Bioactive Thin Film of Acidic Fibroblast Growth Factor Fabricated by Layer-by-Layer Assembly

Biocompatible Macroion/Growth Factor Assemblies for Medical Applications

Growth factors are a class of proteins that play a role in the proliferation (the increase in the number of cells resulting from cell division) and differentiation (when a cell undergoes changes in gene expression becoming a more specific type of cell) of cells. They can have both positive (accelerating the normal healing process) and negative effects (causing cancer) on disease progression and have potential applications in gene therapy and wound healing. However, their short half-life, low stability, and susceptibility to degradation by enzymes at body temperature make them easily degradable in vivo. To improve their effectiveness and stability, growth factors require carriers for delivery that protect them from heat, pH changes, and proteolysis. These carriers should also be able to deliver the growth factors to their intended destination. This review focuses on the current scientific literature concerning the physicochemical properties (such as biocompatibility, high affinity for binding growth factors, improved bioactivity and stability of the growth factors, protection from heat, pH changes or appropriate electric charge for growth factor attachment via electrostatic interactions) of macroions, growth factors, and macroion-growth factor assemblies, as well as their potential uses in medicine (e.g., diabetic wound healing, tissue regeneration, and cancer therapy). Specific attention is given to three types of growth factors: vascular endothelial growth factors, human fibroblast growth factors, and neurotrophins, as well as selected biocompatible synthetic macroions (obtained through standard polymerization techniques) and polysaccharides (natural macroions composed of repeating monomeric units of monosaccharides). Understanding the mechanisms by which growth factors bind to potential carriers could lead to more effective delivery methods for these proteins, which are of significant interest in the diagnosis and treatment of neurodegenerative and civilization diseases, as well as in the healing of chronic wounds.

Layer-by-Layer Surface Modification of Alendronate-Loaded Polyester Microparticles-Enabling Protein Immobilization

The highly inert surface of polyester micro- and nano- drug carriers is a challenging substrate for further modification. The presence of surface moieties suitable for macromolecule coupling is crucial in the development of targeted drug delivery systems. Among available methods of surface activation, those based on adsorption of charged macromolecules may be carried out in mild conditions. In this work, alendronate-loaded microcores of three polyesters: poly-ε-caprolactone (PCL), poly(l-lactide-co-ε-caprolactone) (PLA-co-PCL) and poly(lactic-co-glycolic acid) (PLGA) were coated with three polyelectrolyte shells composed of chitosan/heparin (CHIT/HEP), polyallylamine/heparin (PAH/HEP), and polyethyleneimine/heparin (PEI/HEP) via the layer-by-layer method. Subsequently, the feasibility of model protein immobilization on obtained shells was assessed. Electrokinetic potential measurements confirmed the possibility of deposition of all investigated coating variants, and a positive correlation between initial core ζ potential and intensity of charge alterations after deposition of subsequent layers was identified. PEI/HEP assembly was stable in physiological-like conditions, while PAH/HEP multilayers disassembled in presence of phosphate ions, and CHIT/HEP shell showed limited stability in pH 7.4. Fluorescence assays of fluorescein tagged lysozyme surface coupled via ethylcarbodiimide hydrochloride/N-Hydroxysuccinimide (EDC/NHS) click reaction with all shell variants indicated satisfying reaction efficiency. Poly-ε-caprolactone cores coated with CHIT/HEP tetralayer were selected as suitable for model IgG surface immobilization. Antibodies immobilized on the shell surface exhibited a moderate degree of affinity to fluorescent IgG binding protein.

Polysaccharide-Polyplex Nanofilm Coatings Enhance Nanoneedle-Based Gene Delivery and Transfection Efficiency

Non-viral vectors represent versatile and immunologically safer alternatives for nucleic acid delivery. Nanoneedles and high-aspect ratio nanostructures are unconventional but interesting delivery systems, in which delivery is mediated by surface interactions. Herein, nanoneedles are synergistically combined with polysaccharide-polyplex nanofilms and enhanced transfection efficiency is observed, compared to polyplexes in suspension. Different polyplex-polyelectrolyte nanofilm combinations are assessed and it is found that transfection efficiency is enhanced when using polysaccharide-based polyanions, rather than being only specific for hyaluronic acid, as suggested in earlier studies. Moreover, results show that enhanced transfection is not mediated by interactions with the CD44 receptor, previously hypothesized as a major mechanism mediating enhancement via hyaluronate. In cardiac tissue, nanoneedles are shown to increase the transfection efficiency of nanofilms compared to flat substrates; while in vitro, high transfection efficiencies are observed in nanostructures where cells present large interfacing areas with the substrate. The results of this study demonstrate that surface-mediated transfection using this system is efficient and safe, requiring amounts of nucleic acid with an order of magnitude lower than standard culture transfection. These findings expand the spectrum of possible polyelectrolyte combinations that can be used for the development of suitable non-viral vectors for exploration in further clinical trials.

