An assessment of the effects of shell cross-linked nanoparticle size, core composition, and surface PEGylation on in vivo biodistribution

Lyophilization of Nanoparticles, Does It Really Work? Overview of the Current Status and Challenges

Nanoparticles are being increasingly used as drug delivery systems to enhance the delivery to and uptake by target cells and to reduce off-target toxicity of free drugs. However, although the advantages of nanoparticles as drug carriers are clear, there are still some limitations, especially in maintaining their long-term stability. Lyophilization, also known as freeze-drying, has been heavily investigated as a solution to this problem. This strategy has been shown to be effective in increasing both the long-term stability of nanoparticles and the shelf life of the drug product. However, the process is still in need of improvement in several aspects, such as the process parameters, formulation factors, and characterization techniques. This review summarizes the advantages and limitations of nanoparticles for the treatment of disease, advantages and limitations, and the status of the lyophilization of nanoparticles for therapeutic use and provides insight into both the advantages and the limitations.

Size-Dependent Polymeric Nanoparticle Distribution in a Static versus Dynamic Microfluidic Blood Vessel Model: Implications for Nanoparticle-Based Drug Delivery

Nanoparticles (NPs) have been widely investigated in the nanomedicine field. One of the main challenges is to accurately predict the NP distribution and fate after administration. Microfluidic platforms acquired huge importance as tools to model the in vivo environment. In this study, we leveraged a microfluidic platform to produce FITC-labeled poly(lactide-co-glycolide)-block-poly(ethylene glycol) (PLGA-PEG) NPs with defined sizes of 30, 50, and 70 nm. The study aimed to compare the ability of NPs with differences of 20 nm in size to cross an endothelial barrier using static (Transwell inserts) and dynamic (microfluidic perfusion device) in vitro models. Our results evidence a size-dependent NP crossing in both models (30 > 50 > 70 nm) and highlight the bias deriving from the static model, which does not involve shear stresses. The permeation of each NP size was significantly higher in the static system than in the dynamic model at the earliest stages. However, it gradually decreased to levels comparable with those of the dynamic model. Overall, this work highlights clear differences in NP distribution over time in static versus dynamic conditions and distinct size-dependent patterns. These findings reinforce the need for accurate in vitro screening models that allow for more accurate predictions of in vivo performance.

Recent advancements in design of nucleic acid nanocarriers for controlled drug delivery

Research of nanoscale nucleic acid carriers has garnered attention in recent years due to their distinctive and controllable properties. However, current knowledge is limited in how we can efficiently utilize these systems for clinical applications. Several researchers have pioneered new and innovative nanocarrier drug delivery systems, but understanding physiochemical properties and behavior in vivo is vital to implementing them as clinical drug delivery platforms. In this review, we outline the most significant innovations in the synthesis, physical properties, and utilization of nucleic acid nanocarriers in the past 5 years, addressing the crucial properties which improve nanocarrier characteristics, delivery, and drug release. The challenges of controlling the transport of nucleic acid nanocarriers and therapeutic release for biological applications are outlined. Barriers which inhibit effective transport into tissue are discussed with emphasis on the modifications needed to overcome such obstacles. The novel strategies discussed in this work summarize the pivotal features of modern nucleic nanocarriers and postulate where future developments could revolutionize the translation of these tools into a clinical setting.

Proteomes of Micro- and Nanosized Carriers Engineered from Red Blood Cells

Red blood cell (RBC)-derived systems offer a potential platform for delivery of biomedical cargos. Although the importance of specific proteins associated with the biodistribution and pharmacokinetics of these particles has been recognized, it remains to be explored whether some of the key transmembrane and cytoskeletal proteins responsible for immune-modulatory effects and mechanical integrity of the particles are retained. Herein, using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and quantitative tandem mass tag mass spectrometry in conjunction with bioinformatics analysis, we have examined the proteomes of micro- and nanosized erythrocyte ghosts doped with indocyanine green and compared them with those of RBCs. We identified a total of 884 proteins in each set of RBCs, micro-, and nanosized particles, of which 8 and 45 proteins were expressed at significantly different relative abundances when comparing micro-sized particles vs RBCs and nanosized particles vs RBCs, respectively. We found greater differences in relative abundances of some mechano-modulatory proteins, such as band 3 and protein 4.2, and immunomodulatory proteins like CD44, CD47, and CD55 in nanosized particles as compared to RBCs. Our findings highlight that the methods utilized in fabricating RBC-based systems can induce substantial effects on their proteomes. Mass spectrometry data are available at ProteomeXchange with the identifier PXD038780.

Exploring the impact of PEGylation on the cell-nanomicelle interactions by AFM-based single-molecule force spectroscopy and force tracing

