Smart nanomaterials inspired by biology: dynamic assembly of error-free nanomaterials in response to multiple chemical and biological stimuli

RNA-Cleaving DNAzyme-Based Amplification Strategies for Biosensing and Therapy

Since their first discovery in 1994, DNAzymes have been extensively applied in biosensing and therapy that act as recognition elements and signal generators with the outstanding properties of good stability, simple synthesis, and high sensitivity. One subset, RNA-cleaving DNAzymes, is widely employed for diverse applications, including as reporters capable of transmitting detectable signals. In this review, the recent advances of RNA-cleaving DNAzyme-based amplification strategies in scaled-up biosensing are focused, the application in diagnosis and disease treatment are also discussed. Two major types of RNA-cleaving DNAzyme-based amplification strategies are highlighted, namely direct response amplification strategies and combinational response amplification strategies. The direct response amplification strategies refer to those based on novel designed single-stranded DNAzyme, and the combinational response amplification strategies mainly include two-part assembled DNAzyme, cascade reactions, CHA/HCR/RCA, DNA walker, CRISPR-Cas12a and aptamer. Finally, the current status of DNAzymes, the challenges, and the prospects of DNAzyme-based biosensors are presented.

Overcoming Major Barriers to Developing Successful Sensors for Practical Applications Using Functional Nucleic Acids

For many years, numerous efforts have been focused on the development of sensitive, selective, and practical sensors for environmental monitoring, food safety, and medical diagnostic applications. However, the transition from innovative research to commercial success is relatively sparse. In this review, we identify four scientific barriers and one technical barrier to developing successful sensors for practical applications, including the lack of general methods to (a) generate receptors for a wide range of targets, (b) improve sensor selectivity to overcome interferences, (c) transduce the selective binding to different optical, electrochemical, and other signals, and (d) tune dynamic range to match thresholds of detection required for different targets; and the costly development of a new device. We then summarize solutions to overcome these barriers using sensors based on functional nucleic acids that include DNAzymes, aptamers, and aptazymes and how these sensors are coupled to widely available measurement devices to expand their capabilities and lower the barrier for their practical applications in the field and point-of-care settings.

A Comprehensive Review on Water Quality Monitoring Devices: Materials Advances, Current Status, and Future Perspective

Water quality monitoring has become more critical in recent years to ensure the availability of clean and safe water from natural aquifers and to understand the evolution of water contaminants across time and space. The conventional water monitoring techniques comprise of sample collection, preservation, preparation, tailed by laboratory testing and analysis with cumbersome wet chemical routes and expensive instrumentation. Despite the high accuracy of these methods, the high testing costs, laborious procedures, and maintenance associated with them don't make them lucrative for end end-users and field testing. As the participation of ultimate stakeholders, that is, common man for water quality and quantity can play a pivotal role in ensuring the sustainability of our aquifers, thus it is essential to develop and deploy portable and user-friendly technical systems for monitoring water sources in real-time or on-site. The present review emphasizes here on possible approaches including optical (absorbance, fluorescence, colorimetric, X-ray fluorescence, chemiluminescence), electrochemical (ASV, CSV, CV, EIS, and chronoamperometry), electrical, biological, and surface-sensing (SPR and SERS), as candidates for developing such platforms. The existing developments, their success, and bottlenecks are discussed in terms of various attributes of water to escalate the essentiality of water quality devices development meeting ASSURED criterion for societal usage. These platforms are also analyzed in terms of their market potential, advancements required from material science aspects, and possible integration with IoT solutions in alignment with Industry 4.0 for environmental application.

DNA Assembly-Based Stimuli-Responsive Systems

Stimuli-responsive designs with exogenous stimuli enable remote and reversible control of DNA nanostructures, which break many limitations of static nanostructures and inspired development of dynamic DNA nanotechnology. Moreover, the introduction of various types of organic molecules, polymers, chemical bonds, and chemical reactions with stimuli-responsive properties development has greatly expand the application scope of dynamic DNA nanotechnology. Here, DNA assembly-based stimuli-responsive systems are reviewed, with the focus on response units and mechanisms that depend on different exogenous stimuli (DNA strand, pH, light, temperature, electricity, metal ions, etc.), and their applications in fields of nanofabrication (DNA architectures, hybrid architectures, nanomachines, and constitutional dynamic networks) and biomedical research (biosensing, bioimaging, therapeutics, and theranostics) are discussed. Finally, the opportunities and challenges for DNA assembly-based stimuli-responsive systems are overviewed and discussed.

