NMR solution structure, stability, and interaction of the recombinant bovine fibrinogen alphaC-domain fragment

Functional properties of individual sub-domains of the fibrin(ogen) αC-domains

Background

Fibrinogen is a large polyfunctional plasma protein consisting of a number of structural and functional domains. Among them, two αC-domains, each formed by the amino acid residues Аα392-610, are involved in fibrin polymerization, activation of fibrinolysis, platelet aggregation, and interaction with different cell types. Previous study revealed that each fibrinogen αC-domain consists of the N-terminal and C-terminal sub-domains. The major objections of the present study were to test functional role of these sub-domains in the above mentioned processes.

Methods

To achieve these objections, we used specific proteases to prepare two truncated forms of fibrinogen, fibrinogen desAα505-610 and fibrinogen desAα414-610, missing their N-terminal and both N- and C-terminal sub-domains, respectively.

Results

Our study with these truncated forms using turbidity measurements and electron microscopy revealed that the N- and C-terminal subdomains both contribute to protofibril formation and their lateral aggregation into fibers during fibrin polymerization process. These two sub-domains also contributed to platelet aggregation with the N-terminal sub-domains playing a more significant role in this process. At the same time, the C-terminal sub-domains make the major contribution to the plasminogen activation process. Further, our experiments revealed that the C-terminal sub-domains are involved in endothelial cell viability and migration of cancer cells.

Conclusions

Thus, the results obtained establish the functional role of individual sub-domains of the αC-domains in fibrin polymerization, activation of fibrinolytic system, platelet aggregation, and cellular interactions.

General significance

The present study expands our understanding of the functional role of individual fibrinogen domains and their specific portions in various fibrin(ogen)-dependent processes.

The Story of the Fibrin(ogen) αC-Domains: Evolution of Our View on Their Structure and Interactions

Although much has been established concerning the overall structure and function of fibrinogen, much less has been known about its two αC regions, each consisting of an αC-connector and an αC-domain, but new information has been accumulating. This review summarizes the state of our current knowledge of the structure and interactions of fibrinogen's αC regions. A series of studies with isolated αC regions and their fragments demonstrated that the αC-domain forms compact ordered structures consisting of N- and C-terminal subdomains including β sheets and suggested that the αC-connector has a poly(L-proline) type II structure. Functionally, the αC-domains interact intramolecularly with each other and with the central region of the molecule, first demonstrated by electron microscopy and then quantified by optical trap force spectroscopy. Upon conversion of fibrinogen into fibrin, the αC-domains switch from intra- to intermolecular interactions to form ordered αC polymers. The formation of αC polymers occurs mainly through the homophilic interaction between the N-terminal subdomains; interaction between the C-terminal subdomains and the αC-connectors also contributes to this process. Considerable evidence supports the idea that the αC-regions accelerate fibrin polymerization and affect the final structure of fibrin clots. The interactions between αC-regions are important for the mechanical properties of clots, increasing their stiffness and extensibility. Conversion of fibrinogen into fibrin results in exposure of multiple binding sites in its αC regions, providing interaction of fibrin with different proteins and cell types during hemostasis and wound healing. This heretofore mysterious part of the fibrinogen molecule is finally giving up its secrets.

Why fibrin biomechanical properties matter for hemostasis and thrombosis

Polymeric fibrin displays unique structural and biomechanical properties that contribute to its essential role of generating blood clots that stem bleeds. The aim of this review is to discuss how the fibrin clot is formed, how protofibrils make up individual fibrin fibers, what the relationship is between the molecular structure and fibrin biomechanical properties, and how fibrin biomechanical properties relate to the risk of thromboembolic disease. Fibrin polymerization is driven by different types of bonds, including knob-hole interactions displaying catch-slip characteristics, and covalent crosslinking of fibrin polypeptides by activated factor XIII. Key biophysical properties of fibrin polymer are its visco-elasticity, extensibility and resistance to rupture. The internal packing of protofibrils within fibers changes fibrin biomechanical behavior. There are several methods to analyze fibrin biomechanical properties at different scales, including AFM force spectroscopy, magnetic or optical tweezers and rheometry, amongst others. Clinically, fibrin biomechanical characteristics are key for the prevention of thromboembolic disorders such as pulmonary embolism. Future studies are needed to address unanswered questions regarding internal molecular structure of the fibrin polymer, the structural and molecular basis of its remarkable mechanical properties and the relationship of fibrin biomechanical characteristics with thromboembolism in patients with deep vein thrombosis and ischemic stroke.