PEGylation has been considered the gold standard method for the modification of various drug delivery systems since the last century. However, the impact of PEGylation on the dynamic interaction between drug carriers and cell membranes has not been quantitatively clarified. Herein, the cellular binding and receptor-mediated endocytosis of a model PEGylated polypeptide nanomicelle were systematically investigated at the single-particle level using AFM-based single-molecule force spectroscopy (SMFS) and force tracing. A self-assembled elastin-like polypeptide (ELP) nanomicelle, which is capable of cross-linking, gastrin-releasing peptide (GRP) modification, and PEGylation was prepared. The cross-linked ELP-based nanomicelles exhibited outstanding stability in a broad temperature range of 4-40 °C, which facilitate the drug loading, as well as our cell-nanomicelle study at the single particle level. The unbinding force between the cross-linked ELP-based nanomicelles and the GRP receptor (GRPR)-containing cell (PC-3) membranes was quantitatively measured by AFM-SMFS. It is found that the PEGylated GRP-displaying nanomicelles exhibit the highest unbinding force, indicating the enhanced specific binding effect of PEGylation. Furthermore, the receptor-mediated endocytosis of the cross-linked ELP-based nanomicelles was monitored with the help of force tracing based on AFM-SMFS. Our results show that PEGylation decreases the endocytic force, duration, and engulfment depth of the PEGylated GRP-displaying nanomicelles, but increases their endocytic velocity, which results from the elimination of non-specific interactions during endocytosis. These observations demonstrate the diverse and complex roles of PEGylation on the interaction of polypeptide nanomicelles to cell membranes and may shed light on the rational design of organic polymer-based drug delivery systems aiming for active and passive targeting strategies. STATEMENT OF SIGNIFICANCE: A self-assembled elastin-like polypeptide (ELP) nanomicelle, which can be easily cross-linked, gastrin-releasing peptide (GRP) modified, and PEGylated, is designed. The AFM-SMFS experiment shows that PEGylation can enhance specific binding of the nanomicelles to the receptors on cell membranes. The force tracing experiment indicates that PEGylation decreases the endocytic force as well as engulfment depth of the nanomicelles through the elimination of non-specific interactions. PEGylation can benefit the drug delivery systems aiming at active targeting, while might not be an ideal modification for drug carriers designed for passive targeting, whose cellular uptake mainly depends on non-specific interactions.

Assessing the In Vivo Biocompatibility of Molecularly Imprinted Polymer Nanoparticles

Molecularly imprinted polymer nanoparticles (nanoMIPs) are high affinity synthetic receptors which show promise as imaging and therapeutic agents. Comprehensive analysis of the in vivo behaviour of nanoMIPs must be performed before they can be considered for clinical applications. This work reports the solid-phase synthesis of nanoMIPs and an investigation of their biodistribution, clearance and cytotoxicity in a rat model following both intravenous and oral administration. These nanoMIPs were found in each harvested tissue type, including brain tissue, implying their ability to cross the blood-brain barrier. The nanoMIPs were cleared from the body via both faeces and urine. Furthermore, we describe an immunogenicity study in mice, demonstrating that nanoMIPs specific for a cell surface protein showed moderate adjuvant properties, whilst those imprinted for a scrambled peptide showed no such behaviour. Given their ability to access all tissue types and their relatively low cytotoxicity, these results pave the way for in vivo applications of nanoMIPs.

Mediating bio-fate of polymeric cholecalciferol nanoparticles through rational size control

Whilst 10-200 nm polymeric nanoparticles hold enormous medical potential, successful clinical translation remains scarce. There is an inadequate understanding of how these nanoparticles could be fabricated with consistent particle architecture in this size range, as well as their corresponding biological performance. We seek to fill this important knowledge gap by employing Design of Experiment (DoE) to examine critical formulation and processing parameters of cholecalciferol (VitD3)-loaded nanoparticles by flash nanoprecipitation (FNP). Based on the regression analysis of the critical processing parameters, six VitD3 nanoparticle formulations with z-average particle sizes between 40 and 150 nm were successfully developed, possessing essentially the same particle shape and zeta potential. To evaluate the effect of particle size on the in vivo performance, not only VitD3 but also its active metabolites (25-hydroxyvitamin D3 and 1,25-dihydroxyvitamin D3) were assayed in the biodistribution study. Results indicated that VitD3 nanoparticles with sizes ≤110 nm would achieve higher plasma retention. VitD3 nanoparticles with sizes of 40 nm and 150 nm were superior for lung deposition, while particle size had no major role in the brain uptake of VitD3 nanoparticles. The present study demonstrates the value of DoE for generating size-tunable nanoparticles with controlled particle properties in FNP and offers important insights into the particle size effect of nanoparticles <200 nm on their therapeutic potential.

Poly(trehalose methacrylate) as an Excipient for Insulin Stabilization: Mechanism and Safety

Insulin, the oldest U.S. Food and Drug Administration (FDA)-approved recombinant protein and a World Health Organization (WHO) essential medicine for treating diabetes globally, faces challenges due to its storage instability. One approach to stabilize insulin is the addition of poly(trehalose methacrylate) (pTrMA) as an excipient. The polymer increases the stability of the peptide to heat and mechanical agitation and has a low viscosity suitable for injection and pumps. However, the safety and stabilizing mechanism of pTrMA is not yet known and is required to understand the potential suitability of pTrMA as an insulin excipient. Herein is reported the immune response, biodistribution, and insulin plasma lifetime in mice, as well as investigation into insulin stabilization. pTrMA alone or formulated with ovalbumin did not elicit an antibody response over 3 weeks in mice, and there was no observable cytokine production in response to pTrMA. Micropositron emission tomography/microcomputer tomography of 64Cu-labeled pTrMA showed excretion of 78-79% ID/cc within 24 h and minimal liver accumulation at 6-8% ID/cc when studied out to 120 h. Further, the plasma lifetime of insulin in mice was not altered by added pTrMA. Formulating insulin with 2 mol equiv of pTrMA improved the stability of insulin to standard storage conditions: 46 weeks at 4 °C yielded 87.0% intact insulin with pTrMA present as compared to 7.8% intact insulin without the polymer. The mechanism by which pTrMA-stabilized insulin was revealed to be a combination of inhibiting deamidation of amino acid residues and preventing fibrillation, followed by aggregation of inactive and immunogenic amyloids all without complexing insulin into its hexameric state, which could delay the onset of insulin activity. Based on the data reported here, we suggest that pTrMA stabilizes insulin as an excipient without adverse effects in vivo and is promising to investigate further for the safe formulation of insulin.