Functional Nucleic Acid Nanomaterials: Development, Properties, and Applications

Functional nucleic acid (FNA) nanotechnology is an interdisciplinary field between nucleic acid biochemistry and nanotechnology that focuses on the study of interactions between FNAs and nanomaterials and explores the particular advantages and applications of FNA nanomaterials. With the goal of building the next-generation biomaterials that combine the advantages of FNAs and nanomaterials, the interactions between FNAs and nanomaterials as well as FNA self-assembly technologies have established themselves as hot research areas, where the target recognition, response, and self-assembly ability, combined with the plasmon properties, stability, stimuli-response, and delivery potential of various nanomaterials can give rise to a variety of novel fascinating applications. As research on the structural and functional group features of FNAs and nanomaterials rapidly develops, many laboratories have reported numerous methods to construct FNA nanomaterials. In this Review, we first introduce some widely used FNAs and nanomaterials along with their classification, structure, and application features. Then we discuss the most successful methods employing FNAs and nanomaterials as elements for creating advanced FNA nanomaterials. Finally, we review the extensive applications of FNA nanomaterials in bioimaging, biosensing, biomedicine, and other important fields, with their own advantages and drawbacks, and provide our perspective about the issues and developing trends in FNA nanotechnology.

Polarity control of DNA adsorption enabling the surface functionalization of CuO nanozymes for targeted tumor therapy

Nanomaterials with intrinsic catalytic activities (nanozyme) have drawn broad attention for various biomedical applications, with peroxidase-mimic nanozymes particularly attractive for cancer therapy due to their capability to catalyze the conversion of tumor-abundant H₂O₂ into more toxic hydroxyl radicals (˙OH) for effective tumor ablation. However, the facile surface modification of nanozymes for tumor-targeted delivery while retaining their catalytic activity remains a challenge. Here, we report an approach to functionalize the CuO nanozyme with DNA to enable targeted delivery and selective tumor destruction. We systematically studied the adsorption of DNA on the CuO surface, with special attention paid to the catalytic activity and DNA adsorption stability in the presence of various biological ligands. After gaining a fundamental understanding, a di-block DNA sequence was designed for adsorption on to the CuO surface, which allowed stable adsorption during in vivo circulation, passive accumulation into the tumor tissue, and the specific recognition of tumor cells, resulting in significant nanocatalytic tumor suppression in tumor xenograft mice models with no noticeable cytotoxicity. This work paves a way for the rational design of DNA-modified nanozymes for catalytic tumor therapy, and fundamentally, provides a new insight into the biointerface chemistry of CuO with DNA.

Gold nanoparticles-biomembrane interactions: From fundamental to simulation

Gold Nanoparticles (AuNPs) are a class of promising nanomaterial for biomedical applications ranging from bioimaging, drug delivery to phototherapy because of their biocompatibility, easily tunable size and shape, and versatile surface modifications. In recent years, the rapid development of AuNPs in nanomedicine has made it imperative to seek fundamental understanding on their nano-biointeractions to minimize adverse effects and improve targeting/imaging efficiency. In this review, we summarize the different pathways of NPs-biomembrane interactions with a focus on AuNPs, follow by an analysis on how the physiochemical properties (size, surface charge, shape, surface ligands, and hydrophobicity etc.) of AuNPs can be involved in the mechanisms of cellular uptake. Finally, some recent advances on simulation modelling of AuNPs-biomembrane interactions and a brief outlook in the field are discussed.

Functionalization of Gold Nanoparticles by Inorganic Entities

The great affinity of gold surface for numerous electron-donating groups has largely contributed to the rapid development of functionalized gold nanoparticles (Au-NPs). In the last years, a new subclass of nanocomposite has emerged, based on the association of inorganic molecular entities (IME) with Au-NPs. This highly extended and diversified subclass was promoted by the synergy between the intrinsic properties of the shell and the gold core. This review-divided into four main parts-focuses on an introductory section of the basic notions related to the stabilization of gold nanoparticles and defines in a second part the key role played by the functionalizing agent. Then, we present a wide range of inorganic molecular entities used to prepare these nanocomposites (NCs). In particular, we focus on four different types of inorganic systems, their topologies, and their current applications. Finally, the most recent applications are described before an overview of this new emerging field of research.

Lateral flow assays for Ochratoxin A using metal nanoparticles: comparison of "adsorption-desorption" approach to linkage inversion assembled nano-aptasensors (LIANA)

Nano-aptamer probes were prepared and used in lateral flow colorimetric assays for the detection of Ochratoxin A (OTA). In this study, two approaches were examined using 5'-biotin-modified OTA aptamers and silver or gold nanoparticles (AgNP or AuNP). The first method used an "adsorption-desorption" approach wherein aptamers were adsorbed onto the metal nanoparticle surface. Upon the addition of OTA, the aptamer binds specifically to the target, releasing the NPs. The above solutions were applied on a lateral flow assay (LFA) and a detection limit of 6.3 nM was achieved with both metal nanoparticles. The second method used a labelled approach based on Linkage Inversion Assembled Nano-Aptasensors (LIANAs) using a DNA linker containing a 5'-5' linkage inversion (5'-5' linker) to assemble biotinylated aptamer-functionalized metal nanoparticles. In the presence of target, OTA specifically binds with its aptamer leading to release of the linker and disassembly of LIANA aggregates into dispersed nanoparticles. The same solutions were applied in LFA format and the lowest detection limit of 0.63 nM was achieved. The results indicated that the LIANA-based LFA strips were more sensitive than the "adsoprtion-desorption" LFAs. Both lateral flow assays are inexpensive, simple, and rapid to perform and produces results visible to the naked-eye.

