Modeling the Oxygen Activation Chemistry of Methane Monooxygenase and Ribonucleotide Reductase

A novel alkane monooxygenase evolved from a broken piece of ribonucleotide reductase in Geobacillus kaustophilus HTA426 isolated from Mariana Trench

We have accidentally found that a thermophilic Geobacillus kaustophilus HTA426 is capable of degrading alkanes although it has no alkane oxygenating enzyme genes. Our experimental results revealed that a putative ribonucleotide reductase small subunit GkR2loxI (GK2771) gene encodes a novel heterodinuclear Mn-Fe alkane monooxygenase/hydroxylase. GkR2loxI protein can perform two-electron oxidations similar to homonuclear diiron bacterial multicomponent soluble methane monooxygenases. This finding not only answers a long-standing question about the substrate of the R2lox protein clade, but also expands our understanding of the vast diversity and new evolutionary lineage of the bacterial alkane monooxygenase/hydroxylase family.

Preparations of trans- and cis-μ-1,2-Peroxodiiron(III) Complexes

The iron(II) complex with cis,cis-1,3,5-tris(benzylamino)cyclohexane (Bn3CY) (1) has been synthesized and characterized, which reacted with dioxygen to form the peroxo complex 2 in acetone at -60 °C. On the basis of spectroscopic measurements for 2, it was confirmed that the peroxo complex 2 has a trans-μ-1,2 fashion. Additionally, the peroxo complex 2 was reacted with benzoate anion as a bridging agent to give a peroxo complex 3. The results of resonance Raman and 1H-NMR studies supported that the peroxo complex 3 is a cis-μ-1,2-peroxodiiron(III) complex. These spectral features were interpreted by using DFT calculations.

One Ligand to Bind them All: S~C~S2- Carbon- and Sulfur-Based Gem-Dianion as Structuring Ligand for Iron Polymetallic Assemblies

Numerous synthetic models of the FeMo-co cluster of nitrogenases have been proposed to find the simplest structure with relevant reactivity. Indeed, such structures are able to perform multi-electrons reduction processes, such as the conversion of N2 to ammonia, and of CO2 into methane and alkenes. The most challenging parameter to imitate is indeed the central carbide ligand, which is believed to maintain the integrity of iron sulfide assembly during the course of catalytic cycles. The study proposes the use of bis(diphenylthiophosphinoyl)methanediide (SCS)2- as an ideal platform for the synthesis of bi- and tetra-metallic iron complexes, in which the iron-carbon interaction is maintained upon structural diversification and redox state changes.

Comparative oxidative ability of mononuclear and dinuclear high-valent iron-oxo species towards the activation of methane: does the axial/bridge atom modulate the reactivity?

Over the years, mononuclear Fe^IVO species have been extensively studied, but the presence of dinuclear Fe^IVO species in soluble methane monooxygenase (sMMO) has inspired the development of biomimic models that could activate inert substrates such as methane. There are some successful attempts; particularly the [(Por)(m-CBA) Fe^IV(μ-N)Fe^IV(O)(Por˙⁺)]^- species has been reported to activate methane and yield decent catalytic turnover numbers and therefore regarded as the closest to the sMMO enzyme functional model, as no mononuclear Fe^IVO analogues could achieve this feat. In this work, we have studied a series of mono and dinuclear models using DFT and ab initio DLPNO-CCSD(T) calculations to probe the importance of nuclearity in enhancing the reactivity. We have probed the catalytic activities of four complexes: [(HO)Fe^IV(O)(Por)]^- (1), [(HO)Fe^IV(O)(Por˙⁺)] (2), μ-oxo dinuclear iron species [(Por)(m-CBA)Fe^IV(μ-O)Fe^IV(O) (Por˙⁺)]^- (3) and N-bridged dinuclear iron species [(Por)(m-CBA)Fe^IV(μ-N)Fe^IV(O)(Por˙⁺)]^- (4) towards the activation of methane. Additionally, calculations were performed on the mononuclear models [(X)Fe^IV(O)(Por˙⁺)]ⁿ {X = N 4a (n = -2), NH 4b (n = -1) and NH₂4c (n = 0)} to understand the role of nuclearity in the reactivity. DFT calculations performed on species 1-4 suggest an interesting variation among them, with species 1-3 possessing an intermediate spin (S = 1) as a ground state and species 4 possessing a high-spin (S = 2) as a ground state. Furthermore, the two Fe^IV centres in species 3 and 4 are antiferromagnetically coupled, yielding a singlet state with a distinct difference in their electronic structure. On the other hand, species 2 exhibits a ferromagnetic coupling between the Fe^IV and the Por˙⁺ moiety. Our calculations suggest that the higher barriers for the C-H bond activation of methane and the rebound step for species 1 and 3 are very high in energy, rendering them unreactive towards methane, while species 2 and 4 have lower barriers, suggesting their reactivity towards methane. Studies on the system reveal that model 4a has multiple FeN bonds facilitating greater reactivity, whereas the other two models have longer Fe-N bonds and less radical character with steeper barriers. Strong electronic cooperativity is found to be facilitated by the bridging nitride atom, and this cooperativity is suppressed by substituents such as oxygen, rendering them inactive. Thus, our study unravels that apart from enhancing the nuclearity, bridging atoms that facilitate strong cooperation between the metals are required to activate very inert substrates such as methane, and our results are broadly in agreement with earlier experimental findings.