Methods for the Assembly and Characterization of Polyelectrolyte Multilayers as Microenvironments to Modulate Human Mesenchymal Stromal Cell Response

Thin films are of interest in materials design because they allow for the modification of surface properties of materials while the bulk properties of the material are largely unaffected. In this work, we outline methods for the assembly of thin films using a technique known as layer-by-layer (LbL). Furthermore, their interactions with human mesenchymal stromal cells (hMSCs) are discussed. hMSCs are a subject of growing interest because of their potential to treat or cure diseases, given their immunosuppressive properties, multipotent differentiation capabilities, and tissue regeneration capabilities. Numerous improvements and modifications have been suggested for the harvesting, treatment, and culture of hMSCs prior to their administration in human subjects. Here, we discuss methods to assess the interactions of hMSCs with thin LbL-assembled films of heparin and collagen. Three different methods are discussed. The first details the preparation of heparin/collagen multilayers on different surfaces and the seeding of cells on these multilayers. The second method details the characterization of multilayers, including techniques to assess the thickness, roughness, and surface charge of the multilayers, as well as in situ deposition of multilayers. The third method details the analysis of cell interactions with the multilayers, including techniques to assess proliferation, viability, real-time monitoring of hMSC behavior, analysis of hMSC-adhesive proteins on the multilayers, immunomodulatory factor expression of hMSCs, and cytokine expression on heparin/collagen multilayers. We propose that the methods described in this work will assist in the design and characterization of LbL-assembled thin films and the analysis of hMSCs cultured on these thin films.

Correlation between Surface Properties of Polystyrene and Polylactide Materials and Fibroblast and Osteoblast Cell Line Behavior: A Critical Overview of the Literature

Bone reconstruction remains an important challenge today in several clinical situations, notably regarding the control of the competition occurring during proliferation of osteoblasts and fibroblasts. Polystyrene and polylactide are reference materials in the biomedical field. Therefore, it could be expected from the literature that clear correlations have been already established between the behavior of fibroblasts or osteoblasts and the surface characteristics of these materials. After an extensive analysis of the literature, although general trends could be established, our critical review has highlighted the need to develop a more in-depth analysis of the surface properties of these materials. Moreover, the large variation noticed in the experimental conditions used for in vitro animal cell studies impairs comparison between studies. From our comprehensive review on this topic, we have suggested several parameters that would be valuable to standardize to integrate the data from the literature and improve our knowledge on the cell-material interactions.

Simultaneous characterization of physical, chemical, and thermal properties of polymeric multilayers using infrared spectroscopic ellipsometry

In this study, multilayered films of polyethylenimine/poly (sodium-p-styrene sulfonate) (PEI)/(PSS) and type I collagen/heparin sodium (COL)/(HEP) were fabricated using the layer-by-layer technique, and fully characterized using Infrared Variable Angle Spectroscopic Ellipsometry (IRVASE) to simultaneously analyze the chemistry, thickness, and roughness of the multilayers with respect to changes in pH of the washing solution, and changes in temperature. Film topography and Young's modulus were obtained by atomic force microscopy (AFM) and nanoindentation. Our results show that with IRVASE it is possible to analyze the thickness of the multilayers prepared using a washing solution of pH 5, obtaining values of 71.7 nm and 40.3 nm for three bilayers of PEI/PSS and COL/HEP, respectively. Film roughness varies between multilayer systems, obtaining values of 37.76 nm for three bilayers of PEI/PSS and 33.58 nm for three bilayers of COL/HEP. Increasing the pH of the washing solution for PEI/PSS yielded thinner films that were less susceptible to thermal induced changes in film chemistry in the range of 25 - 150 °C. PEI/PSS films decreased in thickness with increasing temperature up to 75 °C, whereas above 75 °C film thickness increased. Through IRVASE, a transition temperature for the PEI/PSS multilayers was observed at 75 °C. Temperatures above 37 °C drastically alter the chemistry and the thickness of the COL/HEP multilayers indicating a possible degradation of the polymers. We obtained, through nanoindentation, a Young's modulus of 15000 kPa and 9000 kPa for 12 bilayers of PEI/PSS and COL/HEP, respectively. These results demonstrate that, using IRVASE, we can simultaneously evaluate the physical, chemical, and thermal properties of synthetic and natural multilayered polymeric films.

