Multicolor tuning of lanthanide-doped nanoparticles by single wavelength excitation

Triple-Phosphorescent Gold Nanoclusters Enabled by Isomerization of Terminal Thiouracils in the Surface Motifs

Metal nanoclusters (NCs) hold great promise for expressing multipeak emission based on their well-defined total structure with diverse luminescent centers. Herein, we report the surface motif-dictated triple phosphorescence of Au NCs with dynamic color turning. The deprotonation-triggered isomerization of terminal thiouracils can evolve into a mutual transformation among their hierarchical motifs, thus serving a multipeak-emission expression with good tailoring. More importantly, the underlying electron transfer is thoroughly identified by excluding the radiative and nonradiative energy transfer, where electrons flow from the first phosphorescent state to the last two ones. The findings shed light on finely tailing motifs at the molecular level to motivate studies on customizable luminescence characteristics of metal NCs.

Size-Dependent Blue Emission from Europium-Doped Strontium Fluoride Nanoscintillators for X-Ray-Activated Photodynamic Therapy

Successful implementation of X-ray-activated photodynamic therapy (X-PDT) is challenging because most photosensitizers (PSs) absorb light in the blue region, but few nanoscintillators produce efficient blue scintillation. Here, efficient blue-emitting SrF2:Eu scintillating nanoparticles (ScNPs) are developed. The optimized synthesis conditions result in cubic nanoparticles with ≈32 nm diameter and blue emission at 416 nm. Coating them with the meso-tetra(n-methyl-4-pyridyl) porphyrin (TMPyP) in a core-shell structure (SrF@TMPyP) results in maximum singlet oxygen (1O2) generation upon X-ray irradiation for nanoparticles with 6TMPyP depositions (SrF@6TMPyP). The 1O2 generation is directly proportional to the dose, does not vary in the low-energy X-ray range (48-160 kVp), but is 21% higher when irradiated with low-energy X-rays than irradiations with higher energy gamma rays. In the clonogenic assay, cancer cells treated with SrF@6TMPyP and exposed to X-rays present a significantly reduced survival fraction compared to the controls. The SrF2:Eu ScNPs and their conjugates stand out as tunable nanoplatforms for X-PDT due to the efficient blue emission from the SrF2:Eu cores; the ability to adjust the scintillation emission in terms of color and intensity by controlling the nanoparticle size; the efficient 1O2 production when conjugated to a PS and the efficacy of killing cancer cells.

Upconversion Nanoparticles Based Sensing: From Design to Point-of-Care Testing

Rare earth-doped upconversion nanoparticles (UCNPs) have achieved a wide range of applications in the sensing field due to their unique anti-Stokes luminescence property, minimized background interference, excellent biocompatibility, and stable physicochemical properties. However, UCNPs-based sensing platforms still face several challenges, including inherent limitations from UCNPs such as low quantum yields and narrow absorption cross-sections, as well as constraints related to energy transfer efficiencies in sensing systems. Therefore, the construction of high-performance UCNPs-based sensing platforms is an important cornerstone for conducting relevant research. This work begins by providing a brief overview of the upconversion luminescence mechanism in UCNPs. Subsequently, it offers a comprehensive summary of the sensors' types, design principles, and optimized design strategies for UCNPs sensing platforms. More cost-effective and promising point-of-care testing applications implemented based on UCNPs sensing systems are also summarized. Finally, this work addresses the future challenges and prospects for UCNPs-based sensing platforms.

Highly Specific Sulfadiazine Detection Using a Two-Dimensional Europium-Organic Coordination Polymer

Sulfadiazine (SFZ) is an inexpensive large-consumption antibiotic used for treat bacterial infections but an excess of residues in food can be harmful. Fast and specific luminescence detection of SFZ is highly challenging because of the interference of structurally similar antibiotics. In this work, we develop a two-dimensional europium-organic coordination polymer with excellent luminescence and water stability for highly specific detection of SFZ in the range of 0-0.2 mM. Structural analysis shows that the high stability of coordination polymer is due to the high coordination number of europium ion and the special chelating coordination structure of ligand. The experiment results revealed that the high selectivity and effectively luminescence quenched behaviour of coordination polymer toward SFZ is caused by highly efficient inner filter effect.

