Differential proximity probing of two DNA binding sites in the Escherichia coli recA protein using photo-cross-linking methods

Modeling the Homologous Recombination Process: Methods, Successes and Challenges

Homologous recombination (HR) is a fundamental process common to all species. HR aims to faithfully repair DNA double strand breaks. HR involves the formation of nucleoprotein filaments on DNA single strands (ssDNA) resected from the break. The nucleoprotein filaments search for homologous regions in the genome and promote strand exchange with the ssDNA homologous region in an unbroken copy of the genome. HR has been the object of intensive studies for decades. Because multi-scale dynamics is a fundamental aspect of this process, studying HR is highly challenging, both experimentally and using computational approaches. Nevertheless, knowledge has built up over the years and has recently progressed at an accelerated pace, borne by increasingly focused investigations using new techniques such as single molecule approaches. Linking this knowledge to the atomic structure of the nucleoprotein filament systems and the succession of unstable, transient intermediate steps that takes place during the HR process remains a challenge; modeling retains a very strong role in bridging the gap between structures that are stable enough to be observed and in exploring transition paths between these structures. However, working on ever-changing long filament systems submitted to kinetic processes is full of pitfalls. This review presents the modeling tools that are used in such studies, their possibilities and limitations, and reviews the advances in the knowledge of the HR process that have been obtained through modeling. Notably, we will emphasize how cooperative behavior in the HR nucleoprotein filament enables modeling to produce reliable information.

Real-time tracking reveals catalytic roles for the two DNA binding sites of Rad51

During homologous recombination, Rad51 forms a nucleoprotein filament on single-stranded DNA to promote DNA strand exchange. This filament binds to double-stranded DNA (dsDNA), searches for homology, and promotes transfer of the complementary strand, producing a new heteroduplex. Strand exchange proceeds via two distinct three-strand intermediates, C1 and C2. C1 contains the intact donor dsDNA whereas C2 contains newly formed heteroduplex DNA. Here, we show that the conserved DNA binding motifs, loop 1 (L1) and loop 2 (L2) in site I of Rad51, play distinct roles in this process. L1 is involved in formation of the C1 complex whereas L2 mediates the C1–C2 transition, producing the heteroduplex. Another DNA binding motif, site II, serves as the DNA entry position for initial Rad51 filament formation, as well as for donor dsDNA incorporation. Our study provides a comprehensive molecular model for the catalytic process of strand exchange mediated by eukaryotic RecA-family recombinases.

Rad51 drives DNA strand exchange, the central reaction in recombinational DNA repair. Two sites of Rad51 are responsible for DNA binding, but the function of these sites has proven elusive. Here, the authors employ real-time assays to reveal catalytic roles for the two DNA binding sites of Rad51.

HOP2-MND1 modulates RAD51 binding to nucleotides and DNA

The HOP2-MND1 heterodimer is required for progression of homologous recombination in eukaryotes. In vitro, HOP2-MND1 stimulates the DNA strand exchange activities of RAD51 and DMC1. We demonstrate that HOP2-MND1 induces changes in the conformation of RAD51 that profoundly alter the basic properties of RAD51. HOP2-MND1 enhances the interaction of RAD51 with nucleotide cofactors and modifies its DNA binding specificity in a manner that stimulates DNA strand exchange. It enables RAD51 DNA strand exchange in the absence of divalent metal ions required for ATP binding and offsets the effect of the K133A mutation that disrupts ATP binding. During nucleoprotein formation HOP2-MND1 helps to load RAD51 on ssDNA restricting its dsDNA-binding and during the homology search it promotes dsDNA binding removing the inhibitory effect of ssDNA. The magnitude of the changes induced in RAD51 defines HOP2-MND1 as a “molecular trigger” of RAD51 DNA strand exchange.

Homologous Recombination-Enzymes and Pathways

Homologous recombination is an ubiquitous process that shapes genomes and repairs DNA damage. The reaction is classically divided into three phases: presynaptic, synaptic, and postsynaptic. In Escherichia coli, the presynaptic phase involves either RecBCD or RecFOR proteins, which act on DNA double-stranded ends and DNA single-stranded gaps, respectively; the central synaptic steps are catalyzed by the ubiquitous DNA-binding protein RecA; and the postsynaptic phase involves either RuvABC or RecG proteins, which catalyze branch-migration and, in the case of RuvABC, the cleavage of Holliday junctions. Here, we review the biochemical properties of these molecular machines and analyze how, in light of these properties, the phenotypes of null mutants allow us to define their biological function(s). The consequences of point mutations on the biochemical properties of recombination enzymes and on cell phenotypes help refine the molecular mechanisms of action and the biological roles of recombination proteins. Given the high level of conservation of key proteins like RecA and the conservation of the principles of action of all recombination proteins, the deep knowledge acquired during decades of studies of homologous recombination in bacteria is the foundation of our present understanding of the processes that govern genome stability and evolution in all living organisms.

Two modes of binding of DinI to RecA filament provide a new insight into the regulation of SOS response by DinI protein

RecA protein plays a principal role in bacterial SOS response to DNA damage. The induction of the SOS response is well understood and involves the cleavage of the LexA repressor catalyzed by the RecA nucleoprotein filament. In contrast, our understanding of the regulation and termination of the SOS response is much more limited. RecX and DinI are two major regulators of RecA's ability to promote LexA cleavage and strand exchange reaction, and are believed to modulate its activity in ongoing SOS events. DinI's function in the SOS response remains controversial, since its interaction with the RecA filament is concentration dependent and may result in either stabilization or depolymerization of the filament. The 17 C-terminal residues of RecA modulate the interaction between DinI and RecA. We demonstrate that DinI binds to the active RecA filament in two distinct structural modes. In the first mode, DinI binds to the C-terminus of a RecA protomer. In the second mode, DinI resides deeply in the groove of the RecA filament, with its negatively charged C-terminal helix proximal to the L2 loop of RecA. The deletion of the 17 C-terminal residues of RecA favors the second mode of binding. We suggest that the negatively charged C-terminus of RecA prevents DinI from entering the groove and protects the RecA filament from depolymerization. Polymorphic binding of DinI to RecA filaments implies an even more complex role of DinI in the bacterial SOS response.