Fibrin(ogen) as a Therapeutic Target: Opportunities and Challenges

Fibrinogen is one of the key molecular players in haemostasis. Thrombin-mediated release of fibrinopeptides from fibrinogen converts this soluble protein into a network of fibrin fibres that form a building block for blood clots. Thrombin-activated factor XIII further crosslinks the fibrin fibres and incorporates antifibrinolytic proteins into the network, thus stabilising the clot. The conversion of fibrinogen to fibrin also exposes binding sites for fibrinolytic proteins to limit clot formation and avoid unwanted extension of the fibrin fibres. Altered clot structure and/or incorporation of antifibrinolytic proteins into fibrin networks disturbs the delicate equilibrium between clot formation and lysis, resulting in either unstable clots (predisposing to bleeding events) or persistent clots that are resistant to lysis (increasing risk of thrombosis). In this review, we discuss the factors responsible for alterations in fibrin(ogen) that can modulate clot stability, in turn predisposing to abnormal haemostasis. We also explore the mechanistic pathways that may allow the use of fibrinogen as a potential therapeutic target to treat vascular thrombosis or bleeding disorders. Better understanding of fibrinogen function will help to devise future effective and safe therapies to modulate thrombosis and bleeding risk, while maintaining the fine balance between clot formation and lysis.

Structure and function of fibrinogen BβN-domains

Two BβN-domains of fibrinogen are formed by the N-terminal portions of its two Bβ chains including amino acid residues Bβ1-65. Although their folding status is not well understood and the recombinant disulfide-linked (Bβ1-66)2 fragment corresponding to a pair of these domains was found to be unfolded, some data suggest that these domains may be folded in the parent molecule. In contrast, their major functional properties are well established. Removal of fibrinopeptides B (amino acid residues Bβ1-14) from these domains upon fibrinogen to fibrin conversion results in the exposure of multiple binding sites in fibrin βN-domains (residues β15-65). These sites provide interactions of the βN-domains with different proteins and cells and their participation in various physiological and pathological processes including fibrin assembly, fibrin-dependent angiogenesis, and fibrin-dependent leukocyte transmigration and thereby inflammation. The major goal of the present review is to summarize current view on the structure and function of these domains in fibrinogen and fibrin and their role in the above-mentioned processes.

Fibrinogen αC-regions are not directly involved in fibrin polymerization as evidenced by a "Double-Detroit" recombinant fibrinogen mutant and knobs-mimic peptides

BACKGROUND

Fibrin polymerization, following fibrinopeptides A and B (FpA, FpB) cleavage, relies on newly exposed α- and β-chains N-termini (GPR, GHR; A-, B-knobs, respectively) engaging preexistent a and b pockets in other fibrin(ogen) molecules' γ- and (B)β-chains C-terminal regions. A role for mostly disordered (A)α-chains C-terminal regions "bridging" between fibrin molecules/fibrils has been proposed.

OBJECTIVES

Fibrinogen Detroit is a clinically observed mutation (AαR19 → S) with nonengaging GPS A-knobs. By analogy, a similar Bβ-chain mutation, BβR17 → S, should produce nonengaging GHS B-knobs. A homozygous "Double-Detroit" mutant (AαR19 → S, BβR17 → S; DD-FG) was developed: with A-a and B-b engagements endogenously blocked, other interactions would become apparent.

METHODS

DD-FG, wild-type recombinant (WT-FG), and human plasma (hp-FG) fibrinogen self-association was studied by turbidimetry coupled with fibrinopeptides release high-performance liquid chromatography (HPLC)/mass spectrometry analyses, and by light-scattering following size-exclusion chromatography (SE-HPLC).

RESULTS

In contrast to WT-FG and hp-FG, DD-FG produced no turbidity increase, irrespective of thrombin concentration. The SE-HPLC profile of concentrated DD-FG was unaffected by thrombin treatment, and light-scattering, at lower concentration, showed no intensity and hydrodynamic radius changes. Compared with hp-FG, both WT-FG and DD-FG showed no FpA cleavage difference, while ~50% FpB was not recovered. Correspondingly, SDS-PAGE/Western-blots revealed partial Bβ-chain N-terminal and Aα-chain C-terminal degradation. Nevertheless, ~70% DD-FG molecules bearing (A)αC-regions potentially able to associate were available. Higher-concentration, nearly intact hp-FG with 500-fold molar excess GPRP-NH2 /GHRP-NH2 knobs-mimics experiments confirmed these no-association findings.

CONCLUSIONS

(A)αC-regions interactions appear too weak to assist native fibrin polymerization, at least without knobs engagement. Their role in all stages should be carefully reconsidered.

Impact of posttranslational modifications on atomistic structure of fibrinogen

Oxidative stress in humans is related to various pathophysiological processes, which can manifest in numerous diseases including cancer, cardiovascular diseases, and Alzheimer’s disease. On the atomistic level, oxidative stress causes posttranslational modifications, thus inducing structural and functional changes into the proteins structure. This study focuses on fibrinogen, a blood plasma protein that is frequently targeted by reagents causing posttranslational modifications in proteins. Fibrinogen was in vitro modified by three reagents, namely sodium hypochlorite, malondialdehyde, and 3-morpholinosydnonimine that mimic the oxidative stress in diseases. Newly induced posttranslational modifications were detected via mass spectrometry. Electron microscopy was used to visualize changes in the fibrin networks, which highlight the extent of disturbances in fibrinogen behavior after exposure to reagents. We used molecular dynamics simulations to observe the impact of selected posttranslational modifications on the fibrinogen structure at the atomistic level. In total, 154 posttranslational modifications were identified, 84 of them were in fibrinogen treated with hypochlorite, 51 resulted from a reaction of fibrinogen with malondialdehyde, and 19 were caused by 3-morpholinosydnonimine. Our data reveal that the stronger reagents induce more posttranslational modifications in the fibrinogen structure than the weaker ones, and they extensively alter the architecture of the fibrin network. Molecular dynamics simulations revealed that the effect of posttranslational modifications on fibrinogen secondary structure varies from negligible alternations to serious disruptions. Among the serious disruptions is the oxidation of γR375 resulting in the release of Ca²⁺ ion that is necessary for appropriate fibrin fiber formation. Folding of amino acids γE72–γN77 into a short α-helix is a result of oxidation of γP76 to glutamic acid. The study describes behaviour of fibrinogen coiled-coil connecter in the vicinity of plasmin and hementin cleavage sites.