Stromal cell-derived factor-1α-encapsulated albumin/heparin nanoparticles for induced stem cell migration and intervertebral disc regeneration in vivo

Intervertebral disc (IVD) degeneration may cause many diseases and pain. Stem cell migration toward the site of IVD degeneration is a key factor for IVD regeneration. In the current study, we prepared albumin/heparin nanoparticles (BHNPs) as injectable carriers of stromal cell-derived factor-1α (SDF-1α, also known as C-X-C motif chemokine 12), a powerful chemoattractant for the homing of bone marrow resident mesenchymal stem cells (MSCs), for protection of the molecule against degradation for a sustained release. The NPs have relatively uniform small size, with a diameter of about 110 nm. The NPs possess a high loading capacity of SDF-1α with a sustained release profile. The bioactivity of the obtained BHNPs/SDF was then studied in vitro and in vivo. The BHNPs/SDF can induce migration of MSCs in a dose-dependent manner in vitro. After injected into the damaged disc, BHNPs/SDF induce much better regeneration of annulus fibrosus and nucleus pulposus, compared to SDF-1α and BHNPs alone, evidenced with better histological grade scores and higher expression of SOX9, Aggrecan, and Collagen type II at the level of both mRNA and protein. This study provides a simple nanoplatform to load SDF-1α and protect it against degradation, with potential application in inductive tissue regeneration in vivo.

STATEMENT OF SIGNIFICANCE

Stem cell migration toward the site of IVD degeneration is a key event to promote IVD regeneration. In the current study, we prepared albumin/heparin nanoparticles (BHNPs) as injectable carriers to protect SDF-1α against degradation and for the sustained release of the molecule. After injected into the damaged disc, BHNPs/SDF induced much better regeneration of IVD, compared to SDF-1α and BHNPs alone. This study provides a simple nanoplatform to load SDF-1α and protect it from degradation, with potential application in inductive tissue regeneration in vivo.

Development of Multilayered Chlorogenate-Peptide Based Biocomposite Scaffolds for Potential Applications in Ligament Tissue Engineering - An <i>In Vitro</i> Study

In this work, for the first time, chlorogenic acid, a natural phytochemical, was conjugated to a lactoferrin derived antimicrobial peptide sequence RRWQWRMKKLG to develop a self-assembled template. To mimic the components of extracellular matrix, we then incorporated Type I Collagen, followed by a sequence of aggrecan peptide (ATEGQVRVNSIYQDKVSL) onto the self-assembled templates for potential applications in ligament tissue regeneration. Mechanical properties and surface roughness were studied and the scaffolds displayed a Young’s Modulus of 169 MP and an average roughness of 72 nm respectively. Thermal phase changes were studied by DSC analysis. Results showed short endothermic peaks due to water loss and an exothermic peak due to crystallization of the scaffold caused by rearrangement of the components. Biodegradability studies indicated a percent weight loss of 27.5 % over a period of 37 days. Furthermore, the scaffolds were found to adhere to fibroblasts, the main cellular component of ligament tissue. The scaffolds promoted cell proliferation and displayed actin stress fibers indicative of cell motility and attachment. Collagen and proteoglycan synthesis were also promoted, demonstrating increased expression and deposition of collagen and proteoglycans. Additionally, the scaffolds exhibited antimicrobial activity against Staphylococcus epidermis bacteria, which is beneficial for minimizing biofilm formation if potentially used as implants. Thus, we have developed a novel biocomposite that may open new avenues to enhance ligament tissue regeneration.

Heparin/collagen encapsulating nerve growth factor multilayers coated aligned PLLA nanofibrous scaffolds for nerve tissue engineering

Biomimicing topological structure of natural nerve tissue to direct axon growth and controlling sustained release of moderate neurotrophic factors are extremely propitious to the functional recovery of damaged nervous systems. In this study, the heparin/collagen encapsulating nerve growth factor (NGF) multilayers were coated onto the aligned poly-L-lactide (PLLA) nanofibrous scaffolds via a layer-by-layer (LbL) self-assembly technique to combine biomolecular signals, and physical guidance cues for peripheral nerve regeneration. Scanning electronic microscopy (SEM) revealed that the surface of aligned PLLA nanofibrous scaffolds coated with heparin/collagen multilayers became rougher and appeared some net-like filaments and protuberances in comparison with PLLA nanofibrous scaffolds. The heparin/collagen multilayers did not destroy the alignment of nanofibers. X-ray photoelectron spectroscopy and water contact angles displayed that heparin and collagen were successfully coated onto the aligned PLLA nanofibrous scaffolds and improved its hydrophilicity. Three-dimensional (3 D) confocal microscopy images further demonstrated that collagen, heparin, and NGF were not only coated onto the surface of aligned PLLA nanofibrous scaffolds but also permeated into the inner of scaffolds. Moreover, NGF presented a sustained release for 2 weeks from aligned nanofibrous scaffolds coated with 5.5 bilayers or above and remained good bioactivity. The heparin/collagen encapsulating NGF multilayers coated aligned nanofibrous scaffolds, in particular 5.5 bilayers or above, was more beneficial to Schwann cells (SCs) proliferation and PC12 cells differentiation as well as the SC cytoskeleton and neurite growth along the direction of nanofibrous alignment compared to the aligned PLLA nanofibrous scaffolds. This novel scaffolds combining sustained release of bioactive NGF and aligned nanofibrous topography presented an excellent potential in peripheral nerve regeneration. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1900-1910, 2017.