Loop 2 in Saccharomyces cerevisiae Rad51 protein regulates filament formation and ATPase activity

Previous studies showed that the K342E substitution in the Saccharomyces cerevisiae Rad51 protein increases the interaction with Rad54 protein in the two-hybrid system, leads to increased sensitivity to the alkylating agent MMS and hyper-recombination in an oligonucleotide-mediated gene targeting assay. K342 localizes in loop 2, a region of Rad51 whose function is not well understood. Here, we show that Rad51-K342E displays DNA-independent and DNA-dependent ATPase activities, owing to its ability to form filaments in the absence of a DNA lattice. These filaments exhibit a compressed pitch of 81 Å, whereas filaments of wild-type Rad51 and Rad51-K342E on DNA form extended filaments with a 97 Å pitch. Rad51-K342E shows near normal binding to ssDNA, but displays a defect in dsDNA binding, resulting in less stable protein-dsDNA complexes. The mutant protein is capable of catalyzing the DNA strand exchange reaction and is insensitive to inhibition by the early addition of dsDNA. Wild-type Rad51 protein is inhibited under such conditions, because of its ability to bind dsDNA. No significant changes in the interaction between Rad51-K342E and Rad54 could be identified. These findings suggest that loop 2 contributes to the primary DNA-binding site in Rad51, controlling filament formation and ATPase activity.

Molecular Design and Functional Organization of the RecA Protein

The bacterial RecA protein participates in a remarkably diverse set of functions, all of which are involved in the maintenance of genomic integrity. RecA is a central component in both the catalysis of recombinational DNA repair and the regulation of the cellular SOS response. Despite the mechanistic differences of its functions, all require formation of an active RecA/ATP/DNA complex. RecA is a classic allosterically regulated enzyme, and ATP binding results in a dramatic increase in DNA binding affinity and a cooperative assembly of RecA subunits to form an ordered, helical nucleoprotein filament. The molecular events that underlie this ATP-induced structural transition are becoming increasingly clear. This review focuses on descriptions of our current understanding of the molecular design and allosteric regulation of RecA. We present a comprehensive list of all published recA mutants and use the results of various genetic and biochemical studies, together with available structural information, to develop ideas regarding the design of RecA functional domains and their catalytic organization.

Mechanism of homologous recombination from the RecA-ssDNA/dsDNA structures

The RecA family of ATPases mediates homologous recombination, a reaction essential for maintaining genomic integrity and for generating genetic diversity. RecA, ATP and single-stranded DNA (ssDNA) form a helical filament that binds to double-stranded DNA (dsDNA), searches for homology, and then catalyses the exchange of the complementary strand, producing a new heteroduplex. Here we have solved the crystal structures of the Escherichia coli RecA-ssDNA and RecA-heteroduplex filaments. They show that ssDNA and ATP bind to RecA-RecA interfaces cooperatively, explaining the ATP dependency of DNA binding. The ATP gamma-phosphate is sensed across the RecA-RecA interface by two lysine residues that also stimulate ATP hydrolysis, providing a mechanism for DNA release. The DNA is underwound and stretched globally, but locally it adopts a B-DNA-like conformation that restricts the homology search to Watson-Crick-type base pairing. The complementary strand interacts primarily through base pairing, making heteroduplex formation strictly dependent on complementarity. The underwound, stretched filament conformation probably evolved to destabilize the donor duplex, freeing the complementary strand for homology sampling.

RecA-DNA filament topology: the overlooked alternative of an unconventional syn-syn duplex intermediate

The helical filaments of RecA protein mediate strand exchange for homologous recombination, but the paths of the interacting DNAs have yet to be determined. Although this interaction is commonly limited to three strands, it is reasoned here that the intrinsic symmetry relationships of quadruplex topology are superior in explaining a range of observations. In particular, this topology suggests the potential of post-exchange base pairing in the unorthodox configuration of syn-syn glycosidic bonds between the nucleotide bases and the pentose rings in the sugar-phosphate backbone, which would transiently be stabilized by the external scaffolding of the RecA protein filament.

Calorimetric analysis of binding of two consecutive DNA strands to RecA protein illuminates mechanism for recognition of homology

RecA protein recognises two complementary DNA strands for homologous recombination. To gain insight into the molecular mechanism, the thermodynamic parameters of the DNA binding have been characterised by isothermal calorimetry. Specifically, conformational changes of protein and DNA were searched for by measuring variations in enthalpy change (DeltaH) with temperature (heat capacity change, DeltaC(p)). In the presence of the ATP analogue ATPgammaS, the DeltaH for the binding of the first DNA strand depends upon temperature (large DeltaC(p)) and the type of buffer, in a way that is consistent with the organisation of disordered parts and the protonation of RecA upon complex formation. In contrast, the binding of the second DNA strand occurs without any pronounced DeltaC(p), indicating the absence of further reorganisation of the RecA-DNA filament. In agreement with these findings, a significant change in the CD spectrum of RecA was observed only upon the binding of the first DNA strand. In the absence of nucleotide cofactor, the DeltaH of DNA binding is almost independent of temperature, indicating a requirement for ATP in the reorganisation of RecA. When the second DNA strand is complementary to the first, the DeltaH is larger than that for non-complementary DNA strand, but less than the DeltaH of the annealing of the complementary DNA without RecA. This small DeltaH could reflect a weak binding that may facilitate the dissociation of only partly complementary DNA and thus speed the search for complementary DNA. The DeltaH of binding DNA sequences displaying strong base-base stacking is small for both the first and second binding DNA strand, suggesting that the second is also stretched upon interaction with RecA. These results support the proposal that the RecA protein restructures DNA, preparing it for the recognition of a complementary second DNA strand, and that the recognition is due mainly to direct base-base contacts between DNA strands.

