Structural and binding characteristics of the carboxyl terminal fragment of apolipophorin III from Manduca sexta

Fragments of Locusta migratoria apoLp-III provide insight into lipid binding

Apolipophorin III (apoLp-III) from Locusta migratoria is an exchangeable apolipoprotein with a critical role in lipid transport in insects. The protein is composed of a bundle of five amphipathic α-helices which undergo a large conformational change upon lipid binding. To better understand the apoLp-III lipid binding interaction, the protein was cleaved by cyanogen bromide upon introduction of a S92M mutation, generating an N-terminal fragment corresponding to the first three helices (NT_H1–3) and a C-terminal fragment of the last two helices (CT_H4–5). MALDI-TOF analysis of the HPLC purified fragments provided masses of 9863.8 Da for NT_H1–3 and 7497.0 Da for CT_H4–5 demonstrating that the intended fragments were obtained. Circular dichroism spectra revealed a decrease in helical content from 82% for the intact protein to 57% for NT_H1–3 and 41% for CT_H4–5. The fragments adopted considerably higher α-helical structure in the presence of trifluoroethanol or phospholipids. Equimolar mixing of the two fragments did not result in changes in helical content or tryptophan fluorescence, indicating recombination into the native protein fold did not occur. The rate of protein induced dimyristoylphosphatidylcholine vesicle solubilization increased 15-fold for NT_H1–3 and 100-fold for CT_H4–5 compared to the intact protein. Despite the high activity in phospholipid vesicle interaction, CT_H4–5 did not protect phospholipase-treated low-density lipoprotein from aggregation. In contrast, NT_H1–3 provided protection to lipoprotein aggregation similar to the intact protein, indicating that specific amino acid residues in this part of apoLp-III are essential for lipoprotein binding interaction.

Expression of the C-terminal domain of human apolipoprotein A-I using a chimeric apolipoprotein

Human apolipoprotein A-I (apoA-I) is the most abundant protein in high-density lipoprotein, an anti-atherogenic lipid-protein complex responsible for reverse cholesterol transport. The protein is composed of an N-terminal helix bundle domain, and a small C-terminal (CT) domain. To facilitate study of CT-apoA-I, a novel strategy was employed to produce this small domain in a bacterial expression system. A protein construct was designed of insect apolipophorin III (apoLp-III) and residues 179-243 of apoA-I, with a unique methionine residue positioned between the two proteins and an N-terminal His-tag to facilitate purification. The chimera was expressed in E. coli, purified by Ni-affinity chromatography, and cleaved by cyanogen bromide. SDS-PAGE revealed the presence of three proteins with masses of 7 kDa (CT-apoA-I), 18 kDa (apoLp-III), and a minor 26 kDa band of uncleaved chimera. The digest was reloaded on the Ni-affinity column to bind apoLp-III and uncleaved chimera, while CT-apoA-I was washed from the column and collected. Alternatively, CT-apoA-I was isolated from the digest by reversed-phase HPLC. CT-apoA-I was α-helical, highly effective in solubilizing phospholipid vesicles and disaggregating LPS micelles. However, CT-apoA-I was less active compared to full-length apoA-I in protecting lipolyzed low density lipoproteins from aggregating, and disrupting phosphatidylglycerol bilayer vesicles. Thus the novel expression system produced mg quantities of functional CT-apoA-I, facilitating structural and functional studies of this critical domain of apoA-I.

Deletion of the N- or C-Terminal Helix of Apolipophorin III To Create a Four-Helix Bundle Protein

Apolipophorin III (apoLp-III) is an exchangeable apolipoprotein found in insects and plays an important function in lipid transport. The protein has an unusual five-helix bundle architecture, deviating from the common four-helix bundle motif. To understand the role of the additional helix in apoLp-III, the N-terminal or C-terminal helix was deleted to create a putative four-helix bundle protein. While the protein lacking helix-1 could be expressed in bacteria albeit at reduced yields, apoLp-III lacking helix-5 could not be produced. Mutational analysis by truncating helix-5 showed that a minimum segment of approximately one-third of the C-terminal helix is required for protein expression. The variant lacking helix-5 was produced by inserting a methionine residue between helix-4 and -5; subsequent cyanogenbromide cleavage generated the four-helix variant. Both N- and C-terminal helix deletion variants displayed significantly reduced helical content, protein stability, and tertiary structure. Despite the significantly altered structure, the variants were still fully functional. The rate of dimyristoylphosphatidylcholine vesicle solubilization was enhanced 4-5-fold compared to the wild-type protein, and the deletion variants were effective in binding to lipolyzed low density lipoprotein thereby preventing lipoprotein aggregation. These results show that the additional helix of apoLp-III is not essential for lipid binding but is required for proper folding to keep the protein into a stable conformation.

