Target-triggered polymerization for biosensing

Site-Directed Electrochemical Grafting for Amplified Detection of Antibody Pharmaceuticals

Antibody pharmaceuticals have become the most popular immunotherapeutic drugs and are often administered with low serum drug dosages. Hence, the development of a highly sensitive method for the quantitative assay of antibody levels is of great importance to individualized therapy. On the basis of the dual signal amplification by the glycan-initiated site-directed electrochemical grafting of polymer chains (glyGPC), we report herein a novel strategy for the amplified electrochemical detection of antibody pharmaceuticals. The target of interest was affinity captured by a DNA aptamer ligand, and then the glycans of antibody pharmaceuticals were decorated with the alkyl halide initiators (AHIs) via boronate cross-linking, followed by the electrochemical grafting of the ferrocenyl polymer chains from the glycans of antibody pharmaceuticals through the electrochemically controlled atom transfer radical polymerization (eATRP). As the glycans can be decorated with multiple AHIs and the grafted polymer chains are composed of tens to hundreds of electroactive tags, the glyGPC-based strategy permits the dually amplified electrochemical detection of antibody pharmaceuticals. In the presence of trastuzumab (Herceptin) as the target, the glyGPC-based strategy achieved a detection limit of 71.5 pg/mL. Moreover, the developed method is highly selective, and the results of the quantitative assay of trastuzumab levels in human serum are satisfactory. Owing to its uncomplicated operation and cost-effectiveness, the glyGPC-based strategy shows great promise in the amplified electrochemical detection of antibody pharmaceuticals.

On-site airborne pathogen detection for infection risk mitigation

Human-infecting pathogens that transmit through the air pose a significant threat to public health. As a prominent instance, the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that caused the COVID-19 pandemic has affected the world in an unprecedented manner over the past few years. Despite the dissipating pandemic gloom, the lessons we have learned in dealing with pathogen-laden aerosols should be thoroughly reviewed because the airborne transmission risk may have been grossly underestimated. From a bioanalytical chemistry perspective, on-site airborne pathogen detection can be an effective non-pharmaceutic intervention (NPI) strategy, with on-site airborne pathogen detection and early-stage infection risk evaluation reducing the spread of disease and enabling life-saving decisions to be made. In light of this, we summarize the recent advances in highly efficient pathogen-laden aerosol sampling approaches, bioanalytical sensing technologies, and the prospects for airborne pathogen exposure measurement and evidence-based transmission interventions. We also discuss open challenges facing general bioaerosols detection, such as handling complex aerosol samples, improving sensitivity for airborne pathogen quantification, and establishing a risk assessment system with high spatiotemporal resolution for mitigating airborne transmission risks. This review provides a multidisciplinary outlook for future opportunities to improve the on-site airborne pathogen detection techniques, thereby enhancing the preparedness for more on-site bioaerosols measurement scenarios, such as monitoring high-risk pathogens on airplanes, weaponized pathogen aerosols, influenza variants at the workplace, and pollutant correlated with sick building syndromes.

Dually Amplified Electrochemical Aptasensor for Endotoxin Detection via Target-Assisted Electrochemically Mediated ATRP

As the entering of bacterial endotoxin into blood can cause various life-threatening pathological conditions, the screening and detection of low-abundance endotoxin are of great importance to human health. Taking advantage of signal amplification by target-assisted electrochemically mediated atom transfer radical polymerization (teATRP), we illustrate herein a simple and cost-effective electrochemical aptasensor capable of detecting endotoxin with high sensitivity and selectivity. Specifically, the aptamer receptor was employed for the selective capture of endotoxin, of which the glycan chain was then decorated with ATRP initiators via covalent coupling between the diol sites and phenylboronic acid (PBA) group, followed by the recruitment of ferrocene signal reporters via the grafting of polymer chains through potentiostatic eATRP under ambient temperature. As the glycan chain of endotoxin can be decorated with hundreds of ATRP initiators while the further grafting of polymer chains through eATRP can recruit hundreds to thousands of signal reporters to each initiator-decorated site, the teATRP-based strategy allows for the dual amplification of the detection signal. This dually amplified electrochemical aptasensor has the ability to sensitively and selectively detect endotoxin at a concentration as low as 1.2 fg/mL, and its practical applicability has been further demonstrated using human serum samples. Owing to the simplicity, high efficiency, biocompatibility, and inexpensiveness of the teATRP-based amplification strategy, this electrochemical aptasensor holds great application potential in the sensitive and selective detection of low-abundance endotoxin and many other glycan chain-containing bio-targets.

