pd-cage) (L2=5-Azido-N,N'-di-pyridin-3-yl-isophthalamide) was successfully synthesized and characterized by FT-IR, 1H NMR, ESI-MS and single crystal X-ray diffraction. Stimuli-reversible supramolecular metallogel PdG could easily be formed from Pd-cage in DMSO/water mixture. The molecular cage of Pd-cage was demonstrated to be available for loading an anti-cancer drug namely doxorubicin (DOX). Subsequently, DOX was also loaded within PdG and delivered to melanoma cell line B16-F10 displaying significant anti-cancer activity as revealed by both MTT and scratch assay. Rheoreversibility of PdG and its ability to load and deliver DOX to cancer cells clearly raised hope for developing this metallogel further as topical anticancer gel.

Crystal to Hydrogel Transformation in S-Benzyl-L-Cysteine-Containing Cyclic Dipeptides - Nanostructure Elucidation and Applications

Cyclic dipeptides (CDPs) are crucial building blocks for a range of functional nanomaterials due to their simple chemical structure and high molecular stability. In this investigation, we synthesized a set of S-benzyl-L-cysteine-based CDPs (designated as P1-P6) and thoroughly examined their self-assembly behavior in a methanol-water solvent to elucidate the relationship between their structure and gelation properties. The hydrophobicity of the amino acids within the CDPs was gradually increased. The present study employed a comprehensive array of analytical techniques, including NMR, FT-IR, AFM, thioflavin-T, congo-red CD, X-ray crystallography, and biophysical calculations like Hirshfield Surface analysis and DFT analysis. These methods revealed that in addition to hydrogen bonding, the hydrophobic nature of the amino acid side chain significantly influences the propensity of CDPs to form hydrogels. Each CDP yielded distinct nanofibrillar networks rich in β-sheet structures, showcasing unique morphological features. Moreover, we explored the practical application of these CDP-based hydrogels in water purification by utilizing them to remove harmful organic dyes from contaminated water. This application underscores the potential of CDPs in addressing environmental challenges, offering a promising avenue for the future development of these materials in water treatment technologies.

Investigation of the synthesis, gelation potential, and drug-loading capacities of two novel amides

This study consists of four steps. In the first, two different biocompatible organogelators were synthesized, starting with the L-isoleucine amino acid to obtain amide compounds. In the second step, the gelation potential of synthesized organogelators with fatty acid esters and organic solvents was investigated. These esters were chosen as gelation liquids due to their biocompatibility and also their penetration-enhancing properties when the drug is administered via the skin. After the minimum gel concentrations (MGCs) of the organogelators were determined, the melting point of gel T g was found, and then, ΔH g gelation enthalpy values were found by means of the Van't Hoff equation. In addition to the gelation abilities and capacities of the organogelators being thus synthesized, their thermal stabilities were also determined. In the third stage of the study, the network which occurred during the formation of the gels was screened by an SEM device, and their characterizations were determined. In the study's fourth stage, the gels were loaded with ibuprofen and naproxen-known for their non-steroidal anti-inflammatory and analgesic effects-and their drug-loading capacities were thus determined.

Nanoscale assembly of enantiomeric supramolecular gels driven by the nature of solvents

Understanding the key parameters that control the self-assembly process is critical to predict self-assembly modes in multi-component systems, which will lead to the development of nanofibrous materials with tuneable properties. Enantiomeric amino acid-based low-molecular-weight gelators (LMWGs) were mixed in polar (polar protic) and aromatic apolar (aromatic) solvents and compared to their individual counterparts to probe the effect of solvent polarity on the self-assembly process. Scanning electron microscopy (SEM) reveals that xerogels of individual components display hollow needles in polar protic solvents, while chiral coils are observed in aromatic solvents. In contrast, the multi-component gel displays hollow needle morphologies in both solvents, indicating similar morphologies in polar protic solvents but an entirely different nanostructure for the individual gel networks in aromatic solvents. PXRD experiments performed on the dried gels showed that the nature of the solvents plays a vital role in the co-assembly process of multi-component gels. The self-assembly modes and the gel state structure of the gels are analysed by wide-angle X-ray diffraction (WAXS) and small-angle neutron diffraction (SANS), which reveals that the mixed gel undergoes different co-assembly modes depending on the nature of the solvent systems. This study shows that different co-assembly modes can be achieved for structurally similar components by varying the solvent polarity, demonstrating the importance of solvent choice in the self-assembly process of multi-component gels.

Silver Dendritic Gels with Luminescence and Aggregation-Induced Emission Effect

This work reports on a novel family of silver metallogels based on discrete coordination complexes. Structurally, they consist of dendrimers containing a trinuclear silver metallacycle at the core, with the general formula [M(μ-pz)]3, and poly(benzyl)ether branched structures with different numbers or terminal alkoxy chains at the periphery. These silver metallodendrimers are able to gel low-polarity solvents such as dodecane or cyclohexane, giving rise to luminescent organogels at room temperature with the property of aggregation-induced emission (AIE). This property means that in solution or the sol state, they are weak emitters, but in the gel state, luminescence is considerably increased. In this particular case, they exhibit blue luminescence. Two different dendritic scaffolds have been studied, finding significant differences in solubility, gel formation and dependence of luminescence on temperature. The results show that properly tailored silver gelators can show luminescence in the gel state.

Solvent selective gelation of cetyltrimethylammonium bromide: structure, phase evolution and thermal characteristics

We report herein the gelation behaviour of cetyltrimethylammonium bromide (CTAB), a cationic surfactant, in a variety of solvent compositions. A turbid gel of CTAB in a binary solvent mixture at a critical composition was observed to be 1 : 3 v/v toluene : water. The molecular structure of the as-formed gel was investigated by X-ray diffraction and microscopic techniques, namely, optical and polarizing microscopy, scanning electron microscopy and small-angle X-ray scattering (SAXS). The phase evolution has been studied using UV-visible transmittance measurements and the thermal characteristics of the gel by differential scanning calorimetry measurements. SAXS studies, in conjunction with molecular modelling, revealed the gel to assemble as lamellae with high interdigitation of bilayer assembly of CTAB molecules with predominant non-covalent interactions, where the gel lamellae were inferred from the interplanar spacings. Rheological studies revealed the viscoelastic nature of the CTAB gels. The ability to form a gel has been evaluated in several polar solvents, such as methanol and chloroform, and non-polar solvents, such as toluene and carbon tetrachloride.

