Electron paramagnetic resonance analysis of different Azotobacter vinelandii nitrogenase MoFe-protein conformations generated during enzyme turnover: evidence for S = 3/2 spin states from reduced MoFe-protein intermediates

Analysis of early intermediate states of the nitrogenase reaction by regularization of EPR spectra

Due to the complexity of the catalytic FeMo cofactor site in nitrogenases that mediates the reduction of molecular nitrogen to ammonium, mechanistic details of this reaction remain under debate. In this study, selenium- and sulfur-incorporated FeMo cofactors of the catalytic MoFe protein component from Azotobacter vinelandii are prepared under turnover conditions and investigated by using different EPR methods. Complex signal patterns are observed in the continuous wave EPR spectra of selenium-incorporated samples, which are analyzed by Tikhonov regularization, a method that has not yet been applied to high spin systems of transition metal cofactors, and by an already established grid-of-error approach. Both methods yield similar probability distributions that reveal the presence of at least four other species with different electronic structures in addition to the ground state E0. Two of these species were preliminary assigned to hydrogenated E2 states. In addition, advanced pulsed-EPR experiments are utilized to verify the incorporation of sulfur and selenium into the FeMo cofactor, and to assign hyperfine couplings of 33S and 77Se that directly couple to the FeMo cluster. With this analysis, we report selenium incorporation under turnover conditions as a straightforward approach to stabilize and analyze early intermediate states of the FeMo cofactor.

Cryo-annealing of Photoreduced CdS Quantum Dot-Nitrogenase MoFe Protein Complexes Reveals the Kinetic Stability of the E4(2N2H) Intermediate

A critical step in the mechanism of N2 reduction to 2NH3 catalyzed by the enzyme nitrogenase is the reaction of the four-electron/four-proton reduced intermediate state of the active-site FeMo-cofactor (E4(4H)). This state is a junction in the catalytic mechanism, either relaxing by the reaction of a metal bound Fe-hydride with a proton forming H2 or going forward with N2 binding coupled to the reductive elimination (re) of two Fe-hydrides as H2 to form the E4(2N2H) state. E4(2N2H) can relax to E4(4H) by the oxidative addition (oa) of H2 and release of N2 or can be further reduced in a series of catalytic steps to release 2NH3. If the H2 re/oa mechanism is correct, it requires that oa of H2 be associative with E4(2N2H). In this report, we have taken advantage of CdS quantum dots in complex with MoFe protein to achieve photodriven electron delivery in the frozen state, with cryo-annealing in the dark, to reveal details of the E-state species and to test the stability of E4(2N2H). Illumination of frozen CdS:MoFe protein complexes led to formation of a population of reduced intermediates. Electron paramagnetic resonance spectroscopy identified E-state signals including E2 and E4(2N2H), as well as signals suggesting the formation of E6 or E8. It is shown that in the frozen state when pN2 is much greater than pH2, the E4(2N2H) state is kinetically stable, with very limited forward or reverse reaction rates. These results establish that the oa of H2 to the E4(2N2H) state follows an associative reaction mechanism.

The E3 state of FeMoco: one hydride, two hydrides or dihydrogen?

Hydrides are present in the reduced states of the iron-molybdenum cofactor (FeMoco) of Mo nitrogenase and are believed to play a key mechanistic role in the dinitrogen reduction reaction catalyzed by the enzyme. Two hydrides are present in the E4 state according to 1H ENDOR and there is likely a single hydride in the E2 redox state. The 2-hydride E4 state has been experimentally observed to bind N2 and it has been speculated that E3 may bind N2 as well. However, the E3 state has not been directly observed and very little is known about its molecular and electronic structure or reactivity. In recent computational studies, we have explored the energy surfaces of the E2 and E4 by QM/MM modelling, and found that the most stable hydride isomers contain bridging or partially bridging hydrides with an open protonated belt sulfide-bridge. In this work we systematically explore the energy surface of the E3 redox state, comparing single hydride and two-hydride isomers with varying coordination and bridging vs. terminal sulfhydryl groups. We also include a model featuring a triply protonated carbide. The results are only mildly dependent on the QM-region size. The three most stable E3 isomers at the r2SCAN level of theory have in common: an open belt sulfide-bridge (terminal sulfhydryl group on Fe6) and either 2 bridging hydrides (between Fe2 and Fe6), 1 bridging-1-terminal hydride (around Fe2 and Fe6) or a dihydrogen ligand bound at the Fe2 site. Analyzing the functional dependency of the results, we find that functionals previously found to predict accurate structures of spin-coupled Fe/Mo dimers and FeMoco (TPSSh, B97-D3, r2SCAN, and B3LYP*) are in generally good agreement about the stability of these 3 E3 isomers. However, B3LYP*, similar to its parent B3LYP method, predicts a triply protonated carbide isomer as the most stable isomer, an unlikely scenario in view of the lack of experimental evidence for carbide protonation occurring in reduced FeMoco states. Distinguishing further between the 3 hydride isomers is difficult and this flexible coordination nature of hydrides suggests that multiple hydride isomers could be present during experimental conditions. N2 binding was explored and resulted in geometries with 2 bridging hydrides and N2 bound to either Fe2 or Fe6 with a local low-spin state on the Fe. N2 binding is predicted to be mildly endothermic, similar to the E2 state, and it seems unlikely that the E3 state is capable of binding N2.