Electrochemically Controlled Atom Transfer Radical Polymerization for Electrochemical Aptasensing of Tumor Biomarkers

Tumor biomarkers are of great value in the liquid biopsy of malignant tumors. In this work, a simple and cost-friendly electrochemical aptasensor was presented for the highly sensitive and selective detection of glycoprotein tumor biomarkers. The DNA aptamer-modified electrode was used as the sensing interface to specifically capture the target glycoprotein tumor biomarkers, to which the alkyl halide initiators for atom transfer radical polymerization (ATRP) were then attached via the esterification crosslinking between the boronic acid group and the cis-dihydroxyl sites of the conjugated oligosaccharide chains on glycoprotein tumor biomarkers followed by the growth of long-chain polymers through electrochemically controlled ATRP (eATRP) to efficiently recruit the ferrocene detection tags. As there are tens to hundreds of cis-dihydroxyl sites on a glycoprotein tumor biomarker for attaching ATRP initiators while each long-chain polymer can recruit hundreds to thousands of ferrocene detection tags, a significantly high current signal can be generated even in the presence of ultralow-abundance targets. Hence, the eATRP-based electrochemical aptasensor is capable of sensitively and selectively detecting glycoprotein tumor biomarkers. Using alpha-fetoprotein as the model target, the limit of detection was demonstrated to be 0.32 pg/mL. Moreover, the aptasensor has been successfully applied to detect glycoprotein tumor biomarkers in human serum samples. In view of its high sensitivity and selectivity, simple operation, and cost-friendliness, the eATRP-based electrochemical aptasensor shows great promise in the glycoprotein-based liquid biopsy of malignant tumors, even at the early stage of development.

Electrochemical Detection of Femtomolar DNA via Boronate Affinity-Mediated Decoration of Polysaccharides with Electroactive Tags

In view of their high efficiency and cost-effectiveness, polymers are of great promise as carriers for signal tags in amplified detection. Herein, we present a polysaccharide-amplified method for the electrochemical detection of a BRCA1 breast cancer gene-derived DNA target at the femtomolar levels. Briefly, peptide nucleic acid (PNA) with a complementary sequence was tethered as the capture probe for the DNA target, to which carboxyl group-containing polysaccharides were then attached via facile phosphate-Zr(IV)-carboxylate crosslinking, followed by the decoration of polysaccharide chains with electroactive ferrocene (Fc) signal tags via affinity coupling between a cis-diol site and phenylboronic acid (PBA) group. As the polysaccharide chain contains hundreds of cis-diol sites, boronate affinity can enable the site-specific decoration of each polysaccharide chain with hundreds of Fc signal tags, efficiently transducing each target capture event into the decoration of many Fc signal tags. As polysaccharides are cheap, renewable, ubiquitous, and biodegradable natural biopolymers, the use of polysaccharides for signal amplification offers the benefits of high efficiency, cost-effectiveness, excellent biocompatibility, and environmental friendliness. The linear range of the polysaccharide-amplified method for DNA detection was demonstrated to be from 10 fM to 10 nM (R² = 0.996), with the detection limit as low as 2.9 fM. The results show that this method can also discriminate single base mismatch with satisfactory selectivity and can be applied to DNA detection in serum samples. In view of these merits, the polysaccharide-amplified PNA-based electrochemical method holds great promise in DNA detection with satisfactory sensitivity and selectivity.

Fluorogenic monomer activation for protein-initiated atom transfer radical polymerization

Fluorogenic atom transfer radical polymerization (ATRP) directly detects initiator-dependent polymer formation, as initially non-fluorescent polycyclic aromatic probe monomers reveal visible fluorescence upon polymerization in real time. Advancement of this initial proof-of-concept toward biodetection applications requires both a more detailed mechanistic understanding of probe fluorescence activation, and the ability to initiate fluorogenic polymerization directly from a biomolecule surface. Here, we show that simple monomer hydrogenation, independent of polymerization, reveals probe fluorescence, supporting the critical role of covalent enone attachment in fluorogenic probe quenching and subsequent fluorescence activation. We next demonstrate bioorthogonal, protein-initiated fluorogenic ATRP by the surface conjugation and characterization of protein-initiator conjugates of a model protein, bovine serum albumin (BSA). Fluorogenic ATRP from initiator-modified protein allows for real-time visualization of polymer formation with negligible background fluorescence from unmodified BSA controls. We further probe the bioorthogonality of this fluorogenic ATRP assay by assessing polymer formation in a complex biological environment, spiked with fetal bovine serum. Taken together, we demonstrate the potential of aqueous fluorogenic ATRP as a robust, bioorthogonal method for biomolecular-initiated polymerization by real-time fluorescence activation.

