Tubulin secondary structure analysis, limited proteolysis sites, and homology to FtsZ

Raman Spectroscopy Reveals Photobiomodulation-Induced α-Helix to β-Sheet Transition in Tubulins: Potential Implications for Alzheimer's and Other Neurodegenerative Diseases

In small clinical studies, the application of transcranial photobiomodulation (PBM), which typically delivers low-intensity near-infrared (NIR) to treat the brain, has led to some remarkable results in the treatment of dementia and several neurodegenerative diseases. However, despite the extensive literature detailing the mechanisms of action underlying PBM outcomes, the specific mechanisms affecting neurodegenerative diseases are not entirely clear. While large clinical trials are warranted to validate these findings, evidence of the mechanisms can explain and thus provide credible support for PBM as a potential treatment for these diseases. Tubulin and its polymerized state of microtubules have been known to play important roles in the pathology of Alzheimer's and other neurodegenerative diseases. Thus, we investigated the effects of PBM on these cellular structures in the quest for insights into the underlying therapeutic mechanisms. In this study, we employed a Raman spectroscopic analysis of the amide I band of polymerized samples of tubulin exposed to pulsed low-intensity NIR radiation (810 nm, 10 Hz, 22.5 J/cm2 dose). Peaks in the Raman fingerprint region (300-1900 cm-1)-in particular, in the amide I band (1600-1700 cm-1)-were used to quantify the percentage of protein secondary structures. Under this band, hidden signals of C=O stretching, belonging to different structures, are superimposed, producing a complex signal as a result. An accurate decomposition of the amide I band is therefore required for the reliable analysis of the conformation of proteins, which we achieved through a straightforward method employing a Voigt profile. This approach was validated through secondary structure analyses of unexposed control samples, for which comparisons with other values available in the literature could be conducted. Subsequently, using this validated method, we present novel findings of statistically significant alterations in the secondary structures of polymerized NIR-exposed tubulin, characterized by a notable decrease in α-helix content and a concurrent increase in β-sheets compared to the control samples. This PBM-induced α-helix to β-sheet transition connects to reduced microtubule stability and the introduction of dynamism to allow for the remodeling and, consequently, refreshing of microtubule structures. This newly discovered mechanism could have implications for reducing the risks associated with brain aging, including neurodegenerative diseases like Alzheimer's disease, through the introduction of an intervention following this transition.

Computational Design of Novel Griseofulvin Derivatives Demonstrating Potential Antibacterial Activity: Insights from Molecular Docking and Molecular Dynamics Simulation

In response to the urgent demand for innovative antibiotics, theoretical investigations have been employed to design novel analogs. Because griseofulvin is a potential antibacterial agent, we have designed novel derivatives of griseofulvin to enhance its antibacterial efficacy and to evaluate their interactions with bacterial targets using in silico analysis. The results of this study reveal that the newly designed derivatives displayed the most robust binding affinities towards PBP2, tyrosine phosphatase, and FtsZ proteins. Additionally, molecular dynamics (MD) simulations underscored the notable stability of these derivatives when engaged with the FtsZ protein, as evidenced by root mean square deviation (RMSD), root mean square fluctuation (RMSF), radius of gyration (Rg), and solvent-accessible surface area (SASA). Importantly, this observation aligns with expectations, considering that griseofulvin primarily targets microtubules in eukaryotic cells, and FtsZ functions as the prokaryotic counterpart to microtubules. These findings collectively suggest the promising potential of griseofulvin and its designed derivatives as effective antibacterial agents, particularly concerning their interaction with the FtsZ protein. This research contributes to the ongoing exploration of novel antibiotics and may serve as a foundation for future drug development efforts.

The bacterial tubulin homolog FtsZ generates electrical oscillations

FtsZ, a major cytoskeletal protein in all bacteria and archaea, forms a ring that directs cytokinesis. Bacterial FtsZ is considered the ancestral homolog of the eukaryotic microtubule (MT)-forming tubulins, sharing GTPase activity and the ability to assemble into protofilaments, rings, and sheets, but not MTs. Previous studies from our laboratory demonstrated that structures of isolated brain MTs spontaneously generate electrical oscillations and bursts of electrical activity similar to action potentials. No information about whether the prokaryotic tubulins may share similar properties is available. Here, we obtained by ammonium sulfate precipitation an enriched protein fraction of the endogenous FtsZ from wild-type Escherichia coli ATCC 25922 without any transfection or overexpression of the protein. As revealed by electron microscopy, FtsZ was detected by dot blot analysis and immunofluorescence that assembled into filaments and sheets in a polymerization buffer. We used the patch-clamp technique to explore the electrical properties of sheets of FtsZ and bacterial cells. Electrical recordings at various holding potentials ranging from ±200 mV showed a complex oscillatory behavior, with several peak frequencies between 12 and 110 Hz in the power spectra and a linear mean current response. To confirm the oscillatory electrical behavior of FtsZ we also conducted experiments with commercial recombinant FtsZ, with similar results. We also detected, by local field potentials, similar electrical oscillations in K+-depolarized pellets of E. coli cultures. FtsZ oscillations had a wider range of frequency peaks than MT sheets from eukaryotic origin. The findings indicate that the bacterial cytoskeleton generates electrical oscillators that may play a relevant role in cell division and unknown signaling mechanisms in bacterial populations.

Unrealized targets in the discovery of antibiotics for Gram-negative bacterial infections

Advances in areas that include genomics, systems biology, protein structure determination and artificial intelligence provide new opportunities for target-based antibacterial drug discovery. The selection of a 'good' new target for direct-acting antibacterial compounds is the first decision, for which multiple criteria must be explored, integrated and re-evaluated as drug discovery programmes progress. Criteria include essentiality of the target for bacterial survival, its conservation across different strains of the same species, bacterial species and growth conditions (which determines the spectrum of activity of a potential antibiotic) and the level of homology with human genes (which influences the potential for selective inhibition). Additionally, a bacterial target should have the potential to bind to drug-like molecules, and its subcellular location will govern the need for inhibitors to penetrate one or two bacterial membranes, which is a key challenge in targeting Gram-negative bacteria. The risk of the emergence of target-based drug resistance for drugs with single targets also requires consideration. This Review describes promising but as-yet-unrealized targets for antibacterial drugs against Gram-negative bacteria and examples of cognate inhibitors, and highlights lessons learned from past drug discovery programmes.

