Versatile and Selective Synthesis of “Click Chemistry” Compatible Heterobifunctional Poly(ethylene glycol)s Possessing Azide and Alkyne Functionalities

Chemoselectivity Streamlines the Approach to Linear and Y-Shaped Thiol-Polyethers Starting from Thiocarboxylic Acids

Thiol-functionalized polyethers, especially poly(ethylene oxide) (PEO), have extensive applications in biomedicine and materials sciences. Herein, we report a simple one-pot synthesis of α-thiol-ω-hydroxyl polyethers through ring-opening polymerization (ROP) of epoxides using thiocarboxylic acid initiators followed by in situ aminolysis. The efficient and chemoselective metal-free Lewis pair catalyst avoids transthioesterification thus achieving well-controlled molar mass, low dispersity, and high end-group fidelity. Kinetic and calculation results demonstrated a fast-initiation mode of the ROP for the strong nucleophilicity of the thiocarboxylate anion and its weak interaction with Lewis acid. The method is expanded for α-thiol-ω-dihydroxyl (Y-shaped) PEO by virtue of the stability of thioester during the ROP. The thiol functionality in linear/Y-shaped PEO is further corroborated by the intensified interaction with gold surface and the resultant protein resistance behavior.

Noncovalent Protection for Direct Synthesis of α-Amino-ω-hydroxyl Poly(ethylene oxide)

The synthesis of poly(ethylene oxide) (PEO) with amino end group, a key functionality for PEGylation, is a long-standing challenge. Multistep routes based on postmodification or covalent protection have been adopted to circumvent ethoxylation of the amino group by ethylene oxide (EO). Here, we report a noncovalent protection strategy for one-step synthesis of PEO amine. An amino (di)alcohol is mixed with a small amount of mild phosphazene base and excess triethylborane (Et₃B) before addition of EO. The complexation of the amino group with Et₃B guarantees that polymerization of EO occurs selectively from the hydroxyl group through the bicomponent metal-free catalysis. Simply by precipitation in diethyl ether, the protective Et₃B as well as the catalyst can be removed to afford α-amino-ω-hydroxyl PEO with controlled molar mass, low dispersity, and complete end functionality. The effect of initiator structure and retention of Et₃B on the storage (oxidative) stability of PEO amine is also revealed.

Tuneable peptide cross-linked nanogels for enzyme-triggered protein delivery

Many diseases are associated with the dysregulated activity of enzymes, such as matrix metalloproteinases (MMPs). This dysregulation can be leveraged in drug delivery to achieve disease- or site-specific cargo release. Self-assembled polymeric nanoparticles are versatile drug carrier materials due to the accessible diversity of polymer chemistry. However, efficient loading of sensitive cargo, such as proteins, and introducing functional enzyme-responsive behaviour remain challenging. Herein, peptide-crosslinked, temperature-sensitive nanogels for protein delivery were designed to respond to MMP-7, which is overexpressed in many pathologies including cancer and inflammatory diseases. The incorporation of N-cyclopropylacrylamide (NCPAM) into N-isopropylacrylamide (NIPAM)-based copolymers enabled us to tune the polymer lower critical solution temperature from 33 to 44 °C, allowing the encapsulation of protein cargo and nanogel-crosslinking at slightly elevated temperatures. This approach resulted in nanogels that were held together by MMP-sensitive peptides for enzyme-specific protein delivery. We employed a combination of cryogenic transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS), small angle neutron scattering (SANS), and fluorescence correlation spectroscopy (FCS) to precisely decipher the morphology, self-assembly mechanism, enzyme-responsiveness, and model protein loading/release properties of our nanogel platform. Simple variation of the peptide linker sequence and combining multiple different crosslinkers will enable us to adjust our platform to target specific diseases in the future.