One step closer to cancer nanomedicine

High-throughput tool uncovers links between cell signaling and nanomaterial uptake.

Fluorophore Localization Determines the Results of Biodistribution of Core-Shell Nanocarriers

Introduction

Methods

Results

Conclusion

Intravenous Delivery of Lung-Targeted Nanofibers for Pulmonary Hypertension in Mice

Pulmonary hypertension is a highly morbid disease with no cure. Available treatments are limited by systemic adverse effects due to non-specific biodistribution. Self-assembled peptide amphiphile (PA) nanofibers are biocompatible nanomaterials that can be modified to recognize specific biological markers to provide targeted drug delivery and reduce off-target toxicity. Here, PA nanofibers that target the angiotensin I-converting enzyme and the receptor for advanced glycation end-products (RAGE) are developed, as both proteins are overexpressed in the lung with pulmonary hypertension. It is demonstrated that intravenous delivery of RAGE-targeted nanofibers containing the targeting epitope LVFFAED (LVFF) significantly accumulated within the lung in a chronic hypoxia-induced pulmonary hypertension mouse model. Using 3D light sheet fluorescence microscopy, it is shown that LVFF nanofiber localization is specific to the diseased pulmonary tissue with immunofluorescence analysis demonstrating colocalization of the targeted nanofiber to RAGE in the hypoxic lung. Furthermore, biodistribution studies show that significantly more LVFF nanofibers localized to the lung compared to major off-target organs. Targeted nanofibers are retained within the pulmonary tissue for 24 h after injection. Collectively, these data demonstrate the potential of a RAGE-targeted nanomaterial as a drug delivery platform to treat pulmonary hypertension.

RAFT polymerization mediated core-shell supramolecular assembly of PEGMA-co-stearic acid block co-polymer for efficient anticancer drug delivery

In this work, core-shell supramolecular assembly polymeric nano-architectures containing hydrophilic and hydrophobic segments were synthesized via reversible addition fragmentation chain transfer (RAFT) polymerization. Herein, polyethylene glycol methyl ether methacrylate (PEGMA), and stearic acid were used to synthesize the poly(PEGMA) homopolymer and stearyl ethyl methacrylate (SEMA), respectively. Then, PEGMA and SEMA were polymerized through controlled RAFT polymerization to obtain the final diblock copolymer, poly(PEGMA-co-SEMA) (BCP). Model anticancer drug, doxorubicin (DOX) was loaded on BCPs. Interestingly, efficient DOX release was observed at acidic pH, similar to the cancerous environment pH level. Significant cellular uptake of DOX loaded BCP50 (BCP50-DOX) was observed in MDA-MB-231 triple negative breast cancer cells and resulted in a 35 fold increase in anticancer activity against MDA MB-231 cells compared to free DOX. Scanning electron microscopy (SEM) imaging confirmed the apoptosis mediated cellular death. These core-shell supramolecular assembly polymeric nano-architectures may be an efficient anti-cancer drug delivery system in the future.

Nanomedicines for Subcellular Targeting: The Mitochondrial Perspective

BACKGROUND

Over the past decade, there has been a surge in the number of mitochondrialactive therapeutics for conditions ranging from cancer to aging. Subcellular targeting interventions can modulate adverse intracellular processes unique to the compartments within the cell. However, there is a dearth of reviews focusing on mitochondrial nano-delivery, and this review seeks to fill this gap with regards to nanotherapeutics of the mitochondria.

METHODS

Besides its potential for a higher therapeutic index than targeting at the tissue and cell levels, subcellular targeting takes into account the limitations of systemic drug administration and significantly improves pharmacokinetics. Hence, an extensive literature review was undertaken and salient information was compiled in this review.

RESULTS

From literature, it was evident that nanoparticles with their tunable physicochemical properties have shown potential for efficient therapeutic delivery, with several nanomedicines already approved by the FDA and others in clinical trials. However, strategies for the development of nanomedicines for subcellular targeting are still emerging, with an increased understanding of dysfunctional molecular processes advancing the development of treatment modules. For optimal delivery, the design of an ideal carrier for subcellular delivery must consider the features of the diseased microenvironment. The functional and structural features of the mitochondria in the diseased state are highlighted and potential nano-delivery interventions for treatment and diagnosis are discussed.

CONCLUSION

This review provides an insight into recent advances in subcellular targeting, with a focus on en route barriers to subcellular targeting. The impact of mitochondrial dysfunction in the aetiology of certain diseases is highlighted, and potential therapeutic sites are identified.