Missing regions within the molecular architecture of human fibrin clots structurally resolved by XL-MS and integrative structural modeling

Fibrinogen hexamers are major components of blood clots. After release of fibrinopeptides resulting in fibrin monomers, clot formation occurs through fibrin oligomerization followed by lateral aggregation, packing into fibrin fibers, and consequent branching. Shedding light on fibrin clots by in situ cross-linking mass spectrometry and structural modeling extends our current knowledge of the structure of fibrin with regard to receptor-binding hotspots. Further restraint-driven molecular docking reveals how fibrin oligomers laterally aggregate into clots and uncovers the molecular architecture of the clot to albumin interaction. We hypothesize this interaction is involved in the prevention of clot degradation. Mapping known mutations validates the generated structural model and, for a subset, brings their molecular mechanisms into view.

Upon activation, fibrinogen forms large fibrin biopolymers that coalesce into clots which assist in wound healing. Limited insights into their molecular architecture, due to the sheer size and the insoluble character of fibrin clots, have restricted our ability to develop novel treatments for clotting diseases. The, so far resolved, disparate structural details have provided insights into linear elongation; however, molecular details like the C-terminal domain of the α-chain, the heparin-binding domain on the β-chain, and other functional domains remain elusive. To illuminate these dark areas, we applied cross-linking mass spectrometry (XL-MS) to obtain biochemical evidence in the form of over 300 distance constraints and combined this with structural modeling. These restraints additionally define the interaction network of the clots and provide molecular details for the interaction with human serum albumin (HSA). We were able to construct the structural models of the fibrinogen α-chain (excluding two highly flexible regions) and the N termini of the β-chain, confirm these models with known structural arrangements, and map how the structure laterally aggregates to form intricate lattices together with the γ-chain. We validate the final model by mapping mutations leading to impaired clot formation. From a list of 22 mutations, we uncovered structural features for all, including a crucial role for βArg’169 (UniProt: 196) in lateral aggregation. The resulting model can potentially serve for research on dysfibrinogenemia and amyloidosis as it provides insights into the molecular mechanisms of thrombosis and bleeding disorders related to fibrinogen variants. The structure is provided in the PDB-DEV repository (PDBDEV_00000030).

Oxidation-induced destabilization of the fibrinogen αC-domain dimer investigated by molecular dynamics simulations

Upon activation, fibrinogen is converted to insoluble fibrin, which assembles into long strings called protofibrils. These aggregate laterally to form a fibrin matrix that stabilizes a blood clot. Lateral aggregation of protofibrils is mediated by the αC domain, a partially structured fragment located in a disordered region of fibrinogen. Polymerization of αC domains links multiple fibrin molecules with each other enabling the formation of thick fibrin fibers and a fibrin matrix that is stable but can also be digested by enzymes. However, oxidizing agents produced during the inflammatory response have been shown to cause thinner fibrin fibers resulting in denser clots, which are harder to proteolyze and pose the risk of deep vein thrombosis and lung embolism. Oxidation of Met⁴⁷⁶ located within the αC domain is thought to hinder its ability to polymerize disrupting the lateral aggregation of protofibrils and leading to the observed thinner fibers. How αC domains assemble into polymers is still unclear and yet this knowledge would shed light on the mechanism through which oxidation weakens the lateral aggregation of protofibrils. This study used temperature replica exchange molecular dynamics simulations to investigate the αC-domain dimer and how this is affected by oxidation of Met⁴⁷⁶ . Analysis of the trajectories revealed that multiple stable binding modes were sampled between two αC domains while oxidation decreased the likelihood of dimer formation. Furthermore, the side chain of Met⁴⁷⁶ was observed to act as a docking spot for the binding and this function was impaired by its conversion to methionine sulfoxide.

Atomic Structural Models of Fibrin Oligomers

The space-filling fibrin network is a major part of clots and thrombi formed in blood. Fibrin polymerization starts when fibrinogen, a plasma protein, is proteolytically converted to fibrin, which self-assembles to form double-stranded protofibrils. When reaching a critical length, these intermediate species aggregate laterally to transform into fibers arranged into branched fibrin network. We combined multiscale modeling in silico with atomic force microscopy (AFM) imaging to reconstruct complete atomic models of double-stranded fibrin protofibrils with γ-γ crosslinking, A:a and B:b knob-hole bonds, and αC regions-all important structural determinants not resolved crystallographically. Structures of fibrin oligomers and protofibrils containing up to 19 monomers were successfully validated by quantitative comparison with high-resolution AFM images. We characterized the protofibril twisting, bending, kinking, and reversibility of A:a knob-hole bonds, and calculated hydrodynamic parameters of fibrin oligomers. Atomic structures of protofibrils provide a basis to understand mechanisms of early stages of fibrin polymerization.