Selective polymerization of epoxides from hydroxycarboxylic esters: expediting controlled synthesis of α-carboxyl-ω-hydroxyl polyethers

Selective ring-opening polymerization of ethylene/propylene oxide from hydroxyl-functionalized carboxylic esters is achieved by use of metal-free Lewis pair catalysts. Subsequently, quantitative in situ hydrolysis is conducted to afford well-defined α-carboxyl-ω-hydroxyl polyethers which are highly valuable for bioconjugation but usually synthesized by much more tedious and costly routes.

Insights into the Photodecomposition of Azidomethyl Methyl Sulfide: A S2/S1 Conical Intersection on Nitrene Potential Energy Surfaces Leading to the Formation of S-Methyl-N-sulfenylmethanimine

UV photodecomposition of azidomethyl methyl sulfide (AMMS) yields a transient S-methylthiaziridine which rapidly evolves to S-methyl-N-sulfenylmethanimine at 10 K. This species was detected by infrared matrix isolation spectroscopy. The mechanism of the photoreaction of AMMS has been investigated by a combined approach, using low-temperature matrix isolation FTIR spectroscopy in conjunction with two theoretical methods, namely, complete active space self-consistent field and multiconfigurational second-order perturbation. The key step of the reaction is governed by a S₂/S₁ conical intersection localized in the neighborhood of the singlet nitrene minimum which is formed in the first reaction step of the photolysis, that is, N₂ elimination from AMMS. Full assignment of the observed infrared spectra of AMMS has been carried out based on comparison with density functional theory and second-order perturbation Møller-Plesset methods.

Tuned Density of Anti-Tissue Factor Antibody Fragment onto siRNA-Loaded Polyion Complex Micelles for Optimizing Targetability into Pancreatic Cancer Cells

Antibody fragment (Fab')-installed polyion complex (PIC) micelles were constructed to improve targetability of small interfering RNA (siRNA) delivery to pancreatic cancer cells. To this end, we synthesized a block copolymer of azide-functionalized poly(ethylene glycol) and poly(l-lysine) and prepared PIC micelles with siRNA. Then, a dibenzylcyclooctyne (DBCO)-modified antihuman tissue factor (TF) Fab' was conjugated to azido groups on the micellar surface. A fluorescence correlation spectroscopic analysis revealed that 1, 2, or 3 molecule(s) of Fab'(s) were installed onto one micellar nanoparticle according to the feeding ratio of Fab' (or DBCO) to micelle (or azide). The resulting micelles exhibited ∼40 nm in hydrodynamic diameter, similar to that of the parent micelles before Fab' conjugation. Flow cytometric analysis showed that three molecules of Fab'-installed PIC micelles (3(Fab')-micelles) had the highest binding affinity to cultured pancreatic cancer BxPC3 cells, which are known to overexpress TF on their surface. The 3(Fab')-micelles also exhibited the most efficient gene silencing activity against polo-like kinase 1 mRNA in the cultured cancer cells. Furthermore, the 3(Fab')-micelles exhibited high penetrability and the highest cellular internalization amounts in BxPC3 spheroids compared with one or two molecule(s) of Fab'-installed PIC micelles. These results demonstrate the potential of anti-TF Fab'-installed PIC micelles for active targeting of stroma-rich pancreatic tumors.

Synthesis and facile end-group quantification of functionalized PEG azides

Azido-functionalized poly(ethylene glycol) (PEG) derivatives are finding ever-increasing applications in the areas of conjugation chemistry and targeted drug delivery by their judicious incorporation into nanoparticle-forming polymeric systems. Quantification of azide incorporation into such PEG polymers is essential to their effective use. 1H Nuclear Magnetic Resonance (NMR) analysis offers the simplest approach; however, the relevant adjacent azide-bearing methylene protons are often obscured by the PEG manifold signals. This study describes the synthesis of 1,2,3-triazole adducts from their corresponding PEG azides via a convenient, mild click reaction, which facilitates straightforward NMR-based quantitative end-group analysis.This method was found to be compatible with many examples of bifunctional azido PEGs with molecular weights ranging from 2 to 18 kDa bearing a variety of functional groups. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 2888-2895.