Biological nitrogen fixation in theory, practice, and reality: a perspective on the molybdenum nitrogenase system

Nitrogenase is the sole enzyme responsible for the ATP-dependent conversion of atmospheric dinitrogen into the bioavailable form of ammonia (NH₃ ), making this protein essential for the maintenance of the nitrogen cycle and thus life itself. Despite the widespread use of the Haber-Bosch process to industrially produce NH₃ , biological nitrogen fixation still accounts for half of the bioavailable nitrogen on Earth. An important feature of nitrogenase is that it operates under physiological conditions, where the equilibrium strongly favours ammonia production. This biological, multielectron reduction is a complex catalytic reaction that has perplexed scientists for decades. In this review, we explore the current understanding of the molybdenum nitrogenase system based on experimental and computational research, as well as the limitations of the crystallographic, spectroscopic, and computational techniques employed. Finally, essential outstanding questions regarding the nitrogenase system will be highlighted alongside suggestions for future experimental and computational work to elucidate this essential yet elusive process.

Defining Intermediates of Nitrogenase MoFe Protein during N2 Reduction under Photochemical Electron Delivery from CdS Quantum Dots

Coupling the nitrogenase MoFe protein to light-harvesting semiconductor nanomaterials replaces the natural electron transfer complex of Fe protein and ATP and provides low-potential photoexcited electrons for photocatalytic N₂ reduction. A central question is how direct photochemical electron delivery from nanocrystals to MoFe protein is able to support the multielectron ammonia production reaction. In this study, low photon flux conditions were used to identify the initial reaction intermediates of CdS quantum dot (QD):MoFe protein nitrogenase complexes under photochemical activation using EPR. Illumination of CdS QD:MoFe protein complexes led to redox changes in the MoFe protein active site FeMo-co observed as the gradual decline in the E₀ resting state intensity that was accompanied by an increase in the intensity of a new "g_eff = 4.5" EPR signal. The magnetic properties of the g_eff = 4.5 signal support assignment as a reduced S = 3/2 state, and reaction modeling was used to define it as a two-electron-reduced "E₂" intermediate. Use of a MoFe protein variant, β-188^Cys, which poises the P cluster in the oxidized P⁺ state, demonstrated that the P cluster can function as a site of photoexcited electron delivery from CdS to MoFe protein. Overall, the results establish the initial steps for how photoexcited CdS delivers electrons into the MoFe protein during reduction of N₂ to ammonia and the role of electron flux in the photochemical reaction cycle.

The Spectroscopy of Nitrogenases

Nitrogenases are responsible for biological nitrogen fixation, a crucial step in the biogeochemical nitrogen cycle. These enzymes utilize a two-component protein system and a series of iron-sulfur clusters to perform this reaction, culminating at the FeMco active site (M = Mo, V, Fe), which is capable of binding and reducing N2 to 2NH3. In this review, we summarize how different spectroscopic approaches have shed light on various aspects of these enzymes, including their structure, mechanism, alternative reactivity, and maturation. Synthetic model chemistry and theory have also played significant roles in developing our present understanding of these systems and are discussed in the context of their contributions to interpreting the nature of nitrogenases. Despite years of significant progress, there is still much to be learned from these enzymes through spectroscopic means, and we highlight where further spectroscopic investigations are needed.

Reduction of Substrates by Nitrogenases

Nitrogenase is the enzyme that catalyzes biological N₂ reduction to NH₃. This enzyme achieves an impressive rate enhancement over the uncatalyzed reaction. Given the high demand for N₂ fixation to support food and chemical production and the heavy reliance of the industrial Haber-Bosch nitrogen fixation reaction on fossil fuels, there is a strong need to elucidate how nitrogenase achieves this difficult reaction under benign conditions as a means of informing the design of next generation synthetic catalysts. This Review summarizes recent progress in addressing how nitrogenase catalyzes the reduction of an array of substrates. New insights into the mechanism of N₂ and proton reduction are first considered. This is followed by a summary of recent gains in understanding the reduction of a number of other nitrogenous compounds not considered to be physiological substrates. Progress in understanding the reduction of a wide range of C-based substrates, including CO and CO₂, is also discussed, and remaining challenges in understanding nitrogenase substrate reduction are considered.