Controlling the Catalytic and Optical Properties of Aggregated Nanoparticles or Semiconductor Quantum Dots Using DNA-Based Constitutional Dynamic Networks

Nucleic acid-based constitutional dynamic networks (CDNs) attract growing interest as a means to mimic complex biological networks. The triggered stabilization of the CDNs allows the dictated guided reversible reconfiguration and re-equilibration of the CDNs to other CDN configurations, where some of the constituents are up-regulated, while other constituents are down-regulated. Although substantial progress in controlling the adaptive dynamic control of the compositions of networks by means of auxiliary triggers was demonstrated, the use of CDNs as active ensembles for controlling chemical functionalities is still a challenge. We report on the assembly of signal-triggered CDN systems that guide the switchable aggregation of Au nanoparticles (NPs), thereby controlling their plasmonic properties and their catalytic functions (Au NPs-catalyzed oxidation of l-DOPA to dopachrome). In addition, we demonstrate that the triggered and orthogonal up-regulation and down-regulation of the constituents of the CDNs leads to the dictated aggregation of different-sized CdSe/ZnS quantum dots (QDs), cross-linked by K⁺-ion-stabilized G-quadruplex units. The incorporation of hemin into the G-quadruplex cross-linking units yields horseradish peroxidase-mimicking DNAzyme units that catalyze the generation of chemiluminescence via the oxidation of luminol by H₂O₂. The resulting chemiluminescence stimulates the chemiluminescence resonance energy transfer (CRET) process to the QDs, resulting in the luminescence of the two-sized QDs. By the application of appropriate triggers, the CDN-dictated up-regulation and down-regulation of the different-sized QDs aggregates are demonstrated, and the control over the photophysical functions of the different-sized QDs, by means of the CDNs, is highlighted.

Bioorthogonal DNA Adsorption on Polydopamine Nanoparticles Mediated by Metal Coordination for Highly Robust Sensing in Serum and Living Cells

DNA-functionalized nanomaterials, such as various 2D materials, metal oxides, and gold nanoparticles, have been extensively explored as biosensors. However, their practical applications for selective sensing and imaging in biological samples remain challenging due to interference from the sample matrix. Bioorthogonal chemistry has allowed specific reactions in cells, and we want to employ this concept to design nanomaterials that can selectively adsorb DNA but not proteins or other abundant biomolecules. In this work, DNA oligonucleotides were found to be adsorbed on polydopamine nanoparticles (PDANs) via polyvalent metal-mediated coordination, and such adsorption bioorthogonally resisted DNA displacement by various biological ligands, showing better performance compared to graphene oxide and metal oxide nanoparticles for DNA detection. Using DNA/PDANs as biosensors, a detection limit of <1 nM target DNA was achieved in serum and other biological samples, and imaging of cancer-related microRNA in cells was demonstrated. The DNA binding mechanism on PDAN was further studied by ligand displacement experiments and X-ray photoelectron spectroscopy characterization, which demonstrated the critical role of polyvalent metal ions to bridge DNA with PDANs. This work provides fundamental insights into the biointerface science of PDANs with DNA, which can benefit applications in biosensor design, directed assembly of nanomaterials, bioimaging, and drug delivery.

DNA-Encoded Morphological Evolution of Bimetallic Pd@Au Core-shell Nanoparticles from a High-indexed Core

DNA-mediated synthesis of nanoparticles with different morphologies has proven to be a powerful method to synthesize and access many exclusive shapes and surface properties. While previous studies employ seeds that contain relatively low-energy facets, such as a simple cubic palladium seed in the synthesis of Pd-Au bimetallic nanoparticles, few studies have investigated whether DNA molecules can still exert their influence when the synthesis uses a seed that contains high-energy facets. Seeds that are enclosed by such high-energy facets or sites are known to act as easy nucleation sites in nanoparticles growth and could potentially suppress the effect of DNA. To answer this question, we herein report DNA-encoded control of morphological evolution of bimetallic Pd@Au core-shell nanoparticles from a concave palladium nanocube seed that contains high indexed facets. Based on detailed spectroscopic and SEM studies of time-dependent growth of the bimetallic nanoparticles, we found that each of 10-mer DNA molecules (T10, G10, C10 and A10) has a unique way of interacting with both the seed's surface and the precursor. Among them, the most important factor is the binding affinity of the nucleobase to the Pd surface, with the A10 possessing the highest binding affinity and thus capable of stabilizing the seed's high energy surfaces. Furthermore, for bases with lower binding affinity (T10, G10 and C10) than A10, the growth is completely dictated by the seed's surface energy initially, but the later growth can still be influenced by the different DNA sequences, resulting in four unique morphologically different Pd@Au bimetallic nanoparticles. The effect of these DNA molecules with medium binding affinity can only be observed when there is more deposition of Au. Based on the above results, a scheme for the DNA controlled growth is proposed. Together these results have provided insights into factors governing DNA-mediated growth of core-shell structures using seeds with high-energy sites, and the insights can readily be applied to other bimetallic systems that adopt seed-mediated synthesis.