The "beta-clasp" model of apolipoprotein A-I--a lipid-free solution structure determined by electron paramagnetic resonance spectroscopy

Apolipoprotein A-I (apoA-I) is the major protein component of high density lipoproteins (HDL) and plays a central role in cholesterol metabolism. The lipid-free/lipid-poor form of apoA-I is the preferred substrate for the ATP-binding cassette transporter A1 (ABCA1). The interaction of apoA-I with ABCA1 leads to the formation of cholesterol laden high density lipoprotein (HDL) particles, a key step in reverse cholesterol transport and the maintenance of cholesterol homeostasis. Knowledge of the structure of lipid-free apoA-I is essential to understanding its critical interaction with ABCA1 and the molecular mechanisms underlying HDL biogenesis. We therefore examined the structure of lipid-free apoA-I by electron paramagnetic resonance spectroscopy (EPR). Through site directed spin label EPR, we mapped the secondary structure of apoA-I and identified sites of spin coupling as residues 26, 44, 64, 167, 217 and 226. We capitalize on the fact that lipid-free apoA-I self-associates in an anti-parallel manner in solution. We employed these sites of spin coupling to define the central plane in the dimeric apoA-I complex. Applying both the constraints of dipolar coupling with the EPR-derived pattern of solvent accessibility, we assembled the secondary structure into a tertiary context, providing a solution structure for lipid-free apoA-I. This article is part of a Special Issue entitled Advances in High Density Lipoprotein Formation and Metabolism: A Tribute to John F. Oram (1945-2010).

Tyrosine fluorescence analysis of apolipophorin III–lipopolysaccharide interaction

Apolipophorin III (apoLp-III) is an exchangeable apolipoprotein that binds to lipopolysaccharides (LPS). Polyacrylamide gel electrophoresis analysis demonstrated that apoLp-III from Galleria mellonella associated with various truncated LPS variants, including lipid A. Subsequent binding studies were performed employing the intrinsic tyrosine fluorescence properties of apoLp-III, which is highly quenched in the unbound state. A marked increase in tyrosine fluorescence intensity was observed upon binding to LPS or detoxified LPS, indicating a new microenvironment for Tyr-142. This also implies that the LPS carbohydrate region is involved in LPS binding. Dissociation constants (Kd) measured by apoLp-III titration were estimated at approximately 1 microM. Increasing the ionic strength did not decrease the Kd, neither did LPS phosphate removal. In addition, truncation apoLp-III mutants, lacking two complete helices, were still able to associate with LPS. This indicates that the association of apoLp-III with LPS may not be governed by charge but by hydrophobic interactions.

Optical Spectroscopy To Investigate the Structure of Regenerated Bombyx mori Silk Fibroin in Solution

Fluorescence and circular dichroism spectroscopy were used to monitor the conformational transition of regenerated Bombyx mori silk fibroin (RSF) in aqueous solutions under different conditions. According to the analysis of fluorescence spectra using anilinonaphthalene-8-sulfonic acid magnesium salt (ANS) as an external probe, the destruction of the hydrophobic core prior to the secondary structure change suggests that this collapse may initiate the conformational transition from random coil to beta-sheet for RSF. The temperature dependence of the structural changes of RSF, detected by both fluorescence spectroscopy and circular dichroism, shows a reversible process upon heating and recooling, with the midpoint around 45 degrees C. The results also indicate that most of the tryptophan (Trp) residues contained in silk fibroin are concentrated on the surface of the unfolded protein. However, they will change their location in the highly ordered structure (e.g., becoming more homogeneous) with the conformational transition of silk fibroin. Moreover, our studies also suggest that the presence of water plays a crucial role during the structure changes of fibroin.