Transparent Organogels as a Medium for the Light-Induced Conversion from Spiropyran to Merocyanine

Low-molecular-weight peptide gelators are a versatile class of compounds able to form gels under a variety of conditions, even via simple ultrasound sonication. In this paper, the ability of Boc-L-Phe-D-Oxd-L-Phe-OBn to gelate three organic solvents (toluene, tert-butyl methyl ether, and ethanol) was evaluated. The rheological behaviour of the materials was assessed via strain sweep analysis, while the fibrous network was analysed via optical microscopy on the wet gels. The gel obtained from toluene is a highly transparent material, and the one from ethanol appears translucent, while the one from tert-butyl methyl ether is opaque. These gels were used to study the reversible light-induced transformation from spyropiran (SP) to merocyanine (MC) and back, as a model system to check the effect of the gel medium onto the rection kinetic. We observed that the solvent used to form the organogels has a crucial effect on the reaction, as gels from aprotic solvents stabilize the SP form, while the ones from protic solvents stabilize the MC form. We thus obtained a solid support to stabilize the two photochromic species just by changing the solvent polarity. Moreover, we could demonstrate that the self-assembled gels do not interfere with the light-driven conversion process, either starting from SP or MC, thus representing a valid and economical photochromic material.

Triggering gel-sol transition by weak magnetic field

The self-assembly of small and always chiral molecules into fiber-like structures is a mysterious process, as the physics underlying such self-assembly is unclear. The energy necessary for this process exceeds the one provided by common dispersion interactions and hydrogen bonding. The recent results obtained by the scientific group of Prof. Naaman from the Weizmann Institute of Science fed light on the nature of forces providing for the self-assembly of chiral molecules and attributed these forces to spin-exchange interactions. Therefore, the self-assembly of chiral molecules should be magneto-sensitive. We found such sensitivity in solutions of trifluoroacetylated α -amino alcohols, and the process was inhibited by the magnetic field when fibers grew on the surface of the substrate. On the contrary, in bulk, the self-assembly was enhanced by the magnetic field and led to the formation of a dense gel, while no gelation was observed in the absence of the external magnetic field. The latter observations are the theme of this short report, aimed to declare the effect itself but not pretend to describe it in full.

Facile one-pot multicomponent synthesis of peptoid based gelators as novel scaffolds for drug incorporation and pH-sensitive release

Infections caused by bacteria are the primary cause of illness and death globally, and antibiotics are the most commonly used medications to treat them. However, there are certain inherent problems in administering these drugs without any changes to their effectiveness. In order to sustain the targeted dosage over time, the use of a biocompatible local drug delivery system using low molecular mass gelators is preferred as a potential approach to reduce its side effects. Low molecular weight organic gelators (LMWOGs) have drawn a lot of attention due to their numerous and varied applications in multiple fields. But nowadays its quite a challenging task to synthesize new types of LMWOGs that can fill the significant gap towards potential applications. In this work, we have explored a multicomponent pathway for the synthesis of a small repertoire of peptoids from simple building blocks by a one-pot Ugi reaction. A variety of novel effective low molecular weight organic gelators have been synthesized, leading to the formation of stable self-assembled aggregates in various solvents such as DMSO, aqueous DMSO, and methanol. Consequently, these aggregates give rise to the creation of organogels and organo/hydrogels. The gels have a minimum gelation concentration (MGC) of 1-2% w/v with high thermal stability. Furthermore, successful encapsulation and release of metronidazole (MZ) were achieved within the gel matrix under physiological pH conditions at 37 °C, ensuring the preservation of its structural and functional properties. The results demonstrated that the release rate of MZ from the organo/hydrogels is contingent on pH, exhibiting a gradual and regulated release in mild alkaline environments. Moreover, the devised system displayed noteworthy antimicrobial efficacy against E. coli, underscoring the potential of these novel low molecular weight organic gels (LMWOGs) as effective drug delivery systems in the pharmaceutical industry. The gel formulations exhibit biocompatibility and negligible cytotoxicity, as evidenced by cell viability studies conducted using the MTT assay.

Zn(II)-Coordination Complex(s) from Chiral Bisamides of L-Phenylalanine: Nanoscale-Based Biological Applications and Metallogelation

Three 3-pyridyl-containing small organic bisamide molecules attached with innocent L-phenylalanine (PHE) side chain as building blocks and positional isomeric toluoyl terminals (PME, MME, and OME) have rationally been designed and synthesized for developing a new series of ZnII-coordination complexes. One of the unique molecular frameworks, having two hydrogen bond-equipped monodentate metal-coordinating sites and biologically potent chiral PHE moiety, was combined with ZnII halide salts under various conditions to produce the coordination complexes (CC1-CC7), thoroughly characterized by the single-crystal X-ray diffraction (SXRD) technique. Maintaining the similar component ratios of acquired CCs in 1:1 DMSO-water produced low-molecular weight metallogels (LMWGs) of PME/MME as envisaged from a rheology- and crystal engineering-based structural rationale. A structure-property correlation from the basis of PXRD of the bulk and xerogels and SXRD data of the isolated single crystals of reaction products clearly supports the crystal engineering-based design strategy based on which the metallogels are prepared. Hand-ground nanoscale ZnCl2-based coordination complex CC1 of PME was also studied for cytotoxicity (HEK-293 cell line) and anticancer activities (B16-F10 cell line) in the MTT assay.

Effect of Imposing Spatial Constraints on Low Molecular Weight Gels

We outline the effect of imposing spatial constraints during gelation on hydrogels formed by dipeptide-based low molecular weight gelators. The gels were formed via either a solvent switch or a change in pH and formed in different sized vessels to produce gels of different thickness while maintaining the same volume. The different methods of gelation led to gels with different underlying microstructure. Confocal microscopy was used to visualize the resulting microstructures, while the corresponding mechanical properties were probed via cavitation rheology. We show that solvent-switch-triggered gels are sensitive to imposed spatial constraints, in both altered microstructure and mechanical properties, while their pH-triggered equivalents are not. These results are significant because it is often necessary to form gels of different thicknesses for different analytical techniques. Also, gels of different thicknesses are utilized between various applications of these materials. Our data show that it is important to consider the spatial constraints imposed in these situations.