Preparation of waterborne anti-counterfeiting ink based on dual luminescent nanohybrids of bacterial cellulose nanocrystals and lanthanide‑nitrogen co-modified GQDs

To address the growing challenge of counterfeit prevention, this study developed a novel anti-counterfeiting ink system based on bacterial cellulose nanocrystals (BCNC) and lanthanide (Er, Yb)‑nitrogen (N) co-dropped graphene quantum dots (GQDs), which exhibited both photoluminescence (PL) and upconversion photoluminescence (UCPL) fluorescent properties as well as excellent rheological characteristics. The Er/Yb/N-GQDs with positive charges were synthesized by a one-step hydrothermal method and subsequently assembled with negatively charged BCNC through electrostatic self-assembly to fabricate a novel nanohybrid, Er/Yb/N-GQDs-BCNC. Raman spectroscopy results indicated an enhancement in the graphitization of GQDs due to lanthanide modification. The TEM results demonstrated a homogeneous distribution of Er/Yb/N-GQDs on BCNC, while XRD, FTIR, and XPS analyses confirmed their physical binding, thus validating the successful synthesis of novel nanohybrids. Then, Er/Yb/N-GQDs-BCNC was introduced into PVA waterborne ink and exhibited dual anti-counterfeiting properties by emitting blue fluorescence at Em 440 nm under Ex 370 nm and green fluorescence at Em 550 nm under Ex 980 nm. Furthermore, the incorporation of BCNC significantly enhanced the thixotropic behavior and yield stress of the PVA waterborne ink. This enhancement made the dual anti-counterfeiting fluorescent ink more suitable for diversified applications on different devices and various substrates, thus providing a novel approach for convenient and rapid information encryption and high security anti-counterfeiting.

Aromatic and magnetic properties in a series of heavy rare earth-doped Ge6 cluster anions

A series of pentagonal bipyramidal anionic germanium clusters doped with heavy rare earth elements,REGe 6 - (RE = Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu), have been identified at the PBE0/def2-TZVP level using density functional theory (DFT). Our findings reveal that the centrally doped pentagonal ring structure demonstrates enhanced stability and heightened aromaticity due to its uniform bonding characteristics and a larger charge transfer region. Through natural population analysis and spin density diagrams, we observed a monotonic decrease in the magnetic moment from Gd to Yb. This is attributed to the decreasing number of unpaired electrons in the 4f orbitals of the heavy rare earth atoms. Interestingly, the system doped with Er atoms showed lower stability and anti-aromaticity, likely due to the involvement of the 4f orbitals in bonding. Conversely, the systems doped with Gd and Tb atoms stood out for their high magnetism and stability, making them potential building blocks for rare earth-doped semiconductor materials.

Luminescence properties of a green-emitting mechanoluminescent phosphor CaSrGa4O8:xTb3+ without pre-excitation

In this study, both mechanoluminescence (ML) and long persistent luminescence (LPL) characteristics were first observed in CaSrGa4O8 doped with Tb3+ ions, which confirmed that CaSrGa4O8 is a high-quality host for luminescent material research. Notably, the samples show stronger mechanoluminescent intensity with increasing Tb3+ doping. Additionally, the introduction of Tb3+ led to a shift of the thermoluminescence peak towards higher temperatures and a substantial increase in its intensity, suggesting that Tb3+ doping enhances the overall trap concentration and introduces deeper trap energy levels. Presumably, the free carriers in the system recombine upon mechanical stimulation, releasing energy that is transferred to Tb3+ ions. Investigations into the intrinsic structure, matrix effects, and trap evolution of the material confirmed that deep and shallow traps are responsible for the observed ML and LPL phenomena, respectively. The elucidation of the unique luminescent properties of the material provides us with some guidance for the development of new multi-functional luminescent materials.

Communicating Supraparticles to Enable Perceptual, Information-Providing Matter

Materials are the fundament of the physical world, whereas information and its exchange are the centerpieces of the digital world. Their fruitful synergy offers countless opportunities for realizing desired digital transformation processes in the physical world of materials. Yet, to date, a perfect connection between these worlds is missing. From the perspective, this can be achieved by overcoming the paradigm of considering materials as passive objects and turning them into perceptual, information-providing matter. This matter is capable of communicating associated digitally stored information, for example, its origin, fate, and material type as well as its intactness on demand. Herein, the concept of realizing perceptual, information-providing matter by integrating customizable (sub-)micrometer-sized communicating supraparticles (CSPs) is presented. They are assembled from individual nanoparticulate and/or (macro)molecular building blocks with spectrally differentiable signals that are either robust or stimuli-susceptible. Their combination yields functional signal characteristics that provide an identification signature and one or multiple stimuli-recorder features. This enables CSPs to communicate associated digital information on the tagged material and its encountered stimuli histories upon signal readout anywhere across its life cycle. Ultimately, CSPs link the materials and digital worlds with numerous use cases thereof, in particular fostering the transition into an age of sustainability.