Interhelical contacts are required for the helix bundle fold of apolipophorin III and its ability to interact with lipoproteins

Apolipophorin-III (apoLp-III) from the insect, Manduca sexta, is a 166-residue exchangeable apolipoprotein that plays a critical role in the dynamics of plasma lipoprotein interconversions. Our previous work indicated that a 36-residue C-terminal peptide fragment, generated by cyanogen bromide digestion of apoLp-III, was unable to bind to lipid surfaces (Narayanaswami V, Kay CM, Oikawa K, Ryan RO, 1994, Biochemistry 33:13312-13320), and showed no secondary structure in aqueous solution. In this paper, we have performed structural studies of this peptide (E131-Q166) complexed with SDS detergent micelles, or in the presence of the helix-inducing solvent trifluoroethanol (TFE), by two-dimensional 1H NMR spectroscopy. The peptide adopts an alpha-helical structure in the presence of both SDS and 50% TFE. The lipid-bound structure of the peptide, generated from the NMR NOE data, showed an elongated, slightly curved alpha-helix. Despite its high alpha-helix forming propensity, the peptide requires alpha helix-promoting environment to adopt an alpha-helical structure. This indicates the importance of the surrounding chemical environment and implies that, in the absence of lipid, tertiary contacts in the folded protein play a role in maintaining its structural integrity. Furthermore, the data suggest that the amphipathic helix bundle organization serves as a prerequisite structural motif for the reversible lipoprotein-binding activity of M. sexta apoLp-III.

Fluorescence studies of exchangeable apolipoprotein-lipid interactions. Superficial association of apolipophorin III with lipoprotein surfaces

Apolipophorin III (apoLp-III) from the Sphinx moth, Manduca sexta, is an 18-kDa exchangeable apolipoprotein that reversibly associates with lipoprotein particles. In the absence of lipid, apoLp-III exists as an elongated bundle of five amphipathic alpha-helices. Upon lipid association, the protein is postulated to undergo a major conformational change, wherein the bundle opens around hinge loop regions, resulting in exposure of its hydrophobic interior. Fluorescence quenching techniques have been employed to study apoLp-III helix topography and spatial arrangement in phospholipid disc complexes and intact lipoprotein particles. Intrinsic fluorescence of the single tyrosine in apoLp-III was exploited to monitor the location of helix 5 in model disc complexes. To investigate other regions of the protein, site-directed mutagenesis was performed to introduce cysteine residues, replacing Asn-40 (helix 2, N40C) or Leu-90 (helix 3, L90C), thereby providing two mutant apoLp-IIIs, each with a single site for covalent attachment of the extrinsic fluorescent probe, N-(1-pyrene) maleimide. In the lipid-free state, pyrene-N40C- and pyrene-L90C-apoLp-III were highly accessible to the negatively charged aqueous quencher KI, yielding Ksv values of 27.1 and 19.8 M-1, respectively. Upon binding to the surface of a spherical lipoprotein particle, Ksv values for KI decreased by about 90% for both pyrene-labeled apoLp-IIIs, indicating a significant change in the local microenvironment of the fluorophores. A lesser decrease in Ksv was observed when the pyrene-labeled apoLp-IIIs were bound to phospholipid disc complexes. When spin-labeled fatty acids 5-doxylstearic acid and 12-doxylstearic acid were used as lipophilic quenchers, tyrosine and pyrene fluorescence were more effectively quenched by 5-doxylstearic acid in both phospholipid bilayer disc complexes and spherical lipoprotein particles. These data provide insight into the spatial topography of apoLp-III alpha-helices in phospholipid disc complexes and support the concept that interaction with spherical lipoprotein particles results in superficial contact of apoL-III helical segments with the monolayer surface, providing a basis for its reversible binding ability.

Hydrogen/deuterium exchange kinetics of apolipophorin-III in lipid-free and phospholipid-bound states. An analysis by Fourier transform infrared spectroscopy

Attenuated total reflection Fourier transform infrared spectroscopy was used to probe the kinetics of hydrogen/deuterium exchange in Manduca sexta apolipophorin-III (apoLp-III). ApoLp-III is an exchangeable apolipoprotein that is made up of five elongated amphipathic alpha-helices in a helical bundle conformation in the monomeric lipid-free form. Upon interaction with phospholipids, it is postulated to undergo a large conformational change whereby the hydrophobic interior is exposed, facilitating binding to the lipid surfaces. We have used the lipid-free and dimyristoylphosphatidylcholine-bound apoLp-III to study the dynamically variable domains in the two forms. Three populations of amide protons varying in their hydrogen/deuterium exchange rates were found to exist: slow, intermediate, and fast exchanging, which could correspond to completely buried, partially buried, and solvent-exposed domains on the protein in both the states. In lipid-free apoLp-III, 36, 12, and 52% of the total residues contributed to the slow, intermediate, and fast exchanging populations, respectively. In the dimyristoylphosphatidylcholine-bound form, the corresponding distribution was 20, 16, and 64%, representing a 12% increase in the number of exposed residues. The results are discussed in terms of increased solvent accessibility due to gross tertiary structural reorganization.