Fluorescent DNA Probing Nanoscale MnO2: Adsorption, Dissolution by Thiol, and Nanozyme Activity

Manganese dioxide (MnO₂) is an interesting material due to its excellent biocompatibility and magnetic properties. Adsorption of DNA to MnO₂ is potentially of interest for drug delivery and sensing applications. However, little fundamental understanding is known about their interactions. In this work, carboxyfluorescein (FAM)-labeled DNA oligonucleotides were used to explore the effect of salt concentration, pH, and DNA sequence and length for adsorption by MnO₂, and comparisons were made with graphene oxide (GO). The DNA desorbs from MnO₂ by free inorganic phosphate, while it desorbs from GO by adenosine and urea. Therefore, DNA is mainly adsorbed on MnO₂ through its phosphate backbone, and DNA has a stronger affinity on MnO₂ than on GO based on a salt-shock assay. At the same time, DNA was used to study the effect of thiol containing compounds on the dissolution of MnO₂. Adsorbed DNA was released from MnO₂ after its dissolution by thiol, but not from other metal oxides with lower solubility such as CeO₂, TiO₂, and Fe₃O₄. DNA-functionalized MnO₂ was then used for detecting glutathione (GSH) with a detection limit of 383 nM. Finally, DNA was found to inhibit the peroxidase-like activity of MnO₂. This study has offered many fundamental insights into the interaction between MnO₂ and two important biomolecules: DNA and thiol-containing compounds.

Two Completely Different Mechanisms for Highly Specific Na+ Recognition by DNAzymes

Our view of the interaction between Na⁺ and nucleic acids was changed by a few recently discovered Na⁺ -specific RNA-cleaving DNAzymes. In addition to nonspecific electrostatic interactions, highly specific recognition is also possible. Herein, two such DNAzymes, named EtNa and Ce13d, are compared to elucidate their mechanisms of Na⁺ binding. Mutation studies indicate that they have different sequence requirements. Phosphorothioate (PS) substitution at the scissile phosphate drops the activity of EtNa 140-fold, and it cannot be rescued by thiophilic Cd²⁺ or Mn²⁺ , whereas the activity of PS-modified Ce13d can be rescued. Na⁺ -dependent activity assays indicate that two Na⁺ ions bind cooperatively in EtNa, and each Na⁺ likely interacts with a nonbridging oxygen atom in the scissile phosphate, whereas Ce13d binds only one Na⁺ ion in a well-defined Na⁺ aptamer, and this Na⁺ ion does not directly interact with the scissile phosphate. Both DNAzymes display a normal pH-rate profile, with a single deprotonation reaction required for catalysis. For EtNa, Na⁺ fails to protect the conserved nucleotides from dimethyl sulfate attack, and no specific Na⁺ binding is detected by 2-aminopurine fluorescence, both of which are different from those observed for Ce13d. This work suggests that EtNa binds Na⁺ mainly through its scissile phosphate without significant involvement of the nucleotides in the enzyme strand, whereas Ce13d has a well-defined aptamer for Na⁺ binding. Therefore, DNA has at least two distinct ways to achieve highly selective Na⁺ binding.

Photo-Switchable Self-Assemblies Based on Thymine-Containing Bolaamphiphiles

The photoswitching of photosensitive bolaamphiphiles based on thymine was investigated. Topochemical principles were applied to create light-responsive supra-amphiphiles by the utilisation of dynamic covalent bonds created by the photo-dimerisation of a DNA base, thymine. In order to induce the photo-dimerisation of thymine, two bolaamphiphilic molecules were designed and synthesised to meet the required [2 π+2 π] photo-cycloaddition conditions. The amphiphiles were synthesised with different spacers and their photo-reversibility and morphologies were studied by using UV/Vis, NMR and infrared spectroscopy, rheometry, dynamic light scattering and transmission electron microscopy.

Artificial Base zT as Functional "Element" for Constructing Photoresponsive DNA Nanomolecules

In contrast to small molecules, DNA and RNA macromolecules can be accurately formulated with base "elements" abbreviated as A, T, U, C, and G. However, the development of functionally artificial bases can result in the generation of new biomaterials with unique properties and applications. Therefore, we herein report the design and synthesis of a photoresponsive base as a new functional or molecular "element" for constructing DNA nanomolecules. The new base is made by fusion of an azobenzene with a natural T base (zT). zT, a new molecular element, is not only the most size-expanded T analogue but also a photoresponsive base capable of specific self-assembly through hydrogen bonding. Our results showed that stable and selective self-assembly of double-stranded DNAs occurred through zT-A base pairing, but it could still be efficiently dissociated by light irradiation. The photoresponsive DNA bases will provide the versatility required for constructing desired DNA nanomolecules and nanodevices.