Seeking Brightness in Molecular Erbium-Based Light Upconversion

Whereas dye-sensitized lanthanide-doped nanoparticles represent an unquestionable advance for pushing linear near-infrared (NIR) to visible-light upconversion within the frame of applications, analogous improvements are difficult to mimic for related but intramolecular processes induced at the molecular level in coordination complexes. Major difficulties arise from the cationic nature of the target cyanine-containing sensitizers (S), which drastically limits their thermodynamic affinities for catching the lanthanide activators (A) required for performing linear light upconversion. In this context, the rare previous design of stable dye-containing molecular SA light-upconverters required large S···A distances at the cost of the operation of only poorly efficient intramolecular S → A energy transfers and global sensitization. With the synthesis of the compact ligand [L2]⁺, we exploit here the benefit of using a single sulfur connector between the dye and the binding unit for counterbalancing the drastic electrostatic penalty which is expected to prevent metal complexation. Quantitative amounts of nine-coordinate [L2Er(hfac)₃]⁺ molecular adducts could be finally prepared in solution at millimolar concentrations, while the S···A distance has been reduced by 40% to reach circa 0.7 nm. Detailed photophysical studies demonstrate the operation of a three times improved energy transfer upconversion (ETU) mechanism for molecular [L2Er(hfac)₃]⁺ in acetonitrile at room temperature, thanks to the boosted heavy atom effect operating in the close cyanine/Er pair. NIR excitation at 801 nm can thus be upconverted into visible light (525-545 nm) with an unprecedented brightness of B^up(801 nm) = 2.0(1) × 10^-3 M^-1·cm^-1 for a molecular lanthanide complex.

Nanoparticles-mediated ion channels manipulation: From their membrane interactions to bioapplications

Ion channels are transmembrane proteins ubiquitously expressed in all cells that control various ions (e.g. Na⁺, K⁺, Ca²⁺ and Cl^- etc) crossing cellular plasma membrane, which play critical roles in physiological processes including regulating signal transduction, cell proliferation as well as excitatory cell excitation and conduction. Abnormal ion channel function is usually associated with dysfunctions and many diseases, such as neurodegenerative disorders, ophthalmic diseases, pulmonary diseases and even cancers. The precise regulation of ion channels not only helps to decipher physiological and pathological processes, but also is expected to become cutting-edge means for disease treatment. Recently, nanoparticles-mediated ion channel manipulation emerges as a highly promising way to meet the increasing requirements with respect to their simple, efficient, precise, spatiotemporally controllable and non-invasive regulation in biomedicine and other research frontiers. Thanks the advantages of their unique properties, nanoparticles can not only directly block the pore sites or kinetics of ion channels through their tiny size effect, and perturb active voltage-gated ion channel by their charged surface, but they can also act as antennas to conduct or enhance external physical stimuli to achieve spatiotemporal, precise and efficient regulation of various ion channel activities (e.g. light-, mechanical-, and temperature-gated ion channels etc). So far, nanoparticles-mediated ion channel regulation has shown potential prospects in many biomedical fields at the interfaces of neuro- and cardiovascular modulation, physiological function regeneration and tumor therapy et al. Towards such important fields, in this typical review, we specifically outline the latest studies of different types of ion channels and their activities relevant to the diseases. In addition, the different types of stimulation responsive nanoparticles, their interaction modes and targeting strategies towards the plasma membrane ion channels will be systematically summarized. More importantly, the ion channel regulatory methods mediated by functional nanoparticles and their bioapplications associated with physiological modulation and therapeutic development will be discussed. Last but not least, current challenges and future perspectives in this field will be covered as well.

Emerging ultrasmall luminescent nanoprobes for in vivo bioimaging

Photoluminescence (PL) imaging has become a fundamental tool in disease diagnosis, therapeutic evaluation, and surgical navigation applications. However, it remains a big challenge to engineer nanoprobes for high-efficiency in vivo imaging and clinical translation. Recent years have witnessed increasing research efforts devoted into engineering sub-10 nm ultrasmall nanoprobes for in vivo PL imaging, which offer the advantages of efficient body clearance, desired clinical translation potential, and high imaging signal-to-noise ratio. In this review, we present a comprehensive summary and contrastive discussion of emerging ultrasmall luminescent nanoprobes towards in vivo PL bioimaging of diseases. We first summarize size-dependent nano-bio interactions and imaging features, illustrating the unique attributes and advantages/disadvantages of ultrasmall nanoprobes differentiating them from molecular and large-sized probes. We also discuss general design methodologies and PL properties of emerging ultrasmall luminescent nanoprobes, which are established based on quantum dots, metal nanoclusters, lanthanide-doped nanoparticles, and silicon nanoparticles. Then, recent advances of ultrasmall luminescent nanoprobes are highlighted by surveying their latest in vivo PL imaging applications. Finally, we discuss existing challenges in this exciting field and propose some strategies to improve in vivo PL bioimaging and further propel their clinical applications.

Lanthanide-Doped Upconversion Nanoparticles: Exploring A Treasure Trove of NIR-Mediated Emerging Applications

Lanthanide-doped upconversion nanoparticles (UCNPs) possess the remarkable ability to convert multiple near-infrared (NIR) photons into higher energy ultraviolet-visible (UV-vis) photons, making them a prime candidate for several advanced applications within the realm of nanotechnology. Compared to traditional organic fluorophores and quantum dots (QDs), UCNPs possess narrower emission bands (fwhm of 10-50 nm), large anti-Stokes shifts, low toxicity, high chemical stability, and resistance to photobleaching and blinking. In addition, unlike UV-vis excitation, NIR excitation is nondestructive at lower power intensities and has high tissue penetration depths (up to 2 mm) with low autofluorescence and scattering. Together, these properties make UCNPs exceedingly favored for advanced bioanalytical and theranostic applications, where these systems have been well-explored. UCNPs are also well-suited for bioimaging, optically modulating chemistries, forensic science, and other state-of-the-art research applications. In this review, an up-to-date account of emerging applications in UCNP research, beyond bioanalytical and theranostics, are presented including optogenetics, super-resolution imaging, encoded barcodes, fingerprinting, NIR vision, UCNP-assisted photochemical manipulations, optical tweezers, 3D printing, lasing, NIR-II imaging, UCNP-molecule nanohybrids, and UCNP-based persistent luminescent nanocrystals.