Supramolecular Arrangement and Rheological Properties of Bisamide Gels

We report a systematic study of the gelation behavior of nBA gelators in xylene, with odd and even n-methylene spacers between the amide groups (n = 5-10) and 17 carbons at each end. The melting temperatures (Tm0) of nBA gels are obtained from fitting our DSCN(T) model to the experimental DSC data. The found Tm0 of nBA gels is about 35 °C lower than Tm0 of the pure nBA gelators. This is reasonably well explained by a simple model combining theories of Flory-Huggins and Gibbs free energy of melting (FHM model). We attribute this depression to an increase in entropy upon melting of the gel due to mixing with the solvent. The odd-even alternation in Tm0 of nBA gels, which was also found for the nBA gelators, indicates that the solid structures inside the gels are somewhat similar. This was studied using XRD: similar 00l reflections were found in the XRD patterns of all nBA gels and their nBA gelators. For even nBA gels, the same reflections in the 19-25° (2θ) region confirm that the sheetlike supramolecular structure of the gels is analogous to the lamellar structure of the solid gelators. For odd nBA gels, a slight difference in the reflections around 20-25° (2θ) implies a somewhat different side-by-side packing of odd nBA gels compared to the solid state. This variation is found for all the odd gels, and indeed, they show distinctly different morphologies compared to the even nBA gels. The possible effect of this on the rheological properties is discussed using some inspiration from the Halpin-Tsai model for composites where nBA gels are considered to be analogous to composite materials. The change of the storage modulus (G') with the shape factor of woven fibers and sheets in nBA gels (20 wt %) indicates that a rheological odd-even effect might indeed be present.

An injectable supramolecular hydrogel as a self-drug-delivery system for local chemoimmunotherapy against melanoma

Skin-cancer melanoma caused 57k death in 2020. Some of the available therapies are: topical application of a gel loaded with an anti-skin cancer drug and intravenous injection of immune cytokines; however, both the approaches have drawbacks such as inefficient internalization of the drug in cancer cells and a short half-life with severe side effects, respectively. Interestingly, we observed for the first time that a subcutaneously implanted hydrogel designed and synthesized by coordinating NSAIDs and 5-AP with Zn(II) can effectively combat melanoma cell (B16-F10)-induced tumors in C57BL/6 mice. Both in vitro and in vivo results show that it can effectively reduce PGE2 expression, consequently upregulating IFN-γ and IL-12 that eventually engage M1-macrophages for activating T cells (CD8+), triggering apoptosis. This unique all-in-one self-drug-delivery approach, wherein the hydrogel implant is made from the drug molecules itself providing both chemotherapy and immunotherapy in combating deadly melanoma, highlights the supramolecular chemistry-based bottom-up approach in cancer therapy.

Self-assembled renewable nano-sized pentacyclic triterpenoid maslinic acids in aqueous medium for anti-leukemic, antibacterial and biocompatibility studies: An insight into targeted proteins-compound interactions based mechanistic pathway prediction through molecular docking

Maslinic acid is a naturally occurring dihydroxy, mono-carboxy bioactive triterpenoid. Its bulky structure was the main hindrance in the path of biological activity. Sodium and potassium salts of nano-sized triterpenoid maslinic acid were prepared from maslinic acid and its self-assembly property was studied in aqueous and aqueous-organic binary liquid mixtures. Morphology of the compounds studied by Field Emission Scanning Electron Microscopy (FESEM), Atomic Force Microscopy (AFM), High Resolution Transmission Electron Microscopy (HRTEM), Optical Microscopy, Fourier Transform Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD) revealed vesicular morphology of the self-assemblies. Selective cytotoxicity was performed in leukemic (K-562 and KG-1a) and PBMC cells. Among the three self-assemblies (maslinic acid 1, sodium maslinate 2 and potassium maslinate 3), sodium maslinate 2 showed better antileukemic efficacy. Sodium maslinate 2 induced apoptosis in leukemic cells by elevating ROS levels and disrupting the cellular antioxidant system. From the in-silico studies, it was confirmed that 2 interacted with extrinsic and intrinsic apoptotic proteins of leukemic cells and killed those cells by inducing apoptotic pathways. The compounds 1, 2 and 3 showed significant antibacterial efficacy against E.coli strain through binding with several periplasmic membrane fusion protein (MFP) and limiting the efflux system leading to arrestation of antimicrobial resistance.

The Role of Functional Groups in Tuning the Self-Assembly Modes and Physical Properties of Multicomponent Gels

We have analyzed the nature and role of functional groups on the self-assembly modes and the physical properties of multicomponent gels with structurally similar individual components. The gelation properties of individual and mixed enantiomeric compounds of biphenyl bis-(amides) of alanine (BPA) or phenylalanine (BPP) methyl ester were analyzed in various solvent/solvent mixtures. Multicomponent gels were formed by mixing the enantiomeric BPP compounds at a lower concentration, but a higher concentration was required for mixed alanine-based BPA gels. The comparison of the mechanical strength of the individual and mixed BPP compounds indicated that the mixed BPP gels displayed enhanced mechanical strength (∼2-fold increase) in p-xylene, but a weaker gel was observed in DMSO/water. However, a reverse trend was observed for BPA gels, indicating the role of functional groups in the gel network formation. X-ray diffraction analysis of the gelator and the xerogels in the solid state confirmed the formation of co-assembled networks in mixed enantiomeric gels. The stability of the gels towards anions was evaluated by analyzing the anion induced stimuli-responsive properties. These results indicate the effective modeling of the functional groups of the individual components could lead to multicomponent gels with tunable properties.