Biophysical Mechanisms Mediating Fibrin Fiber Lysis

The formation and dissolution of blood clots is both a biochemical and a biomechanical process. While much of the chemistry has been worked out for both processes, the influence of biophysical properties is less well understood. This review considers the impact of several structural and mechanical parameters on lytic rates of fibrin fibers. The influences of fiber and network architecture, fiber strain, FXIIIa cross-linking, and particle transport phenomena will be assessed. The importance of the mechanical aspects of fibrinolysis is emphasized, and future research avenues are discussed.

Structural properties of fracture haematoma: current status and future clinical implications

Blood clots (haematomas) that form immediately following a bone fracture have been shown to be vital for the subsequent healing process. During the clotting process, a number of factors can influence the fibrin clot structure, such as fibrin polymerization, growth factor binding, cellular infiltration (including platelet retraction), protein concentrations and cytokines. The modulation of the fibrin clot structure within the fracture site has important clinical implications and could result in the development of multifunctional scaffolds that mimic the natural structure of a haematoma. Artificial haematoma structures such as these can be created from the patient's own blood and can therefore act as an ideal bone defect filling material for potential clinical application to accelerate bone regeneration. Copyright © 2016 John Wiley & Sons, Ltd.

Molecular Dynamics Simulations of the Initial Adsorption Stages of Fibrinogen on Mica and Graphite Surfaces

Fibrinogen, a blood glycoprotein of vertebrates, plays an essential role in blood clotting by polymerizing into fibrin when activated. Upon adsorption on material surfaces, it also contributes to determine their biocompatibility and has been implicated in the onset of thrombosis and inflammation at medical implants. Here we present the first fully atomistic simulations of the initial stages of the adsorption process of fibrinogen on mica and graphite surfaces. The simulations reveal a weak adsorption on mica that allows frequent desorption and reorientation events. This adsorption is driven by electrostatic interactions between the protein and the silicate surface as well as the counterion layer. Preferred adsorption orientations for the globular regions of the protein are identified. The adsorption on graphite is found to be stronger with fewer reorientation and desorption events and shows the onset of denaturation of the protein.

Fibrin-based biomaterials: modulation of macroscopic properties through rational design at the molecular level

Fibrinogen is one of the primary components of the coagulation cascade and rapidly forms an insoluble matrix following tissue injury. In addition to its important role in hemostasis, fibrin acts as a scaffold for tissue repair and provides important cues for directing cell phenotype following injury. Because of these properties and the ease of polymerization of the material, fibrin has been widely utilized as a biomaterial for over a century. Modifying the macroscopic properties of fibrin, such as elasticity and porosity, has been somewhat elusive until recently, yet with a molecular-level rational design approach it can now be somewhat easily modified through alterations of molecular interactions key to the protein's polymerization process. This review outlines the biochemistry of fibrin and discusses methods for modification of molecular interactions and their application to fibrin based biomaterials.

Structural effects of methionine oxidation on isolated subdomains of human fibrin D and αC regions

Oxidation of key methionine residues on fibrin leads to altered fibrin polymerization producing severely altered fibrin gel structure and function. This is important because fibrinogen and its modification by oxidative stress have been implicated as key contributors to both pathological thrombotic and hemorrhagic diseases ranging from cardiovascular thrombosis to the acute coagulopathy of trauma. However, how oxidation leads to altered fibrin polymerization remains poorly understood at the molecular level. We have applied a powerful and novel well-tempered ensemble parallel tempering (PT-WTE) technique along with conventional molecular dynamics (MD) simulation to investigate the molecular-level consequences of selective methionine oxidation of fibrinogen. We offer new insights into molecular mechanisms of oxidation-induced changes in fibrin polymerization, while focusing on the D region knob ‘B’ and hole ‘b’ interaction and αC-domain interactions, both of which are hypothesized to contribute to the lateral aggregation mechanism of fibrin fibrils. Methionine oxidation did not alter the native state or the stability of a bound knob ‘B’ surrogate when interacting with hole ‘b’ in the D region. However, applying PT-WTE simulation to a human homology model of the bovine N-terminal subdomain fragment from the αC-domain revealed that methionine oxidation altered the conformation of the hairpin-linking region to favor open rather than closed hairpin structures. We attribute this alteration to the disruption of the hairpin-linking region's conformation, with oxidation increasing the radius of gyration for this segment. This result is in agreement with experimental data demonstrating decreased fibrin protofibril lateral aggregation when methionine oxidation is present in the same αC-domain fragment. Therefore, single methionine oxidation within the αC-domain is a likely molecular mechanism.