Recent Developments of Microscopic Study for Lanthanide and Manganese Doped Luminescent Materials

Luminescent materials are indispensable for applications in lighting, displays and photovoltaics, which can transfer, absorb, store and utilize light energy. Their performance is closely related with their size and morphologies, exact atomic arrangement, and local configuration about photofunctional centers. Advanced electron microscopy-based techniques have enabled the possibility to study nanostructures with atomic resolution. Especially, with the advanced micro-electro-mechanical systems, it is able to characterize the luminescent materials at the atomic scale under various environments, providing a deep understanding of the luminescent mechanism. Accordingly, this review summarizes the recent achievements of microscopic study to directly image the microstructure and local environment of activators in lanthanide and manganese (Ln/Mn²⁺ )-doped luminescent materials, including: 1) bulk materials, the typical systems are nitride/oxynitride phosphors; and 2) nanomaterials, such as nanocrystals (hexagonal-phase NaLnF₄ and perovskite) and 2D nanosheets (Ca₂ Ta₃ O₁₀ and MoS₂ ). Finally, the challenges and limitations are highlighted, and some possible solutions to facilitate the developments of advanced luminescent materials are provided.

Bioimaging with Upconversion Nanoparticles

Bioimaging enables the spatiotemporal visualization of biological processes at various scales empowered by a range of different imaging modalities and contrast agents. Upconversion nanoparticles (UCNPs) represent a distinct type of such contrast agents with the potential to transform bioimaging due to their unique optical properties and functional design flexibilities. This review explores and discusses the opportunities, challenges, and limitations that UCNPs exhibit as bioimaging probes and highlights applications with spatial dimensions ranging from the single nanoparticle level to cellular, tissue, and whole animal imaging. We further summarized recent advancements in bioimaging applications enabled by UCNPs, including super-resolution techniques and multimodal imaging methods, and provide a perspective on the future potential of UCNP-based technologies in bioimaging research and clinical translation. This review may provide a valuable resource for researchers interested in exploring and applying UCNP-based bioimaging technologies.

Recent Progress in Smart Polymeric Gel-Based Information Storage for Anti-Counterfeiting

Information security protection has a tremendous impact on human life, social stability and national security, leading to the rapid development of anti-counterfeiting materials and related techniques. However, the traditional stored information on hard or dry media is often static and lacks functions, which makes it challenging to deal with increasing and powerful counterfeiting technologies. Modified intelligent polymeric gels exhibit color changes and shape morphing under external stimuli, which give them great potential for applications in information storage. This paper provides an overview of the latest progress in polymeric gel-based information storage materials in relation to counterfeiting. Following a brief introduction of anti-counterfeiting materials, the preparation methods for intelligent gels with adjustable colors (e.g., chemical colors and physical colors) and various encryption/decryption modes involving dimensions and diverse colors are outlined. Finally, the challenges and prospects for information storage and anti-counterfeiting based on smart gels are discussed.

Nanoparticle-based single molecule fluorescent probes

Single molecule fluorescent probes have attracted considerable attention duet to their ultimate sensitivity, fast response, low sample consumption, and high signal-to-noise ratio. Nanoparticles with outstanding optical properties make them perfect candidates for probes in application of single molecule detection. In this review, we focus on various kinds of nanoparticles acting as single molecule fluorescent probes, including quantum dots, upconverting fluorescent nanoparticles, carbon dots, single-wall carbon nanotubes, fluorescent nanodiamonds, polymeric nanoparticles, nanoclusters, and metallic nanoparticles. Optical properties of various nanoparticles and their recent application in single molecule fluorescent probes are explored. How nanoparticles boost the sensitivity of detection is emphasized in combination with different sensing strategies. Future trends of nanoparticles in single molecule detection are also discussed. We hope this review can provide practical guidance for researchers who work on nanoparticle-based single molecule fluorescent probes.