Phenylalanine conjugated supramolecular hydrogels developed from the mafenide and flurbiprofen multidrug for biological applications

A well-known nonsteroidal anti-inflammatory drug (NSAID), flurbiprofen (FLR), was first conjugated individually with two naturally occurring amino acids such as L-phenylalanine (PHE) and L-alanine (ALA). These covalent amidic bioconjugates were further reacted individually with mafenide (a drug for treating burn wounds) and amantadine (an antiviral drug) to develop primary ammonium monocarboxylate (PAM) salts. Interestingly, both the PHE-containing multidrug salts exhibited significant gelation ability with various solvents including biologically potent water or methyl salicylate (MS). The isolated hydrogel (HG) as well as all the organogels obtained from multidrug gelators were extensively characterized by dynamic rheology and rheoreversibility studies. The hydrogel of FLR·PHE·MAF and MS gels of FLR·PHE·AMN/FLR·AMN were also selectively characterized by table-top and FEG-TEM analyses. The temperature-dependent ¹H-NMR spectroscopy of the selected HG further provided insights into the gelation mechanism and the only isolated single-crystal of the weakly diffracted gelator FLR·AMN also revealed the presence of 1D hydrogen-bonded networks. The pure hydrogelator FLR·PHE·MAF salt (which is also an ambidextrous gelator) was found to be promising in both mechanical (rheoreversible) and biological applications and was found to be effective in cytotoxicity, biocompatibility, anti-cancer activity (MTT and cell migration assay), antibacterial response (zone inhibition, turbidity, INT, and resazurin assay) and haemolysis studies.

Mechanistic insight into gel formation of co-amorphous resveratrol and piperine during dissolution process

Different from previous co-amorphous systems, co-amorphous resveratrol and piperine (namely RES-PIP CM) showed much lower dissolution in comparison to the original two crystalline drugs owing to its gel formation during dissolution. The purpose of this study is to investigate the mechanism of gel formation and seek strategies to eliminate such gelation. It was found that the dissolution performance of RES-PIP CM and the properties of formed gels were significantly affected by the medium temperature and stoichiometric ratio of components. Multiple characterization results confirmed that the gelation process underwent the decrease of T_g caused by water plasticization, and then entered into its supercooled liquid state with high viscosity, accompanied by self-assembly of molecules. Furthermore, the study answered the question that whether such gelation of RES-PIP CM could be eliminated by porous carrier materials. The materials, mesoporous silica (MES) and attapulgite (ATT), provided barrier and well separation between molecules and particles of RES-PIP CM by the pore steric hindrance, and impeded the self-assembly and aggregation, hence achieving the degelation and dissolution improvement. The present study highlights the importance of recognizing gelation potential of some co-amorphous formulations, and provides an effective strategy to eliminate gelation in developing high quality co-amorphous drug products.

Rheological studies of cellulose nanocrystal/dimethyl sulfoxide organogels

Cellulose nanocrystals (CNCs)/H₂O gels have received significant interest in various applications for the past decades. And yet CNCs organogels, which are important to their wider application, are less explored. In this work, CNCs/Dimethyl sulfoxide (DMSO) organogels are carefully investigated by rheological methods. It is found that metal ions also can facilitate the organogel formation as in hydrogel. Charge screening and coordination effects play vital roles in the organogel formation and their mechanical strength. CNCs/DMSO gels with different cations display similar mechanical strength, while CNCs/H₂O gels show increasing mechanical strength with the increasing valence of cations. It seems that the coordination between cations and DMSO alleviate the influence of valence on gel mechanical strength. Due to weak, fast and reversible electrostatic interactions among CNCs particles, both CNCs/DMSO and CNCs/H₂O gels show instant thixotropic behavior, which may find some interesting applications in the field of drug delivery. The morphological changes observed in polarized optical microscope appear to be consistent with rheological results.

Stimuli-Responsive Properties of Supramolecular Gels Based on Pyridyl-N-oxide Amides

The nature of functional groups and their relative position and orientation play an important role in tuning the gelation properties of stimuli-responsive supramolecular gels. In this work, we synthesized and characterized mono-/bis-pyridyl-N-oxide compounds of N-(4-pyridyl)nicotinamide (L₁-L₃). The gelation properties of these N-oxide compounds were compared with the reported isomeric counterpart mono-/bis-pyridyl-N-oxide compounds of N-(4-pyridyl)isonicotinamide. Hydrogels obtained with L₁ and L₃ were thermally and mechanically more stable than the corresponding isomeric counterparts. The surface morphology of the xerogels of di-N-oxides (L₃ and diNO) obtained from the water was studied using scanning electron microscopy (SEM), which revealed that the relative position of N-oxide moieties did not have a prominent effect on the gel morphology. The solid-state structural analysis was performed using single-crystal X-ray diffraction to understand the key mechanism in gel formation. The versatile nature of N-oxide moieties makes these gels highly responsive toward an external stimulus, and the stimuli-responsive behavior of the gels in water and aqueous mixtures was studied in the presence of various salts. We studied the effect of various salts on the gelation behavior of the hydrogels, and the results indicated that the salts could induce gelation in L₁ and L₃ below the minimum gelator concentration of the gelators. The mechanical properties were evaluated by rheological experiments, indicating that the modified compounds displayed enhanced gel strength in most cases. Interestingly, cadmium chloride formed supergelator at a very low concentration (0.7 wt% of L₃), and robust hydrogels were obtained at higher concentrations of L₃. These results show that the relative position of N-oxide moieties is crucial for the effective interaction of the gelator with salts/ions resulting in LMWGs with tunable properties.

Novel supramolecular organo-oil gelators for fast and effective oil trapping: Mechanism and applications

In this paper, for the sorption of oil from oil polluted soil/water systems, nine new supramolecular organo-oil gelators were synthesized using three distinct diisocyanates and alcohols. The manufactured gelators were characterized using various techniques. The Fourier transform infrared (FTIR) and mass spectra confirmed the successful formation of the oil gelators. The synthesis of the proposed gelators was confirmed by the ¹H NMR, which exhibited three singlets that were attributed to an aliphatic side chain containing 29 protons. The scanning electron microscopy (SEM) analysis exhibited porous, sheets, prisms, and fibrous structures for the supramolecular oil gelators. The oil uptake data analysis was subjected to the Langmuir and Freundlich isotherm models which showed the R² value of 0.99 and a maximum adsorption capacity (q_max) of 45 mLg^-1. From the mechanistic point of view, it was proposed that the organo-oil gel initially leads to self-assembly and further entanglements forming the fibers, which finally make a trap for the oil molecules. Among all the nine gelators and different combinations used, the combination of ditetradecyl (TDI 14: DMI14: HMI 14) gelators in the ratio of 1:2:1 exhibited maximum oil uptake of ∼58% initially which further boosted to ∼99% using gasoline as the co-congealed solvent. Interestingly, the complete gelation of the oil from the oil-water mixture was achieved within 30 min of application with high oil recovery. The presented study confirmed that the oil removal by organo-oil gelator is a simple, novel, and facile technique, which could be employed for treating oil-contaminated soil/water mixture.