Structural insights into fibrinogen dynamics using amide hydrogen/deuterium exchange mass spectrometry

We determined the amide hydrogen/deuterium exchange profile of native human fibrinogen under physiologic conditions. After optimization of the quench and proteolysis conditions, more than 1,200 peptides were identified by mass spectrometry, spanning more than 90% of the constituent Aα, Bβ, and γ chain amino acid sequences. The compact central and distal globular regions of fibrinogen were well protected from deuterium exchange, with the exception of the unfolded amino-terminal segments of the Aα and Bβ chains extending from the central region, and the short γ chain "tail" extending from each distal globular region. The triple-helical coiled-coil regions, which bridge the central region to each distal region, were also well protected with the exception of a moderately fast-exchanging area in the middle of each coiled-coil adjacent to the γ chain carbohydrate attachment site. These dynamic regions appear to provide flexibility to the fibrinogen molecule. The γ chain "out loop" contained within each coiled-coil also exchanged rapidly. The αC domain (Aα 392-610) exchanged rapidly, with the exception of a short segment sandwiched between a conserved disulfide linkage in the N-terminal αC subdomain. This latter finding is consistent with a mostly disordered structure for the αC domain in native fibrinogen. Analysis of the dysfibrinogen Bβ 235 Pro/Leu, which exhibits abnormal fibrin structure, revealed enhanced deuterium exchange surrounding the Pro/Leu substitution site as well as in the vicinity of the high affinity calcium binding site and the A knob polymerization pocket within the γC domain. The implication of these changes with respect to fibrin structure is discussed.

Hydrodynamic characterization of recombinant human fibrinogen species

INTRODUCTION

Fibrinogen is a key component of the blood coagulation system and plays important, diverse roles in several relevant pathologies such as thrombosis, hemorrhage, and cancer. It is a large glycoprotein whose three-dimensional molecular structure is not fully known. Furthermore, circulating fibrinogen is highly heterogeneous, mainly due to proteolytic degradation and alternative mRNA processing. Recombinant production of human fibrinogen allows investigating the impact on the three-dimensional structure of specific changes in the primary structure.

METHODS

We performed analytical ultracentrifugation analyses of a full-length recombinant human fibrinogen, its counterpart purified from human plasma, and a recombinant human fibrinogen with both Aα chains truncated at amino acid 251, thus missing their last 359 amino acid residues.

RESULTS

We have accurately determined the translational diffusion and sedimentation coefficients (Dt(20,w)(0), s(20,w)(0)) of all three species. This was confirmed by derived molecular weights within 1% for the full length species, and 5% for the truncated species, as assessed by comparison with SDS-PAGE/Western blot analyses and primary structure data. No significant differences in the values of Dt(20,w)(0) and s(20,w)(0) were found between the recombinant and purified full length human fibrinogens, while slightly lower and higher values, respectively, resulted for the recombinant truncated human fibrinogen compared to a previously characterized purified human fibrinogen fragment X obtained by plasmin digestion.

CONCLUSIONS

Full-length recombinant fibrinogen is less polydisperse but hydrodynamically indistinguishable from its counterpart purified from human plasma. Recombinant Aα251-truncated human fibrinogen instead behaves differently from fragment X, suggesting a role for the Bβ residues 1-52 in inter-molecular interactions. Overall, these new hydrodynamic data will constitute a reliable benchmark against which models of fibrinogen species could be compared.

On the mechanism of αC polymer formation in fibrin

Our previous studies revealed that the fibrinogen αC-domains undergo conformational changes and adopt a physiologically active conformation upon their self-association into αC polymers in fibrin. In the present study, we analyzed the mechanism of αC polymer formation and tested our hypothesis that self-association of the αC-domains occurs through the interaction between their N-terminal subdomains and may include β-hairpin swapping. Our binding experiments performed by size-exclusion chromatography and optical trap-based force spectroscopy revealed that the αC-domains self-associate exclusively through their N-terminal subdomains, while their C-terminal subdomains were found to interact with the αC-connectors that tether the αC-domains to the bulk of the molecule. This interaction should reinforce the structure of αC polymers and provide the proper orientation of their reactive residues for efficient cross-linking by factor XIIIa. Molecular modeling of self-association of the N-terminal subdomains confirmed that the hypothesized β-hairpin swapping does not impose any steric hindrance. To "freeze" the conformation of the N-terminal subdomain and prevent the hypothesized β-hairpin swapping, we introduced by site-directed mutagenesis an extra disulfide bond between two β-hairpins of the bovine Aα406-483 fragment corresponding to this subdomain. The experiments performed by circular dichroism revealed that Aα406-483 mutant containing Lys429Cys/Thr463Cys mutations preserved its β-sheet structure. However, in contrast to wild-type Aα406-483, this mutant had lower tendency for oligomerization, and its structure was not stabilized upon oligomerization, in agreement with the above hypothesis. On the basis of the results obtained and our previous findings, we propose a model of fibrin αC polymer structure and molecular mechanism of assembly.