Mycobacterial FtsZ and inhibitors: a promising target for the anti-tubercular drug development

The emergence of multidrug-resistant tuberculosis (MDR-TB) strains has rendered many anti-TB drugs ineffective. Consequently, there is an urgent need to identify new drug targets against Mycobacterium tuberculosis (Mtb). Filament Forming Temperature Sensitive Gene Z (FtsZ), a member of the cytoskeletal protein family, plays a vital role in cell division by forming a cytokinetic ring at the cell's center and coordinating the division machinery. When FtsZ is depleted, cells are unable to divide and instead elongate into filamentous structures that eventually undergo lysis. Since the inactivation of FtsZ or alterations in its assembly impede the formation of the Z-ring and septum, FtsZ shows promise as a target for the development of anti-mycobacterial drugs. This review not only discusses the potential role of FtsZ as a promising pharmacological target for anti-tuberculosis therapies but also explores the structural and functional aspects of the mycobacterial protein FtsZ in cell division. Additionally, it reviews various inhibitors of Mtb FtsZ. By understanding the importance of FtsZ in cell division, researchers can explore strategies to disrupt its function, impeding the growth and proliferation of Mtb. Furthermore, the investigation of different inhibitors that target Mtb FtsZ expands the potential for developing effective treatments against tuberculosis.

Molecular Evolution of Tubulins in Diatoms

Microtubules are formed by α- and β-tubulin heterodimers nucleated with γ-tubulin. Tubulins are conserved eukaryotic proteins. Previously, it was shown that microtubules are involved in diatom silica frustule morphogenesis. Diatom frustules are varied, and their morphology is species-specific. Despite the attractiveness of the problem of elucidating the molecular mechanisms of genetically programmed morphogenesis, the structure and evolution of diatom tubulins have not been studied previously. Based on available genomic and transcriptome data, we analyzed the phylogeny of the predicted amino acid sequences of diatom α-, β- and γ-tubulins and identified five groups for α-tubulins, six for β-tubulins and four for γ-tubulins. We identified characteristic amino acids of each of these groups and also analyzed possible posttranslational modification sites of diatom tubulins. According to our results, we assumed what changes occurred in the diatom tubulin structures during their evolution. We also identified which tubulin groups are inherent in large diatom taxa. The similarity between the evolution of diatom tubulins and the evolution of diatoms suggests that molecular changes in α-, β- and γ-tubulins could be one of the factors in the formation of a high morphological diversity of diatoms.

Targeting the Achilles Heel of FtsZ: The Interdomain Cleft

Widespread antimicrobial resistance among bacterial pathogens is a serious threat to public health. Thus, identification of new targets and development of new antibacterial agents are urgently needed. Although cell division is a major driver of bacterial colonization and pathogenesis, its targeting with antibacterial compounds is still in its infancy. FtsZ, a bacterial cytoskeletal homolog of eukaryotic tubulin, plays a highly conserved and foundational role in cell division and has been the primary focus of research on small molecule cell division inhibitors. FtsZ contains two drug-binding pockets: the GTP binding site situated at the interface between polymeric subunits, and the inter-domain cleft (IDC), located between the N-terminal and C-terminal segments of the core globular domain of FtsZ. The majority of anti-FtsZ molecules bind to the IDC. Compounds that bind instead to the GTP binding site are much less useful as potential antimicrobial therapeutics because they are often cytotoxic to mammalian cells, due to the high sequence similarity between the GTP binding sites of FtsZ and tubulin. Fortunately, the IDC has much less sequence and structural similarity with tubulin, making it a better potential target for drugs that are less toxic to humans. Over the last decade, a large number of natural and synthetic IDC inhibitors have been identified. Here we outline the molecular structure of IDC in detail and discuss how it has become a crucial target for broad spectrum and species-specific antibacterial agents. We also outline the drugs that bind to the IDC and their modes of action.

Molecular Docking and Dynamics Simulation of Protein β-Tubulin and Antifungal Cyclic Lipopeptides

To elucidate interactions between the antifungal cyclic lipopeptides iturin A, fengycin, and surfactin produced by Bacillus bacteria and the microtubular protein β-tubulin in plant pathogenic fungi (Fusarium oxysporum, Colletrotrichum gloeosporioides, Alternaria alternata, and Fusarium solani) in molecular docking and molecular dynamics simulations, we retrieved the structure of tubulin co-crystallized with taxol from the Protein Data Bank (PDB) (ID: 1JFF) and the structure of the cyclic lipopeptides from PubChem (Compound CID: 102287549, 100977820, 10129764). Similarity and homology analyses of the retrieved β-tubulin structure with those of the fungi showed that the conserved domains shared 84% similarity, and the root mean square deviation (RMSD) was less than 2 Å. In the molecular docking studies, within the binding pocket, residues Pro274, Thr276, and Glu27 of β-tubulin were responsible for the interaction with the cyclic lipopeptides. In the molecular dynamics analysis, two groups of ligands were formed based on the number of poses analyzed with respect to the RMSD. Group 1 was made up of 10, 100, and 500 poses with distances 0.080 to 0.092 nm and RMSDs of 0.10 to 0.15 nm. For group 2, consisting of 1000 poses, the initial and final distance was 0.1 nm and the RMSDs were in the range of 0.10 to 0.30 nm. These results suggest that iturin A and fengycin bind with higher affinity than surfactin to β-tubulin. These two lipopeptides may be used as lead compounds to develop new antifungal agents or employed directly as biorational products to control plant pathogenic fungi.