Molecular and Aggregate Structural, Thermal, Mechanical and Photophysical Properties of Long-Chain Amide Gelators Containing an α-Diketo Group in the Presence or Absence of a Tertiary Amine Group

Three structurally related gelators, each containing octadecyl chains, an α-diketo group at the 9,10 positions, and each with a different N-amide group-isobutyl (DIBA), isopentyl (DIPA) or N-(2-(dimethylamino)ethyl) (DMEA)-have been synthesized. Their neat structures as well as the thermal mechanical, and photophysical properties in their gel states with various liquids have been investigated. The gelator networks of DIBA and DIPA in octane, hexylbenzene and silicone oil consist of bundles of fibers. These gels are partially thixotropic and mechanically, thermally (to above their melting or silicone oil gelation temperatures), and photophysically stable. They are mechanically and thermally stronger than the gels formed with DMEA, the gelator with a tertiary amine group. The lone pair of electrons of the tertiary amine group leads to an intra-molecular or inter-molecular charge-transfer interaction, depending on whether the sample is a solution, sol, or gel. Neat, solid DMEA does not undergo the charge-transfer process because its amino and diketo groups are separated spatially by a large distance in the crystalline state and cannot diffuse into proximity. However, the solution of DIPA upon the addition of triethylamine becomes unstable over time at room temperature in the dark or (more rapidly) when irradiated, which initiates the aforementioned charge-transfer processes. The eventual reaction of the gelators in the presence of a tertiary amine group is ascribed to electron transfer from the lone-pair on nitrogen to an α-diketo group, followed by proton transfer to an oxygen atom on the anion radical of the α-diketo group from a methyl or methylene group attached to the nitrogen atom of the cation radical. Finally, the formation of an α-diketyl radical leads to irreversible electronic and structural changes that are observed over time.

The Effect of Branched Alkyl Chain Length on the Properties of Supramolecular Organogels from Mono-N-Alkylated Primary Oxalamides

Mono-N-alkylated primary oxalamide derivatives with different sized branched alkyl tail-groups were excellent low molecular weight gelators for a variety of different organic solvents with different polarities and hydrogen-bonding abilities. Solvent-gelator interactions were analyzed using Hansen solubility parameters, while ¹H NMR and FTIR spectroscopy were used to probe the driving forces for the supramolecular gelation. The molecular structures of the twin tail-groups did not significantly affect the supramolecular gelation behavior in different solvents. However, for select solvents, the molecular structures of the tail-groups did have a significant effect on gel properties such as the critical gelator concentration, thermal stability, gel stiffness, gel strength, network morphology, and molecular packing. Finally, metabolic activity studies showed that the primary alkyl oxalamide gelators had no effect on the metabolic activity of mouse immune cells, which suggests that the compounds are not cytotoxic and are suitable for use in biomedical applications.

Adjusting the water-sensitivity of sugar/boronate-based organogels

During the investigation of the water-sensitivity of (arylboronate alkylglucoside)-based organogels, we evaluated a series of twelve potential organogelators. They were synthesised in a single step from the corresponding arylboronic acids and alkylglucosides. Eight of them showed organogelation abilities in three solvents (toluene, cyclohexane, and ethyl myristate). Conformational minimisations of the potential organogelators permitted a clear relationship between the arylboronate orientation and the gelation effectiveness to be established. These gels were characterised by rheometry and SEM which revealed a gel-state originating from the self-assembly of the organogelators into long entangled fibres. SAXS confirmed the mode of packing in a hexagonal phase. Gels in toluene were found to be water-sensitive both after addition of a small amount of water and immersion into water. This study demonstrated that the main parameter impacting the water-sensitivity was the length of the alkyl chain at the anomeric position of the glucoside unit, much more than the functionalisation of an arylboronate moiety.

Recent advances on small molecular gels: formation mechanism and their application in pharmaceutical fields

INTRODUCTION

As an essential complement to chemically cross-linked macromolecular gels, drug delivery systems based on small molecular gels formed under the driving forces of non-covalent interactions are attracting considerable research interest due to their potential advantages of high structural functionality, lower biological toxicity, reversible stimulus-response, and so on.

AREA COVERED

The present review summarizes recent advances in small molecular gels and provides their updates as a comprehensive overview in terms of gelation mechanism, gel properties, and physicochemical characterizations. In particular, this manuscript reviews the effects of drug-based small molecular gels on the drug development and their potential applications in the pharmaceutical fields.

EXPERT OPINION

Small molecular-based gel systems, constructed by inactive compounds or active pharmaceutical ingredients, have been extensively studied as carriers for drug delivery in pharmaceutical field, such as oral formulations, injectable formulations, and transdermal formulations. However, the construction of such gel systems yet faces several challenges such as rational and efficient design of functional gelators and the great occasionality of drug-based gel formation. Thus, a deeper understanding of the gelation mechanism and its relationship with gel properties will be conducive to the construction of small molecular gels systems and their future application.

Adipic acid directed self-healable supramolecular metallogels of Co(II) and Ni(II): intriguing scaffolds for comparative optical-phenomenon in terms of third-order optical non-linearity

Two brilliant outcomes of supramolecular self-assembly directed, low molecular weight organic gelator based self-healable Co(II) and Ni(II) metallogels were achieved. Adipic acid as the low molecular weight organic gelator and dimethylformamide (DMF) solvent are employed for the metallogelation process. Rheological analyses of both gel-scaffolds reveal mechanical toughness as well as visco-elasticity. Thixotropic behaviours of both the gels were scrutinized. Morphological variations due to the presence of two different metal ions with diverse metal-ligand coordinating interactions were established. The mechanistic pathways for forming stable metallogels of Co(II)-adipic acid (Co-AA) and Ni(II)-adipic acid (Ni-AA) were judiciously developed through infrared absorption spectral analysis. The nonlinear optical properties, such as the third-order process, of these synthesized metallogels were scrutinized by means of the Z-scan method at a beam excitation wavelength of 750 nm by a femtosecond laser with different excitation intensities ranging from 64 to 140 GW cm^-2. The third-order nonlinear optical susceptibility (χ⁽³⁾) of the order of 10^-14 esu was obtained from the measured Z-scan data. Both the metallogels exhibit positive nonlinear refraction and reverse saturable (RSA) absorption at high-intensity excitation. Co(II) and Ni(II) metallogels show nonlinear refractive indices (n₂^I) of (3.619 ± 0.146) × 10^-6 cm² GW^-1 and (3.472 ± 0.102) × 10^-6 cm² GW^-1, respectively, and two photon absorption coefficients (β) of (1.503 ± 0.045) × 10^-1 cm GW^-1 and (1.381 ± 0.029) × 10^-1 cm GW^-1 at an excitation intensity of 140 GW cm^-2. We also studied the optical limiting properties with a limiting threshold of 9.57 mJ cm^-2. Therefore, both metallogels can be considered promising materials for photonic devices: for instance, for optical switching and optical limiting.