Visualizing the assembly of human Rad51 filaments on double-stranded DNA

Rad51 is the core component of the eukaryotic homologous recombination machinery and assembles into extended nucleoprotein filaments on DNA. To study the dynamic behavior of Rad51 we have developed a single-molecule assay that relies on a combination of hydrodynamic force and microscale diffusion barriers to align individual DNA molecules on the surface of a microfluidic sample chamber that is coated with a lipid bilayer. When visualized with total internal reflection fluorescence microscopy (TIRFM), these "molecular curtains" allow for the direct visualization of hundreds of individual DNA molecules. Using this approach, we have analyzed the binding of human Rad51 to single molecules of double-stranded DNA under a variety of different reaction conditions by monitoring the extension of the fluorescently labeled DNA, which coincides with assembly of the nucleoprotein filament. We have also generated several mutants in conserved regions of Rad51 implicated in DNA binding, and tested them for their ability to assemble into extended filaments. We show that proteins with mutations within the DNA-binding surface located on the N-terminal domain still retain the ability to form extended nucleoprotein filaments. Mutations in the L1 loop, which projects towards the central axis of the filament, completely abolish assembly of extended filaments. In contrast, most mutations within or near the L2 DNA-binding loop, which is also located near the central axis of the filament, do not affect the ability of the protein to assemble into extended filaments on double-stranded (ds)DNA. Taken together, these results demonstrate that the L1-loop plays a crucial role in the assembly of extended nucleoprotein filaments on dsDNA, but the N-terminal domain and the L2 DNA-binding loop have significantly less impact on this process. The results presented here also provide an important initial framework for beginning to study the biochemical behaviors of Rad51 nucleoprotein filaments using our novel experimental system.

Roles of the human Rad51 L1 and L2 loops in DNA binding

The human Rad51 protein, a eukaryotic ortholog of the bacterial RecA protein, is a key enzyme that functions in homologous recombination and recombinational repair of double strand breaks. The Rad51 protein contains two flexible loops, L1 and L2, which are proposed to be sites for DNA binding, based on a structural comparison with RecA. In the present study, we performed mutational and fluorescent spectroscopic analyses on the L1 and L2 loops to examine their role in DNA binding. Gel retardation and DNA-dependent ATP hydrolysis measurements revealed that the substitution of the tyrosine residue at position 232 (Tyr232) within the L1 loop with alanine, a short side chain amino acid, significantly decreased the DNA-binding ability of human Rad51, without affecting the protein folding or the salt-induced, DNA-independent ATP hydrolysis. Even the conservative replacement with tryptophan affected the DNA binding, indicating that Tyr232 is involved in DNA binding. The importance of the L1 loop was confirmed by the fluorescence change of a tryptophan residue, replacing the Asp231, Ser233, or Gly236 residue, upon DNA binding. The alanine replacement of phenylalanine at position 279 (Phe279) within the L2 loop did not affect the DNA-binding ability of human Rad51, unlike the Phe203 mutation of the RecA L2 loop. The Phe279 side chain may not be directly involved in the interaction with DNA. However, the fluorescence intensity of the tryptophan replacing the Rad51-Phe279 residue was strongly reduced upon DNA binding, indicating that the L2 loop is also close to the DNA-binding site.

A novel strategy for the identification of protein-DNA contacts by photocrosslinking and mass spectrometry

Photochemical crosslinking is a method for studying the molecular details of protein-nucleic acid interactions. In this study, we describe a novel strategy to localize crosslinked amino acid residues that combines laser-induced photocrosslinking, proteolytic digestion, Fe3+-IMAC (immobilized metal affinity chromatography) purification of peptide-oligodeoxynucleotide heteroconjugates and hydrolysis of oligodeoxynucleotides by hydrogen fluoride (HF), with efficient matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS). The new method is illustrated by the identification of the DNA-binding site of the restriction endonuclease MboI. Photoactivatable 5-iododeoxyuridine was incorporated into a single site within the DNA recognition sequence (GATC) of MboI. Ultraviolet irradiation of the protein-DNA complex with a helium/cadmium laser at 325 nm resulted in 15% crosslinking yield. Proteolytic digestion with different proteases produced various peptide-oligodeoxynucleotide adducts that were purified together with free oligodeoxynucleotide by Fe3+-IMAC. A combination of MS analysis of the peptide-nucleosides obtained after hydrolysis by HF and their fragmentation by MS/MS revealed that Lys209 of MboI was crosslinked to the MboI recognition site at the position of the adenine, demonstrating that the region around Lys209 is involved in specific binding of MboI to its DNA substrate. This method is suitable for the fast identification of the site of contact between proteins and nucleic acids starting from picomole quantities of crosslinked complexes.