Recent advances in cellular optogenetics for photomedicine

Since the successful introduction of exogenous photosensitive proteins, channelrhodopsin, to neurons, optogenetics has enabled substantial understanding of profound brain function by selectively manipulating neural circuits. In an optogenetic system, optical stimulation can be precisely delivered to brain tissue to achieve regulation of cellular electrical activity with unprecedented spatio-temporal resolution in living organisms. In recent years, the development of various optical actuators and novel light-delivery techniques has greatly expanded the scope of optogenetics, enabling the control of other signal pathways in non-neuronal cells for different biomedical applications, such as phototherapy and immunotherapy. This review focuses on the recent advances in optogenetic regulation of cellular activities for photomedicine. We discuss emerging optogenetic tools and light-delivery platforms, along with a survey of optogenetic execution in mammalian and microbial cells.

Rapid Aqueous-Phase Synthesis and Photoluminescence Properties of K0.3Bi0.7F2.4:Ln3+ (Ln = Eu, Tb, Pr, Nd, Sm, Dy) Nanocrystalline Particles

Trivalent lanthanides (Ln3+) doped bismuth-based inorganic compounds have attracted considerable interest as promising candidates for next-generation inorganic luminescent materials. Here, a series of K0.3Bi0.7F2.4 (KBF) nanocrystalline particles with controlled morphology have been synthesized through a low-temperature aqueous-phase precipitation method. Using KBF as the host matrix, Eu3+, Tb3+, Pr3+, Nd3+, Sm3+, and Dy3+ ions are introduced to obtain K0.3Bi0.7F2.4:Ln3+ (KBF:Ln) nanophosphors. The as-prepared KBF:Ln nanophosphors exhibit commendable photoluminescence properties, in which multicolor emissions in a single host lattice can be obtained by doping different Ln3+ ions when excited by ultraviolet light. Moreover, the morphology and photoluminescence performance of these nanophosphors remain unchanged under different soaking times in water, showing good stability in a humid environment. The proposed simple and rapid synthesis route, low-cost and nontoxic bismuth-based host matrix, and tunable luminescent colors will lead the way to access these KBF:Ln nanophosphors for appealing applications such as white LEDs and optical thermometry.

Ultralarge anti-Stokes lasing through tandem upconversion

Coherent ultraviolet light is important for applications in environmental and life sciences. However, direct ultraviolet lasing is constrained by the fabrication challenge and operation cost. Herein, we present a strategy for the indirect generation of deep-ultraviolet lasing through a tandem upconversion process. A core-shell-shell nanoparticle is developed to achieve deep-ultraviolet emission at 290 nm by excitation in the telecommunication wavelength range at 1550 nm. The ultralarge anti-Stokes shift of 1260 nm (~3.5 eV) stems from a tandem combination of distinct upconversion processes that are integrated into separate layers of the core-shell-shell structure. By incorporating the core-shell-shell nanoparticles as gain media into a toroid microcavity, single-mode lasing at 289.2 nm is realized by pumping at 1550 nm. As various optical components are readily available in the mature telecommunication industry, our findings provide a viable solution for constructing miniaturized short-wavelength lasers that are suitable for device applications.

Controlling upconversion in emerging multilayer core-shell nanostructures: from fundamentals to frontier applications

Lanthanide-based upconversion nanomaterials have recently attracted considerable attention in both fundamental research and various frontier applications owing to their excellent photon upconversion performance and favourable physicochemical properties. In particular, the emergence of multi-layer core-shell (MLCS) nanostructures offers a versatile and powerful tool to realize well-defined matrix compositions and spatial distributions of the dopant on the nanometer length scale. In contrast to the conventional nanomaterials and commonly investigated core-shell nanoparticles, the rational design of MLCS nanostructures allows us to deliberately introduce more functional properties into an upconversion system, thus providing unprecedented opportunities for the precise manipulation of energy transfer channels, the dynamic control of upconversion processes, the fine tuning of switchable emission colours and new functional integration at a single-particle level. In this review, we present a summary and discussion on the key aspects of the recent progress in lanthanide-based MLCS nanoparticles, including the manipulation of emission and lifetime, the switchable multicolour output and the lanthanide ionic interactions on the nanoscale. Benefitting from the multifunctional and versatile luminescence properties, the MLCS nanostructures exhibit great potential in diversities of frontier applications such as three-dimensional display, upconversion laser, optical memory, anti-counterfeiting, thermometry, bioimaging, and therapy. The outlook and challenges as well as perspectives for the research in MLCS nanostructure materials are also provided. This review would be greatly helpful in exploring new structural designs of lanthanide-based materials to further manipulate the upconversion phenomenon and expand their application boundaries.

Rare-Earth Doping in Nanostructured Inorganic Materials

Impurity doping is a promising method to impart new properties to various materials. Due to their unique optical, magnetic, and electrical properties, rare-earth ions have been extensively explored as active dopants in inorganic crystal lattices since the 18th century. Rare-earth doping can alter the crystallographic phase, morphology, and size, leading to tunable optical responses of doped nanomaterials. Moreover, rare-earth doping can control the ultimate electronic and catalytic performance of doped nanomaterials in a tunable and scalable manner, enabling significant improvements in energy harvesting and conversion. A better understanding of the critical role of rare-earth doping is a prerequisite for the development of an extensive repertoire of functional nanomaterials for practical applications. In this review, we highlight recent advances in rare-earth doping in inorganic nanomaterials and the associated applications in many fields. This review covers the key criteria for rare-earth doping, including basic electronic structures, lattice environments, and doping strategies, as well as fundamental design principles that enhance the electrical, optical, catalytic, and magnetic properties of the material. We also discuss future research directions and challenges in controlling rare-earth doping for new applications.