Recent progress on nanoparticles for targeted aneurysm treatment and imaging

An abdominal aortic aneurysm (AAA) is a localized dilatation of the aorta that plagues millions. Its rupture incurs high mortality rates (~80-90%), pressing an urgent need for therapeutic methods to prevent this deadly outcome. Judiciously designed nanoparticles (NPs) have displayed a unique potential to fulfill this need. Aneurysms feature excessive inflammation and extracellular matrix (ECM) degradation. As such, typically inflammatory cells and exposed ECM proteins have been targeted with NPs for therapeutic, diagnostic, or theranostic purposes in experimental models. NPs have been used not only for encapsulation and delivery of drugs and biomolecules in preclinical tests, but also for enhanced imaging to monitor aneurysm progression in patients. Moreover, they can be readily modified with various molecules to improve lesion targeting, detectability, biocompatibility, and circulation time. This review updates on the progress, limitations, and prospects of NP applications in the context of AAA.

Molecularly Imprinted Polymers for Cell Recognition

Since their conception 50 years ago, molecularly imprinted polymers (MIPs) have seen extensive development both in terms of synthetic routes and applications. Cells are perhaps the most challenging target for molecular imprinting. Although early work was based almost entirely around microprinting methods, recent developments have shifted towards epitope imprinting to generate MIP nanoparticles (NPs). Simultaneously, the development of techniques such as solid phase MIP synthesis has solved many historic issues of MIP production. This review briefly describes various approaches used in cell imprinting with a focus on applications of the created materials in imaging, drug delivery, diagnostics, and tissue engineering.

Insights into Active Targeting of Nanoparticles in Drug Delivery: Advances in Clinical Studies and Design Considerations for Cancer Nanomedicine

Nanomedicine is a promising strategy for improving clinical outcomes for cancer therapies, by improving drug efficacy through enhanced delivery to disease sites. It is of importance for ultimate clinical success to consider the contributing factors to achieving this goal, such as size, chemistry, and functionality of nanoparticle delivery systems, and how these parameters influence tumor localization and uptake. This Topical Review will first discuss the evolution and progress of nanoparticles for cancer drug delivery and the current challenges that remain to be addressed. Strategies for overcoming the limitations of passive targeting through active targeting approaches, and the current state of such nanomedicines in the clinic will be highlighted. Finally, novel approaches toward the design of active targeted nanoparticles building on our growing understanding of nanobio interactions are considered, in order to shed light on future design considerations for accelerating clinical translation of nanomedicines.

Effect of physicochemical and surface properties on in vivo fate of drug nanocarriers

Over the years, a plethora of materials - natural and synthetic - have been engineered at a nanoscopic level and explored for drug delivery. Nanocarriers based on such materials could improve the payload's pharmacokinetics and achieve the desired pharmacological response at the target tissue. Despite the development of rationally designed drug nanocarriers, only a handful of such formulations have been successfully translated into the clinic. The physicochemical properties (size, shape, surface chemistry, porosity, elasticity, and many others) of these nanocarriers influence its biological identity, which in presence of biological barriers in vivo, could significantly modulate the therapeutic index of its cargo and alter the desired outcome. Further, complexities associated with developing effective drug nanocarriers have led to conflicting views of its safety, permeation of biological barriers and cellular uptake. Here, in this review, we emphasize the effect of physicochemical properties of nanocarriers on their interactions with the biological milieu. The review will discuss in depth, how modulating the physicochemical properties would influence a drug nanocarrier's behavior in vivo and the mechanisms underlying these effects. The goal of this review is to summarize the design considerations based on these properties and to provide a conceptual template for achieving improved therapeutic efficacy with enhanced patient compliance.

Magnetometry based method for investigation of nanoparticle clearance from circulation in a liver perfusion model

Nanoparticles (NPs) are among the most promising agents for advanced theranostics. However, their functioning in vivo is severely inhibited by the mononuclear phagocyte system (MPS), which rapidly removes all foreign entities from blood circulation. Little is known about the sequestration mechanisms and the ways to counteract them. New methods are highly demanded for investigation with high scrutiny of each aspect of NP clearance from blood. For example, while liver macrophages capture the majority of the administered particles, reliable investigation of this process in absence of other MPS components is hard to implement in vivo. Here, we demonstrate a novel method for real-time investigation hepatic uptake of NPs in an isolated perfused liver based on an extremely accurate magnetometric registration technique. The signal is obtained solely from the magnetic NPs without any 'background' from blood or tissues, which is a significant advantage over other techniques, e.g. optical ones. We illustrate the method capacity by investigation of behavior of different particles and show good correlation with in vivo studies. We also demonstrate notable suitability of the method for studying the NP clearance from the flow in the user-defined mediums, e.g. those containing specific serum components. Finally, the method was applied to reveal an interesting effect of short-term decrease of liver macrophage activity after the first interaction with small amounts of NPs. The developed perfusion model based on the high-performance magnetometry can be used for finding new mechanisms of NP sequestration and for development of novel 'stealth' nanoagents.

Thin-Shelled PEGylated Perfluorooctyl Bromide Nanocapsules for Tumor-Targeted Ultrasound Contrast Agent

Shell thickness determines the acoustic response of polymer-based perfluorooctyl bromide (PFOB) nanocapsule ultrasound contrast agents. PEGylation provides stealth property and arms for targeting moieties. We investigated a modulation in the polymer formulation of carboxy-terminated poly(d,l-lactide-co-glycolide) (PLGA) and poly(d,l-lactide-co-glycolide)-block-polyethylene glycol (PLGA-b-PEG) to produce thin-shelled PFOB nanocapsules while keeping its echogenicity, stealth property, and active targeting potential. Polymer formulation contains 40% PLGA-PEG that yields the PEGylated PFOB nanocapsules of approximately 150 nm size with average thickness-to-radius ratio down to 0.15, which adequately hindered phagocytosis. Functionalization with antibody enables in vitro tumor-specific targeting. Despite the acoustic response improvement, the in vivo tumor accumulation was inadequate to generate an observable acoustic response to the ultrasound power at the clinical level. The use of PLGA and PLGA-PEG polymer blend allows the production of thin-shelled PFOB nanocapsules with echogenicity improvement while maintaining its potential for specific targeting.