Structure, stability, and interaction of fibrin αC-domain polymers

Our previous studies revealed that in fibrinogen the αC-domains are not reactive with their ligands, suggesting that their binding sites are cryptic and become exposed upon its conversion to fibrin, in which these domains form αC polymers. On the basis of this finding, we hypothesized that polymerization of the αC-domains in fibrin results in the exposure of their binding sites and that these domains adopt the physiologically active conformation only in αC-domain polymers. To test this hypothesis, we prepared a recombinant αC region (residues Aα221-610) including the αC-domain (Aα392-610), demonstrated that it forms soluble oligomers in a concentration-dependent and reversible manner, and stabilized such oligomers by covalently cross-linking them with factor XIIIa. Cross-linked Aα221-610 oligomers were stable in solution and appeared as ordered linear, branching filaments when analyzed by electron microscopy. Spectral studies revealed that the αC-domains in such oligomers were folded into compact structures of high thermal stability with a significant amount of β-sheets. These findings indicate that cross-linked Aα221-610 oligomers are highly ordered and mimic the structure of fibrin αC polymers. The oligomers also exhibited functional properties of polymeric fibrin because, in contrast to the monomeric αC-domain, they bound tPA and plasminogen and stimulated activation of the latter by the former. Altogether, the results obtained with cross-linked Aα221-610 oligomers clarify the structure of the αC-domains in fibrin αC polymers and confirm our hypothesis that their binding sites are exposed upon polymerization. Such oligomers represent a stable, soluble model of fibrin αC polymers that can be used for further structure-function studies of fibrin αC-domains.

Molecular mechanisms affecting fibrin structure and stability

Fibrin structure and stability have been linked to many thrombotic diseases, including venous thromboembolism. Analysis of the molecular mechanisms that affect fibrin structure and stability became possible when the crystal structure of fibrinogen was solved. Biochemical studies of natural and recombinant variant fibrinogens have examined the interactions that mediate the conversion of soluble fibrinogen to the insoluble fibrin network. These studies identified intermolecular interactions that control fibrin structure, although some critical events remain ambiguous. Studies show that fibrin structure modulates the enzymatic lysis of the fibrin network, so the molecular mechanisms that control structure also control stability. Studies show that the mechanical stability of the fibrin clot depends on the properties of the fibrin monomer, leading investigators to explore the molecular basis of the monomer's mechanical properties. The work summarized here provides insights that might allow the development of pharmaceuticals and treatments to modulate fibrin structure and stability in vivo and thereby prevent or limit thrombotic disease.

The molecular origins of the mechanical properties of fibrin

When normal blood circulation is compromised by damage to vessel walls, clots are formed at the site of injury. These clots prevent bleeding and support wound healing. To sustain such physiological functions, clots are remarkably extensible and elastic. Fibrin fibers provide the supporting framework of blood clots, and the properties of these fibers underlie the mechanical properties of clots. Recent studies, which examined individual fibrin fibers or cylindrical fibrin clots, have shown that the mechanical properties of fibrin depend on the mechanical properties of the individual fibrin monomers. Within the fibrin monomer, three structures could contribute to these properties: the coiled-coil connectors the folded globular nodules and the relatively unstructured αC regions. Experimental data suggest that each of these structures contributes. Here we review the recent work with a focus on the molecular origins of the remarkable biomechanical properties of fibrin clots.

Role of fibrin structure in thrombosis and vascular disease

Fibrin clot formation is a key event in the development of thrombotic disease and is the final step in a multifactor coagulation cascade. Fibrinogen is a large glycoprotein that forms the basis of a fibrin clot. Each fibrinogen molecule is comprised of two sets of Aα, Bβ, and γ polypeptide chains that form a protein containing two distal D regions connected to a central E region by a coiled-coil segment. Fibrin is produced upon cleavage of the fibrinopeptides by thrombin, which can then form double-stranded half staggered oligomers that lengthen into protofibrils. The protofibrils then aggregate and branch, yielding a three-dimensional clot network. Factor XIII, a transglutaminase, cross-links the fibrin stabilizing the clot protecting it from mechanical stress and proteolytic attack. The mechanical properties of the fibrin clot are essential for its function as it must prevent bleeding but still allow the penetration of cells. This viscoelastic property is generated at the level of each individual fiber up to the complete clot. Fibrinolysis is the mechanism of clot removal, and involves a cascade of interacting zymogens and enzymes that act in concert with clot formation to maintain blood flow. Clots vary significantly in structure between individuals due to both genetic and environmental factors and this has an effect on clot stability and susceptibility to lysis. There is increasing evidence that clot structure is a determinant for the development of disease and this review will discuss the determinants for clot structure and the association with thrombosis and vascular disease.