Rethinking the Nitrogenase Mechanism: Activating the Active Site

Metalloenzymes called nitrogenases (N₂ases) harness the reactivity of transition metals to reduce N₂ to NH₃. Specifically, N₂ases feature a multimetallic active site, called a cofactor, which binds and reduces N₂. The seven Fe centers and one additional metal center (Mo, V, or Fe) that make up the cofactor are all potential substrate binding sites. Unraveling the mechanism by which the cofactor binds N₂ and reduces N₂ to NH₃ represents a multifaceted challenge because cofactor activation is required for N₂ binding and functionalization to NH₃. Despite decades of fascinating contributions, the nature of N₂ binding to the active site and the structure of the activated cofactor remain unknown. Herein, we discuss the challenges associated with N₂ reduction and how transition metal complexes facilitate N₂ functionalization by coordinating N₂. We also review the activation and/or reaction mechanisms reported for small molecule catalysts and the Haber-Bosch catalyst and discuss their potential relevance to biological N₂ fixation. Finally, we survey what is known about the mechanism of N₂ase and highlight recent X-ray crystallographic studies supporting Fe-S bond cleavage at the active site to generate reactive Fe centers as a potential, underexplored route for cofactor activation. We propose that structural rearrangements, beyond electron and proton transfers, are key in generating the catalytically active state(s) of the cofactor. Understanding the mechanism of activation will be key to understanding N₂ binding and reduction.

Hydride Conformers of the Nitrogenase FeMo-cofactor Two-Electron Reduced State E2(2H), Assigned Using Cryogenic Intra Electron Paramagnetic Resonance Cavity Photolysis

Early studies in which nitrogenase was freeze-trapped during enzymatic turnover revealed the presence of high-spin ( S = ³/₂) electron paramagnetic resonance (EPR) signals from the active-site FeMo-cofactor (FeMo-co) in electron-reduced intermediates of the MoFe protein. Historically denoted as 1b and 1c, each of the signals is describable as a fictitious spin system, S' = ¹/₂, with anisotropic g' tensor, 1b with g' = [4.21, 3.76, ?] and 1c with g' = [4.69, ∼3.20, ?]. A clear discrepancy between the magnetic properties of 1b and 1c and the kinetic analysis of their appearance during pre-steady-state turnover left their identities in doubt, however. We subsequently associated 1b with the state having accumulated 2[e^-/H⁺], denoted as E₂(2H), and suggested that the reducing equivalents are stored on the catalytic FeMo-co cluster as an iron hydride, likely an [Fe-H-Fe] hydride bridge. Intra-EPR cavity photolysis (450 nm; temperature-independent from 4 to 12 K) of the E₂(2H)/1b state now corroborates the identification of this state as storing two reducing equivalents as a hydride. Photolysis converts E₂(2H)/1b to a state with the same EPR spectrum, and thus the same cofactor structure as pre-steady-state turnover 1c, but with a different active-site environment. Upon annealing of the photogenerated state at temperature T = 145 K, it relaxes back to E₂(2H)/1b. This implies that the 1c signal comes from an E₂(2H) hydride isomer of E₂(2H)/1b that stores its two reducing equivalents either as a hydride bridge between a different pair of iron atoms or an Fe-H terminal hydride.

Negative cooperativity in the nitrogenase Fe protein electron delivery cycle

Nitrogenase catalyzes the ATP-dependent reduction of dinitrogen (N₂) to two ammonia (NH₃) molecules through the participation of its two protein components, the MoFe and Fe proteins. Electron transfer (ET) from the Fe protein to the catalytic MoFe protein involves a series of synchronized events requiring the transient association of one Fe protein with each αβ half of the α₂β₂ MoFe protein. This process is referred to as the Fe protein cycle and includes binding of two ATP to an Fe protein, association of an Fe protein with the MoFe protein, ET from the Fe protein to the MoFe protein, hydrolysis of the two ATP to two ADP and two P_i for each ET, P_i release, and dissociation of oxidized Fe protein-(ADP)₂ from the MoFe protein. Because the MoFe protein tetramer has two separate αβ active units, it participates in two distinct Fe protein cycles. Quantitative kinetic measurements of ET, ATP hydrolysis, and P_i release during the presteady-state phase of electron delivery demonstrate that the two halves of the ternary complex between the MoFe protein and two reduced Fe protein-(ATP)₂ do not undergo the Fe protein cycle independently. Instead, the data are globally fit with a two-branch negative-cooperativity kinetic model in which ET in one-half of the complex partially suppresses this process in the other. A possible mechanism for communication between the two halves of the nitrogenase complex is suggested by normal-mode calculations showing correlated and anticorrelated motions between the two halves.