Cross-Linked Aptamer-Lipid Micelles for Excellent Stability and Specificity in Target-Cell Recognition

The specific binding ability of DNA-lipid micelles (DLMs) can be increased by the introduction of an aptamer. However, supramolecular micellar structures based on self-assemblies of amphiphilic DLMs are expected to demonstrate low stability when interacting with cell membranes under certain conditions, which could lead to a reduction in selectivity for targeting cancer cells. We herein report a straightforward cross-linking strategy that relies on a methacrylamide branch to link aptamer and lipid segments. By an efficient photoinduced polymerization process, covalently linked aptamer-lipid units help stabilize the micelle structure and enhance aptamer probe stability, further improving the targeting ability of the resulting nanoassembly. Besides the development of a facile cross-linking method, this study clarifies the relationship between aptamer-lipid concentration and the corresponding binding ability.

Pretargeting in nuclear imaging and radionuclide therapy: Improving efficacy of theranostics and nanomedicines

Pretargeted nuclear imaging and radiotherapy have recently attracted increasing attention for diagnosis and treatment of cancer with nanomedicines. This is because it conceptually offers better imaging contrast and therapeutic efficiency while reducing the dose to radiosensitive tissues compared to conventional strategies. In conventional imaging and radiotherapy, a directly radiolabeled nano-sized vector is administered and allowed to accumulate in the tumor, typically on a timescale of several days. In contrast, pretargeting is based on a two-step approach. First, a tumor-accumulating vector carrying a tag is administered followed by injection of a fast clearing radiolabeled agent that rapidly recognizes the tag of the tumor-bound vector in vivo. Therefore, pretargeting circumvents the use of long-lived radionuclides that is a necessity for sufficient tumor accumulation and target-to-background ratios using conventional approaches. In this review, we give an overview of recent advances in pretargeted imaging strategies. We will critically reflect on the advantages and disadvantages of current state-of-the-art conventional imaging approaches and compare them to pretargeted strategies. We will discuss the pretargeted imaging concept and the involved chemistry. Finally, we will discuss the steps forward in respect to clinical translation, and how pretargeted strategies could be applied to improve state-of-the-art radiotherapeutic approaches.

Predicting the impact of structural diversity on the performance of nanodiamond drug carriers

Diamond nanoparticles (nanodiamonds) are unique among carbon nanomaterials, and are quickly establishing a niché in the biomedical application domain. Nanodiamonds are non-toxic, amenable to economically viable mass production, and can be interfaced with a variety of functional moieties. However, developmental challenges arise due to the chemical complexity and structural diversity inherent in nanodiamond samples. Nanodiamonds present a narrow, but significant, distribution of sizes, a dizzying array of possible shapes, and a complicated surface containing aliphatic and aromatic carbon. In the past these facts have been cast as hindrances, stalling development until perfectly monodispersed samples could be achieved. Current research has moved in a different direction, exploring ways that the polydispersivity of nanodiamond samples can be used as a new degree of engineering freedom, and understanding the impact our limited synthetic control really has upon structure/property relationships. In this review a series of computational and statistical studies will be summarised and reviewed, to characterise the relationship between chemical complexity, structural diversity and the reactive performance of nanodiamond drug carriers.

Micelle-templated, poly(lactic-co-glycolic acid) nanoparticles for hydrophobic drug delivery

PURPOSE

Poly(lactic-co-glycolic acid) (PLGA) is widely used for drug delivery because of its biocompatibility, ability to solubilize a wide variety of drugs, and tunable degradation. However, achieving sub-100 nm nanoparticles (NPs), as might be desired for delivery via the enhanced permeability and retention effect, is extremely difficult via typical top-down emulsion approaches.

METHODS

Here, we present a bottom-up synthesis method yielding PLGA/block copolymer hybrids (ie, "PolyDots"), consisting of hydrophobic PLGA chains entrapped within self-assembling poly(styrene-b-ethylene oxide) (PS-b-PEO) micelles.

RESULTS

PolyDots exhibit average diameters <50 nm and lower polydispersity than conventional PLGA NPs. Drug encapsulation efficiencies of PolyDots match conventional PLGA NPs (ie, ~30%) and are greater than those obtained from PS-b-PEO micelles (ie, ~7%). Increasing the PLGA:PS-b-PEO weight ratio alters the drug release mechanism from chain relaxation to erosion controlled. PolyDots are taken up by model glioma cells via endocytotic mechanisms within 24 hours, providing a potential means for delivery to cytoplasm. PolyDots can be lyophilized with minimal change in morphology and encapsulant functionality, and can be produced at scale using electrospray.

CONCLUSION

Encapsulation of PLGA within micelles provides a bottom-up route for the synthesis of sub-100 nm PLGA-based nanocarriers with enhanced stability and drug-loading capacity, and tunable drug release, suitable for potential clinical applications.