Activation and catalytic transformation of methane under mild conditions

In the last few decades, worldwide scientists have been motivated by the promising production of chemicals from the widely existing methane (CH₄) under mild conditions for both chemical synthesis with low energy consumption and climate remediation. To achieve this goal, a whole library of catalytic chemistries of transforming CH₄ to various products under mild conditions is required to be developed. Worldwide scientists have made significant efforts to reach this goal. These significant efforts have demonstrated the feasibility of oxidation of CH₄ to value-added intermediate compounds including but not limited to CH₃OH, HCHO, HCOOH, and CH₃COOH under mild conditions. The fundamental understanding of these chemical and catalytic transformations of CH₄ under mild conditions have been achieved to some extent, although currently neither a catalyst nor a catalytic process can be used for chemical production under mild conditions at a large scale. In the academic community, over ten different reactions have been developed for converting CH₄ to different types of oxygenates under mild conditions in terms of a relatively low activation or catalysis temperature. However, there is still a lack of a molecular-level understanding of the activation and catalysis processes performed in extremely complex reaction environments under mild conditions. This article reviewed the fundamental understanding of these activation and catalysis achieved so far. Different oxidative activations of CH₄ or catalytic transformations toward chemical production under mild conditions were reviewed in parallel, by which the trend of developing catalysts for a specific reaction was identified and insights into the design of these catalysts were gained. As a whole, this review focused on discussing profound insights gained through endeavors of scientists in this field. It aimed to present a relatively complete picture for the activation and catalytic transformations of CH₄ to chemicals under mild conditions. Finally, suggestions of potential explorations for the production of chemicals from CH₄ under mild conditions were made. The facing challenges to achieve high yield of ideal products were highlighted and possible solutions to tackle them were briefly proposed.

Synthesis of Carbonato- and Doubly Oxido-Bridged Diruthenium(III,IV) Complex and Reactions with Cations

Doubly oxido-bridged transition metal moieties, {M₂(μ-O)₂}, play important roles as oxidation reaction centers in nature. This work features a diruthenium(III,IV) complex with a doubly oxido-bridged core {Ru₂^III,IV(μ-O)₂}³⁺ with a carbonato bridged between the two ruthenium centers, M[{Ru^III,IV(ebpma)}₂(μ-O)₂(μ-O₂CO)]₂(PF₆)₃ (M[1_CO3]₂(PF₆)₃; Carbonato complex, ebpma; ethylbis(2-pyridymethyl)amine), and explores the interactions of this complex with cations (H⁺ and M⁺). M[1_CO3]₂(PF₆)₃ was formed via reactions of a singly oxido-bridged complex, [{Ru^III,IVCl₂(ebpma)}₂(μ-O)]PF₆·(CH₃)₂CO, with M₂CO₃ (M = K, Na) or with CO₂(g), adjusted to around pH 12 with NaOH(aq.), in a water-acetone mixed solvent. The Carbonato complex was isolated as a powder in the form of M[1_CO3]₂(PF₆)₃ (M = K, Na), because of the interactions between the carbonato moiety and K⁺ or Na⁺ in the solid structure. In acidic aqueous solutions, unexpectedly, the carbonato ligand remained bound to the doubly bridged core, {Ru₂^III,IV(μ-O)₂}³⁺ or {Ru₂^III,IV(μ-O)(μ-OH)}⁴⁺, without decarboxylation even under pH 1.0. Two-step one-protonation/deprotonation occurred reversibly between pH 1.0 and 13.2 to the bridging oxido and carbonato ligands. The structures of the corresponding one- and two-protonated complexes ([1_CO3H]²⁺ and [1_CO32H]³⁺) were successfully characterized.