Reversible Protonated Resting State of the Nitrogenase Active Site

Protonated states of the nitrogenase active site are mechanistically significant since substrate reduction is invariably accompanied by proton uptake. We report the low pH characterization by X-ray crystallography and EPR spectroscopy of the nitrogenase molybdenum iron (MoFe) proteins from two phylogenetically distinct nitrogenases (Azotobacter vinelandii, Av, and Clostridium pasteurianum, Cp) at pHs between 4.5 and 8. X-ray data at pHs of 4.5–6 reveal the repositioning of side chains along one side of the FeMo-cofactor, and the corresponding EPR data shows a new S = 3/2 spin system with spectral features similar to a state previously observed during catalytic turnover. The structural changes suggest that FeMo-cofactor belt sulfurs S3A or S5A are potential protonation sites. Notably, the observed structural and electronic low pH changes are correlated and reversible. The detailed structural rearrangements differ between the two MoFe proteins, which may reflect differences in potential protonation sites at the active site among nitrogenase species. These observations emphasize the benefits of investigating multiple nitrogenase species. Our experimental data suggest that reversible protonation of the resting state is likely occurring, and we term this state “E₀H⁺”, following the Lowe–Thorneley naming scheme.

Exploring Electron/Proton Transfer and Conformational Changes in the Nitrogenase MoFe Protein and FeMo-cofactor Through Cryoreduction/EPR Measurements

We combine cryoreduction/annealing/EPR measurements of nitrogenase MoFe protein with results of earlier investigations to provide a detailed view of the electron/proton transfer events and conformational changes that occur during early stages of [e^-/H⁺] accumulation by the MoFe protein. This includes reduction of (i) the non-catalytic state of the iron-molybdenum cofactor (FeMo-co) active site that is generated by chemical oxidation of the resting-state cofactor (S = 3/2)) within resting MoFe (E₀), and (ii) the catalytic state that has accumulated n =1 [e^-/H⁺] above the resting-state level, denoted E₁(1H) (S ≥ 1) in the Lowe-Thorneley kinetic scheme. FeMo-co does not undergo a major change of conformation during reduction of oxidized FeMo-co. In contrast, FeMo-co undergoes substantial conformational changes during the reduction of E₀ to E₁(1H), and of E₁(1H) to E₂(2H) (n = 2; S = 3/2). The experimental results further suggest that the E₁(1H) → E₂(2H) step involves coupled delivery of a proton and electron (PCET) to FeMo-co of E₁(H) to generate a non-equilibrium S = ½ form E₂(2H)*. This subsequently undergoes conformational relaxation and attendant change in FeMo-co spin state, to generate the equilibrium E₂(2H) (S = 3/2) state. Unexpectedly, these experiments also reveal conformational coupling between FeMo-co and P-cluster, and between Fe protein binding and FeMo-co, which might play a role in gated ET from reduced Fe protein to FeMo-co.

Evidence for Functionally Relevant Encounter Complexes in Nitrogenase Catalysis

Nitrogenase is the only enzyme that can convert atmospheric dinitrogen (N2) into biologically usable ammonia (NH3). To achieve this multielectron redox process, the nitrogenase component proteins, MoFe-protein (MoFeP) and Fe-protein (FeP), repeatedly associate and dissociate in an ATP-dependent manner, where one electron is transferred from FeP to MoFeP per association. Here, we provide experimental evidence that encounter complexes between FeP and MoFeP play a functional role in nitrogenase catalysis. The encounter complexes are stabilized by electrostatic interactions involving a positively charged patch on the β-subunit of MoFeP. Three single mutations (βAsn399Glu, βLys400Glu, and βArg401Glu) in this patch were generated in Azotobacter vinelandii MoFeP. All of the resulting variants displayed decreases in specific catalytic activity, with the βK400E mutation showing the largest effect. As simulated by the Thorneley-Lowe kinetic scheme, this single mutation lowered the rate constant for FeP-MoFeP association 5-fold. We also found that the βK400E mutation did not affect the coupling of ATP hydrolysis with electron transfer (ET) between FeP and MoFeP. These data suggest a mechanism where FeP initially forms encounter complexes on the MoFeP β-subunit surface en route to the ATP-activated, ET-competent complex over the αβ-interface.