Cosolvent and Crowding Effects on the Temperature- and Pressure-Dependent Dissociation Process of the α/β-Tubulin Heterodimer

Tubulin is one of the main components of the cytoskeleton of eukaryotic cells. The formation of microtubules depends strongly on environmental and solution conditions, and has been found to be among the most pressure sensitive processes in vivo. We explored the effects of different types of cosolvents, such as trimethylamine-N-oxide (TMAO), sucrose and urea, and crowding agents to mimic cell-like conditions, on the temperature and pressure stability of the building block of microtubules, i. e. the α/β-tubulin heterodimer. To this end, fluorescence and FTIR spectroscopy, differential scanning and pressure perturbation calorimetry as well as fluorescence anisotropy and correlation spectroscopies were applied. The pressure and temperature of dissociation of α/β-tubulin as well as the underlying thermodynamic parameters upon dissociation, such as volume and enthalpy changes, have been determined for the different solution conditions. The temperature and pressure of dissociation of the α/β-tubulin heterodimer and hence its stability increases dramatically in the presence of TMAO and the nanocrowder sucrose. We show that by adjusting the levels of compatible cosolutes and crowders, cells are able to withstand deteriorating effects of pressure even up to the kbar-range.

On the Origin of Microtubules' High-Pressure Sensitivity

For over 50 years, it has been known that the mitosis of eukaryotic cells is inhibited already at high hydrostatic pressure conditions of 30 MPa. This effect has been attributed to the disorganization of microtubules, the main component of the spindle apparatus. However, the structural details of the depolymerization and the origin of the pressure sensitivity have remained elusive. It has also been a puzzle how complex organisms could still successfully inhabit extreme high-pressure environments such as those encountered in the depth of oceans. We studied the pressure stability of microtubules at different structural levels and for distinct dynamic states using high-pressure Fourier-transform infrared spectroscopy and Synchrotron small-angle x-ray scattering. We show that microtubules are hardly stable under abyssal conditions, where pressures up to 100 MPa are reached. This high-pressure sensitivity can be mainly attributed to the internal voids and packing defects in the microtubules. In particular, we show that lateral and longitudinal contacts feature different pressure stabilities, and they define also the pressure stability of tubulin bundles. The intactness of both contact types is necessary for the functionality of microtubules in vivo. Despite being known to dynamically stabilize microtubules and prevent their depolymerization, we found that the anti-cancer drug taxol and the accessory protein MAP2c decrease the pressure stability of microtubule protofilaments. Moreover, we demonstrate that the cellular environment itself is a crowded place and accessory proteins can increase the pressure stability of microtubules and accelerate their otherwise highly pressure-sensitive de novo formation.

Exploring the influence of natural cosolvents on the free energy and conformational landscape of filamentous actin and microtubules

Natural osmolytes have a significant influence on the temperature- and pressure-dependent stability of filamentous actin and microtubules.

Lessons from bacterial homolog of tubulin, FtsZ for microtubule dynamics

FtsZ, a homolog of tubulin, is found in almost all bacteria and archaea where it has a primary role in cytokinesis. Evidence for structural homology between FtsZ and tubulin came from their crystal structures and identification of the GTP box. Tubulin and FtsZ constitute a distinct family of GTPases and show striking similarities in many of their polymerization properties. The differences between them, more so, the complexities of microtubule dynamic behavior in comparison to that of FtsZ, indicate that the evolution to tubulin is attributable to the incorporation of the complex functionalities in higher organisms. FtsZ and microtubules function as polymers in cell division but their roles differ in the division process. The structural and partial functional homology has made the study of their dynamic properties more interesting. In this review, we focus on the application of the information derived from studies on FtsZ dynamics to study microtubule dynamics and vice versa. The structural and functional aspects that led to the establishment of the homology between the two proteins are explained to emphasize the network of FtsZ and microtubule studies and how they are connected.

Identification of agents targeting FtsZ assembly

Filamenting temperature-sensitive mutant Z (FtsZ), an essential cell division protein in bacteria, has recently emerged as an important and exploitable antibacterial target. Cytokinesis in bacteria is regulated by the assembly dynamics of this protein, which is ubiquitously present in eubacteria. The perturbation of FtsZ assembly has been found to have a deleterious effect on the cytokinetic machinery and, in turn, upon cell survival. FtsZ is highly conserved among prokaryotes, offering the possibility of broad-spectrum antibacterial agents, while its limited sequence homology with tubulin (an essential protein in eukaryotic mitosis) offers the possibility of selective toxicity. This review aims to summarize current knowledge regarding the mechanism of action of FtsZ, and to highlight existing attempts toward the development of clinically useful inhibitors.

C1, a highly potent novel curcumin derivative, binds to tubulin, disrupts microtubule network and induces apoptosis

C1 is one of the most potent curcumin analogues identified till date which inhibits proliferation of various cancer cell lines. C1 binds to tubulin and depolymerized microtubules of MCF-7 cells. C1 altered the expression of apoptotic proteins and induces p53-dependent apoptosis.

We have synthesized a curcumin derivative, 4-{5-(4-hydroxy-3-methoxy-phenyl)-2-[3-(4-hydroxy-3-methoxy-phenyl)-acryloyl]-3-oxo-penta-1,4-dienyl}-piperidine-1-carboxylic acid tert-butyl ester (C1) that displays much stronger antiproliferative activity against various types of cancer cells including multidrug resistance cells than curcumin. C1 depolymerized both interphase and mitotic microtubules in MCF-7 cells and also inhibited the reassembly of microtubules in these cells. C1 inhibited the polymerization of purified tubulin, disrupted the lattice structure of microtubules and suppressed their GTPase activity in vitro. The compound bound to tubulin with a dissociation constant of 2.8±1 μM and perturbed the secondary structures of tubulin. Further, C1 treatment reduced the expression of Bcl2, increased the expression of Bax and down regulated the level of a key regulator of p53, murine double minute 2 (Mdm2) (S166), in MCF-7 cells. C1 appeared to induce p53 mediated apoptosis in MCF-7 cells. Interestingly, C1 showed more stability in aqueous buffer than curcumin. The results together showed that C1 perturbed microtubule network and inhibited cancer cells proliferation more efficiently than curcumin. The strong antiproliferative activity and improved stability of C1 indicated that the compound may have a potential as an anticancer agent.