Extracellular Matrix (ECM) Multilayer Membrane as a Sustained Releasing Growth Factor Delivery System for rhTGF-β3 in Articular Cartilage Repair

Recombinant human transforming growth factor beta-3 (rhTGF-β₃) is a key regulator of chondrogenesis in stem cells and cartilage formation. We have developed a novel drug delivery system that continuously releases rhTGF-β₃ using a multilayered extracellular matrix (ECM) membrane. We hypothesize that the sustained release of rhTGF-β₃ could activate stem cells and result in enhanced repair of cartilage defects. The properties and efficacy of the ECM multilayer-based delivery system (EMLDS) are investigated using rhTGF-β₃ as a candidate drug. The bioactivity of the released rhTGF-ß3 was evaluated through chondrogenic differentiation of mesenchymal stem cells (MSCs) using western blot and circular dichroism (CD) analyses in vitro. The cartilage reparability was evaluated through implanting EMLDS with endogenous and exogenous MSC in both in vivo and ex vivo models, respectively. In the results, the sustained release of rhTGF-ß3 was clearly observed over a prolonged period of time in vitro and the released rhTGF-β₃ maintained its structural stability and biological activity. Successful cartilage repair was also demonstrated when rabbit MSCs were treated with rhTGF-β3-loaded EMLDS ((+) rhTGF-β3 EMLDS) in an in vivo model and when rabbit chondrocytes and MSCs were treated in ex vivo models. Therefore, the multilayer ECM membrane could be a useful drug delivery system for cartilage repair.

Layer-by-Layer assembled growth factor reservoirs for steering the response of 3T3-cells

Layer-by-Layer (LbL) assemblies of heparin (Hep) and chitosan (Chi) were prepared for use as reservoirs for acidic and basic fibroblast growth factors (aFGFs and bFGFs, respectively). The effects of the architecture and composition of the reservoirs on the viability and proliferation of NIH-3T3 fibroblast cells were studied under starvation conditions. The reservoir stability was monitored by ellipsometry. The aFGF and bFGF loadings were determined using a dissipation-enhanced quartz crystal microbalance (QCM-D). Stability and release assays were performed in a phosphate buffer at physiological conditions. The results demonstrated that the amount of aFGF and bFGF loaded into and released from LbL reservoirs composed of 3 and 6 layer pairs could be controlled. Cell culture assays in low serum culture medium (LSCM) demonstrated that incorporating very small amounts of aFGF and bFGF into the (Hep/Chi)n multilayers significantly improved the proliferation of the NIH-3T3 fibroblasts. The cells did not proliferate on (Hep/Chi)n assemblies prepared in the absence of FGF under identical conditions. The LbL reservoirs were highly effective for the long-term storage (up to 9 months) of aFGF and bFGF. This work demonstrates the potential of LbL reservoirs for use as biomaterial coatings.

A biomimetic collagen/heparin multi-layered porous hydroxyapatite orbital implant for in vivo vascularization studies on the chicken chorioallantoic membrane

BACKGROUND

The vascularization of an orbital implant is a key issue for reducing complications, such as exposure and infection.

METHODS

Here, we developed a facile layer-by-layer assembly approach to modify porous hydroxyapatite (pHA) orbital implants with five collagen (COL)/heparin (HEP) multilayers.

RESULTS

SEM characterization showed that the average pore size of the pHA/(COL/HEP)5 scaffold was 316.8 ± 77.1 μm. After being coated with five COL/HEP multilayers, the mechanical strength was improved compared with that of the pHA scaffolds. The in vitro assay displayed that the pHA scaffolds covered with COL/HEP multilayers resulted in a larger number of human umbilical vein endothelial cells after being cultured for 14 days. The macroscopic evaluation and semi-quantitative vascular density analysis of the chicken chorioallantoic membrane assay showed that the pHA/(COL/HEP)5 scaffolds resulted in more intense angiogenesis than the pHA scaffolds.

CONCLUSIONS

These studies demonstrate that the biomembrane-mimicking coating of COL/HEP multilayers is a simple and effective strategy to endow combined biological performances of pHA orbital implants and to potentially reduce implant-related complications.