Bioinspired Electro-RAFT Polymerization for Electrochemical Sensing of Nucleic Acids

Sensing of ultralow-abundance nucleic acids (NAs) is integral to medical diagnostics and pathogen screening. We present herein an electrochemical method for the highly selective and amplified sensing of NAs, using a peptide nucleic acid (PNA) recognition probe and a bioinspired electro-RAFT polymerization (BERP)-based amplification strategy. The presented method is based on the recognition of target NAs by end-tethered PNA probes, the labeling of thiocarbonylthio reversible addition-fragmentation chain transfer (RAFT) agents, and the BERP-assisted growth of ferrocenyl polymers. The dynamic growth of polymers is electrochemically regulated by the reduction of 1-methylnicotinamide (MNA) organic cations, the redox center of nicotinamide adenine dinucleotide (NAD⁺, coenzyme I). Specifically, electroreduction of the MNA cations causes the fragmentation of thiocarbonylthio RAFT agents into radical species, triggering the polymerization of ferrocenyl monomers, thereby recruiting plenty of ferrocene electroactive tags for amplified sensing. It is obvious that the BERP-based strategy is inexpensive and simple in operation. Benefiting from the high specificity of the PNA recognition probe and the amplified signal by the BERP-based strategy, this method is highly selective and the detection limit is as low as 0.58 fM (S/N = 3). Besides, it is applicable to the sensing of NAs in serum samples, thus showing great promise in the selective and amplified sensing of NAs.

Coenzyme-Mediated Electro-RAFT Polymerization for Amplified Electrochemical Interrogation of Trypsin Activity

Trypsin is a key proteolytic enzyme in the digestive system and its abnormal levels are indicative of some pancreatic diseases. Taking advantage of the coenzyme-mediated electrografting of ferrocenyl polymers as a novel strategy for signal amplification, herein, a signal-on cleavage-based electrochemical biosensor is reported for the highly selective interrogation of trypsin activity at ultralow levels. The construction of the trypsin biosensor involves (i) the immobilization of peptide substrates (without free carboxyl groups) via the N-terminus, (ii) the tryptic cleavage of peptide substrates, (iii) the site-specific labeling of the reversible addition-fragmentation chain transfer (RAFT) agents, and (iv) the grafting of ferrocenyl polymers through the electro-RAFT (eRAFT) polymerization, which is mediated by potentiostatic reduction of nicotinamide adenine dinucleotide (NAD⁺) coenzymes. Through the NAD⁺-mediated eRAFT (NAD⁺-eRAFT) polymerization of ferrocenylmethyl methacrylate (FcMMA), the presence of a few tryptic cleavage events can eventually result in the recruitment of a considerable amount of ferrocene redox tags. Obviously, the NAD⁺-eRAFT polymerization is low-cost and easy to operate as a highly efficient strategy for signal amplification. As expected, the as-constructed biosensor is highly selective and sensitive toward the signal-on interrogation of trypsin activity. Under optimal conditions, the detection limit can be as low as 18.2 μU/mL (∼72.8 pg/mL). The results also demonstrate that the as-constructed electrochemical trypsin biosensor is applicable to inhibitor screening and the interrogation of enzyme activity in the presence of complex sample matrices. Moreover, it is low-cost, less susceptible to false-positive results, and relatively easy to fabricate, thus holding great potential in diagnostic and therapeutic applications.

Functionalized graphene oxide in situ initiated ring-opening polymerization for highly sensitive sensing of cytokeratin-19 fragment