Drug discovery targeting cell division proteins, microtubules and FtsZ

Eukaryotic cell division or cytokinesis has been a major target for anticancer drug discovery. After the huge success of paclitaxel and docetaxel, microtubule-stabilizing agents (MSAs) appear to have gained a premier status in the discovery of next-generation anticancer agents. However, the drug resistance caused by MDR, point mutations, and overexpression of tubulin subtypes, etc., is a serious issue associated with these agents. Accordingly, the discovery and development of new-generation MSAs that can obviate various drug resistances has a significant meaning. In sharp contrast, prokaryotic cell division has been largely unexploited for the discovery and development of antibacterial drugs. However, recent studies on the mechanism of bacterial cytokinesis revealed that the most abundant and highly conserved cell division protein, FtsZ, would be an excellent new target for the drug discovery of next-generation antibacterial agents that can circumvent drug-resistances to the commonly used drugs for tuberculosis, MRSA and other infections. This review describes an account of our research on these two fronts in drug discovery, targeting eukaryotic as well as prokaryotic cell division.

Glutamate 83 and arginine 85 of helix H3 bend are key residues for FtsZ polymerization, GTPase activity and cellular viability of Escherichia coli: lateral mutations affect FtsZ polymerization and E. coli viability

Background

FtsZ is an essential cell division protein, which localizes at the middle of the bacterial cell to mediate cytokinesis. In vitro, FtsZ polymerizes and induces GTPase activity through longitudinal interactions to form the protofilaments, whilst lateral interactions result within formation of bundles. The interactions that participate in the protofilaments are similar to its eukaryotic homologue tubulin and are well characterized; however, lateral interactions between the inter protofilaments are less defined. FtsZ forms double protofilaments in vitro, though the key elements on the interface of the inter-protofilaments remain unclear as well as the structures involved in the lateral interactions in vivo and in vitro. In this study, we demonstrate that the highly conserved negative charge of glutamate 83 and the positive charge of arginine 85 located in the helix H3 bend of FtsZ are required for in vitro FtsZ lateral and longitudinal interactions, respectively and for in vivo cell division.

Results

The effect of mutation on the widely conserved glutamate-83 and arginine-85 residues located in the helix H3 (present in most of the tubulin family) was evaluated by in vitro and in situ experiments. The morphology of the cells expressing Escherichia coli FtsZ (E83Q) mutant at 42°C formed filamented cells while those expressing FtsZ(R85Q) formed shorter filamented cells. In situ immunofluorescence experiments showed that the FtsZ(E83Q) mutant formed rings within the filamented cells whereas those formed by the FtsZ(R85Q) mutant were less defined. The expression of the mutant proteins diminished cell viability as follows: wild type > E83Q > R85Q. In vitro, both, R85Q and E83Q reduced the rate of FtsZ polymerization (WT > E83Q >> R85Q) and GTPase activity (WT > E83Q >> R85Q). R85Q protein polymerized into shorter filaments compared to WT and E83Q, with a GTPase lag period that was inversely proportional to the protein concentration. In the presence of ZipA, R85Q GTPase activity increased two fold, but no bundles were formed suggesting that lateral interactions were affected.

Conclusions

We found that glutamate 83 and arginine 85 located in the bend of helix H3 at the lateral face are required for the protofilament lateral interaction and also affects the inter-protofilament lateral interactions that ultimately play a role in the functional localization of the FtsZ ring at the cell division site.

Discovery of anti-TB agents that target the cell-division protein FtsZ

The emergence of multidrug-resistant Mycobacterium tuberculosis strains has made many of the currently available anti-tuberculosis (TB) drugs ineffective. Accordingly, there is a pressing need to identify new drug targets. Filamentous temperature-sensitive protein Z (FtsZ), a bacterial tubulin homologue, is an essential cell-division protein that polymerizes in a GTP-dependent manner, forming a highly dynamic cytokinetic ring, designated as the Z ring, at the septum site. Other cell-division proteins are recruited to the Z ring and, upon resolution of the septum, two daughter cells are produced. Since inactivation of FtsZ or alteration of FtsZ assembly results in the inhibition of Z-ring and septum formation, FtsZ is a very promising target for novel antimicrobial drug development. This review describes the function and dynamic behaviors of FtsZ and the recent development of FtsZ inhibitors as potential anti-TB agents.

Tumor shedding of laminin binding protein modulates angiostatin productionin vitro and interferes with plasmin-derived inhibition of angiogenesis in aortic ring cultures

The growth of solid tumors is largely controlled by the process of angiogenesis. A 67 kDa protein, the laminin binding protein (LBP), is shed from malignant cells in significant amounts and binds to laminin-1 (Starkey et al., Cytometry 1999;35:37-47; Karpatová et al., J Cell Biochem 1996;60:226-34). However, the functions of shed LBP are not fully understood. We hypothesize that matrix-bound LBP could modulate local tumor angiogenesis. In support of this hypothesis, we demonstrate that shed LBP exhibits sulfhydryl oxidase-like activities, and modifies the production of angiostatins from plasmin in vitro. The molecular weights of the autocatalytic products of lys-plasmin incubated with LBP in vitro suggest that PMDs (plasmin A chains attached to degraded B chains) (Ohyama et al., Eur J Biochem 2004;271:809-20) are preferentially generated. Using rat aortic ring assays, we also show that shed LBP reverses plasmin-dependent inhibition of vascular outgrowth. To elucidate which LBP region(s) are active in modulating angiogenesis, limited proteolysis experiments were conducted to determine stable rLBP domains likely to fold correctly, and these were cloned, expressed and purified. The stable LBP fragments were tested for binding to laminin-1 and for competition with shed LBP activity in the aortic ring assay. Results of these studies suggest that the active LBP domains lie within the 137-230 amino acid sequence, a region known to contain 2 bioactive sequences. Since this fragment binds to laminin-1 and modulates angiogenesis, it appears likely that binding of shed LBP to matrix laminin-1 is related to its functions in tumor angiogenesis. The findings presented in this manuscript suggest that LBP shedding could provide a useful therapeutic target.

