Synthesis and biomedical applications of functional poly(α-hydroxy acids) via ring-opening polymerization of O-carboxyanhydrides

Thorium Complexation with Aliphatic and Aromatic Hydroxycarboxylates: A Combined Experimental and Theoretical Study

Hydroxycarboxylic acids, viz., α-hydroxyisobutyric acid (HIBA) and mandelic acid (MA), have been widely employed as eluents for inner transition metal separation studies. Both extractants have identical functional groups (OH and COOH) with different side-chains. Despite their similarities in binding motifs, they show different retention behaviors for thorium and uranium in liquid chromatography. To understand the mechanism behind the trend, a detailed study on the aqueous phase interaction of thorium with both extractants is carried out by speciation, spectroscopy, and density functional theory-based calculations. Potentiometric titration experiments are carried out to reveal the stability and species formed. Electrospray ionization mass spectrometry is performed to identify the formation of different species by Th with both HIBA and MA. It is seen that for Th-HIBA and Th-MA, the dominating species are ML3 and ML4, respectively. A similar pattern observed in potentiometric speciation analysis supports the tendency of Th to form higher stoichiometric species with MA than with HIBA. The difference in the dominating species thus helps in explaining the reversal in the retention behavior of uranium and thorium in the reverse-phase liquid chromatographic separation. The results obtained are corroborated with extended X-ray absorption fine structure spectroscopic measurements and density functional theory (DFT) calculations.

Stereoselective Ring-opening Polymerization of S-Carboxyanhydrides Using Salen Aluminum Catalysts: A Route to High-Isotactic Functionalized Polythioesters

Polythioesters are important sustainable polymers with broad applications. The ring-opening polymerization (ROP) of S-Carboxyanhydrides (SCAs) can afford polythioesters with functional groups that are typically difficult to prepare by ROP of thiolactones. Typical methods involving organocatalysts, like dimethylaminopyridine (DMAP) and triethylamine (Et3 N), have been plagued by uncontrolled polymerization, including epimerization for most SCAs resulting in the loss of isotacticity. Here, we report the use of salen aluminum catalysts for the selective ROP of various SCAs without epimerization, affording functionalized polythioester with high molecular weight up to 37.6 kDa and the highest Pm value up to 0.99. Notably, the ROP of TlaSCA (SCA prepared from thiolactic acid) generates the first example of a isotactic crystalline poly(thiolactic acid), which exhibited a distinct Tm value of 152.6 °C. Effective ligand tailoring governs the binding affinity between the sulfide chain-end and the metal center, thereby maintaining the activity of organometallic catalysts and reducing the occurrence of epimerization reactions.

Synthesis of Polypeptides and Poly(α-hydroxy esters) from Aldehydes Using Strecker Synthesis

This report presents a versatile approach for the synthesis of new polypeptide and polyester-based biomaterials. The well-established Strecker reaction was utilized, with hexanal serving as the model aldehyde, to synthesize α-amino and α-hydroxy acids as monomer units for the polymer system. Following the formation of the corresponding amino and hydroxy acid monomers, they were subsequently converted to N-carboxy and O-carboxy-anhydrides. The resultant cyclic anhydride molecules were then polymerized via ring-opening polymerization to yield the corresponding polypeptides and polyesters. This report establishes a straightforward methodology for the synthesis of new polypeptide and poly(a-hydroxy acid)-based biomaterials, thereby expanding the existing library of polymers for various biomedical applications.

Postpolymerization Modification by Nucleophilic Addition to Styrenic Carbodiimides

Carbodiimides are electrophilic functional groups that react with select nucleophiles under mild conditions. However, their potential as platforms for postpolymerization modification has been relatively underexplored. We describe the synthesis and radical polymerization of a styrenic carbodiimide which undergoes rapid nucleophilic addition with primary and secondary alkyl amines under ambient conditions, even in the presence of other protic nucleophiles. The monomer is amenable to both free and controlled radical (co)polymerization, and we further demonstrate the utility of this approach by preparing covalent adaptable networks through guanylation of the styrenic carbodiimide with difunctional amines. These materials exhibit a variation in relaxation times according to both the guanidine structure and concentration, providing a facile means for tuning dynamic behavior.