Cellular Responses Modulated by FGF-2 Adsorbed on Albumin/Heparin Layer-by-Layer Assemblies

In a typical cell culture system, growth factors immobilized on the cell culture surfaces can serve as a reservoir of bio-signaling molecules, without the need to supplement them additionally into the culture medium. In this paper, we report on the fabrication of albumin/heparin (Alb/Hep) assemblies for controlled binding of basic fibroblast growth factor (FGF-2). The surfaces were constructed by layer-by-layer adsorption of polyelectrolytes albumin and heparin and were subsequently stabilized by covalent crosslinking with glutaraldehyde. An analysis of the surface morphology by atomic force microscopy showed that two Alb/Hep bilayers are required to cover the surface of substrate. The formation of the Alb/Hep assemblies was monitored by the surface plasmon resonance (SPR), the infrared multiinternal reflection spectroscopy (FTIR MIRS) and UV/VIS spectroscopy. The adsorption of FGF-2 on the cross-linked Alb/Hep was followed by SPR. The results revealed that FGF-2 binds to the Alb/Hep assembly in a dose and time-dependent manner up to the surface concentration of 120 ng/cm². The bioactivity of the adsorbed FGF-2 was assessed in experiments in vitro, using calf pulmonary arterial endothelial cells (CPAE). CPAE cells could attach and proliferate on Alb/Hep surfaces. The adsorbed FGF-2 was bioactive and stimulated both the proliferation and the differentiation of CPAE cells. The improvement was more pronounced at a lower FGF-2 surface concentration (30 ng/cm²) than on surfaces with a higher concentration of FGF-2 (120 ng/cm²).

Layer-by-layer assembly of peptide based bioorganic-inorganic hybrid scaffolds and their interactions with osteoblastic MC3T3-E1 cells

In this work we have developed a new family of biocomposite scaffolds for bone tissue regeneration by utilizing self-assembled fluorenylmethyloxycarbonyl protected Valyl-cetylamide (FVC) nanoassemblies as templates. To tailor the assemblies for enhanced osteoblast attachment and proliferation, we incorporated (a) Type I collagen, (b) a hydroxyapatite binding peptide sequence (EDPHNEVDGDK) derived from dentin sialophosphoprotein and (c) the osteoinductive bone morphogenetic protein-4 (BMP-4) to the templates by layer-by-layer assembly. The assemblies were then incubated with hydroxyapatite nanocrystals blended with varying mass percentages of TiO2 nanoparticles and coated with alginate to form three dimensional scaffolds for potential applications in bone tissue regeneration. The morphology was examined by TEM and SEM and the binding interactions were probed by FITR spectroscopy. The scaffolds were found to be non-cytotoxic, adhered to mouse preosteoblast MC3T3-E1 cells and promoted osteogenic differentiation as indicated by the results obtained by alkaline phosphatase assay. Furthermore, they were found to be biodegradable and possessed inherent antibacterial capability. Thus, we have developed a new family of tissue-engineered biocomposite scaffolds with potential applications in bone regeneration.

Rational design of a degradable polyanion for layer-by-layer assembly for encapsulation and release of cationic functional biomolecules

We designed and synthesized a novel degradable polyanion, poly(phthalic ethylene glycol ester), that assembles with various polycationic biomolecules to form layer-by-layer films to encapsulate and release physiologically active biomolecules.

Ordered and kinetically discrete sequential protein release from biodegradable thin films

Multidrug regimens can sometimes treat recalcitrant diseases when single-drug therapies fail. Recapitulating complex multidrug administration from controlled release films for localized delivery remains challenging because their release kinetics are frequently intertwined, and an initial burst release of each drug is usually uncontrollable. Kinetic control over protein release is demonstrated by cross-linking layer-by-layer films during the assembly process. We used biodegradable and naturally derived components and relied on copper-free click chemistry for bioorthogonal covalent cross-links throughout the film that entrap but do not modify the embedded protein. We found that this strategy restricted the interdiffusion of protein while maintaining its activity. By depositing a barrier layer and a second protein-containing layer atop this construct, we generated well-defined sequential protein release with minimal overlap that follows their spatial distribution within the film.

A novel melphalan polymeric prodrug: preparation and property study

The clinical application of melphalan (Me), an anticancer drug for the treatment of hematologic malignancies, has been limited due to its poor water solubility, rapid elimination and lack of target specificity. To solve these problems, O,N-carboxymethyl chitosan-peptide-melphalan conjugates were synthesized and characterized. All polymeric prodrugs showed satisfactory water solubility. It was found that the molecular weight of O,N-carboxymethyl chitosan (O,N-CMCS) and the peptide spacer played a crucial role in controlling the drug content, diameter and drug release properties of O,N-carboxymethyl chitosan-peptide-melphalan conjugates. The studies of in vitro drug release and cell cytotoxicity by MTT assay revealed that, employing the polymeric conjugation strategy and using the peptides glycylglycine (Gly-Gly) as a spacer, the conjugates have good cathepsin X-sensitivity and lower toxicity and the drug release behavior improved remarkably. In conclusion, O,N-carboxymethyl chitosan-peptide-melphalan conjugates could be promising prodrugs for anticancer application.

Application of layer-by-layer coatings to tissue scaffolds – development of an angiogenic biomaterial

Development of flexible coating strategies to promote angiogenesis is critical to effectively treat chronic, non-healing wounds.