A gel lattice alters the phase state of a solvent

Some low-molecular-weight substances are able to self-assemble into fiber-like structures (strings) to form gels. One of the examples of such substances is trifluoroacetylated alpha-aminoalcohols (TFAAAs) able to gelate in many organic solvents. Here we report the formation and describe the properties of a layer of an altered solvent covering the strings' surface. The altered solvent layer has a different refractive index and melts at a temperature about several degrees lower than that of the bulk solvent. Moreover, the bulk solvent's melting temperature was also decreased by values far beyond the one expected according to Raoult's law. Based on the Gibbs-Thomson equation it is possible to derive the thickness of the special layer as well as the average gel lattice parameters, which were very stable across the variety of systems investigated.

Self-Assembling Oligo(2-oxazoline) Organogelators for the Encapsulation and Slow Release of Bioactive Volatiles

Herein, we report a class of distinctive supramolecular nanostructures in situ-generated from the cationic ring-opening polymerization of a particular 2-oxazoline monomer, i.e., 2-(N-tert-butyloxycarbonylaminomethyl)-2-oxazoline (Ox1). Driven by side-chain hydrogen bonding between neighboring molecules and van der Waals interactions, the growing oligomers of Ox1 precipitate in the form of macroscopic platelets when the degree of polymerization reaches 5-7. A similar self-assembly occurred in the block copolymerization of 2-ethyl-2-oxazoline (EtOx) or 2-pentyl-2-oxazoline (PeOx) and Ox1 as the second monomer. These polymeric aggregates were found to disassemble into rod-like nanoparticles under appropriate conditions, and to form stable organogels in some polar solvents like dimethylformamide as well as in natural liquid fragrances such as (R)-carvone, citronellal, and (R)-limonene. Scanning electron microscopy revealed that the morphology of their xerogels was solvent-dependent, mainly with a lamellar or fibrous structure. The rheology measurements confirmed the as-obtained organogels feature an obvious thixotropic character. The storage modulus was about 7-10 times higher than the loss modulus, indicating the physical crosslinking in the gel. The fragrance release profiles showed that the presented supramolecular gel system exhibits good sustained-release effect for the loaded bioactive volatiles.

Molecular Design, Supramolecular Assembly, and Excellent Dye Adsorption Capacity of Natural Rigid Dehydroabietic Acid-Tailored Amide Organogelators

It is very appealing to synthesize functional soft materials from natural and abundant plant diterpenes because they have conformationally rigid and chiral properties. Herein, dehydroabietic-based monoamide (DA-1) and diamide (DA-2) were designed by introducing device interactions, π-π stacking and hydrogen bonding, with an aromatic group, C═O, and N-H. DA-1 and DA-2 can be gelled in a mixed solvent and a single solvent, respectively. Several novel supramolecular organic gels including highly entangled three-dimensional networks composed of rods or fibers were constructed. Interestingly, DA-2 forms a helical structure that is right-handed under the cooperative control of the solvent and the rigid structure of rosin. Gel formation was primarily driven by hydrogen bonding, π-π stacking, and van der Waals force. Combined with Gaussian calculation and X-ray diffraction (XRD), we established pack patterns for each system, revealing the roles played by rosin and amide groups. Moreover, the carbon tetrachloride gel of DA-2 can effectively remove Congo red in an aqueous solution, and the removal rate can reach 98.4%. This research explores an efficient organic gel for adsorbing Congo red dye with the secretions of pine trees.

Synthesis and Properties of a New Type of Terpyridine Cholesterol Derivative Gelator with Applications to Medical Treatments

Low molecular mass gelators (LMMGs), as a new type of intelligent soft material, possess good response properties to light, electricity, heat, and ultrasound and have many potential applications in fields such as intelligent sensing, biological materials, and drug release. Additionally, steroid derivatives have been a focus in the study of LMMGs for their desirable properties as well, such as their rigid framework, multichiral center, and strong van der Waals accumulation. Furthermore, the coordination ability of terpyridine has been an emphasis in the study of supramolecular chemistry and coordination chemistry as well. Attempts have been made with terpyridine groups that have special responses, such as terpyridine with steroid derivatives, to build more specialized and functional gelators. In this study, we used 2-acetylpyridine, 2-formaldehyde, and cholesterol to synthesize 6-(2,2:6 ${}^{\prime }$ ,2 ${}^{″}$ -terpyridine-4 ${}^{\prime }$ -carboxamide group) hexanoic acid (with a yield of 64.39%, P1), glycine cholesterol ester (with a yield of 70.36%, P2), and DMTCP (with a yield of 88.92%). Infrared spectroscopy, nuclear magnetic resonance spectroscopy, mass spectrometry, elemental analysis, and gelator performance tests were then conducted to measure the gelation effect of the materials and to explore their gelation mechanisms. Compared to P1 and P2, the DMTCP synthesized by P1 and P2 was able to form gel in more kinds of solvents. In addition, when it contains both terpyridine and cholesterol functional groups, the gelation properties of DMTCP were also significantly improved, and all the gels prepared in the four solvents in which DMTCP can form gels were stimulus responsive.