Crystal structure of archaeal recombinase RADA: a snapshot of its extended conformation

Homologous recombination of DNA plays crucial roles in repairing severe DNA damage and in generating genetic diversity. The process is facilitated by a superfamily of recombinases: bacterial RecA, archaeal RadA and Rad51, and eukaryal Rad51 and DMC1. These recombinases share a common ATP-dependent filamentous quaternary structure for binding DNA and facilitating strand exchange. We have determined the crystal structure of Methanococcus voltae RadA in complex with the ATP analog AMP-PNP at 2.0 A resolution. The RadA filament is a 106.7 A pitch helix with six subunits per turn. The DNA binding loops L1 and L2 are located in close proximity to the filament axis. The ATP analog is buried between two RadA subunits, a feature similar to that of the active filament of Escherichia coli RecA revealed by electron microscopy. The disposition of the N-terminal domain suggests a role of the Helix-hairpin-Helix motif in binding double-stranded DNA.

Aggregation of RecA-derived peptides on single-stranded oligonucleotides triggered by schiff base-mediated crosslinking

We here show that single-stranded oligonucleotides containing 5-formyl-2'-deoxyuridine (fdU) can crosslink the peptides derived from the DNA binding site of RecA protein through a Schiff base formation. The ability of crosslinking of fdU-containing oligonucleotides was investigated using a series of peptides whose amino acid residues spanning the center of the RecA-derived peptide were sequentially replaced with lysine. Circular dichroism (CD) spectroscopy, gel mobility shift assay and sedimentation experiment demonstrated that crosslinking reaction proceeded efficiently only when the peptides bound to the oligonucleotides.

The bacterial RecA protein and the recombinational DNA repair of stalled replication forks

The primary function of bacterial recombination systems is the nonmutagenic repair of stalled or collapsed replication forks. The RecA protein plays a central role in these repair pathways, and its biochemistry must be considered in this context. RecA protein promotes DNA strand exchange, a reaction that contributes to fork regression and DNA end invasion steps. RecA protein activities, especially formation and disassembly of its filaments, affect many additional steps. So far, Escherichia coli RecA appears to be unique among its nearly ubiquitous family of homologous proteins in that it possesses a motorlike activity that can couple the branch movement in DNA strand exchange to ATP hydrolysis. RecA is also a multifunctional protein, serving in different biochemical roles for recombinational processes, SOS induction, and mutagenic lesion bypass. New biochemical and structural information highlights both the similarities and distinctions between RecA and its homologs. Increasingly, those differences can be rationalized in terms of biological function.

Arrangement of RecA protein in its active filament determined by polarized-light spectroscopy

Linear dichroism (LD) polarized-light spectroscopy is used to determine the arrangement of RecA in its large filamentous complex with DNA, active in homologous recombination. Angular orientation data for two tryptophan and seven tyrosine residues, deduced from differential LD of wild-type RecA vs. mutants that were engineered to attenuate the UV absorption of selected residues, revealed a rotation by some 40 degrees of the RecA subunits relative to the arrangement in crystal without DNA. In addition, conformational changes are observed for tyrosine residues assigned to be involved in DNA binding and in RecA-RecA contacts, thus potentially related to the global structure of the filament and its biological function. The presented spectroscopic approach, called "Site-Specific Linear Dichroism" (SSLD), may find forceful applications also to other biologically important fibrous complexes not amenable to x-ray crystallographic or NMR structural analysis.

Asymmetric photocross-linking pattern of restriction endonuclease EcoRII to the DNA recognition sequence

The EcoRII homodimer engages two of its recognition sequences (5'-CCWGG) simultaneously and is therefore a type IIE restriction endonuclease. To identify the amino acids of EcoRII that interact specifically with the recognition sequence, we photocross-linked EcoRII with oligonucleotide substrates that contained only one recognition sequence for EcoRII. In this recognition sequence, we substituted either 5-iododeoxycytidine for each C or 5-iododeoxyuridine for A, G, or T. These iodo-pyrimidine bases were excited using a UV laser to result in covalent cross-linking products. The yield of EcoRII photocross-linked to the 5'-C of the 5'-CCAGG strand of the recognition sequence was 45%. However, we could not photocross-link EcoRII to the 5'-C of the 5'-CCTGG strand. Thus, the contact of EcoRII to the bases of the recognition sequence appears to be asymmetric, unlike that expected for most type II restriction endonucleases. Tryptic digestion of free and of cross-linked EcoRII, followed by high performance liquid chromatography (HPLC) separation of the individual peptides and Edman degradation, identified amino acids 25-49 of EcoRII as the cross-linking peptide. Mutational analysis of the electron-rich amino acids His(36) and Tyr(41) of this peptide indicates that Tyr(41) is the amino acid involved in the cross-link and that it therefore contributes to specific DNA recognition by EcoRII.

Methionine proximity assay, a novel method for exploring peptide ligand-receptor interaction

Probing G-protein coupled receptor (GPCR) structures is a priority in the functional and structural understanding of GPCRs. In the past, we have used several approaches around photoaffinity labeling in order to establish contact points between peptide ligands and their cognate receptors. Such contact points are helpful to build reality based molecular models of GPCRs and to elucidate their activation mechanisms. Most studies of peptidergic GPCRs have been done with photolabeling peptides containing the benzophenone moiety as a reputedly non-selective probe. However our recent results are now showing that p-benzoylphenylalanine (Bpa) has some selectivity for Met residues in the receptor protein, reducing the accuracy of this method. Turning a problem into an asset, modified analogues of Bpa, e.g. p,p'-nitrobenzoylphenylalanine (NO2Bpa), display increased selectivity for such Met residues. It means a photoprobe containing such modified benzophenone-moieties does not label a receptor protein unless a Met residue is in the immediate vicinity. This unique property allows us to propose and show the feasibility and utility of a new method for scanning the contact areas of peptidergic GPCRs, the Methionine Proximity Assay (MPA). Putative contact residues of the receptor are exchanged to Met residues by site-directed mutagenesis and are subjected to photoaffinity labeling with such modified benzophenone-containing peptides. Successful incorporation indicates physical proximity of those residues. This principle is established and explored with benzophenone-containing analogues of angiotensin II and the two known human angiotensin II receptors AT1 and AT2, determining contact points in both receptors. This approach has several important advantages over other scanning approaches, e.g., the SCAM procedure, since the MPA-method can be used in the hydrophobic core of receptors.