Only the two end helixes of eight tandem amphipathic helical domains of human apo A-I have significant lipid affinity. Implications for HDL assembly

Human apolipoprotein A-I (apo A-I) possesses multiple tandem repeating 22-mer amphipathic alpha-helixes. Computer analysis and studies of model synthetic peptides and recombinant protein-lipid complexes of phospholipids have suggested that apo A-I interacts with HDL surface lipids through cooperation among its individual amphipathic helical domains. To delineate the overall lipid-associating properties of apo A-I, the first step is to understand the lipid-associating properties of individual amphipathic helical domains. To this end, we synthesized and studied each of the eight tandem repeating 22-mer domains of apo A-I: residues 44-65, 66-87, 99-120, 121-142, 143-164, 165-186, 187-208, and 220-241. Among the 22-mers, only the N- and C-terminal peptides (44-65 and 220-241) were effective in clarifying multilamellar vesicles (MLVs) of dimyristoylphosphatidylcholine (DMPC). These two peptides also exhibited the highest partition coefficient into 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine liposomes, the highest exclusion pressure for penetration into an egg yolk phosphatidylcholine monolayer, and the greatest reduction in the enthalpy of the gel-to-liquid crystalline phase transition of DMPC MLVs. These results suggest that the strong, lipid-associating properties of apo A-I are localized to the N- and C-terminal amphipathic domains. Although each of the eight peptides studied has an amphipathic structure, models based on changes in residual effective amino acid hydrophobicity resulting from differing depths of helix penetration into the lipid are best able to explain the high lipid affinity possessed by the two terminal domains. Differential scanning calorimetry (DSC) studies showed that on a molar basis, apo A-I is about 10 times more effective than the most effective peptide analyzed in reducing the enthalpy of the gel-to-liquid crystalline phase transition of DMPC MLVs. Because previous proteolysis experiments coupled with the present DSC results suggest that the lipid-associating domains of apo A-I are distributed throughout the length of the 243 amino acid residues, we propose that the terminal amphipathic helical domains are involved in the initial binding of apo A-I to the lipid surface to form HDL particles, followed by cooperative binding of the middle six amphipathic helical domains, perhaps aided by salt-bridge formation between adjacent helixes arranged in an antiparallel orientation.

Merck Frosst award lecture 1995. La conference Merck Frosst 1995. Structural studies of lipoproteins and their apolipoprotein components

Lipid transport processes via the circulatory system of animals are a vital function that utilizes highly specialized lipoprotein complexes. These complexes of protein and lipid impart solubility to otherwise insoluble lipids. The apoprotein components of lipoprotein complexes serve to stabilize the lipid components and modulate particle metabolism and function as ligands for receptor-mediated endocytosis of lipoproteins. We have used an insect (Manduca sexta) model system for studies of lipid transport. In this system, flight activity elicits a dramatic increase in the demand for glycerolipid fuel molecules by flight muscle tissue. These lipids are mobilized from a storage organ and transported through the hemolymph (blood) to the flight muscle by the lipoprotein, lipophorin. This system possesses the unique property that lipids are loaded onto pre-existing high density lipophorin through the action of a lipid transfer particle (LTP). LTP is a high molecular weight hemolymph component that facilitates net vectorial lipid transfer from fat body tissue to lipophorin. The increase in lipid content of the lipoprotein induces association of a low molecular weight amphipathic exchangeable apolipoprotein, apolipophorin III (apoLp-III). ApoLp-III is a 18 kDa protein that normally exists as a water-soluble monomeric hemolymph protein. The structural properties of apoLp-III have been investigated by X-ray crystallography. ApoLp-III from Locusta migratoria adopts a five helix bundle conformation wherein each of the amphipathic helices orients with its hydrophobic face directed toward the interior of the bundle. It has been hypothesized that lipid association requires a dramatic conformational change wherein the helix bundle opens about putative hinge domains located in the loops between helices. The data accumulated support the concept that apoLp-III is a member of the broad class of exchangeable apolipoproteins and structural information learned from this system is directly applicable to analogous proteins in higher organisms.