Artificial Metalloproteins with Dinuclear Iron-Hydroxido Centers

Dinuclear iron centers with a bridging hydroxido or oxido ligand form active sites within a variety of metalloproteins. A key feature of these sites is the ability of the protein to control the structures around the Fe centers, which leads to entatic states that are essential for function. To simulate this controlled environment, artificial proteins have been engineered using biotin-streptavidin (Sav) technology in which Fe complexes from adjacent subunits can assemble to form [Fe^III-(μ-OH)-Fe^III] cores. The assembly process is promoted by the site-specific localization of the Fe complexes within a subunit through the designed mutation of a tyrosinate side chain to coordinate the Fe centers. An important outcome is that the Sav host can regulate the Fe···Fe separation, which is known to be important for function in natural metalloproteins. Spectroscopic and structural studies from X-ray diffraction methods revealed uncommonly long Fe···Fe separations that change by less than 0.3 Å upon the binding of additional bridging ligands. The structural constraints imposed by the protein host on the di-Fe cores are unique and create examples of active sites having entatic states within engineered artificial metalloproteins.

Advances in the synthesis, characterisation, and mechanistic understanding of active sites in Fe-zeolites for redox catalysts

The recent research developments on the active sites in Fe-zeolites for redox catalysis are discussed. Building on the characterisation of the α-Fe/α-O active sites in the beta and chabazite zeolites, we demonstrate a bottom-up approach to successfully understand and develop Fe-zeolite catalysts. We use the room temperature benzene to phenol reaction as a relevant example. We then suggest how the spectroscopic identification of other monomeric and dimeric iron sites could be tackled. The challenges in the characterisation of active sites and intermediates in NOX selective catalytic reduction catalysts and further development of catalysts for mild partial methane oxidation are briefly discussed.

Electronic structure and reactivity of Fe(iv)oxo species in metal-organic frameworks

We investigate the potential use of Fe(iv)oxo species supported on a metal-organic framework in the catalytic hydroxylation of methane to produce methanol. We use periodic density-functional theory calculations at the 6-31G**/B3LYP level of theory to study the electronic structure and chemical reactivity in the hydrogen abstraction reaction from methane in the presence of Fe(iv)O(oxo) supported on MOF-74. Our results indicate that the Fe(iv)O moiety in MOF-74 is characterised by a highly reactive (quintet) ground-state, with a distance between Fe(iv) and O(oxo) of 1.601 Å, consistent with other high-spin Fe(iv)O inorganic complexes in the gas phase and in aqueous solution. Similar to the latter systems, the highly electrophilic character (and thus the reactivity) of Fe(iv)O in MOF-74 is determined by the presence of a low-lying anti-bonding virtual orbital (3σ*), which acts as an electron acceptor in the early stages of the hydrogen atom abstraction from methane. We estimate an energy barrier for hydrogen abstraction of 50.77 kJ mol-1, which is comparable to the values estimated in other gas-phase and hydrated Fe(iv)O-based complexes with the ability to oxidise methane. Our findings therefore suggest that metal-organic frameworks can provide suitable supports to develop new solid-state catalysts for organic oxidation reactions.

The Rv2633c protein of Mycobacterium tuberculosis is a non-heme di-iron catalase with a possible role in defenses against oxidative stress

The Rv2633c gene in Mycobacterium tuberculosis is rapidly up-regulated after macrophage infection, suggesting that Rv2633c is involved in M. tuberculosis pathogenesis. However, the activity and role of the Rv2633c protein in host colonization is unknown. Here, we analyzed the Rv2633c protein sequence, which revealed the presence of an HHE cation-binding domain common in hemerythrin-like proteins. Phylogenetic analysis indicated that Rv2633c is a member of a distinct subset of hemerythrin-like proteins exclusive to mycobacteria. The Rv2633c sequence was significantly similar to protein sequences from other pathogenic strains within that subset, suggesting that these proteins are involved in mycobacteria virulence. We expressed and purified the Rv2633c protein in Escherichia coli and found that it contains two iron atoms, but does not behave like a hemerythrin. It migrated as a dimeric protein during size-exclusion chromatography. It was not possible to reduce the protein or observe any evidence for its interaction with O₂ However, Rv2633c did exhibit catalase activity with a k_cat of 1475 s^-1 and K_m of 10.1 ± 1.7 mm Cyanide and azide inhibited the catalase activity with K_i values of 3.8 μm and 37.7 μm, respectively. Rv2633c's activity was consistent with a role in defenses against oxidative stress generated during host immune responses after M. tuberculosis infection of macrophages. We note that Rv2633c is the first example of a non-heme di-iron catalase, and conclude that it is a member of a subset of hemerythrin-like proteins exclusive to mycobacteria, with likely roles in protection against host defenses.