Mass spectrometric analysis of a UV-cross-linked protein-DNA complex: tryptophans 54 and 88 of E. coli SSB cross-link to DNA

Protein-nucleic acid complexes are commonly studied by photochemical cross-linking. UV-induced cross-linking of protein to nucleic acid may be followed by structural analysis of the conjugated protein to localize the cross-linked amino acids and thereby identify the nucleic acid binding site. Mass spectrometry is becoming increasingly popular for characterization of purified peptide-nucleic acid heteroconjugates derived from UV cross-linked protein-nucleic acid complexes. The efficiency of mass spectrometry-based methods is, however, hampered by the contrasting physico-chemical properties of nucleic acid and peptide entities present in such heteroconjugates. Sample preparation of the peptide-nucleic acid heteroconjugates is, therefore, a crucial step in any mass spectrometry-based analytical procedure. This study demonstrates the performance of four different MS-based strategies to characterize E. coli single-stranded DNA binding protein (SSB) that was UV-cross-linked to a 5-iodouracil containing DNA oligomer. Two methods were optimized to circumvent the need for standard liquid chromatography and gel electrophoresis, thereby dramatically increasing the overall sensitivity of the analysis. Enzymatic degradation of protein and oligonucleotide was combined with miniaturized sample preparation methods for enrichment and desalting of cross-linked peptide-nucleic acid heteroconjugates from complex mixtures prior to mass spectrometric analysis. Detailed characterization of the peptidic component of two different peptide-DNA heteroconjugates was accomplished by matrix-assisted laser desorption/ionization mass spectrometry and allowed assignment of tryptophan-54 and tryptophan-88 as candidate cross-linked residues. Sequencing of those peptide-DNA heteroconjugates by nanoelectrospray quadrupole time-of-flight tandem mass spectrometry identified tryptophan-54 and tryptophan-88 as the sites of cross-linking. Although the UV-cross-linking yield of the protein-DNA complex did not exceed 15%, less than 100 pmole of SSB protein was required for detailed structural analysis by mass spectrometry.

Equilibrium binding of single-stranded DNA to the secondary DNA binding site of the bacterial recombinase RecA

The bacterial recombinase RecA forms a nucleoprotein filament in vitro with single-stranded DNA (ssDNA) at its primary DNA binding site, site I. This filament has a second site, site II, which binds ssDNA and double-stranded DNA. We have investigated the binding of ssDNA to the RecA protein in the presence of adenosine 5'-O-(thiotriphosphate) cofactor using fluorescence anisotropy. The RecA protein carried out DNA strand exchange with a 5'-fluorescein-labeled 32-mer oligonucleotide. The anisotropy signal was shown to measure oligonucleotide binding to RecA, and the relationship between signal and binding density was determined. Binding of ssDNA to site I of RecA was stable at high NaCl concentrations. Binding to site II could be described by a simple two-state equilibrium, K = 4.5 +/- 1.5 x 10(5) m(-1) (37 degrees C, 150 mm NaCl, pH 7.4). The reaction was enthalpy-driven and entropy-opposed. It depended on salt concentration and was sensitive to the type of monovalent anion, suggesting that anion-dependent protein conformations contribute to ssDNA binding at site II.

Interaction of tyrosine 65 of RecA protein with the first and second DNA strands

We investigated the structure of the active RecA-DNA complex by analyzing the environment of tyrosine residue 65, which is on the DNA-binding surface of the protein. We prepared a modified RecA protein in which the tyrosine residue was replaced by tryptophan, a natural fluorescent reporter, and measured the change in its fluorescence upon binding of DNA and cofactor. The fluorescence of the inserted tryptophan 65 (Trp65) was centered at 345 nm, indicating a partly exposed residue. Binding cofactor, adenosine 5'-O-3-thiotriphosphate (ATPgammaS), alone at a low salt concentration did not change the fluorescence of Trp65, confirming that the residue is not close to the nucleotide. In contrast, the binding of single-stranded DNA quenched the fluorescence of Trp65 in both the presence and absence of ATPgammaS. Trp65 fluorescence was also quenched upon binding a second DNA strand. The fluorescence change depended upon the presence and absence of ATPgammaS, reflecting the difference in the DNA binding. These results indicate that residue 65 is close to both the first and second DNA strands. The degree of quenching depended upon the base composition of DNA, suggesting that the residue 65 interacts with the DNA bases. Binding of DNA with ATPgammaS as well as binding of ATPgammaS alone at high salt concentration shifted the fluorescence emission peak from 345 to 330 nm, indicating a change from a polar to a non-polar environment. Therefore, the environment change around residue 65 would also be linked to a change in conformation and thus the activation of the protein.

Phe217 regulates the transfer of allosteric information across the subunit interface of the RecA protein filament

BACKGROUND

ATP-mediated cooperative assembly of a RecA nucleoprotein filament activates the protein for catalysis of DNA strand exchange. RecA is a classic allosterically regulated enzyme in that ATP binding results in a dramatic increase in ssDNA binding affinity. This increase in ssDNA binding affinity results almost exclusively from an ATP-mediated increase in cooperative filament assembly rather than an increase in the inherent affinity of monomeric RecA for DNA. Therefore, certain residues at the subunit interface must play an important role in transmitting allosteric information across the filament structure of RecA.