The interplay between tissue plasminogen activator domains and fibrin structures in the regulation of fibrinolysis: kinetic and microscopic studies

Regulation of tissue-type plasminogen activator (tPA) depends on fibrin binding and fibrin structure. tPA structure/function relationships were investigated in fibrin formed by high or low thrombin concentrations to produce a fine mesh and small pores, or thick fibers and coarse structure, respectively. Kinetics studies were performed to investigate plasminogen activation and fibrinolysis in the 2 types of fibrin, using wild-type tPA (F-G-K1-K2-P, F and K2 binding), K1K1-tPA (F-G-K1-K1-P, F binding), and delF-tPA (G-K1-K2-P, K2 binding). There was a trend of enzyme potency of tPA > K1K1-tPA > delF-tPA, highlighting the importance of the finger domain in regulating activity, but the differences were less apparent in fine fibrin. Fine fibrin was a better surface for plasminogen activation but more resistant to lysis. Scanning electron and confocal microscopy using orange fluorescent fibrin with green fluorescent protein-labeled tPA variants showed that tPA was strongly associated with agglomerates in coarse but not in fine fibrin. In later lytic stages, delF-tPA-green fluorescent protein diffused more rapidly through fibrin in contrast to full-length tPA, highlighting the importance of finger domain-agglomerate interactions. Thus, the regulation of fibrinolysis depends on the starting nature of fibrin fibers and complex dynamic interaction between tPA and fibrin structures that vary over time.

[Molecular mechanisms of the polymerization of fibrin and the formation of its three-dimensional network]

The results of biochemical, immunochemical, and X-ray studies of the structures of fibrinogen and fibrin molecules were analyzed. The mechanisms of the successive formation of the fibrin three-dimensional network were described: the polymerization of monomeric molecules with the formation of bifilar protofibrils, the lateral association of protofibrils, and the embranchment of the forming fibrils. Data on the electron and confocal microscopy of the polymeric fibrin were considered. The role of the known polymerization centers of fibrin which participated in the formation of protofibrils and their lateral association was discussed. Data on the existence of the previously unknown polymerization centers were given. In particular, the experimental results demonstrated that one of such centers which participated in the formation of protofibrils was located in the Bbeta12-46 fragment, and did not require the cleavage of fibrinopeptide B for its functioning. The results of the computer modeling of the spatial structure of the fibrin(ogen) molecule and the intermolecular interactions in the course of the fibrin polymerization were presented. The location of the alphaC domains in the fibrin(ogen) molecule and their role in the polymerization process were discussed. Information on the structure of the calcium-binding sites of fibrin(ogen) and the functional role of Ca2+ in fibrin polymerization was published. The structure of factor XIII(a) and the mechanisms of fibrin stabilization by this factor were briefly described.

Structure, stability, and interaction of the fibrin(ogen) alphaC-domains

Our recent study established the NMR structure of the recombinant bAalpha406-483 fragment corresponding to the NH(2)-terminal half of the bovine fibrinogen alphaC-domain and revealed that at increasing concentrations this fragment forms oligomers (self-associates). The major goals of the study presented here were to determine the structure and self-association of the full-length human fibrinogen alphaC-domains. To accomplish these goals, we prepared a recombinant human fragment, hAalpha425-503, homologous to bovine bAalpha406-483, and demonstrated using NMR, CD, and size-exclusion chromatography that its overall fold and ability to form oligomers are similar to those of bAalpha406-483. We also prepared recombinant hAalpha392-610 and bAalpha374-568 fragments corresponding to the full-length human and bovine alphaC-domains, respectively, and tested their structure, stability, and ability to self-associate. Size-exclusion chromatography revealed that both fragments form reversible oligomers in a concentration-dependent manner. Their oligomerization was confirmed in sedimentation equilibrium experiments, which also established the self-association affinities of these fragments and revealed that the addition of each monomer to assembling alphaC-oligomers substantially increases the stabilizing free energy. In agreement, unfolding experiments monitored by CD established that self-association of both fragments results in a significant increase in their thermal stability. Analysis of CD spectra of both fragments revealed that alphaC self-association results in an increase in the level of regular structure, implying that the COOH-terminal half of the alphaC-domain adopts an ordered conformation in alphaC-oligomers and that this domain contains two independently folded subdomains. Altogether, these data further clarify the structure of the human and bovine alphaC-domains and the molecular mechanism of their self-association into alphaC-polymers in fibrin.

Hydrodynamic and mass spectrometry analysis of nearly-intact human fibrinogen, chicken fibrinogen, and of a substantially monodisperse human fibrinogen fragment X

The shape and solution properties of fibrinogen are affected by the location of the C-terminal portion of the Aalpha chains, which is presently still controversial. We have measured the hydrodynamic properties of a human fibrinogen fraction with these appendages mostly intact, of chicken fibrinogen, where they lack 11 characteristic 13-amino acids repeats, and of human fragment X, a plasmin early degradation product in which they have been removed. The human fibrinogen/fragment X samples were extensively characterized by SDS-PAGE/Western blotting and mass spectrometry, allowing their composition to be precisely determined. The solution properties of all samples were then investigated by analytical ultracentrifugation and size-exclusion HPLC coupled with multi-angle light scattering and differential pressure viscometry detectors. The measured parameters suggest that the extra repeats have little influence on the overall fibrinogen conformation, while a significant change is brought about by the removal of the C-terminal portion of the Aalpha chains beyond residue Aalpha200.