Bacterial and archaeal flagella as prokaryotic motility organelles

The properties and molecular organization of flagella--the bacterial and archaeal motility organelles--are reviewed. The organization of these functional motility elements of prokaryotic organisms belonging to different kingdoms is compared. A mechanism for both in vivo and in vitro assembly of bacterial flagellum filaments (BFFs) is discussed, and similarity is supposed between flagellin and actin with regard to their polymeric forms (BFF and F-actin). Our own data on intracellular fixation of the Halobacterium salinarium flagellum are presented. Comparative characteristics of intracellular fixation of bacterial and archaeal flagella are also described.

Reversible unfolding of FtsZ cell division proteins from archaea and bacteria. Comparison with eukaryotic tubulin folding and assembly

The stability, refolding, and assembly properties of FtsZ cell division proteins from Methanococcus jannaschii and Escherichia coli have been investigated. Their guanidinium chloride unfolding has been studied by circular dichroism spectroscopy. FtsZ from E. coli and tubulin released the bound guanine nucleotide, coinciding with an initial unfolding stage at low denaturant concentrations, followed by unfolding of the apoprotein. FtsZ from M. jannaschii released its nucleotide without any detectable secondary structural change. It unfolded in an apparently two-state transition at larger denaturant concentrations. Isolated FtsZ polypeptide chains were capable of spontaneous refolding and GTP-dependent assembly. The homologous eukaryotic tubulin monomers misfold in solution, but fold within the cytosolic chaperonin CCT. Analysis of the extensive tubulin loop insertions in the FtsZ/tubulin common core and of the intermolecular contacts in model microtubules and tubulin-CCT complexes shows a loop insertion present at every element of lateral protofilament contact and at every contact of tubulin with CCT (except at loop T7). The polymers formed by purified FtsZ have a distinct limited protofilament association in comparison with microtubules. We propose that the loop insertions of tubulin and its CCT-assisted folding coevolved with the lateral association interfaces responsible for extended two-dimensional polymerization into microtubule polymers.

FtsQ, FtsL and FtsI require FtsK, but not FtsN, for co-localization with FtsZ during Escherichia coli cell division

During cell division in Gram-negative bacteria, the cell envelope invaginates and constricts at the septum, eventually severing the cell into two compartments, and separating the replicated genetic materials. In Escherichia coli, at least nine essential gene products participate directly in septum formation: FtsA, FtsI, FtsL, FtsK, FtsN, FtsQ, FtsW, FtsZ and ZipA. All nine proteins have been localized to the septal ring, an equatorial ring structure at the division site. We used translational fusions to green fluorescent protein (GFP) to demonstrate that FtsQ, FtsL and FtsI localize to potential division sites in filamentous cells depleted of FtsN, but not in those depleted of FtsK. We also constructed translational fusions of FtsZ, FtsA, FtsQ, FtsL and FtsI to enhanced cyan or yellow fluorescent protein (ECFP or EYFP respectively), GFP variants with different fluorescence spectra. Examination of cells expressing different combinations of the fusions indicated that FtsA, FtsQ, FtsL and FtsI co-localize with FtsZ in filaments depleted of FtsN. These localization results support the model that E. coli cell division proteins assemble sequentially as a multimeric complex at the division site: first FtsZ, then FtsA and ZipA independently of each other, followed successively by FtsK, FtsQ, FtsL, FtsW, FtsI and FtsN.

Activation of cell division protein FtsZ. Control of switch loop T3 conformation by the nucleotide gamma-phosphate

The effect of bound nucleotide on the conformation of cell division protein FtsZ from Methanococcus jannaschii has been investigated using molecular dynamics and site-directed mutagenesis. The molecular dynamics indicate that the gamma-phosphate of GTP induces a conformational perturbation in loop T3 (Gly88-Gly99 segment), in a position structurally equivalent to switch II of Ha-ras-p21. In the simulated GTP-bound state, loop T3 is pulled by the gamma-phosphate into a more compact conformation than with GDP, related to that observed in the homologous proteins alpha- and beta-tubulin. The existence of a nucleotide-induced structural change in loop T3 has been confirmed by mutating Thr92 into Trp (T92W-W319Y FtsZ). This tryptophan (12 A away from gamma-phosphate) shows large differences in fluorescence emission, depending on which nucleotide is bound to FtsZ monomers. Loop T3 is located at a side of the contact interface between two FtsZ monomers in the current model of FtsZ filament. Such a structural change may bend the GDP filament upon hydrolysis by pushing against helix H8 of next monomer, thus, generating force on the membrane during cell division. A related curvature mechanism may operate in tubulin activation.

Slow polymerization of Mycobacterium tuberculosis FtsZ

The essential cell division protein, FtsZ, from Mycobacterium tuberculosis has been expressed in Escherichia coli and purified. The recombinant protein has GTPase activity typical of tubulin and other FtsZs. FtsZ polymerization was studied using 90 degrees light scattering. The mycobacterial protein reaches maximum polymerization much more slowly ( approximately 10 min) than E. coli FtsZ. Depolymerization also occurs slowly, taking 1 h or longer under most conditions. Polymerization requires both Mg(2+) and GTP. The minimum concentration of FtsZ needed for polymerization is 3 microM. Electron microscopy shows that polymerized M. tuberculosis FtsZ consists of strands that associate to form ordered aggregates of parallel protofilaments. Ethyl 6-amino-2, 3-dihydro-4-phenyl-1H-pyrido[4,3-b][1,4]diazepin-8-ylcarbamate+ ++ (SRI 7614), an inhibitor of tubulin polymerization synthesized at Southern Research Institute, inhibits M. tuberculosis FtsZ polymerization, inhibits GTP hydrolysis, and reduces the number and sizes of FtsZ polymers.