RESULTS

Using electron microscopic analysis of RecA polymer formation in the absence of DNA, we show that while wild-type RecA undergoes a slight decrease in filament length in the presence of ATP, a Phe217Tyr substitution results in a dramatic ATP-induced increase in cooperative filament assembly. Biosensor DNA binding measurements reveal that the Phe217Tyr mutation increases ATP-mediated cooperative interaction between RecA subunits by more than 250-fold.

CONCLUSIONS

These studies represent the first identification of a subunit interface residue in RecA (Phe217) that plays a critical role in regulating the flow of ATP-mediated information throughout the protein filament structure. We propose a model by which conformational changes that occur upon ATP binding are propagated through the structure of a RecA monomer, resulting in the insertion of the Phe217 side chain into a pocket in the neighboring subunit. This event serves as a key step in intersubunit communication leading to ATP-mediated cooperative filament assembly and high affinity binding to ssDNA.

The homologous pairing domain of RecA also mediates the allosteric regulation of DNA binding and ATP hydrolysis: a remarkable concentration of functional residues

Switching between the active (ATP and DNA bound) and inactive conformations of the homologous recombination RecA protein is regulated by ATP hydrolysis. First, we use the homologous pairing domain of RecA derived from its mobile loop L2 to show that the interaction of this random coil peptide with the gamma-phosphate of ATP results in a peptide beta-conformation similar to that previously shown to be induced by DNA binding. Next, we show that in the whole RecA protein two residues in this L2 domain, Gln194 and Arg196, are catalytic amino acid residues for ATP hydrolysis and functionally resemble the corresponding residues engaged in GTP hydrolysis by two distinct classes of G proteins. Finally, we show that the role of DNA and high salt in the stimulation of the ATPase of RecA is to stabilize this highly mobile region involved in hydrolysis. This is a role similar to that described for RGSs in the activation of the GTPase of heterotrimeric G proteins. Therefore, (i) a prototypical DNA-dependent ATPase and ATP-stimulated DNA-binding protein, RecA, and eukaryotic signaling proteins share common stereochemical regulatory mechanisms; and (ii) in a remarkable example of parsimony, loop L2 is a molecular switch that controls both ATP promoted DNA binding and pairing reactions and DNA stimulated ATP hydrolysis.

A model for the PI-SceIxDNA complex based on multiple base and phosphate backbone-specific photocross-links

We have synthesized different oligodeoxynucleotides carrying, in single positions of the >36 bp recognition site of PI-SceI, photoreactive base analogues (5-iododeoxypyrimidines) or phosphate modifications (p-azidophenacylphosphorothioates) and used them in photocross-linking experiments with PI-SceI to probe the protein-DNA interface of the specific complex between the homing endonuclease PI-SceI and its DNA substrate. One base-specific and several backbone-specific cross-links were analyzed in detail: the cross-linking positions were identified by Edman degradation of isolated cross-linked peptidexoligodeoxynucleotide adducts and confirmed by site-directed mutagenesis. Based on these results and the crystal structure of PI-SceI, a model for the structure of the PI-SceIxDNA complex is proposed.

Radioprobing of a RecA-three-stranded DNA complex with iodine 125: evidence for recognition of homology in the major groove of the target duplex

A fundamental problem in homologous recombination is how homology between DNAs is recognized. In all current models, a recombination protein loads onto a single strand of DNA and scans another duplex for homology. When homology is found, a synaptic complex is formed, leading to strand exchange and a heteroduplex. A novel technique based on strand cleavage by the Auger radiodecay of iodine 125, allows us to determine the distances between (125)I on the incoming strand and the target sugars of the duplex DNA strands in an Escherichia coli RecA protein-mediated synaptic complex. Analysis of these distances shows that the complex represents a post-strand exchange intermediate in which the heteroduplex is located in the center, while the outgoing strand forms a relatively wide helix intertwined with the heteroduplex and located in its minor groove. The structure implies that homology is recognized in the major groove of the duplex.

Identification of a base-specific contact between the restriction endonuclease SsoII and its recognition sequence by photocross-linking

A target sequence-specific DNA binding region of the restriction endonuclease Sso II was identified by photocross-linking with an oligodeoxynucleotide duplex which was substituted with 5-iododeoxy-uridine (5-IdU) at the central position of the Sso II recognition site (CCNGG). For this purpose the Sso II-DNA complex was irradiated with a helium/cadmium laser (325 nm). The cross-linking yield obtained was approximately 50%. In the presence of excess unmodified oligodeoxynucleotide or with oligode-oxynucleotides substituted with 5-IdU elsewhere, no cross-linking was observed, indicating the specificity of the cross-linking reaction. The cross-linked Sso II-oligodeoxynucleotide complex was digested with chymotrypsin, a cross-linked peptide-oligodeoxy-nucleotide complex isolated and the site of cross-linking identified by Edman sequencing to be Trp61. In line with this identification is the finding that the W61A variant cannot be cross-linked with the IdU-substituted oligodeoxynucleotide, shows a decrease in affinity towards DNA and is inactive in cleavage. It is concluded that the region around Trp61 is involved in specific binding of Sso II to its DNA substrate.