A confirmation of the quench-cryoannealing relaxation protocol for identifying reduction states of freeze-trapped nitrogenase intermediates

We have advanced a mechanism for nitrogenase catalysis that rests on the identification of a low-spin EPR signal (S = 1/2) trapped during turnover of a MoFe protein as the E4 state, which has accumulated four reducing equivalents as two [Fe-H-Fe] bridging hydrides. Because electrons are delivered to the MoFe protein one at a time, with the rate-limiting step being the off-rate of oxidized Fe protein, it is difficult to directly control, or know, the degree of reduction, n, of a trapped intermediate, denoted En, n = 1-8. To overcome this previously intractable problem, we introduced a quench-cryoannealing relaxation protocol for determining n of an EPR-active trapped En turnover state. The trapped "hydride" state was allowed to relax to the resting E0 state in frozen medium, which prevents additional accumulation of reducing equivalents; binding of reduced Fe protein and release of oxidized protein from the MoFe protein both are abolished in a frozen solid. Relaxation of En was monitored by periodic EPR analysis at cryogenic temperature. The protocol rests on the hypothesis that an intermediate trapped in the frozen solid can relax toward the resting state only by the release of a stable reduction product from FeMo-co. In turnover under Ar, the only product that can be released is H2, which carries two reducing equivalents. This hypothesis implicitly predicts that states that have accumulated an odd number of electrons/protons (n = 1, 3) during turnover under Ar cannot relax to E0: E3 can relax to E1, but E1 cannot relax to E0 in the frozen state. The present experiments confirm this prediction and, thus, the quench-cryoannealing protocol and our assignment of E4, the foundation of the proposed mechanism for nitrogenase catalysis. This study further gives insights into the identity of the En intermediates with high-spin EPR signals, 1b and 1c, trapped under high electron flux.

Unification of reaction pathway and kinetic scheme for N2 reduction catalyzed by nitrogenase

Nitrogenase catalyzes the reduction of N(2) and protons to yield two NH(3) and one H(2). Substrate binding occurs at a complex organo-metallocluster called FeMo-cofactor (FeMo-co). Each catalytic cycle involves the sequential delivery of eight electrons/protons to this cluster, and this process has been framed within a kinetic scheme developed by Lowe and Thorneley. Rapid freezing of a modified nitrogenase under turnover conditions using diazene, methyldiazene (HN = N-CH(3)), or hydrazine as substrate recently was shown to trap a common S = ½ intermediate, designated I. It was further concluded that the two N-atoms of N(2) are hydrogenated alternately ("Alternating" (A) pathway). In the present work, Q-band CW EPR and (95)Mo ESEEM spectroscopy reveal such samples also contain a common intermediate with FeMo-co in an integer-spin state having a ground-state "non-Kramers" doublet. This species, designated H, has been characterized by ESEEM spectroscopy using a combination of (14,15)N isotopologs plus (1,2)H isotopologs of methyldiazene. It is concluded that: H has NH(2) bound to FeMo-co and corresponds to the penultimate intermediate of N(2) hydrogenation, the state formed after the accumulation of seven electrons/protons and the release of the first NH(3); I corresponds to the final intermediate in N(2) reduction, the state formed after accumulation of eight electrons/protons, with NH(3) still bound to FeMo-co prior to release and regeneration of resting-state FeMo-co. A proposed unification of the Lowe-Thorneley kinetic model with the "prompt" alternating reaction pathway represents a draft mechanism for N(2) reduction by nitrogenase.

Trapping an intermediate of dinitrogen (N2) reduction on nitrogenase

Nitrogenase reduces dinitrogen (N2) by six electrons and six protons at an active-site metallocluster called FeMo cofactor, to yield two ammonia molecules. Insights into the mechanism of substrate reduction by nitrogenase have come from recent successes in trapping and characterizing intermediates generated during the reduction of protons as well as nitrogenous and alkyne substrates by MoFe proteins with amino acid substitutions. Here, we describe an intermediate generated at a high concentration during reduction of the natural nitrogenase substrate, N2, by wild-type MoFe protein, providing evidence that it contains N2 bound to the active-site FeMo cofactor. When MoFe protein was frozen at 77 K during steady-state turnover with N2, the S = 3/2 EPR signal (g = [4.3, 3.64, 2.00]) arising from the resting state of FeMo cofactor was observed to convert to a rhombic, S = 1/2, signal (g = [2.08, 1.99, 1.97]). The intensity of the N2-dependent EPR signal increased with increasing N2 partial pressure, reaching a maximum intensity of approximately 20% of that of the original FeMo cofactor signal at > or = 0.2 atm N2. An almost complete loss of resting FeMo cofactor signal in this sample implies that the remainder of the enzyme has been reduced to an EPR-silent intermediate state. The N2-dependent EPR signal intensity also varied with the ratio of Fe protein to MoFe protein (electron flux through nitrogenase), with the maximum signal intensity observed with a ratio of 2:1 (1:1 Fe protein:FeMo cofactor) or higher. The pH optimum for the signal was 7.1. The N2-dependent EPR signal intensity exhibited a linear dependence on the square root of the EPR microwave power in contrast to the nonlinear response of signal intensity observed for hydrazine-, diazene-, and methyldiazene-trapped states. 15N ENDOR spectroscopic analysis of MoFe protein captured during turnover with 15N2 revealed a 15N nuclear spin coupled to the FeMo cofactor with a hyperfine tensor A = [0.9, 1.4, 0.45] MHz establishing that an N2-derived species was trapped on the FeMo cofactor. The observation of a single type of 15N-coupled nucleus from the field dependence, along with the absence of an associated exchangeable 1H ENDOR signal, is consistent with an N2 molecule bound end-on to the FeMo cofactor.