Interaction of fibrin(ogen) with the endothelial cell receptor VE-cadherin: localization of the fibrin-binding site within the third extracellular VE-cadherin domain

Interaction of fibrin with endothelial cells through their receptor VE-cadherin has been implicated in modulation of angiogenesis and inflammation. Previous studies identified the VE-cadherin-binding site in the fibrin betaN-domains formed by the NH(2)-terminal regions of fibrin beta chains and revealed that the recombinant dimeric (beta15-66)(2) fragment mimicking these domains preserves the VE-cadherin-binding properties of fibrin. To test if the other fibrin(ogen) regions/domains are involved in this interaction and localize the complementary fibrin-binding site in VE-cadherin, we prepared several recombinant fragments containing individual extracellular domains of VE-cadherin or combinations thereof, as well as several fragments corresponding to various fibrin(ogen) regions, and tested the interactions between them by ELISA and surface plasmon resonance. The experiments revealed that the betaN-domains are the only fibrin(ogen) regions involved in the interaction with VE-cadherin. They also localized the fibrin-binding site to the third extracellular domain of VE-cadherin and established that the fibrin-binding properties of this domain are not influenced by the presence or absence of the neighboring domains. In addition, the experiments confirmed that calcium ions, which are required to maintain proper conformation and adhesive properties of VE-cadherin, do not influence the fibrin-binding properties of the latter.

Crystal structure of human fibrinogen

A crystal structure of human fibrinogen has been determined at approximately 3.3 A resolution. The protein was purified from human blood plasma, first by a cold ethanol precipitation procedure and then by stepwise chromatography on DEAE-cellulose. A product was obtained that was homogeneous on SDS-polyacrylamide gels. Nonetheless, when individual crystals used for X-ray diffraction were examined by SDS gel electrophoresis after data collection, two species of alpha chain were present, indicating that some proteolysis had occurred during the course of operations. Amino-terminal sequencing on post-X-ray crystals showed mostly intact native alpha- and gamma-chain sequences (the native beta chain is blocked). The overall structure differs from that of a native fibrinogen from chicken blood and those reported for a partially proteolyzed bovine fibrinogen in the nature of twist in the coiled-coil regions, likely due to weak forces imparted by unique crystal packing. As such, the structure adds to the inventory of possible conformations that may occur in solution. Other features include a novel interface with an antiparallel arrangement of beta chains and a unique tangential association of coiled coils from neighboring molecules. The carbohydrate groups attached to beta chains are unusually prominent, the full sweep of 11 sugar residues being positioned. As was the case for native chicken fibrinogen, no resolvable electron density could be associated with alphaC domains.

A neoantigenic determinant in coiled coil region of human fibrin beta-chain

INTRODUCTION

The transformation of fibrinogen into fibrin by thrombin exposes neoantigenic determinants that are buried in fibrinogen. Fibrin-specific monoclonal antibodies (mAbs) to these neoantigenic determinants, which don't react with fibrinogen, can be obtained. The aim of our investigation was to obtain fibrin-specific mAbs, to study their influence on fibrin polymerization and to use them for quantification of soluble fibrin in human blood plasma.

MATERIALS AND METHODS

Human fibrin desAABB in 2 M urea was used as an antigen. Standard hybridoma technique was used for production of mAbs. Turbidity analysis and transmission electron microscopy were used to study the effect of mAbs and their Fab-fragment on fibrin polymerization. The localization of epitope for mAb in fibrin molecule was determined using ELISA and immunoblot analysis with fibrinogen, fibrin desAA, fibrin desAABB and various fibrin(ogen) fragments.

RESULTS

A mAb FnI-3C has been obtained that doesn't bind to fibrinogen and reacts with fibrin desAA and fibrin desAABB with K(D) value of 9.7610(-10) M. The epitope for this mAb proved to be localized in the fibrin fragment Bbeta118-134. MAb FnI-3C and its Fab retarded specifically the stage of fibrin protofibril lateral association.

CONCLUSIONS

A fibrin-specific mAb FnI-3C has been obtained to fibrin fragment Bbeta118-134 which may be a contact site taking a part in protofibril lateral association. MAb FnI-3C was used as a "catch"-one in double-sandwich ELISA for soluble fibrin quantification in human blood plasma.

Influence of glutathione and its derivatives on fibrin polymerization

A complex relationship exists between reduced, oxidized, and nitrosated glutathione (GSH, GSSG, and GSNO, respectively). Although previous studies have demonstrated S-nitrosoglutathione (GSNO) has potent antiplatelet efficacy, little work has examined the role of GSNO and related species on subsequent aspects of coagulation (e.g., fibrin polymerization). Herein, the effects of GSH, GSSG, and GSNO on the entire process of fibrin polymerization are described. Relative to normal fibrinogen, the addition of GSH, GSSG, or GSNO leads to prolonged lag times, slower rates of protofibril lateral aggregation and the formation of clots with lower final turbidities. Dose-dependent studies indicate the influence of GSH on fibrin formation is a function of both GSH and fibrinogen concentration. Studies with Aalpha251 recombinant fibrinogen (lacking alphaC regions) showed GSH had no influence on its polymerization, suggesting the glutathione species interact within the alphaC region of fibrinogen.