Photo Irradiation-Induced Core Crosslinked Poly(ethylene glycol)-block-poly(aspartic acid) Micelles: Optimization of Block Copolymer Synthesis and Characterization of Core Crosslinked Micelles

We used photo irradiation to design core crosslinked polymeric micelles whose only significant physico-chemical change was in their physico-chemical stability, which helps elucidate poly(ethylene glycol) (PEG)-related immunogenicity. Synthetic routes and compositions of PEG-b-poly(aspartic acid) block copolymers were optimized with the control of n-alkyl chain length and photo-sensitive chalcone moieties. The conjugation ratio between n-alkyl chain and the chalcone moieties was controlled, and upon the mild photo irradiation of polymeric micelles, permanent crosslink proceeded in the micelle cores. In the optimized condition, the core crosslinked (CCL) micelles exhibited no dissociation while the non-CCL micelles exhibited dissociation. These results indicate that the photo-crosslinking reactions in the inner core were successful. A gel-permeation chromatography (GPC) measurement revealed a difference between the micellar-formation stability of CCL micelles and that of the non-CCL micelles. GPC experiments revealed that the CCL micelles were more stable than the non-CCL micelles. Our research also revealed that photo-crosslinking reactions did not change the core property for drug encapsulation. In conclusion, the prepared CCL micelles exhibited the same diameter, the same formula, and the same inner-core properties for drug encapsulation as did the non-CCL micelles. Moreover, the CCL micelles exhibited non-dissociable micelle formation, while the non-CCL micelles exhibited dissociation into single block copolymers.

Stabilizers influence drug-polymer interactions and physicochemical properties of disulfiram-loaded poly-lactide-co-glycolide nanoparticles

Aim:

Stabilizers are known to be an integral component of polymeric nanostructures. Ideally, they manipulate physicochemical properties of nanoparticles. Based on this hypothesis, we demonstrated that disulfiram (drug) and Poly-lactide-co-glycolide (polymer) interactions and physicochemical properties of their nanoparticles formulations are significantly influenced by the choice of stabilizers.

Methodology:

Electron microscopy, differential scanning calorimetry, x-ray diffraction, Raman spectrum analysis, isothermal titration calorimetry and in silico docking studies were performed.

Results & discussion:

Polysorbate 80 imparted highest crystallinity while Triton-X 100 imparted highest rigidity, possibly influencing drug bioavailability, blood-retention time, cellular uptake and sustained drug release. All the molecular interactions were hydrophobic in nature and entropy driven. Therefore, polymeric nanoparticles may be critically manipulated to streamline the passive targeting of drug-loaded nanoparticles.

Polymeric nanoparticles are futuristic drug-delivering platforms that have many potential advantages above conventional drug-delivery tools. They are mainly composed of a polymer, stabilizer and the therapeutic ingredient. A number of researches are on-going to improvise various characteristics of polymeric nanoparticles, in order to enhance its efficacy. The current study is one such domain where we emphasize on identifying potential stabilizing factors that are involved in nanoparticles formation and their drug entrapment and release properties.

In vivo evaluation of cetuximab-conjugated poly(γ-glutamic acid)-docetaxel nanomedicines in EGFR-overexpressing gastric cancer xenografts

Epidermal growth factor receptor (EGFR), upregulated in gastric cancer patients, is an oncogene of interest in the development of targeted cancer nanomedicines. This study demonstrates in silico modeling of monoclonal antibody cetuximab (CET MAb)-conjugated docetaxel (DOCT)-loaded poly(γ-glutamic acid) (γ-PGA) nanoparticles (Nps) and evaluates the in vitro/in vivo effects on EGFR-overexpressing gastric cancer cells (MKN-28). Nontargeted DOCT-γ-PGA Nps (NT Nps: 110±40 nm) and targeted CET MAb-DOCT-γ-PGA Nps (T Nps: 200±20 nm) were prepared using ionic gelation followed by 1-Ethyl-3-(3-dimethyl aminopropyl)carbodiimide–N-Hydoxysuccinimide (EDC–NSH) chemistry. Increased uptake correlated with enhanced cytotoxicity induced by targeted Nps to EGFR +ve MKN-28 compared with nontargeted Nps as evident from MTT and flow cytometric assays. Nanoformulated DOCT showed a superior pharmacokinetic profile to that of free DOCT in Swiss albino mice, indicating the possibility of improved therapeutic effect in the disease model. Qualitative in vivo imaging showed early and enhanced tumor targeted accumulation of CET MAb-DOCT-γ-PGA Nps in EGFR +ve MKN-28–based gastric cancer xenograft, which exhibited efficient arrest of tumor growth compared with nontargeted Nps and free DOCT. Thus, actively targeted CET MAb-DOCT-γ-PGA Nps could be developed as a substitute to conventional nonspecific chemotherapy, and hence could become a feasible strategy for cancer therapy for EGFR-overexpressing gastric tumors.