Reduction of N2 by Fe2+ via homogeneous and heterogeneous reactions Part 2: the role of metal binding in activating N2 for reduction; a requirement for both pre-biotic and biological mechanisms

Nitrogen reduction by ferrous iron has been suggested as an important mechanism in the formation of ammonia on pre-biotic Earth. This paper examines the effects of adsorption of ferrous iron onto a goethite (alpha-FeOOH) substrate on the thermodynamic driving force and rate of a ferrous iron-mediated reduction of N2 as compared with the homogeneous aqueous reaction. Utilizing density functional theory and Marcus Theory of proton coupled electron transfer reactions, the following two reactions were studied: Fe2+aq + N2aq + H2Oaq --> N2H* + FeOH2+aq and triple bond Fe2+ads + N2aq + 2H2Oaq --> N2H* + alpha-FeOOHs + 2H+aq. Although the rates of both reactions were calculated to be approximately zero at 298 K, the model results suggest that adsorption alters the thermodynamic driving force for the reaction but has no other effect on the direct electron transfer kinetics. Given that simply altering the thermodynamic driving force will not reduce dinitrogen, we can make mechanistic connections between possible prebiotic pathways and biological N2 reduction. The key to reduction in both cases is N2 adsorption to multiple transition metal centers with competitive H2 production.

Conformations generated during turnover of the Azotobacter vinelandii nitrogenase MoFe protein and their relationship to physiological function

Various S=3/2 EPR signals elicited from wild-type and variant Azotobacter vinelandii nitrogenase MoFe proteins appear to reflect different conformations assumed by the FeMo-cofactor with different protonation states. To determine whether these presumed changes in protonation and conformation reflect catalytic capacity, the responses (particularly to changes in electron flux) of the alphaH195Q, alphaH195N, and alphaQ191K variant MoFe proteins (where His at position 195 in the alpha subunit is replaced by Gln/Asn or Gln at position alpha-191 by Lys), which have strikingly different substrate-reduction properties, were studied by stopped-flow or rapid-freeze techniques. Rapid-freeze EPR at low electron flux (at 3-fold molar excess of wild-type Fe protein) elicited two transient FeMo-cofactor-based EPR signals within 1 s of initiating turnover under N(2) with the alphaH195Q and alphaH195N variants, but not with the alphaQ191K variant. No EPR signals attributable to P cluster oxidation were observed for any of the variants under these conditions. Furthermore, during turnover at low electron flux with the wild-type, alphaH195Q or alphaH195N MoFe protein, the longer-time 430-nm absorbance increase, which likely reflects P cluster oxidation, was also not observed (by stopped-flow spectrophotometry); it did, however, occur for all three MoFe proteins under higher electron flux. No 430-nm absorbance increase occurred with the alphaQ191K variant, not even at higher electron flux. This putative lack of involvement of the P cluster in electron transfer at low electron flux was confirmed by rapid-freeze (57)Fe Mössbauer spectroscopy, which clearly showed FeMo-factor reduction without P cluster oxidation. Because the wild-type, alphaH195Q and alphaH195N MoFe proteins can bind N(2), but alphaQ195K cannot, these results suggest that P cluster oxidation occurs only under high electron flux as required for N(2) reduction.

Ammonia Production at the FeMo Cofactor of Nitrogenase: Results from Density Functional Theory

Biological nitrogen fixation has been investigated beginning with the monoprotonated dinitrogen bound to the FeMo cofactor of nitrogenase up to the formation of the two ammonia molecules. The energy differences of the relevant intermediates, the reaction barriers, and potentially relevant side branches are presented. During the catalytic conversion, nitrogen bridges two Fe atoms of the central cage, replacing a sulfur bridge present before dinitrogen binds to the cofactor. A transformation from cis- to trans-diazene has been found. The strongly exothermic cleavage of the dinitrogen bond takes place, while the Fe atoms are bridged by a single nitrogen atom. The dissociation of the second ammonia from the cofactor is facilitated by the closing of the sulfur bridge following an intramolecular proton transfer. This closes the catalytic cycle.