Modulating electron population pathways for time-dependent dynamic multicolor displays

Multicolor luminescent nanoparticles (NPs) show several potential emerging applications. In this work, we provide a new route that integrates the afterglow and upconversion (UC) that originate in a single activator to achieve color variations without the modulation of any other parameters. The Er³⁺ ions in Na₃HfF₇:Yb/Er NPs exhibit bright green afterglow upon X-ray irradiation and single-band red UC under 980 nm laser excitation, which are attributed to the significantly different electron population pathways. The UC intensity is stable and the afterglow decreases gradually over time, thus the output color is clearly changed from green to red naturally via illuminating the pre-X-ray-irradiated NPs with a 980 nm laser. Furthermore, the fine emission profiles of Er³⁺, Ho³⁺ and Tm³⁺ are achieved upon X-ray irradiation. Our results develop a new approach for time-dependent dynamic color displays and a simple route to revealing the electronic fine structures of lanthanide activators at room temperature.

Enhancing Dye-Triplet-Sensitized Upconversion Emission Through the Heavy-Atom Effect in CsLu2 F7 :Yb/Er Nanoprobes

Lanthanide (Ln³⁺ )-doped upconversion (UC) nanoprobes, which have drawn extensive attention for various bioapplications, usually suffer from small absorption cross-sections and weak luminescence intensity of Ln³⁺ ions. Herein, we report the controlled synthesis of a new class of Ln³⁺ -doped UC nanoprobes based on CsLu₂ F₇ :Yb/Er nanocrystals (NCs), which can effectively increase the intersystem crossing (ISC) efficiency from singlet excited state to triplet excited state of IR808 up to 99.3 % through the heavy atom effect. By virtue of the efficient triplet sensitization of IR808, the optimal UC luminescence (UCL) intensity of IR808-modified CsLu₂ F₇ :Yb/Er NCs is enhanced by 1309 times upon excitation at 808 nm. Benefiting from the intense dye-triplet-sensitized UCL, the nanoprobes are demonstrated for sensitive assay of extracellular and intracellular hypochlorite with an 808-nm/980-nm dual excited ratiometric strategy.

Application of lanthanide-doped upconversion nanoparticles for cancer treatment: a review

With the excellent ability to transform near-infrared light to localized visible or UV light, thereby achieving deep tissue penetration, lanthanide ion-doped upconversion nanoparticles (UCNP) have emerged as one of the most striking nanoscale materials for more effective and safer cancer treatment. Up to now, UCNPs combined with photosensitive components have been widely used in the delivery of chemotherapy drugs, photodynamic therapy and photothermal therapy. Applications in these directions are reviewed in this article. We also highlight microenvironmental tumor monitoring and precise targeted therapies. Then we briefly summarize some new trends and the existing challenges for UCNPs. We hope this review can provide new ideas for future cancer treatment based on UCNPs.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Functional Micro-/Nanomaterials for Multiplexed Biodetection

When analyzing biological phenomena and processes, multiplexed biodetection has many advantages over single-factor biodetection and is highly relevant to both human health issues and advancements in the life sciences. However, many key problems with current multiplexed biodetection strategies remain unresolved. Herein, the main issues are analyzed and summarized: 1) generating sufficient signal to label targets, 2) improving the signal-to-noise ratio to ensure total detection sensitivity, and 3) simplifying the detection process to reduce the time and labor costs of multiple target detection. Then, available solutions made possible by designing and controlling the properties of micro- and nanomaterials are introduced. The aim is to emphasize the role that micro-/nanomaterials can play in the improvement of multiplexed biodetection strategies. Through analyzing existing problems, introducing state-of-the-art developments regarding relevant materials, and discussing future directions of the field, it is hopeful to help promote necessary developments in multiplexed biodetection and associated scientific research.

Near-infrared photon-excited energy transfer in platinum(II)-based supramolecular polymers assisted by upconverting nanoparticles

A novel hybrid supramolecular system with near-infrared photon-excited energy transfer has been successfully constructed, relying on the assistance of upconversion nanoparticles in platinum(ii)-based supramolecular polymers. The resulting hybrid system is capable of displaying intriguing photo-switchable and sequential energy transfer features.

Color tuning in a compact core-shell nanocrystal based on intense and high-purity green and red photon upconversion

To date, color-tunable photon upconversion (UC) in a single nanocrystal (NC) still suffers from cumbersome structures. Herein, we prepared a compact two-layer NC with bright and high-purity red and green UC emission upon 980 and 1530 nm excitation, respectively. The effects of trace Tm³⁺ doping and inert-shell coating on the UC color and intensity were discussed. In addition, the color tuning via various dual-excitation configurations and the color stability with temperature and excitation intensity were demonstrated. The proposed UC NC, featuring compact structure and high-quality color tuning, can lower the synthesis time cost and difficulty of its kind and can find wide applications in multi-channel imaging, display devices, anti-counterfeiting, and so on.