Difference between active and inactive nucleotide cofactors in the effect on the DNA binding and the helical structure of RecA filament dissociation of RecA--DNA complex by inactive nucleotides

The RecA protein requires ATP or dATP for its coprotease and strand exchange activities. Other natural nucleotides, such as ADP, CTP, GTP, UTP and TTP, have little or no activation effect on RecA for these activities. We have investigated the activation mechanism, and the selectivity for ATP, by studying the effect of various nucleotides on the DNA binding and the helical structure of the RecA filament. The interaction with DNA was investigated via fluorescence measurements with a fluorescent DNA analog and fluorescein-labeled oligonucleotides, assisted by linear dichroism. Filament structure was investigated via small-angle neutron scattering. There is no simple correlation between filament elongation, DNA binding affinity of RecA, and DNA structure in the RecA complex. There may be multiple conformations of RecA. Both coprotease and strand exchange activities require formation of a rigid and well organized complex. The triphosphate nucleotides which do not activate RecA, destabilize the RecA-DNA complex, indicating that the chemical nature of the nucleotide nucleobase is very important for the stability of RecA-DNA complex. Higher stability of the RecA-DNA complex in the presence of adenosine 5'-O-3-thiotriphosphate or guanosine 5'-O-3-thiotriphosphate than ATP or GTP indicates that contact between the protein and the chemical group at the gamma position of the nucleotide also affects the stability of the RecA-DNA complex. This contact appears also important for the rigid organization of DNA because ADP strongly decreases the rigidity of the complex.

Photocross-linking of the homing endonuclease PI-SceI to its recognition sequence

PI-SceI is an intein-encoded protein that belongs to the LAGLIDADG family of homing endonucleases. According to the crystal structure and mutational studies, this endonuclease consists of two domains, one responsible for protein splicing, the other for DNA cleavage, and both presumably for DNA binding. To define the DNA binding site of PI-SceI, photocross-linking was used to identify amino acid residues in contact with DNA. Sixty-three double-stranded oligodeoxynucleotides comprising the minimal recognition sequence and containing single 5-iodopyrimidine substitutions in almost all positions of the recognition sequence were synthesized and irradiated in the presence of PI-SceI with a helium/cadmium laser (325 nm). The best cross-linking yield (approximately 30%) was obtained with an oligodeoxynucleotide with a 5-iododeoxyuridine at position +9 in the bottom strand. The subsequent analysis showed that cross-linking had occurred with amino acid His-333, 6 amino acids after the second LAGLIDADG motif. With the H333A variant of PI-SceI or in the presence of excess unmodified oligodeoxynucleotide, no cross-linking was observed, indicating the specificity of the cross-linking reaction. Chemical modification of His residues in PI-SceI by diethylpyrocarbonate leads to a substantial reduction in the binding and cleavage activity of PI-SceI. This inactivation can be suppressed by substrate binding. This result further supports the finding that at least one His residue is in close contact to the DNA. Based on these and published results, conclusions are drawn regarding the DNA binding site of PI-SceI.

Saturation mutagenesis of the E. coli RecA loop L2 homologous DNA pairing region reveals residues essential for recombination and recombinational repair

The disordered mobile loop L2 of the Escherichia coli RecA protein is known to play a central role in DNA binding and pairing. To investigate the local chemical environment in relation to function we performed saturation mutagenesis of the loop L2 region (amino acid positions 193-212) using a site-directed mutagenesis procedure, and determined the recombinational proficiency of the 380 mutants using genetic assays for homologous recombination and recombinational repair. Residues Asn193, Gln194, Arg196, Glu207, Thr209, Gly211, and Gly212 were identified as stringently required for recombinational events in bacterial cells. In addition, our findings suggest the involvement of loop L2 in the ATPase activity of RecA, and a role for residues Gln194, Arg196, Lys198 and Thr209 in the DNA-dependent hydrolysis of ATP. Finally, since 20 residue peptides that comprise this region can pair homologous DNAs by forming filamentous beta-structures, we propose how the information from the mutant analysis might facilitate the use of a simplified amino acid alphabet to design beta-structure forming L2 peptides with improved RecA-like activities.

The L2 loop peptide of RecA stiffens and restricts base motions of single-stranded DNA similar to the intact protein

The L2 loop in the RecA protein is the catalytic center for DNA strand exchange. Here we investigate the DNA binding properties of the L2 loop peptide using optical spectroscopy with polarized light. Both fluorescence intensity and anisotropy of an etheno-modified poly(dA) increase upon peptide binding, indicate that the base motions of single-stranded DNA are restricted in the complex. In agreement with this conclusion, the peptide-poly(dT) complex exhibits a significant linear dichroism signal. The peptide is also found to modify the structure of double-stranded DNA, but does not denature it. It is inferred that strand separation may not be required for the formation of a joint molecule.

Investigation of the secondary DNA-binding site of the bacterial recombinase RecA

The L2 loop is a DNA-binding site of RecA protein, a recombinase from Eschericha coli. Two DNA-binding sites have been functionally defined in this protein. To determine whether the L2 loop of RecA protein is part of the primary or secondary binding site, we have constructed proteins with site-specific mutations in the loop and investigated their biological, biochemical, and DNA binding properties. The mutation E207Q inhibits DNA repair and homologous recombination in vivo and prevents DNA strand exchange in vitro (Larminat, F., Cazaux, C., Germanier, M., and Defais, M. (1992) J. Bacteriol. 174, 6264-6269; Cazaux, C., Larminat, F., Villani, G., Johnson, N. P., Schnarr, M., and Defais, M. (1994) J. Biol. Chem. 269, 8246-8254). We have found that mutant protein RecAE207Q lacked one of the two single stranded DNA-binding sites of wild type RecA. The remaining site was functional, and biochemical activities of the mutant protein were the same as wild type RecA with ssDNA in the primary binding site. The second mutation, E207K, reduced but did not eliminate DNA repair, SOS induction, and homologous recombination in vivo. In the presence of ATP, mutant protein RecAE207K catalyzed DNA strand exchange in vitro at a slower rate than wild type protein, and ssDNA binding at site I was competitively inhibited. These results show that the L2 loop is or is part of the functional secondary DNA-binding site of RecA protein.