Melt Polycondensation Strategy for Amide-Functionalized l-Aspartic Acid Amphiphilic Polyester Nano-assemblies and Enzyme-Responsive Drug Delivery in Cancer Cells

Aliphatic polyesters are intrinsically enzymatic-biodegradable, and there is ever-increasing demand for safe and smart next-generation biomaterials including drug delivery nano-vectors in cancer research. Using bioresource-based biodegradable polyesters is one of the elegant strategies to meet this requirement; here, we report an l-amino acid-based amide-functionalized polyester platform and explore their lysosomal enzymatic biodegradation aspects to administrate anticancer drugs in cancer cells. l-Aspartic acid was chosen and different amide-side chain-functionalized di-ester monomers were tailor-made having aromatic, aliphatic, and bio-source pendant units. Under solvent-free melt polycondensation methodology; these monomers underwent polymerization to yield high molecular weight polyesters with tunable thermal properties. PEGylated l-aspartic monomer was designed to make thermo-responsive amphiphilic polyesters. This amphiphilic polyester was self-assembled into a 140 ± 10 nm-sized spherical nanoparticle in aqueous medium, which exhibited lower critical solution temperature at 40-42 °C. The polyester nano-assemblies showed excellent encapsulation capabilities for anticancer drug doxorubicin (DOX), anti-inflammatory drug curcumin, biomarkers such as rose bengal (RB), and 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt. The amphiphilic polyester NP was found to be very stable under extracellular conditions and underwent degradation upon exposure to horse liver esterase enzyme in phosphate-buffered saline at 37 °C to release 90% of the loaded cargoes. Cytotoxicity studies in breast cancer MCF 7 and wild-type mouse embryonic fibroblasts cell lines revealed that the amphiphilic polyester was non-toxic to cell lines up to 100 μg/mL, while their drug-loaded polyester nanoparticles were able to inhibit the cancerous cell growth. Temperature-dependent cellular uptake studies further confirmed the energy-dependent endocytosis of polymer NPs across the cellular membranes. Confocal laser scanning microscopy assisted time-dependent cellular uptake analysis directly evident for the endocytosis of DOX loaded polymer NP and their internalization for biodegradation. In a nutshell, the present investigation opens up an avenue for the l-amino acid-based biodegradable polyesters from l-aspartic acids, and the proof of concept is demonstrated for drug delivery in the cancer cell line.

Biocatalytic Synthesis of Homochiral 2-Hydroxy-4-butyrolactone Derivatives by Tandem Aldol Addition and Carbonyl Reduction

Chiral 2-hydroxy acids and 2-hydroxy-4-butyrolactone derivatives are structural motifs often found in fine and commodity chemicals. Here, we report a tandem biocatalytic stereodivergent route for the preparation of these compounds using three stereoselective aldolases and two stereocomplementary ketoreductases using simple and achiral starting materials. The strategy comprises (i) aldol addition reaction of 2-oxoacids to aldehydes using two aldolases from E. coli, 3-methyl-2-oxobutanoate hydroxymethyltransferase (KPHMT _Ecoli ), 2-keto-3-deoxy-l-rhamnonate aldolase (YfaU _Ecoli ), and trans-o-hydroxybenzylidene pyruvate hydratase-aldolase from Pseudomonas putida (HBPA _Pputida ) and (ii) subsequent 2-oxogroup reduction of the aldol adduct by ketopantoate reductase from E. coli (KPR _Ecoli ) and a Δ¹-piperidine-2-carboxylate/Δ¹-pyrroline-2-carboxylate reductase from Pseudomonas syringae pv. tomato DSM 50315 (DpkA _Psyrin ) with uncovered promiscuous ketoreductase activity. A total of 29 structurally diverse compounds were prepared: both enantiomers of 2-hydroxy-4-butyrolactone (>99% ee), 21 2-hydroxy-3-substituted-4-butyrolactones with the (2R,3S), (2S,3S), (2R,3R), or (2S,3R) configuration (from 60:40 to 98:2 dr), and 6 2-hydroxy-4-substituted-4-butyrolactones with the (2S,4R) configuration (from 87:13 to 98:2 dr). Conversions of aldol adducts varied from 32 to 98%, while quantitative conversions were achieved by both ketoreductases, with global isolated yields between 20 and 45% for most of the examples. One-pot one-step cascade reactions were successfully conducted achieving isolated yields from 30 to 57%.