A Nanoparticle Platform To Evaluate Bioconjugation and Receptor-Mediated Cell Uptake Using Cross-Linked Polyion Complex Micelles Bearing Antibody Fragments

Targeted nanomedicines are a promising technology for treatment of disease; however, preparation and characterization of well-defined protein-nanoparticle systems remain challenging. Here, we describe a platform technology to prepare antibody binding fragment (Fab)-bearing nanoparticles and an accompanying real-time cell-based assay to determine their cellular uptake compared to monoclonal antibodies (mAbs) and Fabs. The nanoparticle platform was composed of core-cross-linked polyion complex (PIC) micelles prepared from azide-functionalized PEG-b-poly(amino acids), that is, azido-PEG-b-poly(l-lysine) [N3-PEG-b-PLL] and azido-PEG-b-poly(aspartic acid) [N3-PEG-b-PAsp]. These PIC micelles were 30 nm in size and contained approximately 10 polymers per construct. Fabs were derived from an antibody binding the EphA2 receptor expressed on cancer cells and further engineered to contain a reactive cysteine for site-specific attachment and a cleavable His tag for purification from cell culture expression systems. Azide-functionalized micelles and thiol-containing Fab were linked using a heterobifunctional cross-linker (FPM-PEG4-DBCO) that contained a fluorophenyl-maleimide for stable conjugation to Fabs thiols and a strained alkyne (DBCO) group for coupling to micelle azide groups. Analysis of Fab-PIC micelle conjugates by fluorescence correlation spectroscopy, size exclusion chromatography, and UV-vis absorbance determined that each nanoparticle contained 2-3 Fabs. Evaluation of cellular uptake in receptor positive cancer cells by real-time fluorescence microscopy revealed that targeted Fab-PIC micelles achieved higher cell uptake than mAbs and Fabs, demonstrating the utility of this approach to identify targeted nanoparticle constructs with unique cellular internalization properties.

Coupling Gd‑DTPA with a bispecific, recombinant protein anti‑EGFR‑iRGD complex improves tumor targeting in MRI

Recombinant anti-epidermal growth factor receptor-internalizing arginine-glycine-aspartic acid (anti-EGFR single-domain antibody fused with iRGD peptide) protein efficiently targets the EGFR extracellular domain and integrin αvβ/β5, and shows a high penetration into cells. Thus, this protein may improve penetration of conjugated drugs into the deep zone of gastric cancer multicellular 3D spheroids. In the present study, a novel tumor-targeting contrast agent for magnetic resonance imaging (MRI) was developed, by coupling gadolinium-diethylene triamine pentaacetate (Gd-DTPA) with the bispecific recombinant anti-EGFR-iRGD protein. The anti-EGFR-iRGD protein was extracted from Escherichia coli and Gd was loaded onto the recombinant protein by chelation using DTPA anhydride. Single-targeting agent anti-EGFR-DTPA-Gd, which served as the control, was also prepared. The results of the present study showed that anti-EGFR-iRGD-DTPA-Gd exhibited no significant cyto toxicity to human gastric carcinoma cells (BGC-823) under the experimental conditions used. Compared with a conventional contrast agent (Magnevist), anti-EGFR-iRGD-DTPA-Gd showed higher T1 relaxivity (10.157/mM/sec at 3T) and better tumor-targeting ability. In addition, the signal intensity and the area under curve for the enhanced signal time in tumor, in vivo, were stronger than Gd-DTPA alone or the anti-EGFR-Gd control. Thus, Gd-labelled anti-EGFR-iRGD has potential as a tumor-targeting contrast agent for improved MRI.

Azide-based heterobifunctional poly(ethylene oxide)s: NaN3-initiated “living” polymerization of ethylene oxide and chain end functionalizations

Sodium azide (NaN₃)-initiated “living” ring-opening polymerization of ethylene oxide and chain end functionalizations.