An interaction between a specified surface of the C-terminal domain of RecA protein and double-stranded DNA for homologous pairing

RecA protein and its homologs catalyze homologous pairing of dsDNA and ssDNA, a critical reaction in homologous genetic recombination in various organisms from a virus, microbes to higher eukaryotes. In this reaction, RecA protein forms a nucleoprotein filament on ssDNA, which in turn binds to naked dsDNA for homology search. We suggested that the C-terminal domain of RecA protein plays a role in capturing the dsDNA. Here, we isolated the C-terminal domain as a soluble form and determined the solution structure by NMR spectroscopy. The overall folding of the NMR structure agrees with that of the corresponding part of the reported crystal structure, but a remarkable difference was found in a solvent-exposed region due to intermolecular contacts in the crystal. Then, we studied the interaction between the C-terminal domain and DNA, and found that significant chemical shift changes were induced in a specific region by titration with dsDNA. SsDNA induced a much smaller chemical shift perturbation. The difference of DNA concentrations to give the half-saturation of the chemical shift change showed a higher affinity of the C-terminal region toward dsDNA. Combined with our previous results, these provide direct evidence that the defined region in the C-terminal domain furnishes a binding surface for DNA.

Local folding of the N-terminal domain of Escherichia coli RecA controls protein-protein interaction

To obtain structural information about the self-association of the protein RecA, we studied urea denaturation of RecA by circular dichroism spectroscopy and gel filtration. Gel filtration analysis showed that urea at low concentrations, 1.0-1.2 M, dissociated the RecA oligomer to almost a monomeric state prior to the unfolding of each molecule. Upon treatment with 1.0 M urea, the circular dichroism spectrum showed a decrease in the alpha-helical content of RecA. A similar decrease was observed in the absence of urea for RecA at an extremely low protein concentration; the RecA oligomer dissociated to an almost completely monomeric state. The properties of RecA at low urea concentrations were similar to those of a truncated RecA lacking the first 33 N-terminal residues (Delta33RecA). Addition of a synthetic peptide corresponding to the 33 N-terminal residues to Delta33RecA increased the alpha-helical content. These results suggest that local folding of the N-terminal domain is coupled to protein-protein interactions of monomeric RecA, which are involved in the regulation of filament formation. The dissociation constant for interaction between RecA monomers was determined from the ellipticity data to be 0.1 microM.

Photocross-linking of the NH2-terminal region of Taq MutS protein to the major groove of a heteroduplex DNA

The MutS DNA mismatch repair protein recognizes heteroduplex DNAs containing mispaired or unpaired bases. To identify regions of MutS protein in close proximity to the heteroduplex DNA, we have utilized the photoactivated cross-linking moiety 5-iododeoxyuridine (5-IdUrd). Nucleoprotein complexes of Thermus aquaticus MutS protein bound to monosubstituted 5-IdUrd-containing heteroduplex DNAs were cross-linked with long-wavelength ultraviolet light. Positioning of the 5-IdUrd moiety at one of three positions within the DNA bulge, two nucleotides upstream or three nucleotides downstream of the unpaired base, resulted in an identical subset of cross-linked peptides as determined by proteolytic fingerprinting. The tryptic peptide cross-linked to an unpaired 5-IdUrd residue was determined by peptide sequencing to correspond to a highly conserved region spanning residues 25-49. Cross-linking to the bulge nucleotide occurred at Phe-39, indicating that this residue contacts, or is in close proximity to, the unpaired base of a heteroduplex DNA. Site-directed mutagenesis resulting in the substitution of Ala for Phe-39 reduced the affinity of the mutant protein for heteroduplex DNA by roughly 3 orders of magnitude, but had no apparent effect on its ability to dimerize, its thermostability, or its ATPase activity. These results implicate the region in the vicinity of Phe-39 as being crucial for heteroduplex DNA binding by Taq MutS protein.

Locations of functional domains in the RecA protein. Overlap of domains and regulation of activities

We review the locations of various functional domains of the RecA protein of Escherichia coli, including how they have been assigned, and discuss the potential regulatory roles of spatial overlap between different domains. RecA is a multifunctional and ubiquitous protein involved both in general genetic recombination and in DNA repair: it regulates the synthesis and activity of DNA repair enzymes (SOS induction) and catalyses homologous recombination and mutagenesis. For these activities RecA interacts with a nucleotide cofactor, single-stranded and double-stranded DNAs, the LexA repressor, UmuD protein, the UmuD'2C complex as well as with RecA itself in forming the catalytically active nucleofilament. Attempts to locate the respective interaction sites have been advanced in order to understand the various functions of RecA. An intriguing question is how these numerous functional sites are contained within this rather small protein (38 kDa). To assess more clearly the roles of the respective sites and to what extent the sites may be interacting with each other, we review and compare the results obtained from various biological, biochemical and physico-chemical approaches. From a three-dimensional model it is concluded that all sites are concentrated to one part of the protein. As a consequence there are significant overlaps between the sites and it is speculated that corresponding interactions may play important roles in regulating RecA activities.

Homologous DNA pairing promoted by a 20-amino acid peptide derived from RecA

The molecular structure of the Escherichia coli RecA protein in the absence of DNA revealed two disordered or mobile loops that were proposed to be DNA binding sites. A short peptide spanning one of these loops was shown to carry out the key reaction mediated by the whole RecA protein: pairing (targeting) of a single-stranded DNA to its homologous site on a duplex DNA. In the course of the reaction the peptide bound to both substrate DNAs, unstacked the single-stranded DNA, and assumed a beta structure. These events probably recapitulate the underlying molecular pathway or mechanism used by homologous recombination proteins.