Effects of polymer end-group chemistry and order of deposition on controlled protein delivery from layer-by-layer assembly

Layer-by-layer (LBL) assembly is an attractive platform for controlled release of biologics given its mild fabrication process and versatility in coating substrates of any shape. Proteins can be incorporated into LBL coatings by sequentially depositing oppositely charged polyelectrolytes, which self-assemble into nanoscale films on medical devices or tissue engineering scaffolds. However, previously reported LBL platforms often require the use of a few hundred layers to avoid burst release, which hinders their broad translation due to the lengthy fabrication process, cost, and batch-to-batch variability. Here we report a biodegradable LBL platform composed of only 10 layers with tunable protein release kinetics, which is an order of magnitude less than previously reported LBL platforms. We performed a combinatorial study to examine the effects of polymer chemistry and order of deposition of poly(β-amino) esters on protein release kinetics under 81 LBL assembly conditions. Using the optimal "polyelectrolyte couples" for constructing the LBL film, basic fibroblast growth factor (bFGF) was released gradually over 14 days with retained biological activity to stimulate cell proliferation. The method reported herein is applicable for coating various substrates including metals, polymers, and ceramics and may be used for a broad range of biomedical and tissue engineering applications.

Drug releasing polymer thin films: new era of surface-mediated drug delivery

Polymer films and coatings are among the popular and most successful tools to modulate surface properties of biomaterials, specifically tissue responses and fouling behavior. Over the past decade, a novel opportunity has been widely investigated, namely utility of surface coatings in surface-mediated drug delivery. In these applications, deposited polymer films act as both a coating to modulate surface properties and a reservoir for active therapeutic cargo. The field has recently accelerated beyond the proof-of-concept reports toward delivering practical solutions and established technologies for biomedical applications. This review briefly summarizes the recent successes of polymer thin films, specifically those constructed by sequential polymer deposition technique, in surface-mediated drug delivery.

Multiple functionalities of polyelectrolyte multilayer films: new biomedical applications

The design of advanced functional materials with nanometer- and micrometer-scale control over their properties is of considerable interest for both fundamental and applied studies because of the many potential applications for these materials in the fields of biomedical materials, tissue engineering, and regenerative medicine. The layer-by-layer deposition technique introduced in the early 1990s by Decher, Moehwald, and Lvov is a versatile technique, which has attracted an increasing number of researchers in recent years due to its wide range of advantages for biomedical applications: ease of preparation under "mild" conditions compatible with physiological media, capability of incorporating bioactive molecules, extra-cellular matrix components and biopolymers in the films, tunable mechanical properties, and spatio-temporal control over film organization. The last few years have seen a significant increase in reports exploring the possibilities offered by diffusing molecules into films to control their internal structures or design "reservoirs," as well as control their mechanical properties. Such properties, associated with the chemical properties of films, are particularly important for designing biomedical devices that contain bioactive molecules. In this review, we highlight recent work on designing and controlling film properties at the nanometer and micrometer scales with a view to developing new biomaterial coatings, tissue engineered constructs that could mimic in vivo cellular microenvironments, and stem cell "niches."

Postdiffusion of oligo-peptide within exponential growth multilayer films for localized peptide delivery

The multilayers of poly(L-lysine) (PLL) and hyaluronic acid (HA) were constructed by alternating deposition of PLL at high pH and HA at low pH. The exponential growth of the multilayer was proved to be amplified by increasing the pH difference between the two deposition solutions. The exponential growth multilayers of PLL/HA assembled at different pH were utilized as reservoirs for loading a trans-activating transcriptional factor (TAT) peptide. The confocal laser scanning microscopy (CLSM) results indicated that the FITC-labeled TAT could diffuse throughout the exponentially growing PLL/HA film. The amount of peptide embedded within multilayer could be adjusted by both multilayer assembly pH and the TAT loading pH. Compared with (PLL/HA 6.5/6.5)5 multilayer (PLL/HA a/b means that the multilayer film was constructed by using PLL at pH a and HA at pH b), the (PLL/HA 9.5/2.9)5 film can be loaded with more TAT peptide at the same loading pH 6.5. The excess of positively charged TAT peptide within (PLL/HA 9.5/2.9)5 film could not only be ascribed to its extraordinary thickness but also be attributed to its uncompensated negative charge density enhanced by the pH difference between film buildup and peptide loading process. Increasing of the TAT loading pH from 6.5 to 9.5, which increases the pH difference between multilayer assembly and peptide loading process, enhances the uncompensated charge density within (PLL/HA 9.5/2.9)5 film and elevates the peptide density from 13.8 to 25.0 microg/cm2. Compared with direct layer-by-layer assembly of TAT and HA, the postdiffusion of TAT into (PLL/HA 9.5/2.9)5 film was loaded much more peptide. The postdiffusion of peptide into a rapid growth multilayer can be more favorable to load and sustainedly release functional oligo-peptide. The cell culture results indicated that the TAT embedded within the film maintained the ability to traverse across the Hep G2 cell membrane. The functionalized (PLL/HA 9.5/2.9)5 TAT 9.5 film was more efficient than the equivalent amount of free TAT peptide in the TAT uptake test. The postdiffusion of oligo-peptide within an exponential growth multilayer can serve as an effective approach for localized and sustained peptide delivery.