Improving the sensitivity of detection is crucial to monitor biomarker, assess toxicity, and track therapeutic agent. Herein, a sensitivity-improved immunosensor is reported for the first time via functionalized graphene oxide (GO) and a "grafting-to" ring-opening polymerization (ROP) dual signal amplification strategy. Through the ROP reaction using 2-[(4-ferrocenylbutoxy)methyl] oxirane (FcEpo) as the monomer, lots of electroactive tags are linked in situ from multiple initiation sites on the GO surface modified with ethanol amine (GO-ETA), thereby achieving high sensitivity even in the case of trace amounts of tumor markers. The utmost important factor for achieving this high sensitivity is to select functionalized GO as the initiator that contains a large number of repeated hydroxyl functional groups so as to trigger additional ROP reaction. Under the optimal conditions, the high sensitivity and applicability is demonstrated by the use of GO-ETA-mediated ROP-based immunosensor to detect non-small cell lung cancer (NSCLC)-specific biomarker down to 72.58 ag/mL (equivalent to ~6 molecules in a 5 μL sample). Furthermore, the satisfactory results for the determination of biomarkers in clinical serum samples highlighted that this immunosensor holds a huge potential in practical clinical application. This work described an electrochemical immunosensor for ultrasensitive detection of CYFRA 21-1 via the functionalized graphene oxide (GO) and a "grafting-to" ring-opening polymerization (ROP) dual signal amplification strategy, which hold the merits of high sensitivity, applicability, selectivity, efficiency, easy operation and environmental friendliness.

Electrochemically Controlled ATRP for Cleavage-Based Electrochemical Detection of the Prostate-Specific Antigen at Femtomolar Level Concentrations

As a single-chain glycoprotein with endopeptidase activity, the prostate-specific antigen (PSA) is valuable as an informative serum marker in diagnosing, staging, and prognosis of prostate cancer. In this report, an electrochemical biosensor based on the target-induced cleavage of a specific peptide substrate (PSA peptide) is designed for the highly selective detection of PSA at the femtomolar level, using electrochemically controlled atom transfer radical polymerization (eATRP) as a method for signal amplification. The PSA peptides, without free carboxyl sites, are attached to the gold surface via the N-terminal cysteine residue. The target-induced cleavage of PSA peptides results in the generation of carboxyl sites, to which the alkyl halide initiator α-bromophenylacetic acid (BPAA) is linked via the Zr(IV) linkers. Subsequently, the potentiostatic eATRP of ferrocenylmethyl methacrylate (FcMMA, as the monomer) leads to the surface-initiated grafting of high-density ferrocenyl polymers. As a result, a large amount of Fc redox tags can be recruited for signal amplification, through which the limit of detection (LOD) for PSA can be down to 3.2 fM. As the recognition element, the PSA peptide is easy to synthesize, chemically and thermally stable, and low-cost. Without the necessity of enzyme or nanoparticle labels, the eATRP-based amplification method is easy to operate and low-cost. Results also show that the cleavage-based electrochemical PSA biosensor is highly selective and applicable to PSA detection in complex biological samples. In view of these merits, the integration of the eATRP-based amplification method into cleavage-based recognition is believed to hold great promise for the electrochemical detection of PSA in clinical applications.

Electrochemical CYFRA21-1 DNA sensor with PCR-like sensitivity based on AgNPs and cascade polymerization

In this work, a new method of CYFRA21-1 DNA (tDNA) detection based on electrochemically mediated atom transfer radical polymerization (e-ATRP) and surface-initiated reversible addition-fragmentation chain transfer polymerization (SI-RAFT) cascade polymerization and AgNP deposition is proposed. Firstly, the peptide nucleic acid (PNA) probe is captured on a gold electrode by Au-S bonds for specific recognition of tDNA. After hybridization, PNA/DNA strands provide high-density phosphate groups for the subsequent ATRP initiator by the identified carboxylate-Zr⁴⁺-phosphate chemistry. Then, a large number of monomers are successfully grafted from the DNA through the e-ATRP reaction. After that, the chain transfer agent of SI-RAFT and methacrylic acid (MAA) are connected by recognized carboxylate-Zr⁴⁺-carboxylate chemistry. Subsequently, through SI-RAFT, the resulting polymer introduces numerous aldehyde groups, which could deposit many AgNPs on tDNA through silver mirror reaction, causing significant amplification of the electrochemical signal. Under optimal conditions, this designed method exhibits a low detection limit of 0.487 aM. Moreover, the method enables us to detect DNA at the level of PCR-like and shows high selectivity and strong anti-interference ability in the presence of serum. It suggests that this new sensing signal amplification technology exhibits excellent potential of application in the early diagnosis of non-small cell lung cancer (NSCLC). Graphical abstract Electrochemical detection principle for CYFRA21-1 DNA based on e-ATRP and SI-RAFT signal amplification technology.