Sustainable Synthesis of α-Hydroxycarboxylic Acids by Manganese Catalyzed Acceptorless Dehydrogenative Coupling of Ethylene Glycol and Primary Alcohols

Herein, we report a straightforward synthesis of valuable α-hydroxycarboxylic acid molecules via an acceptorless dehydrogenative coupling of ethylene glycol and primary alcohols. A bench-stable manganese complex catalyzed the reaction, which is scalable, with the product being isolated with high yields and selectivities under mild conditions. The protocol is environmentally benign, producing water and hydrogen gas as the only byproducts. Methanol can also be used as a C1 source for producing the platform molecule lactic acid, with a high turnover of >10⁴ . The methodology was also used to functionalize alcohols derived from natural products and fatty acids. Furthermore, it was applied for synthesizing α-amino acid, α-thiocarboxylic acid, and several drugs and bioactive molecules, including endogenous metabolites, Danshensu, Enalapril, Lisinopril, and Rosmarinic acid. Preliminary mechanistic studies were performed to shed light on the mechanism involved in the reaction.

A TLR7-nanoparticle adjuvant promotes a broad immune response against heterologous strains of influenza and SARS-CoV-2

The ideal vaccine against viruses such as influenza and SARS-CoV-2 must provide a robust, durable and broad immune protection against multiple viral variants. However, antibody responses to current vaccines often lack robust cross-reactivity. Here we describe a polymeric Toll-like receptor 7 agonist nanoparticle (TLR7-NP) adjuvant, which enhances lymph node targeting, and leads to persistent activation of immune cells and broad immune responses. When mixed with alum-adsorbed antigens, this TLR7-NP adjuvant elicits cross-reactive antibodies for both dominant and subdominant epitopes and antigen-specific CD8+ T-cell responses in mice. This TLR7-NP-adjuvanted influenza subunit vaccine successfully protects mice against viral challenge of a different strain. This strategy also enhances the antibody response to a SARS-CoV-2 subunit vaccine against multiple viral variants that have emerged. Moreover, this TLR7-NP augments antigen-specific responses in human tonsil organoids. Overall, we describe a nanoparticle adjuvant to improve immune responses to viral antigens, with promising implications for developing broadly protective vaccines.

Recent Advances in Sequence-Controlled Ring-Opening Copolymerizations of Monomer Mixtures

Transforming renewable resources into functional and degradable polymers is driven by the ever-increasing demand to replace unsustainable polyolefins. However, the utility of many degradable homopolymers remains limited due to their inferior properties compared to commodity polyolefins. Therefore, the synthesis of sequence-defined copolymers from one-pot monomer mixtures is not only conceptually appealing in chemistry, but also economically attractive by maximizing materials usage and improving polymers' performances. Among many polymerization strategies, ring-opening (co)polymerization of cyclic monomers enables efficient access to degradable polymers with high control on molecular weights and molecular weight distributions. Herein, we highlight recent advances in achieving one-pot, sequence-controlled polymerizations of cyclic monomer mixtures using a single catalytic system that combines multiple catalytic cycles. The scopes of cyclic monomers, catalysts, and polymerization mechanisms are presented for this type of sequence-controlled ring-opening copolymerization.

Cefonicid Benzathine Salt: A Convenient, Lean, and High-Performance Protocol to Make an Old Cephalosporin Shine

Cefonicid is a second-generation cephalosporin sold under the brand name Sintocef™. It is an injectable drug obtained via a freeze-drying process and is also available for oral preparations. The high-quality standard required is very challenging to satisfy, and current production protocols are characterized by steps that are lengthy and cumbersome, making the product unattractive for the international market. Industrial R&D is constantly working on the process optimization for API synthesis, with the aim of increasing productivity and decreasing production costs and waste. We herein report a new and efficient method for the synthesis of the cefonicid benzathine salt that provides a good yield and high product stability. The double-nucleophilic and lipophilic nature of N',N″-dibenzylethylene diacetate enables the deformylation of the OH-protected group on the mandelic moiety and also enables product crystallization to occur. We demonstrate that the formyl group in the peculiar position has high reactivity, promoting an amidation reaction that deprotects a hydroxy group and generates a new C-N bond in the reaction by-product. Several amines and OH-protected groups have been studied, but none were able to replicate the excellent results of benzathine diacetate.

Switchable Polymerization Organocatalysis: From Monomer Mixtures to Block Copolymers

One-pot production of sequence-controlled block copolymer from mixed monomers is a crucial but rarely reached goal. Using a switchable Lewis-pair organocatalyst, we have accomplished sequence-selective polymerization from a mixture of O-carboxyanhydride (OCA) and epoxide. Polymerization of the OCA monomer occurs first and exclusively because of its exceedingly high polymerizability. When OCA is fully consumed, alternating copolymerization of epoxide and CO₂ liberated in OCA polymerization is triggered from the termini of the first block. The two polymerizations thus occur in tandem, both in chemoselective fashion, so that a sequence-controlled block polymer with up to 99 % CO₂ conversion is furnished in this one-pot protocol. Calculations and experimental results demonstrate a chemoselective and cooperative mechanism, where the high polymerizability of the OCA monomers guarantees exquisite sequence selectivity and the cooperative decarboxylation partly arose from the stabilization effect by triethylborane, which facilitates the smooth transformation of the chain end from carbonate to alkoxide.