A Silver-Specific DNAzyme with a New Silver Aptamer and Salt-Promoted Activity

Most RNA-cleaving DNAzymes require a metal ion to interact with the scissile phosphate for activity. Therefore, few unmodified DNAzymes work with thiophilic metals because of their low affinity for phosphate. Recently, an Ag⁺-specific Ag10c DNAzyme was reported via in vitro selection. Herein, Ag10c is characterized to rationalize the role of the strongly thiophilic Ag⁺. Systematic mutation studies indicate that Ag10c is a highly conserved DNAzyme and its Ag⁺ binding is unrelated to C-Ag⁺-C interaction. Its activity is enhanced by increasing Na⁺ concentrations in buffer. At the same metal concentration, activity decreases in the following order: Li⁺ > Na⁺ > K⁺. Ag10c binds one Na⁺ ion and two Ag⁺ ions for catalysis. The pH-rate profile has a slope of ∼1, indicating a single deprotonation step. Phosphorothioate substitution at the scissile phosphate suggests that Na⁺ interacts with the pro-R_p oxygen of the phosphate, and dimethyl sulfate footprinting indicates that the DNAzyme loop is a silver aptamer binding two Ag⁺ ions. Therefore, Ag⁺ exerts its function allosterically, while the scissile phosphate interacts with Na⁺, Li⁺, Na⁺, or Mg²⁺. This work suggests the possibility of isolating thiophilic metal aptamers based on DNAzyme selection, and it also demonstrates a new Ag⁺ aptamer.

Thermo- and pH-Responsive, Coacervate-Forming Hyperbranched Poly(β-amino ester)s for Selective Cell Binding

We report a new type of thermo- and pH-responsive, coacervate-forming highly degradable polymer-hyperbranched poly(β-amino esters) (HPAEs) and its selective cell binding behaviors. The HPAEs were synthesized from 5-amino-1-pentanol (S5) and trimethylolpropane ethoxylate triacrylate (TMPETA) via an A2+B3 type Michael addition. The existence of multiple hydrogen bond pairs as well as tertiary amines makes the S5-TMPETA polymers manifest temperature- and pH-dependent phase transition. By varying the length of the ethylene glycol (EG) spacers in the TMPETA, polymer molecular weight, concentration, and pH value, the phase transition of the S5-TMPETA can be easily tuned in aqueous and buffer solutions, as evidenced by UV-vis spectroscopy and DLS measurements. Especially, the S5-TMPETA prepared from S5 and trimethylolpropane ethoxylate triacrylate 692 (S5-TMPETA692) shows a lower critical solution temperature (LCST) around 33 °C, above which the S5-TMPTEA can form coacervate particles able to encapsulate functional molecules effectively. Importantly, when incubation with HeLa cells, the S5-TMPTETA692 exhibits a temperature- and pH-responsive selective cell binding behaviors. In addition, the S5-TMPETA are highly hydrolyzable and elicit negligible cytotoxicity. This new type of "smart" polymer should find use in a variety of biomedical applications.

A plasmonic multi-logic gate platform based on sequence-specific binding of estrogen receptors and gold nanorods

A hybrid system made of gold nanorods (AuNRs) and double-stranded DNA (dsDNA) is used to build a versatile multi-logic gate platform, capable of performing six different logic operations. The sequence-specific binding of transcription factors to the DNA drives the optical response of the design.

Integrating Deoxyribozymes into Colorimetric Sensing Platforms

Biosensors are analytical devices that have found a variety of applications in medical diagnostics, food quality control, environmental monitoring and biodefense. In recent years, functional nucleic acids, such as aptamers and nucleic acid enzymes, have shown great potential in biosensor development due to their excellent ability in target recognition and catalysis. Deoxyribozymes (or DNAzymes) are single-stranded DNA molecules with catalytic activity and can be isolated to recognize a wide range of analytes through the process of in vitro selection. By using various signal transduction mechanisms, DNAzymes can be engineered into fluorescent, colorimetric, electrochemical and chemiluminescent biosensors. Among them, colorimetric sensors represent an attractive option as the signal can be easily detected by the naked eye. This reduces reliance on complex and expensive equipment. In this review, we will discuss the recent progress in the development of colorimetric biosensors that make use of DNAzymes and the prospect of employing these sensors in a range of chemical and biological applications.

Reversible and Precise Self-Assembly of Janus Metal-Organosilica Nanoparticles through a Linker-Free Approach

Reversible self-assembly of nanoparticles into ordered structures is essential for both fundamental study and practical applications. Although extensive work has been conducted, the demand for simple, cheap, reversible, and versatile ordering methods is still a central issue in current nanoscience and nanotechnology. Here we report a reversible and precise self-assembly of nanoparticles through a linker-free and fast approach by manipulating the interparticle forces, e.g., van der Waals (VDW) force and electrostatic force. Because VDW force is nondirectional, an oriented interaction is achieved to induce the directional binding of nanoparticles utilizing the Janus nanostructure. An effective sol-gel approach has been developed to synthesize metal-organosilica Janus nanoparticles. Dimers and trimers can be obtained by tuning the steric hindrance. After assembly, "hot-spots" can be generated between adjacent nanoparticles, and dramatic enhancement has been observed in surface-enhanced Raman scattering. The present strategy overcomes several limitations of existing approaches and allows the controlled assembly of small particles into various structures.