Overcoming thermal quenching in upconversion nanoparticles

Thermal quenching that is characterized by loss of light emission with increasing temperature is widely observed in luminescent materials including upconversion nanoparticles, causing problems in technological applications such as lighting, displays, and imaging. Because upconversion processes involve extensive intra-particle energy transfer that is temperature dependent, methods have been established to fight against thermal quenching in upconversion nanoparticles by engineering the energy transfer routes. In this minireview, we discuss the origin of thermal quenching and the role of energy transfer in thermal quenching. Accordingly, recent efforts in overcoming thermal quenching of upconversion are summarized.

Stepwise Assembly Protocols for the Rational Design of Lanthanide Functionalized Carbon Dots-Hydrogel and its Sensing Evaluation

Inorganic-organic optical probe based on lanthanide emission will provide a new way for specific applications. In this work, sarcosine and urea are selected as raw materials to synthesize carbon dots with cyan-emissive color. In the next step, indicator components (Ethylene Diamine Tetraacetic Acid and lanthanide ions) are incorporated onto carbon quantum dots (CQDs) and the flexible alginate hydrogel is employed as the host to accommodate the emissive species. The soft material can exhibit typical red and green emissions. Its luminescence is responsive to calcium ions and the detection limit has been calculated to be 0.84 μM and 0.92 μM respectively. Such optical device can be employed as a portable probe in a variety of scientific fields due to its convenience and flexibility.

Lanthanide-Based Nanosensors: Refining Nanoparticle Responsiveness for Single Particle Imaging of Stimuli

Lanthanide nanoparticles (LNPs) are promising sensors of chemical, mechanical, and temperature changes; they combine the narrow-spectral emission and long-lived excited states of individual lanthanide ions with the high spatial resolution and controlled energy transfer of nanocrystalline architectures. Despite considerable progress in optimizing LNP brightness and responsiveness for dynamic sensing, detection of stimuli with a spatial resolution approaching that of individual nanoparticles remains an outstanding challenge. Here, we highlight the existing capabilities and outstanding challenges of LNP sensors, en-route to nanometer-scale, single particle sensor resolution. First, we summarize LNP sensor read-outs, including changes in emission wavelength, lifetime, intensity, and spectral ratiometric values that arise from modified energy transfer networks within nanoparticles. Then, we describe the origins of LNP sensor imprecision, including sensitivity to competing conditions, interparticle heterogeneities, such as the concentration and distribution of dopant ions, and measurement noise. Motivated by these sources of signal variance, we describe synthesis characterization feedback loops to inform and improve sensor precision, and introduce noise-equivalent sensitivity as a figure of merit of LNP sensors. Finally, we project the magnitudes of chemical and pressure stimulus resolution achievable with single LNPs at nanoscale resolution. Our perspective provides a roadmap for translating ensemble LNP sensing capabilities to the single particle level, enabling nanometer-scale sensing in biology, medicine, and sustainability.

Upconversion Nanodevice-Assisted Healthy Molecular Photocorrection

Mushrooms are rich in ergosterol, a precursor of ergocalciferol, which is a type of vitamin D₂. The conversion of ergosterol to ergocalciferol takes place in the presence of UV radiation by the cleavage of the "B-ring" in the ergosterol. As the UV radiation cannot penetrate deep into the tissue, only minimal increase occurs in sunlight. In this study, upconversion nanoparticles with the property to convert deep-penetrating near-infrared radiation to UV radiation have been cast into a disk to use sunlight and emit UV radiation for vitamin D conversion. An engineered upconversion nanoparticle (UCNP) disk with maximum particles and limited clusters demonstrates ∼2.5 times enhanced vitamin D₂ conversion.

A ratiometric nanoprobe based on carboxylated graphitic carbon nitride nanosheets and Eu3+ for the detection of tetracyclines

A convenient and rapid method that combines a fluorescent nanoprobe based on C-g-C₃N₄-Eu³⁺ with a smartphone and test paper has been developed for the in situ detection of tetracyclines.

Rapid aqueous-phase synthesis of highly stable K0.3Bi0.7F2.4 upconversion nanocrystalline particles at low temperature

Lanthanide-doped K_0.3Bi_0.7F_2.4 nanocrystalline particles are synthesized through an ultrafast (only 1 min) and aqueous-phase chemical method at low temperature (room temperature ∼ 90 °C), which can be used as pigments for anti-counterfeiting.

Temperature-dependent upconversion luminescence multicolor tuning and temperature sensing of multifunctional β-NaYF4:Yb/Er@β-NaYF4:Yb/Tm microcrystals

Multifunctional β-NaYF₄:Yb/Er@β-NaYF₄:Yb/Tm microcrystals with simultaneous white-light emission, temperature-dependent upconversion luminescence multicolor tuning and good temperature sensitivity.