N-Succinyl-chitosan grafted with low molecular weight polyethylenimine as a serum-resistant gene vector

Low transfection efficiency and inactivation by serum are the major drawbacks for cationic polymers when used as non-viral gene vectors. Here, a series of N-succinyl-chitosan-graft-polyethylenimine (NSC-g-PEI) copolymers with different compositions were synthesized through grafting low molecular weight PEI (800 Da) to N-succinyl-chitosan. An agarose gel electrophoresis assay showed NSC-g-PEIs had good binding capability with DNA and the particle size of the NSC-g-PEI-DNA complexes was between 150 to 300 nm as determined by a Zeta sizer. In vitro transfection of NSC-g-PEI-DNA complexes for 293T, HeLa and CHO cells was investigated. It was found that the transfection efficiency of NSC-g-PEI-DNA complexes was higher than that of DNA combined PEI (25 kDa) and the transfection efficiency increased with the increasing GD of PEI. More importantly, the NSC-g-PEI-DNA complexes were stable and the transfection efficiency was not affected obviously in the presence of serum with different concentrations. In addition, NSC-g-PEIs had a lower cytotoxicity than PEI (25 kDa) and the toxicity increased with increasing GD of PEI. The NSC-g-PEI copolymers will have a good potential as efficient non-viral gene vectors in the presence of serum.

Layer-by-layer films as a biomimetic reservoir for rhBMP-2 delivery: controlled differentiation of myoblasts to osteoblasts

Efficient delivery of growth or survival factors to cells is one of the most important long-term challenges of current cell-based tissue engineering strategies. The extracellular matrix acts as a reservoir for a number of growth factors through interactions with its components. In the matrix, growth factors are protected against circulating proteases and locally concentrated. Thus, the localized and long-lasting delivery of a matrix-bound recombinant human bone morphogenetic protein 2 (rhBMP-2) from a biomaterial surface would mimic in vivo conditions and increase BMP-2 efficiency by limiting its degradation. Herein, it is shown that crosslinked poly(L-lysine)/hyaluronan (HA) layer-by-layer films can serve as a reservoir for rhBMP-2 delivery to myoblasts and induce their differentiation into osteoblasts in a dose-dependent manner. The amount of rhBMP-2 loaded in the films is controlled by varying the deposition conditions and the film thickness. Its local concentration in the film is increased up to approximately 500-fold when compared to its initial solution concentration. Its adsorption on the films, as well as its diffusion within the films, is evidenced by microfluorimetry and confocal microscopy observations. A direct interaction of rhBMP-2 with HA is demonstrated by size-exclusion chromatography, which could be at the origin of the rhBMP-2 "trapping" in the film and of its low release from the films. The bioactivity of rhBMP-2-loaded films is due neither to film degradation nor to rhBMP-2 release. The rhBMP-2-containing films are extremely resistant and could sustain three successive culture sequences while remaining bioactive, thus confirming the important and protective effect of rhBMP-2 immobilization. These films may find applications in the local delivery of immobilized growth factors for tissue-engineered constructs and for metallic biomaterial surfaces, as they can be deposited on a wide range of substrates with different shapes, sizes, and composition.

Cellular response to nanoscale elastin-like polypeptide polyelectrolyte multilayers

Ionic elastin-like polypeptide (ELP) conjugates are a new class of biocompatible, self-assembling biomaterials. ELPs composed of the repeat unit (GVGVP)(n) are derived from the primary sequence of mammalian elastin and produced in Escherichia coli. These biopolymers exhibit an inverse transition temperature that renders them extremely useful for applications in cell-sheet engineering. Cationic and anionic conjugates were synthesized by the chemical coupling of ELP to polyethyleneimine (PEI) and polyacrylic acid (PAA). The self-assembly of ELP-PEI and ELP-PAA using the layer-by-layer deposition of alternately charged polyelectrolytes is a simple, versatile technique to generate bioactive and biomimetic surfaces with the ability to modulate cell-substratum interactions. Our studies are focused on cellular response to self-assembled multilayers of ionic (GVGVP)(40) incorporated within the polymeric sequence H(2)N-MVSACRGPG-(GVGVP)(40)-WP-COOH. Angle-dependent XPS studies indicated a difference in the chemical composition at the surface ( approximately 10A below the surface) and subsurface regions. These studies provided additional insight into the growth of the nanoscale multilayer assembly as well as the chemical environment that the cells can sense. Overall, cellular response was enhanced on glass substrata coated with ELP conjugates compared with uncoated surfaces. We report significant differences in cell proliferation, focal adhesions and cytoskeletal organization as a function of the number of bilayers in each assembly. These multilayer assemblies have the potential to be successfully utilized in the rational design of coatings on biomaterials to elicit a desired cellular response.