Multiple Stimuli-Responsive Supramolecular Gel Formed from Modified Adenosine

Urea derivatives 1 and 2, synthesized from adenosine, were designed as low-molecular-weight gelators. Hydrophobic groups have been introduced into all or part of the hydroxy groups of the hydrophilic ribose moiety of 1 and 2 to control the solvophilicity of the molecules and their aggregates. Compound 2 selectively formed supramolecular gels in halogenated solvents such as chloroform and 1,2-dichloroethane. The supramolecular gel of 2 and chloroform was thermally stable and its gel-to-sol phase transition temperature was higher than the boiling point of chloroform. The physical properties of the supramolecular gel were investigated by determining its viscoelastic properties using a rheometer. The supramolecular gel realized multiple stimuli-responsive reversible gel-sol phase transitions. The supramolecular gel showed reversible phase transition by repeated warming-cooling cycles accompanying with the gel-sol transitions. The supramolecular gel could undergo five repeated mechano-responsive gel-sol transitions. Gel-to-sol phase transition could also be achieved by adding various anions to the supramolecular gel, such as tetrabutylammonium fluoride. Regelation was realized by adding boron trifluoride etherate to the fluoride ion containing sol. Addition of methanol to the supramolecular gel also induced gel-to-sol phase transition. Regelation was realized by adding molecular sieves 4 Å to the suspension.

Water-in-Oil Emulsion Gels Stabilized by a Low-Molecular Weight Organogelator Derived from Dehydroabietic Acid

High concentrations of surfactants or gelators are usually necessary to prepare emulsions gels with unusual physicochemical properties. This situation may be improved by innovating the aggregate morphology in systems. Herein, a rosin-based molecule is designed and synthesized using dehydroabietic acid as the starting material (denoted as R-Lys-R). The molecule acts as an effective organogelator and can gelate several hydrocarbon compounds with a minimum gelation concentration of 0.2% (w/v). Analysis using atomic force microscopy (AFM) and circular dichroism (CD) reveals that in n-decane, R-Lys-R forms left-handed helical fibers with a cross-sectional diameter of approximately 15 nm. The directional hydrogen bonding of the amide group is helpful to the formation of aggregates. At concentrations of R-Lys-R above 2%, water-in-oil emulsions are transformed into emulsion gels owing to the aptitude of R-Lys-R in gelating the oil phase. The concentrations of the emulsifier can be adjusted to obtain emulsion gels with different formulations. This work reveals the potential of rosin derivatives for the formation of small molecular weight organogels and provides a novel method for the utilization of natural resources in soft materials and home care products.

Formation of Salts and Molecular Ionic Cocrystals of Fluoroquinolones and α,ω-Dicarboxylic Acids

The cocrystallization of the fluoroquinolones ciprofloxacin (cip), norfloxacin (nor), and enrofloxacin (enro) with the α,ω-dicarboxylic acids glutaric acid (glu), adipic acid (adi), pimelic acid (pim), suberic acid (sub), azeliac acid (az), and sebacic acid (seb) resulted in 27 new molecular salts and ternary molecular ionic cocrystals of compositions A⁺B^-, A₂ ⁺B^2-, A₂ ⁺B^2-B, and A⁺B^-A. Depending on the solvent, different stoichiomorphs, solvates, or polymorphs were obtained. All salts and cocrystals contain the robust R₂NH₂ ^+...-OOC or R₃NH^+...-OOC synthon but have different supramolecular ring motifs. Moderate solubility enhancements over the parent fluoroquinolones were observed. Salts in the ratio of 1:1 and 2:1 were also prepared by ball-milling. The milled sample nor/az (1:1) was shown to gel the GRAS (generally recognized as safe) solvent propylene glycol, and enro/sub (1:1) was shown to gel both propylene glycol and water. Dynamic rheology measurements confirmed that nor/az and enro/sub behave like viscoelastic materials and supramolecular gels.

Molecular Self-Assembly as a Trigger of Life Origin and Development

The origin and reason for the homochirality of living cells go with the problem of a relatively narrow spectrum of the actual biological monomers compared to the whole theoretically possible spectrum of amino acids or carbohydrates. A limited number of bio-monomers implies some special feature differing from all other similar molecules that are not present in the living cell. Here we propose one of the candidates for such a peculiarity: the ability to form highly elongated helical supramolecular structures (strings) when precipitating from homochiral solutions. The strings' forming can be accompanied by spontaneous splitting and/or chiral purification of the initially racemic mixture. Our previous theoretical reasoning was based mainly on the biomimetic systems, while now we describe the strings forming in homochiral amino acid solutions.

Photo-modulation of supramolecular polymorphism in the self-assembly of a scissor-shaped azobenzene dyad into nanotoroids and fibers

Recent advances in the research field of supramolecularly engineered dye aggregates have enabled the design of simple one-dimensional stacks such as fibers and of closed structures such as nanotoroids (nanorings). More complex and advanced supramolecular systems could potentially be designed using a molecule that is able to provide either of these distinct nanostructures under different conditions. In this study, we introduced bulky but strongly aggregating cholesterol units to a scissor-shaped azobenzene dyad framework, which affords either nanotoroids, nanotubes, or 1D fibers, depending on the substituents. This new dyad with two trans-azobenzene arms shows supramolecular polymorphism in its temperature-controlled self-assembly, leading to not only oligomeric nanotoroids as kinetic products, but also to one-dimensional fibers as thermodynamic products. This supramolecular polymorphism can also be achieved via photo-triggered self-assembly, i.e., irradiation of a monomeric solution of the dyad with two cis-azobenzene arms using strong visible light leads to the preferential formation of nanotoroids, whereas irradiation with weak visible light leads to the predominant formation of 1D fibers. This is the first example of a successful light-induced modulation of supramolecular polymorphism to produce distinctly nanostructured aggregates under isothermal conditions.

Supramolecular Hydrogels Developed from Mafenide and Indomethacin as a Plausible Multidrug Self-Delivery System as Antibacterial and Anti-inflammatory Topical Gels

Following a structural rationale, a series of simple organic salts derived from mafenide (a drug for treating burn wounds) and n-alkyl carboxylic acids (Me-(CH₂)_n-COOH; n = 1-3, 10-15) and various nonsteroidal anti-inflammatory drugs (NSAIDs), namely, indomethacin (IND), diclofenac (DIC), meclofenamic acid (MEC), tolfenamic acid (TOL), and flufenamic acid (FLU) (designated as salts 1-14, respectively) were synthesized as potential hydrogelators. Gelation studies revealed that mafenide n-alkyl carboxylates with n = 11-14, i.e., salts 5-8, and the indomethacin salt of mafenide, i.e., salt 10, were hydrogelators. The corresponding hydrogels, namely, 5(HG)-8(HG) and 10(HG), were characterized by table-top and dynamic rheology and high-resolution transmission electron microscopy (HR-TEM). Single-crystal structures of the nongelator salts 1-3 and the gelator salt 10 were determined by X-ray diffraction. The results obtained from various studies, which included the solubility, biostability, biocompatibility (MTT assay), and anti-inflammatory (PGE₂ assay) response of salt 10, the antibacterial response (zone inhibition assay) of salt 10, its components, and 10(HG), and the release of salt 10 in vitro from the corresponding hydrogel bed to the bulk solvent at 37 °C in 24 h, suggested their plausible use in developing multidrug-derived topical hydrogels for self-delivery applications.