Ring-opening polymerization-induced self-assembly (ROPISA) of salicylic acid o-carboxyanhydride

Here is the first report on polyester-based nanocarriers fabricated via the ring-opening polymerization-induced self-assembly (ROPISA) of salicylic acid o-carboxyanhydride (SAOCA). This ROPISA process affords well-defined diblock copolymers that interestingly form an original cylindrical morphology.

Monomer Controlled Switchable Copolymerization: A Feasible Route for the Functionalization of Poly(lactide)

Switchable polymerization is an attractive strategy to enable the sequential selectivity of multi-block polyesters. Besides, these well-defined multi-block polyesters could enable further modification for wider applications. Herein, based on the reversible insertion of CO₂ by Salen-Mn^III , a new monomer controlled self-switchable polymerization route was developed. Chemoselective ring opening copolymerization of O-carboxyanhydrides (OCAs) and lactide (LA) was explored without cocatalyst. The sequential conversion of OCAs and LA into the polymer chain could form multi-block polyesters. Based on this strategy, a series of multi-block polyesters with different pendant groups were synthesized. Furthermore, by modifying the propargyl-containing copolymers with quaternary ammonium groups, we have realized antibacterial functionalization of PLA. These results imply the potential application of this strategy for the fabrication of functional polymers for biomedical applications.

Polymeric Nanoreactors as Emerging Nanoplatforms for Cancer Precise Nanomedicine

How to precisely detect and effectively cure cancer which is defined as precise nanomedicine has drawn great attention worldwide. Polymeric nanoreactors which can in situ catalyze inert species into activated ones, can greatly increase imaging quality and enhance therapeutic effects along with decreased background interference and reduced serious side effects. After a brief introduction, the design and preparation of polymeric nanoreactors are discussed from the following aspects, that is, solvent-switch, pH-tuning, film rehydration, hard template, electrostatic interaction, and polymerization-induced self-assembly (PISA). Subsequently, the biomedical applications of these nanoreactors in the fields of cancer imaging, cancer therapy, and cancer theranostics are highlighted. The last but not least, conclusions and future perspectives about polymeric nanoreactors are given. It is believed that polymeric nanoreactors can bring a great opportunity for future fabrication and clinical translation of precise nanomedicine.

Photocatalyst-independent photoredox ring-opening polymerization of O-carboxyanhydrides: stereocontrol and mechanism

Photoredox ring-opening polymerization of O-carboxyanhydrides allows for the synthesis of polyesters with precisely controlled molecular weights, molecular weight distributions, and tacticities. While powerful, obviating the use of precious metal-based photocatalysts would be attractive from the perspective of simplifying the protocol. Herein, we report the Co and Zn catalysts that are activated by external light to mediate efficient ring-opening polymerization of O-carboxyanhydrides, without the use of exogenous precious metal-based photocatalysts. Our methods allow for the synthesis of isotactic polyesters with high molecular weights (>200 kDa) and narrow molecular weight distributions (M w/M n < 1.1). Mechanistic studies indicate that light activates the oxidative status of a CoIII intermediate that is generated from the regioselective ring-opening of the O-carboxyanhydride. We also demonstrate that the use of Zn or Hf complexes together with Co can allow for stereoselective photoredox ring-opening polymerizations of multiple racemic O-carboxyanhydrides to synthesize syndiotactic and stereoblock copolymers, which vary widely in their glass transition temperatures.

Rapid, controlled ring-opening polymerization of salicylic acid o-carboxyanhydride for poly(salicylate) synthesis

A fast synthesis pathway of poly(salicylate) in mild conditions was explored, in which the combination of Lewis base and alcohol enables salicylic acid o-carboxyanhydride polymerize in seconds to afford well-defined hompolymers with high Tg.

Strategies for the synthesis of block copolymers with biodegradable polyester segments

Oxygenated block copolymers with biodegradable polyester segments can be prepared in one-pot through sequential or simultaneous addition of monomers. This review highlights the state of the art in this area.