Catalytic Hairpin Assembly Actuated DNA Nanotweezer for Logic Gate Building and Sensitive Enzyme-Free Biosensing of MicroRNAs

A target-switched DNA nanotweezer is designed for AND logic gate operation and enzyme-free detection of microRNAs (miRNAs) by catalytic hairpin assembly (CHA) and proximity-dependent DNAzyme formation. The double crossover motif-based nanotweezer consists of an arched structure as the set strand for target inputs and two split G-rich DNAs at the termini of two arms for signal output. Upon a CHA, a small amount of binary target inputs can switch numerous open nanotweezers to a closed state, which leads to the formation of proximity-dependent DNAzyme in the presence of hemin to produce a highly sensitive biosensing system. The binary target inputs can be used for successful building of AND logic gate, which is validated by polyacrylamide gel electrophoresis, surface plasmon resonance and the biosensing signal. The developed biosensing system shows a linear response of the output chemiluminescence signal to input binary miRNAs with a detection limit of 30 fM. It can be used for miRNAs analysis in complex sample matrix. This system provides a simple and reusable platform for logic gate operation and enzyme-free, highly sensitive, and specific multianalysis of miRNAs.

Plasmonic fluorescent CdSe/Cu2S hybrid nanocrystals for multichannel imaging and cancer directed photo-thermal therapy

A simple, crude Jatropha curcas (JC) oil-based synthesis approach, devoid of any toxic phosphine and pyrophoric ligands, to produce size and shape tuned CdSe QDs and a further copper sulfide (Cu2S) encasing is presented. The QDs exhibited excellent photoluminescent properties with narrow band gap emission. Furthermore, the Cu2S shell rendered additional cytocompatibility and stability to the hybrid nanomaterial, which are major factors for translational and clinical applications of QDs. The nanocomposites were PEGylated and folate conjugated to augment their cytoamiability and enhance their specificity towards cancer cells. The nanohybrids possess potentials for visible, near infrared (NIR), photoacoustic (PA) and computed tomography (μCT) imaging. The diverse functionality of the composite was derived from the multi-channel imaging abilities and thermal competence on NIR laser irradiation to specifically actuate the photo-thermal ablation of brain cancer cells.

An Efficient Lanthanide-Dependent DNAzyme Cleaving 2'-5'-Linked RNA

RNA can form two types of linkage. In addition to the predominant 3'-5' linkage, 2'-5'-linked RNA is also important in biology, medicine, and prebiotic studies. Here, in vitro selection was used to isolate a DNAzyme that specifically cleaves 2'-5' RNA by using Ce(3+) as the metal cofactor, but leaves the 3'-5' counterpart intact. This Ce5 DNAzyme requires trivalent light lanthanide ions and shows a rate of 0.16 min(-1) in the presence of 10 μm Ce(3+) ; the activity decreases with heavier lanthanide ions. This is the fastest DNAzyme reported for this reaction, and it might enable applications in chemical biology. As a proof-of-concept, using this DNAzyme, the reactions between phosphorothioate-modified RNA and strongly thiophilic metals (Hg(2+) and Tl(3+) ) were studied as a function of pH.

A target responsive aptamer machine for label-free and sensitive non-enzymatic recycling amplification detection of ATP

Based on a new target-triggered aptamer molecular machine, a label-free and non-enzymatic target recycling amplification strategy for sensitive fluorescence detection of ATP in human serums is described. The presence of the target ATP together with the DNA fuel strand initiates the operation of the aptamer machine and leads to cyclic reuse of ATP and the release of many G-quadruplex sequences, which associate with a fluorescent dye to generate significantly amplified fluorescence signals to achieve sensitive detection of ATP.

A DNAzyme requiring two different metal ions at two distinct sites

Most previously reported RNA-cleaving DNAzymes require only a single divalent metal ion for catalysis. We recently reported a general trivalent lanthanide-dependent DNAzyme named Ce13d. This work shows that Ce13d requires both Na⁺ and a trivalent lanthanide (e.g. Ce³⁺), simultaneously. This discovery is facilitated by the sequence similarity between Ce13d and a recently reported Na⁺-specific DNAzyme, NaA43. The Ce13d cleavage rate linearly depends on the concentration of both metal ions. Sensitized Tb³⁺ luminescence and DMS footprinting experiments indicate that the guanines in the enzyme loop are important for Na⁺-binding. The Na⁺ dissociation constants of Ce13d measured from the cleavage activity assay, Tb³⁺ luminescence and DMS footprinting are 24.6, 16.3 and 47 mM, respectively. Mutation studies indicate that the role of Ce³⁺ might be replaced by G₂₃ in NaA43. Ce³⁺ functions by stabilizing the transition state phosphorane, thus promoting cleavage. G₂₃ competes favorably with low concentration Ce³⁺ (below 1 μM). The G₂₃-to-hypoxanthine mutation suggests the N1 position of the guanine as a hydrogen bond donor. Together, Ce13d has two distinct metal binding sites, each fulfilling a different role. DNAzymes can be quite sophisticated in utilizing metal ions for catalysis and molecular recognition, similar to protein metalloenzymes.