Magnesium-induced linear self-association of the FtsZ bacterial cell division protein monomer. The primary steps for FtsZ assembly

The bacterial cell division protein FtsZ from Escherichia coli has been purified with a new calcium precipitation method. The protein contains one GDP and one Mg(2+) bound, it shows GTPase activity, and requires GTP and Mg(2+) to polymerize into long thin filaments at pH 6.5. FtsZ, with moderate ionic strength and low Mg(2+) concentrations, at pH 7.5, is a compact and globular monomer. Mg(2+) induces FtsZ self-association into oligomers, which has been studied by sedimentation equilibrium over a wide range of Mg(2+) and FtsZ concentrations. The oligomer formation mechanism is best described as an indefinite self-association, with binding of an additional Mg(2+) for each FtsZ monomer added to the growing oligomer, and a slight gradual decrease of the affinity of addition of a protomer with increasing oligomer size. The sedimentation velocity of FtsZ oligomer populations is compatible with a linear single-stranded arrangement of FtsZ monomers and a spacing of 4 nm. It is proposed that these FtsZ oligomers and the polymers formed under assembly conditions share a similar axial interaction between monomers (like in the case of tubulin, the eukaryotic homolog of FtsZ). Similar mechanisms may apply to FtsZ assembly in vivo, but additional factors, such as macromolecular crowding, nucleoid occlusion, or specific interactions with other cellular components active in septation have to be invoked to explain FtsZ assembly into a division ring.

Bacterial cell division

Formation of the bacterial division septum is catalyzed by a number of essential proteins that assemble into a ring structure at the future division site. Assembly of proteins into the cytokinetic ring appears to occur in a hierarchial order that is initiated by the FtsZ protein, a structural and functional analog of eukaryotic tubulins. Placement of the division site at its correct location in Escherichia coli requires a division inhibitor (MinC), that is responsible for preventing septation at unwanted sites near the cell poles, and a topological specificity protein (MinE), that forms a ring at midcell and protects the midcell site from the division inhibitor. However, the mechanism responsible for identifying the position of the midcell site or the polar sites used for spore septum formation is still unclear. Regulation of the division process and its coordination with other cell cycle events, such as chromosome replication, are poorly understood. However, a protein has been identified in Caulobacter (CtrA) that regulates both the initiation of chromosome regulation and the transcription of ftsZ, and that may play an important role in the coordination process.

Tubulin-like protofilaments in Ca2+-induced FtsZ sheets

The 40 kDa protein FtsZ is a major septum-forming component of bacterial cell division. Early during cytokinesis at midcell, FtsZ forms a cytokinetic ring that constricts as septation progresses. FtsZ has a high propensity to polymerize in vitro into various structures, including sheets and filaments, in a GTP-dependent manner. Together with limited sequence homology, the occurrence of the tubulin signature motif in FtsZ and a similar three-dimensional structure, this leads to the conclusion that FtsZ is the bacterial tubulin homologue. We have polymerized FtsZ1 from Methanococcus jannaschii in the presence of millimolar concentrations of Ca2+ ions to produce two-dimensional crystals of plane group P2221. Most of the protein precipitates and forms filaments approximately 23.0 nm in diameter. A three-dimensional reconstruction of tilted micrographs of FtsZ sheets in negative stain between 0 and 60 degrees shows protofilaments of FtsZ running along the sheet axis. Pairs of parallel FtsZ protofilaments associate in an antiparallel fashion to form a two-dimensional sheet. The antiparallel arrangement is believed to generate flat sheets instead of the curved filaments seen in other FtsZ polymers. Together with the subunit spacing along the protofilament axis, a fitting of the FtsZ crystal structure into the reconstruction suggests a protofilamant structure very similar to that of tubulin protofilaments.

Helicity of alpha(404-451) and beta(394-445) tubulin C-terminal recombinant peptides

We have investigated the solution conformation of the functionally relevant C-terminal extremes of alpha- and beta-tubulin, employing the model recombinant peptides RL52alpha3 and RL33beta6, which correspond to the amino acid sequences 404-451(end) and 394-445(end) of the main vertebrate isotypes of alpha- and beta-tubulin, respectively, and synthetic peptides with the alpha-tubulin(430-443) and beta-tubulin(412-431) internal sequences. Alpha(404-451) and beta(394-445) are monomeric in neutral aqueous solution (as indicated by sedimentation equilibrium), and have circular dichroism (CD) spectra characteristic of nearly disordered conformation, consistent with low scores in peptide helicity prediction. Limited proteolysis of beta(394-445) with subtilisin, instead of giving extensive degradation, resulted in main cleavages at positions Thr409-Glu410 and Tyr422-Gln423-Gln424, defining the proteolysis resistant segment 410-422, which corresponds to the central part of the predicted beta-tubulin C-terminal helix. Both recombinant peptides inhibited microtubule assembly, probably due to sequestration of the microtubule stabilizing associated proteins. Trifluoroethanol (TFE)-induced markedly helical CD spectra in alpha(404-451) and beta(394-445). A substantial part of the helicity of beta(394-445) was found to be in the CD spectrum of the shorter peptide beta(412-431) with TFE. Two-dimensional 1H-NMR parameters (nonsequential nuclear Overhauser effects (NOE) and conformational C alphaH shifts) in 30% TFE permitted to conclude that about 25% of alpha(404-451) and 40% of beta(394-451) form well-defined helices encompassing residues 418-432 and 408-431, respectively, flanked by disordered N- and C-segments. The side chains of beta(394-451) residues Leu418, Val419, Ser420, Tyr422, Tyr425, and Gln426 are well defined in structure calculations from the NOE distance constraints. The apolar faces of the helix in both alpha and beta chains share a characteristic sequence of conserved residues Ala,Met(+4),Leu(+7),Tyr(+11). The helical segment of alpha(404-451) is the same as that described in the electron crystallographic model structure of alphabeta-tubulin, while in beta(394-451) it extends for nine residues more, supporting the possibility of a functional coil --> helix transition at the C-terminus of beta-tubulin. These peptides may be employed to construct model complexes with microtubule associated protein binding sites.