Synthesis of Sustainable Polyesters via Organocatalytic Ring-Opening Polymerization of O-carboxyanhydrides: Advances and Perspectives

Sustainable polyesters can be furnished via ring-opening polymerization (ROP) of O-carboxyanhydrides (OCAs). Various catalysts, especially metal-based catalysts, are devised to achieve controlled ROP of OCAs. In the following mini review, the recent progress on the organocatalytic ROP of OCAs, including the usage of thiourea-based bifunctional single-molecule organocatalysts for eliminating epimerization in OCAs polymerization is summarized. Moreover, the future development of the organocatalytic ROP of OCAs for the synthesis of sustainable polyesters will be discussed.

Functionalized Polyesters via Stereoselective Electrochemical Ring-Opening Polymerization of O-Carboxyanhydrides

Ring-opening polymerization is used to prepare polyesters with precisely controlled molecular weights, molecular weight distributions, and tacticities. Herein, we report a Co/Zn catalytic system that can be activated by an electrical current to mediate efficient ring-opening polymerization of enantiopure O-carboxyanhydrides, allowing for the synthesis of isotactic functionalized polyesters with high molecular weights (>140 kDa) and narrow molecular weight distributions (M_w/M_n < 1.1). We also demonstrate that these catalysts can be used for stereoselective ring-opening polymerization of racemic O-carboxyanhydrides to synthesize syndiotactic or stereoblock copolymers with different glass transition temperatures compared with their atactic counterparts.

Synthesis of macrocyclic poly(α-hydroxyl acids) via DABCO-mediated ROP of O-carboxylanhydrides derived from l-phenylalanine even in the presence of an alcohol

On exploration of a catalytic system including simple 1,4-diazabicyclo-[2.2.2]octane (DABCO), triethylboron (TEB) and benzylalcohol (BnOH), a new pathway to achieve cyclic PAHAs was developed via ROP of OCAs.

Poly(hydroxy acids) derived from the self-condensation of hydroxy acids: from polymerization to end-of-life options

Poly(hydroxy acids) derived from the self-condensation of hydroxy acid are biodegradable and can be fully recycled in a Circular Economy approach.

Biodegradable Poly(Acetonide Gluconic Acid) for Controlled Drug Delivery

We report here on the synthesis, characterization, degradation, and drug release of acetal-protected gluconic acid-based poly(α-hydroxy ester). This polyester was synthesized by ring-opening polymerization of O-carboxyanhydride of acetal-protected gluconic acid. The polymer undergoes hydrolytic degradation under mild acidic media, whereas minimal degradation takes place under physiological pH. Under acidic conditions, the acetal-protecting groups are hydrolyzed, resulting in a water-soluble polyester with saccharide side chains that erodes from the surface, leaving the bulk of the polymer matrix intact. At pH 3.5, zero-order kinetics was maintained for 50 days accounting for ∼75% drug release. These biodegradable, pH-responsive, sustained zero-order release kinetics of the polymer have application as drug carriers for oral drug delivery or medical implants or also for nonmedical applications.

Understanding the ring-opening polymerisation of dioxolanones

Eliminating small molecules from dioxolane rings affords isotactic poly(mandelic acid), with competing chain transfer overcome through dynamic vacuum polymerisation.

Highly isoselective ring-opening polymerization of rac-O-carboxyanhydrides using a zinc alkoxide initiator

A highly isoselective ROP system using just a zinc alkoxide as an initiator for the isoselective ROP of OCAs with the best P_m value of 0.97 at −70 °C.

Simple Lewis pairs of zinc salts and organobases as bifunctional catalysts for controlled ring-opening polymerization of O-carboxyanhydrides

Simple Lewis pairs consisting of organobases and zinc salts were explored to promote ring-opening polymerization of phenyl O-carboxyanhydride via bifunctional catalysis, producing well-defined poly(α-hydroxyalkanoic acid)s with good isotacticity (P_m = 0.88).

Trifluoromethyl-functionalized poly(lactic acid): a fluoropolyester designed for blood contact applications

Fluorinated polymers are strong candidates for development of new cardiovascular medical devices, due to their lower thrombogenicity as compared to other polymers used for cardiovascular implants.

Living Ring-Opening Polymerization of O-Carboxyanhydrides: The Search for Catalysts

Biodegradable poly(α-hydroxy acids) can be synthesized by means of ring-opening polymerization (ROP) of O-carboxyanhydrides (OCAs). Numerous catalysts have been developed to control the living polymerization of OCAs. Here we review the rationale for the use of OCA, the desirable features for and important attributes of catalysts for the ROP of OCAs, and specific examples that have been developed.