Connecting nitrogenase intermediates with the kinetic scheme for N2 reduction by a relaxation protocol and identification of the N2 binding state

A major obstacle to understanding the reduction of N2 to NH3 by nitrogenase has been the impossibility of synchronizing electron delivery to the MoFe protein for generation of specific enzymatic intermediates. When an intermediate is trapped without synchronous electron delivery, the number of electrons, n, it has accumulated is unknown. Consequently, the intermediate is untethered from kinetic schemes for reduction, which are indexed by n. We show that a trapped intermediate itself provides a "synchronously prepared" initial state, and its relaxation to the resting state at 253 K, conditions that prevent electron delivery to MoFe protein, can be analyzed to reveal n and the nature of the relaxation reactions. The approach is applied to the "H+/H- intermediate" (A) that appears during turnover both in the presence and absence of N2 substrate. A exhibits an S = 1/2 EPR signal from the active-site iron-molybdenum cofactor (FeMo-co) to which are bound at least two hydrides/protons. A undergoes two-step relaxation to the resting state (C): A --> B --> C, where B has an S = 3/2 FeMo-co. Both steps show large solvent kinetic isotope effects: KIE approximately 3-4 (85% D2O). In the context of the Lowe-Thorneley kinetic scheme for N2 reduction, these results provide powerful evidence that H2 is formed in both relaxation steps, that A is the catalytically central state that is activated for N2 binding by the accumulation of n = 4 electrons, and that B has accumulated n = 2 electrons.

Evidence for a dynamic role for homocitrate during nitrogen fixation: the effect of substitution at the alpha-Lys426 position in MoFe-protein of Azotobacter vinelandii

Although it is generally accepted that the active site of nitrogenase is located on the FeMo-cofactor, the exact site(s) of N2 binding and reduction remain the subject of continuing debate, with both molybdenum and iron atoms being suggested as key players. The current consensus favours binding of acetylene and some other non-biologically relevant substrates to the central iron atoms of the FeMo-cofactor [Dos Santos, Igarashi, Lee, Hoffman, Seefeldt and Dean (2005) Acc. Chem. Res. 38, 208-214]. The reduction of N2 is, however, a more demanding process than reduction of these alternative substrates because it has a much higher activation energy and does not bind until three electrons have been accumulated on the enzyme. The possible conversion of bidentate into monodentate homocitrate on this three electron-reduced species has been proposed to free up a binding site for N2 on the molybdenum atom. One of the features of this hypothesis is that alpha-Lys426 facilitates chelate ring opening and subsequent orientation of the monodentate homocitrate by forming a specific hydrogen bond to the homocitrate -CH2CH2CO2- carboxylate group. In support of this concept, we show that mutation of alpha-Lys426 can selectively perturb N2 reduction without affecting acetylene reduction. We interpret our experimental observations in the light of a detailed molecular mechanics modelling study of the wild-type and altered MoFe-nitrogenases.

Nitrogenase proteins from Gluconacetobacter diazotrophicus, a sugarcane-colonizing bacterium

Gluconacetobacter diazotrophicus Pal-5 grew well and expressed nitrogenase activity in the absence of NH4+ and at initial O2 concentrations greater than 5% in the culture atmosphere. G. diazotrophicus nitrogenase consisted of two components, Gd1 and Gd2, which were difficult to separate but were purified individually to homogeneity. Their compositions were very similar to those of Azotobacter vinelandii nitrogenase, however, all subunits were slightly smaller in size. The purified Gd1 protein contained a 12:1 Fe/Mo ratio as compared to 14:1 found for Av1 purified in parallel. Both Gd2 and Av2 contained 3.9 Fe atoms per molecule. Dithionite-reduced Gd1 exhibited EPR features at g=3.69, 3.96, and 4.16 compared with 3.64 and 4.27 for Av1. Gd2 gave an S=1/2 EPR signal identical to that of Av2. A Gd1 maximum specific activity of 1600 nmol H2 (min mg of protein)(-1) was obtained when complemented with either Gd2 or Av2, however, more Av2 was required. Gd2 had specific activities of 600 and 1100 nmol H2 (min mg protein)(-1) when complemented with Av1 and Gd1, respectively. The purified G. diazotrophicus nitrogenase exhibited a narrowed pH range for effective catalysis compared to the A. vinelandii nitrogenase, however, both exhibited maximum specific activity at about pH 7. The Gd-nitrogenase was more sensitive to ionic strength than the Av-nitrogenase.