Metal-Free Photoinduced Atom Transfer Radical Polymerization for Highly Sensitive Detection of Lung Cancer DNA

Convenient and sensitive detection of biomolecules is of great significance to disease diagnosis. In this work, a metal-free photoinduced atom transfer radical polymerization (photoATRP) by a reductive quenching pathway as a novel strategy is applied to achieve lung cancer DNA detection. Thiolated PNA is exploited to specifically recognize target DNA, and the initiator of photoATRP is linked to the electrode surface via phosphate-Zr⁴⁺ -carboxylate. Under the excitation of blue light, the reductive quenching pathway is activated with eosin Y (EY) as photoredox catalyst and N,N,N',N'',N'-pentamethyldiethylenetriamine (PMDETA) as electron donor, and numerous polymeric chains are formed. Under optimal conditions, the linear range of this strategy is from 0.1 pm to 10 nm (R² =0.989) with a limit of detection (LOD) of 1.4 fm (14 zmol in 10 μL). The variety of possible light sources for photoATRP and simple operation endow this biosensor with great potential for practical applications.

Radical polymerization reactions for amplified biodetection signals

This review summarizes various radical polymerization chemistries for amplifying biodetection signals and compares them from the practical point of view.

Controlled/“living” radical polymerization-based signal amplification strategies for biosensing

Controlled/“living” radical polymerization-based signal amplification strategies and their applications in highly sensitive biosensing of clinically relevant biomolecules are reviewed.

Amplification-by-Polymerization in Biosensing for Human Genomic DNA Detection

A polymerization reaction was employed as a signal amplification method to realize direct visualization of gender-specific DNA extracted from human blood in a polymerase chain reaction (PCR)-free fashion. Clear distinction between X and Y chromosomes was observed by naked eyes for detector-free sensing purposes. The grown polymer films atop X and Y chromosomes were quantitatively measured by ellipsometry for thickness readings. Detection assays have been optimized for genomic DNA recognition to a maximum extent by varying the selection of the proper blocking reagents, the annealing temperature, and the annealing time. Traditional PCR and gel electrophoresis for amplicon identification were conducted in parallel for performance comparison. In the blind test for blood samples examined by the new approach, 25 out of 26 were correct and one was false negative, which was comparable to, if not better than, the PCR results. This is the first time our amplification-by-polymerization technique is being used for chromosome DNA analysis. The potential of adopting the described sensing technique without PCR was demonstrated, which could further promote the development of a portable, PCR-free DNA sensing device for point-of-need applications.

Hemozoin-catalyzed precipitation polymerization as an assay for malaria diagnosis

Methods to diagnose malaria are of paramount interest to eradicate the disease. Current methods have severe limitations, as they are either costly or not sensitive enough to detect low levels of parasitemia. Here we report an ultrasensitive, yet low-resource chemical assay for the detection and quantification of hemozoin, a biomarker of all Plasmodium species. Solubilized hemozoin catalyzes the atom transfer radical polymerization of N-isopropylacrylamide above the lower critical solution temperature of poly(N-isopropylacrylamide). The solution becomes turbid, which can be observed by naked eye and quantified by UV-visible spectroscopy. The rate of turbidity increase is proportional to the concentration of hemozoin, with a detection limit of 0.85 ng mL-1. Malaria parasites in human blood can be detected down to 10 infected red blood cells μL-1. The assay could potentially be applied as a point-of-care test. The signal-amplification of an analyte by biocatalytic precipitation polymerization represents a powerful approach in biosensing.

Fluorogenic atom transfer radical polymerization in aqueous media as a strategy for detection

The development of novel approaches to signal amplification in aqueous media could enable new diagnostic platforms for the detection of water-soluble analytes, including biomolecules. This paper describes a fluorogenic polymerization approach to amplify initiator signal by the detection of visible fluorescence upon polymerization in real-time. Fluorogenic monomers were synthesized and co-polymerized by atom transfer radical polymerization (ATRP) in water to reveal increasing polymer fluorescence as a function of both reaction time and initiator concentration. Optimization of the fluorogenic ATRP reaction conditions allowed for the quantitative detection of a small-molecule initiator as a model analyte over a broad linear concentration range (pM to mM). Raising the reaction temperature from 30 °C to 60 °C facilitated sensitive initiator detection at sub-picomolar concentrations in as little as 1 h of polymerization. This method was then applied to the detection of streptavidin as a model biological analyte by fluorogenic polymerization from a designed biotinylated ATRP initiator. Taken together, these studies represent the first example of a fluorogenic ATRP reaction and establish fluorogenic polymerization as a promising approach for the direct detection of aqueous analytes and biomolecular recognition events.