Biodegradable polycation and plasmid DNA multilayer film for prolonged gene delivery to mouse osteoblasts

Sustained release of functional plasmid DNA from the surfaces of materials which support cell adhesion for tissue formation could have a significant impact on gene therapy and tissue engineering. We report here layer-by-layer assembled multilayer film from a degradable cationic poly(2-aminoethyl propylene phosphate) and plasmid DNA encoding for enhanced green fluorescent protein (EGFP) for mouse osteoblast cell adhesion and prolonged gene delivery. Multilayer film growth was monitored by UV spectrophotometry and intensity of absorbance at 260 nm related to incorporated DNA increased in an exponential manner with increase the number of deposited polymer and plasmid layers. It degraded upon incubation in phosphate-buffered saline (PBS) at 37 degrees C and sustained the release of bioactive plasmid DNA up to 2 months. The multilayer film facilitated initial mouse osteoblast cell adhesion onto the surface and enhanced cellular alkaline phosphatase activity and calcium accumulation. It sustained delivering transcriptional active DNA to mouse osteoblast cells cultured on the film, and directly prolonged gene expression in the presence of serum without any exogenous transfection agent. This biodegradable multilayer assembly is promising for the local and sustained delivery of plasmid DNA and such a layer-by-layer system suggests an alternative method for plasmid DNA incorporation which may be useful for surface modification of implanted materials or scaffold for gene therapy and tissue regeneration.

The influence of polycaprolactone coating on the internalization and cytotoxicity of gold nanoparticles

The interaction between mesoscopic colloids and cells is largely dependent on the particle size and surface properties. Under a mild reaction condition, gold particles with an average diameter of approximately 100 nm were prepared by incubating poly(dimethylsiloxane) film in HAuCl4/acetic acid solution. The particles were then transferred into a polycaprolactone (PCL) film by thermal pressing. Bare and PCL-coated particles were obtained by control over the extent of rinsing. The bare and PCL-coated gold particles were co-cultured with ECV-304 cells to examine the particle internalization and their influence on the cell morphology and cytotoxicity. Transmission electron microcopy observed the subcellular distribution of the gold particles, which were found in the cell compartments (endosomes or lysosomes), cytoplasm, nucleic envelope, and even nucleus regardless of the existence of PCL coating. However, scanning electron microscopy and beta-tubulin staining revealed a significant change in terms of the cell morphology and cytoskeleton caused by the bare gold particles. Higher cytotoxicity was also determined for the bare gold particles. By contrast, no significant difference of the cell morphology and cytoskeleton change was caused by the PCL-coated gold particles, which have also shown lower cytotoxicity.

Surface modification and property analysis of biomedical polymers used for tissue engineering

The response of host organism in macroscopic, cellular and protein levels to biomaterials is, in most cases, closely associated with the materials' surface properties. In tissue engineering, regenerative medicine and many other biomedical fields, surface engineering of the bio-inert synthetic polymers is often required to introduce bioactive species that can promote cell adhesion, proliferation, viability and enhanced ECM-secretion functions. Up to present, a large number of surface engineering techniques for improving biocompatibility have been well established, the work of which generally contains three main steps: (1) surface modification of the polymeric materials; (2) chemical and physical characterizations; and (3) biocompatibility assessment through cell culture. This review focuses on the principles and practices of surface engineering of biomedical polymers with regards to particular aspects depending on the authors' research background and opinions. The review starts with an introduction of principles in designing polymeric biomaterial surfaces, followed by introduction of surface modification techniques to improve hydrophilicity, to introduce reactive functional groups and to immobilize functional protein molecules. The chemical and physical characterizations of the modified biomaterials are then discussed with emphasis on several important issues such as surface functional group density, functional layer thickness, protein surface density and bioactivity. Three most commonly used surface composition characterization techniques, i.e. ATR-FTIR, XPS, SIMS, are compared in terms of their penetration depth. Ellipsometry, CD, EPR, SPR and QCM's principles and applications in analyzing surface proteins are introduced. Finally discussed are frequently applied methods and their principles to evaluate biocompatibility of biomaterials via cell culture. In this section, current techniques and their developments to measure cell adhesion, proliferation, morphology, viability, migration and gene expression are reviewed.

N,N,N-Trimethylchitosan Chloride as a Gene Vector: Synthesis and Application

N,N,N-Trimethylchitosan chloride with different degrees of quaternization has been synthesized and characterized by (1)H NMR spectroscopy. The particle size ranges from 150 to 600 nm, which is dependent on the N/P ratio and is less influenced by the degree of quaternization. The majority of the particles have a spherical morphology. The zeta potential of the particles increases with the N/P ratio and the quaternization degree of TMC. Short-term contact experiments show good biocompatibility of TMC, but long-term contact experiments reveal its high toxicity. This study suggests that TMC is a promising gene carrier, but further modification is still required to improve its cytocompatibility.