"Click" hyaluronan based nanohydrogels as multifunctionalizable carriers for hydrophobic drugs

Highly hydrophilic and biocompatible nanocarriers based on polysaccharide hydrogels (nanohydrogels, NHs) were shown to be promising systems for drug delivery applications. Following the idea of these emerging drug carriers, the aim of the present work was to develop self-assembled hydrogel nanoparticles based on amphiphilic derivatives of hyaluronic acid (HA) and riboflavin (Rfv), synthesized by "click" Copper(I)-catalyzed Azide-Alkyne Cycloaddition (CuAAC) reaction. The obtained amphiphilic product (HA-c-Rfv) was able to form nanohydrogels in aqueous environments, in particular by applying an innovative autoclave-based method. HA of different molecular weights (M_w) and degrees of substitution (DS) were prepared and the effect of these parameters on the NHs formation was assessed. The derivative HA²²⁰-c-Rfv 40/40 was chosen as the most interesting system, capable to form NHs in the range of 150-200nm and with a negative ζ-potential. NHs were very stable in water solutions and, by adding dextrose as cryoprotectant, it was also possible to freeze-dry the NHs formulation. The developed system is proposed for the delivery of hydrophobic drugs; for this purpose, dexamethasone, piroxicam and paclitaxel were used as model drugs; these molecules were loaded into NHs with high efficiency by film-hydration technique. Furthermore, a HA-c-Rfv derivative bearing an excess of propargylic portions was capable to react with other N₃-derivatized molecules, opening the route to a wide spectrum of functionalization opportunities: in this direction, PEG-N₃ has been tested as a model molecule for the preparation of PEGylated NHs.

Balancing the intermolecular forces in peptide amphiphiles for controlling self-assembly transitions

While the influence of alkyl chain length and headgroup size on self-assembly behaviour has been well-established for simple surfactants, the rational control over the pH- and concentration-dependent self-assembly behaviour in stimuli responsive peptides remains an elusive goal. Here, we show that different amphiphilic peptides can have similar self-assembly phase diagrams, providing the relative strengths of the attractive and repulsive forces are balanced. Using palmitoyl-YYAAEEEEK(DO3A:Gd)-NH2 and palmitoyl-YAAEEEEK(DO3A:Gd)-NH2 as controls, we show that reducing hydrophobic attractive forces through fewer methylene groups in the alkyl chain will lead to a similar self-assembly phase diagram as increasing the electrostatic repulsive forces via the addition of a glutamic acid residue. These changes allow creation of self-assembled MRI vehicles with slightly different micelle and nanofiber diameters but with minimal changes in the spin-lattice T1 relaxivity. These findings reveal a powerful strategy to design self-assembled vehicles with different sizes but with similar self-assembly profiles.

Intrinsic and Stable Conjugation of Thiolated Mesoporous Silica Nanoparticles with Radioarsenic

The development of new image-guided drug delivery tools to improve the therapeutic efficacy of chemotherapeutics remains an important goal in nanomedicine. Using labeling strategies that involve radioelements that have theranostic pairs of diagnostic positron-emitting isotopes and therapeutic electron-emitting isotopes has promise in achieving this goal and further enhancing drug performance through radiotherapeutic effects. The isotopes of radioarsenic offer such theranostic potential and would allow for the use of positron emission tomography (PET) for image-guided drug delivery studies of the arsenic-based chemotherapeutic arsenic trioxide (ATO). Thiolated mesoporous silica nanoparticles (MSN) are shown to effectively and stably bind cyclotron-produced radioarsenic. Labeling studies elucidate that this affinity is a result of specific binding between trivalent arsenic and nanoparticle thiol surface modification. Serial PET imaging of the in vivo murine biodistribution of radiolabeled silica nanoparticles shows very good stability toward dearsenylation that is directly proportional to silica porosity. Thiolated MSNs are found to have a macroscopic arsenic loading capacity of 20 mg of ATO per gram of MSN, sufficient for delivery of chemotherapeutic quantities of the drug. These results show the great potential of radioarsenic-labeled thiolated MSN for the preparation of theranostic radiopharmaceuticals and image-guided drug delivery of ATO-based chemotherapeutics.

Heterogeneous PEGylation of diamond nanoparticles

Coating the surfaces of inorganic nanoparticles with polyethylene glycol (PEG) is an important step in the development of many nanoparticle-based drug delivery systems. The efficiency with which drug molecules can be loaded on to nanoparticle surfaces is contingent on the concentration, distribution and stability of the PEG coating. In this study the distribution and relative stability of PEG on diamond nanoparticles is predicted, for clean and passivated surface structures, in 3D. This is an ideal exemplar, since PEGylated diamond nanoparticles are already being trialed as carriers for doxorubicin (DOX). The results show that PEGylation is favorable near the {100} facets regardless of surface reconstructions or pre-treatment, but pre-treatment is required to increase the probability of stable and homogeneous PEGylation on other facets.

Design of polymer conjugated 3-helix micelles as nanocarriers with tunable shapes

Amphiphilic peptide-polymer conjugates have the ability to form stable nanoscale micelles, which show great promise for drug delivery and other applications. A recent design has utilized the end-conjugation of alkyl chains to 3-helix coiled coils to achieve amphiphilicity, combined with the side-chain conjugation of polyethylene glycol (PEG) to tune micelle size through entropic confinement forces. Here we investigate this phenomenon in depth, using coarse-grained dissipative particle dynamics (DPD) simulations in an explicit solvent and micelle theory. We analyze the conformations of PEG chains conjugated to three different positions on 3-helix bundle peptides to ascertain the degree of confinement upon assembly, as well as the ordering of the subunits making up the micelle. We discover that the micelle size and stability is dictated by a competition between the entropy of PEG chain conformations in the assembled state, as well as intermolecular cross-interactions among PEG chains that promote cohesion between neighboring conjugates. Our analyses build on the role of PEG molecular weight and conjugation site and lead to computational phase diagrams that can be used to design 3-helix micelles. This work opens pathways for the design of multifunctional micelles with tunable size, shape and stability.