A novel thermometer-type hydrogel senor for glutathione detection

A thermometer-type visual sensor for glutathione (GSH) sensing was developed with stimulus-responsive fluorescent hydrogel which was obtained by using 5, 6-bicarboxylic fluorescein crossli`nked partly ammoniated polyacrylamide. Various experimental parameters such as the particle size of hydrogel, buffer solution and swelling time were optimized. It is accessible to measure the volume change of hydrogel with the sensor by reading the graduation on a pipette like thermometer with naked eye. The concentration of the GSH depended on the volume in a certain range as the signal. Satisfactory agreements between the sensor and HPLC results for atuomolan tablet assays indicated the capability of the thermometer-type sensors for the analysis of real samples. These findings proved the utility of stimulus-responsive, intelligent hydrogel and the suitability of thermometer-style visual sensor design for quantitative assays.

Using photo-initiated polymerization reactions to detect molecular recognition

Radical polymerization reactions initiated by light can be used to provide signal amplification in molecular binding assays.

Highly sensitive fluorescent sensor for mercury based on hyperbranched rolling circle amplification

A label-free hyperbranched rolling circle amplification (HRCA) based fluorescent sensor has been developed for Hg²⁺detection.

Fabrication of a photocontrolled surface with switchable wettability based on host-guest inclusion complexation and protein resistance

A novel surface-modification strategy has been developed for the construction of a photocontrolled silicon wafer surface with switchable wettability based on host-guest inclusion complexation. The silicon wafer was first modified by guest molecule azobenzene (Azo) via a silanization reaction. Subsequently, a series of polymers with different polarities were attached to host molecule β-cyclodextrin (β-CD) to prepare β-CD-containing hemitelechelic polymers via click chemistry. Finally, a photocontrolled silicon wafer surface modified with polymers was fabricated by inclusion complexation between β-CD and Azo, and the surface properties of the substrate are dependent on the polymers we used. The elemental composition, surface morphology, and hydrophilic/hydrophobic property of the modified surfaces were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscope, and contact angle measurements, respectively. The antifouling property of the PEG-functionalized surface was evaluated by a protein adsorption assay using bovine serum albumin, which was also characterized by XPS. The results demonstrate that the surface modified with PEG possesses good protein-resistant properties.

An ultrasensitive aptameric sensor for proteins based on hyperbranched rolling circle amplification

A novel fluorescent aptameric sensor for thrombin has been developed by combination of the high amplification efficiency of HRCA and the specific function of aptameric recognition.

Fabrication of magneto-controlled moveable architecture to develop reusable electrochemical biosensors

Electrochemical biosensors have been studied intensively for several decades. Numerous sensing concepts and related interface architectures have been developed. However, all such architectures suffer a trade-off: simple architectures favour usability, whereas complex architectures favour better performance. To overcome this problem, we propose a novel concept by introducing a magneto-controlled moveable architecture (MCMA) instead of the conventional surface-fixed architecture. As a model, human breast cancer cells were used in this study. The results showed that a detection range from 100 to 1 × 10⁶ cells could be achieved. Moreover, the whole detection cycle, including the measurement and the regeneration, could be completed in only 2 min. Thus, usability and excellent performance can be achieved in a single biosensor.

Electrogenerated chemiluminescence of iridium-containing ROMP block copolymer and self-assembled micelles

The electrochemical properties and electrogenerated chemiluminescence (ECL) of an Ir(ppy)2(bpy)(+)-containing ROMP monomer, block copolymer (containing Ir(ppy)2(bpy)(+) complexes, PEG chains, and butyl moieties), and self-assembled micelles were investigated. Following polymerization of the iridium complex, we observed multiple oxidation peaks for the block copolymer in cyclic voltammograms (CV) and differential pulse voltammograms (DPV), suggesting the presence of multiple environments for the iridium complexes along the polymer backbone. The ECL signals from monomer 1 and polymer 2 were reproducible over continuous CV cycles and stable over prolonged potential biases, demonstrating their robustness toward ECL-based detection. Comparison of the ECL signal of the block copolymer, containing multiple iridium complexes attached to the backbone, and the monomeric complex showed enhanced signals for the polymer. In fact, formation and reopening of the self-assembled micelles allowed recovery of the polymer and near complete retention of its original ECL intensity.