Unprecedented tetranuclear complexes with “weighing balance shaped” topology: single crystal structures, unusual EPR spectra, magnetic properties and antioxidant activity

Two new copper(ii) complexes have been synthesized and characterized by single crystal X-ray diffraction.

Redox inactive metal ion triggered N-dealkylation by an iron catalyst with dioxygen activation: a lesson from lipoxygenases

Utilization of dioxygen as the terminal oxidant at ambient temperature is always a challenge in redox chemistry, because it is hard to oxidize a stable redox metal ion like iron(III) to its high oxidation state to initialize the catalytic cycle. Inspired by the dioxygenation and co-oxidase activity of lipoxygenases, herein, we introduce an alternative protocol to activate the sluggish iron(III) species with non-redox metal ions, which can promote its oxidizing power to facilitate substrate oxidation with dioxygen, thus initializing the catalytic cycle. In oxidations of N,N-dimethylaniline and its analogues, adding Zn(OTf)2 to the [Fe(TPA)Cl2]Cl catalyst can trigger the amine oxidation with dioxygen, whereas [Fe(TPA)Cl2]Cl alone is very sluggish. In stoichiometric oxidations, it has also been confirmed that the presence of Zn(OTf)2 can apparently improve the electron transfer capability of the [Fe(TPA)Cl2]Cl complex. Experiments using different types of substrates as trapping reagents disclosed that the iron(IV) species does not occur in the catalytic cycle, suggesting that oxidation of amines is initialized by electron transfer rather than hydrogen abstraction. Combined experiments from UV-Vis, high resolution mass spectrometry, electrochemistry, EPR and oxidation kinetics support that the improved electron transfer ability of iron(III) species originates from its interaction with added Lewis acids like Zn(2+) through a plausible chloride or OTf(-) bridge, which has promoted the redox potential of iron(III) species. The amine oxidation mechanism was also discussed based on the available data, which resembles the co-oxidase activity of lipoxygenases in oxidative dealkylation of xenobiotic metabolisms where an external electron donor is not essential for dioxygen activation.

Unprecedented copper(ii) mediated in situ formation of gem-diol binuclear complexes: a combined experimental and computational study

The two alkoxo bridged complexes [Cu₂(L¹)₂(HL²)₂(H₂O)](NO₃)₂·2H₂O 1 and [Cu₂(L¹)₂(HL²)₂](NO₃)₂·H₂O 2 have been synthesized by metal assisted hydrolysis with two Schiff bases, where L¹ is 2-benzoylpyridine and HL² is phenyl(pyridin-2-yl)methanediol.

Transition metal complexes and the activation of dioxygen

In order to address how diverse metalloprotein active sites, in particular those containing iron and copper, guide O₂binding and activation processes to perform diverse functions, studies of synthetic models of the active sites have been performed. These studies have led to deep, fundamental chemical insights into how O₂coordinates to mono- and multinuclear Fe and Cu centers and is reduced to superoxo, peroxo, hydroperoxo, and, after O-O bond scission, oxo species relevant to proposed intermediates in catalysis. Recent advances in understanding the various factors that influence the course of O₂activation by Fe and Cu complexes are surveyed, with an emphasis on evaluating the structure, bonding, and reactivity of intermediates involved. The discussion is guided by an overarching mechanistic paradigm, with differences in detail due to the involvement of disparate metal ions, nuclearities, geometries, and supporting ligands providing a rich tapestry of reaction pathways by which O₂is activated at Fe and Cu sites.