A New Na(+)-Dependent RNA-Cleaving DNAzyme with over 1000-fold Rate Acceleration by Ethanol

Enzymes working in organic solvents are important for analytical chemistry, catalysis, and mechanistic studies. Although a few protein enzymes are highly active in organic solvents, little is known regarding nucleic acid-based enzymes. Herein, we report the first RNA-cleaving DNAzyme, named EtNa, that works optimally in concentrated organic solvents containing only monovalent Na(+). The EtNa DNAzyme has a rate of 2.0 h(-1) in 54% ethanol (with 120 mM NaCl and no divalent metal ions), and a Kd of 21 mm Na(+). It retains activity even in 72% ethanol as well as in DMSO. With 4 mm Na(+), the rate in 54% ethanol is >1000-fold higher than that in water. We also demonstrated the use of EtNa to measuring the ethanol content in alcoholic drinks. In total, this DNAzyme has three unique features: divalent metal independent activity, Na(+) selectivity among monovalent metals, and acceleration by organic solvents.

Accelerating peroxidase mimicking nanozymes using DNA

DNA-capped iron oxide nanoparticles are nearly 10-fold more active as a peroxidase mimic for TMB oxidation than naked nanoparticles. To understand the mechanism, the effect of DNA length and sequence is systematically studied, and other types of polymers are also compared. This rate enhancement is more obvious with longer DNA and, in particular, poly-cytosine. Among the various polymer coatings tested, DNA offers the highest rate enhancement. A similar acceleration is also observed for nanoceria. On the other hand, when the positively charged TMB substrate is replaced by the negatively charged ABTS, DNA inhibits oxidation. Therefore, the negatively charged phosphate backbone and bases of DNA can increase TMB binding by the iron oxide nanoparticles, thus facilitating the oxidation reaction in the presence of hydrogen peroxide.

Mismatch extension of DNA polymerases and high-accuracy single nucleotide polymorphism diagnostics by gold nanoparticle-improved isothermal amplification

Sequence mismatches may induce nonspecific extension reaction, causing false results for SNP diagnostics. Herein, we systematically investigated the impact of various 3'-terminal mismatches on isothermal amplification catalyzed by representative DNA polymerases. Despite their diverse efficiencies depending on types of mismatch and kinds of DNA polymerase, all 12 kinds of single 3'-terminal mismatches induced the extension reaction. Generally, only several mismatches (primer-template, C-C, G-A, A-G, and A-A) present an observable inhibitory effect on the amplification reaction, whereas other mismatches trigger amplified signals as high as those of Watson-Crick pairs. The related mechanism was deeply discussed, and a primer-design guideline for specific SNP analysis was summarized. Furthermore, we found that the addition of appropriate gold nanoparticles (AuNPs) can significantly inhibit mismatch extension and enhance the amplification specificity. Also the high-accuracy SNP analysis of human blood genomic DNA has been demonstrated by AuNPs-improved isothermal amplification, the result of which was verified by sequencing (the gold standard method for SNP assay). Collectively, this work provides mechanistic insight into mismatch behavior and achieves accurate SNP diagnostics, holding great potential for the application in molecular diagnostics and personalized medicine.

ATRP-based synthesis and characterization of light-responsive coatings for transdermal delivery systems

The grafting of poly(hydroxyethylmethacrylate) on polymeric porous membranes via atom transfer radical polymerization (ATRP) and subsequent modification with a photo-responsive spiropyran derivative is described. This method leads to photo-responsive membranes with desirable properties such as light-controlled permeability changes, exceptional photo-stability and repeatability of the photo-responsive switching. Conventional track etched polyester membranes were first treated with plasma polymer coating introducing anchoring groups, which allowed the attachment of ATRP-initiator molecules on the membrane surface. Surface initiated ARGET-ATRP of hydroxyethylmethacrylate (where ARGET stands for activator regenerated by electron transfer) leads to a membrane covered with a polymer layer, whereas the controlled polymerization procedure allows good control over the thickness of the polymer layer in respect to the polymerization conditions. Therefore, the final permeability of the membranes could be tailored by choice of pore diameter of the initial membranes, applied monomer concentration or polymerization time. Moreover a remarkable switch in permeability (more than 1000%) upon irradiation with UV-light could be achieved. These properties enable possible applications in the field of transdermal drug delivery, filtration, or sensing.

DYNAMERS: dynamic polymers as self-healing materials

An overview of recent advances made in the field of constitutional dynamic materials, in particular dynamic polymers, dynamers, displaying self-healing features.