Energy transfer designing in lanthanide-doped upconversion nanoparticles

Lanthanide (Ln3+)-doped upconversion nanoparticles (UCNPs), exhibiting excellent optical properties such as long photoluminescence lifetime, narrow emission bandwidth, and low autofluorescence background, have been applied in many fields, especially in biological analysis and medical diagnostics. Despite the exciting progress, the applications of Ln3+-doped UCNPs are hindered by the small absorption cross-section and low upconversion luminescence efficiency of Ln3+. To this regard, several effective strategies associated with energy transfer designing have been proposed to modulate the upconversion luminescence properties of Ln3+ in the past few decades. In this feature article, we focus on the most recent development of optical property designing in Ln3+-doped UCNPs on the basis of energy transfer between Ln3+-Ln3+, Ln3+-dyes, and Ln3+-quantum dots. Some future efforts towards the energy transfer designing in Ln3+-doped UCNPs are also proposed.

Video-rate upconversion display from optimized lanthanide ion doped upconversion nanoparticles

Volumetric displays that create bright image points within a transparent bulk are one of the most attractive technologies in everyday life. Lanthanide ion doped upconversion nanoparticles (UCNPs) are promising luminescent nanomaterials for background free, full-colour volumetric displays of transparent bulk materials. However, video-rate display using UCNPs has been limited by their low emission intensity. Herein, we developed a video-rate upconversion display system with much enhanced brightness. The integral emission intensity of the single UCNPs was fully employed for video-rate display. It was maximized by optimizing the emitter concentration and, more importantly, by temporally synchronizing the scanning time of the excitation light to the the raised emission time of the single UCNPs. The excitation power dependent emission response and emission time decay curves were systematically characterized for the single UCNPs with various emitter concentrations from 0.5% to 6%. 1%Tm³⁺ doped UCNPs presented the highest integral emission intensity. By embedding this UCNPs into a polyvinyl acetate (PVA) film, we achieved a two-dimensional (2D) upconversion display with a frame rate of 29 Hz for 35 by 50 pixels. This work demonstrates that the temporal response as well as the integral emission intensity enable video-rate upconversion display.

Prospects on Nano-Based Platforms for Antimicrobial Photodynamic Therapy Against Oral Biofilms

Objective: This review clusters the growing field of nano-based platforms for antimicrobial photodynamic therapy (aPDT) targeting pathogenic oral biofilms and increase interactions between dental researchers and investigators in many related fields. Background data: Clinically relevant disinfection of dental tissues is difficult to achieve with aPDT alone. It has been found that limited penetrability into soft and hard dental tissues, diffusion of the photosensitizers, and the small light absorption coefficient are contributing factors. As a result, the effectiveness of aPDT is reduced in vivo applications. To overcome limitations, nanotechnology has been implied to enhance the penetration and delivery of photosensitizers to target microorganisms and increase the bactericidal effect. Materials and methods: The current literature was screened for the various platforms composed of photosensitizers functionalized with nanoparticles and their enhanced performance against oral pathogenic biofilms. Results: The evidence-based findings from the up-to-date literature were promising to control the onset and the progression of dental biofilm-triggered diseases such as dental caries, endodontic infections, and periodontal diseases. The antimicrobial effects of aPDT with nano-based platforms on oral bacterial disinfection will help to advance the design of combination strategies that increase the rate of complete and durable clinical response in oral infections. Conclusions: There is enthusiasm about the potential of nano-based platforms to treat currently out of the reach pathogenic oral biofilms. Much of the potential exists because these nano-based platforms use unique mechanisms of action that allow us to overcome the challenging of intra-oral and hard-tissue disinfection.

Artificial Atomic Vacancies Tailor Near-Infrared II Excited Multiplexing Upconversion in Core-Shell Lanthanide Nanoparticles

Epitaxial growth of an inert shell around the optical active lanthanide upconversion nanoparticles (UCNPs) is a general strategy to enhance their brightness. Yet, its potential as a tool in multiplexing emission tailoring has rarely been reported. Here, by developing the atomic vacancies into color selectivity actuators, we present an efficient strategy to achieve inert-shell-modulated multiplexing upconversion in 1540 nm activated UCNPs. Artificially generated fluoride atomic vacancies, owing to the decreased NaOH/NH₄F dosage during shell growth, reduce the coordination number of Y-F and lattice densities in the inert shell, leading to the core-engineered shell nanoparticles with distinctive emission profiles. The multicolor tailoring is independent of shell thickness and can be readily applied to Lu³⁺/Gd³⁺-based shells. The upconversion emission can be exploited to visualize in security decoding and in vivo multiplexing bioimaging. This method of regulating atomic vacancies based on the inert-shell engineering opens new insights of upconversion modulation in core-shell lanthanide nanostructures.