Synthesis and properties of the cyano complex of oxo-centered triruthenium core [Ru3(μ3-O)(μ-CH3COO)6(pyridine)2(CN)]

The preparation and properties of a new cyano complex containing the Ru3(μ3-O) core, [Ru3(μ3-O)(μ-CH3COO)6(py)2(CN)] (1; py = pyridine), are reported. Complex 1 in CH2Cl2 showed intense absorption bands at 244, 334, and 662 nm, corresponding to a π-π* transition of the ligand, cluster-to-ligand charge transfer, and intracluster transitions, respectively. The cyclic voltammogram of 1 in 0.1 M (n-Bu)4NPF6-CH2Cl2 showed redox waves for the processes Ru3(II,II,III)/Ru3(II,III,III), Ru3(II,III,III)/Ru3(III,III,III), and Ru3(III,III,III)/Ru3(III,III,IV) at E1/2 = -1.49, -0.26, and +1.03 V vs Ag/AgCl, respectively. The first two redox potentials are more negative by ca. 0.2 V in comparison with the corresponding potentials of [Ru3(μ3-O)(μ-CH3COO)6(py)3](+). This is in sharp contrast to the positive shifts of the corresponding waves of [Ru3(II,III,III)(μ3-O)(μ-CH3COO)6(py)2(CO)]. Density functional theory (DFT) calculations of [Ru3(II,III,III)(μ3-O)(μ-CH3COO)6(py)3], [Ru3(II,III,III)(μ3-O)(μ-CH3COO)6(py)2(CN)](-), and [Ru3(II,III,III)(μ3-O)(μ-CH3COO)6(py)2(CO)] showed that the positive charge of the ruthenium is delocalized over the triruthenium cores of the first two and is localized as Ru(II)(CO){Ru(III)(py)}2 in the CO complex. The calculations explain the difference in the π interactions of the two ligands with the triruthenium cores.

Versatile reactivity of a solvent-coordinated diiron(II) compound: synthesis and dioxygen reactivity of a mixed-valent Fe(II)Fe(III) species

A new, DMF-coordinated, preorganized diiron compound [Fe2(N-Et-HPTB)(DMF)4](BF4)3 (1) was synthesized, avoiding the formation of [Fe(N-Et-HPTB)](BF4)2 (10) and [Fe2(N-Et-HPTB)(μ-MeCONH)](BF4)2 (11), where N-Et-HPTB is the anion of N,N,N',N'-tetrakis[2-(1-ethylbenzimidazolyl)]-2-hydroxy-1,3-diaminopropane. Compound 1 is a versatile reactant from which nine new compounds have been generated. Transformations include solvent exchange to yield [Fe2(N-Et-HPTB)(MeCN)4](BF4)3 (2), substitution to afford [Fe2(N-Et-HPTB)(μ-RCOO)](BF4)2 (3, R = Ph; 4, RCOO = 4-methyl-2,6-diphenyl benzoate]), one-electron oxidation by (Cp2Fe)(BF4) to yield a Robin-Day class II mixed-valent diiron(II,III) compound, [Fe2(N-Et-HPTB)(μ-PhCOO)(DMF)2](BF4)3 (5), two-electron oxidation with tris(4-bromophenyl)aminium hexachloroantimonate to generate [Fe2(N-Et-HPTB)Cl3(DMF)](BF4)2 (6), reaction with (2,2,6,6-tetramethylpiperidin-1-yl)oxyl to form [Fe5(N-Et-HPTB)2(μ-OH)4(μ-O)(DMF)2](BF4)4 (7), and reaction with dioxygen to yield an unstable peroxo compound that decomposes at room temperature to generate [Fe4(N-Et-HPTB)2(μ-O)3(H2O)2](BF4)·8DMF (8) and [Fe4(N-Et-HPTB)2(μ-O)4](BF4)2 (9). Compound 5 loses its bridging benzoate ligand upon further oxidation to form [Fe2(N-Et-HPTB)(OH)2(DMF)2](BF4)3 (12). Reaction of the diiron(II,III) compound 5 with dioxygen was studied in detail by spectroscopic methods. All compounds (1-12) were characterized by single-crystal X-ray structure determinations. Selected compounds and reaction intermediates were further examined by a combination of elemental analysis, electronic absorption spectroscopy, Mössbauer spectroscopy, EPR spectroscopy, resonance Raman spectroscopy, and cyclic voltammetry.

Iron-mediated C-H bond amination by organic azides on a tripodal bis(anilido)iminophosphorane platform

The bis(anilido)iminophosphorane complex, abbreviated as [((Mes)N2N(Ad))Fe(THF)], can react with alkyl azides to yield ligand-based C-H bond amination products suggesting the high reactivity of iron(IV)-imido species supported by the tripodal bis(anilido)iminophosphorane ligand platform [(Mes)N2N(Ad)](2-).