In vivo fate tracking of degradable nanoparticles for lung gene transfer using PET and Ĉerenkov imaging

Nanoparticles (NPs) play expanding roles in biomedical applications including imaging and therapy, however, their long-term fate and clearance profiles have yet to be fully characterized in vivo. NP delivery via the airway is particularly challenging, as the clearance may be inefficient and lung immune responses complex. Thus, specific material design is required for cargo delivery and quantitative, noninvasive methods are needed to characterize NP pharmacokinetics. Here, biocompatible poly(acrylamidoethylamine)-b-poly(dl-lactide) block copolymer-based degradable, cationic, shell-cross-linked knedel-like NPs (Dg-cSCKs) were employed to transfect plasmid DNA. Radioactive and optical beacons were attached to monitor biodistribution and imaging. The preferential release of cargo in acidic conditions provided enhanced transfection efficiency compared to non-degradable counterparts. In vivo gene transfer to the lung was correlated with NP pharmacokinetics by radiolabeling Dg-cSCKs and performing quantitative biodistribution with parallel positron emission tomography and Čerenkov imaging. Quantitation of imaging over 14 days corresponded with the pharmacokinetics of NP movement from the lung to gastrointestinal and renal routes, consistent with predicted degradation and excretion. This ability to noninvasively and accurately track NP fate highlights the advantage of incorporating multifunctionality into particle design.

New Bifunctional Chelator p-SCN-PhPr-NE3TA for Copper-64: Synthesis, Peptidomimetic Conjugation, Radiolabeling, and Evaluation for PET Imaging

Bifunctional chelators play an important role in developing metallic radionuclide-based radiopharmaceuticals. In this study, a new bifunctional ligand, p-SCN-PhPr-NE3TA, was synthesized and conjugated to a very late antigen-4 targeting peptidomimetic, LLP2A, for evaluating its application in (64)Cu-based positron emission tomography (PET) imaging. The new ligand exhibited strong selective coordination of Cu(II), leading to a robust Cu complex, even in the presence of 10-fold Fe(III). The LLP2A conjugate of p-SCN-PhPr-NE3TA was prepared and successfully labeled with (64)Cu under mild conditions. The conjugate (64)Cu-NE3TA-PEG4-LLP2A showed significantly higher specific activity, compared with (64)Cu-NOTA-PEG4-LLP2A, while maintaining comparable serum stability. Subsequent biodistribution studies and PET imaging in mice bearing B16F10 xenografts confirmed its favorable in vivo performance and high tumor uptake with low background, rendering p-SCN-PhPr-NE3TA a promising bifunctional chelator for (64)Cu-based radiopharmaceuticals.

Copper-64 Radiopharmaceuticals for Oncologic Imaging

The positron emitting radionuclide (64)Cu has a radioactive half-life of 12.7 hours. The decay characteristics of (64)Cu allow for PET images that are comparable in quality to those obtained using (18)F. Given the longer radioactive half-life of (64)Cu compared with (18)F and the versatility of copper chemistry, copper is an attractive alternative to the shorter-lived nuclides for PET imaging of peptides, antibodies, and small molecules that may require longer circulation times. This article discusses a number of copper radiopharmaceuticals, such as Cu-ATSM, that have been translated to the clinic and new developments in copper-based radiopharmaceuticals.

The effect of nanoparticle size on in vivo pharmacokinetics and cellular interaction

Nanoparticle-based technologies offer exciting new approaches to disease diagnostics and therapeutics. To take advantage of unique properties of nanoscale materials and structures, the size, shape and/or surface chemistry of nanoparticles need to be optimized, allowing their functionalities to be tailored for different biomedical applications. Here we review the effects of nanoparticle size on cellular interaction and in vivo pharmacokinetics, including cellular uptake, biodistribution and circulation half-life of nanoparticles. Important features of nanoparticle probes for molecular imaging and modeling of nanoparticle size effects are also discussed.

Tumor Presence Induces Global Immune Changes and Enhances Nanoparticle Clearance

Long-circulating nanoparticles are essential for increasing tumor accumulation to provide therapeutic efficacy. While it is known that tumor presence can alter the immune system, very few studies have explored this impact on nanoparticle circulation. In this report, we demonstrate how the presence of a tumor can change the local and global immune system, which dramatically increases particle clearance. We found that tumor presence significantly increased clearance of PRINT hydrogel nanoparticles from the circulation, resulting in increased accumulation in the liver and spleen, due to an increase in M2-like macrophages. Our findings highlight the need to better understand interactions between immune status and nanoparticle clearance, and suggest that further consideration of immune function is required for success in preclinical and clinical nanoparticle studies.

Preparation of fluorescent Au–SiO2 core–shell nanoparticles and nanorods with tunable silica shell thickness and surface modification for immunotargeting

Scalable methods for preparing and modifying Au–SiO₂ core–shell nanoparticles provide a platform for engineering size-dependent multifunctional properties for in vivo biomedical applications.

A bistren cryptand with a remote thioether function: Cu(ii) complexation in solution and on the surface of gold nanostars

A di-copper(ii) complex is formed in a bis-tren cage featuring a thioether function, capable of grafting on a monolayer of gold nanostars.