DNA adsorption by indium tin oxide nanoparticles

The high conductivity and optical transparency of indium tin oxide (ITO) has made it a popular material in the electronic industry. Recently, its application in biosensors is also explored. To understand its biointerface chemistry, we herein investigate its interaction with fluorescently labeled single-stranded oligonucleotides using ITO nanoparticles (NPs). The fluorescence of DNA is efficiently quenched after adsorption, and the interaction between DNA and ITO NPs is strongly dependent on the surface charge of ITO. At low pH, the ITO surface is positively charged to afford a high DNA adsorption capacity. Adsorption is also influenced by the sequence and length of DNA. For its components, In2O3 adsorbs DNA more strongly while SnO2 repels DNA at neutral pH. The DNA adsorption property of ITO is an averaging result from both components. DNA adsorption is confirmed to be mainly by the phosphate backbone via displacement experiments using free phosphate or DNA bases. Last, DNA-induced DNA desorption by forming duplex DNA is demonstrated on ITO, while the same reaction is more difficult to achieve on other metal oxides including CeO2, TiO2, and Fe3O4 because these particles adsorb DNA more tightly.

Positional assembly of hemin and gold nanoparticles in graphene-mesoporous silica nanohybrids for tandem catalysis

A hybrid catalyst in which two different types of enzyme mimics are positioned in spatially separate domains within a graphene–mesoporous silica support is presented.

Here, for the first time, a hybrid catalyst in which hemin and gold nanoparticles are positioned in spatially separate domains within a graphene–mesoporous silica support is presented. Specifically, monomeric hemin can be anchored on the inner exposed graphene surface of a graphene–mesoporous silica hybrid (GS) via π–π stacking interactions. After the assembly, such nanocomposites can function as a peroxidase mimic. Next, gold nanoparticles, which act as artificial glucose oxidase, can be conjugated to the functional NH₂ groups present on the outer coated silica surface. As a result, the integrated catalysts containing multiple catalytic sites can be used to catalyze sequential reactions, without the aid of true enzymes. This work is an important step forward in positional assembly of biomimetic catalysts for artificially mimicking natural organelles or important chemical transformations in the future.

Bio-functionalized silver nanoparticles for selective colorimetric sensing of toxic metal ions and antimicrobial studies

Hibiscus Sabdariffa (Gongura) plant extracts (leaves (HL) and stem (HS)) were used for the first time in the green synthesis of bio-functionalized silver nanoparticles (AgNPs). The bio-functionality of AgNPs has been successfully utilized for selective colorimetric sensing of potentially health and environmentally hazardous Hg(2+), Cd(2+) and Pb(2+) metal ions at ppm level in aqueous solution. Importantly, clearly distinguishable colour for all three metal ions was observed. The influence of extract preparation condition and pH were also explored on the formation of AgNPs. Both selectivity and sensitivity differed for AgNPs synthesized from different parts of the plant. Direct correlation between the stability of green synthesized AgNPs at different pH and its antibacterial effects has been established. The selective colorimetric sensing of toxic metal ions and antimicrobial effect of green synthesized AgNPs demonstrated the multifunctional applications of green nanotechnology.

DNA as a powerful tool for morphology control, spatial positioning, and dynamic assembly of nanoparticles

Several properties of nanomaterials, such as morphologies (e.g., shapes and surface structures) and distance dependent properties (e.g., plasmonic and quantum confinement effects), make nanomaterials uniquely qualified as potential choices for future applications from catalysis to biomedicine. To realize the full potential of these nanomaterials, it is important to demonstrate fine control of the morphology of individual nanoparticles, as well as precise spatial control of the position, orientation, and distances between multiple nanoparticles. In addition, dynamic control of nanomaterial assembly in response to multiple stimuli, with minimal or no error, and the reversibility of the assemblies are also required. In this Account, we summarize recent progress of using DNA as a powerful programmable tool to realize the above goals. First, inspired by the discovery of genetic codes in biology, we have discovered DNA sequence combinations to control different morphologies of nanoparticles during their growth process and have shown that these effects are synergistic or competitive, depending on the sequence combination. The DNA, which guides the growth of the nanomaterial, is stable and retains its biorecognition ability. Second, by taking advantage of different reactivities of phosphorothioate and phosphodiester backbone, we have placed phosphorothioate at selective positions on different DNA nanostructures including DNA tetrahedrons. Bifunctional linkers have been used to conjugate phosphorothioate on one end and bind nanoparticles or proteins on the other end. In doing so, precise control of distances between two or more nanoparticles or proteins with nanometer resolution can be achieved. Furthermore, by developing facile methods to functionalize two hemispheres of Janus nanoparticles with two different DNA sequences regioselectively, we have demonstrated directional control of nanomaterial assembly, where DNA strands with specific hybridization serve as orthogonal linkers. Third, by using functional DNA that includes DNAzyme, aptamer, and aptazyme, dynamic control of assemblies of gold nanoparticles, quantum dots, carbon nanotubes, and iron oxide nanoparticles in response to one or more stimuli cooperatively have been achieved, resulting in colorimetric, fluorescent, electrochemical, and magnetic resonance signals for a wide range of targets, such as metal ions, small molecules, proteins, and intact cells. Fourth, by mimicking biology, we have employed DNAzymes as proofreading units to remove errors in nanoparticle assembly and further used DNAzyme cascade reactions to modify or repair DNA sequences involved in the assembly. Finally, by taking advantage of different affinities of biotin and desthiobiotin toward streptavidin, we have demonstrated reversible assembly of proteins on DNA origami.