Unexpected weak magnetic exchange coupling between haem and non-haem iron in the catalytic site of nitric oxide reductase (NorBC) from Paracoccus denitrificans1

Bacterial NOR (nitric oxide reductase) is a major source of the powerful greenhouse gas N2O. NorBC from Paracoccus denitrificans is a heterodimeric multi-haem transmembrane complex. The active site, in NorB, comprises high-spin haem b3 in close proximity with non-haem iron, FeB. In oxidized NorBC, the active site is EPR-silent owing to exchange coupling between FeIII haem b3 and FeBIII (both S=5/2). On the basis of resonance Raman studies [Moënne-Loccoz, Richter, Huang, Wasser, Ghiladi, Karlin and de Vries (2000) J. Am. Chem. Soc. 122, 9344–9345], it has been assumed that the coupling is mediated by an oxo-bridge and subsequent studies have been interpreted on the basis of this model. In the present study we report a VFVT (variable-field variable-temperature) MCD (magnetic circular dichroism) study that determines an isotropic value of J=−1.7 cm−1 for the coupling. This is two orders of magnitude smaller than that encountered for oxo-bridged diferric systems, thus ruling out this configuration. Instead, it is proposed that weak coupling is mediated by a conserved glutamate residue.

A high-spin iron(IV)-oxo complex supported by a trigonal nonheme pyrrolide platform

We report the generation and characterization of a new high-spin iron(IV)-oxo complex supported by a trigonal nonheme pyrrolide platform. Oxygen-atom transfer to [(tpa(Mes))Fe(II)](-) (tpa(Ar) = tris(5-arylpyrrol-2-ylmethyl)amine) in acetonitrile solution affords the Fe(III)-alkoxide product [(tpa(Mes2MesO))Fe(III)](-) resulting from intramolecular C-H oxidation with no observable ferryl intermediates. In contrast, treatment of the phenyl derivative [(tpa(Ph))Fe(II)](-) with trimethylamine N-oxide in acetonitrile solution produces the iron(IV)-oxo complex [(tpa(Ph))Fe(IV)(O)](-) that has been characterized by a suite of techniques, including mass spectrometry as well as UV-vis, FTIR, Mössbauer, XAS, and parallel-mode EPR spectroscopies. Mass spectral, FTIR, and optical absorption studies provide signatures for the iron-oxo chromophore, and Mössbauer and XAS measurements establish the presence of an Fe(IV) center. Moreover, the Fe(IV)-oxo species gives parallel-mode EPR features indicative of a high-spin, S = 2 system. Preliminary reactivity studies show that the high-spin ferryl tpa(Ph) complex is capable of mediating intermolecular C-H oxidation as well as oxygen-atom transfer chemistry.

Hydroxylation catalysis by mononuclear and dinuclear iron oxo catalysts: a methane monooxygenase model system versus the Fenton reagent Fe(IV)O(H2O)5(2+)

Hydroxylation of aliphatic C-H bonds is a chemically and biologically important reaction, which is catalyzed by the oxidoiron group FeO(2+) in both mononuclear (heme and nonheme) and dinuclear complexes. We investigate the similarities and dissimilarities of the action of the FeO(2+) group in these two configurations, using the Fenton-type reagent [FeO(2+) in a water solution, FeO(H(2)O)(5)(2+)] and a model system for the methane monooxygenase (MMO) enzyme as representatives. The high-valent iron oxo intermediate MMOH(Q) (compound Q) is regarded as the active species in methane oxidation. We show that the electronic structure of compound Q can be understood as a dimer of two Fe(IV)O(2+) units. This implies that the insights from the past years in the oxidative action of this ubiquitous moiety in oxidation catalysis can be applied immediately to MMOH(Q). Electronically the dinuclear system is not fundamentally different from the mononuclear system. However, there is an important difference of MMOH(Q) from FeO(H(2)O)(5)(2+): the largest contribution to the transition state (TS) barrier in the case of MMOH(Q) is not the activation strain (which is in this case the energy for the C-H bond lengthening to the TS value), but it is the steric hindrance of the incoming CH(4) with the ligands representing glutamate residues. The importance of the steric factor in the dinuclear system suggests that it may be exploited, through variation in the ligand framework, to build a synthetic oxidation catalyst with the desired selectivity for the methane substrate.