Polymerization of Ethylene Oxide, Propylene Oxide, and Other Alkylene Oxides: Synthesis, Novel Polymer Architectures, and Bioconjugation

The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazene bases. In addition, the commercially relevant double-metal cyanide (DMC) catalyst systems are discussed. Besides the synthetic progress, new types of multifunctional linear PEG (mf-PEG) and PPO structures accessible by copolymerization of EO or PO with functional epoxide comonomers are presented as well as complex branched, hyperbranched, and dendrimer like polyethers. Amphiphilic block copolymers based on PEO and PPO (Poloxamers and Pluronics) and advances in the area of PEGylation as the most important bioconjugation strategy are also summarized. With the ever growing toolbox for epoxide polymerization, a "polyether universe" may be envisaged that in its structural diversity parallels the immense variety of structural options available for polymers based on vinyl monomers with a purely carbon-based backbone.

Tuning multiple arms for camptothecin and folate conjugations on star-shaped copolymers to enhance glutathione-mediated intracellular drug delivery

Multiarmed amphiphilic copolymers with drug conjugated were developed, and the composition and structure of the star-shaped miktoarms show significant effects on micelle behavior and antitumor activities.

Folate-decorated and reduction-sensitive micelles assembled from amphiphilic polymer-camptothecin conjugates for intracellular drug delivery

It is one of the challenges for a wide clinical application of polymer micelles to address the structure disintegration and premature drug release before reaching a pathological site. In the current study, folic acid (FA)-decorated polymer-drug conjugates (FSC) were synthesized with disulfide linkages between camptothecin (CPT) and amphiphilic poly(ethylene glycol)-b-poly(ε-caprolactone) (PECL) copolymers. FSC conjugates were proposed to assemble into micelles with a hydrophobic core of PCL segments and CPT and a hydrophilic corona of PEG segments. The addition of hexadecanol during micelle formation (FSC-16) was proposed to modulate the interactions of hydrophobic segments in micelles and enhance the reductive sensitivity. FSC-16 micelles were obtained with critical micelle concentration of around 2 μg/mL and an average size of around 200 nm, and the conjugated CPT was rapidly released out in response to glutathione. The reductive sensitivity was also demonstrated with respect to the changes of micelle size and morphologies as well as the fluorescent intensity of pyrene loaded in micelles. Benefiting from the FA receptor-mediated uptake and the reduction-sensitive release of CPT, significant cytotoxicity and cell apoptosis were identified for FSC-16 micelles against SKOV-3 cells with strong expressions of FA receptors. Flow cytometry and confocal laser scanning microscopy analyses demonstrated that CPT was distributed into nuclei after cellular uptake and intracellular release from FSC-16 micelles. Thus, the FA-decorated and reduction-sensitive micelles assembled from polymer-drug conjugates show advantages in inhibiting premature release during circulation, enhancing cellular uptake at the tumor tissues, and promoting intracellular release and nuclei location of the active moieties.

A versatile stable platform for multifunctional applications: synthesis of a nitroDOPA–PEO–alkyne scaffold for iron oxide nanoparticles

A simple but powerful design of contemporary magnetic nanoparticle composites for biomedical applications.

Efficient synthesis of diverse heterobifunctionalized clickable oligo(ethylene glycol) linkers: potential applications in bioconjugation and targeted drug delivery