Crystal structure determination of FtsZ from Methanococcus jannaschii

FtsZ is the polymer-forming protein of bacterial cell division. It is part of a ring in the middle of the dividing cell that is required for constriction of cell membrane and cell envelope to yield two daughter cells. FtsZ is a GTPase and is the only bacterial protein showing significant sequence homology to the eukaryotic tubulins. FtsZ can polymerize into tubes, sheets, and rings in vitro and is ubiquitous in eubacteria and archaea. Full-length FtsZ1 from Methanococcus jannaschii has been over expressed in Escherichia coli, employing the hyperthermophilic properties of the protein. Crystals grown from PEG400 and ethanol belong to spacegroup I213 with a = b = c = 159.1 A. Isomorphous replacement using one Hg derivative yielded a interpretable electron density map at 4 A resolution. The structure for residues 23-356 and one GDP has been refined to an Rfree of 0.28 (Rf = 0.20) at 2.8 A resolution. FtsZ consists of two domains with a connecting core helix. The N-terminal domain and the core helix contain all residues involved in nucleotide binding and resemble the fold of dinucleotide-binding proteins. The structures of tubulin and FtsZ show striking similarity; together with the functional similarities, this provides a strong indication that FtsZ is a true homolog of tubulin.

Plastid division: evidence for a prokaryotically derived mechanism

Plastid division is a critical process in plant cell biology but it is poorly understood. Recent studies combining mutant analysis, gene cloning, and exploitation of genomic resources have revealed that the molecular machinery associated with plastid division is derived evolutionarily from the bacterial cell division apparatus. Comparison of the two processes provides a basis for identifying new components of the plastid division mechanism, but also serves to highlight the differences, not least of which is the nuclear control of the plastid division process.

Structural features of the plasmid pMV158-encoded transcriptional repressor CopG, a protein sharing similarities with both helix-turn-helix and beta-sheet DNA binding proteins

The small transcriptional repressor CopG protein (45 amino acids) encoded by the streptococcal plasmid pMV158 was purified to near homogeneity. Gel filtration chromatography and analytical ultracentrifugation showed that the native protein is a spherical dimer of identical subunits. Circular dichroism measurements of CopG indicated a consensus average content of more than 50% alpha-helix and 10-35% beta-strand and turns, which is compatible with the predicted secondary structure of the protein. CopG exhibited a prolonged intracellular half-life, but deletions in regions other than the C-terminal affected the global structure of the protein, severely reducing the half-lives of the CopG variants. This indicates that CopG has a compact structure, perhaps constituted by a single domain. Molecular modeling of CopG showed a good fitting between the helix-turn-helix motifs of well-known repressor proteins and a bihelical unit of CopG. However, modeling of CopG with ribbon-helix-helix class of DNA binding proteins also exhibited an excellent fit. Eleven out of the 12 replicons belonging to the pMV158 plasmid family could also encode Cop proteins, which share features with both helix-turn-helix and beta-sheet DNA binding proteins.

Tubulin and FtsZ form a distinct family of GTPases

Tubulin and FtsZ share a common fold of two domains connected by a central helix. Structure-based sequence alignment shows that common residues localize in the nucleotide-binding site and a region that interacts with the nucleotide of the next tubulin subunit in the protofilament, suggesting that tubulin and FtsZ use similar contacts to form filaments. Surfaces that would make lateral interactions between protofilaments or interact with motor proteins are, however, different. The highly conserved nucleotide-binding sites of tubulin and FtsZ clearly differ from those of EF-Tu and other GTPases, while resembling the nucleotide site of glyceraldehyde-3-phosphate dehydrogenase. Thus, tubulin and FtsZ form a distinct family of GTP-hydrolyzing proteins.

Inhibition of assembly of bacterial cell division protein FtsZ by the hydrophobic dye 5,5'-bis-(8-anilino-1-naphthalenesulfonate)

To gain further insight into the structural relatedness of tubulin and FtsZ, the tubulin-like prokaryotic cell division protein, we tested the effect of tubulin assembly inhibitors on FtsZ assembly. Common tubulin inhibitors, such as colchicine, colcemid, benomyl, and vinblastine, had no effect on Ca2+-promoted GTP-dependent assembly of FtsZ into polymers. However, the hydrophobic probe 5, 5'-bis-(8-anilino-1-naphthalenesulfonate) (bis-ANS) inhibited FtsZ assembly. The potential mechanisms for inhibition are discussed. Titrations of FtsZ with bis-ANS indicated that FtsZ has one high affinity binding site and multiple low affinity binding sites. ANS (8-anilino-1-naphthalenesulfonate), a hydrophobic probe similar to bis-ANS, had no inhibitory effect on FtsZ assembly. Because tubulin assembly has also been shown to be inhibited by bis-ANS but not by ANS, it supports the idea that FtsZ and tubulin share similar conformational properties. Ca2+, which promotes GTP-dependent FtsZ assembly, stimulated binding of bis-ANS or ANS to FtsZ, suggesting that Ca2+ binding induces changes in the hydrophobic conformation of the protein. Interestingly, depletion of bound Ca2+ with EGTA further enhanced bis-ANS fluorescence. These findings suggest that both binding and dissociation of Ca2+ are capable of inducing FtsZ conformational changes, and these changes could promote the GTP-dependent assembly of FtsZ.

Bacterial cell division

Bacteria usually divide by building a central septum across the middle of the cell. This review focuses on recent results indicating that the tubulin-like FtsZ protein plays a central role in cytokinesis as a major component of a contractile cytoskeleton. Assembly of this cytoskeletal element abutting the membrane is a key point for regulation. The characterization of FtsZ homologues in Mycoplasmas, Archaea, and chloroplasts implies that the constriction mechanism is conserved and that FtsZ can constrict in the absence of peptidoglycan synthesis. In most Eubacteria, the internal cytoskeleton must also regulate synthesis of septal peptidoglycan. The Escherichia coli septum-specific penicillin-binding protein 3 (PBP3) forms a complex with other enzymes involved in murein metabolism, suggesting a centrally located transmembrane complex capable of splicing multiple new strands of peptidoglycan into the cell wall. Important questions remain about the spatial and temporal control of bacterial division.