Model for Acetylene Reduction by Nitrogenase Derived from Density Functional Theory

The catalytic cycle of acetylene reduction at the FeMo cofactor of nitrogenase has been investigated on the basis of density functional theory. C2H2 binds to the same site as N2, but it binds to a less reduced state of the cofactor. In a manner similar to that of N2 binding, one of the sulfur bridges opens during acetylene binding. The model explains the strong noncompetitive inhibition of N2 reduction by C2H2 and the weak competitive inhibition of C2H2 reduction by N2. Our proposed mechanism is consistent with experimentally observed stereoselectivity and the ability of C2H2 to suppress H2 production by nitrogenase.

Variant MoFe proteins of Azotobacter vinelandii: effects of carbon monoxide on electron paramagnetic resonance spectra generated during enzyme turnover

The resting state of wild-type nitrogenase MoFe protein exhibits an S=3/2 electron paramagnetic resonance (EPR) signal originating from the FeMo cofactor, the enzyme's active site. When nitrogenase turns over under CO, this signal disappears and one (sometimes two) of three new EPR signals, which also arise from the FeMo cofactor, appears, depending on the CO concentration. The appearance and properties of these CO-inducible EPR signals, which were also generated with variant MoFe proteins (alphaR96Q, alphaR96K, alphaQ191K, alphaR359K, alphaR96K/alphaR359K, alphaR277C, alphaR277H, and DeltanifV) that are impacted around the FeMo cofactor, have been investigated. No new CO-induced EPR signals arise from any variant, suggesting that no new CO-binding sites are produced by the substitutions. All variant proteins, except alphaR277H, produce the lo-CO signal; all, except alphaQ191K, produce the hi(5)-CO signal; but only two (alphaR96Q and DeltanifV) exhibit the hi-CO signal. FeMo cofactor's environment clearly dictates which CO-induced EPR signals are generated; however, none of these EPR signals correlate with CO inhibition of H(2) evolution observed with some of these variants. CO inhibition of H(2) evolution is, therefore, due to CO binding to a different site(s) from those responsible for the CO-induced EPR signals. Some resting-state variants have overlapping S=3/2 EPR signals, whose intensities simultaneously decrease under turnover conditions, indicating that all FeMo cofactor conformations are catalytically active. Moreover, these variants produce a similar number of hi(5)-CO signals after turnover under CO to the number of resting-state S=3/2 signals. The FeMo cofactor associated with the hi(5)-CO signal likely contains two bridging CO molecules.

Chemical activity of the nitrogenase FeMo cofactor with a central nitrogen ligand: density functional study

We investigate the chemical consequences of a central ligand in the nitrogenase FeMo cofactor using density functional calculations. Several studies have shown that the central ligand most probably is a nitrogen atom, but the consequences for the chemical reactivity of the cofactor are unknown. We investigate several possible routes for insertion of the central nitrogen ligand and conclude that all routes involve barriers and intermediate states, which are inaccessible at ambient conditions. On this basis we suggest that the central nitrogen ligand is present at all times during the reaction. Furthermore, we investigate how the FeMoco with the central ligand can interact with N(2) and reduce it.

Nitrogen Binding to the FeMo-Cofactor of Nitrogenase

Density functional calculations are presented to unravel the first steps of nitrogen fixation of nitrogenase. The individual steps leading from the resting state to nitrogen binding at the FeMo-cofactor with a central nitrogen ligand are characterized. The calculations indicate that the Fe-Mo cage opens as dinitrogen binds to the cluster. In the resting state, the central cage is overall neutral. Electrons and protons are transferred in an alternating manner. Upon dinitrogen binding, one protonated sulfur bridge is broken. An axial and a bridged binding mode of dinitrogen have been identified. Adsorption at the Mo site has been investigated but appears to be less favorable than binding at Fe sites.

Novel EPR signals associated with FeMoco centres of MoFe protein in MgADP-inhibited turnover of nitrogenase

Two novel electron paramagnetic resonance (EPR) signals arising from the [1Mo-7Fe-9S-homocitrate] (FeMoco) centres of MoFe protein of Klebsiella pneumoniae nitrogenase (Kp1) were observed following turnover under MgATP-limited conditions. The combination of the nitrogenase Fe protein of Clostridium pasteurianum showed similar signals. The accumulation of MgADP under these conditions causes the normal EPR signal of dithionite-reduced Kp1 (with g=4.3, 3.6, 2.01) to be slowly converted to novel signals with g=4.74, 3.32, 2.00 and g=4.58, 3.50, 1.99. These signals do not form in incubation of protein mixtures containing only MgADP, thus they may be associated with trapped intermediates of the catalytic cycle.