Mechanistic insight into gel-induced aggregation of amorphous curcumin during dissolution process

Amorphous curcumin (CUR) exhibited a decreased dissolution rate in comparison with the crystalline counterpart due to its gel formation during dissolution. The main purpose of the present study is to explore the mechanism of such gelation phenomenon. It was found that the dissolution of amorphous CUR and gel properties were influenced by the temperature and pH of the media. The formed gels were characterized by TPA, SEM, DSC, XRPD, FTIR and PLM. The results indicated that the gelation process led to the formation of a porous structure in which water molecules infiltrate, and entered into its supercooled liquid state with high viscosity when contacting aqueous media, accompanied by decreased T_g and crystalline transformation. In addition, mixing with hydrophilic excipients (such as hydrophilic silica) accelerated the gel formation of amorphous CUR, while the addition of hydrophobic excipients (such as hydrophobic silica and magnesium stearate) could effectively weaken and even eliminate the gelation, hence significantly improving its dissolution. Furthermore, according to contact angle measurement and fluorescence microscope observation, hydrophilic excipients were found to be able to accelerate water entering into the interior of amorphous CUR, hence facilitating the gelation, while hydrophobic excipients would hinder water infiltration into the powder and thus achieve degelation. In conclusion, it is important to recognize that the gelation potential of some amorphous materials should be considered in developing robust amorphous drug product of high quality and performance.

Quinoline-cored Poly(Aryl Ether) Dendritic Organogels with Multiple Stimuli-Responsive and Adsorptive Properties

Functional supramolecular gel materials have potential applications in sensors, optical switches, artificial antennae, drug delivery and so on. In this paper, quinoline-cored poly(aryl ether) dendritic organogelators were designed, synthesized and fully characterized. The gelation behaviour of the dendritic organogelator was tested in organic solvents, mixed solvents and ionic liquids. The dendron Q-G1 was found to be an efficient and versatile organogelator toward various apolar and polar organic solvents with the critical gelation concentrations (CGCs) approaching 1.2×10^-2  mol/L, indicating one dendritic organogelator could immobilize 1.2×10³ solvent molecules in the organogel network. Interestingly, these dendrons exhibited excellent gel formation in ionic liquids. Notably, these dendritic organogels were found to display multiple stimuli-responsive properties toward external stimuli including heat, ultrasound and shear stress, with a reversible sol-gel phase transition. In addition, the dendritic organogel could effectively adsorb heavy metals and organic dyes. The removal rate of Pb²⁺ was up to 20% and the adsorption rate for Rhodamine B was as high as 89%.

Making and Breaking of Gels: Stimuli-Responsive Properties of Bis(Pyridyl-N-oxide Urea) Gelators

The structural modification of existing supramolecular architecture is an efficient strategy to design and synthesize supramolecular gels with tunable and predictable properties. In this work, we have modified bis(pyridyl urea) compounds with different linkers, namely hexylene and butylene, to their corresponding bis(pyridyl-N-oxide urea). The gelation properties of both the parent and the modified compounds were studied, and the results indicated that modification of the 3-pyridyl moieties to the corresponding 3-pyridyl-N-oxides induced hydrogelation. The stability of the parent and modified compounds were evaluated by sol-gel transition temperature (T_gel) and rheological measurements, and single-crystal X-ray diffraction was used to analyze the solid-state interactions of the gelators. The morphologies of the dried gels were analyzed by scanning electron microscopy (SEM), which revealed that the structural modification did not induce any prominent effect on the gel morphology. The stimuli-responsive behavior of these gels in the presence of salts in DMSO/water was evaluated by rheological experiments, which indicated that the modified compounds displayed enhanced gel strength in most cases. However, the gel network collapsed in the presence of the chloride salts of aluminum(III), zinc(II), copper(II), and cadmium(II). The mechanical strength of the parent gels decreased in the presence of salts, indicating that the structural modification resulted in robust gels in most cases. The modified compounds formed gels below minimum gel concentration in the presence of various salts, indicating salt-induced gelation. These results show the making and breaking ability of the gel network in the presence of external stimuli (salts), which explains the potential of using LMWGs based on N-oxide moieties as stimuli-responsive materials.

Self-assembly of the monohydroxy triterpenoid lupeol yielding nano-fibers, sheets and gel: environmental and drug delivery applications

Lupeol is a medicinally important naturally abundant triterpenoid having a 6-6-6-6-5 fused pentacyclic backbone and one polar secondary "-OH" group at the C3 position of the "A" ring. It was extracted from the dried outer bark of Bombax ceiba and its self-assembly properties were investigated in different neat organic as well as aquous-organic binary liquid mixtures. The triterpenoid having only one polar "-OH" group and a rigid lipophilic backbone self-assembled in neat organic non-polar liquids like n-hexane, n-heptane, n-octane and polar liquids like DMSO, DMF, DMSO-H2O, DMF-H2O, and EtOH-H2O yielding supramolecular gels via formation of nano to micrometre long self-assembled fibrillar networks (SAFINs). Morphological investigation of the self-assemblies was carried out by field emission scanning electron microscopy, high resolution transmission electron microscopy, atomic force microscopy, optical microscopy, concentration dependent FTIR and wide angle X-ray diffraction studies. The mechanical properties of the gels were studied by concentration dependent rheological studies in different solvents. The gels were capable of removing toxic micro-pollutants like rhodamine-B and 5,6-carboxyfluorescein as well as the toxic heavy metal Cr(vi) from contaminated water. Moreover release of the chemotherapeutic drug doxorubicin from a drug loaded gel in PBS buffer at pH 7.2 has also been demonstrated by spectrophotometry.