Crystal structure of the bacterial cell-division protein FtsZ

Bacterial cell division ends with septation, the constriction of the cell wall and cell membranes that leads to the formation of two daughter cells. During septation, FtsZ, a protein of relative molecular mass 40,000 which is ubiquitous in eubacteria and is also found in archaea and chloroplasts, localizes early at the division site to form a ring-shaped septum. This septum is required for the mechanochemical process of membrane constriction. FtsZ is a GTPase with weak sequence homology to tubulins. The nature of FtsZ polymers in vivo is unknown, but FtsZ can form tubules, sheets and minirings in vitro. Here we report the crystal structure at 2.8 A resolution of recombinant FtsZ from the hyperthermophilic methanogen Methanococcus jannaschii. FtsZ has two domains, one of which is a GTPase domain with a fold related to one found in the proteins p21ras and elongation factor EF-Tu. The carboxy-terminal domain, whose function is unknown, is a four-stranded beta-sheet tilted by 90 degrees against the beta-sheet of the GTPase domain. The two domains are arranged around a central helix. GDP binding is different from that typically found in GTPases and involves four phosphate-binding loops and a sugar-binding loop in the first domain, with guanine being recognized by residues in the central connecting helix. The three-dimensional structure of FtsZ is similar to the structure of alpha- and beta-tubulin.

Control of the structural stability of the tubulin dimer by one high affinity bound magnesium ion at nucleotide N-site

Tubulin liganded with GTP at the N-site in the alpha-subunit and with GDP at the E-site in the beta-subunit (GDP-tubulin) reversibly binds one high affinity Mg2+ cation (Kb = 1.1 x 10(7) M-1), whereas tubulin liganded with GTP at both subunits (GTP-tubulin) binds one more high affinity Mg2+. The two cation binding loci are identified as nucleotide sites N and E, respectively. Mg2+ at the N-site controls the stability and structure of the alphabeta-tubulin dimer. Mg2+ dissociation is followed by the slow release of bound nucleotide and functional inactivation. Mg2+ bound to the N-site significantly increases the thermal stability of the GDP-tubulin dimer (by 10 degrees C and approximately 50 kcal mol-1 of experimental enthalpy change). However, the thermal stability of Mg2+-liganded GDP- and GTP-tubulin is the same. Mg2+ binding to the N-site is linked to the alphabeta-dimer formation. The binding of Mg2+ to the alpha-subunit communicates a marked enhancement of fluorescence to a colchicine analogue bound to the beta-subunit. Colchicine, in turn, thermally stabilizes Mg2+-depleted tubulin. The tubulin properties described would be simply explained if the N-site and the colchicine site are at the alpha-beta dimerization interface. It follows that the E-site would be at the beta-end of the tubulin dimer, consistent with the known functional role of the E nucleotide gamma-phosphate and coordinated cation controlling microtubule stability.

Multiple forms of tubulin: different gene products and covalent modifications

Tubulin, the subunit protein of microtubules, is an alpha/beta heterodimer. In many organisms, both alpha and beta exist in numerous isotypic forms encoded by different genes. In addition, both alpha and beta undergo a variety of posttranslational covalent modifications, including acetylation, phosphorylation, detyrosylation, polyglutamylation, and polyglycylation. In this review the distribution and possible functional significance of the various forms of tubulin are discussed. In analyzing the differences among tubulin isotypes encoded by different genes, some appear to have no functional significance, some increase the overall adaptability of the organism to environmental challenges, and some appear to perform specific functions including formation of particular organelles and interactions with specific proteins. Purified isotypes also display different properties in vitro. Although the significance of all the covalent modification of tubulin is not fully understood, some of them may influence the stability of modified microtubules in vivo as well as interactions with certain proteins and may help to determine the functional role of microtubules in the cell. The review also discusses isotypes of gamma-tubulin and puts various forms of tubulin in an evolutionary context.

Ca2+-mediated GTP-dependent dynamic assembly of bacterial cell division protein FtsZ into asters and polymer networks in vitro

FtsZ, a tubulin-like GTPase that forms a dynamic ring marking the division plane of prokaryotic cells, is essential for cytokinesis. It is not known what triggers FtsZ ring assembly. In this work, we use a FtsZ-green fluorescent protein (Gfp) chimera to assay FtsZ assembly over time by using fluorescence microscopy. We show that FtsZ polymers can assemble dynamically in solution in a GTP-dependent manner. Initially, FtsZ nucleation centers grow into aster-like structures that dramatically resemble microtubule organizing centers. As assembly proceeds further, protofilament bundles emanating from different asters interconnect, mimicking the closure of the FtsZ ring in vivo. Surprisingly, millimolar levels of Ca2+ promote FtsZ dynamic assembly. FtsZ can undergo repeated GTP-dependent assembly and disassembly in solution by sequential addition and removal of Ca2+. In addition, GTP binding and hydrolysis by FtsZ are regulated by Ca2+ concentration. Although the concentration of Ca2+ required for FtsZ assembly in vitro is high, its clear and specific effect on FtsZ dynamics suggests the possibility that Ca2+ may have a role in regulating FtsZ ring assembly in the cell.

Visualizing the secondary structure of tubulin: three-dimensional map at 4 A

We are in the process of determining the structure of tubulin using electron crystallography of zinc-induced, crystalline sheets. We have now extended the resolution to 4 A, and there are many features in the map that appear to show details of the secondary structure. X-ray crystallographers are well aware of the problems of interpreting maps with such limited resolution, and the additional problem of the missing cone of data inherent in electron crystallography may make interpretation even more difficult. To investigate how reliably these maps can be interpreted, we have calculated density maps of a known structure, actin, under conditions similar to those of the tubulin map. Results of these simulations support the limited interpretations we made previously in the 6.5-A maps and the more extensive interpretations we make here in the 4-A map. Most of the secondary structure of the tubulin dimer can now be identified.