Herein we describe the sequential synthesis of a variety of azide-alkyne click chemistry-compatible heterobifunctional oligo(ethylene glycol) (OEG) linkers for bioconjugation chemistry applications. Synthesis of these bioorthogonal linkers was accomplished through desymmetrization of OEGs by conversion of one of the hydroxyl groups to either an alkyne or azido functionality. The remaining distal hydroxyl group on the OEGs was activated by either a 4-nitrophenyl carbonate or a mesylate (-OMs) group. The -OMs functional group served as a useful precursor to form a variety of heterobifunctionalized OEG linkers containing different highly reactive end groups, e.g., iodo, -NH(2), -SH and maleimido, that were orthogonal to the alkyne or azido functional group. Also, the alkyne- and azide-terminated OEGs are useful for generating larger discrete poly(ethylene glycol) (PEG) linkers (e.g., PEG(16) and PEG(24)) by employing a Cu(I)-catalyzed 1,3-dipolar cycloaddition click reaction. The utility of these clickable heterobifunctional OEGs in bioconjugation chemistry was demonstrated by attachment of the integrin (α(v)β(3)) receptor targeting peptide, cyclo-(Arg-Gly-Asp-D-Phe-Lys) (cRGfKD) and to the fluorescent probe sulfo-rhodamine B. The synthetic methodology presented herein is suitable for the large scale production of several novel heterobifunctionalized OEGs from readily available and inexpensive starting materials.

Ultralow protein adsorbing coatings from clickable PEG nanogel solutions: benefits of attachment under salt-induced phase separation conditions and comparison with PEG/albumin nanogel coatings

Clickable nanogel solutions were synthesized by using the copper catalyzed azide/alkyne cycloaddition (CuAAC) to partially polymerize solutions of azide and alkyne functionalized poly(ethylene glycol) (PEG) monomers. Coatings were fabricated using a second click reaction: a UV thiol-yne attachment of the nanogel solutions to mercaptosilanated glass. Because the CuAAC reaction was effectively halted by the addition of a copper-chelator, we were able to prevent bulk gelation and limit the coating thickness to a single monolayer of nanogels in the absence of the solution reaction. This enabled the inclusion of kosmotropic salts, which caused the PEG to phase-separate and nearly double the nanogel packing density, as confirmed by quartz crystal microbalance with dissipation (QCM-D). Protein adsorption was analyzed by single molecule counting with total internal reflection fluorescence (TIRF) microscopy and cell adhesion assays. Coatings formed from the phase-separated clickable nanogel solutions attached with salt adsorbed significantly less fibrinogen than other 100% PEG coatings tested, as well as poly(L-lysine)-g-PEG (PLL-g-PEG) coatings. However, PEG/albumin nanogel coatings still outperformed the best 100% PEG clickable nanogel coatings. Additional surface cross-linking of the clickable nanogel coating in the presence of copper further reduced levels of fibrinogen adsorption closer to those of PEG/albumin nanogel coatings. However, this step negatively impacted long-term resistance to cell adhesion and dramatically altered the morphology of the coating by atomic force microscopy (AFM). The main benefit of the click strategy is that the partially polymerized solutions are stable almost indefinitely, allowing attachment in the phase-separated state without danger of bulk gelation, and thus producing the best performing 100% PEG coating that we have studied to date.

The effect of hydrophilic chain length and iRGD on drug delivery from poly(ε-caprolactone)-poly(N-vinylpyrrolidone) nanoparticles

Poly(ε-caprolactone)-b-Poly(N-vinylpyrrolidone) (PCL-b-PVP) copolymers with different PVP block length were synthesized by xanthate-mediated reverse addition fragment transfer polymerization (RAFT) and the xanthate chain transfer agent on chain end was readily translated to hydroxy or aldehyde for conjugating various functional moieties, such as fluorescent dye, biotin hydrazine and tumor homing peptide iRGD. Thus, PCL-PVP nanoparticles were prepared by these functionalized PCL-b-PVP copolymers. Furthermore, paclitaxel-loaded PCL-PVP nanoparticles with satisfactory drug loading content (15%) and encapsulation efficiency (>90%) were obtained and used in vitro and in vivo antitumor examination. It was demonstrated that the length of PVP block had a significant influence on cytotoxicity, anti-BSA adsorption, circulation time, stealth behavior, biodistribution and antitumor activity for the nanoparticles. iRGD on PCL-PVP nanoparticle surface facilitated the nanoparticles to accumulate in tumor site and enhanced their penetration in tumor tissues, both of which improved the efficacy of paclitaxel-loaded nanoparticles in impeding tumor growth and prolonging the life time of H22 tumor-bearing mice.